diff options
40 files changed, 5896 insertions, 0 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 224e548f0fc8..705a7a9170f3 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -80,6 +80,21 @@ config BCM47XX help Support for BCM47XX based boards +config BCM63XX + bool "Broadcom BCM63XX based boards" + select CEVT_R4K + select CSRC_R4K + select DMA_NONCOHERENT + select IRQ_CPU + select SYS_HAS_CPU_MIPS32_R1 + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_BIG_ENDIAN + select SYS_HAS_EARLY_PRINTK + select SWAP_IO_SPACE + select ARCH_REQUIRE_GPIOLIB + help + Support for BCM63XX based boards + config MIPS_COBALT bool "Cobalt Server" select CEVT_R4K @@ -645,6 +660,7 @@ endchoice source "arch/mips/alchemy/Kconfig" source "arch/mips/basler/excite/Kconfig" +source "arch/mips/bcm63xx/Kconfig" source "arch/mips/jazz/Kconfig" source "arch/mips/lasat/Kconfig" source "arch/mips/pmc-sierra/Kconfig" diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1efa9aa64880..c825b14b4ed0 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -565,6 +565,13 @@ cflags-$(CONFIG_BCM47XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm47xx load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # +# Broadcom BCM63XX boards +# +core-$(CONFIG_BCM63XX) += arch/mips/bcm63xx/ +cflags-$(CONFIG_BCM63XX) += -I$(srctree)/arch/mips/include/asm/mach-bcm63xx/ +load-$(CONFIG_BCM63XX) := 0xffffffff80010000 + +# # SNI RM # core-$(CONFIG_SNI_RM) += arch/mips/sni/ diff --git a/arch/mips/bcm63xx/Kconfig b/arch/mips/bcm63xx/Kconfig new file mode 100644 index 000000000000..fb177d6df066 --- /dev/null +++ b/arch/mips/bcm63xx/Kconfig @@ -0,0 +1,25 @@ +menu "CPU support" + depends on BCM63XX + +config BCM63XX_CPU_6338 + bool "support 6338 CPU" + select HW_HAS_PCI + select USB_ARCH_HAS_OHCI + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO + +config BCM63XX_CPU_6345 + bool "support 6345 CPU" + select USB_OHCI_BIG_ENDIAN_DESC + select USB_OHCI_BIG_ENDIAN_MMIO + +config BCM63XX_CPU_6348 + bool "support 6348 CPU" + select HW_HAS_PCI + +config BCM63XX_CPU_6358 + bool "support 6358 CPU" + select HW_HAS_PCI +endmenu + +source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/arch/mips/bcm63xx/Makefile b/arch/mips/bcm63xx/Makefile new file mode 100644 index 000000000000..99bbc8753a21 --- /dev/null +++ b/arch/mips/bcm63xx/Makefile @@ -0,0 +1,7 @@ +obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o \ + dev-dsp.o +obj-$(CONFIG_EARLY_PRINTK) += early_printk.o + +obj-y += boards/ + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/bcm63xx/boards/Kconfig b/arch/mips/bcm63xx/boards/Kconfig new file mode 100644 index 000000000000..c6aed33d893e --- /dev/null +++ b/arch/mips/bcm63xx/boards/Kconfig @@ -0,0 +1,11 @@ +choice + prompt "Board support" + depends on BCM63XX + default BOARD_BCM963XX + +config BOARD_BCM963XX + bool "Generic Broadcom 963xx boards" + select SSB + help + +endchoice diff --git a/arch/mips/bcm63xx/boards/Makefile b/arch/mips/bcm63xx/boards/Makefile new file mode 100644 index 000000000000..e5cc86dc1da8 --- /dev/null +++ b/arch/mips/bcm63xx/boards/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o + +EXTRA_CFLAGS += -Werror diff --git a/arch/mips/bcm63xx/boards/board_bcm963xx.c b/arch/mips/bcm63xx/boards/board_bcm963xx.c new file mode 100644 index 000000000000..fd77f548207a --- /dev/null +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c @@ -0,0 +1,837 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/ssb/ssb.h> +#include <asm/addrspace.h> +#include <bcm63xx_board.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> +#include <bcm63xx_board.h> +#include <bcm63xx_dev_pci.h> +#include <bcm63xx_dev_enet.h> +#include <bcm63xx_dev_dsp.h> +#include <board_bcm963xx.h> + +#define PFX "board_bcm963xx: " + +static struct bcm963xx_nvram nvram; +static unsigned int mac_addr_used; +static struct board_info board; + +/* + * known 6338 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6338 +static struct board_info __initdata board_96338gw = { + .name = "96338GW", + .expected_cpu_id = 0x6338, + + .has_enet0 = 1, + .enet0 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, + + .leds = { + { + .name = "adsl", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ses", + .gpio = 5, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + } + }, +}; + +static struct board_info __initdata board_96338w = { + .name = "96338W", + .expected_cpu_id = 0x6338, + + .has_enet0 = 1, + .enet0 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .leds = { + { + .name = "adsl", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ses", + .gpio = 5, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; +#endif + +/* + * known 6345 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6345 +static struct board_info __initdata board_96345gw2 = { + .name = "96345GW2", + .expected_cpu_id = 0x6345, +}; +#endif + +/* + * known 6348 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6348 +static struct board_info __initdata board_96348r = { + .name = "96348R", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_96348gw_10 = { + .name = "96348GW-10", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, + + .has_dsp = 1, + .dsp = { + .gpio_rst = 6, + .gpio_int = 34, + .cs = 2, + .ext_irq = 2, + }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_96348gw_11 = { + .name = "96348GW-11", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_96348gw = { + .name = "96348GW", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, + + .has_dsp = 1, + .dsp = { + .gpio_rst = 6, + .gpio_int = 34, + .ext_irq = 2, + .cs = 2, + }, + + .leds = { + { + .name = "adsl-fail", + .gpio = 2, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 3, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 4, + .active_low = 1, + }, + { + .name = "power", + .gpio = 0, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 1, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_FAST2404 = { + .name = "F@ST2404", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, +}; + +static struct board_info __initdata board_DV201AMR = { + .name = "DV201AMR", + .expected_cpu_id = 0x6348, + + .has_pci = 1, + .has_ohci0 = 1, + + .has_enet0 = 1, + .has_enet1 = 1, + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, +}; + +static struct board_info __initdata board_96348gw_a = { + .name = "96348GW-A", + .expected_cpu_id = 0x6348, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, +}; +#endif + +/* + * known 6358 boards + */ +#ifdef CONFIG_BCM63XX_CPU_6358 +static struct board_info __initdata board_96358vw = { + .name = "96358VW", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, + + .leds = { + { + .name = "adsl-fail", + .gpio = 15, + .active_low = 1, + }, + { + .name = "ppp", + .gpio = 22, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 23, + .active_low = 1, + }, + { + .name = "power", + .gpio = 4, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 5, + }, + }, +}; + +static struct board_info __initdata board_96358vw2 = { + .name = "96358VW2", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + + .has_ohci0 = 1, + .has_pccard = 1, + .has_ehci0 = 1, + + .leds = { + { + .name = "adsl", + .gpio = 22, + .active_low = 1, + }, + { + .name = "ppp-fail", + .gpio = 23, + }, + { + .name = "power", + .gpio = 5, + .active_low = 1, + .default_trigger = "default-on", + }, + { + .name = "stop", + .gpio = 4, + .active_low = 1, + }, + }, +}; + +static struct board_info __initdata board_AGPFS0 = { + .name = "AGPF-S0", + .expected_cpu_id = 0x6358, + + .has_enet0 = 1, + .has_enet1 = 1, + .has_pci = 1, + + .enet0 = { + .has_phy = 1, + .use_internal_phy = 1, + }, + + .enet1 = { + .force_speed_100 = 1, + .force_duplex_full = 1, + }, + + .has_ohci0 = 1, + .has_ehci0 = 1, +}; +#endif + +/* + * all boards + */ +static const struct board_info __initdata *bcm963xx_boards[] = { +#ifdef CONFIG_BCM63XX_CPU_6338 + &board_96338gw, + &board_96338w, +#endif +#ifdef CONFIG_BCM63XX_CPU_6345 + &board_96345gw2, +#endif +#ifdef CONFIG_BCM63XX_CPU_6348 + &board_96348r, + &board_96348gw, + &board_96348gw_10, + &board_96348gw_11, + &board_FAST2404, + &board_DV201AMR, + &board_96348gw_a, +#endif + +#ifdef CONFIG_BCM63XX_CPU_6358 + &board_96358vw, + &board_96358vw2, + &board_AGPFS0, +#endif +}; + +/* + * early init callback, read nvram data from flash and checksum it + */ +void __init board_prom_init(void) +{ + unsigned int check_len, i; + u8 *boot_addr, *cfe, *p; + char cfe_version[32]; + u32 val; + + /* read base address of boot chip select (0) + * 6345 does not have MPI but boots from standard + * MIPS Flash address */ + if (BCMCPU_IS_6345()) + val = 0x1fc00000; + else { + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + } + boot_addr = (u8 *)KSEG1ADDR(val); + + /* dump cfe version */ + cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; + if (!memcmp(cfe, "cfe-v", 5)) + snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u", + cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]); + else + strcpy(cfe_version, "unknown"); + printk(KERN_INFO PFX "CFE version: %s\n", cfe_version); + + /* extract nvram data */ + memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); + + /* check checksum before using data */ + if (nvram.version <= 4) + check_len = offsetof(struct bcm963xx_nvram, checksum_old); + else + check_len = sizeof(nvram); + val = 0; + p = (u8 *)&nvram; + while (check_len--) + val += *p; + if (val) { + printk(KERN_ERR PFX "invalid nvram checksum\n"); + return; + } + + /* find board by name */ + for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { + if (strncmp(nvram.name, bcm963xx_boards[i]->name, + sizeof(nvram.name))) + continue; + /* copy, board desc array is marked initdata */ + memcpy(&board, bcm963xx_boards[i], sizeof(board)); + break; + } + + /* bail out if board is not found, will complain later */ + if (!board.name[0]) { + char name[17]; + memcpy(name, nvram.name, 16); + name[16] = 0; + printk(KERN_ERR PFX "unknown bcm963xx board: %s\n", + name); + return; + } + + /* setup pin multiplexing depending on board enabled device, + * this has to be done this early since PCI init is done + * inside arch_initcall */ + val = 0; + +#ifdef CONFIG_PCI + if (board.has_pci) { + bcm63xx_pci_enabled = 1; + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G2_PCI; + } +#endif + + if (board.has_pccard) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G1_MII_PCCARD; + } + + if (board.has_enet0 && !board.enet0.use_internal_phy) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G3_EXT_MII | + GPIO_MODE_6348_G0_EXT_MII; + } + + if (board.has_enet1 && !board.enet1.use_internal_phy) { + if (BCMCPU_IS_6348()) + val |= GPIO_MODE_6348_G3_EXT_MII | + GPIO_MODE_6348_G0_EXT_MII; + } + + bcm_gpio_writel(val, GPIO_MODE_REG); +} + +/* + * second stage init callback, good time to panic if we couldn't + * identify on which board we're running since early printk is working + */ +void __init board_setup(void) +{ + if (!board.name[0]) + panic("unable to detect bcm963xx board"); + printk(KERN_INFO PFX "board name: %s\n", board.name); + + /* make sure we're running on expected cpu */ + if (bcm63xx_get_cpu_id() != board.expected_cpu_id) + panic("unexpected CPU for bcm963xx board"); +} + +/* + * return board name for /proc/cpuinfo + */ +const char *board_get_name(void) +{ + return board.name; +} + +/* + * register & return a new board mac address + */ +static int board_get_mac_address(u8 *mac) +{ + u8 *p; + int count; + + if (mac_addr_used >= nvram.mac_addr_count) { + printk(KERN_ERR PFX "not enough mac address\n"); + return -ENODEV; + } + + memcpy(mac, nvram.mac_addr_base, ETH_ALEN); + p = mac + ETH_ALEN - 1; + count = mac_addr_used; + + while (count--) { + do { + (*p)++; + if (*p != 0) + break; + p--; + } while (p != mac); + } + + if (p == mac) { + printk(KERN_ERR PFX "unable to fetch mac address\n"); + return -ENODEV; + } + + mac_addr_used++; + return 0; +} + +static struct mtd_partition mtd_partitions[] = { + { + .name = "cfe", + .offset = 0x0, + .size = 0x40000, + } +}; + +static struct physmap_flash_data flash_data = { + .width = 2, + .nr_parts = ARRAY_SIZE(mtd_partitions), + .parts = mtd_partitions, +}; + +static struct resource mtd_resources[] = { + { + .start = 0, /* filled at runtime */ + .end = 0, /* filled at runtime */ + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device mtd_dev = { + .name = "physmap-flash", + .resource = mtd_resources, + .num_resources = ARRAY_SIZE(mtd_resources), + .dev = { + .platform_data = &flash_data, + }, +}; + +/* + * Register a sane SPROMv2 to make the on-board + * bcm4318 WLAN work + */ +#ifdef CONFIG_SSB_PCIHOST +static struct ssb_sprom bcm63xx_sprom = { + .revision = 0x02, + .board_rev = 0x17, + .country_code = 0x0, + .ant_available_bg = 0x3, + .pa0b0 = 0x15ae, + .pa0b1 = 0xfa85, + .pa0b2 = 0xfe8d, + .pa1b0 = 0xffff, + .pa1b1 = 0xffff, + .pa1b2 = 0xffff, + .gpio0 = 0xff, + .gpio1 = 0xff, + .gpio2 = 0xff, + .gpio3 = 0xff, + .maxpwr_bg = 0x004c, + .itssi_bg = 0x00, + .boardflags_lo = 0x2848, + .boardflags_hi = 0x0000, +}; +#endif + +static struct gpio_led_platform_data bcm63xx_led_data; + +static struct platform_device bcm63xx_gpio_leds = { + .name = "leds-gpio", + .id = 0, + .dev.platform_data = &bcm63xx_led_data, +}; + +/* + * third stage init callback, register all board devices. + */ +int __init board_register_devices(void) +{ + u32 val; + + if (board.has_enet0 && + !board_get_mac_address(board.enet0.mac_addr)) + bcm63xx_enet_register(0, &board.enet0); + + if (board.has_enet1 && + !board_get_mac_address(board.enet1.mac_addr)) + bcm63xx_enet_register(1, &board.enet1); + + if (board.has_dsp) + bcm63xx_dsp_register(&board.dsp); + + /* Generate MAC address for WLAN and + * register our SPROM */ +#ifdef CONFIG_SSB_PCIHOST + if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { + memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); + memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); + if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) + printk(KERN_ERR "failed to register fallback SPROM\n"); + } +#endif + + /* read base address of boot chip select (0) */ + if (BCMCPU_IS_6345()) + val = 0x1fc00000; + else { + val = bcm_mpi_readl(MPI_CSBASE_REG(0)); + val &= MPI_CSBASE_BASE_MASK; + } + mtd_resources[0].start = val; + mtd_resources[0].end = 0x1FFFFFFF; + + platform_device_register(&mtd_dev); + + bcm63xx_led_data.num_leds = ARRAY_SIZE(board.leds); + bcm63xx_led_data.leds = board.leds; + + platform_device_register(&bcm63xx_gpio_leds); + + return 0; +} + diff --git a/arch/mips/bcm63xx/clk.c b/arch/mips/bcm63xx/clk.c new file mode 100644 index 000000000000..2c68ee9ccee2 --- /dev/null +++ b/arch/mips/bcm63xx/clk.c @@ -0,0 +1,226 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_clk.h> + +static DEFINE_MUTEX(clocks_mutex); + + +static void clk_enable_unlocked(struct clk *clk) +{ + if (clk->set && (clk->usage++) == 0) + clk->set(clk, 1); +} + +static void clk_disable_unlocked(struct clk *clk) +{ + if (clk->set && (--clk->usage) == 0) + clk->set(clk, 0); +} + +static void bcm_hwclock_set(u32 mask, int enable) +{ + u32 reg; + + reg = bcm_perf_readl(PERF_CKCTL_REG); + if (enable) + reg |= mask; + else + reg &= ~mask; + bcm_perf_writel(reg, PERF_CKCTL_REG); +} + +/* + * Ethernet MAC "misc" clock: dma clocks and main clock on 6348 + */ +static void enet_misc_set(struct clk *clk, int enable) +{ + u32 mask; + + if (BCMCPU_IS_6338()) + mask = CKCTL_6338_ENET_EN; + else if (BCMCPU_IS_6345()) + mask = CKCTL_6345_ENET_EN; + else if (BCMCPU_IS_6348()) + mask = CKCTL_6348_ENET_EN; + else + /* BCMCPU_IS_6358 */ + mask = CKCTL_6358_EMUSB_EN; + bcm_hwclock_set(mask, enable); +} + +static struct clk clk_enet_misc = { + .set = enet_misc_set, +}; + +/* + * Ethernet MAC clocks: only revelant on 6358, silently enable misc + * clocks + */ +static void enetx_set(struct clk *clk, int enable) +{ + if (enable) + clk_enable_unlocked(&clk_enet_misc); + else + clk_disable_unlocked(&clk_enet_misc); + + if (BCMCPU_IS_6358()) { + u32 mask; + + if (clk->id == 0) + mask = CKCTL_6358_ENET0_EN; + else + mask = CKCTL_6358_ENET1_EN; + bcm_hwclock_set(mask, enable); + } +} + +static struct clk clk_enet0 = { + .id = 0, + .set = enetx_set, +}; + +static struct clk clk_enet1 = { + .id = 1, + .set = enetx_set, +}; + +/* + * Ethernet PHY clock + */ +static void ephy_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6358()) + return; + bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable); +} + + +static struct clk clk_ephy = { + .set = ephy_set, +}; + +/* + * PCM clock + */ +static void pcm_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6358()) + return; + bcm_hwclock_set(CKCTL_6358_PCM_EN, enable); +} + +static struct clk clk_pcm = { + .set = pcm_set, +}; + +/* + * USB host clock + */ +static void usbh_set(struct clk *clk, int enable) +{ + if (!BCMCPU_IS_6348()) + return; + bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); +} + +static struct clk clk_usbh = { + .set = usbh_set, +}; + +/* + * SPI clock + */ +static void spi_set(struct clk *clk, int enable) +{ + u32 mask; + + if (BCMCPU_IS_6338()) + mask = CKCTL_6338_SPI_EN; + else if (BCMCPU_IS_6348()) + mask = CKCTL_6348_SPI_EN; + else + /* BCMCPU_IS_6358 */ + mask = CKCTL_6358_SPI_EN; + bcm_hwclock_set(mask, enable); +} + +static struct clk clk_spi = { + .set = spi_set, +}; + +/* + * Internal peripheral clock + */ +static struct clk clk_periph = { + .rate = (50 * 1000 * 1000), +}; + + +/* + * Linux clock API implementation + */ +int clk_enable(struct clk *clk) +{ + mutex_lock(&clocks_mutex); + clk_enable_unlocked(clk); + mutex_unlock(&clocks_mutex); + return 0; +} + +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + mutex_lock(&clocks_mutex); + clk_disable_unlocked(clk); + mutex_unlock(&clocks_mutex); +} + +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return clk->rate; +} + +EXPORT_SYMBOL(clk_get_rate); + +struct clk *clk_get(struct device *dev, const char *id) +{ + if (!strcmp(id, "enet0")) + return &clk_enet0; + if (!strcmp(id, "enet1")) + return &clk_enet1; + if (!strcmp(id, "ephy")) + return &clk_ephy; + if (!strcmp(id, "usbh")) + return &clk_usbh; + if (!strcmp(id, "spi")) + return &clk_spi; + if (!strcmp(id, "periph")) + return &clk_periph; + if (BCMCPU_IS_6358() && !strcmp(id, "pcm")) + return &clk_pcm; + return ERR_PTR(-ENOENT); +} + +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} + +EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/bcm63xx/cpu.c b/arch/mips/bcm63xx/cpu.c new file mode 100644 index 000000000000..6dc43f0483e8 --- /dev/null +++ b/arch/mips/bcm63xx/cpu.c @@ -0,0 +1,345 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/cpu.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> +#include <bcm63xx_irq.h> + +const unsigned long *bcm63xx_regs_base; +EXPORT_SYMBOL(bcm63xx_regs_base); + +const int *bcm63xx_irqs; +EXPORT_SYMBOL(bcm63xx_irqs); + +static u16 bcm63xx_cpu_id; +static u16 bcm63xx_cpu_rev; +static unsigned int bcm63xx_cpu_freq; +static unsigned int bcm63xx_memory_size; + +/* + * 6338 register sets and irqs + */ +static const unsigned long bcm96338_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6338_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6338_PERF_BASE, + [RSET_TIMER] = BCM_6338_TIMER_BASE, + [RSET_WDT] = BCM_6338_WDT_BASE, + [RSET_UART0] = BCM_6338_UART0_BASE, + [RSET_GPIO] = BCM_6338_GPIO_BASE, + [RSET_SPI] = BCM_6338_SPI_BASE, + [RSET_OHCI0] = BCM_6338_OHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6338_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6338_USBH_PRIV_BASE, + [RSET_UDC0] = BCM_6338_UDC0_BASE, + [RSET_MPI] = BCM_6338_MPI_BASE, + [RSET_PCMCIA] = BCM_6338_PCMCIA_BASE, + [RSET_SDRAM] = BCM_6338_SDRAM_BASE, + [RSET_DSL] = BCM_6338_DSL_BASE, + [RSET_ENET0] = BCM_6338_ENET0_BASE, + [RSET_ENET1] = BCM_6338_ENET1_BASE, + [RSET_ENETDMA] = BCM_6338_ENETDMA_BASE, + [RSET_MEMC] = BCM_6338_MEMC_BASE, + [RSET_DDR] = BCM_6338_DDR_BASE, +}; + +static const int bcm96338_irqs[] = { + [IRQ_TIMER] = BCM_6338_TIMER_IRQ, + [IRQ_UART0] = BCM_6338_UART0_IRQ, + [IRQ_DSL] = BCM_6338_DSL_IRQ, + [IRQ_ENET0] = BCM_6338_ENET0_IRQ, + [IRQ_ENET_PHY] = BCM_6338_ENET_PHY_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6338_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6338_ENET0_TXDMA_IRQ, +}; + +/* + * 6345 register sets and irqs + */ +static const unsigned long bcm96345_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6345_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6345_PERF_BASE, + [RSET_TIMER] = BCM_6345_TIMER_BASE, + [RSET_WDT] = BCM_6345_WDT_BASE, + [RSET_UART0] = BCM_6345_UART0_BASE, + [RSET_GPIO] = BCM_6345_GPIO_BASE, + [RSET_SPI] = BCM_6345_SPI_BASE, + [RSET_UDC0] = BCM_6345_UDC0_BASE, + [RSET_OHCI0] = BCM_6345_OHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6345_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6345_USBH_PRIV_BASE, + [RSET_MPI] = BCM_6345_MPI_BASE, + [RSET_PCMCIA] = BCM_6345_PCMCIA_BASE, + [RSET_DSL] = BCM_6345_DSL_BASE, + [RSET_ENET0] = BCM_6345_ENET0_BASE, + [RSET_ENET1] = BCM_6345_ENET1_BASE, + [RSET_ENETDMA] = BCM_6345_ENETDMA_BASE, + [RSET_EHCI0] = BCM_6345_EHCI0_BASE, + [RSET_SDRAM] = BCM_6345_SDRAM_BASE, + [RSET_MEMC] = BCM_6345_MEMC_BASE, + [RSET_DDR] = BCM_6345_DDR_BASE, +}; + +static const int bcm96345_irqs[] = { + [IRQ_TIMER] = BCM_6345_TIMER_IRQ, + [IRQ_UART0] = BCM_6345_UART0_IRQ, + [IRQ_DSL] = BCM_6345_DSL_IRQ, + [IRQ_ENET0] = BCM_6345_ENET0_IRQ, + [IRQ_ENET_PHY] = BCM_6345_ENET_PHY_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6345_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6345_ENET0_TXDMA_IRQ, +}; + +/* + * 6348 register sets and irqs + */ +static const unsigned long bcm96348_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6348_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6348_PERF_BASE, + [RSET_TIMER] = BCM_6348_TIMER_BASE, + [RSET_WDT] = BCM_6348_WDT_BASE, + [RSET_UART0] = BCM_6348_UART0_BASE, + [RSET_GPIO] = BCM_6348_GPIO_BASE, + [RSET_SPI] = BCM_6348_SPI_BASE, + [RSET_OHCI0] = BCM_6348_OHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6348_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6348_USBH_PRIV_BASE, + [RSET_MPI] = BCM_6348_MPI_BASE, + [RSET_PCMCIA] = BCM_6348_PCMCIA_BASE, + [RSET_SDRAM] = BCM_6348_SDRAM_BASE, + [RSET_DSL] = BCM_6348_DSL_BASE, + [RSET_ENET0] = BCM_6348_ENET0_BASE, + [RSET_ENET1] = BCM_6348_ENET1_BASE, + [RSET_ENETDMA] = BCM_6348_ENETDMA_BASE, + [RSET_MEMC] = BCM_6348_MEMC_BASE, + [RSET_DDR] = BCM_6348_DDR_BASE, +}; + +static const int bcm96348_irqs[] = { + [IRQ_TIMER] = BCM_6348_TIMER_IRQ, + [IRQ_UART0] = BCM_6348_UART0_IRQ, + [IRQ_DSL] = BCM_6348_DSL_IRQ, + [IRQ_ENET0] = BCM_6348_ENET0_IRQ, + [IRQ_ENET1] = BCM_6348_ENET1_IRQ, + [IRQ_ENET_PHY] = BCM_6348_ENET_PHY_IRQ, + [IRQ_OHCI0] = BCM_6348_OHCI0_IRQ, + [IRQ_PCMCIA] = BCM_6348_PCMCIA_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6348_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6348_ENET0_TXDMA_IRQ, + [IRQ_ENET1_RXDMA] = BCM_6348_ENET1_RXDMA_IRQ, + [IRQ_ENET1_TXDMA] = BCM_6348_ENET1_TXDMA_IRQ, + [IRQ_PCI] = BCM_6348_PCI_IRQ, +}; + +/* + * 6358 register sets and irqs + */ +static const unsigned long bcm96358_regs_base[] = { + [RSET_DSL_LMEM] = BCM_6358_DSL_LMEM_BASE, + [RSET_PERF] = BCM_6358_PERF_BASE, + [RSET_TIMER] = BCM_6358_TIMER_BASE, + [RSET_WDT] = BCM_6358_WDT_BASE, + [RSET_UART0] = BCM_6358_UART0_BASE, + [RSET_GPIO] = BCM_6358_GPIO_BASE, + [RSET_SPI] = BCM_6358_SPI_BASE, + [RSET_OHCI0] = BCM_6358_OHCI0_BASE, + [RSET_EHCI0] = BCM_6358_EHCI0_BASE, + [RSET_OHCI_PRIV] = BCM_6358_OHCI_PRIV_BASE, + [RSET_USBH_PRIV] = BCM_6358_USBH_PRIV_BASE, + [RSET_MPI] = BCM_6358_MPI_BASE, + [RSET_PCMCIA] = BCM_6358_PCMCIA_BASE, + [RSET_SDRAM] = BCM_6358_SDRAM_BASE, + [RSET_DSL] = BCM_6358_DSL_BASE, + [RSET_ENET0] = BCM_6358_ENET0_BASE, + [RSET_ENET1] = BCM_6358_ENET1_BASE, + [RSET_ENETDMA] = BCM_6358_ENETDMA_BASE, + [RSET_MEMC] = BCM_6358_MEMC_BASE, + [RSET_DDR] = BCM_6358_DDR_BASE, +}; + +static const int bcm96358_irqs[] = { + [IRQ_TIMER] = BCM_6358_TIMER_IRQ, + [IRQ_UART0] = BCM_6358_UART0_IRQ, + [IRQ_DSL] = BCM_6358_DSL_IRQ, + [IRQ_ENET0] = BCM_6358_ENET0_IRQ, + [IRQ_ENET1] = BCM_6358_ENET1_IRQ, + [IRQ_ENET_PHY] = BCM_6358_ENET_PHY_IRQ, + [IRQ_OHCI0] = BCM_6358_OHCI0_IRQ, + [IRQ_EHCI0] = BCM_6358_EHCI0_IRQ, + [IRQ_PCMCIA] = BCM_6358_PCMCIA_IRQ, + [IRQ_ENET0_RXDMA] = BCM_6358_ENET0_RXDMA_IRQ, + [IRQ_ENET0_TXDMA] = BCM_6358_ENET0_TXDMA_IRQ, + [IRQ_ENET1_RXDMA] = BCM_6358_ENET1_RXDMA_IRQ, + [IRQ_ENET1_TXDMA] = BCM_6358_ENET1_TXDMA_IRQ, + [IRQ_PCI] = BCM_6358_PCI_IRQ, +}; + +u16 __bcm63xx_get_cpu_id(void) +{ + return bcm63xx_cpu_id; +} + +EXPORT_SYMBOL(__bcm63xx_get_cpu_id); + +u16 bcm63xx_get_cpu_rev(void) +{ + return bcm63xx_cpu_rev; +} + +EXPORT_SYMBOL(bcm63xx_get_cpu_rev); + +unsigned int bcm63xx_get_cpu_freq(void) +{ + return bcm63xx_cpu_freq; +} + +unsigned int bcm63xx_get_memory_size(void) +{ + return bcm63xx_memory_size; +} + +static unsigned int detect_cpu_clock(void) +{ + unsigned int tmp, n1 = 0, n2 = 0, m1 = 0; + + /* BCM6338 has a fixed 240 Mhz frequency */ + if (BCMCPU_IS_6338()) + return 240000000; + + /* BCM6345 has a fixed 140Mhz frequency */ + if (BCMCPU_IS_6345()) + return 140000000; + + /* + * frequency depends on PLL configuration: + */ + if (BCMCPU_IS_6348()) { + /* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */ + tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG); + n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT; + n2 = (tmp & MIPSPLLCTL_N2_MASK) >> MIPSPLLCTL_N2_SHIFT; + m1 = (tmp & MIPSPLLCTL_M1CPU_MASK) >> MIPSPLLCTL_M1CPU_SHIFT; + n1 += 1; + n2 += 2; + m1 += 1; + } + + if (BCMCPU_IS_6358()) { + /* 16MHz * N1 * N2 / M1_CPU */ + tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG); + n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT; + n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT; + m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT; + } + + return (16 * 1000000 * n1 * n2) / m1; +} + +/* + * attempt to detect the amount of memory installed + */ +static unsigned int detect_memory_size(void) +{ + unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; + u32 val; + + if (BCMCPU_IS_6345()) + return (8 * 1024 * 1024); + + if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { + val = bcm_sdram_readl(SDRAM_CFG_REG); + rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT; + cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT; + is_32bits = (val & SDRAM_CFG_32B_MASK) ? 1 : 0; + banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1; + } + + if (BCMCPU_IS_6358()) { + val = bcm_memc_readl(MEMC_CFG_REG); + rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT; + cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT; + is_32bits = (val & MEMC_CFG_32B_MASK) ? 0 : 1; + banks = 2; + } + + /* 0 => 11 address bits ... 2 => 13 address bits */ + rows += 11; + + /* 0 => 8 address bits ... 2 => 10 address bits */ + cols += 8; + + return 1 << (cols + rows + (is_32bits + 1) + banks); +} + +void __init bcm63xx_cpu_init(void) +{ + unsigned int tmp, expected_cpu_id; + struct cpuinfo_mips *c = ¤t_cpu_data; + + /* soc registers location depends on cpu type */ + expected_cpu_id = 0; + + switch (c->cputype) { + /* + * BCM6338 as the same PrId as BCM3302 see arch/mips/kernel/cpu-probe.c + */ + case CPU_BCM3302: + expected_cpu_id = BCM6338_CPU_ID; + bcm63xx_regs_base = bcm96338_regs_base; + bcm63xx_irqs = bcm96338_irqs; + break; + case CPU_BCM6345: + expected_cpu_id = BCM6345_CPU_ID; + bcm63xx_regs_base = bcm96345_regs_base; + bcm63xx_irqs = bcm96345_irqs; + break; + case CPU_BCM6348: + expected_cpu_id = BCM6348_CPU_ID; + bcm63xx_regs_base = bcm96348_regs_base; + bcm63xx_irqs = bcm96348_irqs; + break; + case CPU_BCM6358: + expected_cpu_id = BCM6358_CPU_ID; + bcm63xx_regs_base = bcm96358_regs_base; + bcm63xx_irqs = bcm96358_irqs; + break; + } + + /* + * really early to panic, but delaying panic would not help since we + * will never get any working console + */ + if (!expected_cpu_id) + panic("unsupported Broadcom CPU"); + + /* + * bcm63xx_regs_base is set, we can access soc registers + */ + + /* double check CPU type */ + tmp = bcm_perf_readl(PERF_REV_REG); + bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; + bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; + + if (bcm63xx_cpu_id != expected_cpu_id) + panic("bcm63xx CPU id mismatch"); + + bcm63xx_cpu_freq = detect_cpu_clock(); + bcm63xx_memory_size = detect_memory_size(); + + printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n", + bcm63xx_cpu_id, bcm63xx_cpu_rev); + printk(KERN_INFO "CPU frequency is %u MHz\n", + bcm63xx_cpu_freq / 1000000); + printk(KERN_INFO "%uMB of RAM installed\n", + bcm63xx_memory_size >> 20); +} diff --git a/arch/mips/bcm63xx/cs.c b/arch/mips/bcm63xx/cs.c new file mode 100644 index 000000000000..50d8190bbf7b --- /dev/null +++ b/arch/mips/bcm63xx/cs.c @@ -0,0 +1,144 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/log2.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_cs.h> + +static DEFINE_SPINLOCK(bcm63xx_cs_lock); + +/* + * check if given chip select exists + */ +static int is_valid_cs(unsigned int cs) +{ + if (cs > 6) + return 0; + return 1; +} + +/* + * Configure chipselect base address and size (bytes). + * Size must be a power of two between 8k and 256M. + */ +int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + /* sanity check on size */ + if (size != roundup_pow_of_two(size)) + return -EINVAL; + + if (size < 8 * 1024 || size > 256 * 1024 * 1024) + return -EINVAL; + + val = (base & MPI_CSBASE_BASE_MASK); + /* 8k => 0 - 256M => 15 */ + val |= (ilog2(size) - ilog2(8 * 1024)) << MPI_CSBASE_SIZE_SHIFT; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + bcm_mpi_writel(val, MPI_CSBASE_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_base); + +/* + * configure chipselect timing (ns) + */ +int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait, + unsigned int setup, unsigned int hold) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + val &= ~(MPI_CSCTL_WAIT_MASK); + val &= ~(MPI_CSCTL_SETUP_MASK); + val &= ~(MPI_CSCTL_HOLD_MASK); + val |= wait << MPI_CSCTL_WAIT_SHIFT; + val |= setup << MPI_CSCTL_SETUP_SHIFT; + val |= hold << MPI_CSCTL_HOLD_SHIFT; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_timing); + +/* + * configure other chipselect parameter (data bus size, ...) + */ +int bcm63xx_set_cs_param(unsigned int cs, u32 params) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + /* none of this fields apply to pcmcia */ + if (cs == MPI_CS_PCMCIA_COMMON || + cs == MPI_CS_PCMCIA_ATTR || + cs == MPI_CS_PCMCIA_IO) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + val &= ~(MPI_CSCTL_DATA16_MASK); + val &= ~(MPI_CSCTL_SYNCMODE_MASK); + val &= ~(MPI_CSCTL_TSIZE_MASK); + val &= ~(MPI_CSCTL_ENDIANSWAP_MASK); + val |= params; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_param); + +/* + * set cs status (enable/disable) + */ +int bcm63xx_set_cs_status(unsigned int cs, int enable) +{ + unsigned long flags; + u32 val; + + if (!is_valid_cs(cs)) + return -EINVAL; + + spin_lock_irqsave(&bcm63xx_cs_lock, flags); + val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); + if (enable) + val |= MPI_CSCTL_ENABLE_MASK; + else + val &= ~MPI_CSCTL_ENABLE_MASK; + bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); + spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_set_cs_status); diff --git a/arch/mips/bcm63xx/dev-dsp.c b/arch/mips/bcm63xx/dev-dsp.c new file mode 100644 index 000000000000..da46d1d3c77c --- /dev/null +++ b/arch/mips/bcm63xx/dev-dsp.c @@ -0,0 +1,56 @@ +/* + * Broadcom BCM63xx VoIP DSP registration + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <bcm63xx_cpu.h> +#include <bcm63xx_dev_dsp.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> + +static struct resource voip_dsp_resources[] = { + { + .start = -1, /* filled at runtime */ + .end = -1, /* filled at runtime */ + .flags = IORESOURCE_MEM, + }, + { + .start = -1, /* filled at runtime */ + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bcm63xx_voip_dsp_device = { + .name = "bcm63xx-voip-dsp", + .id = 0, + .num_resources = ARRAY_SIZE(voip_dsp_resources), + .resource = voip_dsp_resources, +}; + +int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd) +{ + struct bcm63xx_dsp_platform_data *dpd; + u32 val; + + /* Get the memory window */ + val = bcm_mpi_readl(MPI_CSBASE_REG(pd->cs - 1)); + val &= MPI_CSBASE_BASE_MASK; + voip_dsp_resources[0].start = val; + voip_dsp_resources[0].end = val + 0xFFFFFFF; + voip_dsp_resources[1].start = pd->ext_irq; + + /* copy given platform data */ + dpd = bcm63xx_voip_dsp_device.dev.platform_data; + memcpy(dpd, pd, sizeof (*pd)); + + return platform_device_register(&bcm63xx_voip_dsp_device); +} diff --git a/arch/mips/bcm63xx/early_printk.c b/arch/mips/bcm63xx/early_printk.c new file mode 100644 index 000000000000..bf353c937df2 --- /dev/null +++ b/arch/mips/bcm63xx/early_printk.c @@ -0,0 +1,30 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +static void __init wait_xfered(void) +{ + unsigned int val; + + /* wait for any previous char to be transmitted */ + do { + val = bcm_uart0_readl(UART_IR_REG); + if (val & UART_IR_STAT(UART_IR_TXEMPTY)) + break; + } while (1); +} + +void __init prom_putchar(char c) +{ + wait_xfered(); + bcm_uart0_writel(c, UART_FIFO_REG); + wait_xfered(); +} diff --git a/arch/mips/bcm63xx/gpio.c b/arch/mips/bcm63xx/gpio.c new file mode 100644 index 000000000000..87ca39046334 --- /dev/null +++ b/arch/mips/bcm63xx/gpio.c @@ -0,0 +1,134 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> + +#include <bcm63xx_cpu.h> +#include <bcm63xx_gpio.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> + +static DEFINE_SPINLOCK(bcm63xx_gpio_lock); +static u32 gpio_out_low, gpio_out_high; + +static void bcm63xx_gpio_set(struct gpio_chip *chip, + unsigned gpio, int val) +{ + u32 reg; + u32 mask; + u32 *v; + unsigned long flags; + + if (gpio >= chip->ngpio) + BUG(); + + if (gpio < 32) { + reg = GPIO_DATA_LO_REG; + mask = 1 << gpio; + v = &gpio_out_low; + } else { + reg = GPIO_DATA_HI_REG; + mask = 1 << (gpio - 32); + v = &gpio_out_high; + } + + spin_lock_irqsave(&bcm63xx_gpio_lock, flags); + if (val) + *v |= mask; + else + *v &= ~mask; + bcm_gpio_writel(*v, reg); + spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); +} + +static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio) +{ + u32 reg; + u32 mask; + + if (gpio >= chip->ngpio) + BUG(); + + if (gpio < 32) { + reg = GPIO_DATA_LO_REG; + mask = 1 << gpio; + } else { + reg = GPIO_DATA_HI_REG; + mask = 1 << (gpio - 32); + } + + return !!(bcm_gpio_readl(reg) & mask); +} + +static int bcm63xx_gpio_set_direction(struct gpio_chip *chip, + unsigned gpio, int dir) +{ + u32 reg; + u32 mask; + u32 tmp; + unsigned long flags; + + if (gpio >= chip->ngpio) + BUG(); + + if (gpio < 32) { + reg = GPIO_CTL_LO_REG; + mask = 1 << gpio; + } else { + reg = GPIO_CTL_HI_REG; + mask = 1 << (gpio - 32); + } + + spin_lock_irqsave(&bcm63xx_gpio_lock, flags); + tmp = bcm_gpio_readl(reg); + if (dir == GPIO_DIR_IN) + tmp &= ~mask; + else + tmp |= mask; + bcm_gpio_writel(tmp, reg); + spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); + + return 0; +} + +static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) +{ + return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN); +} + +static int bcm63xx_gpio_direction_output(struct gpio_chip *chip, + unsigned gpio, int value) +{ + bcm63xx_gpio_set(chip, gpio, value); + return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT); +} + + +static struct gpio_chip bcm63xx_gpio_chip = { + .label = "bcm63xx-gpio", + .direction_input = bcm63xx_gpio_direction_input, + .direction_output = bcm63xx_gpio_direction_output, + .get = bcm63xx_gpio_get, + .set = bcm63xx_gpio_set, + .base = 0, +}; + +int __init bcm63xx_gpio_init(void) +{ + bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count(); + pr_info("registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio); + + return gpiochip_add(&bcm63xx_gpio_chip); +} + +arch_initcall(bcm63xx_gpio_init); diff --git a/arch/mips/bcm63xx/irq.c b/arch/mips/bcm63xx/irq.c new file mode 100644 index 000000000000..a0c5cd18c192 --- /dev/null +++ b/arch/mips/bcm63xx/irq.c @@ -0,0 +1,253 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr> + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <asm/irq_cpu.h> +#include <asm/mipsregs.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> +#include <bcm63xx_irq.h> + +/* + * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not + * prioritize any interrupt relatively to another. the static counter + * will resume the loop where it ended the last time we left this + * function. + */ +static void bcm63xx_irq_dispatch_internal(void) +{ + u32 pending; + static int i; + + pending = bcm_perf_readl(PERF_IRQMASK_REG) & + bcm_perf_readl(PERF_IRQSTAT_REG); + + if (!pending) + return ; + + while (1) { + int to_call = i; + + i = (i + 1) & 0x1f; + if (pending & (1 << to_call)) { + do_IRQ(to_call + IRQ_INTERNAL_BASE); + break; + } + } +} + +asmlinkage void plat_irq_dispatch(void) +{ + u32 cause; + + do { + cause = read_c0_cause() & read_c0_status() & ST0_IM; + + if (!cause) + break; + + if (cause & CAUSEF_IP7) + do_IRQ(7); + if (cause & CAUSEF_IP2) + bcm63xx_irq_dispatch_internal(); + if (cause & CAUSEF_IP3) + do_IRQ(IRQ_EXT_0); + if (cause & CAUSEF_IP4) + do_IRQ(IRQ_EXT_1); + if (cause & CAUSEF_IP5) + do_IRQ(IRQ_EXT_2); + if (cause & CAUSEF_IP6) + do_IRQ(IRQ_EXT_3); + } while (1); +} + +/* + * internal IRQs operations: only mask/unmask on PERF irq mask + * register. + */ +static inline void bcm63xx_internal_irq_mask(unsigned int irq) +{ + u32 mask; + + irq -= IRQ_INTERNAL_BASE; + mask = bcm_perf_readl(PERF_IRQMASK_REG); + mask &= ~(1 << irq); + bcm_perf_writel(mask, PERF_IRQMASK_REG); +} + +static void bcm63xx_internal_irq_unmask(unsigned int irq) +{ + u32 mask; + + irq -= IRQ_INTERNAL_BASE; + mask = bcm_perf_readl(PERF_IRQMASK_REG); + mask |= (1 << irq); + bcm_perf_writel(mask, PERF_IRQMASK_REG); +} + +static unsigned int bcm63xx_internal_irq_startup(unsigned int irq) +{ + bcm63xx_internal_irq_unmask(irq); + return 0; +} + +/* + * external IRQs operations: mask/unmask and clear on PERF external + * irq control register. + */ +static void bcm63xx_external_irq_mask(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg &= ~EXTIRQ_CFG_MASK(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static void bcm63xx_external_irq_unmask(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg |= EXTIRQ_CFG_MASK(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static void bcm63xx_external_irq_clear(unsigned int irq) +{ + u32 reg; + + irq -= IRQ_EXT_BASE; + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg |= EXTIRQ_CFG_CLEAR(irq); + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); +} + +static unsigned int bcm63xx_external_irq_startup(unsigned int irq) +{ + set_c0_status(0x100 << (irq - IRQ_MIPS_BASE)); + irq_enable_hazard(); + bcm63xx_external_irq_unmask(irq); + return 0; +} + +static void bcm63xx_external_irq_shutdown(unsigned int irq) +{ + bcm63xx_external_irq_mask(irq); + clear_c0_status(0x100 << (irq - IRQ_MIPS_BASE)); + irq_disable_hazard(); +} + +static int bcm63xx_external_irq_set_type(unsigned int irq, + unsigned int flow_type) +{ + u32 reg; + struct irq_desc *desc = irq_desc + irq; + + irq -= IRQ_EXT_BASE; + + flow_type &= IRQ_TYPE_SENSE_MASK; + + if (flow_type == IRQ_TYPE_NONE) + flow_type = IRQ_TYPE_LEVEL_LOW; + + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + switch (flow_type) { + case IRQ_TYPE_EDGE_BOTH: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_EDGE_RISING: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_SENSE(irq); + reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_EDGE_FALLING: + reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); + reg &= ~EXTIRQ_CFG_SENSE(irq); + reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); + break; + + case IRQ_TYPE_LEVEL_HIGH: + reg |= EXTIRQ_CFG_LEVELSENSE(irq); + reg |= EXTIRQ_CFG_SENSE(irq); + break; + + case IRQ_TYPE_LEVEL_LOW: + reg |= EXTIRQ_CFG_LEVELSENSE(irq); + reg &= ~EXTIRQ_CFG_SENSE(irq); + break; + + default: + printk(KERN_ERR "bogus flow type combination given !\n"); + return -EINVAL; + } + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + + if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { + desc->status |= IRQ_LEVEL; + desc->handle_irq = handle_level_irq; + } else { + desc->handle_irq = handle_edge_irq; + } + + return 0; +} + +static struct irq_chip bcm63xx_internal_irq_chip = { + .name = "bcm63xx_ipic", + .startup = bcm63xx_internal_irq_startup, + .shutdown = bcm63xx_internal_irq_mask, + + .mask = bcm63xx_internal_irq_mask, + .mask_ack = bcm63xx_internal_irq_mask, + .unmask = bcm63xx_internal_irq_unmask, +}; + +static struct irq_chip bcm63xx_external_irq_chip = { + .name = "bcm63xx_epic", + .startup = bcm63xx_external_irq_startup, + .shutdown = bcm63xx_external_irq_shutdown, + + .ack = bcm63xx_external_irq_clear, + + .mask = bcm63xx_external_irq_mask, + .unmask = bcm63xx_external_irq_unmask, + + .set_type = bcm63xx_external_irq_set_type, +}; + +static struct irqaction cpu_ip2_cascade_action = { + .handler = no_action, + .name = "cascade_ip2", +}; + +void __init arch_init_irq(void) +{ + int i; + + mips_cpu_irq_init(); + for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i) + set_irq_chip_and_handler(i, &bcm63xx_internal_irq_chip, + handle_level_irq); + + for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i) + set_irq_chip_and_handler(i, &bcm63xx_external_irq_chip, + handle_edge_irq); + + setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action); +} diff --git a/arch/mips/bcm63xx/prom.c b/arch/mips/bcm63xx/prom.c new file mode 100644 index 000000000000..fb284fbc5853 --- /dev/null +++ b/arch/mips/bcm63xx/prom.c @@ -0,0 +1,55 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <linux/bootmem.h> +#include <asm/bootinfo.h> +#include <bcm63xx_board.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_gpio.h> + +void __init prom_init(void) +{ + u32 reg, mask; + + bcm63xx_cpu_init(); + + /* stop any running watchdog */ + bcm_wdt_writel(WDT_STOP_1, WDT_CTL_REG); + bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG); + + /* disable all hardware blocks clock for now */ + if (BCMCPU_IS_6338()) + mask = CKCTL_6338_ALL_SAFE_EN; + else if (BCMCPU_IS_6345()) + mask = CKCTL_6345_ALL_SAFE_EN; + else if (BCMCPU_IS_6348()) + mask = CKCTL_6348_ALL_SAFE_EN; + else + /* BCMCPU_IS_6358() */ + mask = CKCTL_6358_ALL_SAFE_EN; + + reg = bcm_perf_readl(PERF_CKCTL_REG); + reg &= ~mask; + bcm_perf_writel(reg, PERF_CKCTL_REG); + + /* assign command line from kernel config */ + strcpy(arcs_cmdline, CONFIG_CMDLINE); + + /* register gpiochip */ + bcm63xx_gpio_init(); + + /* do low level board init */ + board_prom_init(); +} + +void __init prom_free_prom_memory(void) +{ +} diff --git a/arch/mips/bcm63xx/setup.c b/arch/mips/bcm63xx/setup.c new file mode 100644 index 000000000000..b18a0ca926fa --- /dev/null +++ b/arch/mips/bcm63xx/setup.c @@ -0,0 +1,125 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/bootmem.h> +#include <linux/ioport.h> +#include <linux/pm.h> +#include <asm/bootinfo.h> +#include <asm/time.h> +#include <asm/reboot.h> +#include <asm/cacheflush.h> +#include <bcm63xx_board.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_io.h> + +void bcm63xx_machine_halt(void) +{ + printk(KERN_INFO "System halted\n"); + while (1) + ; +} + +static void bcm6348_a1_reboot(void) +{ + u32 reg; + + /* soft reset all blocks */ + printk(KERN_INFO "soft-reseting all blocks ...\n"); + reg = bcm_perf_readl(PERF_SOFTRESET_REG); + reg &= ~SOFTRESET_6348_ALL; + bcm_perf_writel(reg, PERF_SOFTRESET_REG); + mdelay(10); + + reg = bcm_perf_readl(PERF_SOFTRESET_REG); + reg |= SOFTRESET_6348_ALL; + bcm_perf_writel(reg, PERF_SOFTRESET_REG); + mdelay(10); + + /* Jump to the power on address. */ + printk(KERN_INFO "jumping to reset vector.\n"); + /* set high vectors (base at 0xbfc00000 */ + set_c0_status(ST0_BEV | ST0_ERL); + /* run uncached in kseg0 */ + change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); + __flush_cache_all(); + /* remove all wired TLB entries */ + write_c0_wired(0); + __asm__ __volatile__( + "jr\t%0" + : + : "r" (0xbfc00000)); + while (1) + ; +} + +void bcm63xx_machine_reboot(void) +{ + u32 reg; + + /* mask and clear all external irq */ + reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); + reg &= ~EXTIRQ_CFG_MASK_ALL; + reg |= EXTIRQ_CFG_CLEAR_ALL; + bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); + + if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) + bcm6348_a1_reboot(); + + printk(KERN_INFO "triggering watchdog soft-reset...\n"); + bcm_perf_writel(SYS_PLL_SOFT_RESET, PERF_SYS_PLL_CTL_REG); + while (1) + ; +} + +static void __bcm63xx_machine_reboot(char *p) +{ + bcm63xx_machine_reboot(); +} + +/* + * return system type in /proc/cpuinfo + */ +const char *get_system_type(void) +{ + static char buf[128]; + snprintf(buf, sizeof(buf), "bcm63xx/%s (0x%04x/0x%04X)", + board_get_name(), + bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); + return buf; +} + +void __init plat_time_init(void) +{ + mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2; +} + +void __init plat_mem_setup(void) +{ + add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM); + + _machine_halt = bcm63xx_machine_halt; + _machine_restart = __bcm63xx_machine_reboot; + pm_power_off = bcm63xx_machine_halt; + + set_io_port_base(0); + ioport_resource.start = 0; + ioport_resource.end = ~0; + + board_setup(); +} + +int __init bcm63xx_register_devices(void) +{ + return board_register_devices(); +} + +arch_initcall(bcm63xx_register_devices); diff --git a/arch/mips/bcm63xx/timer.c b/arch/mips/bcm63xx/timer.c new file mode 100644 index 000000000000..ba522bdcde4b --- /dev/null +++ b/arch/mips/bcm63xx/timer.c @@ -0,0 +1,205 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/clk.h> +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_timer.h> +#include <bcm63xx_regs.h> + +static DEFINE_SPINLOCK(timer_reg_lock); +static DEFINE_SPINLOCK(timer_data_lock); +static struct clk *periph_clk; + +static struct timer_data { + void (*cb)(void *); + void *data; +} timer_data[BCM63XX_TIMER_COUNT]; + +static irqreturn_t timer_interrupt(int irq, void *dev_id) +{ + u32 stat; + int i; + + spin_lock(&timer_reg_lock); + stat = bcm_timer_readl(TIMER_IRQSTAT_REG); + bcm_timer_writel(stat, TIMER_IRQSTAT_REG); + spin_unlock(&timer_reg_lock); + + for (i = 0; i < BCM63XX_TIMER_COUNT; i++) { + if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i))) + continue; + + spin_lock(&timer_data_lock); + if (!timer_data[i].cb) { + spin_unlock(&timer_data_lock); + continue; + } + + timer_data[i].cb(timer_data[i].data); + spin_unlock(&timer_data_lock); + } + + return IRQ_HANDLED; +} + +int bcm63xx_timer_enable(int id) +{ + u32 reg; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + reg |= TIMER_CTL_ENABLE_MASK; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg |= TIMER_IRQSTAT_TIMER_IR_EN(id); + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_enable); + +int bcm63xx_timer_disable(int id) +{ + u32 reg; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + reg &= ~TIMER_CTL_ENABLE_MASK; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id); + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_disable); + +int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data) +{ + unsigned long flags; + int ret; + + if (id >= BCM63XX_TIMER_COUNT || !callback) + return -EINVAL; + + ret = 0; + spin_lock_irqsave(&timer_data_lock, flags); + if (timer_data[id].cb) { + ret = -EBUSY; + goto out; + } + + timer_data[id].cb = callback; + timer_data[id].data = data; + +out: + spin_unlock_irqrestore(&timer_data_lock, flags); + return ret; +} + +EXPORT_SYMBOL(bcm63xx_timer_register); + +void bcm63xx_timer_unregister(int id) +{ + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return; + + spin_lock_irqsave(&timer_data_lock, flags); + timer_data[id].cb = NULL; + spin_unlock_irqrestore(&timer_data_lock, flags); +} + +EXPORT_SYMBOL(bcm63xx_timer_unregister); + +unsigned int bcm63xx_timer_countdown(unsigned int countdown_us) +{ + return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us; +} + +EXPORT_SYMBOL(bcm63xx_timer_countdown); + +int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us) +{ + u32 reg, countdown; + unsigned long flags; + + if (id >= BCM63XX_TIMER_COUNT) + return -EINVAL; + + countdown = bcm63xx_timer_countdown(countdown_us); + if (countdown & ~TIMER_CTL_COUNTDOWN_MASK) + return -EINVAL; + + spin_lock_irqsave(&timer_reg_lock, flags); + reg = bcm_timer_readl(TIMER_CTLx_REG(id)); + + if (monotonic) + reg &= ~TIMER_CTL_MONOTONIC_MASK; + else + reg |= TIMER_CTL_MONOTONIC_MASK; + + reg &= ~TIMER_CTL_COUNTDOWN_MASK; + reg |= countdown; + bcm_timer_writel(reg, TIMER_CTLx_REG(id)); + + spin_unlock_irqrestore(&timer_reg_lock, flags); + return 0; +} + +EXPORT_SYMBOL(bcm63xx_timer_set); + +int bcm63xx_timer_init(void) +{ + int ret, irq; + u32 reg; + + reg = bcm_timer_readl(TIMER_IRQSTAT_REG); + reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN; + reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN; + reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN; + bcm_timer_writel(reg, TIMER_IRQSTAT_REG); + + periph_clk = clk_get(NULL, "periph"); + if (IS_ERR(periph_clk)) + return -ENODEV; + + irq = bcm63xx_get_irq_number(IRQ_TIMER); + ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL); + if (ret) { + printk(KERN_ERR "bcm63xx_timer: failed to register irq\n"); + return ret; + } + + return 0; +} + +arch_initcall(bcm63xx_timer_init); diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig new file mode 100644 index 000000000000..ea00c18d1f7b --- /dev/null +++ b/arch/mips/configs/bcm63xx_defconfig @@ -0,0 +1,972 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.30-rc6 +# Sun May 31 20:17:18 2009 +# +CONFIG_MIPS=y + +# +# Machine selection +# +# CONFIG_MACH_ALCHEMY is not set +# CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set +CONFIG_BCM63XX=y +# CONFIG_MIPS_COBALT is not set +# CONFIG_MACH_DECSTATION is not set +# CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_SIM is not set +# CONFIG_NEC_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set +# CONFIG_NXP_STB220 is not set +# CONFIG_NXP_STB225 is not set +# CONFIG_PNX8550_JBS is not set +# CONFIG_PNX8550_STB810 is not set +# CONFIG_PMC_MSP is not set +# CONFIG_PMC_YOSEMITE is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set +# CONFIG_SGI_IP32 is not set +# CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set +# CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +# CONFIG_SIBYTE_SWARM is not set +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set +# CONFIG_SNI_RM is not set +# CONFIG_MACH_TX39XX is not set +# CONFIG_MACH_TX49XX is not set +# CONFIG_MIKROTIK_RB532 is not set +# CONFIG_WR_PPMC is not set +# CONFIG_CAVIUM_OCTEON_SIMULATOR is not set +# CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set + +# +# CPU support +# +CONFIG_BCM63XX_CPU_6348=y +CONFIG_BCM63XX_CPU_6358=y +CONFIG_BOARD_BCM963XX=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K_LIB=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K_LIB=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DMA_NEED_PCI_MAP_STATE=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_GPIO=y +CONFIG_CPU_BIG_ENDIAN=y +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_IRQ_CPU=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_MIPS_L1_CACHE_SHIFT=5 + +# +# CPU selection +# +# CONFIG_CPU_LOONGSON2 is not set +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +# CONFIG_CPU_MIPS64_R1 is not set +# CONFIG_CPU_MIPS64_R2 is not set +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_TX39XX is not set +# CONFIG_CPU_VR41XX is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_TX49XX is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_R5500 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_NEVADA is not set +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_RM7000 is not set +# CONFIG_CPU_RM9000 is not set +# CONFIG_CPU_SB1 is not set +# CONFIG_CPU_CAVIUM_OCTEON is not set +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_CPU_MIPS32=y +CONFIG_CPU_MIPSR1=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_HARDWARE_WATCHPOINTS=y + +# +# Kernel type +# +CONFIG_32BIT=y +# CONFIG_64BIT is not set +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_32KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_MIPS_MT_DISABLED=y +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_MT_SMTC is not set +CONFIG_CPU_HAS_LLSC=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_48 is not set +# CONFIG_HZ_100 is not set +# CONFIG_HZ_128 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_256 is not set +# CONFIG_HZ_1000 is not set +# CONFIG_HZ_1024 is not set +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +# CONFIG_KEXEC is not set +# CONFIG_SECCOMP is not set +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +# CONFIG_SWAP is not set +# CONFIG_SYSVIPC is not set +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_BASE_FULL=y +# CONFIG_FUTEX is not set +# CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_SHMEM is not set +# CONFIG_AIO is not set +# CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y +# CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_SLOW_WORK is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_FREEZER is not set + +# +# Bus options (PCI, PCMCIA, EISA, ISA, TC) +# +CONFIG_HW_HAS_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set +CONFIG_MMU=y +CONFIG_PCCARD=y +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=y +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_PCMCIA_IOCTL=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +# CONFIG_YENTA is not set +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +CONFIG_PCMCIA_BCM63XX=y +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +# CONFIG_BINFMT_MISC is not set +CONFIG_TRAD_SIGNALS=y + +# +# Power management options +# +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_PM is not set +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +# CONFIG_IP_PNP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set +# CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +# CONFIG_MTD_CHAR is not set +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +# CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +# CONFIG_BLK_DEV is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +CONFIG_BCM63XX_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_SMC91X is not set +# CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_DNET is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_ATL2 is not set +CONFIG_BCM63XX_ENET=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_NET_PCMCIA is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_DEVKMEM is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_BCM63XX=y +CONFIG_SERIAL_BCM63XX_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_CARDMAN_4000 is not set +# CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB=y +CONFIG_SSB_SPROM=y +CONFIG_SSB_PCIHOST_POSSIBLE=y +CONFIG_SSB_PCIHOST=y +# CONFIG_SSB_B43_PCI_BRIDGE is not set +CONFIG_SSB_PCMCIAHOST_POSSIBLE=y +# CONFIG_SSB_PCMCIAHOST is not set +# CONFIG_SSB_SILENT is not set +# CONFIG_SSB_DEBUG is not set +CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y +# CONFIG_SSB_DRIVER_PCICORE is not set +# CONFIG_SSB_DRIVER_MIPS is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +CONFIG_DISPLAY_SUPPORT=y + +# +# Display hardware drivers +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +# CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +# CONFIG_USB_EHCI_TT_NEWSCHED is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +# CONFIG_USB_OXU210HP_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_HCD_SSB is not set +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set + +# +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may +# + +# +# also be needed; see USB_STORAGE Help for more info +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set +# CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# Caches +# +# CONFIG_FSCACHE is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set +CONFIG_MISC_FILESYSTEMS=y +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set +# CONFIG_NETWORK_FILESYSTEMS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_CMDLINE="console=ttyS0,115200" + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set +# CONFIG_BINARY_PRINTF is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h index 0f5caa1307f1..efeddc8db8b1 100644 --- a/arch/mips/include/asm/fixmap.h +++ b/arch/mips/include/asm/fixmap.h @@ -67,11 +67,15 @@ enum fixed_addresses { * the start of the fixmap, and leave one page empty * at the top of mem.. */ +#ifdef CONFIG_BCM63XX +#define FIXADDR_TOP ((unsigned long)(long)(int)0xff000000) +#else #if defined(CONFIG_CPU_TX39XX) || defined(CONFIG_CPU_TX49XX) #define FIXADDR_TOP ((unsigned long)(long)(int)(0xff000000 - 0x20000)) #else #define FIXADDR_TOP ((unsigned long)(long)(int)0xfffe0000) #endif +#endif #define FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) #define FIXADDR_START (FIXADDR_TOP - FIXADDR_SIZE) diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h new file mode 100644 index 000000000000..fa3e7e617b09 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_board.h @@ -0,0 +1,12 @@ +#ifndef BCM63XX_BOARD_H_ +#define BCM63XX_BOARD_H_ + +const char *board_get_name(void); + +void board_prom_init(void); + +void board_setup(void); + +int board_register_devices(void); + +#endif /* ! BCM63XX_BOARD_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h new file mode 100644 index 000000000000..8fcf8df4418a --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_clk.h @@ -0,0 +1,11 @@ +#ifndef BCM63XX_CLK_H_ +#define BCM63XX_CLK_H_ + +struct clk { + void (*set)(struct clk *, int); + unsigned int rate; + unsigned int usage; + int id; +}; + +#endif /* ! BCM63XX_CLK_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h new file mode 100644 index 000000000000..b12c4aca2cc9 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cpu.h @@ -0,0 +1,538 @@ +#ifndef BCM63XX_CPU_H_ +#define BCM63XX_CPU_H_ + +#include <linux/types.h> +#include <linux/init.h> + +/* + * Macro to fetch bcm63xx cpu id and revision, should be optimized at + * compile time if only one CPU support is enabled (idea stolen from + * arm mach-types) + */ +#define BCM6338_CPU_ID 0x6338 +#define BCM6345_CPU_ID 0x6345 +#define BCM6348_CPU_ID 0x6348 +#define BCM6358_CPU_ID 0x6358 + +void __init bcm63xx_cpu_init(void); +u16 __bcm63xx_get_cpu_id(void); +u16 bcm63xx_get_cpu_rev(void); +unsigned int bcm63xx_get_cpu_freq(void); + +#ifdef CONFIG_BCM63XX_CPU_6338 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6338_CPU_ID +# endif +# define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID) +#else +# define BCMCPU_IS_6338() (0) +#endif + +#ifdef CONFIG_BCM63XX_CPU_6345 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6345_CPU_ID +# endif +# define BCMCPU_IS_6345() (bcm63xx_get_cpu_id() == BCM6345_CPU_ID) +#else +# define BCMCPU_IS_6345() (0) +#endif + +#ifdef CONFIG_BCM63XX_CPU_6348 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6348_CPU_ID +# endif +# define BCMCPU_IS_6348() (bcm63xx_get_cpu_id() == BCM6348_CPU_ID) +#else +# define BCMCPU_IS_6348() (0) +#endif + +#ifdef CONFIG_BCM63XX_CPU_6358 +# ifdef bcm63xx_get_cpu_id +# undef bcm63xx_get_cpu_id +# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() +# define BCMCPU_RUNTIME_DETECT +# else +# define bcm63xx_get_cpu_id() BCM6358_CPU_ID +# endif +# define BCMCPU_IS_6358() (bcm63xx_get_cpu_id() == BCM6358_CPU_ID) +#else +# define BCMCPU_IS_6358() (0) +#endif + +#ifndef bcm63xx_get_cpu_id +#error "No CPU support configured" +#endif + +/* + * While registers sets are (mostly) the same across 63xx CPU, base + * address of these sets do change. + */ +enum bcm63xx_regs_set { + RSET_DSL_LMEM = 0, + RSET_PERF, + RSET_TIMER, + RSET_WDT, + RSET_UART0, + RSET_GPIO, + RSET_SPI, + RSET_UDC0, + RSET_OHCI0, + RSET_OHCI_PRIV, + RSET_USBH_PRIV, + RSET_MPI, + RSET_PCMCIA, + RSET_DSL, + RSET_ENET0, + RSET_ENET1, + RSET_ENETDMA, + RSET_EHCI0, + RSET_SDRAM, + RSET_MEMC, + RSET_DDR, +}; + +#define RSET_DSL_LMEM_SIZE (64 * 1024 * 4) +#define RSET_DSL_SIZE 4096 +#define RSET_WDT_SIZE 12 +#define RSET_ENET_SIZE 2048 +#define RSET_ENETDMA_SIZE 2048 +#define RSET_UART_SIZE 24 +#define RSET_UDC_SIZE 256 +#define RSET_OHCI_SIZE 256 +#define RSET_EHCI_SIZE 256 +#define RSET_PCMCIA_SIZE 12 + +/* + * 6338 register sets base address + */ +#define BCM_6338_DSL_LMEM_BASE (0xfff00000) +#define BCM_6338_PERF_BASE (0xfffe0000) +#define BCM_6338_BB_BASE (0xfffe0100) +#define BCM_6338_TIMER_BASE (0xfffe0200) +#define BCM_6338_WDT_BASE (0xfffe021c) +#define BCM_6338_UART0_BASE (0xfffe0300) +#define BCM_6338_GPIO_BASE (0xfffe0400) +#define BCM_6338_SPI_BASE (0xfffe0c00) +#define BCM_6338_UDC0_BASE (0xdeadbeef) +#define BCM_6338_USBDMA_BASE (0xfffe2400) +#define BCM_6338_OHCI0_BASE (0xdeadbeef) +#define BCM_6338_OHCI_PRIV_BASE (0xfffe3000) +#define BCM_6338_USBH_PRIV_BASE (0xdeadbeef) +#define BCM_6338_MPI_BASE (0xfffe3160) +#define BCM_6338_PCMCIA_BASE (0xdeadbeef) +#define BCM_6338_SDRAM_REGS_BASE (0xfffe3100) +#define BCM_6338_DSL_BASE (0xfffe1000) +#define BCM_6338_SAR_BASE (0xfffe2000) +#define BCM_6338_UBUS_BASE (0xdeadbeef) +#define BCM_6338_ENET0_BASE (0xfffe2800) +#define BCM_6338_ENET1_BASE (0xdeadbeef) +#define BCM_6338_ENETDMA_BASE (0xfffe2400) +#define BCM_6338_EHCI0_BASE (0xdeadbeef) +#define BCM_6338_SDRAM_BASE (0xfffe3100) +#define BCM_6338_MEMC_BASE (0xdeadbeef) +#define BCM_6338_DDR_BASE (0xdeadbeef) + +/* + * 6345 register sets base address + */ +#define BCM_6345_DSL_LMEM_BASE (0xfff00000) +#define BCM_6345_PERF_BASE (0xfffe0000) +#define BCM_6345_BB_BASE (0xfffe0100) +#define BCM_6345_TIMER_BASE (0xfffe0200) +#define BCM_6345_WDT_BASE (0xfffe021c) +#define BCM_6345_UART0_BASE (0xfffe0300) +#define BCM_6345_GPIO_BASE (0xfffe0400) +#define BCM_6345_SPI_BASE (0xdeadbeef) +#define BCM_6345_UDC0_BASE (0xdeadbeef) +#define BCM_6345_USBDMA_BASE (0xfffe2800) +#define BCM_6345_ENET0_BASE (0xfffe1800) +#define BCM_6345_ENETDMA_BASE (0xfffe2800) +#define BCM_6345_PCMCIA_BASE (0xfffe2028) +#define BCM_6345_MPI_BASE (0xdeadbeef) +#define BCM_6345_OHCI0_BASE (0xfffe2100) +#define BCM_6345_OHCI_PRIV_BASE (0xfffe2200) +#define BCM_6345_USBH_PRIV_BASE (0xdeadbeef) +#define BCM_6345_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6345_DSL_BASE (0xdeadbeef) +#define BCM_6345_SAR_BASE (0xdeadbeef) +#define BCM_6345_UBUS_BASE (0xdeadbeef) +#define BCM_6345_ENET1_BASE (0xdeadbeef) +#define BCM_6345_EHCI0_BASE (0xdeadbeef) +#define BCM_6345_SDRAM_BASE (0xfffe2300) +#define BCM_6345_MEMC_BASE (0xdeadbeef) +#define BCM_6345_DDR_BASE (0xdeadbeef) + +/* + * 6348 register sets base address + */ +#define BCM_6348_DSL_LMEM_BASE (0xfff00000) +#define BCM_6348_PERF_BASE (0xfffe0000) +#define BCM_6348_TIMER_BASE (0xfffe0200) +#define BCM_6348_WDT_BASE (0xfffe021c) +#define BCM_6348_UART0_BASE (0xfffe0300) +#define BCM_6348_GPIO_BASE (0xfffe0400) +#define BCM_6348_SPI_BASE (0xfffe0c00) +#define BCM_6348_UDC0_BASE (0xfffe1000) +#define BCM_6348_OHCI0_BASE (0xfffe1b00) +#define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00) +#define BCM_6348_USBH_PRIV_BASE (0xdeadbeef) +#define BCM_6348_MPI_BASE (0xfffe2000) +#define BCM_6348_PCMCIA_BASE (0xfffe2054) +#define BCM_6348_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6348_DSL_BASE (0xfffe3000) +#define BCM_6348_ENET0_BASE (0xfffe6000) +#define BCM_6348_ENET1_BASE (0xfffe6800) +#define BCM_6348_ENETDMA_BASE (0xfffe7000) +#define BCM_6348_EHCI0_BASE (0xdeadbeef) +#define BCM_6348_SDRAM_BASE (0xfffe2300) +#define BCM_6348_MEMC_BASE (0xdeadbeef) +#define BCM_6348_DDR_BASE (0xdeadbeef) + +/* + * 6358 register sets base address + */ +#define BCM_6358_DSL_LMEM_BASE (0xfff00000) +#define BCM_6358_PERF_BASE (0xfffe0000) +#define BCM_6358_TIMER_BASE (0xfffe0040) +#define BCM_6358_WDT_BASE (0xfffe005c) +#define BCM_6358_UART0_BASE (0xfffe0100) +#define BCM_6358_GPIO_BASE (0xfffe0080) +#define BCM_6358_SPI_BASE (0xdeadbeef) +#define BCM_6358_UDC0_BASE (0xfffe0800) +#define BCM_6358_OHCI0_BASE (0xfffe1400) +#define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) +#define BCM_6358_USBH_PRIV_BASE (0xfffe1500) +#define BCM_6358_MPI_BASE (0xfffe1000) +#define BCM_6358_PCMCIA_BASE (0xfffe1054) +#define BCM_6358_SDRAM_REGS_BASE (0xfffe2300) +#define BCM_6358_DSL_BASE (0xfffe3000) +#define BCM_6358_ENET0_BASE (0xfffe4000) +#define BCM_6358_ENET1_BASE (0xfffe4800) +#define BCM_6358_ENETDMA_BASE (0xfffe5000) +#define BCM_6358_EHCI0_BASE (0xfffe1300) +#define BCM_6358_SDRAM_BASE (0xdeadbeef) +#define BCM_6358_MEMC_BASE (0xfffe1200) +#define BCM_6358_DDR_BASE (0xfffe12a0) + + +extern const unsigned long *bcm63xx_regs_base; + +static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) +{ +#ifdef BCMCPU_RUNTIME_DETECT + return bcm63xx_regs_base[set]; +#else +#ifdef CONFIG_BCM63XX_CPU_6338 + switch (set) { + case RSET_DSL_LMEM: + return BCM_6338_DSL_LMEM_BASE; + case RSET_PERF: + return BCM_6338_PERF_BASE; + case RSET_TIMER: + return BCM_6338_TIMER_BASE; + case RSET_WDT: + return BCM_6338_WDT_BASE; + case RSET_UART0: + return BCM_6338_UART0_BASE; + case RSET_GPIO: + return BCM_6338_GPIO_BASE; + case RSET_SPI: + return BCM_6338_SPI_BASE; + case RSET_UDC0: + return BCM_6338_UDC0_BASE; + case RSET_OHCI0: + return BCM_6338_OHCI0_BASE; + case RSET_OHCI_PRIV: + return BCM_6338_OHCI_PRIV_BASE; + case RSET_USBH_PRIV: + return BCM_6338_USBH_PRIV_BASE; + case RSET_MPI: + return BCM_6338_MPI_BASE; + case RSET_PCMCIA: + return BCM_6338_PCMCIA_BASE; + case RSET_DSL: + return BCM_6338_DSL_BASE; + case RSET_ENET0: + return BCM_6338_ENET0_BASE; + case RSET_ENET1: + return BCM_6338_ENET1_BASE; + case RSET_ENETDMA: + return BCM_6338_ENETDMA_BASE; + case RSET_EHCI0: + return BCM_6338_EHCI0_BASE; + case RSET_SDRAM: + return BCM_6338_SDRAM_BASE; + case RSET_MEMC: + return BCM_6338_MEMC_BASE; + case RSET_DDR: + return BCM_6338_DDR_BASE; + } +#endif +#ifdef CONFIG_BCM63XX_CPU_6345 + switch (set) { + case RSET_DSL_LMEM: + return BCM_6345_DSL_LMEM_BASE; + case RSET_PERF: + return BCM_6345_PERF_BASE; + case RSET_TIMER: + return BCM_6345_TIMER_BASE; + case RSET_WDT: + return BCM_6345_WDT_BASE; + case RSET_UART0: + return BCM_6345_UART0_BASE; + case RSET_GPIO: + return BCM_6345_GPIO_BASE; + case RSET_SPI: + return BCM_6345_SPI_BASE; + case RSET_UDC0: + return BCM_6345_UDC0_BASE; + case RSET_OHCI0: + return BCM_6345_OHCI0_BASE; + case RSET_OHCI_PRIV: + return BCM_6345_OHCI_PRIV_BASE; + case RSET_USBH_PRIV: + return BCM_6345_USBH_PRIV_BASE; + case RSET_MPI: + return BCM_6345_MPI_BASE; + case RSET_PCMCIA: + return BCM_6345_PCMCIA_BASE; + case RSET_DSL: + return BCM_6345_DSL_BASE; + case RSET_ENET0: + return BCM_6345_ENET0_BASE; + case RSET_ENET1: + return BCM_6345_ENET1_BASE; + case RSET_ENETDMA: + return BCM_6345_ENETDMA_BASE; + case RSET_EHCI0: + return BCM_6345_EHCI0_BASE; + case RSET_SDRAM: + return BCM_6345_SDRAM_BASE; + case RSET_MEMC: + return BCM_6345_MEMC_BASE; + case RSET_DDR: + return BCM_6345_DDR_BASE; + } +#endif +#ifdef CONFIG_BCM63XX_CPU_6348 + switch (set) { + case RSET_DSL_LMEM: + return BCM_6348_DSL_LMEM_BASE; + case RSET_PERF: + return BCM_6348_PERF_BASE; + case RSET_TIMER: + return BCM_6348_TIMER_BASE; + case RSET_WDT: + return BCM_6348_WDT_BASE; + case RSET_UART0: + return BCM_6348_UART0_BASE; + case RSET_GPIO: + return BCM_6348_GPIO_BASE; + case RSET_SPI: + return BCM_6348_SPI_BASE; + case RSET_UDC0: + return BCM_6348_UDC0_BASE; + case RSET_OHCI0: + return BCM_6348_OHCI0_BASE; + case RSET_OHCI_PRIV: + return BCM_6348_OHCI_PRIV_BASE; + case RSET_USBH_PRIV: + return BCM_6348_USBH_PRIV_BASE; + case RSET_MPI: + return BCM_6348_MPI_BASE; + case RSET_PCMCIA: + return BCM_6348_PCMCIA_BASE; + case RSET_DSL: + return BCM_6348_DSL_BASE; + case RSET_ENET0: + return BCM_6348_ENET0_BASE; + case RSET_ENET1: + return BCM_6348_ENET1_BASE; + case RSET_ENETDMA: + return BCM_6348_ENETDMA_BASE; + case RSET_EHCI0: + return BCM_6348_EHCI0_BASE; + case RSET_SDRAM: + return BCM_6348_SDRAM_BASE; + case RSET_MEMC: + return BCM_6348_MEMC_BASE; + case RSET_DDR: + return BCM_6348_DDR_BASE; + } +#endif +#ifdef CONFIG_BCM63XX_CPU_6358 + switch (set) { + case RSET_DSL_LMEM: + return BCM_6358_DSL_LMEM_BASE; + case RSET_PERF: + return BCM_6358_PERF_BASE; + case RSET_TIMER: + return BCM_6358_TIMER_BASE; + case RSET_WDT: + return BCM_6358_WDT_BASE; + case RSET_UART0: + return BCM_6358_UART0_BASE; + case RSET_GPIO: + return BCM_6358_GPIO_BASE; + case RSET_SPI: + return BCM_6358_SPI_BASE; + case RSET_UDC0: + return BCM_6358_UDC0_BASE; + case RSET_OHCI0: + return BCM_6358_OHCI0_BASE; + case RSET_OHCI_PRIV: + return BCM_6358_OHCI_PRIV_BASE; + case RSET_USBH_PRIV: + return BCM_6358_USBH_PRIV_BASE; + case RSET_MPI: + return BCM_6358_MPI_BASE; + case RSET_PCMCIA: + return BCM_6358_PCMCIA_BASE; + case RSET_ENET0: + return BCM_6358_ENET0_BASE; + case RSET_ENET1: + return BCM_6358_ENET1_BASE; + case RSET_ENETDMA: + return BCM_6358_ENETDMA_BASE; + case RSET_DSL: + return BCM_6358_DSL_BASE; + case RSET_EHCI0: + return BCM_6358_EHCI0_BASE; + case RSET_SDRAM: + return BCM_6358_SDRAM_BASE; + case RSET_MEMC: + return BCM_6358_MEMC_BASE; + case RSET_DDR: + return BCM_6358_DDR_BASE; + } +#endif +#endif + /* unreached */ + return 0; +} + +/* + * IRQ number changes across CPU too + */ +enum bcm63xx_irq { + IRQ_TIMER = 0, + IRQ_UART0, + IRQ_DSL, + IRQ_ENET0, + IRQ_ENET1, + IRQ_ENET_PHY, + IRQ_OHCI0, + IRQ_EHCI0, + IRQ_PCMCIA0, + IRQ_ENET0_RXDMA, + IRQ_ENET0_TXDMA, + IRQ_ENET1_RXDMA, + IRQ_ENET1_TXDMA, + IRQ_PCI, + IRQ_PCMCIA, +}; + +/* + * 6338 irqs + */ +#define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1) +#define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6338_DG_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6338_ATM_IRQ (IRQ_INTERNAL_BASE + 6) +#define BCM_6338_UDC0_IRQ (IRQ_INTERNAL_BASE + 7) +#define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6338_SDRAM_IRQ (IRQ_INTERNAL_BASE + 10) +#define BCM_6338_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 11) +#define BCM_6338_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6338_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13) +#define BCM_6338_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) +#define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) +#define BCM_6338_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) +#define BCM_6338_SDIO_IRQ (IRQ_INTERNAL_BASE + 17) + +/* + * 6345 irqs + */ +#define BCM_6345_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3) +#define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6345_USB_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1) +#define BCM_6345_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 2) +#define BCM_6345_EBI_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 5) +#define BCM_6345_EBI_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 6) +#define BCM_6345_RESERVED_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 9) +#define BCM_6345_RESERVED_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 10) +#define BCM_6345_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 13) +#define BCM_6345_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 14) +#define BCM_6345_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 15) +#define BCM_6345_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 16) +#define BCM_6345_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 17) +#define BCM_6345_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 18) + +/* + * 6348 irqs + */ +#define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) +#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) +#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12) +#define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20) +#define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21) +#define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22) +#define BCM_6348_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 23) +#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) +#define BCM_6348_PCI_IRQ (IRQ_INTERNAL_BASE + 24) + +/* + * 6358 irqs + */ +#define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) +#define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) +#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) +#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6) +#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) +#define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) +#define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10) +#define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) +#define BCM_6358_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) +#define BCM_6358_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 17) +#define BCM_6358_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 18) +#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29) +#define BCM_6358_PCI_IRQ (IRQ_INTERNAL_BASE + 31) +#define BCM_6358_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) + +extern const int *bcm63xx_irqs; + +static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq) +{ + return bcm63xx_irqs[irq]; +} + +/* + * return installed memory size + */ +unsigned int bcm63xx_get_memory_size(void); + +#endif /* !BCM63XX_CPU_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h new file mode 100644 index 000000000000..b1821c866e53 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_cs.h @@ -0,0 +1,10 @@ +#ifndef BCM63XX_CS_H +#define BCM63XX_CS_H + +int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size); +int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait, + unsigned int setup, unsigned int hold); +int bcm63xx_set_cs_param(unsigned int cs, u32 flags); +int bcm63xx_set_cs_status(unsigned int cs, int enable); + +#endif /* !BCM63XX_CS_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h new file mode 100644 index 000000000000..b587d45c3045 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_dsp.h @@ -0,0 +1,13 @@ +#ifndef __BCM63XX_DSP_H +#define __BCM63XX_DSP_H + +struct bcm63xx_dsp_platform_data { + unsigned gpio_rst; + unsigned gpio_int; + unsigned cs; + unsigned ext_irq; +}; + +int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd); + +#endif /* __BCM63XX_DSP_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h new file mode 100644 index 000000000000..d53f611184b9 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_enet.h @@ -0,0 +1,45 @@ +#ifndef BCM63XX_DEV_ENET_H_ +#define BCM63XX_DEV_ENET_H_ + +#include <linux/if_ether.h> +#include <linux/init.h> + +/* + * on board ethernet platform data + */ +struct bcm63xx_enet_platform_data { + char mac_addr[ETH_ALEN]; + + int has_phy; + + /* if has_phy, then set use_internal_phy */ + int use_internal_phy; + + /* or fill phy info to use an external one */ + int phy_id; + int has_phy_interrupt; + int phy_interrupt; + + /* if has_phy, use autonegociated pause parameters or force + * them */ + int pause_auto; + int pause_rx; + int pause_tx; + + /* if !has_phy, set desired forced speed/duplex */ + int force_speed_100; + int force_duplex_full; + + /* if !has_phy, set callback to perform mii device + * init/remove */ + int (*mii_config)(struct net_device *dev, int probe, + int (*mii_read)(struct net_device *dev, + int phy_id, int reg), + void (*mii_write)(struct net_device *dev, + int phy_id, int reg, int val)); +}; + +int __init bcm63xx_enet_register(int unit, + const struct bcm63xx_enet_platform_data *pd); + +#endif /* ! BCM63XX_DEV_ENET_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h new file mode 100644 index 000000000000..c549344b70ad --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_pci.h @@ -0,0 +1,6 @@ +#ifndef BCM63XX_DEV_PCI_H_ +#define BCM63XX_DEV_PCI_H_ + +extern int bcm63xx_pci_enabled; + +#endif /* BCM63XX_DEV_PCI_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h new file mode 100644 index 000000000000..76a0b7216af5 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_gpio.h @@ -0,0 +1,22 @@ +#ifndef BCM63XX_GPIO_H +#define BCM63XX_GPIO_H + +#include <linux/init.h> + +int __init bcm63xx_gpio_init(void); + +static inline unsigned long bcm63xx_gpio_count(void) +{ + switch (bcm63xx_get_cpu_id()) { + case BCM6358_CPU_ID: + return 40; + case BCM6348_CPU_ID: + default: + return 37; + } +} + +#define GPIO_DIR_OUT 0x0 +#define GPIO_DIR_IN 0x1 + +#endif /* !BCM63XX_GPIO_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h new file mode 100644 index 000000000000..91180fac6ed9 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_io.h @@ -0,0 +1,93 @@ +#ifndef BCM63XX_IO_H_ +#define BCM63XX_IO_H_ + +#include "bcm63xx_cpu.h" + +/* + * Physical memory map, RAM is mapped at 0x0. + * + * Note that size MUST be a power of two. + */ +#define BCM_PCMCIA_COMMON_BASE_PA (0x20000000) +#define BCM_PCMCIA_COMMON_SIZE (16 * 1024 * 1024) +#define BCM_PCMCIA_COMMON_END_PA (BCM_PCMCIA_COMMON_BASE_PA + \ + BCM_PCMCIA_COMMON_SIZE - 1) + +#define BCM_PCMCIA_ATTR_BASE_PA (0x21000000) +#define BCM_PCMCIA_ATTR_SIZE (16 * 1024 * 1024) +#define BCM_PCMCIA_ATTR_END_PA (BCM_PCMCIA_ATTR_BASE_PA + \ + BCM_PCMCIA_ATTR_SIZE - 1) + +#define BCM_PCMCIA_IO_BASE_PA (0x22000000) +#define BCM_PCMCIA_IO_SIZE (64 * 1024) +#define BCM_PCMCIA_IO_END_PA (BCM_PCMCIA_IO_BASE_PA + \ + BCM_PCMCIA_IO_SIZE - 1) + +#define BCM_PCI_MEM_BASE_PA (0x30000000) +#define BCM_PCI_MEM_SIZE (128 * 1024 * 1024) +#define BCM_PCI_MEM_END_PA (BCM_PCI_MEM_BASE_PA + \ + BCM_PCI_MEM_SIZE - 1) + +#define BCM_PCI_IO_BASE_PA (0x08000000) +#define BCM_PCI_IO_SIZE (64 * 1024) +#define BCM_PCI_IO_END_PA (BCM_PCI_IO_BASE_PA + \ + BCM_PCI_IO_SIZE - 1) +#define BCM_PCI_IO_HALF_PA (BCM_PCI_IO_BASE_PA + \ + (BCM_PCI_IO_SIZE / 2) - 1) + +#define BCM_CB_MEM_BASE_PA (0x38000000) +#define BCM_CB_MEM_SIZE (128 * 1024 * 1024) +#define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \ + BCM_CB_MEM_SIZE - 1) + + +/* + * Internal registers are accessed through KSEG3 + */ +#define BCM_REGS_VA(x) ((void __iomem *)(x)) + +#define bcm_readb(a) (*(volatile unsigned char *) BCM_REGS_VA(a)) +#define bcm_readw(a) (*(volatile unsigned short *) BCM_REGS_VA(a)) +#define bcm_readl(a) (*(volatile unsigned int *) BCM_REGS_VA(a)) +#define bcm_writeb(v, a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v)) +#define bcm_writew(v, a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v)) +#define bcm_writel(v, a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v)) + +/* + * IO helpers to access register set for current CPU + */ +#define bcm_rset_readb(s, o) bcm_readb(bcm63xx_regset_address(s) + (o)) +#define bcm_rset_readw(s, o) bcm_readw(bcm63xx_regset_address(s) + (o)) +#define bcm_rset_readl(s, o) bcm_readl(bcm63xx_regset_address(s) + (o)) +#define bcm_rset_writeb(s, v, o) bcm_writeb((v), \ + bcm63xx_regset_address(s) + (o)) +#define bcm_rset_writew(s, v, o) bcm_writew((v), \ + bcm63xx_regset_address(s) + (o)) +#define bcm_rset_writel(s, v, o) bcm_writel((v), \ + bcm63xx_regset_address(s) + (o)) + +/* + * helpers for frequently used register sets + */ +#define bcm_perf_readl(o) bcm_rset_readl(RSET_PERF, (o)) +#define bcm_perf_writel(v, o) bcm_rset_writel(RSET_PERF, (v), (o)) +#define bcm_timer_readl(o) bcm_rset_readl(RSET_TIMER, (o)) +#define bcm_timer_writel(v, o) bcm_rset_writel(RSET_TIMER, (v), (o)) +#define bcm_wdt_readl(o) bcm_rset_readl(RSET_WDT, (o)) +#define bcm_wdt_writel(v, o) bcm_rset_writel(RSET_WDT, (v), (o)) +#define bcm_gpio_readl(o) bcm_rset_readl(RSET_GPIO, (o)) +#define bcm_gpio_writel(v, o) bcm_rset_writel(RSET_GPIO, (v), (o)) +#define bcm_uart0_readl(o) bcm_rset_readl(RSET_UART0, (o)) +#define bcm_uart0_writel(v, o) bcm_rset_writel(RSET_UART0, (v), (o)) +#define bcm_mpi_readl(o) bcm_rset_readl(RSET_MPI, (o)) +#define bcm_mpi_writel(v, o) bcm_rset_writel(RSET_MPI, (v), (o)) +#define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o)) +#define bcm_pcmcia_writel(v, o) bcm_rset_writel(RSET_PCMCIA, (v), (o)) +#define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o)) +#define bcm_sdram_writel(v, o) bcm_rset_writel(RSET_SDRAM, (v), (o)) +#define bcm_memc_readl(o) bcm_rset_readl(RSET_MEMC, (o)) +#define bcm_memc_writel(v, o) bcm_rset_writel(RSET_MEMC, (v), (o)) +#define bcm_ddr_readl(o) bcm_rset_readl(RSET_DDR, (o)) +#define bcm_ddr_writel(v, o) bcm_rset_writel(RSET_DDR, (v), (o)) + +#endif /* ! BCM63XX_IO_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h new file mode 100644 index 000000000000..5f95577c8213 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_irq.h @@ -0,0 +1,15 @@ +#ifndef BCM63XX_IRQ_H_ +#define BCM63XX_IRQ_H_ + +#include <bcm63xx_cpu.h> + +#define IRQ_MIPS_BASE 0 +#define IRQ_INTERNAL_BASE 8 + +#define IRQ_EXT_BASE (IRQ_MIPS_BASE + 3) +#define IRQ_EXT_0 (IRQ_EXT_BASE + 0) +#define IRQ_EXT_1 (IRQ_EXT_BASE + 1) +#define IRQ_EXT_2 (IRQ_EXT_BASE + 2) +#define IRQ_EXT_3 (IRQ_EXT_BASE + 3) + +#endif /* ! BCM63XX_IRQ_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h new file mode 100644 index 000000000000..ed4ccec87dd4 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -0,0 +1,773 @@ +#ifndef BCM63XX_REGS_H_ +#define BCM63XX_REGS_H_ + +/************************************************************************* + * _REG relative to RSET_PERF + *************************************************************************/ + +/* Chip Identifier / Revision register */ +#define PERF_REV_REG 0x0 +#define REV_CHIPID_SHIFT 16 +#define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT) +#define REV_REVID_SHIFT 0 +#define REV_REVID_MASK (0xffff << REV_REVID_SHIFT) + +/* Clock Control register */ +#define PERF_CKCTL_REG 0x4 + +#define CKCTL_6338_ADSLPHY_EN (1 << 0) +#define CKCTL_6338_MPI_EN (1 << 1) +#define CKCTL_6338_DRAM_EN (1 << 2) +#define CKCTL_6338_ENET_EN (1 << 4) +#define CKCTL_6338_USBS_EN (1 << 4) +#define CKCTL_6338_SAR_EN (1 << 5) +#define CKCTL_6338_SPI_EN (1 << 9) + +#define CKCTL_6338_ALL_SAFE_EN (CKCTL_6338_ADSLPHY_EN | \ + CKCTL_6338_MPI_EN | \ + CKCTL_6338_ENET_EN | \ + CKCTL_6338_SAR_EN | \ + CKCTL_6338_SPI_EN) + +#define CKCTL_6345_CPU_EN (1 << 0) +#define CKCTL_6345_BUS_EN (1 << 1) +#define CKCTL_6345_EBI_EN (1 << 2) +#define CKCTL_6345_UART_EN (1 << 3) +#define CKCTL_6345_ADSLPHY_EN (1 << 4) +#define CKCTL_6345_ENET_EN (1 << 7) +#define CKCTL_6345_USBH_EN (1 << 8) + +#define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_ENET_EN | \ + CKCTL_6345_USBH_EN | \ + CKCTL_6345_ADSLPHY_EN) + +#define CKCTL_6348_ADSLPHY_EN (1 << 0) +#define CKCTL_6348_MPI_EN (1 << 1) +#define CKCTL_6348_SDRAM_EN (1 << 2) +#define CKCTL_6348_M2M_EN (1 << 3) +#define CKCTL_6348_ENET_EN (1 << 4) +#define CKCTL_6348_SAR_EN (1 << 5) +#define CKCTL_6348_USBS_EN (1 << 6) +#define CKCTL_6348_USBH_EN (1 << 8) +#define CKCTL_6348_SPI_EN (1 << 9) + +#define CKCTL_6348_ALL_SAFE_EN (CKCTL_6348_ADSLPHY_EN | \ + CKCTL_6348_M2M_EN | \ + CKCTL_6348_ENET_EN | \ + CKCTL_6348_SAR_EN | \ + CKCTL_6348_USBS_EN | \ + CKCTL_6348_USBH_EN | \ + CKCTL_6348_SPI_EN) + +#define CKCTL_6358_ENET_EN (1 << 4) +#define CKCTL_6358_ADSLPHY_EN (1 << 5) +#define CKCTL_6358_PCM_EN (1 << 8) +#define CKCTL_6358_SPI_EN (1 << 9) +#define CKCTL_6358_USBS_EN (1 << 10) +#define CKCTL_6358_SAR_EN (1 << 11) +#define CKCTL_6358_EMUSB_EN (1 << 17) +#define CKCTL_6358_ENET0_EN (1 << 18) +#define CKCTL_6358_ENET1_EN (1 << 19) +#define CKCTL_6358_USBSU_EN (1 << 20) +#define CKCTL_6358_EPHY_EN (1 << 21) + +#define CKCTL_6358_ALL_SAFE_EN (CKCTL_6358_ENET_EN | \ + CKCTL_6358_ADSLPHY_EN | \ + CKCTL_6358_PCM_EN | \ + CKCTL_6358_SPI_EN | \ + CKCTL_6358_USBS_EN | \ + CKCTL_6358_SAR_EN | \ + CKCTL_6358_EMUSB_EN | \ + CKCTL_6358_ENET0_EN | \ + CKCTL_6358_ENET1_EN | \ + CKCTL_6358_USBSU_EN | \ + CKCTL_6358_EPHY_EN) + +/* System PLL Control register */ +#define PERF_SYS_PLL_CTL_REG 0x8 +#define SYS_PLL_SOFT_RESET 0x1 + +/* Interrupt Mask register */ +#define PERF_IRQMASK_REG 0xc +#define PERF_IRQSTAT_REG 0x10 + +/* Interrupt Status register */ +#define PERF_IRQSTAT_REG 0x10 + +/* External Interrupt Configuration register */ +#define PERF_EXTIRQ_CFG_REG 0x14 +#define EXTIRQ_CFG_SENSE(x) (1 << (x)) +#define EXTIRQ_CFG_STAT(x) (1 << (x + 5)) +#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 10)) +#define EXTIRQ_CFG_MASK(x) (1 << (x + 15)) +#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 20)) +#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 25)) + +#define EXTIRQ_CFG_CLEAR_ALL (0xf << 10) +#define EXTIRQ_CFG_MASK_ALL (0xf << 15) + +/* Soft Reset register */ +#define PERF_SOFTRESET_REG 0x28 + +#define SOFTRESET_6338_SPI_MASK (1 << 0) +#define SOFTRESET_6338_ENET_MASK (1 << 2) +#define SOFTRESET_6338_USBH_MASK (1 << 3) +#define SOFTRESET_6338_USBS_MASK (1 << 4) +#define SOFTRESET_6338_ADSL_MASK (1 << 5) +#define SOFTRESET_6338_DMAMEM_MASK (1 << 6) +#define SOFTRESET_6338_SAR_MASK (1 << 7) +#define SOFTRESET_6338_ACLC_MASK (1 << 8) +#define SOFTRESET_6338_ADSLMIPSPLL_MASK (1 << 10) +#define SOFTRESET_6338_ALL (SOFTRESET_6338_SPI_MASK | \ + SOFTRESET_6338_ENET_MASK | \ + SOFTRESET_6338_USBH_MASK | \ + SOFTRESET_6338_USBS_MASK | \ + SOFTRESET_6338_ADSL_MASK | \ + SOFTRESET_6338_DMAMEM_MASK | \ + SOFTRESET_6338_SAR_MASK | \ + SOFTRESET_6338_ACLC_MASK | \ + SOFTRESET_6338_ADSLMIPSPLL_MASK) + +#define SOFTRESET_6348_SPI_MASK (1 << 0) +#define SOFTRESET_6348_ENET_MASK (1 << 2) +#define SOFTRESET_6348_USBH_MASK (1 << 3) +#define SOFTRESET_6348_USBS_MASK (1 << 4) +#define SOFTRESET_6348_ADSL_MASK (1 << 5) +#define SOFTRESET_6348_DMAMEM_MASK (1 << 6) +#define SOFTRESET_6348_SAR_MASK (1 << 7) +#define SOFTRESET_6348_ACLC_MASK (1 << 8) +#define SOFTRESET_6348_ADSLMIPSPLL_MASK (1 << 10) + +#define SOFTRESET_6348_ALL (SOFTRESET_6348_SPI_MASK | \ + SOFTRESET_6348_ENET_MASK | \ + SOFTRESET_6348_USBH_MASK | \ + SOFTRESET_6348_USBS_MASK | \ + SOFTRESET_6348_ADSL_MASK | \ + SOFTRESET_6348_DMAMEM_MASK | \ + SOFTRESET_6348_SAR_MASK | \ + SOFTRESET_6348_ACLC_MASK | \ + SOFTRESET_6348_ADSLMIPSPLL_MASK) + +/* MIPS PLL control register */ +#define PERF_MIPSPLLCTL_REG 0x34 +#define MIPSPLLCTL_N1_SHIFT 20 +#define MIPSPLLCTL_N1_MASK (0x7 << MIPSPLLCTL_N1_SHIFT) +#define MIPSPLLCTL_N2_SHIFT 15 +#define MIPSPLLCTL_N2_MASK (0x1f << MIPSPLLCTL_N2_SHIFT) +#define MIPSPLLCTL_M1REF_SHIFT 12 +#define MIPSPLLCTL_M1REF_MASK (0x7 << MIPSPLLCTL_M1REF_SHIFT) +#define MIPSPLLCTL_M2REF_SHIFT 9 +#define MIPSPLLCTL_M2REF_MASK (0x7 << MIPSPLLCTL_M2REF_SHIFT) +#define MIPSPLLCTL_M1CPU_SHIFT 6 +#define MIPSPLLCTL_M1CPU_MASK (0x7 << MIPSPLLCTL_M1CPU_SHIFT) +#define MIPSPLLCTL_M1BUS_SHIFT 3 +#define MIPSPLLCTL_M1BUS_MASK (0x7 << MIPSPLLCTL_M1BUS_SHIFT) +#define MIPSPLLCTL_M2BUS_SHIFT 0 +#define MIPSPLLCTL_M2BUS_MASK (0x7 << MIPSPLLCTL_M2BUS_SHIFT) + +/* ADSL PHY PLL Control register */ +#define PERF_ADSLPLLCTL_REG 0x38 +#define ADSLPLLCTL_N1_SHIFT 20 +#define ADSLPLLCTL_N1_MASK (0x7 << ADSLPLLCTL_N1_SHIFT) +#define ADSLPLLCTL_N2_SHIFT 15 +#define ADSLPLLCTL_N2_MASK (0x1f << ADSLPLLCTL_N2_SHIFT) +#define ADSLPLLCTL_M1REF_SHIFT 12 +#define ADSLPLLCTL_M1REF_MASK (0x7 << ADSLPLLCTL_M1REF_SHIFT) +#define ADSLPLLCTL_M2REF_SHIFT 9 +#define ADSLPLLCTL_M2REF_MASK (0x7 << ADSLPLLCTL_M2REF_SHIFT) +#define ADSLPLLCTL_M1CPU_SHIFT 6 +#define ADSLPLLCTL_M1CPU_MASK (0x7 << ADSLPLLCTL_M1CPU_SHIFT) +#define ADSLPLLCTL_M1BUS_SHIFT 3 +#define ADSLPLLCTL_M1BUS_MASK (0x7 << ADSLPLLCTL_M1BUS_SHIFT) +#define ADSLPLLCTL_M2BUS_SHIFT 0 +#define ADSLPLLCTL_M2BUS_MASK (0x7 << ADSLPLLCTL_M2BUS_SHIFT) + +#define ADSLPLLCTL_VAL(n1, n2, m1ref, m2ref, m1cpu, m1bus, m2bus) \ + (((n1) << ADSLPLLCTL_N1_SHIFT) | \ + ((n2) << ADSLPLLCTL_N2_SHIFT) | \ + ((m1ref) << ADSLPLLCTL_M1REF_SHIFT) | \ + ((m2ref) << ADSLPLLCTL_M2REF_SHIFT) | \ + ((m1cpu) << ADSLPLLCTL_M1CPU_SHIFT) | \ + ((m1bus) << ADSLPLLCTL_M1BUS_SHIFT) | \ + ((m2bus) << ADSLPLLCTL_M2BUS_SHIFT)) + + +/************************************************************************* + * _REG relative to RSET_TIMER + *************************************************************************/ + +#define BCM63XX_TIMER_COUNT 4 +#define TIMER_T0_ID 0 +#define TIMER_T1_ID 1 +#define TIMER_T2_ID 2 +#define TIMER_WDT_ID 3 + +/* Timer irqstat register */ +#define TIMER_IRQSTAT_REG 0 +#define TIMER_IRQSTAT_TIMER_CAUSE(x) (1 << (x)) +#define TIMER_IRQSTAT_TIMER0_CAUSE (1 << 0) +#define TIMER_IRQSTAT_TIMER1_CAUSE (1 << 1) +#define TIMER_IRQSTAT_TIMER2_CAUSE (1 << 2) +#define TIMER_IRQSTAT_WDT_CAUSE (1 << 3) +#define TIMER_IRQSTAT_TIMER_IR_EN(x) (1 << ((x) + 8)) +#define TIMER_IRQSTAT_TIMER0_IR_EN (1 << 8) +#define TIMER_IRQSTAT_TIMER1_IR_EN (1 << 9) +#define TIMER_IRQSTAT_TIMER2_IR_EN (1 << 10) + +/* Timer control register */ +#define TIMER_CTLx_REG(x) (0x4 + (x * 4)) +#define TIMER_CTL0_REG 0x4 +#define TIMER_CTL1_REG 0x8 +#define TIMER_CTL2_REG 0xC +#define TIMER_CTL_COUNTDOWN_MASK (0x3fffffff) +#define TIMER_CTL_MONOTONIC_MASK (1 << 30) +#define TIMER_CTL_ENABLE_MASK (1 << 31) + + +/************************************************************************* + * _REG relative to RSET_WDT + *************************************************************************/ + +/* Watchdog default count register */ +#define WDT_DEFVAL_REG 0x0 + +/* Watchdog control register */ +#define WDT_CTL_REG 0x4 + +/* Watchdog control register constants */ +#define WDT_START_1 (0xff00) +#define WDT_START_2 (0x00ff) +#define WDT_STOP_1 (0xee00) +#define WDT_STOP_2 (0x00ee) + +/* Watchdog reset length register */ +#define WDT_RSTLEN_REG 0x8 + + +/************************************************************************* + * _REG relative to RSET_UARTx + *************************************************************************/ + +/* UART Control Register */ +#define UART_CTL_REG 0x0 +#define UART_CTL_RXTMOUTCNT_SHIFT 0 +#define UART_CTL_RXTMOUTCNT_MASK (0x1f << UART_CTL_RXTMOUTCNT_SHIFT) +#define UART_CTL_RSTTXDN_SHIFT 5 +#define UART_CTL_RSTTXDN_MASK (1 << UART_CTL_RSTTXDN_SHIFT) +#define UART_CTL_RSTRXFIFO_SHIFT 6 +#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT) +#define UART_CTL_RSTTXFIFO_SHIFT 7 +#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT) +#define UART_CTL_STOPBITS_SHIFT 8 +#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT) +#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT) +#define UART_CTL_STOPBITS_2 (0xf << UART_CTL_STOPBITS_SHIFT) +#define UART_CTL_BITSPERSYM_SHIFT 12 +#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT) +#define UART_CTL_XMITBRK_SHIFT 14 +#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT) +#define UART_CTL_RSVD_SHIFT 15 +#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT) +#define UART_CTL_RXPAREVEN_SHIFT 16 +#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT) +#define UART_CTL_RXPAREN_SHIFT 17 +#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT) +#define UART_CTL_TXPAREVEN_SHIFT 18 +#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT) +#define UART_CTL_TXPAREN_SHIFT 18 +#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT) +#define UART_CTL_LOOPBACK_SHIFT 20 +#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT) +#define UART_CTL_RXEN_SHIFT 21 +#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT) +#define UART_CTL_TXEN_SHIFT 22 +#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT) +#define UART_CTL_BRGEN_SHIFT 23 +#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT) + +/* UART Baudword register */ +#define UART_BAUD_REG 0x4 + +/* UART Misc Control register */ +#define UART_MCTL_REG 0x8 +#define UART_MCTL_DTR_SHIFT 0 +#define UART_MCTL_DTR_MASK (1 << UART_MCTL_DTR_SHIFT) +#define UART_MCTL_RTS_SHIFT 1 +#define UART_MCTL_RTS_MASK (1 << UART_MCTL_RTS_SHIFT) +#define UART_MCTL_RXFIFOTHRESH_SHIFT 8 +#define UART_MCTL_RXFIFOTHRESH_MASK (0xf << UART_MCTL_RXFIFOTHRESH_SHIFT) +#define UART_MCTL_TXFIFOTHRESH_SHIFT 12 +#define UART_MCTL_TXFIFOTHRESH_MASK (0xf << UART_MCTL_TXFIFOTHRESH_SHIFT) +#define UART_MCTL_RXFIFOFILL_SHIFT 16 +#define UART_MCTL_RXFIFOFILL_MASK (0x1f << UART_MCTL_RXFIFOFILL_SHIFT) +#define UART_MCTL_TXFIFOFILL_SHIFT 24 +#define UART_MCTL_TXFIFOFILL_MASK (0x1f << UART_MCTL_TXFIFOFILL_SHIFT) + +/* UART External Input Configuration register */ +#define UART_EXTINP_REG 0xc +#define UART_EXTINP_RI_SHIFT 0 +#define UART_EXTINP_RI_MASK (1 << UART_EXTINP_RI_SHIFT) +#define UART_EXTINP_CTS_SHIFT 1 +#define UART_EXTINP_CTS_MASK (1 << UART_EXTINP_CTS_SHIFT) +#define UART_EXTINP_DCD_SHIFT 2 +#define UART_EXTINP_DCD_MASK (1 << UART_EXTINP_DCD_SHIFT) +#define UART_EXTINP_DSR_SHIFT 3 +#define UART_EXTINP_DSR_MASK (1 << UART_EXTINP_DSR_SHIFT) +#define UART_EXTINP_IRSTAT(x) (1 << (x + 4)) +#define UART_EXTINP_IRMASK(x) (1 << (x + 8)) +#define UART_EXTINP_IR_RI 0 +#define UART_EXTINP_IR_CTS 1 +#define UART_EXTINP_IR_DCD 2 +#define UART_EXTINP_IR_DSR 3 +#define UART_EXTINP_RI_NOSENSE_SHIFT 16 +#define UART_EXTINP_RI_NOSENSE_MASK (1 << UART_EXTINP_RI_NOSENSE_SHIFT) +#define UART_EXTINP_CTS_NOSENSE_SHIFT 17 +#define UART_EXTINP_CTS_NOSENSE_MASK (1 << UART_EXTINP_CTS_NOSENSE_SHIFT) +#define UART_EXTINP_DCD_NOSENSE_SHIFT 18 +#define UART_EXTINP_DCD_NOSENSE_MASK (1 << UART_EXTINP_DCD_NOSENSE_SHIFT) +#define UART_EXTINP_DSR_NOSENSE_SHIFT 19 +#define UART_EXTINP_DSR_NOSENSE_MASK (1 << UART_EXTINP_DSR_NOSENSE_SHIFT) + +/* UART Interrupt register */ +#define UART_IR_REG 0x10 +#define UART_IR_MASK(x) (1 << (x + 16)) +#define UART_IR_STAT(x) (1 << (x)) +#define UART_IR_EXTIP 0 +#define UART_IR_TXUNDER 1 +#define UART_IR_TXOVER 2 +#define UART_IR_TXTRESH 3 +#define UART_IR_TXRDLATCH 4 +#define UART_IR_TXEMPTY 5 +#define UART_IR_RXUNDER 6 +#define UART_IR_RXOVER 7 +#define UART_IR_RXTIMEOUT 8 +#define UART_IR_RXFULL 9 +#define UART_IR_RXTHRESH 10 +#define UART_IR_RXNOTEMPTY 11 +#define UART_IR_RXFRAMEERR 12 +#define UART_IR_RXPARERR 13 +#define UART_IR_RXBRK 14 +#define UART_IR_TXDONE 15 + +/* UART Fifo register */ +#define UART_FIFO_REG 0x14 +#define UART_FIFO_VALID_SHIFT 0 +#define UART_FIFO_VALID_MASK 0xff +#define UART_FIFO_FRAMEERR_SHIFT 8 +#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT) +#define UART_FIFO_PARERR_SHIFT 9 +#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT) +#define UART_FIFO_BRKDET_SHIFT 10 +#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT) +#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \ + UART_FIFO_PARERR_MASK | \ + UART_FIFO_BRKDET_MASK) + + +/************************************************************************* + * _REG relative to RSET_GPIO + *************************************************************************/ + +/* GPIO registers */ +#define GPIO_CTL_HI_REG 0x0 +#define GPIO_CTL_LO_REG 0x4 +#define GPIO_DATA_HI_REG 0x8 +#define GPIO_DATA_LO_REG 0xC + +/* GPIO mux registers and constants */ +#define GPIO_MODE_REG 0x18 + +#define GPIO_MODE_6348_G4_DIAG 0x00090000 +#define GPIO_MODE_6348_G4_UTOPIA 0x00080000 +#define GPIO_MODE_6348_G4_LEGACY_LED 0x00030000 +#define GPIO_MODE_6348_G4_MII_SNOOP 0x00020000 +#define GPIO_MODE_6348_G4_EXT_EPHY 0x00010000 +#define GPIO_MODE_6348_G3_DIAG 0x00009000 +#define GPIO_MODE_6348_G3_UTOPIA 0x00008000 +#define GPIO_MODE_6348_G3_EXT_MII 0x00007000 +#define GPIO_MODE_6348_G2_DIAG 0x00000900 +#define GPIO_MODE_6348_G2_PCI 0x00000500 +#define GPIO_MODE_6348_G1_DIAG 0x00000090 +#define GPIO_MODE_6348_G1_UTOPIA 0x00000080 +#define GPIO_MODE_6348_G1_SPI_UART 0x00000060 +#define GPIO_MODE_6348_G1_SPI_MASTER 0x00000060 +#define GPIO_MODE_6348_G1_MII_PCCARD 0x00000040 +#define GPIO_MODE_6348_G1_MII_SNOOP 0x00000020 +#define GPIO_MODE_6348_G1_EXT_EPHY 0x00000010 +#define GPIO_MODE_6348_G0_DIAG 0x00000009 +#define GPIO_MODE_6348_G0_EXT_MII 0x00000007 + +#define GPIO_MODE_6358_EXTRACS (1 << 5) +#define GPIO_MODE_6358_UART1 (1 << 6) +#define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) +#define GPIO_MODE_6358_SERIAL_LED (1 << 10) +#define GPIO_MODE_6358_UTOPIA (1 << 12) + + +/************************************************************************* + * _REG relative to RSET_ENET + *************************************************************************/ + +/* Receiver Configuration register */ +#define ENET_RXCFG_REG 0x0 +#define ENET_RXCFG_ALLMCAST_SHIFT 1 +#define ENET_RXCFG_ALLMCAST_MASK (1 << ENET_RXCFG_ALLMCAST_SHIFT) +#define ENET_RXCFG_PROMISC_SHIFT 3 +#define ENET_RXCFG_PROMISC_MASK (1 << ENET_RXCFG_PROMISC_SHIFT) +#define ENET_RXCFG_LOOPBACK_SHIFT 4 +#define ENET_RXCFG_LOOPBACK_MASK (1 << ENET_RXCFG_LOOPBACK_SHIFT) +#define ENET_RXCFG_ENFLOW_SHIFT 5 +#define ENET_RXCFG_ENFLOW_MASK (1 << ENET_RXCFG_ENFLOW_SHIFT) + +/* Receive Maximum Length register */ +#define ENET_RXMAXLEN_REG 0x4 +#define ENET_RXMAXLEN_SHIFT 0 +#define ENET_RXMAXLEN_MASK (0x7ff << ENET_RXMAXLEN_SHIFT) + +/* Transmit Maximum Length register */ +#define ENET_TXMAXLEN_REG 0x8 +#define ENET_TXMAXLEN_SHIFT 0 +#define ENET_TXMAXLEN_MASK (0x7ff << ENET_TXMAXLEN_SHIFT) + +/* MII Status/Control register */ +#define ENET_MIISC_REG 0x10 +#define ENET_MIISC_MDCFREQDIV_SHIFT 0 +#define ENET_MIISC_MDCFREQDIV_MASK (0x7f << ENET_MIISC_MDCFREQDIV_SHIFT) +#define ENET_MIISC_PREAMBLEEN_SHIFT 7 +#define ENET_MIISC_PREAMBLEEN_MASK (1 << ENET_MIISC_PREAMBLEEN_SHIFT) + +/* MII Data register */ +#define ENET_MIIDATA_REG 0x14 +#define ENET_MIIDATA_DATA_SHIFT 0 +#define ENET_MIIDATA_DATA_MASK (0xffff << ENET_MIIDATA_DATA_SHIFT) +#define ENET_MIIDATA_TA_SHIFT 16 +#define ENET_MIIDATA_TA_MASK (0x3 << ENET_MIIDATA_TA_SHIFT) +#define ENET_MIIDATA_REG_SHIFT 18 +#define ENET_MIIDATA_REG_MASK (0x1f << ENET_MIIDATA_REG_SHIFT) +#define ENET_MIIDATA_PHYID_SHIFT 23 +#define ENET_MIIDATA_PHYID_MASK (0x1f << ENET_MIIDATA_PHYID_SHIFT) +#define ENET_MIIDATA_OP_READ_MASK (0x6 << 28) +#define ENET_MIIDATA_OP_WRITE_MASK (0x5 << 28) + +/* Ethernet Interrupt Mask register */ +#define ENET_IRMASK_REG 0x18 + +/* Ethernet Interrupt register */ +#define ENET_IR_REG 0x1c +#define ENET_IR_MII (1 << 0) +#define ENET_IR_MIB (1 << 1) +#define ENET_IR_FLOWC (1 << 2) + +/* Ethernet Control register */ +#define ENET_CTL_REG 0x2c +#define ENET_CTL_ENABLE_SHIFT 0 +#define ENET_CTL_ENABLE_MASK (1 << ENET_CTL_ENABLE_SHIFT) +#define ENET_CTL_DISABLE_SHIFT 1 +#define ENET_CTL_DISABLE_MASK (1 << ENET_CTL_DISABLE_SHIFT) +#define ENET_CTL_SRESET_SHIFT 2 +#define ENET_CTL_SRESET_MASK (1 << ENET_CTL_SRESET_SHIFT) +#define ENET_CTL_EPHYSEL_SHIFT 3 +#define ENET_CTL_EPHYSEL_MASK (1 << ENET_CTL_EPHYSEL_SHIFT) + +/* Transmit Control register */ +#define ENET_TXCTL_REG 0x30 +#define ENET_TXCTL_FD_SHIFT 0 +#define ENET_TXCTL_FD_MASK (1 << ENET_TXCTL_FD_SHIFT) + +/* Transmit Watermask register */ +#define ENET_TXWMARK_REG 0x34 +#define ENET_TXWMARK_WM_SHIFT 0 +#define ENET_TXWMARK_WM_MASK (0x3f << ENET_TXWMARK_WM_SHIFT) + +/* MIB Control register */ +#define ENET_MIBCTL_REG 0x38 +#define ENET_MIBCTL_RDCLEAR_SHIFT 0 +#define ENET_MIBCTL_RDCLEAR_MASK (1 << ENET_MIBCTL_RDCLEAR_SHIFT) + +/* Perfect Match Data Low register */ +#define ENET_PML_REG(x) (0x58 + (x) * 8) +#define ENET_PMH_REG(x) (0x5c + (x) * 8) +#define ENET_PMH_DATAVALID_SHIFT 16 +#define ENET_PMH_DATAVALID_MASK (1 << ENET_PMH_DATAVALID_SHIFT) + +/* MIB register */ +#define ENET_MIB_REG(x) (0x200 + (x) * 4) +#define ENET_MIB_REG_COUNT 55 + + +/************************************************************************* + * _REG relative to RSET_ENETDMA + *************************************************************************/ + +/* Controller Configuration Register */ +#define ENETDMA_CFG_REG (0x0) +#define ENETDMA_CFG_EN_SHIFT 0 +#define ENETDMA_CFG_EN_MASK (1 << ENETDMA_CFG_EN_SHIFT) +#define ENETDMA_CFG_FLOWCH_MASK(x) (1 << ((x >> 1) + 1)) + +/* Flow Control Descriptor Low Threshold register */ +#define ENETDMA_FLOWCL_REG(x) (0x4 + (x) * 6) + +/* Flow Control Descriptor High Threshold register */ +#define ENETDMA_FLOWCH_REG(x) (0x8 + (x) * 6) + +/* Flow Control Descriptor Buffer Alloca Threshold register */ +#define ENETDMA_BUFALLOC_REG(x) (0xc + (x) * 6) +#define ENETDMA_BUFALLOC_FORCE_SHIFT 31 +#define ENETDMA_BUFALLOC_FORCE_MASK (1 << ENETDMA_BUFALLOC_FORCE_SHIFT) + +/* Channel Configuration register */ +#define ENETDMA_CHANCFG_REG(x) (0x100 + (x) * 0x10) +#define ENETDMA_CHANCFG_EN_SHIFT 0 +#define ENETDMA_CHANCFG_EN_MASK (1 << ENETDMA_CHANCFG_EN_SHIFT) +#define ENETDMA_CHANCFG_PKTHALT_SHIFT 1 +#define ENETDMA_CHANCFG_PKTHALT_MASK (1 << ENETDMA_CHANCFG_PKTHALT_SHIFT) + +/* Interrupt Control/Status register */ +#define ENETDMA_IR_REG(x) (0x104 + (x) * 0x10) +#define ENETDMA_IR_BUFDONE_MASK (1 << 0) +#define ENETDMA_IR_PKTDONE_MASK (1 << 1) +#define ENETDMA_IR_NOTOWNER_MASK (1 << 2) + +/* Interrupt Mask register */ +#define ENETDMA_IRMASK_REG(x) (0x108 + (x) * 0x10) + +/* Maximum Burst Length */ +#define ENETDMA_MAXBURST_REG(x) (0x10C + (x) * 0x10) + +/* Ring Start Address register */ +#define ENETDMA_RSTART_REG(x) (0x200 + (x) * 0x10) + +/* State Ram Word 2 */ +#define ENETDMA_SRAM2_REG(x) (0x204 + (x) * 0x10) + +/* State Ram Word 3 */ +#define ENETDMA_SRAM3_REG(x) (0x208 + (x) * 0x10) + +/* State Ram Word 4 */ +#define ENETDMA_SRAM4_REG(x) (0x20c + (x) * 0x10) + + +/************************************************************************* + * _REG relative to RSET_OHCI_PRIV + *************************************************************************/ + +#define OHCI_PRIV_REG 0x0 +#define OHCI_PRIV_PORT1_HOST_SHIFT 0 +#define OHCI_PRIV_PORT1_HOST_MASK (1 << OHCI_PRIV_PORT1_HOST_SHIFT) +#define OHCI_PRIV_REG_SWAP_SHIFT 3 +#define OHCI_PRIV_REG_SWAP_MASK (1 << OHCI_PRIV_REG_SWAP_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_USBH_PRIV + *************************************************************************/ + +#define USBH_PRIV_SWAP_REG 0x0 +#define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT 4 +#define USBH_PRIV_SWAP_EHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT) +#define USBH_PRIV_SWAP_EHCI_DATA_SHIFT 3 +#define USBH_PRIV_SWAP_EHCI_DATA_MASK (1 << USBH_PRIV_SWAP_EHCI_DATA_SHIFT) +#define USBH_PRIV_SWAP_OHCI_ENDN_SHIFT 1 +#define USBH_PRIV_SWAP_OHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_OHCI_ENDN_SHIFT) +#define USBH_PRIV_SWAP_OHCI_DATA_SHIFT 0 +#define USBH_PRIV_SWAP_OHCI_DATA_MASK (1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT) + +#define USBH_PRIV_TEST_REG 0x24 + + +/************************************************************************* + * _REG relative to RSET_MPI + *************************************************************************/ + +/* well known (hard wired) chip select */ +#define MPI_CS_PCMCIA_COMMON 4 +#define MPI_CS_PCMCIA_ATTR 5 +#define MPI_CS_PCMCIA_IO 6 + +/* Chip select base register */ +#define MPI_CSBASE_REG(x) (0x0 + (x) * 8) +#define MPI_CSBASE_BASE_SHIFT 13 +#define MPI_CSBASE_BASE_MASK (0x1ffff << MPI_CSBASE_BASE_SHIFT) +#define MPI_CSBASE_SIZE_SHIFT 0 +#define MPI_CSBASE_SIZE_MASK (0xf << MPI_CSBASE_SIZE_SHIFT) + +#define MPI_CSBASE_SIZE_8K 0 +#define MPI_CSBASE_SIZE_16K 1 +#define MPI_CSBASE_SIZE_32K 2 +#define MPI_CSBASE_SIZE_64K 3 +#define MPI_CSBASE_SIZE_128K 4 +#define MPI_CSBASE_SIZE_256K 5 +#define MPI_CSBASE_SIZE_512K 6 +#define MPI_CSBASE_SIZE_1M 7 +#define MPI_CSBASE_SIZE_2M 8 +#define MPI_CSBASE_SIZE_4M 9 +#define MPI_CSBASE_SIZE_8M 10 +#define MPI_CSBASE_SIZE_16M 11 +#define MPI_CSBASE_SIZE_32M 12 +#define MPI_CSBASE_SIZE_64M 13 +#define MPI_CSBASE_SIZE_128M 14 +#define MPI_CSBASE_SIZE_256M 15 + +/* Chip select control register */ +#define MPI_CSCTL_REG(x) (0x4 + (x) * 8) +#define MPI_CSCTL_ENABLE_MASK (1 << 0) +#define MPI_CSCTL_WAIT_SHIFT 1 +#define MPI_CSCTL_WAIT_MASK (0x7 << MPI_CSCTL_WAIT_SHIFT) +#define MPI_CSCTL_DATA16_MASK (1 << 4) +#define MPI_CSCTL_SYNCMODE_MASK (1 << 7) +#define MPI_CSCTL_TSIZE_MASK (1 << 8) +#define MPI_CSCTL_ENDIANSWAP_MASK (1 << 10) +#define MPI_CSCTL_SETUP_SHIFT 16 +#define MPI_CSCTL_SETUP_MASK (0xf << MPI_CSCTL_SETUP_SHIFT) +#define MPI_CSCTL_HOLD_SHIFT 20 +#define MPI_CSCTL_HOLD_MASK (0xf << MPI_CSCTL_HOLD_SHIFT) + +/* PCI registers */ +#define MPI_SP0_RANGE_REG 0x100 +#define MPI_SP0_REMAP_REG 0x104 +#define MPI_SP0_REMAP_ENABLE_MASK (1 << 0) +#define MPI_SP1_RANGE_REG 0x10C +#define MPI_SP1_REMAP_REG 0x110 +#define MPI_SP1_REMAP_ENABLE_MASK (1 << 0) + +#define MPI_L2PCFG_REG 0x11C +#define MPI_L2PCFG_CFG_TYPE_SHIFT 0 +#define MPI_L2PCFG_CFG_TYPE_MASK (0x3 << MPI_L2PCFG_CFG_TYPE_SHIFT) +#define MPI_L2PCFG_REG_SHIFT 2 +#define MPI_L2PCFG_REG_MASK (0x3f << MPI_L2PCFG_REG_SHIFT) +#define MPI_L2PCFG_FUNC_SHIFT 8 +#define MPI_L2PCFG_FUNC_MASK (0x7 << MPI_L2PCFG_FUNC_SHIFT) +#define MPI_L2PCFG_DEVNUM_SHIFT 11 +#define MPI_L2PCFG_DEVNUM_MASK (0x1f << MPI_L2PCFG_DEVNUM_SHIFT) +#define MPI_L2PCFG_CFG_USEREG_MASK (1 << 30) +#define MPI_L2PCFG_CFG_SEL_MASK (1 << 31) + +#define MPI_L2PMEMRANGE1_REG 0x120 +#define MPI_L2PMEMBASE1_REG 0x124 +#define MPI_L2PMEMREMAP1_REG 0x128 +#define MPI_L2PMEMRANGE2_REG 0x12C +#define MPI_L2PMEMBASE2_REG 0x130 +#define MPI_L2PMEMREMAP2_REG 0x134 +#define MPI_L2PIORANGE_REG 0x138 +#define MPI_L2PIOBASE_REG 0x13C +#define MPI_L2PIOREMAP_REG 0x140 +#define MPI_L2P_BASE_MASK (0xffff8000) +#define MPI_L2PREMAP_ENABLED_MASK (1 << 0) +#define MPI_L2PREMAP_IS_CARDBUS_MASK (1 << 2) + +#define MPI_PCIMODESEL_REG 0x144 +#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK (1 << 0) +#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK (1 << 1) +#define MPI_PCIMODESEL_EXT_ARB_MASK (1 << 2) +#define MPI_PCIMODESEL_PREFETCH_SHIFT 4 +#define MPI_PCIMODESEL_PREFETCH_MASK (0xf << MPI_PCIMODESEL_PREFETCH_SHIFT) + +#define MPI_LOCBUSCTL_REG 0x14C +#define MPI_LOCBUSCTL_EN_PCI_GPIO_MASK (1 << 0) +#define MPI_LOCBUSCTL_U2P_NOSWAP_MASK (1 << 1) + +#define MPI_LOCINT_REG 0x150 +#define MPI_LOCINT_MASK(x) (1 << (x + 16)) +#define MPI_LOCINT_STAT(x) (1 << (x)) +#define MPI_LOCINT_DIR_FAILED 6 +#define MPI_LOCINT_EXT_PCI_INT 7 +#define MPI_LOCINT_SERR 8 +#define MPI_LOCINT_CSERR 9 + +#define MPI_PCICFGCTL_REG 0x178 +#define MPI_PCICFGCTL_CFGADDR_SHIFT 2 +#define MPI_PCICFGCTL_CFGADDR_MASK (0x1f << MPI_PCICFGCTL_CFGADDR_SHIFT) +#define MPI_PCICFGCTL_WRITEEN_MASK (1 << 7) + +#define MPI_PCICFGDATA_REG 0x17C + +/* PCI host bridge custom register */ +#define BCMPCI_REG_TIMERS 0x40 +#define REG_TIMER_TRDY_SHIFT 0 +#define REG_TIMER_TRDY_MASK (0xff << REG_TIMER_TRDY_SHIFT) +#define REG_TIMER_RETRY_SHIFT 8 +#define REG_TIMER_RETRY_MASK (0xff << REG_TIMER_RETRY_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_PCMCIA + *************************************************************************/ + +#define PCMCIA_C1_REG 0x0 +#define PCMCIA_C1_CD1_MASK (1 << 0) +#define PCMCIA_C1_CD2_MASK (1 << 1) +#define PCMCIA_C1_VS1_MASK (1 << 2) +#define PCMCIA_C1_VS2_MASK (1 << 3) +#define PCMCIA_C1_VS1OE_MASK (1 << 6) +#define PCMCIA_C1_VS2OE_MASK (1 << 7) +#define PCMCIA_C1_CBIDSEL_SHIFT (8) +#define PCMCIA_C1_CBIDSEL_MASK (0x1f << PCMCIA_C1_CBIDSEL_SHIFT) +#define PCMCIA_C1_EN_PCMCIA_GPIO_MASK (1 << 13) +#define PCMCIA_C1_EN_PCMCIA_MASK (1 << 14) +#define PCMCIA_C1_EN_CARDBUS_MASK (1 << 15) +#define PCMCIA_C1_RESET_MASK (1 << 18) + +#define PCMCIA_C2_REG 0x8 +#define PCMCIA_C2_DATA16_MASK (1 << 0) +#define PCMCIA_C2_BYTESWAP_MASK (1 << 1) +#define PCMCIA_C2_RWCOUNT_SHIFT 2 +#define PCMCIA_C2_RWCOUNT_MASK (0x3f << PCMCIA_C2_RWCOUNT_SHIFT) +#define PCMCIA_C2_INACTIVE_SHIFT 8 +#define PCMCIA_C2_INACTIVE_MASK (0x3f << PCMCIA_C2_INACTIVE_SHIFT) +#define PCMCIA_C2_SETUP_SHIFT 16 +#define PCMCIA_C2_SETUP_MASK (0x3f << PCMCIA_C2_SETUP_SHIFT) +#define PCMCIA_C2_HOLD_SHIFT 24 +#define PCMCIA_C2_HOLD_MASK (0x3f << PCMCIA_C2_HOLD_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_SDRAM + *************************************************************************/ + +#define SDRAM_CFG_REG 0x0 +#define SDRAM_CFG_ROW_SHIFT 4 +#define SDRAM_CFG_ROW_MASK (0x3 << SDRAM_CFG_ROW_SHIFT) +#define SDRAM_CFG_COL_SHIFT 6 +#define SDRAM_CFG_COL_MASK (0x3 << SDRAM_CFG_COL_SHIFT) +#define SDRAM_CFG_32B_SHIFT 10 +#define SDRAM_CFG_32B_MASK (1 << SDRAM_CFG_32B_SHIFT) +#define SDRAM_CFG_BANK_SHIFT 13 +#define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT) + +#define SDRAM_PRIO_REG 0x2C +#define SDRAM_PRIO_MIPS_SHIFT 29 +#define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT) +#define SDRAM_PRIO_ADSL_SHIFT 30 +#define SDRAM_PRIO_ADSL_MASK (1 << SDRAM_PRIO_ADSL_SHIFT) +#define SDRAM_PRIO_EN_SHIFT 31 +#define SDRAM_PRIO_EN_MASK (1 << SDRAM_PRIO_EN_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_MEMC + *************************************************************************/ + +#define MEMC_CFG_REG 0x4 +#define MEMC_CFG_32B_SHIFT 1 +#define MEMC_CFG_32B_MASK (1 << MEMC_CFG_32B_SHIFT) +#define MEMC_CFG_COL_SHIFT 3 +#define MEMC_CFG_COL_MASK (0x3 << MEMC_CFG_COL_SHIFT) +#define MEMC_CFG_ROW_SHIFT 6 +#define MEMC_CFG_ROW_MASK (0x3 << MEMC_CFG_ROW_SHIFT) + + +/************************************************************************* + * _REG relative to RSET_DDR + *************************************************************************/ + +#define DDR_DMIPSPLLCFG_REG 0x18 +#define DMIPSPLLCFG_M1_SHIFT 0 +#define DMIPSPLLCFG_M1_MASK (0xff << DMIPSPLLCFG_M1_SHIFT) +#define DMIPSPLLCFG_N1_SHIFT 23 +#define DMIPSPLLCFG_N1_MASK (0x3f << DMIPSPLLCFG_N1_SHIFT) +#define DMIPSPLLCFG_N2_SHIFT 29 +#define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) + +#endif /* BCM63XX_REGS_H_ */ + diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h new file mode 100644 index 000000000000..c0fce833c9ed --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_timer.h @@ -0,0 +1,11 @@ +#ifndef BCM63XX_TIMER_H_ +#define BCM63XX_TIMER_H_ + +int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data); +void bcm63xx_timer_unregister(int id); +int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us); +int bcm63xx_timer_enable(int id); +int bcm63xx_timer_disable(int id); +unsigned int bcm63xx_timer_countdown(unsigned int countdown_us); + +#endif /* !BCM63XX_TIMER_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h new file mode 100644 index 000000000000..6479090a4106 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/board_bcm963xx.h @@ -0,0 +1,60 @@ +#ifndef BOARD_BCM963XX_H_ +#define BOARD_BCM963XX_H_ + +#include <linux/types.h> +#include <linux/gpio.h> +#include <linux/leds.h> +#include <bcm63xx_dev_enet.h> +#include <bcm63xx_dev_dsp.h> + +/* + * flash mapping + */ +#define BCM963XX_CFE_VERSION_OFFSET 0x570 +#define BCM963XX_NVRAM_OFFSET 0x580 + +/* + * nvram structure + */ +struct bcm963xx_nvram { + u32 version; + u8 reserved1[256]; + u8 name[16]; + u32 main_tp_number; + u32 psi_size; + u32 mac_addr_count; + u8 mac_addr_base[6]; + u8 reserved2[2]; + u32 checksum_old; + u8 reserved3[720]; + u32 checksum_high; +}; + +/* + * board definition + */ +struct board_info { + u8 name[16]; + unsigned int expected_cpu_id; + + /* enabled feature/device */ + unsigned int has_enet0:1; + unsigned int has_enet1:1; + unsigned int has_pci:1; + unsigned int has_pccard:1; + unsigned int has_ohci0:1; + unsigned int has_ehci0:1; + unsigned int has_dsp:1; + + /* ethernet config */ + struct bcm63xx_enet_platform_data enet0; + struct bcm63xx_enet_platform_data enet1; + + /* DSP config */ + struct bcm63xx_dsp_platform_data dsp; + + /* GPIO LEDs */ + struct gpio_led leds[5]; +}; + +#endif /* ! BOARD_BCM963XX_H_ */ diff --git a/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h new file mode 100644 index 000000000000..71742bac940d --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/cpu-feature-overrides.h @@ -0,0 +1,51 @@ +#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H +#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H + +#include <bcm63xx_cpu.h> + +#define cpu_has_tlb 1 +#define cpu_has_4kex 1 +#define cpu_has_4k_cache 1 +#define cpu_has_fpu 0 +#define cpu_has_32fpr 0 +#define cpu_has_counter 1 +#define cpu_has_watch 0 +#define cpu_has_divec 1 +#define cpu_has_vce 0 +#define cpu_has_cache_cdex_p 0 +#define cpu_has_cache_cdex_s 0 +#define cpu_has_prefetch 1 +#define cpu_has_mcheck 1 +#define cpu_has_ejtag 1 +#define cpu_has_llsc 1 +#define cpu_has_mips16 0 +#define cpu_has_mdmx 0 +#define cpu_has_mips3d 0 +#define cpu_has_smartmips 0 +#define cpu_has_vtag_icache 0 + +#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345)) +#define cpu_has_dc_aliases 0 +#endif + +#define cpu_has_ic_fills_f_dc 0 +#define cpu_has_pindexed_dcache 0 + +#define cpu_has_mips32r1 1 +#define cpu_has_mips32r2 0 +#define cpu_has_mips64r1 0 +#define cpu_has_mips64r2 0 + +#define cpu_has_dsp 0 +#define cpu_has_mipsmt 0 +#define cpu_has_userlocal 0 + +#define cpu_has_nofpuex 0 +#define cpu_has_64bits 0 +#define cpu_has_64bit_zero_reg 0 + +#define cpu_dcache_line_size() 16 +#define cpu_icache_line_size() 16 +#define cpu_scache_line_size() 0 + +#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/gpio.h b/arch/mips/include/asm/mach-bcm63xx/gpio.h new file mode 100644 index 000000000000..7cda8c0a3979 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/gpio.h @@ -0,0 +1,15 @@ +#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H +#define __ASM_MIPS_MACH_BCM63XX_GPIO_H + +#include <bcm63xx_gpio.h> + +#define gpio_to_irq(gpio) NULL + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value + +#define gpio_cansleep __gpio_cansleep + +#include <asm-generic/gpio.h> + +#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */ diff --git a/arch/mips/include/asm/mach-bcm63xx/war.h b/arch/mips/include/asm/mach-bcm63xx/war.h new file mode 100644 index 000000000000..8e3f3fdf3209 --- /dev/null +++ b/arch/mips/include/asm/mach-bcm63xx/war.h @@ -0,0 +1,25 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> + */ +#ifndef __ASM_MIPS_MACH_BCM63XX_WAR_H +#define __ASM_MIPS_MACH_BCM63XX_WAR_H + +#define R4600_V1_INDEX_ICACHEOP_WAR 0 +#define R4600_V1_HIT_CACHEOP_WAR 0 +#define R4600_V2_HIT_CACHEOP_WAR 0 +#define R5432_CP0_INTERRUPT_WAR 0 +#define BCM1250_M3_WAR 0 +#define SIBYTE_1956_WAR 0 +#define MIPS4K_ICACHE_REFILL_WAR 0 +#define MIPS_CACHE_SYNC_WAR 0 +#define TX49XX_ICACHE_INDEX_INV_WAR 0 +#define RM9000_CDEX_SMP_WAR 0 +#define ICACHE_REFILLS_WORKAROUND_WAR 0 +#define R10000_LLSC_WAR 0 +#define MIPS34K_MISSED_ITLB_WAR 0 + +#endif /* __ASM_MIPS_MACH_BCM63XX_WAR_H */ diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index 0d4d5ea6fac3..91bfe73a7f60 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -16,6 +16,8 @@ obj-$(CONFIG_PCI_VR41XX) += ops-vr41xx.o pci-vr41xx.o obj-$(CONFIG_NEC_MARKEINS) += ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o obj-$(CONFIG_PCI_TX4927) += ops-tx4927.o obj-$(CONFIG_BCM47XX) += pci-bcm47xx.o +obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \ + ops-bcm63xx.o # # These are still pretty much in the old state, watch, go blind. diff --git a/arch/mips/pci/fixup-bcm63xx.c b/arch/mips/pci/fixup-bcm63xx.c new file mode 100644 index 000000000000..340863009da9 --- /dev/null +++ b/arch/mips/pci/fixup-bcm63xx.c @@ -0,0 +1,21 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <bcm63xx_cpu.h> + +int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + return bcm63xx_get_irq_number(IRQ_PCI); +} + +int pcibios_plat_dev_init(struct pci_dev *dev) +{ + return 0; +} diff --git a/arch/mips/pci/ops-bcm63xx.c b/arch/mips/pci/ops-bcm63xx.c new file mode 100644 index 000000000000..822ae179bc56 --- /dev/null +++ b/arch/mips/pci/ops-bcm63xx.c @@ -0,0 +1,467 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include "pci-bcm63xx.h" + +/* + * swizzle 32bits data to return only the needed part + */ +static int postprocess_read(u32 data, int where, unsigned int size) +{ + u32 ret; + + ret = 0; + switch (size) { + case 1: + ret = (data >> ((where & 3) << 3)) & 0xff; + break; + case 2: + ret = (data >> ((where & 3) << 3)) & 0xffff; + break; + case 4: + ret = data; + break; + } + return ret; +} + +static int preprocess_write(u32 orig_data, u32 val, int where, + unsigned int size) +{ + u32 ret; + + ret = 0; + switch (size) { + case 1: + ret = (orig_data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 2: + ret = (orig_data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + break; + case 4: + ret = val; + break; + } + return ret; +} + +/* + * setup hardware for a configuration cycle with given parameters + */ +static int bcm63xx_setup_cfg_access(int type, unsigned int busn, + unsigned int devfn, int where) +{ + unsigned int slot, func, reg; + u32 val; + + slot = PCI_SLOT(devfn); + func = PCI_FUNC(devfn); + reg = where >> 2; + + /* sanity check */ + if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT)) + return 1; + + if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT)) + return 1; + + if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT)) + return 1; + + /* ok, setup config access */ + val = (reg << MPI_L2PCFG_REG_SHIFT); + val |= (func << MPI_L2PCFG_FUNC_SHIFT); + val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT); + val |= MPI_L2PCFG_CFG_USEREG_MASK; + val |= MPI_L2PCFG_CFG_SEL_MASK; + /* type 0 cycle for local bus, type 1 cycle for anything else */ + if (type != 0) { + /* FIXME: how to specify bus ??? */ + val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT); + } + bcm_mpi_writel(val, MPI_L2PCFG_REG); + + return 0; +} + +static int bcm63xx_do_cfg_read(int type, unsigned int busn, + unsigned int devfn, int where, int size, + u32 *val) +{ + u32 data; + + /* two phase cycle, first we write address, then read data at + * another location, caller already has a spinlock so no need + * to add one here */ + if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; + iob(); + data = le32_to_cpu(__raw_readl(pci_iospace_start)); + /* restore IO space normal behaviour */ + bcm_mpi_writel(0, MPI_L2PCFG_REG); + + *val = postprocess_read(data, where, size); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_do_cfg_write(int type, unsigned int busn, + unsigned int devfn, int where, int size, + u32 val) +{ + u32 data; + + /* two phase cycle, first we write address, then write data to + * another location, caller already has a spinlock so no need + * to add one here */ + if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) + return PCIBIOS_DEVICE_NOT_FOUND; + iob(); + + data = le32_to_cpu(__raw_readl(pci_iospace_start)); + data = preprocess_write(data, val, where, size); + + __raw_writel(cpu_to_le32(data), pci_iospace_start); + wmb(); + /* no way to know the access is done, we have to wait */ + udelay(500); + /* restore IO space normal behaviour */ + bcm_mpi_writel(0, MPI_L2PCFG_REG); + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + int type; + + type = bus->parent ? 1 : 0; + + if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) + return PCIBIOS_DEVICE_NOT_FOUND; + + return bcm63xx_do_cfg_read(type, bus->number, devfn, + where, size, val); +} + +static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + int type; + + type = bus->parent ? 1 : 0; + + if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) + return PCIBIOS_DEVICE_NOT_FOUND; + + return bcm63xx_do_cfg_write(type, bus->number, devfn, + where, size, val); +} + +struct pci_ops bcm63xx_pci_ops = { + .read = bcm63xx_pci_read, + .write = bcm63xx_pci_write +}; + +#ifdef CONFIG_CARDBUS +/* + * emulate configuration read access on a cardbus bridge + */ +#define FAKE_CB_BRIDGE_SLOT 0x1e + +static int fake_cb_bridge_bus_number = -1; + +static struct { + u16 pci_command; + u8 cb_latency; + u8 subordinate_busn; + u8 cardbus_busn; + u8 pci_busn; + int bus_assigned; + u16 bridge_control; + + u32 mem_base0; + u32 mem_limit0; + u32 mem_base1; + u32 mem_limit1; + + u32 io_base0; + u32 io_limit0; + u32 io_base1; + u32 io_limit1; +} fake_cb_bridge_regs; + +static int fake_cb_bridge_read(int where, int size, u32 *val) +{ + unsigned int reg; + u32 data; + + data = 0; + reg = where >> 2; + switch (reg) { + case (PCI_VENDOR_ID >> 2): + case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2): + /* create dummy vendor/device id from our cpu id */ + data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM; + break; + + case (PCI_COMMAND >> 2): + data = (PCI_STATUS_DEVSEL_SLOW << 16); + data |= fake_cb_bridge_regs.pci_command; + break; + + case (PCI_CLASS_REVISION >> 2): + data = (PCI_CLASS_BRIDGE_CARDBUS << 16); + break; + + case (PCI_CACHE_LINE_SIZE >> 2): + data = (PCI_HEADER_TYPE_CARDBUS << 16); + break; + + case (PCI_INTERRUPT_LINE >> 2): + /* bridge control */ + data = (fake_cb_bridge_regs.bridge_control << 16); + /* pin:intA line:0xff */ + data |= (0x1 << 8) | 0xff; + break; + + case (PCI_CB_PRIMARY_BUS >> 2): + data = (fake_cb_bridge_regs.cb_latency << 24); + data |= (fake_cb_bridge_regs.subordinate_busn << 16); + data |= (fake_cb_bridge_regs.cardbus_busn << 8); + data |= fake_cb_bridge_regs.pci_busn; + break; + + case (PCI_CB_MEMORY_BASE_0 >> 2): + data = fake_cb_bridge_regs.mem_base0; + break; + + case (PCI_CB_MEMORY_LIMIT_0 >> 2): + data = fake_cb_bridge_regs.mem_limit0; + break; + + case (PCI_CB_MEMORY_BASE_1 >> 2): + data = fake_cb_bridge_regs.mem_base1; + break; + + case (PCI_CB_MEMORY_LIMIT_1 >> 2): + data = fake_cb_bridge_regs.mem_limit1; + break; + + case (PCI_CB_IO_BASE_0 >> 2): + /* | 1 for 32bits io support */ + data = fake_cb_bridge_regs.io_base0 | 0x1; + break; + + case (PCI_CB_IO_LIMIT_0 >> 2): + data = fake_cb_bridge_regs.io_limit0; + break; + + case (PCI_CB_IO_BASE_1 >> 2): + /* | 1 for 32bits io support */ + data = fake_cb_bridge_regs.io_base1 | 0x1; + break; + + case (PCI_CB_IO_LIMIT_1 >> 2): + data = fake_cb_bridge_regs.io_limit1; + break; + } + + *val = postprocess_read(data, where, size); + return PCIBIOS_SUCCESSFUL; +} + +/* + * emulate configuration write access on a cardbus bridge + */ +static int fake_cb_bridge_write(int where, int size, u32 val) +{ + unsigned int reg; + u32 data, tmp; + int ret; + + ret = fake_cb_bridge_read((where & ~0x3), 4, &data); + if (ret != PCIBIOS_SUCCESSFUL) + return ret; + + data = preprocess_write(data, val, where, size); + + reg = where >> 2; + switch (reg) { + case (PCI_COMMAND >> 2): + fake_cb_bridge_regs.pci_command = (data & 0xffff); + break; + + case (PCI_CB_PRIMARY_BUS >> 2): + fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff; + fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff; + fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff; + fake_cb_bridge_regs.pci_busn = data & 0xff; + if (fake_cb_bridge_regs.cardbus_busn) + fake_cb_bridge_regs.bus_assigned = 1; + break; + + case (PCI_INTERRUPT_LINE >> 2): + tmp = (data >> 16) & 0xffff; + /* disable memory prefetch support */ + tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0; + tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1; + fake_cb_bridge_regs.bridge_control = tmp; + break; + + case (PCI_CB_MEMORY_BASE_0 >> 2): + fake_cb_bridge_regs.mem_base0 = data; + break; + + case (PCI_CB_MEMORY_LIMIT_0 >> 2): + fake_cb_bridge_regs.mem_limit0 = data; + break; + + case (PCI_CB_MEMORY_BASE_1 >> 2): + fake_cb_bridge_regs.mem_base1 = data; + break; + + case (PCI_CB_MEMORY_LIMIT_1 >> 2): + fake_cb_bridge_regs.mem_limit1 = data; + break; + + case (PCI_CB_IO_BASE_0 >> 2): + fake_cb_bridge_regs.io_base0 = data; + break; + + case (PCI_CB_IO_LIMIT_0 >> 2): + fake_cb_bridge_regs.io_limit0 = data; + break; + + case (PCI_CB_IO_BASE_1 >> 2): + fake_cb_bridge_regs.io_base1 = data; + break; + + case (PCI_CB_IO_LIMIT_1 >> 2): + fake_cb_bridge_regs.io_limit1 = data; + break; + } + + return PCIBIOS_SUCCESSFUL; +} + +static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 *val) +{ + /* snoop access to slot 0x1e on root bus, we fake a cardbus + * bridge at this location */ + if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { + fake_cb_bridge_bus_number = bus->number; + return fake_cb_bridge_read(where, size, val); + } + + /* a configuration cycle for the device behind the cardbus + * bridge is actually done as a type 0 cycle on the primary + * bus. This means that only one device can be on the cardbus + * bus */ + if (fake_cb_bridge_regs.bus_assigned && + bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(devfn) == 0) + return bcm63xx_do_cfg_read(0, 0, + PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), + where, size, val); + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) +{ + if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { + fake_cb_bridge_bus_number = bus->number; + return fake_cb_bridge_write(where, size, val); + } + + if (fake_cb_bridge_regs.bus_assigned && + bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(devfn) == 0) + return bcm63xx_do_cfg_write(0, 0, + PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), + where, size, val); + + return PCIBIOS_DEVICE_NOT_FOUND; +} + +struct pci_ops bcm63xx_cb_ops = { + .read = bcm63xx_cb_read, + .write = bcm63xx_cb_write, +}; + +/* + * only one IO window, so it cannot be shared by PCI and cardbus, use + * fixup to choose and detect unhandled configuration + */ +static void bcm63xx_fixup(struct pci_dev *dev) +{ + static int io_window = -1; + int i, found, new_io_window; + u32 val; + + /* look for any io resource */ + found = 0; + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + if (pci_resource_flags(dev, i) & IORESOURCE_IO) { + found = 1; + break; + } + } + + if (!found) + return; + + /* skip our fake bus with only cardbus bridge on it */ + if (dev->bus->number == fake_cb_bridge_bus_number) + return; + + /* find on which bus the device is */ + if (fake_cb_bridge_regs.bus_assigned && + dev->bus->number == fake_cb_bridge_regs.cardbus_busn && + PCI_SLOT(dev->devfn) == 0) + new_io_window = 1; + else + new_io_window = 0; + + if (new_io_window == io_window) + return; + + if (io_window != -1) { + printk(KERN_ERR "bcm63xx: both PCI and cardbus devices " + "need IO, which hardware cannot do\n"); + return; + } + + printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n", + (new_io_window == 0) ? "PCI" : "cardbus"); + + val = bcm_mpi_readl(MPI_L2PIOREMAP_REG); + if (io_window) + val |= MPI_L2PREMAP_IS_CARDBUS_MASK; + else + val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK; + bcm_mpi_writel(val, MPI_L2PIOREMAP_REG); + + io_window = new_io_window; +} + +DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup); +#endif diff --git a/arch/mips/pci/pci-bcm63xx.c b/arch/mips/pci/pci-bcm63xx.c new file mode 100644 index 000000000000..82e0fde1dba0 --- /dev/null +++ b/arch/mips/pci/pci-bcm63xx.c @@ -0,0 +1,224 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> + */ + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <asm/bootinfo.h> + +#include "pci-bcm63xx.h" + +/* + * Allow PCI to be disabled at runtime depending on board nvram + * configuration + */ +int bcm63xx_pci_enabled; + +static struct resource bcm_pci_mem_resource = { + .name = "bcm63xx PCI memory space", + .start = BCM_PCI_MEM_BASE_PA, + .end = BCM_PCI_MEM_END_PA, + .flags = IORESOURCE_MEM +}; + +static struct resource bcm_pci_io_resource = { + .name = "bcm63xx PCI IO space", + .start = BCM_PCI_IO_BASE_PA, +#ifdef CONFIG_CARDBUS + .end = BCM_PCI_IO_HALF_PA, +#else + .end = BCM_PCI_IO_END_PA, +#endif + .flags = IORESOURCE_IO +}; + +struct pci_controller bcm63xx_controller = { + .pci_ops = &bcm63xx_pci_ops, + .io_resource = &bcm_pci_io_resource, + .mem_resource = &bcm_pci_mem_resource, +}; + +/* + * We handle cardbus via a fake Cardbus bridge, memory and io spaces + * have to be clearly separated from PCI one since we have different + * memory decoder. + */ +#ifdef CONFIG_CARDBUS +static struct resource bcm_cb_mem_resource = { + .name = "bcm63xx Cardbus memory space", + .start = BCM_CB_MEM_BASE_PA, + .end = BCM_CB_MEM_END_PA, + .flags = IORESOURCE_MEM +}; + +static struct resource bcm_cb_io_resource = { + .name = "bcm63xx Cardbus IO space", + .start = BCM_PCI_IO_HALF_PA + 1, + .end = BCM_PCI_IO_END_PA, + .flags = IORESOURCE_IO +}; + +struct pci_controller bcm63xx_cb_controller = { + .pci_ops = &bcm63xx_cb_ops, + .io_resource = &bcm_cb_io_resource, + .mem_resource = &bcm_cb_mem_resource, +}; +#endif + +static u32 bcm63xx_int_cfg_readl(u32 reg) +{ + u32 tmp; + + tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; + tmp |= MPI_PCICFGCTL_WRITEEN_MASK; + bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); + iob(); + return bcm_mpi_readl(MPI_PCICFGDATA_REG); +} + +static void bcm63xx_int_cfg_writel(u32 val, u32 reg) +{ + u32 tmp; + + tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; + tmp |= MPI_PCICFGCTL_WRITEEN_MASK; + bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); + bcm_mpi_writel(val, MPI_PCICFGDATA_REG); +} + +void __iomem *pci_iospace_start; + +static int __init bcm63xx_pci_init(void) +{ + unsigned int mem_size; + u32 val; + + if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) + return -ENODEV; + + if (!bcm63xx_pci_enabled) + return -ENODEV; + + /* + * configuration access are done through IO space, remap 4 + * first bytes to access it from CPU. + * + * this means that no io access from CPU should happen while + * we do a configuration cycle, but there's no way we can add + * a spinlock for each io access, so this is currently kind of + * broken on SMP. + */ + pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4); + if (!pci_iospace_start) + return -ENOMEM; + + /* setup local bus to PCI access (PCI memory) */ + val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK; + bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG); + bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG); + bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG); + + /* set Cardbus IDSEL (type 0 cfg access on primary bus for + * this IDSEL will be done on Cardbus instead) */ + val = bcm_pcmcia_readl(PCMCIA_C1_REG); + val &= ~PCMCIA_C1_CBIDSEL_MASK; + val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT); + bcm_pcmcia_writel(val, PCMCIA_C1_REG); + +#ifdef CONFIG_CARDBUS + /* setup local bus to PCI access (Cardbus memory) */ + val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK; + bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG); + bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG); + val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK; + bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG); +#else + /* disable second access windows */ + bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG); +#endif + + /* setup local bus to PCI access (IO memory), we have only 1 + * IO window for both PCI and cardbus, but it cannot handle + * both at the same time, assume standard PCI for now, if + * cardbus card has IO zone, PCI fixup will change window to + * cardbus */ + val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK; + bcm_mpi_writel(val, MPI_L2PIOBASE_REG); + bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG); + bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG); + + /* enable PCI related GPIO pins */ + bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG); + + /* setup PCI to local bus access, used by PCI device to target + * local RAM while bus mastering */ + bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3); + if (BCMCPU_IS_6358()) + val = MPI_SP0_REMAP_ENABLE_MASK; + else + val = 0; + bcm_mpi_writel(val, MPI_SP0_REMAP_REG); + + bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4); + bcm_mpi_writel(0, MPI_SP1_REMAP_REG); + + mem_size = bcm63xx_get_memory_size(); + + /* 6348 before rev b0 exposes only 16 MB of RAM memory through + * PCI, throw a warning if we have more memory */ + if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) { + if (mem_size > (16 * 1024 * 1024)) + printk(KERN_WARNING "bcm63xx: this CPU " + "revision cannot handle more than 16MB " + "of RAM for PCI bus mastering\n"); + } else { + /* setup sp0 range to local RAM size */ + bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG); + bcm_mpi_writel(0, MPI_SP1_RANGE_REG); + } + + /* change host bridge retry counter to infinite number of + * retry, needed for some broadcom wifi cards with Silicon + * Backplane bus where access to srom seems very slow */ + val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS); + val &= ~REG_TIMER_RETRY_MASK; + bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS); + + /* enable memory decoder and bus mastering */ + val = bcm63xx_int_cfg_readl(PCI_COMMAND); + val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + bcm63xx_int_cfg_writel(val, PCI_COMMAND); + + /* enable read prefetching & disable byte swapping for bus + * mastering transfers */ + val = bcm_mpi_readl(MPI_PCIMODESEL_REG); + val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK; + val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK; + val &= ~MPI_PCIMODESEL_PREFETCH_MASK; + val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT); + bcm_mpi_writel(val, MPI_PCIMODESEL_REG); + + /* enable pci interrupt */ + val = bcm_mpi_readl(MPI_LOCINT_REG); + val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT); + bcm_mpi_writel(val, MPI_LOCINT_REG); + + register_pci_controller(&bcm63xx_controller); + +#ifdef CONFIG_CARDBUS + register_pci_controller(&bcm63xx_cb_controller); +#endif + + /* mark memory space used for IO mapping as reserved */ + request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE, + "bcm63xx PCI IO space"); + return 0; +} + +arch_initcall(bcm63xx_pci_init); diff --git a/arch/mips/pci/pci-bcm63xx.h b/arch/mips/pci/pci-bcm63xx.h new file mode 100644 index 000000000000..a6e594ef3d6a --- /dev/null +++ b/arch/mips/pci/pci-bcm63xx.h @@ -0,0 +1,27 @@ +#ifndef PCI_BCM63XX_H_ +#define PCI_BCM63XX_H_ + +#include <bcm63xx_cpu.h> +#include <bcm63xx_io.h> +#include <bcm63xx_regs.h> +#include <bcm63xx_dev_pci.h> + +/* + * Cardbus shares the PCI bus, but has no IDSEL, so a special id is + * reserved for it. If you have a standard PCI device at this id, you + * need to change the following definition. + */ +#define CARDBUS_PCI_IDSEL 0x8 + +/* + * defined in ops-bcm63xx.c + */ +extern struct pci_ops bcm63xx_pci_ops; +extern struct pci_ops bcm63xx_cb_ops; + +/* + * defined in pci-bcm63xx.c + */ +extern void __iomem *pci_iospace_start; + +#endif /* ! PCI_BCM63XX_H_ */ |