diff options
43 files changed, 4041 insertions, 2811 deletions
diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index ca699a3017f3..7ee2f70ca42e 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -221,8 +221,6 @@ int snd_soc_dapm_new_controls(struct snd_soc_codec *codec, int num); /* dapm path setup */ -int __deprecated snd_soc_dapm_connect_input(struct snd_soc_codec *codec, - const char *sink_name, const char *control_name, const char *src_name); int snd_soc_dapm_new_widgets(struct snd_soc_codec *codec); void snd_soc_dapm_free(struct snd_soc_device *socdev); int snd_soc_dapm_add_routes(struct snd_soc_codec *codec, diff --git a/include/sound/soc.h b/include/sound/soc.h index 5e0189876afd..da0040b69c2d 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -426,6 +426,7 @@ struct snd_soc_codec { short reg_cache_step; /* dapm */ + u32 pop_time; struct list_head dapm_widgets; struct list_head dapm_paths; enum snd_soc_bias_level bias_level; @@ -517,6 +518,9 @@ struct snd_soc_device { struct delayed_work delayed_work; struct work_struct deferred_resume_work; void *codec_data; +#ifdef CONFIG_DEBUG_FS + struct dentry *debugfs_root; +#endif }; /* runtime channel data */ diff --git a/sound/soc/Kconfig b/sound/soc/Kconfig index 4dfda6674bec..615ebf0b76e7 100644 --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -23,8 +23,7 @@ config SND_SOC_AC97_BUS bool # All the supported Soc's -source "sound/soc/at32/Kconfig" -source "sound/soc/at91/Kconfig" +source "sound/soc/atmel/Kconfig" source "sound/soc/au1x/Kconfig" source "sound/soc/pxa/Kconfig" source "sound/soc/s3c24xx/Kconfig" diff --git a/sound/soc/Makefile b/sound/soc/Makefile index d849349f2c66..4d475c3ceb91 100644 --- a/sound/soc/Makefile +++ b/sound/soc/Makefile @@ -1,5 +1,5 @@ snd-soc-core-objs := soc-core.o soc-dapm.o obj-$(CONFIG_SND_SOC) += snd-soc-core.o -obj-$(CONFIG_SND_SOC) += codecs/ at32/ at91/ pxa/ s3c24xx/ sh/ fsl/ davinci/ +obj-$(CONFIG_SND_SOC) += codecs/ atmel/ pxa/ s3c24xx/ sh/ fsl/ davinci/ obj-$(CONFIG_SND_SOC) += omap/ au1x/ blackfin/ diff --git a/sound/soc/at32/Kconfig b/sound/soc/at32/Kconfig deleted file mode 100644 index b0765e86c085..000000000000 --- a/sound/soc/at32/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -config SND_AT32_SOC - tristate "SoC Audio for the Atmel AT32 System-on-a-Chip" - depends on AVR32 && SND_SOC - help - Say Y or M if you want to add support for codecs attached to - the AT32 SSC interface. You will also need to - to select the audio interfaces to support below. - - -config SND_AT32_SOC_SSC - tristate - - - -config SND_AT32_SOC_PLAYPAQ - tristate "SoC Audio support for PlayPaq with WM8510" - depends on SND_AT32_SOC && BOARD_PLAYPAQ - select SND_AT32_SOC_SSC - select SND_SOC_WM8510 - help - Say Y or M here if you want to add support for SoC audio - on the LRS PlayPaq. - - - -config SND_AT32_SOC_PLAYPAQ_SLAVE - bool "Run CODEC on PlayPaq in slave mode" - depends on SND_AT32_SOC_PLAYPAQ - default n - help - Say Y if you want to run with the AT32 SSC generating the BCLK - and FRAME signals on the PlayPaq. Unless you want to play - with the AT32 as the SSC master, you probably want to say N here, - as this will give you better sound quality. diff --git a/sound/soc/at32/Makefile b/sound/soc/at32/Makefile deleted file mode 100644 index c03e55ececeb..000000000000 --- a/sound/soc/at32/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# AT32 Platform Support -snd-soc-at32-objs := at32-pcm.o -snd-soc-at32-ssc-objs := at32-ssc.o - -obj-$(CONFIG_SND_AT32_SOC) += snd-soc-at32.o -obj-$(CONFIG_SND_AT32_SOC_SSC) += snd-soc-at32-ssc.o - -# AT32 Machine Support -snd-soc-playpaq-objs := playpaq_wm8510.o - -obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/at32/at32-pcm.h b/sound/soc/at32/at32-pcm.h deleted file mode 100644 index 2a52430417da..000000000000 --- a/sound/soc/at32/at32-pcm.h +++ /dev/null @@ -1,79 +0,0 @@ -/* sound/soc/at32/at32-pcm.h - * ASoC PCM interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum@acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOUND_SOC_AT32_AT32_PCM_H -#define __SOUND_SOC_AT32_AT32_PCM_H __FILE__ - -#include <linux/atmel-ssc.h> - - -/* - * Registers and status bits that are required by the PCM driver - * TODO: Is ptcr really used? - */ -struct at32_pdc_regs { - u32 xpr; /* PDC RX/TX pointer */ - u32 xcr; /* PDC RX/TX counter */ - u32 xnpr; /* PDC next RX/TX pointer */ - u32 xncr; /* PDC next RX/TX counter */ - u32 ptcr; /* PDC transfer control */ -}; - - - -/* - * SSC mask info - */ -struct at32_ssc_mask { - u32 ssc_enable; /* SSC RX/TX enable */ - u32 ssc_disable; /* SSC RX/TX disable */ - u32 ssc_endx; /* SSC ENDTX or ENDRX */ - u32 ssc_endbuf; /* SSC TXBUFF or RXBUFF */ - u32 pdc_enable; /* PDC RX/TX enable */ - u32 pdc_disable; /* PDC RX/TX disable */ -}; - - - -/* - * This structure, shared between the PCM driver and the interface, - * contains all information required by the PCM driver to perform the - * PDC DMA operation. All fields except dma_intr_handler() are initialized - * by the interface. The dms_intr_handler() pointer is set by the PCM - * driver and called by the interface SSC interrupt handler if it is - * non-NULL. - */ -struct at32_pcm_dma_params { - char *name; /* stream identifier */ - int pdc_xfer_size; /* PDC counter increment in bytes */ - struct ssc_device *ssc; /* SSC device for stream */ - struct at32_pdc_regs *pdc; /* PDC register info */ - struct at32_ssc_mask *mask; /* SSC mask info */ - struct snd_pcm_substream *substream; - void (*dma_intr_handler) (u32, struct snd_pcm_substream *); -}; - - - -/* - * The AT32 ASoC platform driver - */ -extern struct snd_soc_platform at32_soc_platform; - - - -/* - * SSC register access (since ssc_writel() / ssc_readl() require literal name) - */ -#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) -#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) - -#endif /* __SOUND_SOC_AT32_AT32_PCM_H */ diff --git a/sound/soc/at32/at32-ssc.c b/sound/soc/at32/at32-ssc.c deleted file mode 100644 index 4ef6492c902e..000000000000 --- a/sound/soc/at32/at32-ssc.c +++ /dev/null @@ -1,849 +0,0 @@ -/* sound/soc/at32/at32-ssc.c - * ASoC platform driver for AT32 using SSC as DAI - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum@acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Note that this is basically a port of the sound/soc/at91-ssc.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. - */ - -/* #define DEBUG */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/atmel_pdc.h> -#include <linux/atmel-ssc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include "at32-pcm.h" -#include "at32-ssc.h" - - - -/*-------------------------------------------------------------------------*\ - * Constants -\*-------------------------------------------------------------------------*/ -#define NUM_SSC_DEVICES 3 - -/* - * SSC direction masks - */ -#define SSC_DIR_MASK_UNUSED 0 -#define SSC_DIR_MASK_PLAYBACK 1 -#define SSC_DIR_MASK_CAPTURE 2 - -/* - * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These - * are expected to be used with SSC_BF - */ -/* START bit field values */ -#define SSC_START_CONTINUOUS 0 -#define SSC_START_TX_RX 1 -#define SSC_START_LOW_RF 2 -#define SSC_START_HIGH_RF 3 -#define SSC_START_FALLING_RF 4 -#define SSC_START_RISING_RF 5 -#define SSC_START_LEVEL_RF 6 -#define SSC_START_EDGE_RF 7 -#define SSS_START_COMPARE_0 8 - -/* CKI bit field values */ -#define SSC_CKI_FALLING 0 -#define SSC_CKI_RISING 1 - -/* CKO bit field values */ -#define SSC_CKO_NONE 0 -#define SSC_CKO_CONTINUOUS 1 -#define SSC_CKO_TRANSFER 2 - -/* CKS bit field values */ -#define SSC_CKS_DIV 0 -#define SSC_CKS_CLOCK 1 -#define SSC_CKS_PIN 2 - -/* FSEDGE bit field values */ -#define SSC_FSEDGE_POSITIVE 0 -#define SSC_FSEDGE_NEGATIVE 1 - -/* FSOS bit field values */ -#define SSC_FSOS_NONE 0 -#define SSC_FSOS_NEGATIVE 1 -#define SSC_FSOS_POSITIVE 2 -#define SSC_FSOS_LOW 3 -#define SSC_FSOS_HIGH 4 -#define SSC_FSOS_TOGGLE 5 - -#define START_DELAY 1 - - - -/*-------------------------------------------------------------------------*\ - * Module data -\*-------------------------------------------------------------------------*/ -/* - * SSC PDC registered required by the PCM DMA engine - */ -static struct at32_pdc_regs pdc_tx_reg = { - .xpr = SSC_PDC_TPR, - .xcr = SSC_PDC_TCR, - .xnpr = SSC_PDC_TNPR, - .xncr = SSC_PDC_TNCR, -}; - - - -static struct at32_pdc_regs pdc_rx_reg = { - .xpr = SSC_PDC_RPR, - .xcr = SSC_PDC_RCR, - .xnpr = SSC_PDC_RNPR, - .xncr = SSC_PDC_RNCR, -}; - - - -/* - * SSC and PDC status bits for transmit and receive - */ -static struct at32_ssc_mask ssc_tx_mask = { - .ssc_enable = SSC_BIT(CR_TXEN), - .ssc_disable = SSC_BIT(CR_TXDIS), - .ssc_endx = SSC_BIT(SR_ENDTX), - .ssc_endbuf = SSC_BIT(SR_TXBUFE), - .pdc_enable = SSC_BIT(PDC_PTCR_TXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_TXTDIS), -}; - - - -static struct at32_ssc_mask ssc_rx_mask = { - .ssc_enable = SSC_BIT(CR_RXEN), - .ssc_disable = SSC_BIT(CR_RXDIS), - .ssc_endx = SSC_BIT(SR_ENDRX), - .ssc_endbuf = SSC_BIT(SR_RXBUFF), - .pdc_enable = SSC_BIT(PDC_PTCR_RXTEN), - .pdc_disable = SSC_BIT(PDC_PTCR_RXTDIS), -}; - - - -/* - * DMA parameters for each SSC - */ -static struct at32_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - { - { - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, - { - { - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }, - }, -}; - - - -static struct at32_ssc_info ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = SSC_DIR_MASK_UNUSED, - .initialized = 0, - }, -}; - - - - -/*-------------------------------------------------------------------------*\ - * ISR -\*-------------------------------------------------------------------------*/ -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA interrupt - * handler in the PCM driver. - */ -static irqreturn_t at32_ssc_interrupt(int irq, void *dev_id) -{ - struct at32_ssc_info *ssc_p = dev_id; - struct at32_pcm_dma_params *dma_params; - u32 ssc_sr; - u32 ssc_substream_mask; - int i; - - ssc_sr = (ssc_readl(ssc_p->ssc->regs, SR) & - ssc_readl(ssc_p->ssc->regs, IMR)); - - /* - * Loop through substreams attached to this SSC. If a DMA-related - * interrupt occured on that substream, call the DMA interrupt - * handler function, if one has been registered in the dma_param - * structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if ((dma_params != NULL) && - (dma_params->dma_intr_handler != NULL)) { - ssc_substream_mask = (dma_params->mask->ssc_endx | - dma_params->mask->ssc_endbuf); - if (ssc_sr & ssc_substream_mask) { - dma_params->dma_intr_handler(ssc_sr, - dma_params-> - substream); - } - } - } - - - return IRQ_HANDLED; -} - -/*-------------------------------------------------------------------------*\ - * DAI functions -\*-------------------------------------------------------------------------*/ -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at32_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - dir_mask = ((substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ? - SSC_DIR_MASK_PLAYBACK : SSC_DIR_MASK_CAPTURE); - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - - - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at32_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - int dir_mask; - - dma_params = ssc_p->dma_params[substream->stream]; - - if (dma_params != NULL) { - ssc_writel(dma_params->ssc->regs, CR, - dma_params->mask->ssc_disable); - pr_debug("%s disabled SSC_SR=0x%08x\n", - (substream->stream ? "receiver" : "transmit"), - ssc_readl(ssc_p->ssc->regs, SR)); - - dma_params->ssc = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[substream->stream] = NULL; - } - - - dir_mask = 1 << substream->stream; - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock */ - pr_debug("at32-ssc: Stopping user %d clock\n", - ssc_p->ssc->user); - clk_disable(ssc_p->ssc->clk); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc->irq, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - /* clear the SSC dividers */ - ssc_p->cmr_div = 0; - ssc_p->tcmr_period = 0; - ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - - - -/* - * Set the SSC system clock rate - */ -static int at32_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* TODO: What the heck do I do here? */ - return 0; -} - - - -/* - * Record DAI format for use by hw_params() - */ -static int at32_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - - - -/* - * Record SSC clock dividers for use in hw_params() - */ -static int at32_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at32_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT32_SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT32_SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT32_SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - - - -/* - * Configure the SSC - */ -static int at32_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at32_ssc_info *ssc_p = &ssc_info[id]; - struct at32_pcm_dma_params *dma_params; - int channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - - /* - * Currently, there is only one set of dma_params for each direction. - * If more are added, this code will have to be changed to select - * the proper set - */ - dma_params = &ssc_dma_params[id][substream->stream]; - dma_params->ssc = ssc_p->ssc; - dma_params->substream = substream; - - ssc_p->dma_params[substream->stream] = dma_params; - - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the PCM driver's hw_params() - * function. It should not be used for other purposes as it - * is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - - /* - * Determine sample size in bits and the PDC increment - */ - switch (params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - - case SNDRV_PCM_FORMAT_S16: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - - case SNDRV_PCM_FORMAT_S24: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - - case SNDRV_PCM_FORMAT_S32: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - - default: - pr_warning("at32-ssc: Unsupported PCM format %d", - params_format(params)); - return -EINVAL; - } - pr_debug("at32-ssc: bits = %d, pdc_xfer_size = %d, channels = %d\n", - bits, dma_params->pdc_xfer_size, channels); - - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S) - if (bits > 16) { - pr_warning("at32-ssc: " - "sample size %d is too large for I2S\n", - bits); - return -EINVAL; - } - - - /* - * Compute the SSC register settings - */ - switch (ssc_p->daifmt & (SND_SOC_DAIFMT_FORMAT_MASK | - SND_SOC_DAIFMT_MASTER_MASK)) { - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRS clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, SSC_START_FALLING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(RFMR_FSLEN, bits - 1) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, SSC_START_FALLING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) | - SSC_BF(TFMR_FSLEN, bits - 1) | - SSC_BF(TFMR_DATNB, channels - 1) | SSC_BIT(TFMR_MSBF) | - SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clock. - * - * The SSC transmit clock is obtained from the BCLK signal - * on the TK line, and the SSC receive clock is generated from - * the transmit clock. - * - * For single channel data, one sample is transferred on the - * falling edge of the LRC clock. For two channel data, one - * sample is transferred on both edges of the LRC clock. - */ - pr_debug("at32-ssc: SSC mode is I2S BCLK / FRAME slave\n"); - start_event = ((channels == 1) ? - SSC_START_FALLING_RF : SSC_START_EDGE_RF); - - rcmr = (SSC_BF(RCMR_STTDLY, START_DELAY) | - SSC_BF(RCMR_START, start_event) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_CLOCK)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_STTDLY, START_DELAY) | - SSC_BF(TCMR_START, start_event) | - SSC_BF(TCMR_CKI, SSC_CKI_FALLING) | - SSC_BF(TCMR_CKO, SSC_CKO_NONE) | - SSC_BF(TCMR_CKS, SSC_CKS_PIN)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line - */ - pr_debug("at32-ssc: SSC mode is DSP A BCLK / FRAME master\n"); - rcmr = (SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) | - SSC_BF(RCMR_STTDLY, 1) | - SSC_BF(RCMR_START, SSC_START_RISING_RF) | - SSC_BF(RCMR_CKI, SSC_CKI_RISING) | - SSC_BF(RCMR_CKO, SSC_CKO_NONE) | - SSC_BF(RCMR_CKS, SSC_CKS_DIV)); - - rfmr = (SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(RFMR_DATNB, channels - 1) | - SSC_BIT(RFMR_MSBF) | SSC_BF(RFMR_DATLEN, bits - 1)); - - tcmr = (SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) | - SSC_BF(TCMR_STTDLY, 1) | - SSC_BF(TCMR_START, SSC_START_RISING_RF) | - SSC_BF(TCMR_CKI, SSC_CKI_RISING) | - SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) | - SSC_BF(TCMR_CKS, SSC_CKS_DIV)); - - tfmr = (SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) | - SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) | - SSC_BF(TFMR_DATNB, channels - 1) | - SSC_BIT(TFMR_MSBF) | SSC_BF(TFMR_DATLEN, bits - 1)); - break; - - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - pr_warning("at32-ssc: unsupported DAI format 0x%x\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - pr_debug("at32-ssc: RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", - rcmr, rfmr, tcmr, tfmr); - - - if (!ssc_p->initialized) { - /* enable peripheral clock */ - pr_debug("at32-ssc: Starting clock\n"); - clk_enable(ssc_p->ssc->clk); - - /* Reset the SSC and its PDC registers */ - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); - - ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); - - ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); - ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); - - ret = request_irq(ssc_p->ssc->irq, at32_ssc_interrupt, 0, - ssc_p->name, ssc_p); - if (ret < 0) { - pr_warning("at32-ssc: request irq failed (%d)\n", ret); - pr_debug("at32-ssc: Stopping clock\n"); - clk_disable(ssc_p->ssc->clk); - return ret; - } - - ssc_p->initialized = 1; - } - - /* Set SSC clock mode register */ - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); - - /* set transmit clock mode and format */ - ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); - ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); - - pr_debug("at32-ssc: SSC initialized\n"); - return 0; -} - - - -static int at32_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at32_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at32_pcm_dma_params *dma_params; - - dma_params = ssc_p->dma_params[substream->stream]; - - ssc_writel(dma_params->ssc->regs, CR, dma_params->mask->ssc_enable); - - return 0; -} - - - -#ifdef CONFIG_PM -static int at32_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive */ - ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); - ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); - - /* Save the current interrupt mask, then disable unmasked interrupts */ - ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); - ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); - ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); - ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); - ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); - ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); - - return 0; -} - - - -static int at32_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at32_ssc_info *ssc_p; - u32 cr; - - if (!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* restore SSC register settings */ - ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); - ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); - ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); - ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); - ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); - - /* re-enable interrupts */ - ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); - - /* Re-enable recieve and transmit as appropriate */ - cr = 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; - cr |= - (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; - ssc_writel(ssc_p->ssc->regs, CR, cr); - - return 0; -} -#else /* CONFIG_PM */ -# define at32_ssc_suspend NULL -# define at32_ssc_resume NULL -#endif /* CONFIG_PM */ - - -#define AT32_SSC_RATES \ - (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 | SNDRV_PCM_RATE_16000 | \ - SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) - - -#define AT32_SSC_FORMATS \ - (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16 | \ - SNDRV_PCM_FMTBIT_S24 | SNDRV_PCM_FMTBIT_S32) - - -struct snd_soc_dai at32_ssc_dai[NUM_SSC_DEVICES] = { - { - .name = "at32-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[0], - }, - { - .name = "at32-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[1], - }, - { - .name = "at32-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at32_ssc_suspend, - .resume = at32_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT32_SSC_RATES, - .formats = AT32_SSC_FORMATS, - }, - .ops = { - .startup = at32_ssc_startup, - .shutdown = at32_ssc_shutdown, - .prepare = at32_ssc_prepare, - .hw_params = at32_ssc_hw_params, - }, - .dai_ops = { - .set_sysclk = at32_ssc_set_dai_sysclk, - .set_fmt = at32_ssc_set_dai_fmt, - .set_clkdiv = at32_ssc_set_dai_clkdiv, - }, - .private_data = &ssc_info[2], - }, -}; -EXPORT_SYMBOL_GPL(at32_ssc_dai); - - -MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>"); -MODULE_DESCRIPTION("AT32 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at32/at32-ssc.h b/sound/soc/at32/at32-ssc.h deleted file mode 100644 index 3c052dbbe460..000000000000 --- a/sound/soc/at32/at32-ssc.h +++ /dev/null @@ -1,59 +0,0 @@ -/* sound/soc/at32/at32-ssc.h - * ASoC SSC interface for Atmel AT32 SoC - * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum@acm.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __SOUND_SOC_AT32_AT32_SSC_H -#define __SOUND_SOC_AT32_AT32_SSC_H __FILE__ - -#include <linux/types.h> -#include <linux/atmel-ssc.h> - -#include "at32-pcm.h" - - - -struct at32_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - - - -struct at32_ssc_info { - char *name; - struct ssc_device *ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* true if SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at32_pcm_dma_params *dma_params[2]; - struct at32_ssc_state ssc_state; -}; - - -/* SSC divider ids */ -#define AT32_SSC_CMR_DIV 0 /* MCK divider for BCLK */ -#define AT32_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ -#define AT32_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ - - -extern struct snd_soc_dai at32_ssc_dai[]; - - - -#endif /* __SOUND_SOC_AT32_AT32_SSC_H */ diff --git a/sound/soc/at91/Kconfig b/sound/soc/at91/Kconfig deleted file mode 100644 index 85a883299c2e..000000000000 --- a/sound/soc/at91/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config SND_AT91_SOC - tristate "SoC Audio for the Atmel AT91 System-on-Chip" - depends on ARCH_AT91 - help - Say Y or M if you want to add support for codecs attached to - the AT91 SSC interface. You will also need - to select the audio interfaces to support below. - -config SND_AT91_SOC_SSC - tristate diff --git a/sound/soc/at91/Makefile b/sound/soc/at91/Makefile deleted file mode 100644 index b817f11df286..000000000000 --- a/sound/soc/at91/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# AT91 Platform Support -snd-soc-at91-objs := at91-pcm.o -snd-soc-at91-ssc-objs := at91-ssc.o - -obj-$(CONFIG_SND_AT91_SOC) += snd-soc-at91.o -obj-$(CONFIG_SND_AT91_SOC_SSC) += snd-soc-at91-ssc.o diff --git a/sound/soc/at91/at91-pcm.c b/sound/soc/at91/at91-pcm.c deleted file mode 100644 index 7ab48bd25e4c..000000000000 --- a/sound/soc/at91/at91-pcm.c +++ /dev/null @@ -1,434 +0,0 @@ -/* - * at91-pcm.c -- ALSA PCM interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino@endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 3, 2006 - * - * Based on pxa2xx-pcm.c by: - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: (C) 2004 MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/dma-mapping.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" - -#if 0 -#define DBG(x...) printk(KERN_INFO "at91-pcm: " x) -#else -#define DBG(x...) -#endif - -static const struct snd_pcm_hardware at91_pcm_hardware = { - .info = SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_PAUSE, - .formats = SNDRV_PCM_FMTBIT_S16_LE, - .period_bytes_min = 32, - .period_bytes_max = 8192, - .periods_min = 2, - .periods_max = 1024, - .buffer_bytes_max = 32 * 1024, -}; - -struct at91_runtime_data { - struct at91_pcm_dma_params *params; - dma_addr_t dma_buffer; /* physical address of dma buffer */ - dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ - size_t period_size; - dma_addr_t period_ptr; /* physical address of next period */ - u32 pdc_xpr_save; /* PDC register save */ - u32 pdc_xcr_save; - u32 pdc_xnpr_save; - u32 pdc_xncr_save; -}; - -static void at91_pcm_dma_irq(u32 ssc_sr, - struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - static int count = 0; - - count++; - - if (ssc_sr & params->mask->ssc_endbuf) { - - printk(KERN_WARNING - "at91-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", - substream->stream == SNDRV_PCM_STREAM_PLAYBACK - ? "underrun" : "overrun", - params->name, ssc_sr, count); - - /* re-start the PDC */ - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) { - prtd->period_ptr = prtd->dma_buffer; - } - - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - } - - if (ssc_sr & params->mask->ssc_endx) { - - /* Load the PDC next pointer and counter registers */ - prtd->period_ptr += prtd->period_size; - if (prtd->period_ptr >= prtd->dma_buffer_end) { - prtd->period_ptr = prtd->dma_buffer; - } - at91_ssc_write(params->ssc_base + params->pdc->xnpr, - prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - } - - snd_pcm_period_elapsed(substream); -} - -static int at91_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd = runtime->private_data; - struct snd_soc_pcm_runtime *rtd = substream->private_data; - - /* this may get called several times by oss emulation - * with different params */ - - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); - runtime->dma_bytes = params_buffer_bytes(params); - - prtd->params = rtd->dai->cpu_dai->dma_data; - prtd->params->dma_intr_handler = at91_pcm_dma_irq; - - prtd->dma_buffer = runtime->dma_addr; - prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; - prtd->period_size = params_period_bytes(params); - - DBG("hw_params: DMA for %s initialized (dma_bytes=%d, period_size=%d)\n", - prtd->params->name, runtime->dma_bytes, prtd->period_size); - return 0; -} - -static int at91_pcm_hw_free(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - - if (params != NULL) { - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - prtd->params->dma_intr_handler = NULL; - } - - return 0; -} - -static int at91_pcm_prepare(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - - at91_ssc_write(params->ssc_base + AT91_SSC_IDR, - params->mask->ssc_endx | params->mask->ssc_endbuf); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - return 0; -} - -static int at91_pcm_trigger(struct snd_pcm_substream *substream, - int cmd) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - int ret = 0; - - switch (cmd) { - case SNDRV_PCM_TRIGGER_START: - prtd->period_ptr = prtd->dma_buffer; - - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xcr, - prtd->period_size / params->pdc_xfer_size); - - prtd->period_ptr += prtd->period_size; - at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->period_ptr); - at91_ssc_write(params->ssc_base + params->pdc->xncr, - prtd->period_size / params->pdc_xfer_size); - - DBG("trigger: period_ptr=%lx, xpr=%lx, xcr=%ld, xnpr=%lx, xncr=%ld\n", - (unsigned long) prtd->period_ptr, - at91_ssc_read(params->ssc_base + params->pdc->xpr), - at91_ssc_read(params->ssc_base + params->pdc->xcr), - at91_ssc_read(params->ssc_base + params->pdc->xnpr), - at91_ssc_read(params->ssc_base + params->pdc->xncr)); - - at91_ssc_write(params->ssc_base + AT91_SSC_IER, - params->mask->ssc_endx | params->mask->ssc_endbuf); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, - params->mask->pdc_enable); - - DBG("sr=%lx imr=%lx\n", - at91_ssc_read(params->ssc_base + AT91_SSC_SR), - at91_ssc_read(params->ssc_base + AT91_SSC_IMR)); - break; - - case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - break; - - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - break; - - default: - ret = -EINVAL; - } - - return ret; -} - -static snd_pcm_uframes_t at91_pcm_pointer( - struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd = runtime->private_data; - struct at91_pcm_dma_params *params = prtd->params; - dma_addr_t ptr; - snd_pcm_uframes_t x; - - ptr = (dma_addr_t) at91_ssc_read(params->ssc_base + params->pdc->xpr); - x = bytes_to_frames(runtime, ptr - prtd->dma_buffer); - - if (x == runtime->buffer_size) - x = 0; - return x; -} - -static int at91_pcm_open(struct snd_pcm_substream *substream) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - struct at91_runtime_data *prtd; - int ret = 0; - - snd_soc_set_runtime_hwparams(substream, &at91_pcm_hardware); - - /* ensure that buffer size is a multiple of period size */ - ret = snd_pcm_hw_constraint_integer(runtime, SNDRV_PCM_HW_PARAM_PERIODS); - if (ret < 0) - goto out; - - prtd = kzalloc(sizeof(struct at91_runtime_data), GFP_KERNEL); - if (prtd == NULL) { - ret = -ENOMEM; - goto out; - } - runtime->private_data = prtd; - - out: - return ret; -} - -static int at91_pcm_close(struct snd_pcm_substream *substream) -{ - struct at91_runtime_data *prtd = substream->runtime->private_data; - - kfree(prtd); - return 0; -} - -static int at91_pcm_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) -{ - struct snd_pcm_runtime *runtime = substream->runtime; - - return dma_mmap_writecombine(substream->pcm->card->dev, vma, - runtime->dma_area, - runtime->dma_addr, - runtime->dma_bytes); -} - -struct snd_pcm_ops at91_pcm_ops = { - .open = at91_pcm_open, - .close = at91_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = at91_pcm_hw_params, - .hw_free = at91_pcm_hw_free, - .prepare = at91_pcm_prepare, - .trigger = at91_pcm_trigger, - .pointer = at91_pcm_pointer, - .mmap = at91_pcm_mmap, -}; - -static int at91_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, - int stream) -{ - struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *buf = &substream->dma_buffer; - size_t size = at91_pcm_hardware.buffer_bytes_max; - - buf->dev.type = SNDRV_DMA_TYPE_DEV; - buf->dev.dev = pcm->card->dev; - buf->private_data = NULL; - buf->area = dma_alloc_writecombine(pcm->card->dev, size, - &buf->addr, GFP_KERNEL); - - DBG("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", - (void *) buf->area, - (void *) buf->addr, - size); - - if (!buf->area) - return -ENOMEM; - - buf->bytes = size; - return 0; -} - -static u64 at91_pcm_dmamask = 0xffffffff; - -static int at91_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, struct snd_pcm *pcm) -{ - int ret = 0; - - if (!card->dev->dma_mask) - card->dev->dma_mask = &at91_pcm_dmamask; - if (!card->dev->coherent_dma_mask) - card->dev->coherent_dma_mask = 0xffffffff; - - if (dai->playback.channels_min) { - ret = at91_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_PLAYBACK); - if (ret) - goto out; - } - - if (dai->capture.channels_min) { - ret = at91_pcm_preallocate_dma_buffer(pcm, - SNDRV_PCM_STREAM_CAPTURE); - if (ret) - goto out; - } - out: - return ret; -} - -static void at91_pcm_free_dma_buffers(struct snd_pcm *pcm) -{ - struct snd_pcm_substream *substream; - struct snd_dma_buffer *buf; - int stream; - - for (stream = 0; stream < 2; stream++) { - substream = pcm->streams[stream].substream; - if (!substream) - continue; - - buf = &substream->dma_buffer; - if (!buf->area) - continue; - - dma_free_writecombine(pcm->card->dev, buf->bytes, - buf->area, buf->addr); - buf->area = NULL; - } -} - -#ifdef CONFIG_PM -static int at91_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at91_runtime_data *prtd; - struct at91_pcm_dma_params *params; - - if (!runtime) - return 0; - - prtd = runtime->private_data; - params = prtd->params; - - /* disable the PDC and save the PDC registers */ - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_disable); - - prtd->pdc_xpr_save = at91_ssc_read(params->ssc_base + params->pdc->xpr); - prtd->pdc_xcr_save = at91_ssc_read(params->ssc_base + params->pdc->xcr); - prtd->pdc_xnpr_save = at91_ssc_read(params->ssc_base + params->pdc->xnpr); - prtd->pdc_xncr_save = at91_ssc_read(params->ssc_base + params->pdc->xncr); - - return 0; -} - -static int at91_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) -{ - struct snd_pcm_runtime *runtime = dai->runtime; - struct at91_runtime_data *prtd; - struct at91_pcm_dma_params *params; - - if (!runtime) - return 0; - - prtd = runtime->private_data; - params = prtd->params; - - /* restore the PDC registers and enable the PDC */ - at91_ssc_write(params->ssc_base + params->pdc->xpr, prtd->pdc_xpr_save); - at91_ssc_write(params->ssc_base + params->pdc->xcr, prtd->pdc_xcr_save); - at91_ssc_write(params->ssc_base + params->pdc->xnpr, prtd->pdc_xnpr_save); - at91_ssc_write(params->ssc_base + params->pdc->xncr, prtd->pdc_xncr_save); - - at91_ssc_write(params->ssc_base + ATMEL_PDC_PTCR, params->mask->pdc_enable); - return 0; -} -#else -#define at91_pcm_suspend NULL -#define at91_pcm_resume NULL -#endif - -struct snd_soc_platform at91_soc_platform = { - .name = "at91-audio", - .pcm_ops = &at91_pcm_ops, - .pcm_new = at91_pcm_new, - .pcm_free = at91_pcm_free_dma_buffers, - .suspend = at91_pcm_suspend, - .resume = at91_pcm_resume, -}; - -EXPORT_SYMBOL_GPL(at91_soc_platform); - -MODULE_AUTHOR("Frank Mandarino <fmandarino@endrelia.com>"); -MODULE_DESCRIPTION("Atmel AT91 PCM module"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/at91-pcm.h b/sound/soc/at91/at91-pcm.h deleted file mode 100644 index e5aada2cb102..000000000000 --- a/sound/soc/at91/at91-pcm.h +++ /dev/null @@ -1,72 +0,0 @@ -/* - * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino@endrelia.com> - * Endrelia Technologies Inc. - * Created: Mar 3, 2006 - * - * Based on pxa2xx-pcm.h by: - * - * Author: Nicolas Pitre - * Created: Nov 30, 2004 - * Copyright: MontaVista Software, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _AT91_PCM_H -#define _AT91_PCM_H - -#include <mach/hardware.h> - -struct at91_ssc_periph { - void __iomem *base; - u32 pid; -}; - -/* - * Registers and status bits that are required by the PCM driver. - */ -struct at91_pdc_regs { - unsigned int xpr; /* PDC recv/trans pointer */ - unsigned int xcr; /* PDC recv/trans counter */ - unsigned int xnpr; /* PDC next recv/trans pointer */ - unsigned int xncr; /* PDC next recv/trans counter */ - unsigned int ptcr; /* PDC transfer control */ -}; - -struct at91_ssc_mask { - u32 ssc_enable; /* SSC recv/trans enable */ - u32 ssc_disable; /* SSC recv/trans disable */ - u32 ssc_endx; /* SSC ENDTX or ENDRX */ - u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ - u32 pdc_enable; /* PDC recv/trans enable */ - u32 pdc_disable; /* PDC recv/trans disable */ -}; - -/* - * This structure, shared between the PCM driver and the interface, - * contains all information required by the PCM driver to perform the - * PDC DMA operation. All fields except dma_intr_handler() are initialized - * by the interface. The dms_intr_handler() pointer is set by the PCM - * driver and called by the interface SSC interrupt handler if it is - * non-NULL. - */ -struct at91_pcm_dma_params { - char *name; /* stream identifier */ - int pdc_xfer_size; /* PDC counter increment in bytes */ - void __iomem *ssc_base; /* SSC base address */ - struct at91_pdc_regs *pdc; /* PDC receive or transmit registers */ - struct at91_ssc_mask *mask;/* SSC & PDC status bits */ - struct snd_pcm_substream *substream; - void (*dma_intr_handler)(u32, struct snd_pcm_substream *); -}; - -extern struct snd_soc_platform at91_soc_platform; - -#define at91_ssc_read(a) ((unsigned long) __raw_readl(a)) -#define at91_ssc_write(a,v) __raw_writel((v),(a)) - -#endif /* _AT91_PCM_H */ diff --git a/sound/soc/at91/at91-ssc.c b/sound/soc/at91/at91-ssc.c deleted file mode 100644 index 1b61cc461261..000000000000 --- a/sound/soc/at91/at91-ssc.c +++ /dev/null @@ -1,791 +0,0 @@ -/* - * at91-ssc.c -- ALSA SoC AT91 SSC Audio Layer Platform driver - * - * Author: Frank Mandarino <fmandarino@endrelia.com> - * Endrelia Technologies Inc. - * - * Based on pxa2xx Platform drivers by - * Liam Girdwood <lrg@slimlogic.co.uk> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/clk.h> -#include <linux/atmel_pdc.h> - -#include <sound/core.h> -#include <sound/pcm.h> -#include <sound/pcm_params.h> -#include <sound/initval.h> -#include <sound/soc.h> - -#include <mach/hardware.h> -#include <mach/at91_pmc.h> -#include <mach/at91_ssc.h> - -#include "at91-pcm.h" -#include "at91-ssc.h" - -#if 0 -#define DBG(x...) printk(KERN_DEBUG "at91-ssc:" x) -#else -#define DBG(x...) -#endif - -#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) -#define NUM_SSC_DEVICES 1 -#else -#define NUM_SSC_DEVICES 3 -#endif - - -/* - * SSC PDC registers required by the PCM DMA engine. - */ -static struct at91_pdc_regs pdc_tx_reg = { - .xpr = ATMEL_PDC_TPR, - .xcr = ATMEL_PDC_TCR, - .xnpr = ATMEL_PDC_TNPR, - .xncr = ATMEL_PDC_TNCR, -}; - -static struct at91_pdc_regs pdc_rx_reg = { - .xpr = ATMEL_PDC_RPR, - .xcr = ATMEL_PDC_RCR, - .xnpr = ATMEL_PDC_RNPR, - .xncr = ATMEL_PDC_RNCR, -}; - -/* - * SSC & PDC status bits for transmit and receive. - */ -static struct at91_ssc_mask ssc_tx_mask = { - .ssc_enable = AT91_SSC_TXEN, - .ssc_disable = AT91_SSC_TXDIS, - .ssc_endx = AT91_SSC_ENDTX, - .ssc_endbuf = AT91_SSC_TXBUFE, - .pdc_enable = ATMEL_PDC_TXTEN, - .pdc_disable = ATMEL_PDC_TXTDIS, -}; - -static struct at91_ssc_mask ssc_rx_mask = { - .ssc_enable = AT91_SSC_RXEN, - .ssc_disable = AT91_SSC_RXDIS, - .ssc_endx = AT91_SSC_ENDRX, - .ssc_endbuf = AT91_SSC_RXBUFF, - .pdc_enable = ATMEL_PDC_RXTEN, - .pdc_disable = ATMEL_PDC_RXTDIS, -}; - - -/* - * DMA parameters. - */ -static struct at91_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { - {{ - .name = "SSC0 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC0 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#if NUM_SSC_DEVICES == 3 - {{ - .name = "SSC1 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC1 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, - {{ - .name = "SSC2 PCM out", - .pdc = &pdc_tx_reg, - .mask = &ssc_tx_mask, - }, - { - .name = "SSC2 PCM in", - .pdc = &pdc_rx_reg, - .mask = &ssc_rx_mask, - }}, -#endif -}; - -struct at91_ssc_state { - u32 ssc_cmr; - u32 ssc_rcmr; - u32 ssc_rfmr; - u32 ssc_tcmr; - u32 ssc_tfmr; - u32 ssc_sr; - u32 ssc_imr; -}; - -static struct at91_ssc_info { - char *name; - struct at91_ssc_periph ssc; - spinlock_t lock; /* lock for dir_mask */ - unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ - unsigned short initialized; /* 1=SSC has been initialized */ - unsigned short daifmt; - unsigned short cmr_div; - unsigned short tcmr_period; - unsigned short rcmr_period; - struct at91_pcm_dma_params *dma_params[2]; - struct at91_ssc_state ssc_state; - -} ssc_info[NUM_SSC_DEVICES] = { - { - .name = "ssc0", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), - .dir_mask = 0, - .initialized = 0, - }, -#if NUM_SSC_DEVICES == 3 - { - .name = "ssc1", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), - .dir_mask = 0, - .initialized = 0, - }, - { - .name = "ssc2", - .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), - .dir_mask = 0, - .initialized = 0, - }, -#endif -}; - -static unsigned int at91_ssc_sysclk; - -/* - * SSC interrupt handler. Passes PDC interrupts to the DMA - * interrupt handler in the PCM driver. - */ -static irqreturn_t at91_ssc_interrupt(int irq, void *dev_id) -{ - struct at91_ssc_info *ssc_p = dev_id; - struct at91_pcm_dma_params *dma_params; - u32 ssc_sr; - int i; - - ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR) - & at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - - /* - * Loop through the substreams attached to this SSC. If - * a DMA-related interrupt occurred on that substream, call - * the DMA interrupt handler function, if one has been - * registered in the dma_params structure by the PCM driver. - */ - for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { - dma_params = ssc_p->dma_params[i]; - - if (dma_params != NULL && dma_params->dma_intr_handler != NULL && - (ssc_sr & - (dma_params->mask->ssc_endx | dma_params->mask->ssc_endbuf))) - - dma_params->dma_intr_handler(ssc_sr, dma_params->substream); - } - - return IRQ_HANDLED; -} - -/* - * Startup. Only that one substream allowed in each direction. - */ -static int at91_ssc_startup(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - int dir_mask; - - DBG("ssc_startup: SSC_SR=0x%08lx\n", - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - dir_mask = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0x1 : 0x2; - - spin_lock_irq(&ssc_p->lock); - if (ssc_p->dir_mask & dir_mask) { - spin_unlock_irq(&ssc_p->lock); - return -EBUSY; - } - ssc_p->dir_mask |= dir_mask; - spin_unlock_irq(&ssc_p->lock); - - return 0; -} - -/* - * Shutdown. Clear DMA parameters and shutdown the SSC if there - * are no other substreams open. - */ -static void at91_ssc_shutdown(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir, dir_mask; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - if (dma_params != NULL) { - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_disable); - DBG("%s disabled SSC_SR=0x%08lx\n", (dir ? "receive" : "transmit"), - at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR)); - - dma_params->ssc_base = NULL; - dma_params->substream = NULL; - ssc_p->dma_params[dir] = NULL; - } - - dir_mask = 1 << dir; - - spin_lock_irq(&ssc_p->lock); - ssc_p->dir_mask &= ~dir_mask; - if (!ssc_p->dir_mask) { - /* Shutdown the SSC clock. */ - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - - if (ssc_p->initialized) { - free_irq(ssc_p->ssc.pid, ssc_p); - ssc_p->initialized = 0; - } - - /* Reset the SSC */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - /* Clear the SSC dividers */ - ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; - } - spin_unlock_irq(&ssc_p->lock); -} - -/* - * Record the SSC system clock rate. - */ -static int at91_ssc_set_dai_sysclk(struct snd_soc_dai *cpu_dai, - int clk_id, unsigned int freq, int dir) -{ - /* - * The only clock supplied to the SSC is the AT91 master clock, - * which is only used if the SSC is generating BCLK and/or - * LRC clocks. - */ - switch (clk_id) { - case AT91_SYSCLK_MCK: - at91_ssc_sysclk = freq; - break; - default: - return -EINVAL; - } - - return 0; -} - -/* - * Record the DAI format for use in hw_params(). - */ -static int at91_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, - unsigned int fmt) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - ssc_p->daifmt = fmt; - return 0; -} - -/* - * Record SSC clock dividers for use in hw_params(). - */ -static int at91_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, - int div_id, int div) -{ - struct at91_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; - - switch (div_id) { - case AT91SSC_CMR_DIV: - /* - * The same master clock divider is used for both - * transmit and receive, so if a value has already - * been set, it must match this value. - */ - if (ssc_p->cmr_div == 0) - ssc_p->cmr_div = div; - else - if (div != ssc_p->cmr_div) - return -EBUSY; - break; - - case AT91SSC_TCMR_PERIOD: - ssc_p->tcmr_period = div; - break; - - case AT91SSC_RCMR_PERIOD: - ssc_p->rcmr_period = div; - break; - - default: - return -EINVAL; - } - - return 0; -} - -/* - * Configure the SSC. - */ -static int at91_ssc_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - int id = rtd->dai->cpu_dai->id; - struct at91_ssc_info *ssc_p = &ssc_info[id]; - struct at91_pcm_dma_params *dma_params; - int dir, channels, bits; - u32 tfmr, rfmr, tcmr, rcmr; - int start_event; - int ret; - - /* - * Currently, there is only one set of dma params for - * each direction. If more are added, this code will - * have to be changed to select the proper set. - */ - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - - dma_params = &ssc_dma_params[id][dir]; - dma_params->ssc_base = ssc_p->ssc.base; - dma_params->substream = substream; - - ssc_p->dma_params[dir] = dma_params; - - /* - * The cpu_dai->dma_data field is only used to communicate the - * appropriate DMA parameters to the pcm driver hw_params() - * function. It should not be used for other purposes - * as it is common to all substreams. - */ - rtd->dai->cpu_dai->dma_data = dma_params; - - channels = params_channels(params); - - /* - * Determine sample size in bits and the PDC increment. - */ - switch(params_format(params)) { - case SNDRV_PCM_FORMAT_S8: - bits = 8; - dma_params->pdc_xfer_size = 1; - break; - case SNDRV_PCM_FORMAT_S16_LE: - bits = 16; - dma_params->pdc_xfer_size = 2; - break; - case SNDRV_PCM_FORMAT_S24_LE: - bits = 24; - dma_params->pdc_xfer_size = 4; - break; - case SNDRV_PCM_FORMAT_S32_LE: - bits = 32; - dma_params->pdc_xfer_size = 4; - break; - default: - printk(KERN_WARNING "at91-ssc: unsupported PCM format\n"); - return -EINVAL; - } - - /* - * The SSC only supports up to 16-bit samples in I2S format, due - * to the size of the Frame Mode Register FSLEN field. - */ - if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S - && bits > 16) { - printk(KERN_WARNING - "at91-ssc: sample size %d is too large for I2S\n", bits); - return -EINVAL; - } - - /* - * Compute SSC register settings. - */ - switch (ssc_p->daifmt - & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: - /* - * I2S format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_FALLING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NEGATIVE ) & AT91_SSC_FSOS) - | (((bits - 1) << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: - /* - * I2S format, CODEC supplies BCLK and LRC clocks. - * - * The SSC transmit clock is obtained from the BCLK signal on - * on the TK line, and the SSC receive clock is generated from the - * transmit clock. - * - * For single channel data, one sample is transferred on the falling - * edge of the LRC clock. For two channel data, one sample is - * transferred on both edges of the LRC clock. - */ - start_event = channels == 1 - ? AT91_SSC_START_FALLING_RF - : AT91_SSC_START_EDGE_RF; - - rcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_CLOCK ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( 0 << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( start_event ) & AT91_SSC_START) - | (( AT91_SSC_CKI_FALLING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_PIN ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_NONE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (( 0 << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: - /* - * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. - * - * The SSC transmit and receive clocks are generated from the - * MCK divider, and the BCLK signal is output on the SSC TK line. - */ - rcmr = (( ssc_p->rcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_NONE ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - rfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_LOOP) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - tcmr = (( ssc_p->tcmr_period << 24) & AT91_SSC_PERIOD) - | (( 1 << 16) & AT91_SSC_STTDLY) - | (( AT91_SSC_START_RISING_RF ) & AT91_SSC_START) - | (( AT91_SSC_CK_RISING ) & AT91_SSC_CKI) - | (( AT91_SSC_CKO_CONTINUOUS ) & AT91_SSC_CKO) - | (( AT91_SSC_CKS_DIV ) & AT91_SSC_CKS); - - tfmr = (( AT91_SSC_FSEDGE_POSITIVE ) & AT91_SSC_FSEDGE) - | (( 0 << 23) & AT91_SSC_FSDEN) - | (( AT91_SSC_FSOS_POSITIVE ) & AT91_SSC_FSOS) - | (( 0 << 16) & AT91_SSC_FSLEN) - | (((channels - 1) << 8) & AT91_SSC_DATNB) - | (( 1 << 7) & AT91_SSC_MSBF) - | (( 0 << 5) & AT91_SSC_DATDEF) - | (((bits - 1) << 0) & AT91_SSC_DATALEN); - - - - break; - - case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: - default: - printk(KERN_WARNING "at91-ssc: unsupported DAI format 0x%x.\n", - ssc_p->daifmt); - return -EINVAL; - break; - } - DBG("RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", rcmr, rfmr, tcmr, tfmr); - - if (!ssc_p->initialized) { - - /* Enable PMC peripheral clock for this SSC */ - DBG("Starting pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCER, 1<<ssc_p->ssc.pid); - - /* Reset the SSC and its PDC registers */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, AT91_SSC_SWRST); - - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_RNCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TCR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNPR, 0); - at91_ssc_write(ssc_p->ssc.base + ATMEL_PDC_TNCR, 0); - - if ((ret = request_irq(ssc_p->ssc.pid, at91_ssc_interrupt, - 0, ssc_p->name, ssc_p)) < 0) { - printk(KERN_WARNING "at91-ssc: request_irq failure\n"); - - DBG("Stopping pid %d clock\n", ssc_p->ssc.pid); - at91_sys_write(AT91_PMC_PCDR, 1<<ssc_p->ssc.pid); - return ret; - } - - ssc_p->initialized = 1; - } - - /* set SSC clock mode register */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->cmr_div); - - /* set receive clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, rfmr); - - /* set transmit clock mode and format */ - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, tfmr); - - DBG("hw_params: SSC initialized\n"); - return 0; -} - - -static int at91_ssc_prepare(struct snd_pcm_substream *substream) -{ - struct snd_soc_pcm_runtime *rtd = substream->private_data; - struct at91_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; - struct at91_pcm_dma_params *dma_params; - int dir; - - dir = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? 0 : 1; - dma_params = ssc_p->dma_params[dir]; - - at91_ssc_write(dma_params->ssc_base + AT91_SSC_CR, - dma_params->mask->ssc_enable); - - DBG("%s enabled SSC_SR=0x%08lx\n", dir ? "receive" : "transmit", - at91_ssc_read(dma_params->ssc_base + AT91_SSC_SR)); - return 0; -} - - -#ifdef CONFIG_PM -static int at91_ssc_suspend(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - /* Save the status register before disabling transmit and receive. */ - ssc_p->ssc_state.ssc_sr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_SR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - AT91_SSC_TXDIS | AT91_SSC_RXDIS); - - /* Save the current interrupt mask, then disable unmasked interrupts. */ - ssc_p->ssc_state.ssc_imr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_IMR); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IDR, ssc_p->ssc_state.ssc_imr); - - ssc_p->ssc_state.ssc_cmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_CMR); - ssc_p->ssc_state.ssc_rcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RCMR); - ssc_p->ssc_state.ssc_rfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_RFMR); - ssc_p->ssc_state.ssc_tcmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TCMR); - ssc_p->ssc_state.ssc_tfmr = at91_ssc_read(ssc_p->ssc.base + AT91_SSC_TFMR); - - return 0; -} - -static int at91_ssc_resume(struct platform_device *pdev, - struct snd_soc_dai *cpu_dai) -{ - struct at91_ssc_info *ssc_p; - - if(!cpu_dai->active) - return 0; - - ssc_p = &ssc_info[cpu_dai->id]; - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TFMR, ssc_p->ssc_state.ssc_tfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_TCMR, ssc_p->ssc_state.ssc_tcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RFMR, ssc_p->ssc_state.ssc_rfmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_RCMR, ssc_p->ssc_state.ssc_rcmr); - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CMR, ssc_p->ssc_state.ssc_cmr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_IER, ssc_p->ssc_state.ssc_imr); - - at91_ssc_write(ssc_p->ssc.base + AT91_SSC_CR, - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_RXENA) ? AT91_SSC_RXEN : 0) | - ((ssc_p->ssc_state.ssc_sr & AT91_SSC_TXENA) ? AT91_SSC_TXEN : 0)); - - return 0; -} - -#else -#define at91_ssc_suspend NULL -#define at91_ssc_resume NULL -#endif - -#define AT91_SSC_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ - SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 |\ - SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 |\ - SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_88200 |\ - SNDRV_PCM_RATE_96000) - -#define AT91_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ - SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) - -struct snd_soc_dai at91_ssc_dai[NUM_SSC_DEVICES] = { - { .name = "at91-ssc0", - .id = 0, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[0].ssc, - }, -#if NUM_SSC_DEVICES == 3 - { .name = "at91-ssc1", - .id = 1, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[1].ssc, - }, - { .name = "at91-ssc2", - .id = 2, - .type = SND_SOC_DAI_PCM, - .suspend = at91_ssc_suspend, - .resume = at91_ssc_resume, - .playback = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .capture = { - .channels_min = 1, - .channels_max = 2, - .rates = AT91_SSC_RATES, - .formats = AT91_SSC_FORMATS,}, - .ops = { - .startup = at91_ssc_startup, - .shutdown = at91_ssc_shutdown, - .prepare = at91_ssc_prepare, - .hw_params = at91_ssc_hw_params,}, - .dai_ops = { - .set_sysclk = at91_ssc_set_dai_sysclk, - .set_fmt = at91_ssc_set_dai_fmt, - .set_clkdiv = at91_ssc_set_dai_clkdiv,}, - .private_data = &ssc_info[2].ssc, - }, -#endif -}; - -EXPORT_SYMBOL_GPL(at91_ssc_dai); - -/* Module information */ -MODULE_AUTHOR("Frank Mandarino, fmandarino@endrelia.com, www.endrelia.com"); -MODULE_DESCRIPTION("AT91 SSC ASoC Interface"); -MODULE_LICENSE("GPL"); diff --git a/sound/soc/at91/at91-ssc.h b/sound/soc/at91/at91-ssc.h deleted file mode 100644 index 6b7bf382d06f..000000000000 --- a/sound/soc/at91/at91-ssc.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * at91-ssc.h - ALSA SSC interface for the Atmel AT91 SoC - * - * Author: Frank Mandarino <fmandarino@endrelia.com> - * Endrelia Technologies Inc. - * Created: Jan 9, 2007 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef _AT91_SSC_H -#define _AT91_SSC_H - -/* SSC system clock ids */ -#define AT91_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ - -/* SSC divider ids */ -#define AT91SSC_CMR_DIV 0 /* MCK divider for BCLK */ -#define AT91SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ -#define AT91SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ - -extern struct snd_soc_dai at91_ssc_dai[]; - -#endif /* _AT91_SSC_H */ - diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig new file mode 100644 index 000000000000..a608d7009dbd --- /dev/null +++ b/sound/soc/atmel/Kconfig @@ -0,0 +1,43 @@ +config SND_ATMEL_SOC + tristate "SoC Audio for the Atmel System-on-Chip" + depends on ARCH_AT91 || AVR32 + help + Say Y or M if you want to add support for codecs attached to + the ATMEL SSC interface. You will also need + to select the audio interfaces to support below. + +config SND_ATMEL_SOC_SSC + tristate + depends on SND_ATMEL_SOC + help + Say Y or M if you want to add support for codecs the + ATMEL SSC interface. You will also needs to select the individual + machine drivers to support below. + +config SND_AT91_SOC_SAM9G20_WM8731 + tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" + depends on ATMEL_SSC && ARCH_AT91SAM9G20 && SND_ATMEL_SOC + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8731 + help + Say Y if you want to add support for SoC audio on WM8731-based + AT91sam9g20 evaluation board. + +config SND_AT32_SOC_PLAYPAQ + tristate "SoC Audio support for PlayPaq with WM8510" + depends on SND_ATMEL_SOC && BOARD_PLAYPAQ + select SND_ATMEL_SOC_SSC + select SND_SOC_WM8510 + help + Say Y or M here if you want to add support for SoC audio + on the LRS PlayPaq. + +config SND_AT32_SOC_PLAYPAQ_SLAVE + bool "Run CODEC on PlayPaq in slave mode" + depends on SND_AT32_SOC_PLAYPAQ + default n + help + Say Y if you want to run with the AT32 SSC generating the BCLK + and FRAME signals on the PlayPaq. Unless you want to play + with the AT32 as the SSC master, you probably want to say N here, + as this will give you better sound quality. diff --git a/sound/soc/atmel/Makefile b/sound/soc/atmel/Makefile new file mode 100644 index 000000000000..f54a7cc68e66 --- /dev/null +++ b/sound/soc/atmel/Makefile @@ -0,0 +1,15 @@ +# AT91 Platform Support +snd-soc-atmel-pcm-objs := atmel-pcm.o +snd-soc-atmel_ssc_dai-objs := atmel_ssc_dai.o + +obj-$(CONFIG_SND_ATMEL_SOC) += snd-soc-atmel-pcm.o +obj-$(CONFIG_SND_ATMEL_SOC_SSC) += snd-soc-atmel_ssc_dai.o + +# AT91 Machine Support +snd-soc-sam9g20-wm8731-objs := sam9g20_wm8731.o + +# AT32 Machine Support +snd-soc-playpaq-objs := playpaq_wm8510.o + +obj-$(CONFIG_SND_AT91_SOC_SAM9G20_WM8731) += snd-soc-sam9g20-wm8731.o +obj-$(CONFIG_SND_AT32_SOC_PLAYPAQ) += snd-soc-playpaq.o diff --git a/sound/soc/at32/at32-pcm.c b/sound/soc/atmel/atmel-pcm.c index c83584f989a9..394412fb396f 100644 --- a/sound/soc/at32/at32-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -1,15 +1,34 @@ -/* sound/soc/at32/at32-pcm.c - * ASoC PCM interface for Atmel AT32 SoC +/* + * atmel-pcm.c -- ALSA PCM interface for the Atmel atmel SoC. * - * Copyright (C) 2008 Long Range Systems - * Geoffrey Wossum <gwossum@acm.org> + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino@endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. * * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. * - * Note that this is basically a port of the sound/soc/at91-pcm.c to - * the AVR32 kernel. Thanks to Frank Mandarino for that code. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/module.h> @@ -18,14 +37,16 @@ #include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/atmel_pdc.h> +#include <linux/atmel-ssc.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> #include <sound/soc.h> -#include "at32-pcm.h" +#include <mach/hardware.h> +#include "atmel-pcm.h" /*--------------------------------------------------------------------------*\ @@ -34,36 +55,33 @@ /* TODO: These values were taken from the AT91 platform driver, check * them against real values for AT32 */ -static const struct snd_pcm_hardware at32_pcm_hardware = { - .info = (SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_PAUSE), - - .formats = SNDRV_PCM_FMTBIT_S16, - .period_bytes_min = 32, - .period_bytes_max = 8192, /* 512 frames * 16 bytes / frame */ - .periods_min = 2, - .periods_max = 1024, - .buffer_bytes_max = 32 * 1024, +static const struct snd_pcm_hardware atmel_pcm_hardware = { + .info = SNDRV_PCM_INFO_MMAP | + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_PAUSE, + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .period_bytes_min = 32, + .period_bytes_max = 8192, + .periods_min = 2, + .periods_max = 1024, + .buffer_bytes_max = 32 * 1024, }; - /*--------------------------------------------------------------------------*\ * Data types \*--------------------------------------------------------------------------*/ -struct at32_runtime_data { - struct at32_pcm_dma_params *params; - dma_addr_t dma_buffer; /* physical address of DMA buffer */ - dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ +struct atmel_runtime_data { + struct atmel_pcm_dma_params *params; + dma_addr_t dma_buffer; /* physical address of dma buffer */ + dma_addr_t dma_buffer_end; /* first address beyond DMA buffer */ size_t period_size; - dma_addr_t period_ptr; /* physical address of next period */ - int periods; /* period index of period_ptr */ + dma_addr_t period_ptr; /* physical address of next period */ + int periods; /* period index of period_ptr */ - /* Save PDC registers (for power management) */ + /* PDC register save */ u32 pdc_xpr_save; u32 pdc_xcr_save; u32 pdc_xnpr_save; @@ -71,49 +89,51 @@ struct at32_runtime_data { }; - /*--------------------------------------------------------------------------*\ * Helper functions \*--------------------------------------------------------------------------*/ -static int at32_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream) +static int atmel_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, + int stream) { struct snd_pcm_substream *substream = pcm->streams[stream].substream; - struct snd_dma_buffer *dmabuf = &substream->dma_buffer; - size_t size = at32_pcm_hardware.buffer_bytes_max; - - dmabuf->dev.type = SNDRV_DMA_TYPE_DEV; - dmabuf->dev.dev = pcm->card->dev; - dmabuf->private_data = NULL; - dmabuf->area = dma_alloc_coherent(pcm->card->dev, size, - &dmabuf->addr, GFP_KERNEL); - pr_debug("at32_pcm: preallocate_dma_buffer: " - "area=%p, addr=%p, size=%ld\n", - (void *)dmabuf->area, (void *)dmabuf->addr, size); - - if (!dmabuf->area) + struct snd_dma_buffer *buf = &substream->dma_buffer; + size_t size = atmel_pcm_hardware.buffer_bytes_max; + + buf->dev.type = SNDRV_DMA_TYPE_DEV; + buf->dev.dev = pcm->card->dev; + buf->private_data = NULL; + buf->area = dma_alloc_coherent(pcm->card->dev, size, + &buf->addr, GFP_KERNEL); + pr_debug("atmel-pcm:" + "preallocate_dma_buffer: area=%p, addr=%p, size=%d\n", + (void *) buf->area, + (void *) buf->addr, + size); + + if (!buf->area) return -ENOMEM; - dmabuf->bytes = size; + buf->bytes = size; return 0; } - - - /*--------------------------------------------------------------------------*\ * ISR \*--------------------------------------------------------------------------*/ -static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream) +static void atmel_pcm_dma_irq(u32 ssc_sr, + struct snd_pcm_substream *substream) { - struct snd_pcm_runtime *rtd = substream->runtime; - struct at32_runtime_data *prtd = rtd->private_data; - struct at32_pcm_dma_params *params = prtd->params; + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; static int count; count++; + if (ssc_sr & params->mask->ssc_endbuf) { - pr_warning("at32-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n", - substream->stream == SNDRV_PCM_STREAM_PLAYBACK ? - "underrun" : "overrun", params->name, ssc_sr, count); + pr_warning("atmel-pcm: buffer %s on %s" + " (SSC_SR=%#x, count=%d)\n", + substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? "underrun" : "overrun", + params->name, ssc_sr, count); /* re-start the PDC */ ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, @@ -122,7 +142,6 @@ static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream) if (prtd->period_ptr >= prtd->dma_buffer_end) prtd->period_ptr = prtd->dma_buffer; - ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->period_ptr); ssc_writex(params->ssc->regs, params->pdc->xcr, @@ -131,60 +150,58 @@ static void at32_pcm_dma_irq(u32 ssc_sr, struct snd_pcm_substream *substream) params->mask->pdc_enable); } - if (ssc_sr & params->mask->ssc_endx) { /* Load the PDC next pointer and counter registers */ prtd->period_ptr += prtd->period_size; if (prtd->period_ptr >= prtd->dma_buffer_end) prtd->period_ptr = prtd->dma_buffer; + ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->period_ptr); ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->period_size / params->pdc_xfer_size); } - snd_pcm_period_elapsed(substream); } - /*--------------------------------------------------------------------------*\ * PCM operations \*--------------------------------------------------------------------------*/ -static int at32_pcm_hw_params(struct snd_pcm_substream *substream, - struct snd_pcm_hw_params *params) +static int atmel_pcm_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) { struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd = runtime->private_data; + struct atmel_runtime_data *prtd = runtime->private_data; struct snd_soc_pcm_runtime *rtd = substream->private_data; /* this may get called several times by oss emulation - * with different params - */ + * with different params */ + snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); runtime->dma_bytes = params_buffer_bytes(params); prtd->params = rtd->dai->cpu_dai->dma_data; - prtd->params->dma_intr_handler = at32_pcm_dma_irq; + prtd->params->dma_intr_handler = atmel_pcm_dma_irq; prtd->dma_buffer = runtime->dma_addr; prtd->dma_buffer_end = runtime->dma_addr + runtime->dma_bytes; prtd->period_size = params_period_bytes(params); - pr_debug("hw_params: DMA for %s initialized " - "(dma_bytes=%ld, period_size=%ld)\n", - prtd->params->name, runtime->dma_bytes, prtd->period_size); - + pr_debug("atmel-pcm: " + "hw_params: DMA for %s initialized " + "(dma_bytes=%u, period_size=%u)\n", + prtd->params->name, + runtime->dma_bytes, + prtd->period_size); return 0; } - - -static int at32_pcm_hw_free(struct snd_pcm_substream *substream) +static int atmel_pcm_hw_free(struct snd_pcm_substream *substream) { - struct at32_runtime_data *prtd = substream->runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; if (params != NULL) { ssc_writex(params->ssc->regs, SSC_PDC_PTCR, @@ -195,32 +212,29 @@ static int at32_pcm_hw_free(struct snd_pcm_substream *substream) return 0; } - - -static int at32_pcm_prepare(struct snd_pcm_substream *substream) +static int atmel_pcm_prepare(struct snd_pcm_substream *substream) { - struct at32_runtime_data *prtd = substream->runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; + struct atmel_runtime_data *prtd = substream->runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; ssc_writex(params->ssc->regs, SSC_IDR, params->mask->ssc_endx | params->mask->ssc_endbuf); ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_disable); - return 0; } - -static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd) +static int atmel_pcm_trigger(struct snd_pcm_substream *substream, + int cmd) { struct snd_pcm_runtime *rtd = substream->runtime; - struct at32_runtime_data *prtd = rtd->private_data; - struct at32_pcm_dma_params *params = prtd->params; + struct atmel_runtime_data *prtd = rtd->private_data; + struct atmel_pcm_dma_params *params = prtd->params; int ret = 0; - pr_debug("at32_pcm_trigger: buffer_size = %ld, " - "dma_area = %p, dma_bytes = %ld\n", - rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); + pr_debug("atmel-pcm:buffer_size = %ld," + "dma_area = %p, dma_bytes = %u\n", + rtd->buffer_size, rtd->dma_area, rtd->dma_bytes); switch (cmd) { case SNDRV_PCM_TRIGGER_START: @@ -237,26 +251,25 @@ static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd) ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->period_size / params->pdc_xfer_size); - pr_debug("trigger: period_ptr=%lx, xpr=%x, " - "xcr=%d, xnpr=%x, xncr=%d\n", - (unsigned long)prtd->period_ptr, - ssc_readx(params->ssc->regs, params->pdc->xpr), - ssc_readx(params->ssc->regs, params->pdc->xcr), - ssc_readx(params->ssc->regs, params->pdc->xnpr), - ssc_readx(params->ssc->regs, params->pdc->xncr)); + pr_debug("atmel-pcm: trigger: " + "period_ptr=%lx, xpr=%u, " + "xcr=%u, xnpr=%u, xncr=%u\n", + (unsigned long)prtd->period_ptr, + ssc_readx(params->ssc->regs, params->pdc->xpr), + ssc_readx(params->ssc->regs, params->pdc->xcr), + ssc_readx(params->ssc->regs, params->pdc->xnpr), + ssc_readx(params->ssc->regs, params->pdc->xncr)); ssc_writex(params->ssc->regs, SSC_IER, params->mask->ssc_endx | params->mask->ssc_endbuf); ssc_writex(params->ssc->regs, SSC_PDC_PTCR, params->mask->pdc_enable); - pr_debug("sr=%x, imr=%x\n", - ssc_readx(params->ssc->regs, SSC_SR), - ssc_readx(params->ssc->regs, SSC_IER)); + pr_debug("sr=%u imr=%u\n", + ssc_readx(params->ssc->regs, SSC_SR), + ssc_readx(params->ssc->regs, SSC_IER)); break; /* SNDRV_PCM_TRIGGER_START */ - - case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: @@ -264,7 +277,6 @@ static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd) params->mask->pdc_disable); break; - case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, @@ -278,13 +290,12 @@ static int at32_pcm_trigger(struct snd_pcm_substream *substream, int cmd) return ret; } - - -static snd_pcm_uframes_t at32_pcm_pointer(struct snd_pcm_substream *substream) +static snd_pcm_uframes_t atmel_pcm_pointer( + struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd = runtime->private_data; - struct at32_pcm_dma_params *params = prtd->params; + struct atmel_runtime_data *prtd = runtime->private_data; + struct atmel_pcm_dma_params *params = prtd->params; dma_addr_t ptr; snd_pcm_uframes_t x; @@ -297,108 +308,95 @@ static snd_pcm_uframes_t at32_pcm_pointer(struct snd_pcm_substream *substream) return x; } - - -static int at32_pcm_open(struct snd_pcm_substream *substream) +static int atmel_pcm_open(struct snd_pcm_substream *substream) { struct snd_pcm_runtime *runtime = substream->runtime; - struct at32_runtime_data *prtd; + struct atmel_runtime_data *prtd; int ret = 0; - snd_soc_set_runtime_hwparams(substream, &at32_pcm_hardware); + snd_soc_set_runtime_hwparams(substream, &atmel_pcm_hardware); /* ensure that buffer size is a multiple of period size */ ret = snd_pcm_hw_constraint_integer(runtime, - SNDRV_PCM_HW_PARAM_PERIODS); + SNDRV_PCM_HW_PARAM_PERIODS); if (ret < 0) goto out; - prtd = kzalloc(sizeof(*prtd), GFP_KERNEL); + prtd = kzalloc(sizeof(struct atmel_runtime_data), GFP_KERNEL); if (prtd == NULL) { ret = -ENOMEM; goto out; } runtime->private_data = prtd; - -out: + out: return ret; } - - -static int at32_pcm_close(struct snd_pcm_substream *substream) +static int atmel_pcm_close(struct snd_pcm_substream *substream) { - struct at32_runtime_data *prtd = substream->runtime->private_data; + struct atmel_runtime_data *prtd = substream->runtime->private_data; kfree(prtd); return 0; } - -static int at32_pcm_mmap(struct snd_pcm_substream *substream, - struct vm_area_struct *vma) +static int atmel_pcm_mmap(struct snd_pcm_substream *substream, + struct vm_area_struct *vma) { return remap_pfn_range(vma, vma->vm_start, - substream->dma_buffer.addr >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot); + substream->dma_buffer.addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot); } - - -static struct snd_pcm_ops at32_pcm_ops = { - .open = at32_pcm_open, - .close = at32_pcm_close, - .ioctl = snd_pcm_lib_ioctl, - .hw_params = at32_pcm_hw_params, - .hw_free = at32_pcm_hw_free, - .prepare = at32_pcm_prepare, - .trigger = at32_pcm_trigger, - .pointer = at32_pcm_pointer, - .mmap = at32_pcm_mmap, +struct snd_pcm_ops atmel_pcm_ops = { + .open = atmel_pcm_open, + .close = atmel_pcm_close, + .ioctl = snd_pcm_lib_ioctl, + .hw_params = atmel_pcm_hw_params, + .hw_free = atmel_pcm_hw_free, + .prepare = atmel_pcm_prepare, + .trigger = atmel_pcm_trigger, + .pointer = atmel_pcm_pointer, + .mmap = atmel_pcm_mmap, }; - /*--------------------------------------------------------------------------*\ * ASoC platform driver \*--------------------------------------------------------------------------*/ -static u64 at32_pcm_dmamask = 0xffffffff; +static u64 atmel_pcm_dmamask = 0xffffffff; -static int at32_pcm_new(struct snd_card *card, - struct snd_soc_dai *dai, - struct snd_pcm *pcm) +static int atmel_pcm_new(struct snd_card *card, + struct snd_soc_dai *dai, struct snd_pcm *pcm) { int ret = 0; if (!card->dev->dma_mask) - card->dev->dma_mask = &at32_pcm_dmamask; + card->dev->dma_mask = &atmel_pcm_dmamask; if (!card->dev->coherent_dma_mask) card->dev->coherent_dma_mask = 0xffffffff; if (dai->playback.channels_min) { - ret = at32_pcm_preallocate_dma_buffer( - pcm, SNDRV_PCM_STREAM_PLAYBACK); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_PLAYBACK); if (ret) goto out; } if (dai->capture.channels_min) { - pr_debug("at32-pcm: Allocating PCM capture DMA buffer\n"); - ret = at32_pcm_preallocate_dma_buffer( - pcm, SNDRV_PCM_STREAM_CAPTURE); + pr_debug("at32-pcm:" + "Allocating PCM capture DMA buffer\n"); + ret = atmel_pcm_preallocate_dma_buffer(pcm, + SNDRV_PCM_STREAM_CAPTURE); if (ret) goto out; } - - -out: + out: return ret; } - - -static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm) +static void atmel_pcm_free_dma_buffers(struct snd_pcm *pcm) { struct snd_pcm_substream *substream; struct snd_dma_buffer *buf; @@ -406,7 +404,7 @@ static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm) for (stream = 0; stream < 2; stream++) { substream = pcm->streams[stream].substream; - if (substream == NULL) + if (!substream) continue; buf = &substream->dma_buffer; @@ -418,24 +416,23 @@ static void at32_pcm_free_dma_buffers(struct snd_pcm *pcm) } } - - #ifdef CONFIG_PM -static int at32_pcm_suspend(struct platform_device *pdev, - struct snd_soc_dai *dai) +static int atmel_pcm_suspend(struct platform_device *pdev, + struct snd_soc_dai *dai) { struct snd_pcm_runtime *runtime = dai->runtime; - struct at32_runtime_data *prtd; - struct at32_pcm_dma_params *params; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; - if (runtime == NULL) + if (!runtime) return 0; + prtd = runtime->private_data; params = prtd->params; - /* Disable the PDC and save the PDC registers */ - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, - params->mask->pdc_disable); + /* disable the PDC and save the PDC registers */ + + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_disable); prtd->pdc_xpr_save = ssc_readx(params->ssc->regs, params->pdc->xpr); prtd->pdc_xcr_save = ssc_readx(params->ssc->regs, params->pdc->xcr); @@ -445,48 +442,43 @@ static int at32_pcm_suspend(struct platform_device *pdev, return 0; } - - -static int at32_pcm_resume(struct platform_device *pdev, - struct snd_soc_dai *dai) +static int atmel_pcm_resume(struct platform_device *pdev, + struct snd_soc_dai *dai) { struct snd_pcm_runtime *runtime = dai->runtime; - struct at32_runtime_data *prtd; - struct at32_pcm_dma_params *params; + struct atmel_runtime_data *prtd; + struct atmel_pcm_dma_params *params; - if (runtime == NULL) + if (!runtime) return 0; + prtd = runtime->private_data; params = prtd->params; - /* Restore the PDC registers and enable the PDC */ + /* restore the PDC registers and enable the PDC */ ssc_writex(params->ssc->regs, params->pdc->xpr, prtd->pdc_xpr_save); ssc_writex(params->ssc->regs, params->pdc->xcr, prtd->pdc_xcr_save); ssc_writex(params->ssc->regs, params->pdc->xnpr, prtd->pdc_xnpr_save); ssc_writex(params->ssc->regs, params->pdc->xncr, prtd->pdc_xncr_save); - ssc_writex(params->ssc->regs, ATMEL_PDC_PTCR, params->mask->pdc_enable); + ssc_writel(params->ssc->regs, PDC_PTCR, params->mask->pdc_enable); return 0; } -#else /* CONFIG_PM */ -# define at32_pcm_suspend NULL -# define at32_pcm_resume NULL -#endif /* CONFIG_PM */ - - - -struct snd_soc_platform at32_soc_platform = { - .name = "at32-audio", - .pcm_ops = &at32_pcm_ops, - .pcm_new = at32_pcm_new, - .pcm_free = at32_pcm_free_dma_buffers, - .suspend = at32_pcm_suspend, - .resume = at32_pcm_resume, +#else +#define atmel_pcm_suspend NULL +#define atmel_pcm_resume NULL +#endif + +struct snd_soc_platform atmel_soc_platform = { + .name = "atmel-audio", + .pcm_ops = &atmel_pcm_ops, + .pcm_new = atmel_pcm_new, + .pcm_free = atmel_pcm_free_dma_buffers, + .suspend = atmel_pcm_suspend, + .resume = atmel_pcm_resume, }; -EXPORT_SYMBOL_GPL(at32_soc_platform); - - +EXPORT_SYMBOL_GPL(atmel_soc_platform); -MODULE_AUTHOR("Geoffrey Wossum <gwossum@acm.org>"); -MODULE_DESCRIPTION("Atmel AT32 PCM module"); +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>"); +MODULE_DESCRIPTION("Atmel PCM module"); MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel-pcm.h b/sound/soc/atmel/atmel-pcm.h new file mode 100644 index 000000000000..ec9b2824b663 --- /dev/null +++ b/sound/soc/atmel/atmel-pcm.h @@ -0,0 +1,86 @@ +/* + * at91-pcm.h - ALSA PCM interface for the Atmel AT91 SoC. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * + * Based on at91-pcm. by: + * Frank Mandarino <fmandarino@endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * + * Based on pxa2xx-pcm.c by: + * + * Author: Nicolas Pitre + * Created: Nov 30, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_PCM_H +#define _ATMEL_PCM_H + +#include <linux/atmel-ssc.h> + +/* + * Registers and status bits that are required by the PCM driver. + */ +struct atmel_pdc_regs { + unsigned int xpr; /* PDC recv/trans pointer */ + unsigned int xcr; /* PDC recv/trans counter */ + unsigned int xnpr; /* PDC next recv/trans pointer */ + unsigned int xncr; /* PDC next recv/trans counter */ + unsigned int ptcr; /* PDC transfer control */ +}; + +struct atmel_ssc_mask { + u32 ssc_enable; /* SSC recv/trans enable */ + u32 ssc_disable; /* SSC recv/trans disable */ + u32 ssc_endx; /* SSC ENDTX or ENDRX */ + u32 ssc_endbuf; /* SSC TXBUFE or RXBUFF */ + u32 pdc_enable; /* PDC recv/trans enable */ + u32 pdc_disable; /* PDC recv/trans disable */ +}; + +/* + * This structure, shared between the PCM driver and the interface, + * contains all information required by the PCM driver to perform the + * PDC DMA operation. All fields except dma_intr_handler() are initialized + * by the interface. The dms_intr_handler() pointer is set by the PCM + * driver and called by the interface SSC interrupt handler if it is + * non-NULL. + */ +struct atmel_pcm_dma_params { + char *name; /* stream identifier */ + int pdc_xfer_size; /* PDC counter increment in bytes */ + struct ssc_device *ssc; /* SSC device for stream */ + struct atmel_pdc_regs *pdc; /* PDC receive or transmit registers */ + struct atmel_ssc_mask *mask; /* SSC & PDC status bits */ + struct snd_pcm_substream *substream; + void (*dma_intr_handler)(u32, struct snd_pcm_substream *); +}; + +extern struct snd_soc_platform atmel_soc_platform; + + +/* + * SSC register access (since ssc_writel() / ssc_readl() require literal name) + */ +#define ssc_readx(base, reg) (__raw_readl((base) + (reg))) +#define ssc_writex(base, reg, value) __raw_writel((value), (base) + (reg)) + +#endif /* _ATMEL_PCM_H */ diff --git a/sound/soc/atmel/atmel_ssc_dai.c b/sound/soc/atmel/atmel_ssc_dai.c new file mode 100644 index 000000000000..d290b7894917 --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.c @@ -0,0 +1,782 @@ +/* + * atmel_ssc_dai.c -- ALSA SoC ATMEL SSC Audio Layer Platform driver + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino@endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood@wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/atmel_pdc.h> + +#include <linux/atmel-ssc.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/initval.h> +#include <sound/soc.h> + +#include <mach/hardware.h> + +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20) +#define NUM_SSC_DEVICES 1 +#else +#define NUM_SSC_DEVICES 3 +#endif + +/* + * SSC PDC registers required by the PCM DMA engine. + */ +static struct atmel_pdc_regs pdc_tx_reg = { + .xpr = ATMEL_PDC_TPR, + .xcr = ATMEL_PDC_TCR, + .xnpr = ATMEL_PDC_TNPR, + .xncr = ATMEL_PDC_TNCR, +}; + +static struct atmel_pdc_regs pdc_rx_reg = { + .xpr = ATMEL_PDC_RPR, + .xcr = ATMEL_PDC_RCR, + .xnpr = ATMEL_PDC_RNPR, + .xncr = ATMEL_PDC_RNCR, +}; + +/* + * SSC & PDC status bits for transmit and receive. + */ +static struct atmel_ssc_mask ssc_tx_mask = { + .ssc_enable = SSC_BIT(CR_TXEN), + .ssc_disable = SSC_BIT(CR_TXDIS), + .ssc_endx = SSC_BIT(SR_ENDTX), + .ssc_endbuf = SSC_BIT(SR_TXBUFE), + .pdc_enable = ATMEL_PDC_TXTEN, + .pdc_disable = ATMEL_PDC_TXTDIS, +}; + +static struct atmel_ssc_mask ssc_rx_mask = { + .ssc_enable = SSC_BIT(CR_RXEN), + .ssc_disable = SSC_BIT(CR_RXDIS), + .ssc_endx = SSC_BIT(SR_ENDRX), + .ssc_endbuf = SSC_BIT(SR_RXBUFF), + .pdc_enable = ATMEL_PDC_RXTEN, + .pdc_disable = ATMEL_PDC_RXTDIS, +}; + + +/* + * DMA parameters. + */ +static struct atmel_pcm_dma_params ssc_dma_params[NUM_SSC_DEVICES][2] = { + {{ + .name = "SSC0 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC0 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#if NUM_SSC_DEVICES == 3 + {{ + .name = "SSC1 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC1 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, + {{ + .name = "SSC2 PCM out", + .pdc = &pdc_tx_reg, + .mask = &ssc_tx_mask, + }, + { + .name = "SSC2 PCM in", + .pdc = &pdc_rx_reg, + .mask = &ssc_rx_mask, + } }, +#endif +}; + + +static struct atmel_ssc_info ssc_info[NUM_SSC_DEVICES] = { + { + .name = "ssc0", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[0].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#if NUM_SSC_DEVICES == 3 + { + .name = "ssc1", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[1].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, + { + .name = "ssc2", + .lock = __SPIN_LOCK_UNLOCKED(ssc_info[2].lock), + .dir_mask = SSC_DIR_MASK_UNUSED, + .initialized = 0, + }, +#endif +}; + + +/* + * SSC interrupt handler. Passes PDC interrupts to the DMA + * interrupt handler in the PCM driver. + */ +static irqreturn_t atmel_ssc_interrupt(int irq, void *dev_id) +{ + struct atmel_ssc_info *ssc_p = dev_id; + struct atmel_pcm_dma_params *dma_params; + u32 ssc_sr; + u32 ssc_substream_mask; + int i; + + ssc_sr = (unsigned long)ssc_readl(ssc_p->ssc->regs, SR) + & (unsigned long)ssc_readl(ssc_p->ssc->regs, IMR); + + /* + * Loop through the substreams attached to this SSC. If + * a DMA-related interrupt occurred on that substream, call + * the DMA interrupt handler function, if one has been + * registered in the dma_params structure by the PCM driver. + */ + for (i = 0; i < ARRAY_SIZE(ssc_p->dma_params); i++) { + dma_params = ssc_p->dma_params[i]; + + if ((dma_params != NULL) && + (dma_params->dma_intr_handler != NULL)) { + ssc_substream_mask = (dma_params->mask->ssc_endx | + dma_params->mask->ssc_endbuf); + if (ssc_sr & ssc_substream_mask) { + dma_params->dma_intr_handler(ssc_sr, + dma_params-> + substream); + } + } + } + + return IRQ_HANDLED; +} + + +/*-------------------------------------------------------------------------*\ + * DAI functions +\*-------------------------------------------------------------------------*/ +/* + * Startup. Only that one substream allowed in each direction. + */ +static int atmel_ssc_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + int dir_mask; + + pr_debug("atmel_ssc_startup: SSC_SR=0x%u\n", + ssc_readl(ssc_p->ssc->regs, SR)); + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir_mask = SSC_DIR_MASK_PLAYBACK; + else + dir_mask = SSC_DIR_MASK_CAPTURE; + + spin_lock_irq(&ssc_p->lock); + if (ssc_p->dir_mask & dir_mask) { + spin_unlock_irq(&ssc_p->lock); + return -EBUSY; + } + ssc_p->dir_mask |= dir_mask; + spin_unlock_irq(&ssc_p->lock); + + return 0; +} + +/* + * Shutdown. Clear DMA parameters and shutdown the SSC if there + * are no other substreams open. + */ +static void atmel_ssc_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir, dir_mask; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + if (dma_params != NULL) { + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_disable); + pr_debug("atmel_ssc_shutdown: %s disabled SSC_SR=0x%08x\n", + (dir ? "receive" : "transmit"), + ssc_readl(ssc_p->ssc->regs, SR)); + + dma_params->ssc = NULL; + dma_params->substream = NULL; + ssc_p->dma_params[dir] = NULL; + } + + dir_mask = 1 << dir; + + spin_lock_irq(&ssc_p->lock); + ssc_p->dir_mask &= ~dir_mask; + if (!ssc_p->dir_mask) { + if (ssc_p->initialized) { + /* Shutdown the SSC clock. */ + pr_debug("atmel_ssc_dau: Stopping clock\n"); + clk_disable(ssc_p->ssc->clk); + + free_irq(ssc_p->ssc->irq, ssc_p); + ssc_p->initialized = 0; + } + + /* Reset the SSC */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + /* Clear the SSC dividers */ + ssc_p->cmr_div = ssc_p->tcmr_period = ssc_p->rcmr_period = 0; + } + spin_unlock_irq(&ssc_p->lock); +} + + +/* + * Record the DAI format for use in hw_params(). + */ +static int atmel_ssc_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + ssc_p->daifmt = fmt; + return 0; +} + +/* + * Record SSC clock dividers for use in hw_params(). + */ +static int atmel_ssc_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct atmel_ssc_info *ssc_p = &ssc_info[cpu_dai->id]; + + switch (div_id) { + case ATMEL_SSC_CMR_DIV: + /* + * The same master clock divider is used for both + * transmit and receive, so if a value has already + * been set, it must match this value. + */ + if (ssc_p->cmr_div == 0) + ssc_p->cmr_div = div; + else + if (div != ssc_p->cmr_div) + return -EBUSY; + break; + + case ATMEL_SSC_TCMR_PERIOD: + ssc_p->tcmr_period = div; + break; + + case ATMEL_SSC_RCMR_PERIOD: + ssc_p->rcmr_period = div; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* + * Configure the SSC. + */ +static int atmel_ssc_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + int id = rtd->dai->cpu_dai->id; + struct atmel_ssc_info *ssc_p = &ssc_info[id]; + struct atmel_pcm_dma_params *dma_params; + int dir, channels, bits; + u32 tfmr, rfmr, tcmr, rcmr; + int start_event; + int ret; + + /* + * Currently, there is only one set of dma params for + * each direction. If more are added, this code will + * have to be changed to select the proper set. + */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = &ssc_dma_params[id][dir]; + dma_params->ssc = ssc_p->ssc; + dma_params->substream = substream; + + ssc_p->dma_params[dir] = dma_params; + + /* + * The cpu_dai->dma_data field is only used to communicate the + * appropriate DMA parameters to the pcm driver hw_params() + * function. It should not be used for other purposes + * as it is common to all substreams. + */ + rtd->dai->cpu_dai->dma_data = dma_params; + + channels = params_channels(params); + + /* + * Determine sample size in bits and the PDC increment. + */ + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S8: + bits = 8; + dma_params->pdc_xfer_size = 1; + break; + case SNDRV_PCM_FORMAT_S16_LE: + bits = 16; + dma_params->pdc_xfer_size = 2; + break; + case SNDRV_PCM_FORMAT_S24_LE: + bits = 24; + dma_params->pdc_xfer_size = 4; + break; + case SNDRV_PCM_FORMAT_S32_LE: + bits = 32; + dma_params->pdc_xfer_size = 4; + break; + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format"); + return -EINVAL; + } + + /* + * The SSC only supports up to 16-bit samples in I2S format, due + * to the size of the Frame Mode Register FSLEN field. + */ + if ((ssc_p->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) == SND_SOC_DAIFMT_I2S + && bits > 16) { + printk(KERN_WARNING + "atmel_ssc_dai: sample size %d" + "is too large for I2S\n", bits); + return -EINVAL; + } + + /* + * Compute SSC register settings. + */ + switch (ssc_p->daifmt + & (SND_SOC_DAIFMT_FORMAT_MASK | SND_SOC_DAIFMT_MASTER_MASK)) { + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBS_CFS: + /* + * I2S format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated + * from the MCK divider, and the BCLK signal + * is output on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, SSC_START_FALLING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(RFMR_FSLEN, (bits - 1)) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, SSC_START_FALLING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NEGATIVE) + | SSC_BF(TFMR_FSLEN, (bits - 1)) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_CBM_CFM: + /* + * I2S format, CODEC supplies BCLK and LRC clocks. + * + * The SSC transmit clock is obtained from the BCLK signal on + * on the TK line, and the SSC receive clock is + * generated from the transmit clock. + * + * For single channel data, one sample is transferred + * on the falling edge of the LRC clock. + * For two channel data, one sample is + * transferred on both edges of the LRC clock. + */ + start_event = ((channels == 1) + ? SSC_START_FALLING_RF + : SSC_START_EDGE_RF); + + rcmr = SSC_BF(RCMR_PERIOD, 0) + | SSC_BF(RCMR_STTDLY, START_DELAY) + | SSC_BF(RCMR_START, start_event) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_CLOCK); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, 0) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, 0) + | SSC_BF(TCMR_STTDLY, START_DELAY) + | SSC_BF(TCMR_START, start_event) + | SSC_BF(TCMR_CKI, SSC_CKI_FALLING) + | SSC_BF(TCMR_CKO, SSC_CKO_NONE) + | SSC_BF(TCMR_CKS, SSC_CKS_PIN); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_NONE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, 0) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBS_CFS: + /* + * DSP/PCM Mode A format, SSC provides BCLK and LRC clocks. + * + * The SSC transmit and receive clocks are generated from the + * MCK divider, and the BCLK signal is output + * on the SSC TK line. + */ + rcmr = SSC_BF(RCMR_PERIOD, ssc_p->rcmr_period) + | SSC_BF(RCMR_STTDLY, 1) + | SSC_BF(RCMR_START, SSC_START_RISING_RF) + | SSC_BF(RCMR_CKI, SSC_CKI_RISING) + | SSC_BF(RCMR_CKO, SSC_CKO_NONE) + | SSC_BF(RCMR_CKS, SSC_CKS_DIV); + + rfmr = SSC_BF(RFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(RFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(RFMR_FSLEN, 0) + | SSC_BF(RFMR_DATNB, (channels - 1)) + | SSC_BIT(RFMR_MSBF) + | SSC_BF(RFMR_LOOP, 0) + | SSC_BF(RFMR_DATLEN, (bits - 1)); + + tcmr = SSC_BF(TCMR_PERIOD, ssc_p->tcmr_period) + | SSC_BF(TCMR_STTDLY, 1) + | SSC_BF(TCMR_START, SSC_START_RISING_RF) + | SSC_BF(TCMR_CKI, SSC_CKI_RISING) + | SSC_BF(TCMR_CKO, SSC_CKO_CONTINUOUS) + | SSC_BF(TCMR_CKS, SSC_CKS_DIV); + + tfmr = SSC_BF(TFMR_FSEDGE, SSC_FSEDGE_POSITIVE) + | SSC_BF(TFMR_FSDEN, 0) + | SSC_BF(TFMR_FSOS, SSC_FSOS_POSITIVE) + | SSC_BF(TFMR_FSLEN, 0) + | SSC_BF(TFMR_DATNB, (channels - 1)) + | SSC_BIT(TFMR_MSBF) + | SSC_BF(TFMR_DATDEF, 0) + | SSC_BF(TFMR_DATLEN, (bits - 1)); + break; + + case SND_SOC_DAIFMT_DSP_A | SND_SOC_DAIFMT_CBM_CFM: + default: + printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n", + ssc_p->daifmt); + return -EINVAL; + break; + } + pr_debug("atmel_ssc_hw_params: " + "RCMR=%08x RFMR=%08x TCMR=%08x TFMR=%08x\n", + rcmr, rfmr, tcmr, tfmr); + + if (!ssc_p->initialized) { + + /* Enable PMC peripheral clock for this SSC */ + pr_debug("atmel_ssc_dai: Starting clock\n"); + clk_enable(ssc_p->ssc->clk); + + /* Reset the SSC and its PDC registers */ + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_SWRST)); + + ssc_writel(ssc_p->ssc->regs, PDC_RPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_RNCR, 0); + + ssc_writel(ssc_p->ssc->regs, PDC_TPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TCR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNPR, 0); + ssc_writel(ssc_p->ssc->regs, PDC_TNCR, 0); + + ret = request_irq(ssc_p->ssc->irq, atmel_ssc_interrupt, 0, + ssc_p->name, ssc_p); + if (ret < 0) { + printk(KERN_WARNING + "atmel_ssc_dai: request_irq failure\n"); + pr_debug("Atmel_ssc_dai: Stoping clock\n"); + clk_disable(ssc_p->ssc->clk); + return ret; + } + + ssc_p->initialized = 1; + } + + /* set SSC clock mode register */ + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->cmr_div); + + /* set receive clock mode and format */ + ssc_writel(ssc_p->ssc->regs, RCMR, rcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, rfmr); + + /* set transmit clock mode and format */ + ssc_writel(ssc_p->ssc->regs, TCMR, tcmr); + ssc_writel(ssc_p->ssc->regs, TFMR, tfmr); + + pr_debug("atmel_ssc_dai,hw_params: SSC initialized\n"); + return 0; +} + + +static int atmel_ssc_prepare(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct atmel_ssc_info *ssc_p = &ssc_info[rtd->dai->cpu_dai->id]; + struct atmel_pcm_dma_params *dma_params; + int dir; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + dir = 0; + else + dir = 1; + + dma_params = ssc_p->dma_params[dir]; + + ssc_writel(ssc_p->ssc->regs, CR, dma_params->mask->ssc_enable); + + pr_debug("%s enabled SSC_SR=0x%08x\n", + dir ? "receive" : "transmit", + ssc_readl(ssc_p->ssc->regs, SR)); + return 0; +} + + +#ifdef CONFIG_PM +static int atmel_ssc_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* Save the status register before disabling transmit and receive */ + ssc_p->ssc_state.ssc_sr = ssc_readl(ssc_p->ssc->regs, SR); + ssc_writel(ssc_p->ssc->regs, CR, SSC_BIT(CR_TXDIS) | SSC_BIT(CR_RXDIS)); + + /* Save the current interrupt mask, then disable unmasked interrupts */ + ssc_p->ssc_state.ssc_imr = ssc_readl(ssc_p->ssc->regs, IMR); + ssc_writel(ssc_p->ssc->regs, IDR, ssc_p->ssc_state.ssc_imr); + + ssc_p->ssc_state.ssc_cmr = ssc_readl(ssc_p->ssc->regs, CMR); + ssc_p->ssc_state.ssc_rcmr = ssc_readl(ssc_p->ssc->regs, RCMR); + ssc_p->ssc_state.ssc_rfmr = ssc_readl(ssc_p->ssc->regs, RFMR); + ssc_p->ssc_state.ssc_tcmr = ssc_readl(ssc_p->ssc->regs, TCMR); + ssc_p->ssc_state.ssc_tfmr = ssc_readl(ssc_p->ssc->regs, TFMR); + + return 0; +} + + + +static int atmel_ssc_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct atmel_ssc_info *ssc_p; + u32 cr; + + if (!cpu_dai->active) + return 0; + + ssc_p = &ssc_info[cpu_dai->id]; + + /* restore SSC register settings */ + ssc_writel(ssc_p->ssc->regs, TFMR, ssc_p->ssc_state.ssc_tfmr); + ssc_writel(ssc_p->ssc->regs, TCMR, ssc_p->ssc_state.ssc_tcmr); + ssc_writel(ssc_p->ssc->regs, RFMR, ssc_p->ssc_state.ssc_rfmr); + ssc_writel(ssc_p->ssc->regs, RCMR, ssc_p->ssc_state.ssc_rcmr); + ssc_writel(ssc_p->ssc->regs, CMR, ssc_p->ssc_state.ssc_cmr); + + /* re-enable interrupts */ + ssc_writel(ssc_p->ssc->regs, IER, ssc_p->ssc_state.ssc_imr); + + /* Re-enable recieve and transmit as appropriate */ + cr = 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_RXEN)) ? SSC_BIT(CR_RXEN) : 0; + cr |= + (ssc_p->ssc_state.ssc_sr & SSC_BIT(SR_TXEN)) ? SSC_BIT(CR_TXEN) : 0; + ssc_writel(ssc_p->ssc->regs, CR, cr); + + return 0; +} +#else /* CONFIG_PM */ +# define atmel_ssc_suspend NULL +# define atmel_ssc_resume NULL +#endif /* CONFIG_PM */ + + +#define ATMEL_SSC_RATES (SNDRV_PCM_RATE_8000_96000) + +#define ATMEL_SSC_FORMATS (SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai atmel_ssc_dai[NUM_SSC_DEVICES] = { + { .name = "atmel-ssc0", + .id = 0, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[0], + }, +#if NUM_SSC_DEVICES == 3 + { .name = "atmel-ssc1", + .id = 1, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[1], + }, + { .name = "atmel-ssc2", + .id = 2, + .type = SND_SOC_DAI_PCM, + .suspend = atmel_ssc_suspend, + .resume = atmel_ssc_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = ATMEL_SSC_RATES, + .formats = ATMEL_SSC_FORMATS,}, + .ops = { + .startup = atmel_ssc_startup, + .shutdown = atmel_ssc_shutdown, + .prepare = atmel_ssc_prepare, + .hw_params = atmel_ssc_hw_params,}, + .dai_ops = { + .set_fmt = atmel_ssc_set_dai_fmt, + .set_clkdiv = atmel_ssc_set_dai_clkdiv,}, + .private_data = &ssc_info[2], + }, +#endif +}; +EXPORT_SYMBOL_GPL(atmel_ssc_dai); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou, sedji.gaouaou@atmel.com, www.atmel.com"); +MODULE_DESCRIPTION("ATMEL SSC ASoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/atmel/atmel_ssc_dai.h b/sound/soc/atmel/atmel_ssc_dai.h new file mode 100644 index 000000000000..a828746e8a2f --- /dev/null +++ b/sound/soc/atmel/atmel_ssc_dai.h @@ -0,0 +1,121 @@ +/* + * atmel_ssc_dai.h - ALSA SSC interface for the Atmel SoC + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Author: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * ATMEL CORP. + * + * Based on at91-ssc.c by + * Frank Mandarino <fmandarino@endrelia.com> + * Based on pxa2xx Platform drivers by + * Liam Girdwood <liam.girdwood@wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ATMEL_SSC_DAI_H +#define _ATMEL_SSC_DAI_H + +#include <linux/types.h> +#include <linux/atmel-ssc.h> + +#include "atmel-pcm.h" + +/* SSC system clock ids */ +#define ATMEL_SYSCLK_MCK 0 /* SSC uses AT91 MCK as system clock */ + +/* SSC divider ids */ +#define ATMEL_SSC_CMR_DIV 0 /* MCK divider for BCLK */ +#define ATMEL_SSC_TCMR_PERIOD 1 /* BCLK divider for transmit FS */ +#define ATMEL_SSC_RCMR_PERIOD 2 /* BCLK divider for receive FS */ +/* + * SSC direction masks + */ +#define SSC_DIR_MASK_UNUSED 0 +#define SSC_DIR_MASK_PLAYBACK 1 +#define SSC_DIR_MASK_CAPTURE 2 + +/* + * SSC register values that Atmel left out of <linux/atmel-ssc.h>. These + * are expected to be used with SSC_BF + */ +/* START bit field values */ +#define SSC_START_CONTINUOUS 0 +#define SSC_START_TX_RX 1 +#define SSC_START_LOW_RF 2 +#define SSC_START_HIGH_RF 3 +#define SSC_START_FALLING_RF 4 +#define SSC_START_RISING_RF 5 +#define SSC_START_LEVEL_RF 6 +#define SSC_START_EDGE_RF 7 +#define SSS_START_COMPARE_0 8 + +/* CKI bit field values */ +#define SSC_CKI_FALLING 0 +#define SSC_CKI_RISING 1 + +/* CKO bit field values */ +#define SSC_CKO_NONE 0 +#define SSC_CKO_CONTINUOUS 1 +#define SSC_CKO_TRANSFER 2 + +/* CKS bit field values */ +#define SSC_CKS_DIV 0 +#define SSC_CKS_CLOCK 1 +#define SSC_CKS_PIN 2 + +/* FSEDGE bit field values */ +#define SSC_FSEDGE_POSITIVE 0 +#define SSC_FSEDGE_NEGATIVE 1 + +/* FSOS bit field values */ +#define SSC_FSOS_NONE 0 +#define SSC_FSOS_NEGATIVE 1 +#define SSC_FSOS_POSITIVE 2 +#define SSC_FSOS_LOW 3 +#define SSC_FSOS_HIGH 4 +#define SSC_FSOS_TOGGLE 5 + +#define START_DELAY 1 + +struct atmel_ssc_state { + u32 ssc_cmr; + u32 ssc_rcmr; + u32 ssc_rfmr; + u32 ssc_tcmr; + u32 ssc_tfmr; + u32 ssc_sr; + u32 ssc_imr; +}; + + +struct atmel_ssc_info { + char *name; + struct ssc_device *ssc; + spinlock_t lock; /* lock for dir_mask */ + unsigned short dir_mask; /* 0=unused, 1=playback, 2=capture */ + unsigned short initialized; /* true if SSC has been initialized */ + unsigned short daifmt; + unsigned short cmr_div; + unsigned short tcmr_period; + unsigned short rcmr_period; + struct atmel_pcm_dma_params *dma_params[2]; + struct atmel_ssc_state ssc_state; +}; +extern struct snd_soc_dai atmel_ssc_dai[]; + +#endif /* _AT91_SSC_DAI_H */ diff --git a/sound/soc/at32/playpaq_wm8510.c b/sound/soc/atmel/playpaq_wm8510.c index b1966e4dfcd3..5b07cf7ea4e7 100644 --- a/sound/soc/at32/playpaq_wm8510.c +++ b/sound/soc/atmel/playpaq_wm8510.c @@ -40,8 +40,8 @@ #include <mach/portmux.h> #include "../codecs/wm8510.h" -#include "at32-pcm.h" -#include "at32-ssc.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" /*-------------------------------------------------------------------------*\ diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c new file mode 100644 index 000000000000..4e191df4e2b7 --- /dev/null +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -0,0 +1,329 @@ +/* + * sam9g20_wm8731 -- SoC audio for AT91SAM9G20-based + * ATMEL AT91SAM9G20ek board. + * + * Copyright (C) 2005 SAN People + * Copyright (C) 2008 Atmel + * + * Authors: Sedji Gaouaou <sedji.gaouaou@atmel.com> + * + * Based on ati_b1_wm8731.c by: + * Frank Mandarino <fmandarino@endrelia.com> + * Copyright 2006 Endrelia Technologies Inc. + * Based on corgi.c by: + * Copyright 2005 Wolfson Microelectronics PLC. + * Copyright 2005 Openedhand Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> + +#include <linux/atmel-ssc.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <mach/hardware.h> +#include <mach/gpio.h> + +#include "../codecs/wm8731.h" +#include "atmel-pcm.h" +#include "atmel_ssc_dai.h" + + +static int at91sam9g20ek_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + int ret; + + /* codec system clock is supplied by PCK0, set to 12MHz */ + ret = snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, + 12000000, SND_SOC_CLOCK_IN); + if (ret < 0) + return ret; + + return 0; +} + +static void at91sam9g20ek_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream); + + dev_dbg(rtd->socdev->dev, "shutdown"); +} + +static int at91sam9g20ek_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct atmel_ssc_info *ssc_p = cpu_dai->private_data; + struct ssc_device *ssc = ssc_p->ssc; + int ret; + + unsigned int rate; + int cmr_div, period; + + if (ssc == NULL) { + printk(KERN_INFO "at91sam9g20ek_hw_params: ssc is NULL!\n"); + return -EINVAL; + } + + /* set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) + return ret; + + /* + * The SSC clock dividers depend on the sample rate. The CMR.DIV + * field divides the system master clock MCK to drive the SSC TK + * signal which provides the codec BCLK. The TCMR.PERIOD and + * RCMR.PERIOD fields further divide the BCLK signal to drive + * the SSC TF and RF signals which provide the codec DACLRC and + * ADCLRC clocks. + * + * The dividers were determined through trial and error, where a + * CMR.DIV value is chosen such that the resulting BCLK value is + * divisible, or almost divisible, by (2 * sample rate), and then + * the TCMR.PERIOD or RCMR.PERIOD is BCLK / (2 * sample rate) - 1. + */ + rate = params_rate(params); + + switch (rate) { + case 8000: + cmr_div = 55; /* BCLK = 133MHz/(2*55) = 1.209MHz */ + period = 74; /* LRC = BCLK/(2*(74+1)) ~= 8060,6Hz */ + break; + case 11025: + cmr_div = 67; /* BCLK = 133MHz/(2*60) = 1.108MHz */ + period = 45; /* LRC = BCLK/(2*(49+1)) = 11083,3Hz */ + break; + case 16000: + cmr_div = 63; /* BCLK = 133MHz/(2*63) = 1.055MHz */ + period = 32; /* LRC = BCLK/(2*(32+1)) = 15993,2Hz */ + break; + case 22050: + cmr_div = 52; /* BCLK = 133MHz/(2*52) = 1.278MHz */ + period = 28; /* LRC = BCLK/(2*(28+1)) = 22049Hz */ + break; + case 32000: + cmr_div = 66; /* BCLK = 133MHz/(2*66) = 1.007MHz */ + period = 15; /* LRC = BCLK/(2*(15+1)) = 31486,742Hz */ + break; + case 44100: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 25; /* LRC = BCLK/(2*(25+1)) = 44098Hz */ + break; + case 48000: + cmr_div = 33; /* BCLK = 133MHz/(2*33) = 2.015MHz */ + period = 20; /* LRC = BCLK/(2*(20+1)) = 47979,79Hz */ + break; + case 88200: + cmr_div = 29; /* BCLK = 133MHz/(2*29) = 2.293MHz */ + period = 12; /* LRC = BCLK/(2*(12+1)) = 88196Hz */ + break; + case 96000: + cmr_div = 23; /* BCLK = 133MHz/(2*23) = 2.891MHz */ + period = 14; /* LRC = BCLK/(2*(14+1)) = 96376Hz */ + break; + default: + printk(KERN_WARNING "unsupported rate %d" + " on at91sam9g20ek board\n", rate); + return -EINVAL; + } + + /* set the MCK divider for BCLK */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, ATMEL_SSC_CMR_DIV, cmr_div); + if (ret < 0) + return ret; + + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { + /* set the BCLK divider for DACLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_TCMR_PERIOD, period); + } else { + /* set the BCLK divider for ADCLRC */ + ret = snd_soc_dai_set_clkdiv(cpu_dai, + ATMEL_SSC_RCMR_PERIOD, period); + } + if (ret < 0) + return ret; + + return 0; +} + +static struct snd_soc_ops at91sam9g20ek_ops = { + .startup = at91sam9g20ek_startup, + .hw_params = at91sam9g20ek_hw_params, + .shutdown = at91sam9g20ek_shutdown, +}; + + +static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), +}; + +static const struct snd_soc_dapm_route intercon[] = { + + /* speaker connected to LHPOUT */ + {"Ext Spk", NULL, "LHPOUT"}, + + /* mic is connected to Mic Jack, with WM8731 Mic Bias */ + {"MICIN", NULL, "Mic Bias"}, + {"Mic Bias", NULL, "Int Mic"}, +}; + +/* + * Logic for a wm8731 as connected on a at91sam9g20ek board. + */ +static int at91sam9g20ek_wm8731_init(struct snd_soc_codec *codec) +{ + printk(KERN_DEBUG + "at91sam9g20ek_wm8731 " + ": at91sam9g20ek_wm8731_init() called\n"); + + /* Add specific widgets */ + snd_soc_dapm_new_controls(codec, at91sam9g20ek_dapm_widgets, + ARRAY_SIZE(at91sam9g20ek_dapm_widgets)); + /* Set up specific audio path interconnects */ + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + /* not connected */ + snd_soc_dapm_disable_pin(codec, "RLINEIN"); + snd_soc_dapm_disable_pin(codec, "LLINEIN"); + + /* always connected */ + snd_soc_dapm_enable_pin(codec, "Int Mic"); + snd_soc_dapm_enable_pin(codec, "Ext Spk"); + + snd_soc_dapm_sync(codec); + + return 0; +} + +static struct snd_soc_dai_link at91sam9g20ek_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .cpu_dai = &atmel_ssc_dai[0], + .codec_dai = &wm8731_dai, + .init = at91sam9g20ek_wm8731_init, + .ops = &at91sam9g20ek_ops, +}; + +static struct snd_soc_machine snd_soc_machine_at91sam9g20ek = { + .name = "WM8731", + .dai_link = &at91sam9g20ek_dai, + .num_links = 1, +}; + +static struct wm8731_setup_data at91sam9g20ek_wm8731_setup = { + .i2c_bus = 0, + .i2c_address = 0x1b, +}; + +static struct snd_soc_device at91sam9g20ek_snd_devdata = { + .machine = &snd_soc_machine_at91sam9g20ek, + .platform = &atmel_soc_platform, + .codec_dev = &soc_codec_dev_wm8731, + .codec_data = &at91sam9g20ek_wm8731_setup, +}; + +static struct platform_device *at91sam9g20ek_snd_device; + +static int __init at91sam9g20ek_init(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc = NULL; + int ret; + + /* + * Request SSC device + */ + ssc = ssc_request(0); + if (IS_ERR(ssc)) { + ret = PTR_ERR(ssc); + ssc = NULL; + goto err_ssc; + } + ssc_p->ssc = ssc; + + at91sam9g20ek_snd_device = platform_device_alloc("soc-audio", -1); + if (!at91sam9g20ek_snd_device) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + ret = -ENOMEM; + } + + platform_set_drvdata(at91sam9g20ek_snd_device, + &at91sam9g20ek_snd_devdata); + at91sam9g20ek_snd_devdata.dev = &at91sam9g20ek_snd_device->dev; + + ret = platform_device_add(at91sam9g20ek_snd_device); + if (ret) { + printk(KERN_DEBUG + "platform device allocation failed\n"); + platform_device_put(at91sam9g20ek_snd_device); + } + + return ret; + +err_ssc: + return ret; +} + +static void __exit at91sam9g20ek_exit(void) +{ + struct atmel_ssc_info *ssc_p = at91sam9g20ek_dai.cpu_dai->private_data; + struct ssc_device *ssc; + + if (ssc_p != NULL) { + ssc = ssc_p->ssc; + if (ssc != NULL) + ssc_free(ssc); + ssc_p->ssc = NULL; + } + + platform_device_unregister(at91sam9g20ek_snd_device); + at91sam9g20ek_snd_device = NULL; +} + +module_init(at91sam9g20ek_init); +module_exit(at91sam9g20ek_exit); + +/* Module information */ +MODULE_AUTHOR("Sedji Gaouaou <sedji.gaouaou@atmel.com>"); +MODULE_DESCRIPTION("ALSA SoC AT91SAM9G20EK_WM8731"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 38a0e3b620a7..b73c36aad677 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -1,31 +1,36 @@ config SND_SOC_ALL_CODECS tristate "Build all ASoC CODEC drivers" - depends on I2C - select SPI - select SPI_MASTER - select SND_SOC_AD73311 - select SND_SOC_AK4535 - select SND_SOC_CS4270 - select SND_SOC_SSM2602 - select SND_SOC_TLV320AIC23 - select SND_SOC_TLV320AIC26 - select SND_SOC_TLV320AIC3X - select SND_SOC_UDA1380 - select SND_SOC_WM8510 - select SND_SOC_WM8580 - select SND_SOC_WM8731 - select SND_SOC_WM8750 - select SND_SOC_WM8753 - select SND_SOC_WM8900 - select SND_SOC_WM8903 - select SND_SOC_WM8971 - select SND_SOC_WM8990 + select SND_SOC_AC97_CODEC if SND_SOC_AC97_BUS + select SND_SOC_AD1980 if SND_SOC_AC97_BUS + select SND_SOC_AD73311 if I2C + select SND_SOC_AK4535 if I2C + select SND_SOC_CS4270 if I2C + select SND_SOC_SSM2602 if I2C + select SND_SOC_TLV320AIC23 if I2C + select SND_SOC_TLV320AIC26 if SPI_MASTER + select SND_SOC_TLV320AIC3X if I2C + select SND_SOC_TWL4030 if TWL4030_CORE + select SND_SOC_UDA1380 if I2C + select SND_SOC_WM8510 if (I2C || SPI_MASTER) + select SND_SOC_WM8580 if I2C + select SND_SOC_WM8731 if (I2C || SPI_MASTER) + select SND_SOC_WM8750 if (I2C || SPI_MASTER) + select SND_SOC_WM8753 if (I2C || SPI_MASTER) + select SND_SOC_WM8900 if I2C + select SND_SOC_WM8903 if I2C + select SND_SOC_WM8971 if I2C + select SND_SOC_WM8990 if I2C + select SND_SOC_WM9712 if SND_SOC_AC97_BUS + select SND_SOC_WM9713 if SND_SOC_AC97_BUS help Normally ASoC codec drivers are only built if a machine driver which uses them is also built since they are only usable with a machine driver. Selecting this option will allow these drivers to be built without an explicit machine driver for test and development purposes. + Support for the bus types used to access the codecs to be built must + be selected separately. + If unsure select "N". @@ -75,6 +80,10 @@ config SND_SOC_TLV320AIC3X tristate depends on I2C +config SND_SOC_TWL4030 + tristate + depends on TWL4030_CORE + config SND_SOC_UDA1380 tristate diff --git a/sound/soc/codecs/Makefile b/sound/soc/codecs/Makefile index 90f0a585fc70..3b9b58a0ea7d 100644 --- a/sound/soc/codecs/Makefile +++ b/sound/soc/codecs/Makefile @@ -7,6 +7,7 @@ snd-soc-ssm2602-objs := ssm2602.o snd-soc-tlv320aic23-objs := tlv320aic23.o snd-soc-tlv320aic26-objs := tlv320aic26.o snd-soc-tlv320aic3x-objs := tlv320aic3x.o +snd-soc-twl4030-objs := twl4030.o snd-soc-uda1380-objs := uda1380.o snd-soc-wm8510-objs := wm8510.o snd-soc-wm8580-objs := wm8580.o @@ -29,6 +30,7 @@ obj-$(CONFIG_SND_SOC_SSM2602) += snd-soc-ssm2602.o obj-$(CONFIG_SND_SOC_TLV320AIC23) += snd-soc-tlv320aic23.o obj-$(CONFIG_SND_SOC_TLV320AIC26) += snd-soc-tlv320aic26.o obj-$(CONFIG_SND_SOC_TLV320AIC3X) += snd-soc-tlv320aic3x.o +obj-$(CONFIG_SND_SOC_TWL4030) += snd-soc-twl4030.o obj-$(CONFIG_SND_SOC_UDA1380) += snd-soc-uda1380.o obj-$(CONFIG_SND_SOC_WM8510) += snd-soc-wm8510.o obj-$(CONFIG_SND_SOC_WM8580) += snd-soc-wm8580.o diff --git a/sound/soc/codecs/cs4270.c b/sound/soc/codecs/cs4270.c index 0bbd94501d7e..0ff476d7057c 100644 --- a/sound/soc/codecs/cs4270.c +++ b/sound/soc/codecs/cs4270.c @@ -450,6 +450,19 @@ static int cs4270_hw_params(struct snd_pcm_substream *substream, return ret; } + /* Disable automatic volume control. It's enabled by default, and + * it causes volume change commands to be delayed, sometimes until + * after playback has started. + */ + + reg = cs4270_read_reg_cache(codec, CS4270_TRANS); + reg &= ~(CS4270_TRANS_SOFT | CS4270_TRANS_ZERO); + ret = cs4270_i2c_write(codec, CS4270_TRANS, reg); + if (ret < 0) { + printk(KERN_ERR "I2C write failed\n"); + return ret; + } + /* Thaw and power-up the codec */ ret = snd_soc_write(codec, CS4270_PWRCTL, 0); diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c new file mode 100644 index 000000000000..ee2f0d37765c --- /dev/null +++ b/sound/soc/codecs/twl4030.c @@ -0,0 +1,653 @@ +/* + * ALSA SoC TWL4030 codec driver + * + * Author: Steve Sakoman, <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/pm.h> +#include <linux/i2c.h> +#include <linux/platform_device.h> +#include <linux/i2c/twl4030.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> +#include <sound/initval.h> + +#include "twl4030.h" + +/* + * twl4030 register cache & default register settings + */ +static const u8 twl4030_reg[TWL4030_CACHEREGNUM] = { + 0x00, /* this register not used */ + 0x93, /* REG_CODEC_MODE (0x1) */ + 0xc3, /* REG_OPTION (0x2) */ + 0x00, /* REG_UNKNOWN (0x3) */ + 0x00, /* REG_MICBIAS_CTL (0x4) */ + 0x24, /* REG_ANAMICL (0x5) */ + 0x04, /* REG_ANAMICR (0x6) */ + 0x0a, /* REG_AVADC_CTL (0x7) */ + 0x00, /* REG_ADCMICSEL (0x8) */ + 0x00, /* REG_DIGMIXING (0x9) */ + 0x0c, /* REG_ATXL1PGA (0xA) */ + 0x0c, /* REG_ATXR1PGA (0xB) */ + 0x00, /* REG_AVTXL2PGA (0xC) */ + 0x00, /* REG_AVTXR2PGA (0xD) */ + 0x01, /* REG_AUDIO_IF (0xE) */ + 0x00, /* REG_VOICE_IF (0xF) */ + 0x00, /* REG_ARXR1PGA (0x10) */ + 0x00, /* REG_ARXL1PGA (0x11) */ + 0x6c, /* REG_ARXR2PGA (0x12) */ + 0x6c, /* REG_ARXL2PGA (0x13) */ + 0x00, /* REG_VRXPGA (0x14) */ + 0x00, /* REG_VSTPGA (0x15) */ + 0x00, /* REG_VRX2ARXPGA (0x16) */ + 0x0c, /* REG_AVDAC_CTL (0x17) */ + 0x00, /* REG_ARX2VTXPGA (0x18) */ + 0x00, /* REG_ARXL1_APGA_CTL (0x19) */ + 0x00, /* REG_ARXR1_APGA_CTL (0x1A) */ + 0x4b, /* REG_ARXL2_APGA_CTL (0x1B) */ + 0x4b, /* REG_ARXR2_APGA_CTL (0x1C) */ + 0x00, /* REG_ATX2ARXPGA (0x1D) */ + 0x00, /* REG_BT_IF (0x1E) */ + 0x00, /* REG_BTPGA (0x1F) */ + 0x00, /* REG_BTSTPGA (0x20) */ + 0x00, /* REG_EAR_CTL (0x21) */ + 0x24, /* REG_HS_SEL (0x22) */ + 0x0a, /* REG_HS_GAIN_SET (0x23) */ + 0x00, /* REG_HS_POPN_SET (0x24) */ + 0x00, /* REG_PREDL_CTL (0x25) */ + 0x00, /* REG_PREDR_CTL (0x26) */ + 0x00, /* REG_PRECKL_CTL (0x27) */ + 0x00, /* REG_PRECKR_CTL (0x28) */ + 0x00, /* REG_HFL_CTL (0x29) */ + 0x00, /* REG_HFR_CTL (0x2A) */ + 0x00, /* REG_ALC_CTL (0x2B) */ + 0x00, /* REG_ALC_SET1 (0x2C) */ + 0x00, /* REG_ALC_SET2 (0x2D) */ + 0x00, /* REG_BOOST_CTL (0x2E) */ + 0x01, /* REG_SOFTVOL_CTL (0x2F) */ + 0x00, /* REG_DTMF_FREQSEL (0x30) */ + 0x00, /* REG_DTMF_TONEXT1H (0x31) */ + 0x00, /* REG_DTMF_TONEXT1L (0x32) */ + 0x00, /* REG_DTMF_TONEXT2H (0x33) */ + 0x00, /* REG_DTMF_TONEXT2L (0x34) */ + 0x00, /* REG_DTMF_TONOFF (0x35) */ + 0x00, /* REG_DTMF_WANONOFF (0x36) */ + 0x00, /* REG_I2S_RX_SCRAMBLE_H (0x37) */ + 0x00, /* REG_I2S_RX_SCRAMBLE_M (0x38) */ + 0x00, /* REG_I2S_RX_SCRAMBLE_L (0x39) */ + 0x16, /* REG_APLL_CTL (0x3A) */ + 0x00, /* REG_DTMF_CTL (0x3B) */ + 0x00, /* REG_DTMF_PGA_CTL2 (0x3C) */ + 0x00, /* REG_DTMF_PGA_CTL1 (0x3D) */ + 0x00, /* REG_MISC_SET_1 (0x3E) */ + 0x00, /* REG_PCMBTMUX (0x3F) */ + 0x00, /* not used (0x40) */ + 0x00, /* not used (0x41) */ + 0x00, /* not used (0x42) */ + 0x00, /* REG_RX_PATH_SEL (0x43) */ + 0x00, /* REG_VDL_APGA_CTL (0x44) */ + 0x00, /* REG_VIBRA_CTL (0x45) */ + 0x00, /* REG_VIBRA_SET (0x46) */ + 0x00, /* REG_VIBRA_PWM_SET (0x47) */ + 0x00, /* REG_ANAMIC_GAIN (0x48) */ + 0x00, /* REG_MISC_SET_2 (0x49) */ +}; + +/* + * read twl4030 register cache + */ +static inline unsigned int twl4030_read_reg_cache(struct snd_soc_codec *codec, + unsigned int reg) +{ + u8 *cache = codec->reg_cache; + + return cache[reg]; +} + +/* + * write twl4030 register cache + */ +static inline void twl4030_write_reg_cache(struct snd_soc_codec *codec, + u8 reg, u8 value) +{ + u8 *cache = codec->reg_cache; + + if (reg >= TWL4030_CACHEREGNUM) + return; + cache[reg] = value; +} + +/* + * write to the twl4030 register space + */ +static int twl4030_write(struct snd_soc_codec *codec, + unsigned int reg, unsigned int value) +{ + twl4030_write_reg_cache(codec, reg, value); + return twl4030_i2c_write_u8(TWL4030_MODULE_AUDIO_VOICE, value, reg); +} + +static void twl4030_clear_codecpdz(struct snd_soc_codec *codec) +{ + u8 mode; + + mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE); + twl4030_write(codec, TWL4030_REG_CODEC_MODE, + mode & ~TWL4030_CODECPDZ); + + /* REVISIT: this delay is present in TI sample drivers */ + /* but there seems to be no TRM requirement for it */ + udelay(10); +} + +static void twl4030_set_codecpdz(struct snd_soc_codec *codec) +{ + u8 mode; + + mode = twl4030_read_reg_cache(codec, TWL4030_REG_CODEC_MODE); + twl4030_write(codec, TWL4030_REG_CODEC_MODE, + mode | TWL4030_CODECPDZ); + + /* REVISIT: this delay is present in TI sample drivers */ + /* but there seems to be no TRM requirement for it */ + udelay(10); +} + +static void twl4030_init_chip(struct snd_soc_codec *codec) +{ + int i; + + /* clear CODECPDZ prior to setting register defaults */ + twl4030_clear_codecpdz(codec); + + /* set all audio section registers to reasonable defaults */ + for (i = TWL4030_REG_OPTION; i <= TWL4030_REG_MISC_SET_2; i++) + twl4030_write(codec, i, twl4030_reg[i]); + +} + +static const struct snd_kcontrol_new twl4030_snd_controls[] = { + SOC_DOUBLE_R("Master Playback Volume", + TWL4030_REG_ARXL2PGA, TWL4030_REG_ARXR2PGA, + 0, 127, 0), + SOC_DOUBLE_R("Capture Volume", + TWL4030_REG_ATXL1PGA, TWL4030_REG_ATXR1PGA, + 0, 127, 0), +}; + +/* add non dapm controls */ +static int twl4030_add_controls(struct snd_soc_codec *codec) +{ + int err, i; + + for (i = 0; i < ARRAY_SIZE(twl4030_snd_controls); i++) { + err = snd_ctl_add(codec->card, + snd_soc_cnew(&twl4030_snd_controls[i], + codec, NULL)); + if (err < 0) + return err; + } + + return 0; +} + +static const struct snd_soc_dapm_widget twl4030_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("INL"), + SND_SOC_DAPM_INPUT("INR"), + + SND_SOC_DAPM_OUTPUT("OUTL"), + SND_SOC_DAPM_OUTPUT("OUTR"), + + SND_SOC_DAPM_DAC("DACL", "Left Playback", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_DAC("DACR", "Right Playback", SND_SOC_NOPM, 0, 0), + + SND_SOC_DAPM_ADC("ADCL", "Left Capture", SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_ADC("ADCR", "Right Capture", SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route intercon[] = { + /* outputs */ + {"OUTL", NULL, "DACL"}, + {"OUTR", NULL, "DACR"}, + + /* inputs */ + {"ADCL", NULL, "INL"}, + {"ADCR", NULL, "INR"}, +}; + +static int twl4030_add_widgets(struct snd_soc_codec *codec) +{ + snd_soc_dapm_new_controls(codec, twl4030_dapm_widgets, + ARRAY_SIZE(twl4030_dapm_widgets)); + + snd_soc_dapm_add_routes(codec, intercon, ARRAY_SIZE(intercon)); + + snd_soc_dapm_new_widgets(codec); + return 0; +} + +static void twl4030_power_up(struct snd_soc_codec *codec) +{ + u8 anamicl, regmisc1, byte, popn, hsgain; + int i = 0; + + /* set CODECPDZ to turn on codec */ + twl4030_set_codecpdz(codec); + + /* initiate offset cancellation */ + anamicl = twl4030_read_reg_cache(codec, TWL4030_REG_ANAMICL); + twl4030_write(codec, TWL4030_REG_ANAMICL, + anamicl | TWL4030_CNCL_OFFSET_START); + + /* wait for offset cancellation to complete */ + do { + /* this takes a little while, so don't slam i2c */ + udelay(2000); + twl4030_i2c_read_u8(TWL4030_MODULE_AUDIO_VOICE, &byte, + TWL4030_REG_ANAMICL); + } while ((i++ < 100) && + ((byte & TWL4030_CNCL_OFFSET_START) == + TWL4030_CNCL_OFFSET_START)); + + /* anti-pop when changing analog gain */ + regmisc1 = twl4030_read_reg_cache(codec, TWL4030_REG_MISC_SET_1); + twl4030_write(codec, TWL4030_REG_MISC_SET_1, + regmisc1 | TWL4030_SMOOTH_ANAVOL_EN); + + /* toggle CODECPDZ as per TRM */ + twl4030_clear_codecpdz(codec); + twl4030_set_codecpdz(codec); + + /* program anti-pop with bias ramp delay */ + popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET); + popn &= TWL4030_RAMP_DELAY; + popn |= TWL4030_RAMP_DELAY_645MS; + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); + popn |= TWL4030_VMID_EN; + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); + + /* enable output stage and gain setting */ + hsgain = TWL4030_HSR_GAIN_0DB | TWL4030_HSL_GAIN_0DB; + twl4030_write(codec, TWL4030_REG_HS_GAIN_SET, hsgain); + + /* enable anti-pop ramp */ + popn |= TWL4030_RAMP_EN; + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); +} + +static void twl4030_power_down(struct snd_soc_codec *codec) +{ + u8 popn, hsgain; + + /* disable anti-pop ramp */ + popn = twl4030_read_reg_cache(codec, TWL4030_REG_HS_POPN_SET); + popn &= ~TWL4030_RAMP_EN; + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); + + /* disable output stage and gain setting */ + hsgain = TWL4030_HSR_GAIN_PWR_DOWN | TWL4030_HSL_GAIN_PWR_DOWN; + twl4030_write(codec, TWL4030_REG_HS_GAIN_SET, hsgain); + + /* disable bias out */ + popn &= ~TWL4030_VMID_EN; + twl4030_write(codec, TWL4030_REG_HS_POPN_SET, popn); + + /* power down */ + twl4030_clear_codecpdz(codec); +} + +static int twl4030_set_bias_level(struct snd_soc_codec *codec, + enum snd_soc_bias_level level) +{ + switch (level) { + case SND_SOC_BIAS_ON: + twl4030_power_up(codec); + break; + case SND_SOC_BIAS_PREPARE: + /* TODO: develop a twl4030_prepare function */ + break; + case SND_SOC_BIAS_STANDBY: + /* TODO: develop a twl4030_standby function */ + twl4030_power_down(codec); + break; + case SND_SOC_BIAS_OFF: + twl4030_power_down(codec); + break; + } + codec->bias_level = level; + + return 0; +} + +static int twl4030_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_device *socdev = rtd->socdev; + struct snd_soc_codec *codec = socdev->codec; + u8 mode, old_mode, format, old_format; + + + /* bit rate */ + old_mode = twl4030_read_reg_cache(codec, + TWL4030_REG_CODEC_MODE) & ~TWL4030_CODECPDZ; + mode = old_mode & ~TWL4030_APLL_RATE; + + switch (params_rate(params)) { + case 8000: + mode |= TWL4030_APLL_RATE_8000; + break; + case 11025: + mode |= TWL4030_APLL_RATE_11025; + break; + case 12000: + mode |= TWL4030_APLL_RATE_12000; + break; + case 16000: + mode |= TWL4030_APLL_RATE_16000; + break; + case 22050: + mode |= TWL4030_APLL_RATE_22050; + break; + case 24000: + mode |= TWL4030_APLL_RATE_24000; + break; + case 32000: + mode |= TWL4030_APLL_RATE_32000; + break; + case 44100: + mode |= TWL4030_APLL_RATE_44100; + break; + case 48000: + mode |= TWL4030_APLL_RATE_48000; + break; + default: + printk(KERN_ERR "TWL4030 hw params: unknown rate %d\n", + params_rate(params)); + return -EINVAL; + } + + if (mode != old_mode) { + /* change rate and set CODECPDZ */ + twl4030_write(codec, TWL4030_REG_CODEC_MODE, mode); + twl4030_set_codecpdz(codec); + } + + /* sample size */ + old_format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF); + format = old_format; + format &= ~TWL4030_DATA_WIDTH; + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: + format |= TWL4030_DATA_WIDTH_16S_16W; + break; + case SNDRV_PCM_FORMAT_S24_LE: + format |= TWL4030_DATA_WIDTH_32S_24W; + break; + default: + printk(KERN_ERR "TWL4030 hw params: unknown format %d\n", + params_format(params)); + return -EINVAL; + } + + if (format != old_format) { + + /* clear CODECPDZ before changing format (codec requirement) */ + twl4030_clear_codecpdz(codec); + + /* change format */ + twl4030_write(codec, TWL4030_REG_AUDIO_IF, format); + + /* set CODECPDZ afterwards */ + twl4030_set_codecpdz(codec); + } + return 0; +} + +static int twl4030_set_dai_sysclk(struct snd_soc_dai *codec_dai, + int clk_id, unsigned int freq, int dir) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u8 infreq; + + switch (freq) { + case 19200000: + infreq = TWL4030_APLL_INFREQ_19200KHZ; + break; + case 26000000: + infreq = TWL4030_APLL_INFREQ_26000KHZ; + break; + case 38400000: + infreq = TWL4030_APLL_INFREQ_38400KHZ; + break; + default: + printk(KERN_ERR "TWL4030 set sysclk: unknown rate %d\n", + freq); + return -EINVAL; + } + + infreq |= TWL4030_APLL_EN; + twl4030_write(codec, TWL4030_REG_APLL_CTL, infreq); + + return 0; +} + +static int twl4030_set_dai_fmt(struct snd_soc_dai *codec_dai, + unsigned int fmt) +{ + struct snd_soc_codec *codec = codec_dai->codec; + u8 old_format, format; + + /* get format */ + old_format = twl4030_read_reg_cache(codec, TWL4030_REG_AUDIO_IF); + format = old_format; + + /* set master/slave audio interface */ + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + format &= ~(TWL4030_AIF_SLAVE_EN); + format |= TWL4030_CLK256FS_EN; + break; + case SND_SOC_DAIFMT_CBS_CFS: + format &= ~(TWL4030_CLK256FS_EN); + format |= TWL4030_AIF_SLAVE_EN; + break; + default: + return -EINVAL; + } + + /* interface format */ + format &= ~TWL4030_AIF_FORMAT; + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + format |= TWL4030_AIF_FORMAT_CODEC; + break; + default: + return -EINVAL; + } + + if (format != old_format) { + + /* clear CODECPDZ before changing format (codec requirement) */ + twl4030_clear_codecpdz(codec); + + /* change format */ + twl4030_write(codec, TWL4030_REG_AUDIO_IF, format); + + /* set CODECPDZ afterwards */ + twl4030_set_codecpdz(codec); + } + + return 0; +} + +#define TWL4030_RATES (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000) +#define TWL4030_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FORMAT_S24_LE) + +struct snd_soc_dai twl4030_dai = { + .name = "twl4030", + .playback = { + .stream_name = "Playback", + .channels_min = 2, + .channels_max = 2, + .rates = TWL4030_RATES, + .formats = TWL4030_FORMATS,}, + .capture = { + .stream_name = "Capture", + .channels_min = 2, + .channels_max = 2, + .rates = TWL4030_RATES, + .formats = TWL4030_FORMATS,}, + .ops = { + .hw_params = twl4030_hw_params, + }, + .dai_ops = { + .set_sysclk = twl4030_set_dai_sysclk, + .set_fmt = twl4030_set_dai_fmt, + } +}; +EXPORT_SYMBOL_GPL(twl4030_dai); + +static int twl4030_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + twl4030_set_bias_level(codec, SND_SOC_BIAS_OFF); + + return 0; +} + +static int twl4030_resume(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + twl4030_set_bias_level(codec, codec->suspend_bias_level); + return 0; +} + +/* + * initialize the driver + * register the mixer and dsp interfaces with the kernel + */ + +static int twl4030_init(struct snd_soc_device *socdev) +{ + struct snd_soc_codec *codec = socdev->codec; + int ret = 0; + + printk(KERN_INFO "TWL4030 Audio Codec init \n"); + + codec->name = "twl4030"; + codec->owner = THIS_MODULE; + codec->read = twl4030_read_reg_cache; + codec->write = twl4030_write; + codec->set_bias_level = twl4030_set_bias_level; + codec->dai = &twl4030_dai; + codec->num_dai = 1; + codec->reg_cache_size = sizeof(twl4030_reg); + codec->reg_cache = kmemdup(twl4030_reg, sizeof(twl4030_reg), + GFP_KERNEL); + if (codec->reg_cache == NULL) + return -ENOMEM; + + /* register pcms */ + ret = snd_soc_new_pcms(socdev, SNDRV_DEFAULT_IDX1, SNDRV_DEFAULT_STR1); + if (ret < 0) { + printk(KERN_ERR "twl4030: failed to create pcms\n"); + goto pcm_err; + } + + twl4030_init_chip(codec); + + /* power on device */ + twl4030_set_bias_level(codec, SND_SOC_BIAS_STANDBY); + + twl4030_add_controls(codec); + twl4030_add_widgets(codec); + + ret = snd_soc_register_card(socdev); + if (ret < 0) { + printk(KERN_ERR "twl4030: failed to register card\n"); + goto card_err; + } + + return ret; + +card_err: + snd_soc_free_pcms(socdev); + snd_soc_dapm_free(socdev); +pcm_err: + kfree(codec->reg_cache); + return ret; +} + +static struct snd_soc_device *twl4030_socdev; + +static int twl4030_probe(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec; + + codec = kzalloc(sizeof(struct snd_soc_codec), GFP_KERNEL); + if (codec == NULL) + return -ENOMEM; + + socdev->codec = codec; + mutex_init(&codec->mutex); + INIT_LIST_HEAD(&codec->dapm_widgets); + INIT_LIST_HEAD(&codec->dapm_paths); + + twl4030_socdev = socdev; + twl4030_init(socdev); + + return 0; +} + +static int twl4030_remove(struct platform_device *pdev) +{ + struct snd_soc_device *socdev = platform_get_drvdata(pdev); + struct snd_soc_codec *codec = socdev->codec; + + printk(KERN_INFO "TWL4030 Audio Codec remove\n"); + kfree(codec); + + return 0; +} + +struct snd_soc_codec_device soc_codec_dev_twl4030 = { + .probe = twl4030_probe, + .remove = twl4030_remove, + .suspend = twl4030_suspend, + .resume = twl4030_resume, +}; +EXPORT_SYMBOL_GPL(soc_codec_dev_twl4030); + +MODULE_DESCRIPTION("ASoC TWL4030 codec driver"); +MODULE_AUTHOR("Steve Sakoman"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/codecs/twl4030.h b/sound/soc/codecs/twl4030.h new file mode 100644 index 000000000000..09865d9f5203 --- /dev/null +++ b/sound/soc/codecs/twl4030.h @@ -0,0 +1,197 @@ +/* + * ALSA SoC TWL4030 codec driver + * + * Author: Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __TWL4030_AUDIO_H__ +#define __TWL4030_AUDIO_H__ + +#define TWL4030_REG_CODEC_MODE 0x1 +#define TWL4030_REG_OPTION 0x2 +#define TWL4030_REG_UNKNOWN 0x3 +#define TWL4030_REG_MICBIAS_CTL 0x4 +#define TWL4030_REG_ANAMICL 0x5 +#define TWL4030_REG_ANAMICR 0x6 +#define TWL4030_REG_AVADC_CTL 0x7 +#define TWL4030_REG_ADCMICSEL 0x8 +#define TWL4030_REG_DIGMIXING 0x9 +#define TWL4030_REG_ATXL1PGA 0xA +#define TWL4030_REG_ATXR1PGA 0xB +#define TWL4030_REG_AVTXL2PGA 0xC +#define TWL4030_REG_AVTXR2PGA 0xD +#define TWL4030_REG_AUDIO_IF 0xE +#define TWL4030_REG_VOICE_IF 0xF +#define TWL4030_REG_ARXR1PGA 0x10 +#define TWL4030_REG_ARXL1PGA 0x11 +#define TWL4030_REG_ARXR2PGA 0x12 +#define TWL4030_REG_ARXL2PGA 0x13 +#define TWL4030_REG_VRXPGA 0x14 +#define TWL4030_REG_VSTPGA 0x15 +#define TWL4030_REG_VRX2ARXPGA 0x16 +#define TWL4030_REG_AVDAC_CTL 0x17 +#define TWL4030_REG_ARX2VTXPGA 0x18 +#define TWL4030_REG_ARXL1_APGA_CTL 0x19 +#define TWL4030_REG_ARXR1_APGA_CTL 0x1A +#define TWL4030_REG_ARXL2_APGA_CTL 0x1B +#define TWL4030_REG_ARXR2_APGA_CTL 0x1C +#define TWL4030_REG_ATX2ARXPGA 0x1D +#define TWL4030_REG_BT_IF 0x1E +#define TWL4030_REG_BTPGA 0x1F +#define TWL4030_REG_BTSTPGA 0x20 +#define TWL4030_REG_EAR_CTL 0x21 +#define TWL4030_REG_HS_SEL 0x22 +#define TWL4030_REG_HS_GAIN_SET 0x23 +#define TWL4030_REG_HS_POPN_SET 0x24 +#define TWL4030_REG_PREDL_CTL 0x25 +#define TWL4030_REG_PREDR_CTL 0x26 +#define TWL4030_REG_PRECKL_CTL 0x27 +#define TWL4030_REG_PRECKR_CTL 0x28 +#define TWL4030_REG_HFL_CTL 0x29 +#define TWL4030_REG_HFR_CTL 0x2A +#define TWL4030_REG_ALC_CTL 0x2B +#define TWL4030_REG_ALC_SET1 0x2C +#define TWL4030_REG_ALC_SET2 0x2D +#define TWL4030_REG_BOOST_CTL 0x2E +#define TWL4030_REG_SOFTVOL_CTL 0x2F +#define TWL4030_REG_DTMF_FREQSEL 0x30 +#define TWL4030_REG_DTMF_TONEXT1H 0x31 +#define TWL4030_REG_DTMF_TONEXT1L 0x32 +#define TWL4030_REG_DTMF_TONEXT2H 0x33 +#define TWL4030_REG_DTMF_TONEXT2L 0x34 +#define TWL4030_REG_DTMF_TONOFF 0x35 +#define TWL4030_REG_DTMF_WANONOFF 0x36 +#define TWL4030_REG_I2S_RX_SCRAMBLE_H 0x37 +#define TWL4030_REG_I2S_RX_SCRAMBLE_M 0x38 +#define TWL4030_REG_I2S_RX_SCRAMBLE_L 0x39 +#define TWL4030_REG_APLL_CTL 0x3A +#define TWL4030_REG_DTMF_CTL 0x3B +#define TWL4030_REG_DTMF_PGA_CTL2 0x3C +#define TWL4030_REG_DTMF_PGA_CTL1 0x3D +#define TWL4030_REG_MISC_SET_1 0x3E +#define TWL4030_REG_PCMBTMUX 0x3F +#define TWL4030_REG_RX_PATH_SEL 0x43 +#define TWL4030_REG_VDL_APGA_CTL 0x44 +#define TWL4030_REG_VIBRA_CTL 0x45 +#define TWL4030_REG_VIBRA_SET 0x46 +#define TWL4030_REG_VIBRA_PWM_SET 0x47 +#define TWL4030_REG_ANAMIC_GAIN 0x48 +#define TWL4030_REG_MISC_SET_2 0x49 + +#define TWL4030_CACHEREGNUM (TWL4030_REG_MISC_SET_2 + 1) + +/* Bitfield Definitions */ + +/* TWL4030_CODEC_MODE (0x01) Fields */ + +#define TWL4030_APLL_RATE 0xF0 +#define TWL4030_APLL_RATE_8000 0x00 +#define TWL4030_APLL_RATE_11025 0x10 +#define TWL4030_APLL_RATE_12000 0x20 +#define TWL4030_APLL_RATE_16000 0x40 +#define TWL4030_APLL_RATE_22050 0x50 +#define TWL4030_APLL_RATE_24000 0x60 +#define TWL4030_APLL_RATE_32000 0x80 +#define TWL4030_APLL_RATE_44100 0x90 +#define TWL4030_APLL_RATE_48000 0xA0 +#define TWL4030_SEL_16K 0x04 +#define TWL4030_CODECPDZ 0x02 +#define TWL4030_OPT_MODE 0x01 + +/* ANAMICL (0x05) Fields */ +#define TWL4030_CNCL_OFFSET_START 0x80 +#define TWL4030_OFFSET_CNCL_SEL 0x60 +#define TWL4030_OFFSET_CNCL_SEL_ARX1 0x00 +#define TWL4030_OFFSET_CNCL_SEL_ARX2 0x20 +#define TWL4030_OFFSET_CNCL_SEL_VRX 0x40 +#define TWL4030_OFFSET_CNCL_SEL_ALL 0x60 +#define TWL4030_MICAMPL_EN 0x10 +#define TWL4030_CKMIC_EN 0x08 +#define TWL4030_AUXL_EN 0x04 +#define TWL4030_HSMIC_EN 0x02 +#define TWL4030_MAINMIC_EN 0x01 + +/* ANAMICR (0x06) Fields */ +#define TWL4030_MICAMPR_EN 0x10 +#define TWL4030_AUXR_EN 0x04 +#define TWL4030_SUBMIC_EN 0x01 + +/* AUDIO_IF (0x0E) Fields */ + +#define TWL4030_AIF_SLAVE_EN 0x80 +#define TWL4030_DATA_WIDTH 0x60 +#define TWL4030_DATA_WIDTH_16S_16W 0x00 +#define TWL4030_DATA_WIDTH_32S_16W 0x40 +#define TWL4030_DATA_WIDTH_32S_24W 0x60 +#define TWL4030_AIF_FORMAT 0x18 +#define TWL4030_AIF_FORMAT_CODEC 0x00 +#define TWL4030_AIF_FORMAT_LEFT 0x08 +#define TWL4030_AIF_FORMAT_RIGHT 0x10 +#define TWL4030_AIF_FORMAT_TDM 0x18 +#define TWL4030_AIF_TRI_EN 0x04 +#define TWL4030_CLK256FS_EN 0x02 +#define TWL4030_AIF_EN 0x01 + +/* HS_GAIN_SET (0x23) Fields */ + +#define TWL4030_HSR_GAIN 0x0C +#define TWL4030_HSR_GAIN_PWR_DOWN 0x00 +#define TWL4030_HSR_GAIN_PLUS_6DB 0x04 +#define TWL4030_HSR_GAIN_0DB 0x08 +#define TWL4030_HSR_GAIN_MINUS_6DB 0x0C +#define TWL4030_HSL_GAIN 0x03 +#define TWL4030_HSL_GAIN_PWR_DOWN 0x00 +#define TWL4030_HSL_GAIN_PLUS_6DB 0x01 +#define TWL4030_HSL_GAIN_0DB 0x02 +#define TWL4030_HSL_GAIN_MINUS_6DB 0x03 + +/* HS_POPN_SET (0x24) Fields */ + +#define TWL4030_VMID_EN 0x40 +#define TWL4030_EXTMUTE 0x20 +#define TWL4030_RAMP_DELAY 0x1C +#define TWL4030_RAMP_DELAY_20MS 0x00 +#define TWL4030_RAMP_DELAY_40MS 0x04 +#define TWL4030_RAMP_DELAY_81MS 0x08 +#define TWL4030_RAMP_DELAY_161MS 0x0C +#define TWL4030_RAMP_DELAY_323MS 0x10 +#define TWL4030_RAMP_DELAY_645MS 0x14 +#define TWL4030_RAMP_DELAY_1291MS 0x18 +#define TWL4030_RAMP_DELAY_2581MS 0x1C +#define TWL4030_RAMP_EN 0x02 + +/* APLL_CTL (0x3A) Fields */ + +#define TWL4030_APLL_EN 0x10 +#define TWL4030_APLL_INFREQ 0x0F +#define TWL4030_APLL_INFREQ_19200KHZ 0x05 +#define TWL4030_APLL_INFREQ_26000KHZ 0x06 +#define TWL4030_APLL_INFREQ_38400KHZ 0x0F + +/* REG_MISC_SET_1 (0x3E) Fields */ + +#define TWL4030_CLK64_EN 0x80 +#define TWL4030_SCRAMBLE_EN 0x40 +#define TWL4030_FMLOOP_EN 0x20 +#define TWL4030_SMOOTH_ANAVOL_EN 0x02 +#define TWL4030_DIGMIC_LR_SWAP_EN 0x01 + +extern struct snd_soc_dai twl4030_dai; +extern struct snd_soc_codec_device soc_codec_dev_twl4030; + +#endif /* End of __TWL4030_AUDIO_H__ */ diff --git a/sound/soc/codecs/wm8580.c b/sound/soc/codecs/wm8580.c index 627ebfb4209b..cbcd7c324ab9 100644 --- a/sound/soc/codecs/wm8580.c +++ b/sound/soc/codecs/wm8580.c @@ -900,85 +900,85 @@ static struct snd_soc_device *wm8580_socdev; * low = 0x1a * high = 0x1b */ -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver wm8580_i2c_driver; -static struct i2c_client client_template; - -static int wm8580_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int wm8580_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8580_socdev; - struct wm8580_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - dev_err(&i2c->dev, "failed to attach codec at addr %x\n", addr); - goto err; - } - ret = wm8580_init(socdev); - if (ret < 0) { + if (ret < 0) dev_err(&i2c->dev, "failed to initialise WM8580\n"); - goto err; - } - - return ret; - -err: - kfree(codec); - kfree(i2c); return ret; } -static int wm8580_i2c_detach(struct i2c_client *client) +static int wm8580_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int wm8580_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, wm8580_codec_probe); -} +static const struct i2c_device_id wm8580_i2c_id[] = { + { "wm8580", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8580_i2c_id); -/* corgi i2c codec control layer */ static struct i2c_driver wm8580_i2c_driver = { .driver = { .name = "WM8580 I2C Codec", .owner = THIS_MODULE, }, - .attach_adapter = wm8580_i2c_attach, - .detach_client = wm8580_i2c_detach, - .command = NULL, + .probe = wm8580_i2c_probe, + .remove = wm8580_i2c_remove, + .id_table = wm8580_i2c_id, }; -static struct i2c_client client_template = { - .name = "WM8580", - .driver = &wm8580_i2c_driver, -}; +static int wm8580_add_i2c_device(struct platform_device *pdev, + const struct wm8580_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8580_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8580", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8580_i2c_driver); + return -ENODEV; +} #endif static int wm8580_probe(struct platform_device *pdev) @@ -1011,11 +1011,8 @@ static int wm8580_probe(struct platform_device *pdev) #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; - ret = i2c_add_driver(&wm8580_i2c_driver); - if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + ret = wm8580_add_i2c_device(pdev, setup); } #else /* Add other interfaces here */ @@ -1034,6 +1031,7 @@ static int wm8580_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&wm8580_i2c_driver); #endif kfree(codec->private_data); diff --git a/sound/soc/codecs/wm8580.h b/sound/soc/codecs/wm8580.h index 589ddaba21d7..09e4422f6f2f 100644 --- a/sound/soc/codecs/wm8580.h +++ b/sound/soc/codecs/wm8580.h @@ -29,6 +29,7 @@ #define WM8580_CLKSRC_NONE 5 struct wm8580_setup_data { + int i2c_bus; unsigned short i2c_address; }; diff --git a/sound/soc/codecs/wm8900.c b/sound/soc/codecs/wm8900.c index 3b326c9b5586..de016f41e04c 100644 --- a/sound/soc/codecs/wm8900.c +++ b/sound/soc/codecs/wm8900.c @@ -1387,89 +1387,86 @@ static struct snd_soc_device *wm8900_socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) -static unsigned short normal_i2c[] = { 0, I2C_CLIENT_END }; - -/* Magic definition of all other variables and things */ -I2C_CLIENT_INSMOD; - -static struct i2c_driver wm8900_i2c_driver; -static struct i2c_client client_template; - /* If the i2c layer weren't so broken, we could pass this kind of data around */ -static int wm8900_codec_probe(struct i2c_adapter *adap, int addr, int kind) +static int wm8900_i2c_probe(struct i2c_client *i2c, + const struct i2c_device_id *id) { struct snd_soc_device *socdev = wm8900_socdev; - struct wm8900_setup_data *setup = socdev->codec_data; struct snd_soc_codec *codec = socdev->codec; - struct i2c_client *i2c; int ret; - if (addr != setup->i2c_address) - return -ENODEV; - - dev_err(&adap->dev, "Probe on %x\n", addr); - - client_template.adapter = adap; - client_template.addr = addr; - - i2c = kmemdup(&client_template, sizeof(client_template), GFP_KERNEL); - if (i2c == NULL) { - kfree(codec); - return -ENOMEM; - } i2c_set_clientdata(i2c, codec); codec->control_data = i2c; - ret = i2c_attach_client(i2c); - if (ret < 0) { - dev_err(&adap->dev, - "failed to attach codec at addr %x\n", addr); - goto err; - } - ret = wm8900_init(socdev); - if (ret < 0) { - dev_err(&adap->dev, "failed to initialise WM8900\n"); - goto err; - } - return ret; - -err: - kfree(codec); - kfree(i2c); + if (ret < 0) + dev_err(&i2c->dev, "failed to initialise WM8900\n"); return ret; } -static int wm8900_i2c_detach(struct i2c_client *client) +static int wm8900_i2c_remove(struct i2c_client *client) { struct snd_soc_codec *codec = i2c_get_clientdata(client); - i2c_detach_client(client); kfree(codec->reg_cache); - kfree(client); return 0; } -static int wm8900_i2c_attach(struct i2c_adapter *adap) -{ - return i2c_probe(adap, &addr_data, wm8900_codec_probe); -} +static const struct i2c_device_id wm8900_i2c_id[] = { + { "wm8900", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, wm8900_i2c_id); -/* corgi i2c codec control layer */ static struct i2c_driver wm8900_i2c_driver = { .driver = { .name = "WM8900 I2C codec", .owner = THIS_MODULE, }, - .attach_adapter = wm8900_i2c_attach, - .detach_client = wm8900_i2c_detach, - .command = NULL, + .probe = wm8900_i2c_probe, + .remove = wm8900_i2c_remove, + .id_table = wm8900_i2c_id, }; -static struct i2c_client client_template = { - .name = "WM8900", - .driver = &wm8900_i2c_driver, -}; +static int wm8900_add_i2c_device(struct platform_device *pdev, + const struct wm8900_setup_data *setup) +{ + struct i2c_board_info info; + struct i2c_adapter *adapter; + struct i2c_client *client; + int ret; + + ret = i2c_add_driver(&wm8900_i2c_driver); + if (ret != 0) { + dev_err(&pdev->dev, "can't add i2c driver\n"); + return ret; + } + + memset(&info, 0, sizeof(struct i2c_board_info)); + info.addr = setup->i2c_address; + strlcpy(info.type, "wm8900", I2C_NAME_SIZE); + + adapter = i2c_get_adapter(setup->i2c_bus); + if (!adapter) { + dev_err(&pdev->dev, "can't get i2c adapter %d\n", + setup->i2c_bus); + goto err_driver; + } + + client = i2c_new_device(adapter, &info); + i2c_put_adapter(adapter); + if (!client) { + dev_err(&pdev->dev, "can't add i2c device at 0x%x\n", + (unsigned int)info.addr); + goto err_driver; + } + + return 0; + +err_driver: + i2c_del_driver(&wm8900_i2c_driver); + return -ENODEV; +} #endif static int wm8900_probe(struct platform_device *pdev) @@ -1497,11 +1494,8 @@ static int wm8900_probe(struct platform_device *pdev) wm8900_socdev = socdev; #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) if (setup->i2c_address) { - normal_i2c[0] = setup->i2c_address; codec->hw_write = (hw_write_t)i2c_master_send; - ret = i2c_add_driver(&wm8900_i2c_driver); - if (ret != 0) - printk(KERN_ERR "can't add i2c driver"); + ret = wm8900_add_i2c_device(pdev, setup); } #else #error Non-I2C interfaces not yet supported @@ -1521,6 +1515,7 @@ static int wm8900_remove(struct platform_device *pdev) snd_soc_free_pcms(socdev); snd_soc_dapm_free(socdev); #if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE) + i2c_unregister_device(codec->control_data); i2c_del_driver(&wm8900_i2c_driver); #endif kfree(codec); diff --git a/sound/soc/codecs/wm8900.h b/sound/soc/codecs/wm8900.h index ba450d99e902..2249a446ad37 100644 --- a/sound/soc/codecs/wm8900.h +++ b/sound/soc/codecs/wm8900.h @@ -55,6 +55,7 @@ #define WM8900_ struct wm8900_setup_data { + int i2c_bus; unsigned short i2c_address; }; diff --git a/sound/soc/codecs/wm9713.c b/sound/soc/codecs/wm9713.c index 945b32ed9884..740bf3cde18d 100644 --- a/sound/soc/codecs/wm9713.c +++ b/sound/soc/codecs/wm9713.c @@ -1097,6 +1097,8 @@ int wm9713_reset(struct snd_soc_codec *codec, int try_warm) } soc_ac97_ops.reset(codec->ac97); + if (soc_ac97_ops.warm_reset) + soc_ac97_ops.warm_reset(codec->ac97); if (ac97_read(codec, 0) != wm9713_reg[0]) return -EIO; return 0; diff --git a/sound/soc/omap/Kconfig b/sound/soc/omap/Kconfig index 8b7766b998d7..cf40e42954af 100644 --- a/sound/soc/omap/Kconfig +++ b/sound/soc/omap/Kconfig @@ -21,3 +21,13 @@ config SND_OMAP_SOC_OSK5912 select SND_SOC_TLV320AIC23 help Say Y if you want to add support for SoC audio on osk5912. + +config SND_OMAP_SOC_OVERO + tristate "SoC Audio support for Gumstix Overo" + depends on SND_OMAP_SOC && MACH_OVERO + select SND_OMAP_SOC_MCBSP + select SND_SOC_TWL4030 + help + Say Y if you want to add support for SoC audio on the Gumstix Overo. + + diff --git a/sound/soc/omap/Makefile b/sound/soc/omap/Makefile index e09d1f297f64..fefc9bed053a 100644 --- a/sound/soc/omap/Makefile +++ b/sound/soc/omap/Makefile @@ -8,6 +8,9 @@ obj-$(CONFIG_SND_OMAP_SOC_MCBSP) += snd-soc-omap-mcbsp.o # OMAP Machine Support snd-soc-n810-objs := n810.o snd-soc-osk5912-objs := osk5912.o +snd-soc-overo-objs := overo.o obj-$(CONFIG_SND_OMAP_SOC_N810) += snd-soc-n810.o obj-$(CONFIG_SND_OMAP_SOC_OSK5912) += snd-soc-osk5912.o +obj-$(CONFIG_SND_OMAP_SOC_OVERO) += snd-soc-overo.o + diff --git a/sound/soc/omap/omap3beagle.c b/sound/soc/omap/omap3beagle.c new file mode 100644 index 000000000000..ec84a9bbc563 --- /dev/null +++ b/sound/soc/omap/omap3beagle.c @@ -0,0 +1,149 @@ +/* + * omap3beagle.c -- SoC audio for OMAP3 Beagle + * + * Author: Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <mach/gpio.h> +#include <mach/mcbsp.h> + +#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/twl4030.h" + +static int omap3beagle_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret; + + /* Set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) { + printk(KERN_ERR "can't set codec DAI configuration\n"); + return ret; + } + + /* Set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) { + printk(KERN_ERR "can't set cpu DAI configuration\n"); + return ret; + } + + /* Set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, + SND_SOC_CLOCK_IN); + if (ret < 0) { + printk(KERN_ERR "can't set codec system clock\n"); + return ret; + } + + return 0; +} + +static struct snd_soc_ops omap3beagle_ops = { + .hw_params = omap3beagle_hw_params, +}; + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link omap3beagle_dai = { + .name = "TWL4030", + .stream_name = "TWL4030", + .cpu_dai = &omap_mcbsp_dai[0], + .codec_dai = &twl4030_dai, + .ops = &omap3beagle_ops, +}; + +/* Audio machine driver */ +static struct snd_soc_machine snd_soc_machine_omap3beagle = { + .name = "omap3beagle", + .dai_link = &omap3beagle_dai, + .num_links = 1, +}; + +/* Audio subsystem */ +static struct snd_soc_device omap3beagle_snd_devdata = { + .machine = &snd_soc_machine_omap3beagle, + .platform = &omap_soc_platform, + .codec_dev = &soc_codec_dev_twl4030, +}; + +static struct platform_device *omap3beagle_snd_device; + +static int __init omap3beagle_soc_init(void) +{ + int ret; + + if (!machine_is_omap3_beagle()) { + pr_debug("Not OMAP3 Beagle!\n"); + return -ENODEV; + } + pr_info("OMAP3 Beagle SoC init\n"); + + omap3beagle_snd_device = platform_device_alloc("soc-audio", -1); + if (!omap3beagle_snd_device) { + printk(KERN_ERR "Platform device allocation failed\n"); + return -ENOMEM; + } + + platform_set_drvdata(omap3beagle_snd_device, &omap3beagle_snd_devdata); + omap3beagle_snd_devdata.dev = &omap3beagle_snd_device->dev; + *(unsigned int *)omap3beagle_dai.cpu_dai->private_data = 1; /* McBSP2 */ + + ret = platform_device_add(omap3beagle_snd_device); + if (ret) + goto err1; + + return 0; + +err1: + printk(KERN_ERR "Unable to add platform device\n"); + platform_device_put(omap3beagle_snd_device); + + return ret; +} + +static void __exit omap3beagle_soc_exit(void) +{ + platform_device_unregister(omap3beagle_snd_device); +} + +module_init(omap3beagle_soc_init); +module_exit(omap3beagle_soc_exit); + +MODULE_AUTHOR("Steve Sakoman <steve@sakoman.com>"); +MODULE_DESCRIPTION("ALSA SoC OMAP3 Beagle"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/omap/overo.c b/sound/soc/omap/overo.c new file mode 100644 index 000000000000..c26d1de7da51 --- /dev/null +++ b/sound/soc/omap/overo.c @@ -0,0 +1,148 @@ +/* + * overo.c -- SoC audio for Gumstix Overo + * + * Author: Steve Sakoman <steve@sakoman.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/clk.h> +#include <linux/platform_device.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/soc-dapm.h> + +#include <asm/mach-types.h> +#include <mach/hardware.h> +#include <mach/gpio.h> +#include <mach/mcbsp.h> + +#include "omap-mcbsp.h" +#include "omap-pcm.h" +#include "../codecs/twl4030.h" + +static int overo_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret; + + /* Set codec DAI configuration */ + ret = snd_soc_dai_set_fmt(codec_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) { + printk(KERN_ERR "can't set codec DAI configuration\n"); + return ret; + } + + /* Set cpu DAI configuration */ + ret = snd_soc_dai_set_fmt(cpu_dai, + SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | + SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) { + printk(KERN_ERR "can't set cpu DAI configuration\n"); + return ret; + } + + /* Set the codec system clock for DAC and ADC */ + ret = snd_soc_dai_set_sysclk(codec_dai, 0, 26000000, + SND_SOC_CLOCK_IN); + if (ret < 0) { + printk(KERN_ERR "can't set codec system clock\n"); + return ret; + } + + return 0; +} + +static struct snd_soc_ops overo_ops = { + .hw_params = overo_hw_params, +}; + +/* Digital audio interface glue - connects codec <--> CPU */ +static struct snd_soc_dai_link overo_dai = { + .name = "TWL4030", + .stream_name = "TWL4030", + .cpu_dai = &omap_mcbsp_dai[0], + .codec_dai = &twl4030_dai, + .ops = &overo_ops, +}; + +/* Audio machine driver */ +static struct snd_soc_machine snd_soc_machine_overo = { + .name = "overo", + .dai_link = &overo_dai, + .num_links = 1, +}; + +/* Audio subsystem */ +static struct snd_soc_device overo_snd_devdata = { + .machine = &snd_soc_machine_overo, + .platform = &omap_soc_platform, + .codec_dev = &soc_codec_dev_twl4030, +}; + +static struct platform_device *overo_snd_device; + +static int __init overo_soc_init(void) +{ + int ret; + + if (!machine_is_overo()) { + pr_debug("Not Overo!\n"); + return -ENODEV; + } + printk(KERN_INFO "overo SoC init\n"); + + overo_snd_device = platform_device_alloc("soc-audio", -1); + if (!overo_snd_device) { + printk(KERN_ERR "Platform device allocation failed\n"); + return -ENOMEM; + } + + platform_set_drvdata(overo_snd_device, &overo_snd_devdata); + overo_snd_devdata.dev = &overo_snd_device->dev; + *(unsigned int *)overo_dai.cpu_dai->private_data = 1; /* McBSP2 */ + + ret = platform_device_add(overo_snd_device); + if (ret) + goto err1; + + return 0; + +err1: + printk(KERN_ERR "Unable to add platform device\n"); + platform_device_put(overo_snd_device); + + return ret; +} +module_init(overo_soc_init); + +static void __exit overo_soc_exit(void) +{ + platform_device_unregister(overo_snd_device); +} +module_exit(overo_soc_exit); + +MODULE_AUTHOR("Steve Sakoman <steve@sakoman.com>"); +MODULE_DESCRIPTION("ALSA SoC overo"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/pxa/Kconfig b/sound/soc/pxa/Kconfig index f8c1cdd940ac..4235524238f9 100644 --- a/sound/soc/pxa/Kconfig +++ b/sound/soc/pxa/Kconfig @@ -21,6 +21,9 @@ config SND_PXA2XX_SOC_AC97 config SND_PXA2XX_SOC_I2S tristate +config SND_PXA_SOC_SSP + tristate + config SND_PXA2XX_SOC_CORGI tristate "SoC Audio support for Sharp Zaurus SL-C7x0" depends on SND_PXA2XX_SOC && PXA_SHARP_C7xx @@ -75,3 +78,13 @@ config SND_PXA2XX_SOC_EM_X270 help Say Y if you want to add support for SoC audio on CompuLab EM-x270. + +config SND_SOC_ZYLONITE + tristate "SoC Audio support for Marvell Zylonite" + depends on SND_PXA2XX_SOC && MACH_ZYLONITE + select SND_PXA2XX_SOC_AC97 + select SND_PXA_SOC_SSP + select SND_SOC_WM9713 + help + Say Y if you want to add support for SoC audio on the + Marvell Zylonite reference platform. diff --git a/sound/soc/pxa/Makefile b/sound/soc/pxa/Makefile index 5bc8edf9dca9..00258abb84a8 100644 --- a/sound/soc/pxa/Makefile +++ b/sound/soc/pxa/Makefile @@ -2,10 +2,12 @@ snd-soc-pxa2xx-objs := pxa2xx-pcm.o snd-soc-pxa2xx-ac97-objs := pxa2xx-ac97.o snd-soc-pxa2xx-i2s-objs := pxa2xx-i2s.o +snd-soc-pxa-ssp-objs := pxa-ssp.o obj-$(CONFIG_SND_PXA2XX_SOC) += snd-soc-pxa2xx.o obj-$(CONFIG_SND_PXA2XX_SOC_AC97) += snd-soc-pxa2xx-ac97.o obj-$(CONFIG_SND_PXA2XX_SOC_I2S) += snd-soc-pxa2xx-i2s.o +obj-$(CONFIG_SND_PXA_SOC_SSP) += snd-soc-pxa-ssp.o # PXA Machine Support snd-soc-corgi-objs := corgi.o diff --git a/sound/soc/pxa/pxa-ssp.c b/sound/soc/pxa/pxa-ssp.c new file mode 100644 index 000000000000..e2b54b88c380 --- /dev/null +++ b/sound/soc/pxa/pxa-ssp.c @@ -0,0 +1,929 @@ +#define DEBUG +/* + * pxa-ssp.c -- ALSA Soc Audio Layer + * + * Copyright 2005,2008 Wolfson Microelectronics PLC. + * Author: Liam Girdwood + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * TODO: + * o Test network mode for > 16bit sample size + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/initval.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/pxa2xx-lib.h> + +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/regs-ssp.h> +#include <mach/audio.h> +#include <mach/ssp.h> + +#include "pxa2xx-pcm.h" +#include "pxa-ssp.h" + +/* + * SSP audio private data + */ +struct ssp_priv { + struct ssp_dev dev; + unsigned int sysclk; + int dai_fmt; +#ifdef CONFIG_PM + struct ssp_state state; +#endif +}; + +#define PXA2xx_SSP1_BASE 0x41000000 +#define PXA27x_SSP2_BASE 0x41700000 +#define PXA27x_SSP3_BASE 0x41900000 +#define PXA3xx_SSP4_BASE 0x41a00000 + +static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = { + .name = "SSP1 PCM Mono out", + .dev_addr = PXA2xx_SSP1_BASE + SSDR, + .drcmr = &DRCMR(14), + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = { + .name = "SSP1 PCM Mono in", + .dev_addr = PXA2xx_SSP1_BASE + SSDR, + .drcmr = &DRCMR(13), + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = { + .name = "SSP1 PCM Stereo out", + .dev_addr = PXA2xx_SSP1_BASE + SSDR, + .drcmr = &DRCMR(14), + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = { + .name = "SSP1 PCM Stereo in", + .dev_addr = PXA2xx_SSP1_BASE + SSDR, + .drcmr = &DRCMR(13), + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = { + .name = "SSP2 PCM Mono out", + .dev_addr = PXA27x_SSP2_BASE + SSDR, + .drcmr = &DRCMR(16), + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = { + .name = "SSP2 PCM Mono in", + .dev_addr = PXA27x_SSP2_BASE + SSDR, + .drcmr = &DRCMR(15), + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = { + .name = "SSP2 PCM Stereo out", + .dev_addr = PXA27x_SSP2_BASE + SSDR, + .drcmr = &DRCMR(16), + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = { + .name = "SSP2 PCM Stereo in", + .dev_addr = PXA27x_SSP2_BASE + SSDR, + .drcmr = &DRCMR(15), + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = { + .name = "SSP3 PCM Mono out", + .dev_addr = PXA27x_SSP3_BASE + SSDR, + .drcmr = &DRCMR(67), + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = { + .name = "SSP3 PCM Mono in", + .dev_addr = PXA27x_SSP3_BASE + SSDR, + .drcmr = &DRCMR(66), + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = { + .name = "SSP3 PCM Stereo out", + .dev_addr = PXA27x_SSP3_BASE + SSDR, + .drcmr = &DRCMR(67), + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = { + .name = "SSP3 PCM Stereo in", + .dev_addr = PXA27x_SSP3_BASE + SSDR, + .drcmr = &DRCMR(66), + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = { + .name = "SSP4 PCM Mono out", + .dev_addr = PXA3xx_SSP4_BASE + SSDR, + .drcmr = &DRCMR(67), + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = { + .name = "SSP4 PCM Mono in", + .dev_addr = PXA3xx_SSP4_BASE + SSDR, + .drcmr = &DRCMR(66), + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH2, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = { + .name = "SSP4 PCM Stereo out", + .dev_addr = PXA3xx_SSP4_BASE + SSDR, + .drcmr = &DRCMR(67), + .dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG | + DCMD_BURST16 | DCMD_WIDTH4, +}; + +static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = { + .name = "SSP4 PCM Stereo in", + .dev_addr = PXA3xx_SSP4_BASE + SSDR, + .drcmr = &DRCMR(66), + .dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC | + DCMD_BURST16 | DCMD_WIDTH4, +}; + +static void dump_registers(struct ssp_device *ssp) +{ + dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n", + ssp_read_reg(ssp, SSCR0), ssp_read_reg(ssp, SSCR1), + ssp_read_reg(ssp, SSTO)); + + dev_dbg(&ssp->pdev->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n", + ssp_read_reg(ssp, SSPSP), ssp_read_reg(ssp, SSSR), + ssp_read_reg(ssp, SSACD)); +} + +static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = { + { + &pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in, + &pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in, + }, + { + &pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in, + &pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in, + }, + { + &pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in, + &pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in, + }, + { + &pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in, + &pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in, + }, +}; + +static int pxa_ssp_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct ssp_priv *priv = cpu_dai->private_data; + int ret = 0; + + if (!cpu_dai->active) { + ret = ssp_init(&priv->dev, cpu_dai->id + 1, SSP_NO_IRQ); + if (ret < 0) + return ret; + ssp_disable(&priv->dev); + } + return ret; +} + +static void pxa_ssp_shutdown(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct ssp_priv *priv = cpu_dai->private_data; + + if (!cpu_dai->active) { + ssp_disable(&priv->dev); + ssp_exit(&priv->dev); + } +} + +#ifdef CONFIG_PM + +static int pxa_ssp_suspend(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = cpu_dai->private_data; + + if (!cpu_dai->active) + return 0; + + ssp_save_state(&priv->dev, &priv->state); + clk_disable(priv->dev.ssp->clk); + return 0; +} + +static int pxa_ssp_resume(struct platform_device *pdev, + struct snd_soc_dai *cpu_dai) +{ + struct ssp_priv *priv = cpu_dai->private_data; + + if (!cpu_dai->active) + return 0; + + clk_enable(priv->dev.ssp->clk); + ssp_restore_state(&priv->dev, &priv->state); + ssp_enable(&priv->dev); + + return 0; +} + +#else +#define pxa_ssp_suspend NULL +#define pxa_ssp_resume NULL +#endif + +/** + * ssp_set_clkdiv - set SSP clock divider + * @div: serial clock rate divider + */ +static void ssp_set_scr(struct ssp_dev *dev, u32 div) +{ + struct ssp_device *ssp = dev->ssp; + u32 sscr0 = ssp_read_reg(dev->ssp, SSCR0) & ~SSCR0_SCR; + + ssp_write_reg(ssp, SSCR0, (sscr0 | SSCR0_SerClkDiv(div))); +} + +/* + * Set the SSP ports SYSCLK. + */ +static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai, + int clk_id, unsigned int freq, int dir) +{ + struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->dev.ssp; + int val; + + u32 sscr0 = ssp_read_reg(ssp, SSCR0) & + ~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ADC); + + dev_dbg(&ssp->pdev->dev, + "pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %d\n", + cpu_dai->id, clk_id, freq); + + switch (clk_id) { + case PXA_SSP_CLK_NET_PLL: + sscr0 |= SSCR0_MOD; + break; + case PXA_SSP_CLK_PLL: + /* Internal PLL is fixed */ + if (cpu_is_pxa25x()) + priv->sysclk = 1843200; + else + priv->sysclk = 13000000; + break; + case PXA_SSP_CLK_EXT: + priv->sysclk = freq; + sscr0 |= SSCR0_ECS; + break; + case PXA_SSP_CLK_NET: + priv->sysclk = freq; + sscr0 |= SSCR0_NCS | SSCR0_MOD; + break; + case PXA_SSP_CLK_AUDIO: + priv->sysclk = 0; + ssp_set_scr(&priv->dev, 1); + sscr0 |= SSCR0_ADC; + break; + default: + return -ENODEV; + } + + /* The SSP clock must be disabled when changing SSP clock mode + * on PXA2xx. On PXA3xx it must be enabled when doing so. */ + if (!cpu_is_pxa3xx()) + clk_disable(priv->dev.ssp->clk); + val = ssp_read_reg(ssp, SSCR0) | sscr0; + ssp_write_reg(ssp, SSCR0, val); + if (!cpu_is_pxa3xx()) + clk_enable(priv->dev.ssp->clk); + + return 0; +} + +/* + * Set the SSP clock dividers. + */ +static int pxa_ssp_set_dai_clkdiv(struct snd_soc_dai *cpu_dai, + int div_id, int div) +{ + struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->dev.ssp; + int val; + + switch (div_id) { + case PXA_SSP_AUDIO_DIV_ACDS: + val = (ssp_read_reg(ssp, SSACD) & ~0x7) | SSACD_ACDS(div); + ssp_write_reg(ssp, SSACD, val); + break; + case PXA_SSP_AUDIO_DIV_SCDB: + val = ssp_read_reg(ssp, SSACD); + val &= ~SSACD_SCDB; +#if defined(CONFIG_PXA3xx) + if (cpu_is_pxa3xx()) + val &= ~SSACD_SCDX8; +#endif + switch (div) { + case PXA_SSP_CLK_SCDB_1: + val |= SSACD_SCDB; + break; + case PXA_SSP_CLK_SCDB_4: + break; +#if defined(CONFIG_PXA3xx) + case PXA_SSP_CLK_SCDB_8: + if (cpu_is_pxa3xx()) + val |= SSACD_SCDX8; + else + return -EINVAL; + break; +#endif + default: + return -EINVAL; + } + ssp_write_reg(ssp, SSACD, val); + break; + case PXA_SSP_DIV_SCR: + ssp_set_scr(&priv->dev, div); + break; + default: + return -ENODEV; + } + + return 0; +} + +/* + * Configure the PLL frequency pxa27x and (afaik - pxa320 only) + */ +static int pxa_ssp_set_dai_pll(struct snd_soc_dai *cpu_dai, + int pll_id, unsigned int freq_in, unsigned int freq_out) +{ + struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->dev.ssp; + u32 ssacd = ssp_read_reg(ssp, SSACD) & ~0x70; + +#if defined(CONFIG_PXA3xx) + if (cpu_is_pxa3xx()) + ssp_write_reg(ssp, SSACDD, 0); +#endif + + switch (freq_out) { + case 5622000: + break; + case 11345000: + ssacd |= (0x1 << 4); + break; + case 12235000: + ssacd |= (0x2 << 4); + break; + case 14857000: + ssacd |= (0x3 << 4); + break; + case 32842000: + ssacd |= (0x4 << 4); + break; + case 48000000: + ssacd |= (0x5 << 4); + break; + case 0: + /* Disable */ + break; + + default: +#ifdef CONFIG_PXA3xx + /* PXA3xx has a clock ditherer which can be used to generate + * a wider range of frequencies - calculate a value for it. + */ + if (cpu_is_pxa3xx()) { + u32 val; + u64 tmp = 19968; + tmp *= 1000000; + do_div(tmp, freq_out); + val = tmp; + + val = (val << 16) | 64;; + ssp_write_reg(ssp, SSACDD, val); + + ssacd |= (0x6 << 4); + + dev_dbg(&ssp->pdev->dev, + "Using SSACDD %x to supply %dHz\n", + val, freq_out); + break; + } +#endif + + return -EINVAL; + } + + ssp_write_reg(ssp, SSACD, ssacd); + + return 0; +} + +/* + * Set the active slots in TDM/Network mode + */ +static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai, + unsigned int mask, int slots) +{ + struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->dev.ssp; + u32 sscr0; + + sscr0 = ssp_read_reg(ssp, SSCR0) & ~SSCR0_SlotsPerFrm(7); + + /* set number of active slots */ + sscr0 |= SSCR0_SlotsPerFrm(slots); + ssp_write_reg(ssp, SSCR0, sscr0); + + /* set active slot mask */ + ssp_write_reg(ssp, SSTSA, mask); + ssp_write_reg(ssp, SSRSA, mask); + return 0; +} + +/* + * Tristate the SSP DAI lines + */ +static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai, + int tristate) +{ + struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->dev.ssp; + u32 sscr1; + + sscr1 = ssp_read_reg(ssp, SSCR1); + if (tristate) + sscr1 &= ~SSCR1_TTE; + else + sscr1 |= SSCR1_TTE; + ssp_write_reg(ssp, SSCR1, sscr1); + + return 0; +} + +/* + * Set up the SSP DAI format. + * The SSP Port must be inactive before calling this function as the + * physical interface format is changed. + */ +static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai, + unsigned int fmt) +{ + struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->dev.ssp; + u32 sscr0; + u32 sscr1; + u32 sspsp; + + /* reset port settings */ + sscr0 = ssp_read_reg(ssp, SSCR0) & + (SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ADC); + sscr1 = SSCR1_RxTresh(8) | SSCR1_TxTresh(7); + sspsp = 0; + + switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { + case SND_SOC_DAIFMT_CBM_CFM: + sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR; + break; + case SND_SOC_DAIFMT_CBM_CFS: + sscr1 |= SSCR1_SCLKDIR; + break; + case SND_SOC_DAIFMT_CBS_CFS: + break; + default: + return -EINVAL; + } + + ssp_write_reg(ssp, SSCR0, sscr0); + ssp_write_reg(ssp, SSCR1, sscr1); + ssp_write_reg(ssp, SSPSP, sspsp); + + switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + sscr0 |= SSCR0_MOD | SSCR0_PSP; + sscr1 |= SSCR1_RWOT | SSCR1_TRAIL; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + sspsp |= SSPSP_FSRT; + break; + case SND_SOC_DAIFMT_NB_IF: + sspsp |= SSPSP_SFRMP | SSPSP_FSRT; + break; + case SND_SOC_DAIFMT_IB_IF: + sspsp |= SSPSP_SFRMP; + break; + default: + return -EINVAL; + } + break; + + case SND_SOC_DAIFMT_DSP_A: + sspsp |= SSPSP_FSRT; + case SND_SOC_DAIFMT_DSP_B: + sscr0 |= SSCR0_MOD | SSCR0_PSP; + sscr1 |= SSCR1_TRAIL | SSCR1_RWOT; + + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + sspsp |= SSPSP_SFRMP; + break; + case SND_SOC_DAIFMT_IB_IF: + break; + default: + return -EINVAL; + } + break; + + default: + return -EINVAL; + } + + ssp_write_reg(ssp, SSCR0, sscr0); + ssp_write_reg(ssp, SSCR1, sscr1); + ssp_write_reg(ssp, SSPSP, sspsp); + + dump_registers(ssp); + + /* Since we are configuring the timings for the format by hand + * we have to defer some things until hw_params() where we + * know parameters like the sample size. + */ + priv->dai_fmt = fmt; + + return 0; +} + +/* + * Set the SSP audio DMA parameters and sample size. + * Can be called multiple times by oss emulation. + */ +static int pxa_ssp_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->dev.ssp; + int dma = 0, chn = params_channels(params); + u32 sscr0; + u32 sspsp; + int width = snd_pcm_format_physical_width(params_format(params)); + + /* select correct DMA params */ + if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK) + dma = 1; /* capture DMA offset is 1,3 */ + if (chn == 2) + dma += 2; /* stereo DMA offset is 2, mono is 0 */ + cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma]; + + dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma); + + /* we can only change the settings if the port is not in use */ + if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE) + return 0; + + /* clear selected SSP bits */ + sscr0 = ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS); + ssp_write_reg(ssp, SSCR0, sscr0); + + /* bit size */ + sscr0 = ssp_read_reg(ssp, SSCR0); + switch (params_format(params)) { + case SNDRV_PCM_FORMAT_S16_LE: +#ifdef CONFIG_PXA3xx + if (cpu_is_pxa3xx()) + sscr0 |= SSCR0_FPCKE; +#endif + sscr0 |= SSCR0_DataSize(16); + if (params_channels(params) > 1) + sscr0 |= SSCR0_EDSS; + break; + case SNDRV_PCM_FORMAT_S24_LE: + sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8)); + /* we must be in network mode (2 slots) for 24 bit stereo */ + break; + case SNDRV_PCM_FORMAT_S32_LE: + sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16)); + /* we must be in network mode (2 slots) for 32 bit stereo */ + break; + } + ssp_write_reg(ssp, SSCR0, sscr0); + + switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) { + case SND_SOC_DAIFMT_I2S: + /* Cleared when the DAI format is set */ + sspsp = ssp_read_reg(ssp, SSPSP) | SSPSP_SFRMWDTH(width); + ssp_write_reg(ssp, SSPSP, sspsp); + break; + default: + break; + } + + /* We always use a network mode so we always require TDM slots + * - complain loudly and fail if they've not been set up yet. + */ + if (!(ssp_read_reg(ssp, SSTSA) & 0xf)) { + dev_err(&ssp->pdev->dev, "No TDM timeslot configured\n"); + return -EINVAL; + } + + dump_registers(ssp); + + return 0; +} + +static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret = 0; + struct ssp_priv *priv = cpu_dai->private_data; + struct ssp_device *ssp = priv->dev.ssp; + int val; + + switch (cmd) { + case SNDRV_PCM_TRIGGER_RESUME: + ssp_enable(&priv->dev); + break; + case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: + val = ssp_read_reg(ssp, SSCR1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + val |= SSCR1_TSRE; + else + val |= SSCR1_RSRE; + ssp_write_reg(ssp, SSCR1, val); + val = ssp_read_reg(ssp, SSSR); + ssp_write_reg(ssp, SSSR, val); + break; + case SNDRV_PCM_TRIGGER_START: + val = ssp_read_reg(ssp, SSCR1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + val |= SSCR1_TSRE; + else + val |= SSCR1_RSRE; + ssp_write_reg(ssp, SSCR1, val); + ssp_enable(&priv->dev); + break; + case SNDRV_PCM_TRIGGER_STOP: + val = ssp_read_reg(ssp, SSCR1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + val &= ~SSCR1_TSRE; + else + val &= ~SSCR1_RSRE; + ssp_write_reg(ssp, SSCR1, val); + break; + case SNDRV_PCM_TRIGGER_SUSPEND: + ssp_disable(&priv->dev); + break; + case SNDRV_PCM_TRIGGER_PAUSE_PUSH: + val = ssp_read_reg(ssp, SSCR1); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + val &= ~SSCR1_TSRE; + else + val &= ~SSCR1_RSRE; + ssp_write_reg(ssp, SSCR1, val); + break; + + default: + ret = -EINVAL; + } + + dump_registers(ssp); + + return ret; +} + +static int pxa_ssp_probe(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct ssp_priv *priv; + int ret; + + priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->dev.ssp = ssp_request(dai->id, "SoC audio"); + if (priv->dev.ssp == NULL) { + ret = -ENODEV; + goto err_priv; + } + + dai->private_data = priv; + + return 0; + +err_priv: + kfree(priv); + return ret; +} + +static void pxa_ssp_remove(struct platform_device *pdev, + struct snd_soc_dai *dai) +{ + struct ssp_priv *priv = dai->private_data; + ssp_free(priv->dev.ssp); +} + +#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\ + SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \ + SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | \ + SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000) + +#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\ + SNDRV_PCM_FMTBIT_S24_LE | \ + SNDRV_PCM_FMTBIT_S32_LE) + +struct snd_soc_dai pxa_ssp_dai[] = { + { + .name = "pxa2xx-ssp1", + .id = 0, + .type = SND_SOC_DAI_PCM, + .probe = pxa_ssp_probe, + .remove = pxa_ssp_remove, + .suspend = pxa_ssp_suspend, + .resume = pxa_ssp_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .ops = { + .startup = pxa_ssp_startup, + .shutdown = pxa_ssp_shutdown, + .trigger = pxa_ssp_trigger, + .hw_params = pxa_ssp_hw_params, + }, + .dai_ops = { + .set_sysclk = pxa_ssp_set_dai_sysclk, + .set_clkdiv = pxa_ssp_set_dai_clkdiv, + .set_pll = pxa_ssp_set_dai_pll, + .set_fmt = pxa_ssp_set_dai_fmt, + .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, + .set_tristate = pxa_ssp_set_dai_tristate, + }, + }, + { .name = "pxa2xx-ssp2", + .id = 1, + .type = SND_SOC_DAI_PCM, + .probe = pxa_ssp_probe, + .remove = pxa_ssp_remove, + .suspend = pxa_ssp_suspend, + .resume = pxa_ssp_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .ops = { + .startup = pxa_ssp_startup, + .shutdown = pxa_ssp_shutdown, + .trigger = pxa_ssp_trigger, + .hw_params = pxa_ssp_hw_params, + }, + .dai_ops = { + .set_sysclk = pxa_ssp_set_dai_sysclk, + .set_clkdiv = pxa_ssp_set_dai_clkdiv, + .set_pll = pxa_ssp_set_dai_pll, + .set_fmt = pxa_ssp_set_dai_fmt, + .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, + .set_tristate = pxa_ssp_set_dai_tristate, + }, + }, + { + .name = "pxa2xx-ssp3", + .id = 2, + .type = SND_SOC_DAI_PCM, + .probe = pxa_ssp_probe, + .remove = pxa_ssp_remove, + .suspend = pxa_ssp_suspend, + .resume = pxa_ssp_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .ops = { + .startup = pxa_ssp_startup, + .shutdown = pxa_ssp_shutdown, + .trigger = pxa_ssp_trigger, + .hw_params = pxa_ssp_hw_params, + }, + .dai_ops = { + .set_sysclk = pxa_ssp_set_dai_sysclk, + .set_clkdiv = pxa_ssp_set_dai_clkdiv, + .set_pll = pxa_ssp_set_dai_pll, + .set_fmt = pxa_ssp_set_dai_fmt, + .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, + .set_tristate = pxa_ssp_set_dai_tristate, + }, + }, + { + .name = "pxa2xx-ssp4", + .id = 3, + .type = SND_SOC_DAI_PCM, + .probe = pxa_ssp_probe, + .remove = pxa_ssp_remove, + .suspend = pxa_ssp_suspend, + .resume = pxa_ssp_resume, + .playback = { + .channels_min = 1, + .channels_max = 2, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .capture = { + .channels_min = 1, + .channels_max = 2, + .rates = PXA_SSP_RATES, + .formats = PXA_SSP_FORMATS, + }, + .ops = { + .startup = pxa_ssp_startup, + .shutdown = pxa_ssp_shutdown, + .trigger = pxa_ssp_trigger, + .hw_params = pxa_ssp_hw_params, + }, + .dai_ops = { + .set_sysclk = pxa_ssp_set_dai_sysclk, + .set_clkdiv = pxa_ssp_set_dai_clkdiv, + .set_pll = pxa_ssp_set_dai_pll, + .set_fmt = pxa_ssp_set_dai_fmt, + .set_tdm_slot = pxa_ssp_set_dai_tdm_slot, + .set_tristate = pxa_ssp_set_dai_tristate, + }, + }, +}; +EXPORT_SYMBOL_GPL(pxa_ssp_dai); + +/* Module information */ +MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>"); +MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface"); +MODULE_LICENSE("GPL"); diff --git a/sound/soc/pxa/pxa-ssp.h b/sound/soc/pxa/pxa-ssp.h new file mode 100644 index 000000000000..91deadd55675 --- /dev/null +++ b/sound/soc/pxa/pxa-ssp.h @@ -0,0 +1,47 @@ +/* + * ASoC PXA SSP port support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PXA_SSP_H +#define _PXA_SSP_H + +/* pxa DAI SSP IDs */ +#define PXA_DAI_SSP1 0 +#define PXA_DAI_SSP2 1 +#define PXA_DAI_SSP3 2 +#define PXA_DAI_SSP4 3 + +/* SSP clock sources */ +#define PXA_SSP_CLK_PLL 0 +#define PXA_SSP_CLK_EXT 1 +#define PXA_SSP_CLK_NET 2 +#define PXA_SSP_CLK_AUDIO 3 +#define PXA_SSP_CLK_NET_PLL 4 + +/* SSP audio dividers */ +#define PXA_SSP_AUDIO_DIV_ACDS 0 +#define PXA_SSP_AUDIO_DIV_SCDB 1 +#define PXA_SSP_DIV_SCR 2 + +/* SSP ACDS audio dividers values */ +#define PXA_SSP_CLK_AUDIO_DIV_1 0 +#define PXA_SSP_CLK_AUDIO_DIV_2 1 +#define PXA_SSP_CLK_AUDIO_DIV_4 2 +#define PXA_SSP_CLK_AUDIO_DIV_8 3 +#define PXA_SSP_CLK_AUDIO_DIV_16 4 +#define PXA_SSP_CLK_AUDIO_DIV_32 5 + +/* SSP divider bypass */ +#define PXA_SSP_CLK_SCDB_4 0 +#define PXA_SSP_CLK_SCDB_1 1 +#define PXA_SSP_CLK_SCDB_8 2 + +#define PXA_SSP_PLL_OUT 0 + +extern struct snd_soc_dai pxa_ssp_dai[4]; + +#endif diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index a3adbf06b1e5..1a173682965a 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -26,6 +26,7 @@ #include <linux/delay.h> #include <linux/pm.h> #include <linux/bitops.h> +#include <linux/debugfs.h> #include <linux/platform_device.h> #include <sound/core.h> #include <sound/pcm.h> @@ -34,14 +35,6 @@ #include <sound/soc-dapm.h> #include <sound/initval.h> -/* debug */ -#define SOC_DEBUG 0 -#if SOC_DEBUG -#define dbg(format, arg...) printk(format, ## arg) -#else -#define dbg(format, arg...) -#endif - static DEFINE_MUTEX(pcm_mutex); static DEFINE_MUTEX(io_mutex); static DECLARE_WAIT_QUEUE_HEAD(soc_pm_waitq); @@ -228,12 +221,12 @@ static int soc_pcm_open(struct snd_pcm_substream *substream) goto machine_err; } - dbg("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name); - dbg("asoc: rate mask 0x%x\n", runtime->hw.rates); - dbg("asoc: min ch %d max ch %d\n", runtime->hw.channels_min, - runtime->hw.channels_max); - dbg("asoc: min rate %d max rate %d\n", runtime->hw.rate_min, - runtime->hw.rate_max); + pr_debug("asoc: %s <-> %s info:\n", codec_dai->name, cpu_dai->name); + pr_debug("asoc: rate mask 0x%x\n", runtime->hw.rates); + pr_debug("asoc: min ch %d max ch %d\n", runtime->hw.channels_min, + runtime->hw.channels_max); + pr_debug("asoc: min rate %d max rate %d\n", runtime->hw.rate_min, + runtime->hw.rate_max); if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) cpu_dai->playback.active = codec_dai->playback.active = 1; @@ -278,18 +271,18 @@ static void close_delayed_work(struct work_struct *work) for (i = 0; i < codec->num_dai; i++) { codec_dai = &codec->dai[i]; - dbg("pop wq checking: %s status: %s waiting: %s\n", - codec_dai->playback.stream_name, - codec_dai->playback.active ? "active" : "inactive", - codec_dai->pop_wait ? "yes" : "no"); + pr_debug("pop wq checking: %s status: %s waiting: %s\n", + codec_dai->playback.stream_name, + codec_dai->playback.active ? "active" : "inactive", + codec_dai->pop_wait ? "yes" : "no"); /* are we waiting on this codec DAI stream */ if (codec_dai->pop_wait == 1) { /* Reduce power if no longer active */ if (codec->active == 0) { - dbg("pop wq D1 %s %s\n", codec->name, - codec_dai->playback.stream_name); + pr_debug("pop wq D1 %s %s\n", codec->name, + codec_dai->playback.stream_name); snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_PREPARE); } @@ -301,8 +294,8 @@ static void close_delayed_work(struct work_struct *work) /* Fall into standby if no longer active */ if (codec->active == 0) { - dbg("pop wq D3 %s %s\n", codec->name, - codec_dai->playback.stream_name); + pr_debug("pop wq D3 %s %s\n", codec->name, + codec_dai->playback.stream_name); snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_STANDBY); } @@ -428,51 +421,42 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) } } - /* we only want to start a DAPM playback stream if we are not waiting - * on an existing one stopping */ - if (codec_dai->pop_wait) { - /* we are waiting for the delayed work to start */ - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - snd_soc_dapm_stream_event(socdev->codec, - codec_dai->capture.stream_name, - SND_SOC_DAPM_STREAM_START); - else { - codec_dai->pop_wait = 0; - cancel_delayed_work(&socdev->delayed_work); - snd_soc_dai_digital_mute(codec_dai, 0); - } - } else { - /* no delayed work - do we need to power up codec */ - if (codec->bias_level != SND_SOC_BIAS_ON) { + /* cancel any delayed stream shutdown that is pending */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && + codec_dai->pop_wait) { + codec_dai->pop_wait = 0; + cancel_delayed_work(&socdev->delayed_work); + } - snd_soc_dapm_set_bias_level(socdev, - SND_SOC_BIAS_PREPARE); + /* do we need to power up codec */ + if (codec->bias_level != SND_SOC_BIAS_ON) { + snd_soc_dapm_set_bias_level(socdev, + SND_SOC_BIAS_PREPARE); - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - snd_soc_dapm_stream_event(codec, + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + snd_soc_dapm_stream_event(codec, codec_dai->playback.stream_name, SND_SOC_DAPM_STREAM_START); - else - snd_soc_dapm_stream_event(codec, + else + snd_soc_dapm_stream_event(codec, codec_dai->capture.stream_name, SND_SOC_DAPM_STREAM_START); - snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON); - snd_soc_dai_digital_mute(codec_dai, 0); + snd_soc_dapm_set_bias_level(socdev, SND_SOC_BIAS_ON); + snd_soc_dai_digital_mute(codec_dai, 0); - } else { - /* codec already powered - power on widgets */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) - snd_soc_dapm_stream_event(codec, + } else { + /* codec already powered - power on widgets */ + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + snd_soc_dapm_stream_event(codec, codec_dai->playback.stream_name, SND_SOC_DAPM_STREAM_START); - else - snd_soc_dapm_stream_event(codec, + else + snd_soc_dapm_stream_event(codec, codec_dai->capture.stream_name, SND_SOC_DAPM_STREAM_START); - snd_soc_dai_digital_mute(codec_dai, 0); - } + snd_soc_dai_digital_mute(codec_dai, 0); } out: @@ -961,10 +945,8 @@ static int soc_new_pcm(struct snd_soc_device *socdev, } /* codec register dump */ -static ssize_t codec_reg_show(struct device *dev, - struct device_attribute *attr, char *buf) +static ssize_t soc_codec_reg_show(struct snd_soc_device *devdata, char *buf) { - struct snd_soc_device *devdata = dev_get_drvdata(dev); struct snd_soc_codec *codec = devdata->codec; int i, step = 1, count = 0; @@ -1001,8 +983,117 @@ static ssize_t codec_reg_show(struct device *dev, return count; } +static ssize_t codec_reg_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct snd_soc_device *devdata = dev_get_drvdata(dev); + return soc_codec_reg_show(devdata, buf); +} + static DEVICE_ATTR(codec_reg, 0444, codec_reg_show, NULL); +#ifdef CONFIG_DEBUG_FS +static int codec_reg_open_file(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + return 0; +} + +static ssize_t codec_reg_read_file(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + ssize_t ret; + struct snd_soc_device *devdata = file->private_data; + char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + ret = soc_codec_reg_show(devdata, buf); + if (ret >= 0) + ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret); + kfree(buf); + return ret; +} + +static ssize_t codec_reg_write_file(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + char buf[32]; + int buf_size; + char *start = buf; + unsigned long reg, value; + int step = 1; + struct snd_soc_device *devdata = file->private_data; + struct snd_soc_codec *codec = devdata->codec; + + buf_size = min(count, (sizeof(buf)-1)); + if (copy_from_user(buf, user_buf, buf_size)) + return -EFAULT; + buf[buf_size] = 0; + + if (codec->reg_cache_step) + step = codec->reg_cache_step; + + while (*start == ' ') + start++; + reg = simple_strtoul(start, &start, 16); + if ((reg >= codec->reg_cache_size) || (reg % step)) + return -EINVAL; + while (*start == ' ') + start++; + if (strict_strtoul(start, 16, &value)) + return -EINVAL; + codec->write(codec, reg, value); + return buf_size; +} + +static const struct file_operations codec_reg_fops = { + .open = codec_reg_open_file, + .read = codec_reg_read_file, + .write = codec_reg_write_file, +}; + +static void soc_init_debugfs(struct snd_soc_device *socdev) +{ + struct dentry *root, *file; + struct snd_soc_codec *codec = socdev->codec; + root = debugfs_create_dir(dev_name(socdev->dev), NULL); + if (IS_ERR(root) || !root) + goto exit1; + + file = debugfs_create_file("codec_reg", 0644, + root, socdev, &codec_reg_fops); + if (!file) + goto exit2; + + file = debugfs_create_u32("dapm_pop_time", 0744, + root, &codec->pop_time); + if (!file) + goto exit2; + socdev->debugfs_root = root; + return; +exit2: + debugfs_remove_recursive(root); +exit1: + dev_err(socdev->dev, "debugfs is not available\n"); +} + +static void soc_cleanup_debugfs(struct snd_soc_device *socdev) +{ + debugfs_remove_recursive(socdev->debugfs_root); + socdev->debugfs_root = NULL; +} + +#else + +static inline void soc_init_debugfs(struct snd_soc_device *socdev) +{ +} + +static inline void soc_cleanup_debugfs(struct snd_soc_device *socdev) +{ +} +#endif + /** * snd_soc_new_ac97_codec - initailise AC97 device * @codec: audio codec @@ -1216,6 +1307,7 @@ int snd_soc_register_card(struct snd_soc_device *socdev) if (err < 0) printk(KERN_WARNING "asoc: failed to add codec sysfs files\n"); + soc_init_debugfs(socdev); mutex_unlock(&codec->mutex); out: @@ -1239,6 +1331,7 @@ void snd_soc_free_pcms(struct snd_soc_device *socdev) #endif mutex_lock(&codec->mutex); + soc_cleanup_debugfs(socdev); #ifdef CONFIG_SND_SOC_AC97_BUS for (i = 0; i < codec->num_dai; i++) { codec_dai = &codec->dai[i]; diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7351db9606e4..7bf3c4094592 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -37,7 +37,6 @@ #include <linux/bitops.h> #include <linux/platform_device.h> #include <linux/jiffies.h> -#include <linux/debugfs.h> #include <sound/core.h> #include <sound/pcm.h> #include <sound/pcm_params.h> @@ -67,17 +66,13 @@ static int dapm_status = 1; module_param(dapm_status, int, 0); MODULE_PARM_DESC(dapm_status, "enable DPM sysfs entries"); -static struct dentry *asoc_debugfs; - -static u32 pop_time; - -static void pop_wait(void) +static void pop_wait(u32 pop_time) { if (pop_time) schedule_timeout_uninterruptible(msecs_to_jiffies(pop_time)); } -static void pop_dbg(const char *fmt, ...) +static void pop_dbg(u32 pop_time, const char *fmt, ...) { va_list args; @@ -85,7 +80,7 @@ static void pop_dbg(const char *fmt, ...) if (pop_time) { vprintk(fmt, args); - pop_wait(); + pop_wait(pop_time); } va_end(args); @@ -230,10 +225,11 @@ static int dapm_update_bits(struct snd_soc_dapm_widget *widget) change = old != new; if (change) { - pop_dbg("pop test %s : %s in %d ms\n", widget->name, - widget->power ? "on" : "off", pop_time); + pop_dbg(codec->pop_time, "pop test %s : %s in %d ms\n", + widget->name, widget->power ? "on" : "off", + codec->pop_time); snd_soc_write(codec, widget->reg, new); - pop_wait(); + pop_wait(codec->pop_time); } pr_debug("reg %x old %x new %x change %d\n", widget->reg, old, new, change); @@ -293,7 +289,7 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, struct snd_soc_dapm_widget *w) { int i, ret = 0; - char name[32]; + size_t name_len; struct snd_soc_dapm_path *path; /* add kcontrol */ @@ -307,11 +303,16 @@ static int dapm_new_mixer(struct snd_soc_codec *codec, continue; /* add dapm control with long name */ - snprintf(name, 32, "%s %s", w->name, w->kcontrols[i].name); - path->long_name = kstrdup (name, GFP_KERNEL); + name_len = 2 + strlen(w->name) + + strlen(w->kcontrols[i].name); + path->long_name = kmalloc(name_len, GFP_KERNEL); if (path->long_name == NULL) return -ENOMEM; + snprintf(path->long_name, name_len, "%s %s", + w->name, w->kcontrols[i].name); + path->long_name[name_len - 1] = '\0'; + path->kcontrol = snd_soc_cnew(&w->kcontrols[i], w, path->long_name); ret = snd_ctl_add(codec->card, path->kcontrol); @@ -821,7 +822,7 @@ static DEVICE_ATTR(dapm_widget, 0444, dapm_widget_show, NULL); int snd_soc_dapm_sys_add(struct device *dev) { - int ret = 0; + int ret; if (!dapm_status) return 0; @@ -829,15 +830,7 @@ int snd_soc_dapm_sys_add(struct device *dev) ret = device_create_file(dev, &dev_attr_dapm_widget); if (ret != 0) return ret; - - asoc_debugfs = debugfs_create_dir("asoc", NULL); - if (!IS_ERR(asoc_debugfs) && asoc_debugfs) - debugfs_create_u32("dapm_pop_time", 0744, asoc_debugfs, - &pop_time); - else - asoc_debugfs = NULL; - - return 0; + return device_create_file(dev, &dev_attr_dapm_widget); } static void snd_soc_dapm_sys_remove(struct device *dev) @@ -845,9 +838,6 @@ static void snd_soc_dapm_sys_remove(struct device *dev) if (dapm_status) { device_remove_file(dev, &dev_attr_dapm_widget); } - - if (asoc_debugfs) - debugfs_remove_recursive(asoc_debugfs); } /* free all dapm widgets and resources */ @@ -1007,28 +997,6 @@ err: } /** - * snd_soc_dapm_connect_input - connect dapm widgets - * @codec: audio codec - * @sink: name of target widget - * @control: mixer control name - * @source: name of source name - * - * Connects 2 dapm widgets together via a named audio path. The sink is - * the widget receiving the audio signal, whilst the source is the sender - * of the audio signal. - * - * This function has been deprecated in favour of snd_soc_dapm_add_routes(). - * - * Returns 0 for success else error. - */ -int snd_soc_dapm_connect_input(struct snd_soc_codec *codec, const char *sink, - const char *control, const char *source) -{ - return snd_soc_dapm_add_route(codec, sink, control, source); -} -EXPORT_SYMBOL_GPL(snd_soc_dapm_connect_input); - -/** * snd_soc_dapm_add_routes - Add routes between DAPM widgets * @codec: codec * @route: audio routes |