diff options
| -rw-r--r-- | drivers/char/rio/riowinif.h | 1329 |
1 files changed, 0 insertions, 1329 deletions
diff --git a/drivers/char/rio/riowinif.h b/drivers/char/rio/riowinif.h deleted file mode 100644 index f802d7593b80..000000000000 --- a/drivers/char/rio/riowinif.h +++ /dev/null @@ -1,1329 +0,0 @@ -/************************************************************************/ -/* */ -/* Title : RIO Shared Memory Window Inteface */ -/* */ -/* Author : N.P.Vassallo */ -/* */ -/* Creation : 7th June 1999 */ -/* */ -/* Version : 1.0.0 */ -/* */ -/* Copyright : (c) Specialix International Ltd. 1999 * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * */ -/* Description : Prototypes, structures and definitions */ -/* describing RIO host card shared memory */ -/* window interface structures: */ -/* PARMMAP */ -/* RUP */ -/* PHB */ -/* LPB */ -/* PKT */ -/* */ -/************************************************************************/ - -/* History... - -1.0.0 07/06/99 NPV Creation. (based on PARMMAP.H) - -*/ - -#ifndef _riowinif_h /* If RIOWINDIF.H not already defined */ -#define _riowinif_h 1 - -/***************************************************************************** -******************************** ********************************* -******************************** General ********************************* -******************************** ********************************* -*****************************************************************************/ - -#define TPNULL ((_u16)(0x8000)) - -/***************************************************************************** -******************************** ******************************** -******************************** PARM_MAP ******************************** -******************************** ******************************** -*****************************************************************************/ - -/* The PARM_MAP structure defines global values relating to the Host Card / RTA - and is the main structure from which all other structures are referenced. */ - -typedef struct _PARM_MAP { - _u16 phb_ptr; /* 0x00 Pointer to the PHB array */ - _u16 phb_num_ptr; /* 0x02 Ptr to Number of PHB's */ - _u16 free_list; /* 0x04 Free List pointer */ - _u16 free_list_end; /* 0x06 Free List End pointer */ - _u16 q_free_list_ptr; /* 0x08 Ptr to Q_BUF variable */ - _u16 unit_id_ptr; /* 0x0A Unit Id */ - _u16 link_str_ptr; /* 0x0C Link Structure Array */ - _u16 bootloader_1; /* 0x0E 1st Stage Boot Loader */ - _u16 bootloader_2; /* 0x10 2nd Stage Boot Loader */ - _u16 port_route_map_ptr; /* 0x12 Port Route Map */ - _u16 route_ptr; /* 0x14 Route Map */ - _u16 map_present; /* 0x16 Route Map present */ - _u16 pkt_num; /* 0x18 Total number of packets */ - _u16 q_num; /* 0x1A Total number of Q packets */ - _u16 buffers_per_port; /* 0x1C Number of buffers per port */ - _u16 heap_size; /* 0x1E Initial size of heap */ - _u16 heap_left; /* 0x20 Current Heap left */ - _u16 error; /* 0x22 Error code */ - _u16 tx_max; /* 0x24 Max number of tx pkts per phb */ - _u16 rx_max; /* 0x26 Max number of rx pkts per phb */ - _u16 rx_limit; /* 0x28 For high / low watermarks */ - _u16 links; /* 0x2A Links to use */ - _u16 timer; /* 0x2C Interrupts per second */ - _u16 rups; /* 0x2E Pointer to the RUPs */ - _u16 max_phb; /* 0x30 Mostly for debugging */ - _u16 living; /* 0x32 Just increments!! */ - _u16 init_done; /* 0x34 Initialisation over */ - _u16 booting_link; /* 0x36 */ - _u16 idle_count; /* 0x38 Idle time counter */ - _u16 busy_count; /* 0x3A Busy counter */ - _u16 idle_control; /* 0x3C Control Idle Process */ - _u16 tx_intr; /* 0x3E TX interrupt pending */ - _u16 rx_intr; /* 0x40 RX interrupt pending */ - _u16 rup_intr; /* 0x42 RUP interrupt pending */ - -} PARM_MAP; - -/* Same thing again, but defined as offsets... */ - -#define PM_phb_ptr 0x00 /* 0x00 Pointer to the PHB array */ -#define PM_phb_num_ptr 0x02 /* 0x02 Ptr to Number of PHB's */ -#define PM_free_list 0x04 /* 0x04 Free List pointer */ -#define PM_free_list_end 0x06 /* 0x06 Free List End pointer */ -#define PM_q_free_list_ptr 0x08 /* 0x08 Ptr to Q_BUF variable */ -#define PM_unit_id_ptr 0x0A /* 0x0A Unit Id */ -#define PM_link_str_ptr 0x0C /* 0x0C Link Structure Array */ -#define PM_bootloader_1 0x0E /* 0x0E 1st Stage Boot Loader */ -#define PM_bootloader_2 0x10 /* 0x10 2nd Stage Boot Loader */ -#define PM_port_route_map_ptr 0x12 /* 0x12 Port Route Map */ -#define PM_route_ptr 0x14 /* 0x14 Route Map */ -#define PM_map_present 0x16 /* 0x16 Route Map present */ -#define PM_pkt_num 0x18 /* 0x18 Total number of packets */ -#define PM_q_num 0x1A /* 0x1A Total number of Q packets */ -#define PM_buffers_per_port 0x1C /* 0x1C Number of buffers per port */ -#define PM_heap_size 0x1E /* 0x1E Initial size of heap */ -#define PM_heap_left 0x20 /* 0x20 Current Heap left */ -#define PM_error 0x22 /* 0x22 Error code */ -#define PM_tx_max 0x24 /* 0x24 Max number of tx pkts per phb */ -#define PM_rx_max 0x26 /* 0x26 Max number of rx pkts per phb */ -#define PM_rx_limit 0x28 /* 0x28 For high / low watermarks */ -#define PM_links 0x2A /* 0x2A Links to use */ -#define PM_timer 0x2C /* 0x2C Interrupts per second */ -#define PM_rups 0x2E /* 0x2E Pointer to the RUPs */ -#define PM_max_phb 0x30 /* 0x30 Mostly for debugging */ -#define PM_living 0x32 /* 0x32 Just increments!! */ -#define PM_init_done 0x34 /* 0x34 Initialisation over */ -#define PM_booting_link 0x36 /* 0x36 */ -#define PM_idle_count 0x38 /* 0x38 Idle time counter */ -#define PM_busy_count 0x3A /* 0x3A Busy counter */ -#define PM_idle_control 0x3C /* 0x3C Control Idle Process */ -#define PM_tx_intr 0x3E /* 0x4E TX interrupt pending */ -#define PM_rx_intr 0x40 /* 0x40 RX interrupt pending */ -#define PM_rup_intr 0x42 /* 0x42 RUP interrupt pending */ -#define sizeof_PARM_MAP 0x44 /* structure size = 0x44 */ - -/* PARM_MAP.error definitions... */ -#define E_NO_ERROR 0x00 -#define E_PROCESS_NOT_INIT 0x01 -#define E_LINK_TIMEOUT 0x02 -#define E_NO_ROUTE 0x03 -#define E_CONFUSED 0x04 -#define E_HOME 0x05 -#define E_CSUM_FAIL 0x06 -#define E_DISCONNECTED 0x07 -#define E_BAD_RUP 0x08 -#define E_NO_VIRGIN 0x09 -#define E_BOOT_RUP_BUSY 0x10 -#define E_CHANALLOC 0x80 -#define E_POLL_ALLOC 0x81 -#define E_LTTWAKE 0x82 -#define E_LTT_ALLOC 0x83 -#define E_LRT_ALLOC 0x84 -#define E_CIRRUS 0x85 -#define E_MONITOR 0x86 -#define E_PHB_ALLOC 0x87 -#define E_ARRAY_ALLOC 0x88 -#define E_QBUF_ALLOC 0x89 -#define E_PKT_ALLOC 0x8a -#define E_GET_TX_Q_BUF 0x8b -#define E_GET_RX_Q_BUF 0x8c -#define E_MEM_OUT 0x8d -#define E_MMU_INIT 0x8e -#define E_LTT_INIT 0x8f -#define E_LRT_INIT 0x90 -#define E_LINK_RUN 0x91 -#define E_MONITOR_ALLOC 0x92 -#define E_MONITOR_INIT 0x93 -#define E_POLL_INIT 0x94 - -/* PARM_MAP.links definitions... */ -#define RIO_LINK_ENABLE 0x80FF - -/***************************************************************************** -********************************** *********************************** -********************************** RUP *********************************** -********************************** *********************************** -*****************************************************************************/ - -/* The RUP (Remote Unit Port) structure relates to the Remote Terminal Adapters - attached to the system and there is normally an array of MAX_RUPS (=16) structures - in a host card, defined by PARM_MAP->rup. */ - -typedef struct _RUP { - _u16 txpkt; /* 0x00 Outgoing packet */ - _u16 rxpkt; /* 0x02 ncoming packet */ - _u16 link; /* 0x04 Which link to send packet down ? */ - _u8 rup_dest_unit[2]; /* 0x06 Destination Unit */ - _u16 handshake; /* 0x08 Handshaking */ - _u16 timeout; /* 0x0A Timeout */ - _u16 status; /* 0x0C Status */ - _u16 txcontrol; /* 0x0E Transmit control */ - _u16 rxcontrol; /* 0x10 Receive control */ - -} RUP; - -/* Same thing again, but defined as offsets... */ - -#define RUP_txpkt 0x00 /* 0x00 Outgoing packet */ -#define RUP_rxpkt 0x02 /* 0x02 Incoming packet */ -#define RUP_link 0x04 /* 0x04 Which link to send packet down ? */ -#define RUP_rup_dest_unit 0x06 /* 0x06 Destination Unit */ -#define RUP_handshake 0x08 /* 0x08 Handshaking */ -#define RUP_timeout 0x0A /* 0x0A Timeout */ -#define RUP_status 0x0C /* 0x0C Status */ -#define RUP_txcontrol 0x0E /* 0x0E Transmit control */ -#define RUP_rxcontrol 0x10 /* 0x10 Receive control */ -#define sizeof_RUP 0x12 /* structure size = 0x12 */ - -#define MAX_RUP 16 - -/* RUP.txcontrol definitions... */ -#define TX_RUP_INACTIVE 0 /* Nothing to transmit */ -#define TX_PACKET_READY 1 /* Transmit packet ready */ -#define TX_LOCK_RUP 2 /* Transmit side locked */ - -/* RUP.txcontrol definitions... */ -#define RX_RUP_INACTIVE 0 /* Nothing received */ -#define RX_PACKET_READY 1 /* Packet received */ - -#define RUP_NO_OWNER 0xFF /* RUP not owned by any process */ - -/***************************************************************************** -********************************** *********************************** -********************************** PHB *********************************** -********************************** *********************************** -*****************************************************************************/ - -/* The PHB (Port Header Block) structure relates to the serial ports attached - to the system and there is normally an array of MAX_PHBS (=128) structures - in a host card, defined by PARM_MAP->phb_ptr and PARM_MAP->phb_num_ptr. */ - -typedef struct _PHB { - _u16 source; /* 0x00 Location of the PHB in the host card */ - _u16 handshake; /* 0x02 Used to manage receive packet flow control */ - _u16 status; /* 0x04 Internal port transmit/receive status */ - _u16 timeout; /* 0x06 Time period to wait for an ACK */ - _u16 link; /* 0x08 The host link associated with the PHB */ - _u16 destination; /* 0x0A Location of the remote port on the network */ - - _u16 tx_start; /* 0x0C first entry in the packet array for transmit packets */ - _u16 tx_end; /* 0x0E last entry in the packet array for transmit packets */ - _u16 tx_add; /* 0x10 position in the packet array for new transmit packets */ - _u16 tx_remove; /* 0x12 current position in the packet pointer array */ - - _u16 rx_start; /* 0x14 first entry in the packet array for receive packets */ - _u16 rx_end; /* 0x16 last entry in the packet array for receive packets */ - _u16 rx_add; /* 0x18 position in the packet array for new receive packets */ - _u16 rx_remove; /* 0x1A current position in the packet pointer array */ - -} PHB; - -/* Same thing again, but defined as offsets... */ - -#define PHB_source 0x00 /* 0x00 Location of the PHB in the host card */ -#define PHB_handshake 0x02 /* 0x02 Used to manage receive packet flow control */ -#define PHB_status 0x04 /* 0x04 Internal port transmit/receive status */ -#define PHB_timeout 0x06 /* 0x06 Time period to wait for an ACK */ -#define PHB_link 0x08 /* 0x08 The host link associated with the PHB */ -#define PHB_destination 0x0A /* 0x0A Location of the remote port on the network */ -#define PHB_tx_start 0x0C /* 0x0C first entry in the packet array for transmit packets */ -#define PHB_tx_end 0x0E /* 0x0E last entry in the packet array for transmit packets */ -#define PHB_tx_add 0x10 /* 0x10 position in the packet array for new transmit packets */ -#define PHB_tx_remove 0x12 /* 0x12 current position in the packet pointer array */ -#define PHB_rx_start 0x14 /* 0x14 first entry in the packet array for receive packets */ -#define PHB_rx_end 0x16 /* 0x16 last entry in the packet array for receive packets */ -#define PHB_rx_add 0x18 /* 0x18 position in the packet array for new receive packets */ -#define PHB_rx_remove 0x1A /* 0x1A current position in the packet pointer array */ -#define sizeof_PHB 0x1C /* structure size = 0x1C */ - -/* PHB.handshake definitions... */ -#define PHB_HANDSHAKE_SET 0x0001 /* Set by LRT */ -#define PHB_HANDSHAKE_RESET 0x0002 /* Set by ISR / driver */ -#define PHB_HANDSHAKE_FLAGS (PHB_HANDSHAKE_RESET|PHB_HANDSHAKE_SET) - /* Reset by ltt */ - -#define MAX_PHB 128 /* range 0-127 */ - -/***************************************************************************** -********************************** *********************************** -********************************** LPB *********************************** -********************************** *********************************** -*****************************************************************************/ - -/* The LPB (Link Parameter Block) structure relates to a RIO Network Link - and there is normally an array of MAX_LINKS (=4) structures in a host card, - defined by PARM_MAP->link_str_ptr. */ - -typedef struct _LPB { - _u16 link_number; /* 0x00 Link Number */ - _u16 in_ch; /* 0x02 Link In Channel */ - _u16 out_ch; /* 0x04 Link Out Channel */ - _u8 attached_serial[4]; /* 0x06 Attached serial number */ - _u8 attached_host_serial[4]; /* 0x0A Serial number of Host who booted other end */ - _u16 descheduled; /* 0x0E Currently Descheduled */ - _u16 state; /* 0x10 Current state */ - _u16 send_poll; /* 0x12 Send a Poll Packet */ - _u16 ltt_p; /* 0x14 Process Descriptor */ - _u16 lrt_p; /* 0x16 Process Descriptor */ - _u16 lrt_status; /* 0x18 Current lrt status */ - _u16 ltt_status; /* 0x1A Current ltt status */ - _u16 timeout; /* 0x1C Timeout value */ - _u16 topology; /* 0x1E Topology bits */ - _u16 mon_ltt; /* 0x20 */ - _u16 mon_lrt; /* 0x22 */ - _u16 num_pkts; /* 0x24 */ - _u16 add_packet_list; /* 0x26 Add packets to here */ - _u16 remove_packet_list; /* 0x28 Send packets from here */ - - _u16 lrt_fail_chan; /* 0x2A Lrt's failure channel */ - _u16 ltt_fail_chan; /* 0x2C Ltt's failure channel */ - - RUP rup; /* 0x2E RUP structure for HOST to driver comms */ - RUP link_rup; /* 0x40 RUP for the link (POLL, topology etc.) */ - _u16 attached_link; /* 0x52 Number of attached link */ - _u16 csum_errors; /* 0x54 csum errors */ - _u16 num_disconnects; /* 0x56 number of disconnects */ - _u16 num_sync_rcvd; /* 0x58 # sync's received */ - _u16 num_sync_rqst; /* 0x5A # sync requests */ - _u16 num_tx; /* 0x5C Num pkts sent */ - _u16 num_rx; /* 0x5E Num pkts received */ - _u16 module_attached; /* 0x60 Module tpyes of attached */ - _u16 led_timeout; /* 0x62 LED timeout */ - _u16 first_port; /* 0x64 First port to service */ - _u16 last_port; /* 0x66 Last port to service */ - -} LPB; - -/* Same thing again, but defined as offsets... */ - -#define LPB_link_number 0x00 /* 0x00 Link Number */ -#define LPB_in_ch 0x02 /* 0x02 Link In Channel */ -#define LPB_out_ch 0x04 /* 0x04 Link Out Channel */ -#define LPB_attached_serial 0x06 /* 0x06 Attached serial number */ -#define LPB_attached_host_serial 0x0A /* 0x0A Serial number of Host who booted other end */ -#define LPB_descheduled 0x0E /* 0x0E Currently Descheduled */ -#define LPB_state 0x10 /* 0x10 Current state */ -#define LPB_send_poll 0x12 /* 0x12 Send a Poll Packet */ -#define LPB_ltt_p 0x14 /* 0x14 Process Descriptor */ -#define LPB_lrt_p 0x16 /* 0x16 Process Descriptor */ -#define LPB_lrt_status 0x18 /* 0x18 Current lrt status */ -#define LPB_ltt_status 0x1A /* 0x1A Current ltt status */ -#define LPB_timeout 0x1C /* 0x1C Timeout value */ -#define LPB_topology 0x1E /* 0x1E Topology bits */ -#define LPB_mon_ltt 0x20 /* 0x20 */ -#define LPB_mon_lrt 0x22 /* 0x22 */ -#define LPB_num_pkts 0x24 /* 0x24 */ -#define LPB_add_packet_list 0x26 /* 0x26 Add packets to here */ -#define LPB_remove_packet_list 0x28 /* 0x28 Send packets from here */ -#define LPB_lrt_fail_chan 0x2A /* 0x2A Lrt's failure channel */ -#define LPB_ltt_fail_chan 0x2C /* 0x2C Ltt's failure channel */ -#define LPB_rup 0x2E /* 0x2E RUP structure for HOST to driver comms */ -#define LPB_link_rup 0x40 /* 0x40 RUP for the link (POLL, topology etc.) */ -#define LPB_attached_link 0x52 /* 0x52 Number of attached link */ -#define LPB_csum_errors 0x54 /* 0x54 csum errors */ -#define LPB_num_disconnects 0x56 /* 0x56 number of disconnects */ -#define LPB_num_sync_rcvd 0x58 /* 0x58 # sync's received */ -#define LPB_num_sync_rqst 0x5A /* 0x5A # sync requests */ -#define LPB_num_tx 0x5C /* 0x5C Num pkts sent */ -#define LPB_num_rx 0x5E /* 0x5E Num pkts received */ -#define LPB_module_attached 0x60 /* 0x60 Module tpyes of attached */ -#define LPB_led_timeout 0x62 /* 0x62 LED timeout */ -#define LPB_first_port 0x64 /* 0x64 First port to service */ -#define LPB_last_port 0x66 /* 0x66 Last port to service */ -#define sizeof_LPB 0x68 /* structure size = 0x68 */ - -#define LINKS_PER_UNIT 4 /* number of links from a host */ - -/***************************************************************************** -******************************** ******************************* -******************************** FREE_LIST ******************************* -******************************** ******************************* -*****************************************************************************/ - -/* Used to overlay packet headers when allocating/freeing packets from the free list */ - -typedef struct _FREE_LIST { - _u16 next; /* 0x00 offset of next list item */ - _u16 prev; /* 0x02 offset of previous list item */ - -} FREE_LIST; - -/* Same thing again, but defined as offsets... */ - -#define FL_next 0x00 /* 0x00 offset of next list item */ -#define FL_prev 0x02 /* 0x02 offset of previous list item */ - -/***************************************************************************** -********************************** *********************************** -********************************** PKT *********************************** -********************************** *********************************** -*****************************************************************************/ - -/* The PKT is the main unit of communication between Host Cards and RTAs across - the RIO network. */ - -#define PKT_MAX_DATA_LEN 72 /* Size of packet data */ - -typedef struct _PKT { - _u8 dest_unit; /* 0x00 Destination Unit Id */ - _u8 dest_port; /* 0x01 Destination Port */ - _u8 src_unit; /* 0x02 Source Unit Id */ - _u8 src_port; /* 0x03 Source Port */ - _u8 len; /* 0x04 Length (in bytes) of data field */ - _u8 control; /* 0x05 */ - _u8 data[PKT_MAX_DATA_LEN]; /* 0x06 Actual data */ - _u16 csum; /* 0x4E C-SUM */ - -} PKT; - -/* Same thing again, but defined as offsets... */ - -#define PKT_dest_unit 0x00 /* 0x00 Destination Unit Id */ -#define PKT_dest_port 0x01 /* 0x01 Destination Port */ -#define PKT_src_unit 0x02 /* 0x02 Source Unit Id */ -#define PKT_src_port 0x03 /* 0x03 Source Port */ -#define PKT_len 0x04 /* 0x04 Length (in bytes) of data field */ -#define PKT_control 0x05 /* 0x05 */ -#define PKT_data 0x06 /* 0x06 Actual data */ -#define PKT_csum 0x4E /* 0x4E C-SUM */ -#define sizeof_PKT 0x50 /* structure size = 0x50 */ - -/* PKT.len definitions... */ -#define PKT_CMD_BIT 0x80 -#define PKT_CMD_DATA 0x80 -#define PKT_LEN_MASK 0x7F - -/* PKT.control definitions... */ -#define PKT_ACK 0x40 -#define PKT_TGL 0x20 -#define DATA_WNDW 0x10 -#define PKT_TTL_MASK 0x0F -#define MAX_TTL 0x0F - -/***************************************************************************** -***************************** **************************** -***************************** Control Packets **************************** -***************************** **************************** -*****************************************************************************/ - -/* The following definitions and structures define the control packets sent - between the driver and RIO Ports, RTAs and Host Cards. */ - -#define PRE_EMPTIVE 0x80 /* Pre-emptive command (sent via port's RUP) */ - -/* "in-band" and "pre-emptive" port commands... */ -#define OPEN 0x00 /* Driver->RIO Open a port */ -#define CONFIG 0x01 /* Driver->RIO Configure a port */ -#define MOPEN 0x02 /* Driver->RIO Modem open (wait for DCD) */ -#define CLOSE 0x03 /* Driver->RIO Close a port */ -#define WFLUSH (0x04|PRE_EMPTIVE) /* Driver->RIO Write flush */ -#define RFLUSH (0x05|PRE_EMPTIVE) /* Driver->RIO Read flush */ -#define RESUME (0x06|PRE_EMPTIVE) /* Driver->RIO Behave as if XON received */ -#define SBREAK 0x07 /* Driver->RIO Start break */ -#define EBREAK 0x08 /* Driver->RIO End break */ -#define SUSPEND (0x09|PRE_EMPTIVE) /* Driver->RIO Behave as if XOFF received */ -#define FCLOSE (0x0A|PRE_EMPTIVE) /* Driver->RIO Force close */ -#define XPRINT 0x0B /* Driver->RIO Xprint packet */ -#define MBIS (0x0C|PRE_EMPTIVE) /* Driver->RIO Set modem lines */ -#define MBIC (0x0D|PRE_EMPTIVE) /* Driver->RIO Clear modem lines */ -#define MSET (0x0E|PRE_EMPTIVE) /* Driver->RIO Set modem lines */ -#define PCLOSE 0x0F /* Driver->RIO Pseudo close */ -#define MGET (0x10|PRE_EMPTIVE) /* Driver->RIO Force update of modem status */ -#define MEMDUMP (0x11|PRE_EMPTIVE) /* Driver->RIO DEBUG request for RTA memory */ -#define READ_REGISTER (0x12|PRE_EMPTIVE) /* Driver->RIO DEBUG read CD1400 register */ - -/* Remote Unit Port (RUP) packet definitions... (specified in PKT.dest_unit and PKT.src_unit) */ -#define SYNC_RUP 0xFF /* Download internal */ -#define COMMAND_RUP 0xFE /* Command ack/status */ -#define ERROR_RUP 0xFD /* Download internal */ -#define POLL_RUP 0xFC /* Download internal */ -#define BOOT_RUP 0xFB /* Used to boot RTAs */ -#define ROUTE_RUP 0xFA /* Used to specify routing/topology */ -#define STATUS_RUP 0xF9 /* Not used */ -#define POWER_RUP 0xF8 /* Download internal */ - -/* COMMAND_RUP definitions... */ -#define COMPLETE (0x20|PRE_EMPTIVE) /* RIO->Driver Command complete */ -#define BREAK_RECEIVED (0x21|PRE_EMPTIVE) /* RIO->Driver Break received */ -#define MODEM_STATUS (0x22|PRE_EMPTIVE) /* RIO->Driver Modem status change */ - -/* BOOT_RUP definitions... */ -#define BOOT_REQUEST 0x00 /* RIO->Driver Request for boot */ -#define BOOT_ABORT 0x01 /* Driver->RIO Abort a boot */ -#define BOOT_SEQUENCE 0x02 /* Driver->RIO Packet with firmware details */ -#define BOOT_COMPLETED 0x03 /* RIO->Driver Boot completed */ -#define IFOAD 0x2F /* Driver->RIO Shutdown/Reboot RTA (Fall Over And Die) */ -#define IDENTIFY 0x30 /* Driver->RIO Identify RTA */ -#define ZOMBIE 0x31 /* Driver->RIO Shutdown/Flash LEDs */ -#define UFOAD 0x32 /* Driver->RIO Shutdown/Reboot neighbouring RTA */ -#define IWAIT 0x33 /* Driver->RIO Pause booting process */ - -/* ROUTE_RUP definitions... */ -#define ROUTE_REQUEST 0x00 /* RIO->Driver Request an ID */ -#define ROUTE_FOAD 0x01 /* Driver->RIO Shutdown/reboot RTA */ -#define ROUTE_ALREADY 0x02 /* Driver->RIO Not used */ -#define ROUTE_USED 0x03 /* Driver->RIO Not used */ -#define ROUTE_ALLOCATE 0x04 /* Driver->RIO Allocate RTA RUP numbers */ -#define ROUTE_REQ_TOP 0x05 /* Driver->RIO Not used */ -#define ROUTE_TOPOLOGY 0x06 /* RIO->Driver Route/Topology status */ - -/***************************************************************************** -********************************** ********************************** -********************************** OPEN ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - Sent to open a port. - Structure of configuration info used with OPEN, CONFIG and MOPEN packets... */ - -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_Cor1 (PKT_Data+1) /* Channel Option Register 1 */ -#define PKT_Cor2 (PKT_Data+2) /* Channel Option Register 2 */ -#define PKT_Cor4 (PKT_Data+3) /* Channel Option Register 4 */ -#define PKT_Cor5 (PKT_Data+4) /* Channel Option Register 5 */ -#define PKT_TxXon (PKT_Data+5) /* Transmit XON character */ -#define PKT_TxXoff (PKT_Data+6) /* Transmit XOFF character */ -#define PKT_RxXon (PKT_Data+7) /* Receive XON character */ -#define PKT_RxXoff (PKT_Data+8) /* Receive XOFF character */ -#define PKT_Lnext (PKT_Data+9) /* Lnext character */ -#define PKT_TxBaud (PKT_Data+10) /* Transmit baud rate */ -#define PKT_RxBaud (PKT_Data+11) /* Receive baud rate */ - -/* COR1 definitions... */ -#define COR1_PARITY 0xE0 /* Parity mask */ -#define COR1_NONE 0x00 /* No parity */ -#define COR1_SPACE 0x20 /* Space parity */ -#define COR1_EVEN 0x40 /* Even parity */ -#define COR1_MARK 0xA0 /* Mark parity */ -#define COR1_ODD 0xC0 /* Odd parity */ - -#define COR1_STOPBITS 0x0C /* Stop bits mask */ -#define COR1_STOP1 0x00 /* 1 stop bit */ -#define COR1_STOP1_5 0x04 /* 1.5 stop bits */ -#define COR1_STOP2 0x08 /* 2 stop bits */ - -#define COR1_DATABITS 0x03 /* Data bits mask */ -#define COR1_DATA5 0x00 /* 5 data bits */ -#define COR1_DATA6 0x01 /* 6 data bits */ -#define COR1_DATA7 0x02 /* 7 data bits */ -#define COR1_DATA8 0x03 /* 8 data bits */ - -/* COR2 definitions... */ -#define COR2_XON_TXFLOW 0x40 /* XON/XOFF Transmit Flow */ -#define COR2_XANY_TXFLOW 0xC0 /* XON/XANY Transmit Flow */ -#define COR2_HUPCL 0x20 /* Hang Up On Close */ -#define COR2_DSR_TXFLOW 0x08 /* DSR Transmit Flow Control */ -#define COR2_RTS_RXFLOW 0x04 /* RTS Receive Flow Control */ -#define COR2_CTS_TXFLOW 0x02 /* CTS Transmit Flow Control */ -#define COR2_XON_RXFLOW 0x01 /* XON/XOFF Receive Flow */ - -/* COR4 definition... */ -#define COR4_IGNCR 0x80 /* Discard received CR */ -#define COR4_ICRNL 0x40 /* Map received CR -> NL */ -#define COR4_INLCR 0x20 /* Map received NL -> CR */ -#define COR4_IGNBRK 0x10 /* Ignore Received Break */ -#define COR4_NBRKINT 0x08 /* No interrupt on rx Break */ -#define COR4_IGNPAR 0x04 /* ignore rx parity error chars */ -#define COR4_PARMRK 0x02 /* Mark rx parity error chars */ -#define COR4_RAISEMOD 0x01 /* Raise modem lines on !0 baud */ - -/* COR5 definitions... */ -#define COR5_ISTRIP 0x80 /* Strip input chars to 7 bits */ -#define COR5_LNE 0x40 /* Enable LNEXT processing */ -#define COR5_CMOE 0x20 /* Match good & error characters */ -#define COR5_TAB3 0x10 /* TAB3 mode */ -#define COR5_TSTATE_ON 0x08 /* Enable tbusy/tstop monitoring */ -#define COR5_TSTATE_OFF 0x04 /* Disable tbusy/tstop monitoring */ -#define COR5_ONLCR 0x02 /* NL -> CR NL on output */ -#define COR5_OCRNL 0x01 /* CR -> NL on output */ - -/* RxBaud and TxBaud definitions... */ -#define RIO_B0 0x00 /* RTS / DTR signals dropped */ -#define RIO_B50 0x01 /* 50 baud */ -#define RIO_B75 0x02 /* 75 baud */ -#define RIO_B110 0x03 /* 110 baud */ -#define RIO_B134 0x04 /* 134.5 baud */ -#define RIO_B150 0x05 /* 150 baud */ -#define RIO_B200 0x06 /* 200 baud */ -#define RIO_B300 0x07 /* 300 baud */ -#define RIO_B600 0x08 /* 600 baud */ -#define RIO_B1200 0x09 /* 1200 baud */ -#define RIO_B1800 0x0A /* 1800 baud */ -#define RIO_B2400 0x0B /* 2400 baud */ -#define RIO_B4800 0x0C /* 4800 baud */ -#define RIO_B9600 0x0D /* 9600 baud */ -#define RIO_B19200 0x0E /* 19200 baud */ -#define RIO_B38400 0x0F /* 38400 baud */ -#define RIO_B56000 0x10 /* 56000 baud */ -#define RIO_B57600 0x11 /* 57600 baud */ -#define RIO_B64000 0x12 /* 64000 baud */ -#define RIO_B115200 0x13 /* 115200 baud */ -#define RIO_B2000 0x14 /* 2000 baud */ - -/***************************************************************************** -********************************* ********************************* -********************************* CONFIG ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - CONFIG is sent from the driver to configure an already opened port. - Packet structure is same as OPEN. */ - -/***************************************************************************** -********************************* ********************************** -********************************* MOPEN ********************************** -********************************* ********************************** -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - MOPEN is sent from the driver to open a port attached to a modem. (in-band) - Packet structure is same as OPEN. */ - -/***************************************************************************** -********************************* ********************************** -********************************* CLOSE ********************************** -********************************* ********************************** -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - CLOSE is sent from the driver to close a previously opened port. - No parameters. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -/***************************************************************************** -********************************* ********************************* -********************************* WFLUSH ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - WFLUSH is sent pre-emptively from the driver to flush the write buffers and - packets of a port. (pre-emptive) - - WFLUSH is also sent in-band from the driver to a port as a marker to end - write flushing previously started by a pre-emptive WFLUSH packet. (in-band) - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ - -/***************************************************************************** -********************************* ********************************* -********************************* RFLUSH ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - RFLUSH is sent pre-emptively from the driver to flush the read buffers and - packets of a port. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************* ********************************* -********************************* RESUME ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - RESUME is sent pre-emptively from the driver to cause a port to resume - transmission of data if blocked by XOFF. (as if XON had been received) - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************* ********************************* -********************************* SBREAK ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - SBREAK is sent in-band from the driver to a port to suspend data and start - break signal transmission. - - If the break delay is 0, the break signal will be acknowledged with a - RUP_COMMAND, COMPLETE packet and continue until an EBREAK packet is received. - - Otherwise, there is no acknowledgement and the break signal will last for the - specified number of mS. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_BreakDelay (PKT_Data+1) /* Break delay in mS */ - -/***************************************************************************** -********************************* ********************************* -********************************* EBREAK ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - EBREAK is sent in-band from the driver to a port to stop transmission of a - break signal. - - No parameters. */ - -/***************************************************************************** -********************************* ******************************** -********************************* SUSPEND ******************************** -********************************* ******************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - SUSPEND is sent pre-emptively from the driver to cause a port to suspend - transmission of data. (as if XOFF had been received) - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************* ********************************* -********************************* FCLOSE ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - FCLOSE is sent pre-emptively from the driver to force close a port. - A force close flushes receive and transmit queues, and also lowers all output - modem signals if the COR5_HUPCL (Hang Up On Close) flag is set. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************* ********************************* -********************************* XPRINT ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - XPRINT is sent as a normal I/O data packet except that the PKT_CMD_BIT of - the "len" field is set, and the first "data" byte is XPRINT. - - The I/O data in the XPRINT packet will contain the following: - - Transparent Print Start Sequence - - Transparent Print Data - - Transparent Print Stop Sequence. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -/***************************************************************************** -********************************** ********************************** -********************************** MBIS ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MBIS is sent pre-emptively from the driver to set a port's modem signals. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif -#define PKT_ModemSet (PKT_Data+4) /* Modem set signals mask */ - -/* ModemSet definitions... */ -#define MBIS_RTS 0x01 /* RTS modem signal */ -#define MBIS_DTR 0x02 /* DTR modem signal */ - -/***************************************************************************** -********************************** ********************************** -********************************** MBIC ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MBIC is sent pre-emptively from the driver to clear a port's modem signals. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -#define PKT_ModemClear (PKT_Data+4) /* Modem clear signals mask */ - -/* ModemClear definitions... */ -#define MBIC_RTS 0x01 /* RTS modem signal */ -#define MBIC_DTR 0x02 /* DTR modem signal */ - -/***************************************************************************** -********************************** ********************************** -********************************** MSET ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MSET is sent pre-emptively from the driver to set/clear a port's modem signals. */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#endif - -#define PKT_ModemSet (PKT_Data+4) /* Modem set signals mask */ - -/* ModemSet definitions... */ -#define MSET_RTS 0x01 /* RTS modem signal */ -#define MSET_DTR 0x02 /* DTR modem signal */ - -/***************************************************************************** -********************************* ********************************* -********************************* PCLOSE ********************************* -********************************* ********************************* -*****************************************************************************/ - -/* (Driver->RIO,in-band) - - PCLOSE is sent from the driver to pseudo close a previously opened port. - - The port will close when all data has been sent/received, however, the - port's transmit / receive and modem signals will be left enabled and the - port marked internally as Pseudo Closed. */ - -#define PKT_Cmd (PKT_Data+0) /* Command code */ - -/***************************************************************************** -********************************** ********************************** -********************************** MGET ********************************** -********************************** ********************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MGET is sent pre-emptively from the driver to request the port's current modem signals. */ - -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ - -/***************************************************************************** -********************************* ******************************** -********************************* MEMDUMP ******************************** -********************************* ******************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - MEMDUMP is sent pre-emptively from the driver to request a dump of 32 bytes - of the specified port's RTA address space. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#define PKT_Address (PKT_Data+6) /* Requested address */ - -/***************************************************************************** -****************************** ***************************** -****************************** READ_REGISTER ***************************** -****************************** ***************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - READ_REGISTER is sent pre-emptively from the driver to request the contents - of the CD1400 register specified in address. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#define PKT_Address (PKT_Data+6) /* Requested address */ - -/***************************************************************************** -************************ ************************** -************************ COMMAND_RUP - COMPLETE ************************** -************************ ************************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - COMPLETE is sent in response to all port I/O control command - packets, except MEMDUMP and READ_REGISTER. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ -#define PKT_PortStatus (PKT_Data+4) /* Port signal status */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ - -/* ModemStatus definitions... */ -#define MODEM_DSR 0x80 /* Data Set Ready modem state */ -#define MODEM_CTS 0x40 /* Clear To Send modem state */ -#define MODEM_RI 0x20 /* Ring Indicate modem state */ -#define MODEM_CD 0x10 /* Carrier Detect modem state */ -#define MODEM_TSTOP 0x08 /* Transmit Stopped state */ -#define MODEM_TEMPTY 0x04 /* Transmit Empty state */ -#define MODEM_DTR 0x02 /* DTR modem output state */ -#define MODEM_RTS 0x01 /* RTS modem output state */ - -/* PortStatus definitions... */ -#define PORT_ISOPEN 0x01 /* Port open ? */ -#define PORT_HUPCL 0x02 /* Hangup on close? */ -#define PORT_MOPENPEND 0x04 /* Modem open pending */ -#define PORT_ISPARALLEL 0x08 /* Parallel port */ -#define PORT_BREAK 0x10 /* Port on break */ -#define PORT_STATUSPEND 0020 /* Status packet pending */ -#define PORT_BREAKPEND 0x40 /* Break packet pending */ -#define PORT_MODEMPEND 0x80 /* Modem status packet pending */ - -/***************************************************************************** -************************ ************************** -************************ COMMAND_RUP - COMPLETE ************************** -************************ ************************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - COMPLETE is sent in response to all port I/O control command - packets, except MEMDUMP and READ_REGISTER. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#endif -#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ -#define PKT_PortStatus (PKT_Data+4) /* Port signal status */ -#if 0 -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#endif - -/* ModemStatus definitions... */ -#define MODEM_DSR 0x80 /* Data Set Ready modem state */ -#define MODEM_CTS 0x40 /* Clear To Send modem state */ -#define MODEM_RI 0x20 /* Ring Indicate modem state */ -#define MODEM_CD 0x10 /* Carrier Detect modem state */ -#define MODEM_TSTOP 0x08 /* Transmit Stopped state */ -#define MODEM_TEMPTY 0x04 /* Transmit Empty state */ -#define MODEM_DTR 0x02 /* DTR modem output state */ -#define MODEM_RTS 0x01 /* RTS modem output state */ - -/* PortStatus definitions... */ -#define PORT_ISOPEN 0x01 /* Port open ? */ -#define PORT_HUPCL 0x02 /* Hangup on close? */ -#define PORT_MOPENPEND 0x04 /* Modem open pending */ -#define PORT_ISPARALLEL 0x08 /* Parallel port */ -#define PORT_BREAK 0x10 /* Port on break */ -#define PORT_STATUSPEND 0020 /* Status packet pending */ -#define PORT_BREAKPEND 0x40 /* Break packet pending */ -#define PORT_MODEMPEND 0x80 /* Modem status packet pending */ - -/***************************************************************************** -******************** ******************** -******************** COMMAND_RUP - COMPLETE - MEMDUMP ******************** -******************** ******************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - COMPLETE - MEMDUMP is sent as an acknowledgement for a MEMDUMP - port I/O control command packet. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ -#define PKT_PortStatus (PKT_Data+4) /* Port signal status */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#define PKT_Address (PKT_Data+6) /* Requested address */ -#endif -#define PKT_Dump (PKT_Data+8) /* 32bytes of requested dump data */ - -/***************************************************************************** -***************** ***************** -***************** COMMAND_RUP - COMPLETE - READ_REGISTER ***************** -***************** ***************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - COMPLETE - READ_REGISTER is sent as an acknowledgement for a - READ_REGISTER port I/O control command packet. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /*Command code */ -#define PKT_PhbNum (PKT_Data+1) /*Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#endif -#define PKT_RegisterValue (PKT_Data+3) /* Modem signal status */ -#if 0 -#define PKT_PortStatus (PKT_Data+4) /* Port signal status */ -#define PKT_SubCmd (PKT_Data+5) /* Sub Command */ -#endif - -/***************************************************************************** -********************* *********************** -********************* COMMAND_RUP - BREAK_RECEIVED *********************** -********************* *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - BREAK_RECEIVED packets are sent when the port detects a receive BREAK signal. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#endif - -/***************************************************************************** -********************* ************************* -********************* COMMAND_RUP - MODEM_STATUS ************************* -********************* ************************* -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - COMMAND_RUP - MODEM_STATUS packets are sent whenever the port detects a - change in the input modem signal states. - - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_PhbNum (PKT_Data+1) /* Port number wrt RTA */ -#define PKT_Cmd2 (PKT_Data+2) /* Command code copy */ -#define PKT_ModemStatus (PKT_Data+3) /* Modem signal status */ -#endif - -/***************************************************************************** -************************ ************************* -************************ BOOT_RUP - BOOT_REQUEST ************************* -************************ ************************* -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - BOOT_RUP - BOOT_REQUEST packets are sent to the Driver from RIO to request - firmware code to load onto attached RTAs. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif - -/***************************************************************************** -************************ ************************ -************************ BOOT_RUP - BOOT_SEQUENCE ************************ -************************ ************************ -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - BOOT_SEQUENCE packets are sent from the Driver to RIO in response - to a BOOT_RUP - BOOT_REQUEST packet. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_NumPackets (PKT_Data+2) /* Packets required to load firmware */ -#define PKT_LoadBase (PKT_Data+4) /* RTA firmware load address */ -#define PKT_CodeSize (PKT_Data+6) /* Size of firmware in bytes */ -#define PKT_CmdString (PKT_Data+8) /* Command string */ - -/***************************************************************************** -************************ *********************** -************************ BOOT_RUP - BOOT_COMPLETED *********************** -************************ *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - BOOT_RUP - BOOT_COMPLETE is sent to the Driver from RIO when downloading of - RTA firmware has completed. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_LinkNumber (PKT_Data+1) /* Link number RTA booted on */ -#define PKT_SerialNumber (PKT_Data+2) /* 4 byte serial number */ - -/***************************************************************************** -************************ *********************** -************************ BOOT_RUP - Packet Request *********************** -************************ *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - BOOT_RUP packet without the PKT_CMD_BIT set in the PKT->len field is sent - from RIO to the Driver as a request for a firmware boot packet. */ - -#define PKT_SequenceNumber (PKT_Data+0) /* Packet sequence number */ - -/***************************************************************************** -*********************** *********************** -*********************** BOOT_RUP - Packet Response *********************** -*********************** *********************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - In response to a BOOT_RUP boot packet request, the driver fills out the response - packet with the 70 bytes of the requested sequence. - */ -#if 0 -#define PKT_SequenceNumber (PKT_Data+0) /* Packet sequence number */ -#endif -#define PKT_FirmwarePacket (PKT_Data+2) /* Firmware packet */ - -/***************************************************************************** -**************************** **************************** -**************************** BOOT_RUP - IFOAD **************************** -**************************** **************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - IFOAD packets are sent from the Driver to an RTA to cause the - RTA to shut down and reboot. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_IfoadId1 (PKT_Data+2) /* IFOAD Id 1 */ -#define PKT_IfoadId2 (PKT_Data+3) /* IFOAD Id 2 */ - -#define IFOADID1 0xAD -#define IFOADID2 0xF0 - -/***************************************************************************** -************************** *************************** -************************** BOOT_RUP - IDENTIFY *************************** -************************** *************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - IDENTIFY packets are sent from the Driver to an RTA to cause the - RTA to flash its LEDs for a period of time. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_IdentifyId (PKT_Data+2) /* defines pattern to flash */ - -/***************************************************************************** -**************************** *************************** -**************************** BOOT_RUP - ZOMBIE *************************** -**************************** *************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - ZOMBIE packets are sent from the Driver to an RTA to cause the - RTA to shut down and flash it's LEDs. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_ZombieId1 (PKT_Data+2) /* ZOMBIE Id 1 */ -#define PKT_ZombieId2 (PKT_Data+3) /* ZOMBIE Id 2 */ - -#define ZOMBIEID1 0x52 -#define ZOMBIEID2 0x21 - -/***************************************************************************** -**************************** **************************** -**************************** BOOT_RUP - UFOAD **************************** -**************************** **************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - UFOAD packets are sent from the Driver to an RTA to cause the RTA - to ask it's neighbouring RTA to shut down and reboot. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_LinkNumber (PKT_Data+1) /* Link number of RTA to UFOAD */ -#endif -#define PKT_UfoadId1 (PKT_Data+2) /* UFOAD Id 1 */ -#define PKT_UfoadId2 (PKT_Data+3) /* UFOAD Id 2 */ - -#define UFOADID1 0x1E -#define UFOADID2 0x0D - -/***************************************************************************** -**************************** **************************** -**************************** BOOT_RUP - IWAIT **************************** -**************************** **************************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - BOOT_RUP - IWAIT packets are sent from the Driver to an RTA to cause the RTA - to pause booting on the specified link for 30 seconds. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#define PKT_LinkNumber (PKT_Data+1) /* Link number of RTA to UFOAD */ -#endif -#define PKT_IwaitId1 (PKT_Data+2) /* IWAIT Id 1 */ -#define PKT_IwaitId2 (PKT_Data+3) /* IWAIT Id 2 */ - -#define IWAITID1 0xDE -#define IWAITID2 0xB1 - -/***************************************************************************** -************************ *********************** -************************ ROUTE_RUP - ROUTE_REQUEST *********************** -************************ *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - ROUTE_RUP - ROUTE_REQUEST packets are sent from a newly booted or connected - RTA to a Driver to request an ID (RUP or unit number). - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_SerialNumber (PKT_Data+2) /* 4 byte serial number */ -#define PKT_ModuleTypes (PKT_Data+6) /* RTA Module types */ - -/* ModuleTypes definitions... */ -#define MOD_BLANK 0x0F /* Blank plate attached */ -#define MOD_RS232DB25 0x00 /* RS232 DB25 connector */ -#define MOD_RS232RJ45 0x01 /* RS232 RJ45 connector */ -#define MOD_RS422DB25 0x02 /* RS422 DB25 connector */ -#define MOD_RS485DB25 0x03 /* RS485 DB25 connector */ -#define MOD_PARALLEL 0x04 /* Centronics parallel */ - -#define MOD2 0x08 /* Set to indicate Rev2 module */ - -/***************************************************************************** -************************* ************************* -************************* ROUTE_RUP - ROUTE_FOAD ************************* -************************* ************************* -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - ROUTE_RUP - ROUTE_FOAD packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST - packet to cause the RTA to "Fall Over And Die"., i.e. shutdown and reboot. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_RouteCmdString (PKT_Data+2) /* Command string */ - -/***************************************************************************** -*********************** *********************** -*********************** ROUTE_RUP - ROUTE_ALLOCATE *********************** -*********************** *********************** -*****************************************************************************/ - -/* (Driver->RIO,pre-emptive) - - ROUTE_RUP - ROUTE_ALLOCATE packet is sent as a response to a ROUTE_RUP - ROUTE_REQUEST - packet to allocate the RTA's Id number (RUP number 1..16) - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_IdNum (PKT_Data+1) /* RUP number for ports 1..8 */ -#if 0 -#define PKT_RouteCmdString (PKT_Data+2) /* Command string */ -#endif -#define PKT_IdNum2 (PKT_Data+0x17) /* RUP number for ports 9..16 */ - -/***************************************************************************** -*********************** *********************** -*********************** ROUTE_RUP - ROUTE_TOPOLOGY *********************** -*********************** *********************** -*****************************************************************************/ - -/* (RIO->Driver,pre-emptive) - - ROUTE_RUP - ROUTE_TOPOLOGY packet is sent to inform the driver of an RTA's - current link status. - */ -#if 0 -#define PKT_Cmd (PKT_Data+0) /* Command code */ -#endif -#define PKT_Link1Rup (PKT_Data+2) /* Link 1 RUP number */ -#define PKT_Link1Link (PKT_Data+3) /* Link 1 link number */ -#define PKT_Link2Rup (PKT_Data+4) /* Link 2 RUP number */ -#define PKT_Link2Link (PKT_Data+5) /* Link 2 link number */ -#define PKT_Link3Rup (PKT_Data+6) /* Link 3 RUP number */ -#define PKT_Link3Link (PKT_Data+7) /* Link 3 link number */ -#define PKT_Link4Rup (PKT_Data+8) /* Link 4 RUP number */ -#define PKT_Link4Link (PKT_Data+9) /* Link 4 link number */ -#define PKT_RtaVpdProm (PKT_Data+10) /* 32 bytes of RTA VPD PROM Contents */ - -#endif /* _sxwinif_h */ - -/* End of RIOWINIF.H */ |