diff options
| -rw-r--r-- | drivers/mfd/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/mfd/ti-lmu.c | 17 | ||||
| -rw-r--r-- | include/linux/mfd/ti-lmu-register.h | 44 | ||||
| -rw-r--r-- | include/linux/mfd/ti-lmu.h | 1 |
4 files changed, 1 insertions, 63 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 294d9567cc71..8933485b28e7 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1336,7 +1336,7 @@ config MFD_TI_LMU help Say yes here to enable support for TI LMU chips. - TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697. + TI LMU MFD supports LM3532, LM3631, LM3632, LM3633, and LM3695. It consists of backlight, LED and regulator driver. It provides consistent device controls for lighting functions. diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c index b06cb908d1aa..89b1c5b584af 100644 --- a/drivers/mfd/ti-lmu.c +++ b/drivers/mfd/ti-lmu.c @@ -111,20 +111,6 @@ static const struct mfd_cell lm3695_devices[] = { }, }; -static const struct mfd_cell lm3697_devices[] = { - { - .name = "ti-lmu-backlight", - .id = LM3697, - .of_compatible = "ti,lm3697-backlight", - }, - /* Monitoring driver for open/short circuit detection */ - { - .name = "ti-lmu-fault-monitor", - .id = LM3697, - .of_compatible = "ti,lm3697-fault-monitor", - }, -}; - #define TI_LMU_DATA(chip, max_reg) \ static const struct ti_lmu_data chip##_data = \ { \ @@ -137,7 +123,6 @@ TI_LMU_DATA(lm3631, LM3631_MAX_REG); TI_LMU_DATA(lm3632, LM3632_MAX_REG); TI_LMU_DATA(lm3633, LM3633_MAX_REG); TI_LMU_DATA(lm3695, LM3695_MAX_REG); -TI_LMU_DATA(lm3697, LM3697_MAX_REG); static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) { @@ -206,7 +191,6 @@ static const struct of_device_id ti_lmu_of_match[] = { { .compatible = "ti,lm3632", .data = &lm3632_data }, { .compatible = "ti,lm3633", .data = &lm3633_data }, { .compatible = "ti,lm3695", .data = &lm3695_data }, - { .compatible = "ti,lm3697", .data = &lm3697_data }, { } }; MODULE_DEVICE_TABLE(of, ti_lmu_of_match); @@ -216,7 +200,6 @@ static const struct i2c_device_id ti_lmu_ids[] = { { "lm3632", LM3632 }, { "lm3633", LM3633 }, { "lm3695", LM3695 }, - { "lm3697", LM3697 }, { } }; MODULE_DEVICE_TABLE(i2c, ti_lmu_ids); diff --git a/include/linux/mfd/ti-lmu-register.h b/include/linux/mfd/ti-lmu-register.h index f09510561a55..76998b01764b 100644 --- a/include/linux/mfd/ti-lmu-register.h +++ b/include/linux/mfd/ti-lmu-register.h @@ -189,48 +189,4 @@ #define LM3695_REG_BRT_MSB 0x14 #define LM3695_MAX_REG 0x14 - -/* LM3697 */ -#define LM3697_REG_HVLED_OUTPUT_CFG 0x10 -#define LM3697_HVLED1_CFG_MASK BIT(0) -#define LM3697_HVLED2_CFG_MASK BIT(1) -#define LM3697_HVLED3_CFG_MASK BIT(2) -#define LM3697_HVLED1_CFG_SHIFT 0 -#define LM3697_HVLED2_CFG_SHIFT 1 -#define LM3697_HVLED3_CFG_SHIFT 2 - -#define LM3697_REG_BL0_RAMP 0x11 -#define LM3697_REG_BL1_RAMP 0x12 -#define LM3697_RAMPUP_MASK 0xF0 -#define LM3697_RAMPUP_SHIFT 4 -#define LM3697_RAMPDN_MASK 0x0F -#define LM3697_RAMPDN_SHIFT 0 - -#define LM3697_REG_RAMP_CONF 0x14 -#define LM3697_RAMP_MASK 0x0F -#define LM3697_RAMP_EACH 0x05 - -#define LM3697_REG_PWM_CFG 0x1C -#define LM3697_PWM_A_MASK BIT(0) -#define LM3697_PWM_B_MASK BIT(1) - -#define LM3697_REG_IMAX_A 0x17 -#define LM3697_REG_IMAX_B 0x18 - -#define LM3697_REG_FEEDBACK_ENABLE 0x19 - -#define LM3697_REG_BRT_A_LSB 0x20 -#define LM3697_REG_BRT_A_MSB 0x21 -#define LM3697_REG_BRT_B_LSB 0x22 -#define LM3697_REG_BRT_B_MSB 0x23 - -#define LM3697_REG_ENABLE 0x24 - -#define LM3697_REG_OPEN_FAULT_STATUS 0xB0 - -#define LM3697_REG_SHORT_FAULT_STATUS 0xB2 - -#define LM3697_REG_MONITOR_ENABLE 0xB4 - -#define LM3697_MAX_REG 0xB4 #endif diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h index 7762c1bce55d..54e9d272e81c 100644 --- a/include/linux/mfd/ti-lmu.h +++ b/include/linux/mfd/ti-lmu.h @@ -26,7 +26,6 @@ enum ti_lmu_id { LM3632, LM3633, LM3695, - LM3697, LMU_MAX_ID, }; |