diff options
| -rw-r--r-- | drivers/bluetooth/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/bluetooth/Makefile | 1 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_ldisc.c | 6 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_mrvl.c | 387 | ||||
| -rw-r--r-- | drivers/bluetooth/hci_uart.h | 8 |
5 files changed, 412 insertions, 1 deletions
diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig index 43e9f9328df8..3cc9bff9d99d 100644 --- a/drivers/bluetooth/Kconfig +++ b/drivers/bluetooth/Kconfig @@ -180,6 +180,17 @@ config BT_HCIUART_AG6XX Say Y here to compile support for Intel AG6XX protocol. +config BT_HCIUART_MRVL + bool "Marvell protocol support" + depends on BT_HCIUART + select BT_HCIUART_H4 + help + Marvell is serial protocol for communication between Bluetooth + device and host. This protocol is required for most Marvell Bluetooth + devices with UART interface. + + Say Y here to compile support for HCI MRVL protocol. + config BT_HCIBCM203X tristate "HCI BCM203x USB driver" depends on USB diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 3e92cfeb9ee2..b1fc29a697b7 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -38,6 +38,7 @@ hci_uart-$(CONFIG_BT_HCIUART_INTEL) += hci_intel.o hci_uart-$(CONFIG_BT_HCIUART_BCM) += hci_bcm.o hci_uart-$(CONFIG_BT_HCIUART_QCA) += hci_qca.o hci_uart-$(CONFIG_BT_HCIUART_AG6XX) += hci_ag6xx.o +hci_uart-$(CONFIG_BT_HCIUART_MRVL) += hci_mrvl.o hci_uart-objs := $(hci_uart-y) ccflags-y += -D__CHECK_ENDIAN__ diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c index dda97398c59a..9a3aab67b6bb 100644 --- a/drivers/bluetooth/hci_ldisc.c +++ b/drivers/bluetooth/hci_ldisc.c @@ -810,6 +810,9 @@ static int __init hci_uart_init(void) #ifdef CONFIG_BT_HCIUART_AG6XX ag6xx_init(); #endif +#ifdef CONFIG_BT_HCIUART_MRVL + mrvl_init(); +#endif return 0; } @@ -845,6 +848,9 @@ static void __exit hci_uart_exit(void) #ifdef CONFIG_BT_HCIUART_AG6XX ag6xx_deinit(); #endif +#ifdef CONFIG_BT_HCIUART_MRVL + mrvl_deinit(); +#endif /* Release tty registration of line discipline */ err = tty_unregister_ldisc(N_HCI); diff --git a/drivers/bluetooth/hci_mrvl.c b/drivers/bluetooth/hci_mrvl.c new file mode 100644 index 000000000000..bbc4b39b1dbf --- /dev/null +++ b/drivers/bluetooth/hci_mrvl.c @@ -0,0 +1,387 @@ +/* + * + * Bluetooth HCI UART driver for marvell devices + * + * Copyright (C) 2016 Marvell International Ltd. + * Copyright (C) 2016 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/skbuff.h> +#include <linux/firmware.h> +#include <linux/module.h> +#include <linux/tty.h> + +#include <net/bluetooth/bluetooth.h> +#include <net/bluetooth/hci_core.h> + +#include "hci_uart.h" + +#define HCI_FW_REQ_PKT 0xA5 +#define HCI_CHIP_VER_PKT 0xAA + +#define MRVL_ACK 0x5A +#define MRVL_NAK 0xBF +#define MRVL_RAW_DATA 0x1F + +enum { + STATE_CHIP_VER_PENDING, + STATE_FW_REQ_PENDING, +}; + +struct mrvl_data { + struct sk_buff *rx_skb; + struct sk_buff_head txq; + struct sk_buff_head rawq; + unsigned long flags; + unsigned int tx_len; + u8 id, rev; +}; + +struct hci_mrvl_pkt { + __le16 lhs; + __le16 rhs; +} __packed; +#define HCI_MRVL_PKT_SIZE 4 + +static int mrvl_open(struct hci_uart *hu) +{ + struct mrvl_data *mrvl; + + BT_DBG("hu %p", hu); + + mrvl = kzalloc(sizeof(*mrvl), GFP_KERNEL); + if (!mrvl) + return -ENOMEM; + + skb_queue_head_init(&mrvl->txq); + skb_queue_head_init(&mrvl->rawq); + + set_bit(STATE_CHIP_VER_PENDING, &mrvl->flags); + + hu->priv = mrvl; + return 0; +} + +static int mrvl_close(struct hci_uart *hu) +{ + struct mrvl_data *mrvl = hu->priv; + + BT_DBG("hu %p", hu); + + skb_queue_purge(&mrvl->txq); + skb_queue_purge(&mrvl->rawq); + kfree_skb(mrvl->rx_skb); + kfree(mrvl); + + hu->priv = NULL; + return 0; +} + +static int mrvl_flush(struct hci_uart *hu) +{ + struct mrvl_data *mrvl = hu->priv; + + BT_DBG("hu %p", hu); + + skb_queue_purge(&mrvl->txq); + skb_queue_purge(&mrvl->rawq); + + return 0; +} + +static struct sk_buff *mrvl_dequeue(struct hci_uart *hu) +{ + struct mrvl_data *mrvl = hu->priv; + struct sk_buff *skb; + + skb = skb_dequeue(&mrvl->txq); + if (!skb) { + /* Any raw data ? */ + skb = skb_dequeue(&mrvl->rawq); + } else { + /* Prepend skb with frame type */ + memcpy(skb_push(skb, 1), &bt_cb(skb)->pkt_type, 1); + } + + return skb; +} + +static int mrvl_enqueue(struct hci_uart *hu, struct sk_buff *skb) +{ + struct mrvl_data *mrvl = hu->priv; + + skb_queue_tail(&mrvl->txq, skb); + return 0; +} + +static void mrvl_send_ack(struct hci_uart *hu, unsigned char type) +{ + struct mrvl_data *mrvl = hu->priv; + struct sk_buff *skb; + + /* No H4 payload, only 1 byte header */ + skb = bt_skb_alloc(0, GFP_ATOMIC); + if (!skb) { + bt_dev_err(hu->hdev, "Unable to alloc ack/nak packet"); + return; + } + hci_skb_pkt_type(skb) = type; + + skb_queue_tail(&mrvl->txq, skb); + hci_uart_tx_wakeup(hu); +} + +static int mrvl_recv_fw_req(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct hci_mrvl_pkt *pkt = (void *)skb->data; + struct hci_uart *hu = hci_get_drvdata(hdev); + struct mrvl_data *mrvl = hu->priv; + int ret = 0; + + if ((pkt->lhs ^ pkt->rhs) != 0xffff) { + bt_dev_err(hdev, "Corrupted mrvl header"); + mrvl_send_ack(hu, MRVL_NAK); + ret = -EINVAL; + goto done; + } + mrvl_send_ack(hu, MRVL_ACK); + + if (!test_bit(STATE_FW_REQ_PENDING, &mrvl->flags)) { + bt_dev_err(hdev, "Received unexpected firmware request"); + ret = -EINVAL; + goto done; + } + + mrvl->tx_len = le16_to_cpu(pkt->lhs); + + clear_bit(STATE_FW_REQ_PENDING, &mrvl->flags); + smp_mb__after_atomic(); + wake_up_bit(&mrvl->flags, STATE_FW_REQ_PENDING); + +done: + kfree_skb(skb); + return ret; +} + +static int mrvl_recv_chip_ver(struct hci_dev *hdev, struct sk_buff *skb) +{ + struct hci_mrvl_pkt *pkt = (void *)skb->data; + struct hci_uart *hu = hci_get_drvdata(hdev); + struct mrvl_data *mrvl = hu->priv; + u16 version = le16_to_cpu(pkt->lhs); + int ret = 0; + + if ((pkt->lhs ^ pkt->rhs) != 0xffff) { + bt_dev_err(hdev, "Corrupted mrvl header"); + mrvl_send_ack(hu, MRVL_NAK); + ret = -EINVAL; + goto done; + } + mrvl_send_ack(hu, MRVL_ACK); + + if (!test_bit(STATE_CHIP_VER_PENDING, &mrvl->flags)) { + bt_dev_err(hdev, "Received unexpected chip version"); + goto done; + } + + mrvl->id = version; + mrvl->rev = version >> 8; + + bt_dev_info(hdev, "Controller id = %x, rev = %x", mrvl->id, mrvl->rev); + + clear_bit(STATE_CHIP_VER_PENDING, &mrvl->flags); + smp_mb__after_atomic(); + wake_up_bit(&mrvl->flags, STATE_CHIP_VER_PENDING); + +done: + kfree_skb(skb); + return ret; +} + +#define HCI_RECV_CHIP_VER \ + .type = HCI_CHIP_VER_PKT, \ + .hlen = HCI_MRVL_PKT_SIZE, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = HCI_MRVL_PKT_SIZE + +#define HCI_RECV_FW_REQ \ + .type = HCI_FW_REQ_PKT, \ + .hlen = HCI_MRVL_PKT_SIZE, \ + .loff = 0, \ + .lsize = 0, \ + .maxlen = HCI_MRVL_PKT_SIZE + +static const struct h4_recv_pkt mrvl_recv_pkts[] = { + { H4_RECV_ACL, .recv = hci_recv_frame }, + { H4_RECV_SCO, .recv = hci_recv_frame }, + { H4_RECV_EVENT, .recv = hci_recv_frame }, + { HCI_RECV_FW_REQ, .recv = mrvl_recv_fw_req }, + { HCI_RECV_CHIP_VER, .recv = mrvl_recv_chip_ver }, +}; + +static int mrvl_recv(struct hci_uart *hu, const void *data, int count) +{ + struct mrvl_data *mrvl = hu->priv; + + if (!test_bit(HCI_UART_REGISTERED, &hu->flags)) + return -EUNATCH; + + mrvl->rx_skb = h4_recv_buf(hu->hdev, mrvl->rx_skb, data, count, + mrvl_recv_pkts, + ARRAY_SIZE(mrvl_recv_pkts)); + if (IS_ERR(mrvl->rx_skb)) { + int err = PTR_ERR(mrvl->rx_skb); + bt_dev_err(hu->hdev, "Frame reassembly failed (%d)", err); + mrvl->rx_skb = NULL; + return err; + } + + return count; +} + +static int mrvl_load_firmware(struct hci_dev *hdev, const char *name) +{ + struct hci_uart *hu = hci_get_drvdata(hdev); + struct mrvl_data *mrvl = hu->priv; + const struct firmware *fw = NULL; + const u8 *fw_ptr, *fw_max; + int err; + + err = request_firmware(&fw, name, &hdev->dev); + if (err < 0) { + bt_dev_err(hdev, "Failed to load firmware file %s", name); + return err; + } + + fw_ptr = fw->data; + fw_max = fw->data + fw->size; + + bt_dev_info(hdev, "Loading %s", name); + + set_bit(STATE_FW_REQ_PENDING, &mrvl->flags); + + while (fw_ptr <= fw_max) { + struct sk_buff *skb; + + /* Controller drives the firmware load by sending firmware + * request packets containing the expected fragment size. + */ + err = wait_on_bit_timeout(&mrvl->flags, STATE_FW_REQ_PENDING, + TASK_INTERRUPTIBLE, + msecs_to_jiffies(2000)); + if (err == 1) { + bt_dev_err(hdev, "Firmware load interrupted"); + err = -EINTR; + break; + } else if (err) { + bt_dev_err(hdev, "Firmware request timeout"); + err = -ETIMEDOUT; + break; + } + + bt_dev_dbg(hdev, "Firmware request, expecting %d bytes", + mrvl->tx_len); + + if (fw_ptr == fw_max) { + /* Controller requests a null size once firmware is + * fully loaded. If controller expects more data, there + * is an issue. + */ + if (!mrvl->tx_len) { + bt_dev_info(hdev, "Firmware loading complete"); + } else { + bt_dev_err(hdev, "Firmware loading failure"); + err = -EINVAL; + } + break; + } + + if (fw_ptr + mrvl->tx_len > fw_max) { + mrvl->tx_len = fw_max - fw_ptr; + bt_dev_dbg(hdev, "Adjusting tx_len to %d", + mrvl->tx_len); + } + + skb = bt_skb_alloc(mrvl->tx_len, GFP_KERNEL); + if (!skb) { + bt_dev_err(hdev, "Failed to alloc mem for FW packet"); + err = -ENOMEM; + break; + } + bt_cb(skb)->pkt_type = MRVL_RAW_DATA; + + memcpy(skb_put(skb, mrvl->tx_len), fw_ptr, mrvl->tx_len); + fw_ptr += mrvl->tx_len; + + set_bit(STATE_FW_REQ_PENDING, &mrvl->flags); + + skb_queue_tail(&mrvl->rawq, skb); + hci_uart_tx_wakeup(hu); + } + + release_firmware(fw); + return err; +} + +static int mrvl_setup(struct hci_uart *hu) +{ + int err; + + hci_uart_set_flow_control(hu, true); + + err = mrvl_load_firmware(hu->hdev, "mrvl/helper_uart_3000000.bin"); + if (err) { + bt_dev_err(hu->hdev, "Unable to download firmware helper"); + return -EINVAL; + } + + hci_uart_set_baudrate(hu, 3000000); + hci_uart_set_flow_control(hu, false); + + err = mrvl_load_firmware(hu->hdev, "mrvl/uart8897_bt.bin"); + if (err) + return err; + + return 0; +} + +static const struct hci_uart_proto mrvl_proto = { + .id = HCI_UART_MRVL, + .name = "Marvell", + .init_speed = 115200, + .open = mrvl_open, + .close = mrvl_close, + .flush = mrvl_flush, + .setup = mrvl_setup, + .recv = mrvl_recv, + .enqueue = mrvl_enqueue, + .dequeue = mrvl_dequeue, +}; + +int __init mrvl_init(void) +{ + return hci_uart_register_proto(&mrvl_proto); +} + +int __exit mrvl_deinit(void) +{ + return hci_uart_unregister_proto(&mrvl_proto); +} diff --git a/drivers/bluetooth/hci_uart.h b/drivers/bluetooth/hci_uart.h index 22b7c58ae837..070139513e65 100644 --- a/drivers/bluetooth/hci_uart.h +++ b/drivers/bluetooth/hci_uart.h @@ -35,7 +35,7 @@ #define HCIUARTGETFLAGS _IOR('U', 204, int) /* UART protocols */ -#define HCI_UART_MAX_PROTO 11 +#define HCI_UART_MAX_PROTO 12 #define HCI_UART_H4 0 #define HCI_UART_BCSP 1 @@ -48,6 +48,7 @@ #define HCI_UART_QCA 8 #define HCI_UART_AG6XX 9 #define HCI_UART_NOKIA 10 +#define HCI_UART_MRVL 11 #define HCI_UART_RAW_DEVICE 0 #define HCI_UART_RESET_ON_INIT 1 @@ -190,3 +191,8 @@ int qca_deinit(void); int ag6xx_init(void); int ag6xx_deinit(void); #endif + +#ifdef CONFIG_BT_HCIUART_MRVL +int mrvl_init(void); +int mrvl_deinit(void); +#endif |