diff options
| -rw-r--r-- | Documentation/laptops/thinkpad-acpi.txt | 47 | ||||
| -rw-r--r-- | drivers/misc/thinkpad_acpi.c | 136 |
2 files changed, 176 insertions, 7 deletions
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index af1f2bcb6f66..73b80a7e9b03 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -876,28 +876,63 @@ The cmos command interface is prone to firmware split-brain problems, as in newer ThinkPads it is just a compatibility layer. Do not use it, it is exported just as a debug tool. -LED control -- /proc/acpi/ibm/led ---------------------------------- +LED control +----------- -Some of the LED indicators can be controlled through this feature. The -available commands are: +procfs: /proc/acpi/ibm/led +sysfs attributes: as per led class, see below for names + +Some of the LED indicators can be controlled through this feature. On +some older ThinkPad models, it is possible to query the status of the +LED indicators as well. Newer ThinkPads cannot query the real status +of the LED indicators. + +procfs notes: + +The available commands are: echo '<led number> on' >/proc/acpi/ibm/led echo '<led number> off' >/proc/acpi/ibm/led echo '<led number> blink' >/proc/acpi/ibm/led The <led number> range is 0 to 7. The set of LEDs that can be -controlled varies from model to model. Here is the mapping on the X40: +controlled varies from model to model. Here is the common ThinkPad +mapping: 0 - power 1 - battery (orange) 2 - battery (green) - 3 - UltraBase + 3 - UltraBase/dock 4 - UltraBay + 5 - UltraBase battery slot + 6 - (unknown) 7 - standby All of the above can be turned on and off and can be made to blink. +sysfs notes: + +The ThinkPad LED sysfs interface is described in detail by the led class +documentation, in Documentation/leds-class.txt. + +The leds are named (in LED ID order, from 0 to 7): +"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt", +"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt", +"tpacpi::unknown_led", "tpacpi::standby". + +Due to limitations in the sysfs led class, if the status of the LED +indicators cannot be read due to an error, thinkpad-acpi will report it as +a brightness of zero (same as LED off). + +If the thinkpad firmware doesn't support reading the current status, +trying to read the current LED brightness will just return whatever +brightness was last written to that attribute. + +These LEDs can blink using hardware acceleration. To request that a +ThinkPad indicator LED should blink in hardware accelerated mode, use the +"timer" trigger, and leave the delay_on and delay_off parameters set to +zero (to request hardware acceleration autodetection). + ACPI sounds -- /proc/acpi/ibm/beep ---------------------------------- diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 38a119bd931e..2ab3633f4e56 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -277,6 +277,7 @@ struct tpacpi_led_classdev { struct led_classdev led_classdev; struct work_struct work; enum led_brightness new_brightness; + unsigned int led; }; /**************************************************************************** @@ -3814,20 +3815,38 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */ "LED", /* all others */ ); /* R30, R31 */ +#define TPACPI_LED_NUMLEDS 8 +static struct tpacpi_led_classdev *tpacpi_leds; +static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS]; +static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = { + /* there's a limit of 19 chars + NULL before 2.6.26 */ + "tpacpi::power", + "tpacpi:orange:batt", + "tpacpi:green:batt", + "tpacpi::dock_active", + "tpacpi::bay_active", + "tpacpi::dock_batt", + "tpacpi::unknown_led", + "tpacpi::standby", +}; + static int led_get_status(unsigned int led) { int status; + enum led_status_t led_s; switch (led_supported) { case TPACPI_LED_570: if (!acpi_evalf(ec_handle, &status, "GLED", "dd", 1 << led)) return -EIO; - return (status == 0)? + led_s = (status == 0)? TPACPI_LED_OFF : ((status == 1)? TPACPI_LED_ON : TPACPI_LED_BLINK); + tpacpi_led_state_cache[led] = led_s; + return led_s; default: return -ENXIO; } @@ -3874,11 +3893,96 @@ static int led_set_status(unsigned int led, enum led_status_t ledstatus) rc = -ENXIO; } + if (!rc) + tpacpi_led_state_cache[led] = ledstatus; + return rc; } +static void led_sysfs_set_status(unsigned int led, + enum led_brightness brightness) +{ + led_set_status(led, + (brightness == LED_OFF) ? + TPACPI_LED_OFF : + (tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ? + TPACPI_LED_BLINK : TPACPI_LED_ON); +} + +static void led_set_status_worker(struct work_struct *work) +{ + struct tpacpi_led_classdev *data = + container_of(work, struct tpacpi_led_classdev, work); + + if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING)) + led_sysfs_set_status(data->led, data->new_brightness); +} + +static void led_sysfs_set(struct led_classdev *led_cdev, + enum led_brightness brightness) +{ + struct tpacpi_led_classdev *data = container_of(led_cdev, + struct tpacpi_led_classdev, led_classdev); + + data->new_brightness = brightness; + schedule_work(&data->work); +} + +static int led_sysfs_blink_set(struct led_classdev *led_cdev, + unsigned long *delay_on, unsigned long *delay_off) +{ + struct tpacpi_led_classdev *data = container_of(led_cdev, + struct tpacpi_led_classdev, led_classdev); + + /* Can we choose the flash rate? */ + if (*delay_on == 0 && *delay_off == 0) { + /* yes. set them to the hardware blink rate (1 Hz) */ + *delay_on = 500; /* ms */ + *delay_off = 500; /* ms */ + } else if ((*delay_on != 500) || (*delay_off != 500)) + return -EINVAL; + + data->new_brightness = TPACPI_LED_BLINK; + schedule_work(&data->work); + + return 0; +} + +static enum led_brightness led_sysfs_get(struct led_classdev *led_cdev) +{ + int rc; + + struct tpacpi_led_classdev *data = container_of(led_cdev, + struct tpacpi_led_classdev, led_classdev); + + rc = led_get_status(data->led); + + if (rc == TPACPI_LED_OFF || rc < 0) + rc = LED_OFF; /* no error handling in led class :( */ + else + rc = LED_FULL; + + return rc; +} + +static void led_exit(void) +{ + unsigned int i; + + for (i = 0; i < TPACPI_LED_NUMLEDS; i++) { + if (tpacpi_leds[i].led_classdev.name) + led_classdev_unregister(&tpacpi_leds[i].led_classdev); + } + + kfree(tpacpi_leds); + tpacpi_leds = NULL; +} + static int __init led_init(struct ibm_init_struct *iibm) { + unsigned int i; + int rc; + vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n"); TPACPI_ACPIHANDLE_INIT(led); @@ -3899,6 +4003,35 @@ static int __init led_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n", str_supported(led_supported), led_supported); + tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS, + GFP_KERNEL); + if (!tpacpi_leds) { + printk(TPACPI_ERR "Out of memory for LED data\n"); + return -ENOMEM; + } + + for (i = 0; i < TPACPI_LED_NUMLEDS; i++) { + tpacpi_leds[i].led = i; + + tpacpi_leds[i].led_classdev.brightness_set = &led_sysfs_set; + tpacpi_leds[i].led_classdev.blink_set = &led_sysfs_blink_set; + if (led_supported == TPACPI_LED_570) + tpacpi_leds[i].led_classdev.brightness_get = + &led_sysfs_get; + + tpacpi_leds[i].led_classdev.name = tpacpi_led_names[i]; + + INIT_WORK(&tpacpi_leds[i].work, led_set_status_worker); + + rc = led_classdev_register(&tpacpi_pdev->dev, + &tpacpi_leds[i].led_classdev); + if (rc < 0) { + tpacpi_leds[i].led_classdev.name = NULL; + led_exit(); + return rc; + } + } + return (led_supported != TPACPI_LED_NONE)? 0 : 1; } @@ -3969,6 +4102,7 @@ static struct ibm_struct led_driver_data = { .name = "led", .read = led_read, .write = led_write, + .exit = led_exit, }; /************************************************************************* |