diff options
| -rw-r--r-- | drivers/ata/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/ata/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ata/pata_samsung_cf.c | 662 | ||||
| -rw-r--r-- | include/linux/platform_data/ata-samsung_cf.h | 31 |
4 files changed, 0 insertions, 704 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index eceaec33af65..e4d9e39b08dd 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -1144,16 +1144,6 @@ config PATA_RZ1000 If unsure, say N. -config PATA_SAMSUNG_CF - tristate "Samsung SoC PATA support" - depends on SAMSUNG_DEV_IDE || COMPILE_TEST - select PATA_TIMINGS - help - This option enables basic support for Samsung's S3C/S5P board - PATA controllers via the new ATA layer - - If unsure, say N. - config PATA_WINBOND_VLB tristate "Winbond W83759A VLB PATA support (Experimental)" depends on ISA diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile index d2e36d367274..0a863e7f3c60 100644 --- a/drivers/ata/Makefile +++ b/drivers/ata/Makefile @@ -110,7 +110,6 @@ obj-$(CONFIG_PATA_PLATFORM) += pata_platform.o obj-$(CONFIG_PATA_OF_PLATFORM) += pata_of_platform.o obj-$(CONFIG_PATA_RB532) += pata_rb532_cf.o obj-$(CONFIG_PATA_RZ1000) += pata_rz1000.o -obj-$(CONFIG_PATA_SAMSUNG_CF) += pata_samsung_cf.o obj-$(CONFIG_PATA_PXA) += pata_pxa.o diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c deleted file mode 100644 index aba1536ddd44..000000000000 --- a/drivers/ata/pata_samsung_cf.c +++ /dev/null @@ -1,662 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * PATA driver for Samsung SoCs. - * Supports CF Interface in True IDE mode. Currently only PIO mode has been - * implemented; UDMA support has to be added. - * - * Based on: - * PATA driver for AT91SAM9260 Static Memory Controller - * PATA driver for Toshiba SCC controller -*/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/mod_devicetable.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/libata.h> -#include <linux/platform_device.h> -#include <linux/slab.h> - -#include <linux/platform_data/ata-samsung_cf.h> - -#define DRV_NAME "pata_samsung_cf" -#define DRV_VERSION "0.1" - -#define S3C_CFATA_REG(x) (x) -#define S3C_CFATA_MUX S3C_CFATA_REG(0x0) -#define S3C_ATA_CTRL S3C_CFATA_REG(0x0) -#define S3C_ATA_CMD S3C_CFATA_REG(0x8) -#define S3C_ATA_IRQ S3C_CFATA_REG(0x10) -#define S3C_ATA_IRQ_MSK S3C_CFATA_REG(0x14) -#define S3C_ATA_CFG S3C_CFATA_REG(0x18) - -#define S3C_ATA_PIO_TIME S3C_CFATA_REG(0x2c) -#define S3C_ATA_PIO_DTR S3C_CFATA_REG(0x54) -#define S3C_ATA_PIO_FED S3C_CFATA_REG(0x58) -#define S3C_ATA_PIO_SCR S3C_CFATA_REG(0x5c) -#define S3C_ATA_PIO_LLR S3C_CFATA_REG(0x60) -#define S3C_ATA_PIO_LMR S3C_CFATA_REG(0x64) -#define S3C_ATA_PIO_LHR S3C_CFATA_REG(0x68) -#define S3C_ATA_PIO_DVR S3C_CFATA_REG(0x6c) -#define S3C_ATA_PIO_CSD S3C_CFATA_REG(0x70) -#define S3C_ATA_PIO_DAD S3C_CFATA_REG(0x74) -#define S3C_ATA_PIO_RDATA S3C_CFATA_REG(0x7c) - -#define S3C_CFATA_MUX_TRUEIDE 0x01 -#define S3C_ATA_CFG_SWAP 0x40 -#define S3C_ATA_CFG_IORDYEN 0x02 - -enum s3c_cpu_type { - TYPE_S3C64XX, - TYPE_S5PV210, -}; - -/* - * struct s3c_ide_info - S3C PATA instance. - * @clk: The clock resource for this controller. - * @ide_addr: The area mapped for the hardware registers. - * @sfr_addr: The area mapped for the special function registers. - * @irq: The IRQ number we are using. - * @cpu_type: The exact type of this controller. - * @fifo_status_reg: The ATA_FIFO_STATUS register offset. - */ -struct s3c_ide_info { - struct clk *clk; - void __iomem *ide_addr; - void __iomem *sfr_addr; - int irq; - enum s3c_cpu_type cpu_type; - unsigned int fifo_status_reg; -}; - -static void pata_s3c_set_endian(void __iomem *s3c_ide_regbase, u8 mode) -{ - u32 reg = readl(s3c_ide_regbase + S3C_ATA_CFG); - reg = mode ? (reg & ~S3C_ATA_CFG_SWAP) : (reg | S3C_ATA_CFG_SWAP); - writel(reg, s3c_ide_regbase + S3C_ATA_CFG); -} - -static void pata_s3c_cfg_mode(void __iomem *s3c_ide_sfrbase) -{ - /* Select true-ide as the internal operating mode */ - writel(readl(s3c_ide_sfrbase + S3C_CFATA_MUX) | S3C_CFATA_MUX_TRUEIDE, - s3c_ide_sfrbase + S3C_CFATA_MUX); -} - -static unsigned long -pata_s3c_setup_timing(struct s3c_ide_info *info, const struct ata_timing *ata) -{ - int t1 = ata->setup; - int t2 = ata->act8b; - int t2i = ata->rec8b; - ulong piotime; - - piotime = ((t2i & 0xff) << 12) | ((t2 & 0xff) << 4) | (t1 & 0xf); - - return piotime; -} - -static void pata_s3c_set_piomode(struct ata_port *ap, struct ata_device *adev) -{ - struct s3c_ide_info *info = ap->host->private_data; - struct ata_timing timing; - int cycle_time; - ulong ata_cfg = readl(info->ide_addr + S3C_ATA_CFG); - ulong piotime; - - /* Enables IORDY if mode requires it */ - if (ata_pio_need_iordy(adev)) - ata_cfg |= S3C_ATA_CFG_IORDYEN; - else - ata_cfg &= ~S3C_ATA_CFG_IORDYEN; - - cycle_time = (int)(1000000000UL / clk_get_rate(info->clk)); - - ata_timing_compute(adev, adev->pio_mode, &timing, - cycle_time * 1000, 0); - - piotime = pata_s3c_setup_timing(info, &timing); - - writel(ata_cfg, info->ide_addr + S3C_ATA_CFG); - writel(piotime, info->ide_addr + S3C_ATA_PIO_TIME); -} - -/* - * Waits until the IDE controller is able to perform next read/write - * operation to the disk. Needed for 64XX series boards only. - */ -static int wait_for_host_ready(struct s3c_ide_info *info) -{ - ulong timeout; - void __iomem *fifo_reg = info->ide_addr + info->fifo_status_reg; - - /* wait for maximum of 20 msec */ - timeout = jiffies + msecs_to_jiffies(20); - while (time_before(jiffies, timeout)) { - if ((readl(fifo_reg) >> 28) == 0) - return 0; - } - return -EBUSY; -} - -/* - * Writes to one of the task file registers. - */ -static void ata_outb(struct ata_host *host, u8 addr, void __iomem *reg) -{ - struct s3c_ide_info *info = host->private_data; - - wait_for_host_ready(info); - writeb(addr, reg); -} - -/* - * Reads from one of the task file registers. - */ -static u8 ata_inb(struct ata_host *host, void __iomem *reg) -{ - struct s3c_ide_info *info = host->private_data; - u8 temp; - - wait_for_host_ready(info); - (void) readb(reg); - wait_for_host_ready(info); - temp = readb(info->ide_addr + S3C_ATA_PIO_RDATA); - return temp; -} - -/* - * pata_s3c_tf_load - send taskfile registers to host controller - */ -static void pata_s3c_tf_load(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; - - if (tf->ctl != ap->last_ctl) { - ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - ata_wait_idle(ap); - } - - if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { - ata_outb(ap->host, tf->hob_feature, ioaddr->feature_addr); - ata_outb(ap->host, tf->hob_nsect, ioaddr->nsect_addr); - ata_outb(ap->host, tf->hob_lbal, ioaddr->lbal_addr); - ata_outb(ap->host, tf->hob_lbam, ioaddr->lbam_addr); - ata_outb(ap->host, tf->hob_lbah, ioaddr->lbah_addr); - } - - if (is_addr) { - ata_outb(ap->host, tf->feature, ioaddr->feature_addr); - ata_outb(ap->host, tf->nsect, ioaddr->nsect_addr); - ata_outb(ap->host, tf->lbal, ioaddr->lbal_addr); - ata_outb(ap->host, tf->lbam, ioaddr->lbam_addr); - ata_outb(ap->host, tf->lbah, ioaddr->lbah_addr); - } - - if (tf->flags & ATA_TFLAG_DEVICE) - ata_outb(ap->host, tf->device, ioaddr->device_addr); - - ata_wait_idle(ap); -} - -/* - * pata_s3c_tf_read - input device's ATA taskfile shadow registers - */ -static void pata_s3c_tf_read(struct ata_port *ap, struct ata_taskfile *tf) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - tf->error = ata_inb(ap->host, ioaddr->error_addr); - tf->nsect = ata_inb(ap->host, ioaddr->nsect_addr); - tf->lbal = ata_inb(ap->host, ioaddr->lbal_addr); - tf->lbam = ata_inb(ap->host, ioaddr->lbam_addr); - tf->lbah = ata_inb(ap->host, ioaddr->lbah_addr); - tf->device = ata_inb(ap->host, ioaddr->device_addr); - - if (tf->flags & ATA_TFLAG_LBA48) { - ata_outb(ap->host, tf->ctl | ATA_HOB, ioaddr->ctl_addr); - tf->hob_feature = ata_inb(ap->host, ioaddr->error_addr); - tf->hob_nsect = ata_inb(ap->host, ioaddr->nsect_addr); - tf->hob_lbal = ata_inb(ap->host, ioaddr->lbal_addr); - tf->hob_lbam = ata_inb(ap->host, ioaddr->lbam_addr); - tf->hob_lbah = ata_inb(ap->host, ioaddr->lbah_addr); - ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr); - ap->last_ctl = tf->ctl; - } -} - -/* - * pata_s3c_exec_command - issue ATA command to host controller - */ -static void pata_s3c_exec_command(struct ata_port *ap, - const struct ata_taskfile *tf) -{ - ata_outb(ap->host, tf->command, ap->ioaddr.command_addr); - ata_sff_pause(ap); -} - -/* - * pata_s3c_check_status - Read device status register - */ -static u8 pata_s3c_check_status(struct ata_port *ap) -{ - return ata_inb(ap->host, ap->ioaddr.status_addr); -} - -/* - * pata_s3c_check_altstatus - Read alternate device status register - */ -static u8 pata_s3c_check_altstatus(struct ata_port *ap) -{ - return ata_inb(ap->host, ap->ioaddr.altstatus_addr); -} - -/* - * pata_s3c_data_xfer - Transfer data by PIO - */ -static unsigned int pata_s3c_data_xfer(struct ata_queued_cmd *qc, - unsigned char *buf, unsigned int buflen, int rw) -{ - struct ata_port *ap = qc->dev->link->ap; - struct s3c_ide_info *info = ap->host->private_data; - void __iomem *data_addr = ap->ioaddr.data_addr; - unsigned int words = buflen >> 1, i; - u16 *data_ptr = (u16 *)buf; - - /* Requires wait same as in ata_inb/ata_outb */ - if (rw == READ) - for (i = 0; i < words; i++, data_ptr++) { - wait_for_host_ready(info); - (void) readw(data_addr); - wait_for_host_ready(info); - *data_ptr = readw(info->ide_addr - + S3C_ATA_PIO_RDATA); - } - else - for (i = 0; i < words; i++, data_ptr++) { - wait_for_host_ready(info); - writew(*data_ptr, data_addr); - } - - if (buflen & 0x01) - dev_err(ap->dev, "unexpected trailing data\n"); - - return words << 1; -} - -/* - * pata_s3c_dev_select - Select device on ATA bus - */ -static void pata_s3c_dev_select(struct ata_port *ap, unsigned int device) -{ - u8 tmp = ATA_DEVICE_OBS; - - if (device != 0) - tmp |= ATA_DEV1; - - ata_outb(ap->host, tmp, ap->ioaddr.device_addr); - ata_sff_pause(ap); -} - -/* - * pata_s3c_devchk - PATA device presence detection - */ -static bool pata_s3c_devchk(struct ata_port *ap, unsigned int device) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - u8 nsect, lbal; - - pata_s3c_dev_select(ap, device); - - ata_outb(ap->host, 0x55, ioaddr->nsect_addr); - ata_outb(ap->host, 0xaa, ioaddr->lbal_addr); - - ata_outb(ap->host, 0xaa, ioaddr->nsect_addr); - ata_outb(ap->host, 0x55, ioaddr->lbal_addr); - - ata_outb(ap->host, 0x55, ioaddr->nsect_addr); - ata_outb(ap->host, 0xaa, ioaddr->lbal_addr); - - nsect = ata_inb(ap->host, ioaddr->nsect_addr); - lbal = ata_inb(ap->host, ioaddr->lbal_addr); - - if ((nsect == 0x55) && (lbal == 0xaa)) - return true; /* we found a device */ - - return false; /* nothing found */ -} - -/* - * pata_s3c_wait_after_reset - wait for devices to become ready after reset - */ -static int pata_s3c_wait_after_reset(struct ata_link *link, - unsigned long deadline) -{ - int rc; - - ata_msleep(link->ap, ATA_WAIT_AFTER_RESET); - - /* always check readiness of the master device */ - rc = ata_sff_wait_ready(link, deadline); - /* -ENODEV means the odd clown forgot the D7 pulldown resistor - * and TF status is 0xff, bail out on it too. - */ - if (rc) - return rc; - - return 0; -} - -/* - * pata_s3c_bus_softreset - PATA device software reset - */ -static int pata_s3c_bus_softreset(struct ata_port *ap, - unsigned long deadline) -{ - struct ata_ioports *ioaddr = &ap->ioaddr; - - /* software reset. causes dev0 to be selected */ - ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr); - udelay(20); - ata_outb(ap->host, ap->ctl | ATA_SRST, ioaddr->ctl_addr); - udelay(20); - ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr); - ap->last_ctl = ap->ctl; - - return pata_s3c_wait_after_reset(&ap->link, deadline); -} - -/* - * pata_s3c_softreset - reset host port via ATA SRST - */ -static int pata_s3c_softreset(struct ata_link *link, unsigned int *classes, - unsigned long deadline) -{ - struct ata_port *ap = link->ap; - unsigned int devmask = 0; - int rc; - u8 err; - - /* determine if device 0 is present */ - if (pata_s3c_devchk(ap, 0)) - devmask |= (1 << 0); - - /* select device 0 again */ - pata_s3c_dev_select(ap, 0); - - /* issue bus reset */ - rc = pata_s3c_bus_softreset(ap, deadline); - /* if link is occupied, -ENODEV too is an error */ - if (rc && rc != -ENODEV) { - ata_link_err(link, "SRST failed (errno=%d)\n", rc); - return rc; - } - - /* determine by signature whether we have ATA or ATAPI devices */ - classes[0] = ata_sff_dev_classify(&ap->link.device[0], - devmask & (1 << 0), &err); - - return 0; -} - -/* - * pata_s3c_set_devctl - Write device control register - */ -static void pata_s3c_set_devctl(struct ata_port *ap, u8 ctl) -{ - ata_outb(ap->host, ctl, ap->ioaddr.ctl_addr); -} - -static struct scsi_host_template pata_s3c_sht = { - ATA_PIO_SHT(DRV_NAME), -}; - -static struct ata_port_operations pata_s3c_port_ops = { - .inherits = &ata_sff_port_ops, - .sff_check_status = pata_s3c_check_status, - .sff_check_altstatus = pata_s3c_check_altstatus, - .sff_tf_load = pata_s3c_tf_load, - .sff_tf_read = pata_s3c_tf_read, - .sff_data_xfer = pata_s3c_data_xfer, - .sff_exec_command = pata_s3c_exec_command, - .sff_dev_select = pata_s3c_dev_select, - .sff_set_devctl = pata_s3c_set_devctl, - .softreset = pata_s3c_softreset, - .set_piomode = pata_s3c_set_piomode, -}; - -static struct ata_port_operations pata_s5p_port_ops = { - .inherits = &ata_sff_port_ops, - .set_piomode = pata_s3c_set_piomode, -}; - -static void pata_s3c_enable(void __iomem *s3c_ide_regbase, bool state) -{ - u32 temp = readl(s3c_ide_regbase + S3C_ATA_CTRL); - temp = state ? (temp | 1) : (temp & ~1); - writel(temp, s3c_ide_regbase + S3C_ATA_CTRL); -} - -static irqreturn_t pata_s3c_irq(int irq, void *dev_instance) -{ - struct ata_host *host = dev_instance; - struct s3c_ide_info *info = host->private_data; - u32 reg; - - reg = readl(info->ide_addr + S3C_ATA_IRQ); - writel(reg, info->ide_addr + S3C_ATA_IRQ); - - return ata_sff_interrupt(irq, dev_instance); -} - -static void pata_s3c_hwinit(struct s3c_ide_info *info, - struct s3c_ide_platdata *pdata) -{ - switch (info->cpu_type) { - case TYPE_S3C64XX: - /* Configure as big endian */ - pata_s3c_cfg_mode(info->sfr_addr); - pata_s3c_set_endian(info->ide_addr, 1); - pata_s3c_enable(info->ide_addr, true); - msleep(100); - - /* Remove IRQ Status */ - writel(0x1f, info->ide_addr + S3C_ATA_IRQ); - writel(0x1b, info->ide_addr + S3C_ATA_IRQ_MSK); - break; - - case TYPE_S5PV210: - /* Configure as little endian */ - pata_s3c_set_endian(info->ide_addr, 0); - pata_s3c_enable(info->ide_addr, true); - msleep(100); - - /* Remove IRQ Status */ - writel(0x3f, info->ide_addr + S3C_ATA_IRQ); - writel(0x3f, info->ide_addr + S3C_ATA_IRQ_MSK); - break; - - default: - BUG(); - } -} - -static int __init pata_s3c_probe(struct platform_device *pdev) -{ - struct s3c_ide_platdata *pdata = dev_get_platdata(&pdev->dev); - struct device *dev = &pdev->dev; - struct s3c_ide_info *info; - struct resource *res; - struct ata_port *ap; - struct ata_host *host; - enum s3c_cpu_type cpu_type; - int ret; - - cpu_type = platform_get_device_id(pdev)->driver_data; - - info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL); - if (!info) - return -ENOMEM; - - info->irq = platform_get_irq(pdev, 0); - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - info->ide_addr = devm_ioremap_resource(dev, res); - if (IS_ERR(info->ide_addr)) - return PTR_ERR(info->ide_addr); - - info->clk = devm_clk_get(&pdev->dev, "cfcon"); - if (IS_ERR(info->clk)) { - dev_err(dev, "failed to get access to cf controller clock\n"); - ret = PTR_ERR(info->clk); - info->clk = NULL; - return ret; - } - - clk_enable(info->clk); - - /* init ata host */ - host = ata_host_alloc(dev, 1); - if (!host) { - dev_err(dev, "failed to allocate ide host\n"); - ret = -ENOMEM; - goto stop_clk; - } - - ap = host->ports[0]; - ap->pio_mask = ATA_PIO4; - - if (cpu_type == TYPE_S3C64XX) { - ap->ops = &pata_s3c_port_ops; - info->sfr_addr = info->ide_addr + 0x1800; - info->ide_addr += 0x1900; - info->fifo_status_reg = 0x94; - } else { - ap->ops = &pata_s5p_port_ops; - info->fifo_status_reg = 0x84; - } - - info->cpu_type = cpu_type; - - if (info->irq <= 0) { - ap->flags |= ATA_FLAG_PIO_POLLING; - info->irq = 0; - ata_port_desc(ap, "no IRQ, using PIO polling\n"); - } - - ap->ioaddr.cmd_addr = info->ide_addr + S3C_ATA_CMD; - ap->ioaddr.data_addr = info->ide_addr + S3C_ATA_PIO_DTR; - ap->ioaddr.error_addr = info->ide_addr + S3C_ATA_PIO_FED; - ap->ioaddr.feature_addr = info->ide_addr + S3C_ATA_PIO_FED; - ap->ioaddr.nsect_addr = info->ide_addr + S3C_ATA_PIO_SCR; - ap->ioaddr.lbal_addr = info->ide_addr + S3C_ATA_PIO_LLR; - ap->ioaddr.lbam_addr = info->ide_addr + S3C_ATA_PIO_LMR; - ap->ioaddr.lbah_addr = info->ide_addr + S3C_ATA_PIO_LHR; - ap->ioaddr.device_addr = info->ide_addr + S3C_ATA_PIO_DVR; - ap->ioaddr.status_addr = info->ide_addr + S3C_ATA_PIO_CSD; - ap->ioaddr.command_addr = info->ide_addr + S3C_ATA_PIO_CSD; - ap->ioaddr.altstatus_addr = info->ide_addr + S3C_ATA_PIO_DAD; - ap->ioaddr.ctl_addr = info->ide_addr + S3C_ATA_PIO_DAD; - - ata_port_desc(ap, "mmio cmd 0x%llx ", - (unsigned long long)res->start); - - host->private_data = info; - - if (pdata && pdata->setup_gpio) - pdata->setup_gpio(); - - /* Set endianness and enable the interface */ - pata_s3c_hwinit(info, pdata); - - ret = ata_host_activate(host, info->irq, - info->irq ? pata_s3c_irq : NULL, - 0, &pata_s3c_sht); - if (ret) - goto stop_clk; - - return 0; - -stop_clk: - clk_disable(info->clk); - return ret; -} - -static int __exit pata_s3c_remove(struct platform_device *pdev) -{ - struct ata_host *host = platform_get_drvdata(pdev); - struct s3c_ide_info *info = host->private_data; - - ata_host_detach(host); - - clk_disable(info->clk); - - return 0; -} - -#ifdef CONFIG_PM_SLEEP -static int pata_s3c_suspend(struct device *dev) -{ - struct ata_host *host = dev_get_drvdata(dev); - - ata_host_suspend(host, PMSG_SUSPEND); - return 0; -} - -static int pata_s3c_resume(struct device *dev) -{ - struct ata_host *host = dev_get_drvdata(dev); - struct s3c_ide_platdata *pdata = dev_get_platdata(dev); - struct s3c_ide_info *info = host->private_data; - - pata_s3c_hwinit(info, pdata); - ata_host_resume(host); - - return 0; -} - -static const struct dev_pm_ops pata_s3c_pm_ops = { - .suspend = pata_s3c_suspend, - .resume = pata_s3c_resume, -}; -#endif - -/* driver device registration */ -static const struct platform_device_id pata_s3c_driver_ids[] = { - { - .name = "s3c64xx-pata", - .driver_data = TYPE_S3C64XX, - }, { - .name = "s5pv210-pata", - .driver_data = TYPE_S5PV210, - }, - { } -}; - -MODULE_DEVICE_TABLE(platform, pata_s3c_driver_ids); - -static struct platform_driver pata_s3c_driver = { - .remove = __exit_p(pata_s3c_remove), - .id_table = pata_s3c_driver_ids, - .driver = { - .name = DRV_NAME, -#ifdef CONFIG_PM_SLEEP - .pm = &pata_s3c_pm_ops, -#endif - }, -}; - -module_platform_driver_probe(pata_s3c_driver, pata_s3c_probe); - -MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>"); -MODULE_DESCRIPTION("low-level driver for Samsung PATA controller"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VERSION); diff --git a/include/linux/platform_data/ata-samsung_cf.h b/include/linux/platform_data/ata-samsung_cf.h deleted file mode 100644 index fccf969dc4da..000000000000 --- a/include/linux/platform_data/ata-samsung_cf.h +++ /dev/null @@ -1,31 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Samsung CF-ATA platform_device info -*/ - -#ifndef __ATA_SAMSUNG_CF_H -#define __ATA_SAMSUNG_CF_H __FILE__ - -/** - * struct s3c_ide_platdata - S3C IDE driver platform data. - * @setup_gpio: Setup the external GPIO pins to the right state for data - * transfer in true-ide mode. - */ -struct s3c_ide_platdata { - void (*setup_gpio)(void); -}; - -/* - * s3c_ide_set_platdata() - Setup the platform specifc data for IDE driver. - * @pdata: Platform data for IDE driver. - */ -extern void s3c_ide_set_platdata(struct s3c_ide_platdata *pdata); - -/* architecture-specific IDE configuration */ -extern void s3c64xx_ide_setup_gpio(void); -extern void s5pv210_ide_setup_gpio(void); - -#endif /*__ATA_SAMSUNG_CF_H */ |