diff options
| -rw-r--r-- | drivers/virtio/Kconfig | 10 | ||||
| -rw-r--r-- | drivers/virtio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/virtio/virtio_pci_common.c | 10 | ||||
| -rw-r--r-- | drivers/virtio/virtio_pci_common.h | 9 | ||||
| -rw-r--r-- | drivers/virtio/virtio_pci_legacy.c | 101 | ||||
| -rw-r--r-- | drivers/virtio/virtio_pci_legacy_dev.c | 220 | ||||
| -rw-r--r-- | include/linux/virtio_pci_legacy.h | 42 |
7 files changed, 310 insertions, 83 deletions
diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index ce1b3f6ec325..8fcf94cd2c96 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -20,6 +20,15 @@ config VIRTIO_PCI_LIB PCI device with possible vendor specific extensions. Any module that selects this module must depend on PCI. +config VIRTIO_PCI_LIB_LEGACY + tristate + help + Legacy PCI device (Virtio PCI Card 0.9.x Draft and older device) + implementation. + This module implements the basic probe and control for devices + which are based on legacy PCI device. Any module that selects this + module must depend on PCI. + menuconfig VIRTIO_MENU bool "Virtio drivers" default y @@ -43,6 +52,7 @@ config VIRTIO_PCI_LEGACY bool "Support for legacy virtio draft 0.9.X and older devices" default y depends on VIRTIO_PCI + select VIRTIO_PCI_LIB_LEGACY help Virtio PCI Card 0.9.X Draft (circa 2014) and older device support. diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile index 699bbea0465f..0a82d0873248 100644 --- a/drivers/virtio/Makefile +++ b/drivers/virtio/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o obj-$(CONFIG_VIRTIO_PCI_LIB) += virtio_pci_modern_dev.o +obj-$(CONFIG_VIRTIO_PCI_LIB_LEGACY) += virtio_pci_legacy_dev.o obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o diff --git a/drivers/virtio/virtio_pci_common.c b/drivers/virtio/virtio_pci_common.c index b35bb2d57f62..d724f676608b 100644 --- a/drivers/virtio/virtio_pci_common.c +++ b/drivers/virtio/virtio_pci_common.c @@ -549,6 +549,8 @@ static int virtio_pci_probe(struct pci_dev *pci_dev, pci_set_master(pci_dev); + vp_dev->is_legacy = vp_dev->ldev.ioaddr ? true : false; + rc = register_virtio_device(&vp_dev->vdev); reg_dev = vp_dev; if (rc) @@ -557,10 +559,10 @@ static int virtio_pci_probe(struct pci_dev *pci_dev, return 0; err_register: - if (vp_dev->ioaddr) - virtio_pci_legacy_remove(vp_dev); + if (vp_dev->is_legacy) + virtio_pci_legacy_remove(vp_dev); else - virtio_pci_modern_remove(vp_dev); + virtio_pci_modern_remove(vp_dev); err_probe: pci_disable_device(pci_dev); err_enable_device: @@ -587,7 +589,7 @@ static void virtio_pci_remove(struct pci_dev *pci_dev) unregister_virtio_device(&vp_dev->vdev); - if (vp_dev->ioaddr) + if (vp_dev->is_legacy) virtio_pci_legacy_remove(vp_dev); else virtio_pci_modern_remove(vp_dev); diff --git a/drivers/virtio/virtio_pci_common.h b/drivers/virtio/virtio_pci_common.h index beec047a8f8d..eb17a29fc7ef 100644 --- a/drivers/virtio/virtio_pci_common.h +++ b/drivers/virtio/virtio_pci_common.h @@ -25,6 +25,7 @@ #include <linux/virtio_config.h> #include <linux/virtio_ring.h> #include <linux/virtio_pci.h> +#include <linux/virtio_pci_legacy.h> #include <linux/virtio_pci_modern.h> #include <linux/highmem.h> #include <linux/spinlock.h> @@ -44,16 +45,14 @@ struct virtio_pci_vq_info { struct virtio_pci_device { struct virtio_device vdev; struct pci_dev *pci_dev; + struct virtio_pci_legacy_device ldev; struct virtio_pci_modern_device mdev; - /* In legacy mode, these two point to within ->legacy. */ + bool is_legacy; + /* Where to read and clear interrupt */ u8 __iomem *isr; - /* Legacy only field */ - /* the IO mapping for the PCI config space */ - void __iomem *ioaddr; - /* a list of queues so we can dispatch IRQs */ spinlock_t lock; struct list_head virtqueues; diff --git a/drivers/virtio/virtio_pci_legacy.c b/drivers/virtio/virtio_pci_legacy.c index d62e9835aeec..82eb437ad920 100644 --- a/drivers/virtio/virtio_pci_legacy.c +++ b/drivers/virtio/virtio_pci_legacy.c @@ -14,6 +14,7 @@ * Michael S. Tsirkin <mst@redhat.com> */ +#include "linux/virtio_pci_legacy.h" #include "virtio_pci_common.h" /* virtio config->get_features() implementation */ @@ -23,7 +24,7 @@ static u64 vp_get_features(struct virtio_device *vdev) /* When someone needs more than 32 feature bits, we'll need to * steal a bit to indicate that the rest are somewhere else. */ - return ioread32(vp_dev->ioaddr + VIRTIO_PCI_HOST_FEATURES); + return vp_legacy_get_features(&vp_dev->ldev); } /* virtio config->finalize_features() implementation */ @@ -38,7 +39,7 @@ static int vp_finalize_features(struct virtio_device *vdev) BUG_ON((u32)vdev->features != vdev->features); /* We only support 32 feature bits. */ - iowrite32(vdev->features, vp_dev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); + vp_legacy_set_features(&vp_dev->ldev, vdev->features); return 0; } @@ -48,7 +49,7 @@ static void vp_get(struct virtio_device *vdev, unsigned offset, void *buf, unsigned len) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); - void __iomem *ioaddr = vp_dev->ioaddr + + void __iomem *ioaddr = vp_dev->ldev.ioaddr + VIRTIO_PCI_CONFIG_OFF(vp_dev->msix_enabled) + offset; u8 *ptr = buf; @@ -64,7 +65,7 @@ static void vp_set(struct virtio_device *vdev, unsigned offset, const void *buf, unsigned len) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); - void __iomem *ioaddr = vp_dev->ioaddr + + void __iomem *ioaddr = vp_dev->ldev.ioaddr + VIRTIO_PCI_CONFIG_OFF(vp_dev->msix_enabled) + offset; const u8 *ptr = buf; @@ -78,7 +79,7 @@ static void vp_set(struct virtio_device *vdev, unsigned offset, static u8 vp_get_status(struct virtio_device *vdev) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); - return ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS); + return vp_legacy_get_status(&vp_dev->ldev); } static void vp_set_status(struct virtio_device *vdev, u8 status) @@ -86,28 +87,24 @@ static void vp_set_status(struct virtio_device *vdev, u8 status) struct virtio_pci_device *vp_dev = to_vp_device(vdev); /* We should never be setting status to 0. */ BUG_ON(status == 0); - iowrite8(status, vp_dev->ioaddr + VIRTIO_PCI_STATUS); + vp_legacy_set_status(&vp_dev->ldev, status); } static void vp_reset(struct virtio_device *vdev) { struct virtio_pci_device *vp_dev = to_vp_device(vdev); /* 0 status means a reset. */ - iowrite8(0, vp_dev->ioaddr + VIRTIO_PCI_STATUS); + vp_legacy_set_status(&vp_dev->ldev, 0); /* Flush out the status write, and flush in device writes, * including MSi-X interrupts, if any. */ - ioread8(vp_dev->ioaddr + VIRTIO_PCI_STATUS); + vp_legacy_get_status(&vp_dev->ldev); /* Flush pending VQ/configuration callbacks. */ vp_synchronize_vectors(vdev); } static u16 vp_config_vector(struct virtio_pci_device *vp_dev, u16 vector) { - /* Setup the vector used for configuration events */ - iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); - /* Verify we had enough resources to assign the vector */ - /* Will also flush the write out to device */ - return ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); + return vp_legacy_config_vector(&vp_dev->ldev, vector); } static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, @@ -123,12 +120,9 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, int err; u64 q_pfn; - /* Select the queue we're interested in */ - iowrite16(index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL); - /* Check if queue is either not available or already active. */ - num = ioread16(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NUM); - if (!num || ioread32(vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN)) + num = vp_legacy_get_queue_size(&vp_dev->ldev, index); + if (!num || vp_legacy_get_queue_enable(&vp_dev->ldev, index)) return ERR_PTR(-ENOENT); info->msix_vector = msix_vec; @@ -151,13 +145,12 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, } /* activate the queue */ - iowrite32(q_pfn, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN); + vp_legacy_set_queue_address(&vp_dev->ldev, index, q_pfn); - vq->priv = (void __force *)vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY; + vq->priv = (void __force *)vp_dev->ldev.ioaddr + VIRTIO_PCI_QUEUE_NOTIFY; if (msix_vec != VIRTIO_MSI_NO_VECTOR) { - iowrite16(msix_vec, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); - msix_vec = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); + msix_vec = vp_legacy_queue_vector(&vp_dev->ldev, index, msix_vec); if (msix_vec == VIRTIO_MSI_NO_VECTOR) { err = -EBUSY; goto out_deactivate; @@ -167,7 +160,7 @@ static struct virtqueue *setup_vq(struct virtio_pci_device *vp_dev, return vq; out_deactivate: - iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN); + vp_legacy_set_queue_address(&vp_dev->ldev, index, 0); out_del_vq: vring_del_virtqueue(vq); return ERR_PTR(err); @@ -178,17 +171,15 @@ static void del_vq(struct virtio_pci_vq_info *info) struct virtqueue *vq = info->vq; struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev); - iowrite16(vq->index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL); - if (vp_dev->msix_enabled) { - iowrite16(VIRTIO_MSI_NO_VECTOR, - vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); + vp_legacy_queue_vector(&vp_dev->ldev, vq->index, + VIRTIO_MSI_NO_VECTOR); /* Flush the write out to device */ - ioread8(vp_dev->ioaddr + VIRTIO_PCI_ISR); + ioread8(vp_dev->ldev.ioaddr + VIRTIO_PCI_ISR); } /* Select and deactivate the queue */ - iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN); + vp_legacy_set_queue_address(&vp_dev->ldev, vq->index, 0); vring_del_virtqueue(vq); } @@ -211,51 +202,18 @@ static const struct virtio_config_ops virtio_pci_config_ops = { /* the PCI probing function */ int virtio_pci_legacy_probe(struct virtio_pci_device *vp_dev) { + struct virtio_pci_legacy_device *ldev = &vp_dev->ldev; struct pci_dev *pci_dev = vp_dev->pci_dev; int rc; - /* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */ - if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f) - return -ENODEV; - - if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) { - printk(KERN_ERR "virtio_pci: expected ABI version %d, got %d\n", - VIRTIO_PCI_ABI_VERSION, pci_dev->revision); - return -ENODEV; - } - - rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64)); - if (rc) { - rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)); - } else { - /* - * The virtio ring base address is expressed as a 32-bit PFN, - * with a page size of 1 << VIRTIO_PCI_QUEUE_ADDR_SHIFT. - */ - dma_set_coherent_mask(&pci_dev->dev, - DMA_BIT_MASK(32 + VIRTIO_PCI_QUEUE_ADDR_SHIFT)); - } - - if (rc) - dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n"); + ldev->pci_dev = pci_dev; - rc = pci_request_region(pci_dev, 0, "virtio-pci-legacy"); + rc = vp_legacy_probe(ldev); if (rc) return rc; - rc = -ENOMEM; - vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0); - if (!vp_dev->ioaddr) - goto err_iomap; - - vp_dev->isr = vp_dev->ioaddr + VIRTIO_PCI_ISR; - - /* we use the subsystem vendor/device id as the virtio vendor/device - * id. this allows us to use the same PCI vendor/device id for all - * virtio devices and to identify the particular virtio driver by - * the subsystem ids */ - vp_dev->vdev.id.vendor = pci_dev->subsystem_vendor; - vp_dev->vdev.id.device = pci_dev->subsystem_device; + vp_dev->isr = ldev->isr; + vp_dev->vdev.id = ldev->id; vp_dev->vdev.config = &virtio_pci_config_ops; @@ -264,16 +222,11 @@ int virtio_pci_legacy_probe(struct virtio_pci_device *vp_dev) vp_dev->del_vq = del_vq; return 0; - -err_iomap: - pci_release_region(pci_dev, 0); - return rc; } void virtio_pci_legacy_remove(struct virtio_pci_device *vp_dev) { - struct pci_dev *pci_dev = vp_dev->pci_dev; + struct virtio_pci_legacy_device *ldev = &vp_dev->ldev; - pci_iounmap(pci_dev, vp_dev->ioaddr); - pci_release_region(pci_dev, 0); + vp_legacy_remove(ldev); } diff --git a/drivers/virtio/virtio_pci_legacy_dev.c b/drivers/virtio/virtio_pci_legacy_dev.c new file mode 100644 index 000000000000..9b97680dd02b --- /dev/null +++ b/drivers/virtio/virtio_pci_legacy_dev.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "linux/virtio_pci.h" +#include <linux/virtio_pci_legacy.h> +#include <linux/module.h> +#include <linux/pci.h> + + +/* + * vp_legacy_probe: probe the legacy virtio pci device, note that the + * caller is required to enable PCI device before calling this function. + * @ldev: the legacy virtio-pci device + * + * Return 0 on succeed otherwise fail + */ +int vp_legacy_probe(struct virtio_pci_legacy_device *ldev) +{ + struct pci_dev *pci_dev = ldev->pci_dev; + int rc; + + /* We only own devices >= 0x1000 and <= 0x103f: leave the rest. */ + if (pci_dev->device < 0x1000 || pci_dev->device > 0x103f) + return -ENODEV; + + if (pci_dev->revision != VIRTIO_PCI_ABI_VERSION) + return -ENODEV; + + rc = dma_set_mask(&pci_dev->dev, DMA_BIT_MASK(64)); + if (rc) { + rc = dma_set_mask_and_coherent(&pci_dev->dev, DMA_BIT_MASK(32)); + } else { + /* + * The virtio ring base address is expressed as a 32-bit PFN, + * with a page size of 1 << VIRTIO_PCI_QUEUE_ADDR_SHIFT. + */ + dma_set_coherent_mask(&pci_dev->dev, + DMA_BIT_MASK(32 + VIRTIO_PCI_QUEUE_ADDR_SHIFT)); + } + + if (rc) + dev_warn(&pci_dev->dev, "Failed to enable 64-bit or 32-bit DMA. Trying to continue, but this might not work.\n"); + + rc = pci_request_region(pci_dev, 0, "virtio-pci-legacy"); + if (rc) + return rc; + + ldev->ioaddr = pci_iomap(pci_dev, 0, 0); + if (!ldev->ioaddr) + goto err_iomap; + + ldev->isr = ldev->ioaddr + VIRTIO_PCI_ISR; + + ldev->id.vendor = pci_dev->subsystem_vendor; + ldev->id.device = pci_dev->subsystem_device; + + return 0; +err_iomap: + pci_release_region(pci_dev, 0); + return rc; +} +EXPORT_SYMBOL_GPL(vp_legacy_probe); + +/* + * vp_legacy_probe: remove and cleanup the legacy virtio pci device + * @ldev: the legacy virtio-pci device + */ +void vp_legacy_remove(struct virtio_pci_legacy_device *ldev) +{ + struct pci_dev *pci_dev = ldev->pci_dev; + + pci_iounmap(pci_dev, ldev->ioaddr); + pci_release_region(pci_dev, 0); +} +EXPORT_SYMBOL_GPL(vp_legacy_remove); + +/* + * vp_legacy_get_features - get features from device + * @ldev: the legacy virtio-pci device + * + * Returns the features read from the device + */ +u64 vp_legacy_get_features(struct virtio_pci_legacy_device *ldev) +{ + + return ioread32(ldev->ioaddr + VIRTIO_PCI_HOST_FEATURES); +} +EXPORT_SYMBOL_GPL(vp_legacy_get_features); + +/* + * vp_legacy_get_driver_features - get driver features from device + * @ldev: the legacy virtio-pci device + * + * Returns the driver features read from the device + */ +u64 vp_legacy_get_driver_features(struct virtio_pci_legacy_device *ldev) +{ + return ioread32(ldev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); +} +EXPORT_SYMBOL_GPL(vp_legacy_get_driver_features); + +/* + * vp_legacy_set_features - set features to device + * @ldev: the legacy virtio-pci device + * @features: the features set to device + */ +void vp_legacy_set_features(struct virtio_pci_legacy_device *ldev, + u32 features) +{ + iowrite32(features, ldev->ioaddr + VIRTIO_PCI_GUEST_FEATURES); +} +EXPORT_SYMBOL_GPL(vp_legacy_set_features); + +/* + * vp_legacy_get_status - get the device status + * @ldev: the legacy virtio-pci device + * + * Returns the status read from device + */ +u8 vp_legacy_get_status(struct virtio_pci_legacy_device *ldev) +{ + return ioread8(ldev->ioaddr + VIRTIO_PCI_STATUS); +} +EXPORT_SYMBOL_GPL(vp_legacy_get_status); + +/* + * vp_legacy_set_status - set status to device + * @ldev: the legacy virtio-pci device + * @status: the status set to device + */ +void vp_legacy_set_status(struct virtio_pci_legacy_device *ldev, + u8 status) +{ + iowrite8(status, ldev->ioaddr + VIRTIO_PCI_STATUS); +} +EXPORT_SYMBOL_GPL(vp_legacy_set_status); + +/* + * vp_legacy_queue_vector - set the MSIX vector for a specific virtqueue + * @ldev: the legacy virtio-pci device + * @index: queue index + * @vector: the config vector + * + * Returns the config vector read from the device + */ +u16 vp_legacy_queue_vector(struct virtio_pci_legacy_device *ldev, + u16 index, u16 vector) +{ + iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); + iowrite16(vector, ldev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); + /* Flush the write out to device */ + return ioread16(ldev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR); +} +EXPORT_SYMBOL_GPL(vp_legacy_queue_vector); + +/* + * vp_legacy_config_vector - set the vector for config interrupt + * @ldev: the legacy virtio-pci device + * @vector: the config vector + * + * Returns the config vector read from the device + */ +u16 vp_legacy_config_vector(struct virtio_pci_legacy_device *ldev, + u16 vector) +{ + /* Setup the vector used for configuration events */ + iowrite16(vector, ldev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); + /* Verify we had enough resources to assign the vector */ + /* Will also flush the write out to device */ + return ioread16(ldev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR); +} +EXPORT_SYMBOL_GPL(vp_legacy_config_vector); + +/* + * vp_legacy_set_queue_address - set the virtqueue address + * @ldev: the legacy virtio-pci device + * @index: the queue index + * @queue_pfn: pfn of the virtqueue + */ +void vp_legacy_set_queue_address(struct virtio_pci_legacy_device *ldev, + u16 index, u32 queue_pfn) +{ + iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); + iowrite32(queue_pfn, ldev->ioaddr + VIRTIO_PCI_QUEUE_PFN); +} +EXPORT_SYMBOL_GPL(vp_legacy_set_queue_address); + +/* + * vp_legacy_get_queue_enable - enable a virtqueue + * @ldev: the legacy virtio-pci device + * @index: the queue index + * + * Returns whether a virtqueue is enabled or not + */ +bool vp_legacy_get_queue_enable(struct virtio_pci_legacy_device *ldev, + u16 index) +{ + iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); + return ioread32(ldev->ioaddr + VIRTIO_PCI_QUEUE_PFN); +} +EXPORT_SYMBOL_GPL(vp_legacy_get_queue_enable); + +/* + * vp_legacy_get_queue_size - get size for a virtqueue + * @ldev: the legacy virtio-pci device + * @index: the queue index + * + * Returns the size of the virtqueue + */ +u16 vp_legacy_get_queue_size(struct virtio_pci_legacy_device *ldev, + u16 index) +{ + iowrite16(index, ldev->ioaddr + VIRTIO_PCI_QUEUE_SEL); + return ioread16(ldev->ioaddr + VIRTIO_PCI_QUEUE_NUM); +} +EXPORT_SYMBOL_GPL(vp_legacy_get_queue_size); + +MODULE_VERSION("0.1"); +MODULE_DESCRIPTION("Legacy Virtio PCI Device"); +MODULE_AUTHOR("Wu Zongyong <wuzongyong@linux.alibaba.com>"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/virtio_pci_legacy.h b/include/linux/virtio_pci_legacy.h new file mode 100644 index 000000000000..e5d665faf00e --- /dev/null +++ b/include/linux/virtio_pci_legacy.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _LINUX_VIRTIO_PCI_LEGACY_H +#define _LINUX_VIRTIO_PCI_LEGACY_H + +#include "linux/mod_devicetable.h" +#include <linux/pci.h> +#include <linux/virtio_pci.h> + +struct virtio_pci_legacy_device { + struct pci_dev *pci_dev; + + /* Where to read and clear interrupt */ + u8 __iomem *isr; + /* The IO mapping for the PCI config space (legacy mode only) */ + void __iomem *ioaddr; + + struct virtio_device_id id; +}; + +u64 vp_legacy_get_features(struct virtio_pci_legacy_device *ldev); +u64 vp_legacy_get_driver_features(struct virtio_pci_legacy_device *ldev); +void vp_legacy_set_features(struct virtio_pci_legacy_device *ldev, + u32 features); +u8 vp_legacy_get_status(struct virtio_pci_legacy_device *ldev); +void vp_legacy_set_status(struct virtio_pci_legacy_device *ldev, + u8 status); +u16 vp_legacy_queue_vector(struct virtio_pci_legacy_device *ldev, + u16 idx, u16 vector); +u16 vp_legacy_config_vector(struct virtio_pci_legacy_device *ldev, + u16 vector); +void vp_legacy_set_queue_address(struct virtio_pci_legacy_device *ldev, + u16 index, u32 queue_pfn); +bool vp_legacy_get_queue_enable(struct virtio_pci_legacy_device *ldev, + u16 idx); +void vp_legacy_set_queue_size(struct virtio_pci_legacy_device *ldev, + u16 idx, u16 size); +u16 vp_legacy_get_queue_size(struct virtio_pci_legacy_device *ldev, + u16 idx); +int vp_legacy_probe(struct virtio_pci_legacy_device *ldev); +void vp_legacy_remove(struct virtio_pci_legacy_device *ldev); + +#endif |