diff options
| -rw-r--r-- | drivers/iio/accel/bmc150-accel.c | 408 |
1 files changed, 392 insertions, 16 deletions
diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c index f1b80c4c0b35..4026122a7592 100644 --- a/drivers/iio/accel/bmc150-accel.c +++ b/drivers/iio/accel/bmc150-accel.c @@ -70,7 +70,9 @@ #define BMC150_ACCEL_INT_MAP_0_BIT_SLOPE BIT(2) #define BMC150_ACCEL_REG_INT_MAP_1 0x1A -#define BMC150_ACCEL_INT_MAP_1_BIT_DATA BIT(0) +#define BMC150_ACCEL_INT_MAP_1_BIT_DATA BIT(0) +#define BMC150_ACCEL_INT_MAP_1_BIT_FWM BIT(1) +#define BMC150_ACCEL_INT_MAP_1_BIT_FFULL BIT(2) #define BMC150_ACCEL_REG_INT_RST_LATCH 0x21 #define BMC150_ACCEL_INT_MODE_LATCH_RESET 0x80 @@ -83,7 +85,9 @@ #define BMC150_ACCEL_INT_EN_BIT_SLP_Z BIT(2) #define BMC150_ACCEL_REG_INT_EN_1 0x17 -#define BMC150_ACCEL_INT_EN_BIT_DATA_EN BIT(4) +#define BMC150_ACCEL_INT_EN_BIT_DATA_EN BIT(4) +#define BMC150_ACCEL_INT_EN_BIT_FFULL_EN BIT(5) +#define BMC150_ACCEL_INT_EN_BIT_FWM_EN BIT(6) #define BMC150_ACCEL_REG_INT_OUT_CTRL 0x20 #define BMC150_ACCEL_INT_OUT_CTRL_INT1_LVL BIT(0) @@ -122,6 +126,12 @@ #define BMC150_ACCEL_AXIS_TO_REG(axis) (BMC150_ACCEL_REG_XOUT_L + (axis * 2)) #define BMC150_AUTO_SUSPEND_DELAY_MS 2000 +#define BMC150_ACCEL_REG_FIFO_STATUS 0x0E +#define BMC150_ACCEL_REG_FIFO_CONFIG0 0x30 +#define BMC150_ACCEL_REG_FIFO_CONFIG1 0x3E +#define BMC150_ACCEL_REG_FIFO_DATA 0x3F +#define BMC150_ACCEL_FIFO_LENGTH 32 + enum bmc150_accel_axis { AXIS_X, AXIS_Y, @@ -179,13 +189,14 @@ struct bmc150_accel_data { atomic_t active_intr; struct bmc150_accel_trigger triggers[BMC150_ACCEL_TRIGGERS]; struct mutex mutex; + u8 fifo_mode, watermark; s16 buffer[8]; u8 bw_bits; u32 slope_dur; u32 slope_thres; u32 range; int ev_enable_state; - int64_t timestamp; + int64_t timestamp, old_timestamp; const struct bmc150_accel_chip_info *chip_info; }; @@ -470,6 +481,12 @@ static const struct bmc150_accel_interrupt_info { BMC150_ACCEL_INT_EN_BIT_SLP_Y | BMC150_ACCEL_INT_EN_BIT_SLP_Z }, + { /* fifo watermark interrupt */ + .map_reg = BMC150_ACCEL_REG_INT_MAP_1, + .map_bitmask = BMC150_ACCEL_INT_MAP_1_BIT_FWM, + .en_reg = BMC150_ACCEL_REG_INT_EN_1, + .en_bitmask = BMC150_ACCEL_INT_EN_BIT_FWM_EN, + }, }; static void bmc150_accel_interrupts_setup(struct iio_dev *indio_dev, @@ -823,6 +840,214 @@ static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev, return -EINVAL; } +static ssize_t bmc150_accel_get_fifo_watermark(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + int wm; + + mutex_lock(&data->mutex); + wm = data->watermark; + mutex_unlock(&data->mutex); + + return sprintf(buf, "%d\n", wm); +} + +static ssize_t bmc150_accel_get_fifo_state(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct bmc150_accel_data *data = iio_priv(indio_dev); + bool state; + + mutex_lock(&data->mutex); + state = data->fifo_mode; + mutex_unlock(&data->mutex); + + return sprintf(buf, "%d\n", state); +} + +static IIO_CONST_ATTR(hwfifo_watermark_min, "1"); +static IIO_CONST_ATTR(hwfifo_watermark_max, + __stringify(BMC150_ACCEL_FIFO_LENGTH)); +static IIO_DEVICE_ATTR(hwfifo_enabled, S_IRUGO, + bmc150_accel_get_fifo_state, NULL, 0); +static IIO_DEVICE_ATTR(hwfifo_watermark, S_IRUGO, + bmc150_accel_get_fifo_watermark, NULL, 0); + +static const struct attribute *bmc150_accel_fifo_attributes[] = { + &iio_const_attr_hwfifo_watermark_min.dev_attr.attr, + &iio_const_attr_hwfifo_watermark_max.dev_attr.attr, + &iio_dev_attr_hwfifo_watermark.dev_attr.attr, + &iio_dev_attr_hwfifo_enabled.dev_attr.attr, + NULL, +}; + +static int bmc150_accel_set_watermark(struct iio_dev *indio_dev, unsigned val) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (val > BMC150_ACCEL_FIFO_LENGTH) + val = BMC150_ACCEL_FIFO_LENGTH; + + mutex_lock(&data->mutex); + data->watermark = val; + mutex_unlock(&data->mutex); + + return 0; +} + +/* + * We must read at least one full frame in one burst, otherwise the rest of the + * frame data is discarded. + */ +static int bmc150_accel_fifo_transfer(const struct i2c_client *client, + char *buffer, int samples) +{ + int sample_length = 3 * 2; + u8 reg_fifo_data = BMC150_ACCEL_REG_FIFO_DATA; + int ret = -EIO; + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .flags = 0, + .buf = ®_fifo_data, + .len = sizeof(reg_fifo_data), + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = (u8 *)buffer, + .len = samples * sample_length, + } + }; + + ret = i2c_transfer(client->adapter, msg, 2); + if (ret != 2) + ret = -EIO; + else + ret = 0; + } else { + int i, step = I2C_SMBUS_BLOCK_MAX / sample_length; + + for (i = 0; i < samples * sample_length; i += step) { + ret = i2c_smbus_read_i2c_block_data(client, + reg_fifo_data, step, + &buffer[i]); + if (ret != step) { + ret = -EIO; + break; + } + + ret = 0; + } + } + + if (ret) + dev_err(&client->dev, "Error transferring data from fifo\n"); + + return ret; +} + +static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev, + unsigned samples, bool irq) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret, i; + u8 count; + u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; + int64_t tstamp; + uint64_t sample_period; + ret = i2c_smbus_read_byte_data(data->client, + BMC150_ACCEL_REG_FIFO_STATUS); + if (ret < 0) { + dev_err(&data->client->dev, "Error reading reg_fifo_status\n"); + return ret; + } + + count = ret & 0x7F; + + if (!count) + return 0; + + /* + * If we getting called from IRQ handler we know the stored timestamp is + * fairly accurate for the last stored sample. Otherwise, if we are + * called as a result of a read operation from userspace and hence + * before the watermark interrupt was triggered, take a timestamp + * now. We can fall anywhere in between two samples so the error in this + * case is at most one sample period. + */ + if (!irq) { + data->old_timestamp = data->timestamp; + data->timestamp = iio_get_time_ns(); + } + + /* + * Approximate timestamps for each of the sample based on the sampling + * frequency, timestamp for last sample and number of samples. + * + * Note that we can't use the current bandwidth settings to compute the + * sample period because the sample rate varies with the device + * (e.g. between 31.70ms to 32.20ms for a bandwidth of 15.63HZ). That + * small variation adds when we store a large number of samples and + * creates significant jitter between the last and first samples in + * different batches (e.g. 32ms vs 21ms). + * + * To avoid this issue we compute the actual sample period ourselves + * based on the timestamp delta between the last two flush operations. + */ + sample_period = (data->timestamp - data->old_timestamp); + do_div(sample_period, count); + tstamp = data->timestamp - (count - 1) * sample_period; + + if (samples && count > samples) + count = samples; + + ret = bmc150_accel_fifo_transfer(data->client, (u8 *)buffer, count); + if (ret) + return ret; + + /* + * Ideally we want the IIO core to handle the demux when running in fifo + * mode but not when running in triggered buffer mode. Unfortunately + * this does not seem to be possible, so stick with driver demux for + * now. + */ + for (i = 0; i < count; i++) { + u16 sample[8]; + int j, bit; + + j = 0; + for_each_set_bit(bit, indio_dev->active_scan_mask, + indio_dev->masklength) + memcpy(&sample[j++], &buffer[i * 3 + bit], 2); + + iio_push_to_buffers_with_timestamp(indio_dev, sample, tstamp); + + tstamp += sample_period; + } + + return count; +} + +static int bmc150_accel_fifo_flush(struct iio_dev *indio_dev, unsigned samples) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret; + + mutex_lock(&data->mutex); + ret = __bmc150_accel_fifo_flush(indio_dev, samples, false); + mutex_unlock(&data->mutex); + + return ret; +} + static IIO_CONST_ATTR_SAMP_FREQ_AVAIL( "7.810000 15.630000 31.250000 62.500000 125 250 500 1000"); @@ -962,6 +1187,20 @@ static const struct iio_info bmc150_accel_info = { .driver_module = THIS_MODULE, }; +static const struct iio_info bmc150_accel_info_fifo = { + .attrs = &bmc150_accel_attrs_group, + .read_raw = bmc150_accel_read_raw, + .write_raw = bmc150_accel_write_raw, + .read_event_value = bmc150_accel_read_event, + .write_event_value = bmc150_accel_write_event, + .write_event_config = bmc150_accel_write_event_config, + .read_event_config = bmc150_accel_read_event_config, + .validate_trigger = bmc150_accel_validate_trigger, + .hwfifo_set_watermark = bmc150_accel_set_watermark, + .hwfifo_flush_to_buffer = bmc150_accel_fifo_flush, + .driver_module = THIS_MODULE, +}; + static irqreturn_t bmc150_accel_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; @@ -1057,18 +1296,17 @@ static const struct iio_trigger_ops bmc150_accel_trigger_ops = { .owner = THIS_MODULE, }; -static irqreturn_t bmc150_accel_event_handler(int irq, void *private) +static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev) { - struct iio_dev *indio_dev = private; struct bmc150_accel_data *data = iio_priv(indio_dev); - int ret; int dir; + int ret; ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_INT_STATUS_2); if (ret < 0) { dev_err(&data->client->dev, "Error reading reg_int_status_2\n"); - goto ack_intr_status; + return ret; } if (ret & BMC150_ACCEL_ANY_MOTION_BIT_SIGN) @@ -1097,35 +1335,73 @@ static irqreturn_t bmc150_accel_event_handler(int irq, void *private) IIO_EV_TYPE_ROC, dir), data->timestamp); -ack_intr_status: - if (!data->triggers[BMC150_ACCEL_TRIGGER_DATA_READY].enabled) + return ret; +} + +static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct bmc150_accel_data *data = iio_priv(indio_dev); + bool ack = false; + int ret; + + mutex_lock(&data->mutex); + + if (data->fifo_mode) { + ret = __bmc150_accel_fifo_flush(indio_dev, + BMC150_ACCEL_FIFO_LENGTH, true); + if (ret > 0) + ack = true; + } + + if (data->ev_enable_state) { + ret = bmc150_accel_handle_roc_event(indio_dev); + if (ret > 0) + ack = true; + } + + if (ack) { ret = i2c_smbus_write_byte_data(data->client, BMC150_ACCEL_REG_INT_RST_LATCH, BMC150_ACCEL_INT_MODE_LATCH_INT | BMC150_ACCEL_INT_MODE_LATCH_RESET); + if (ret) + dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n"); + ret = IRQ_HANDLED; + } else { + ret = IRQ_NONE; + } - return IRQ_HANDLED; + mutex_unlock(&data->mutex); + + return ret; } -static irqreturn_t bmc150_accel_data_rdy_trig_poll(int irq, void *private) +static irqreturn_t bmc150_accel_irq_handler(int irq, void *private) { struct iio_dev *indio_dev = private; struct bmc150_accel_data *data = iio_priv(indio_dev); + bool ack = false; int i; + data->old_timestamp = data->timestamp; data->timestamp = iio_get_time_ns(); for (i = 0; i < BMC150_ACCEL_TRIGGERS; i++) { if (data->triggers[i].enabled) { iio_trigger_poll(data->triggers[i].indio_trig); + ack = true; break; } } - if (data->ev_enable_state) + if (data->ev_enable_state || data->fifo_mode) return IRQ_WAKE_THREAD; - else + + if (ack) return IRQ_HANDLED; + + return IRQ_NONE; } static const char *bmc150_accel_match_acpi_device(struct device *dev, int *data) @@ -1232,6 +1508,94 @@ static int bmc150_accel_triggers_setup(struct iio_dev *indio_dev, return ret; } +#define BMC150_ACCEL_FIFO_MODE_STREAM 0x80 +#define BMC150_ACCEL_FIFO_MODE_FIFO 0x40 +#define BMC150_ACCEL_FIFO_MODE_BYPASS 0x00 + +static int bmc150_accel_fifo_set_mode(struct bmc150_accel_data *data) +{ + u8 reg = BMC150_ACCEL_REG_FIFO_CONFIG1; + int ret; + + ret = i2c_smbus_write_byte_data(data->client, reg, data->fifo_mode); + if (ret < 0) { + dev_err(&data->client->dev, "Error writing reg_fifo_config1\n"); + return ret; + } + + if (!data->fifo_mode) + return 0; + + ret = i2c_smbus_write_byte_data(data->client, + BMC150_ACCEL_REG_FIFO_CONFIG0, + data->watermark); + if (ret < 0) + dev_err(&data->client->dev, "Error writing reg_fifo_config0\n"); + + return ret; +} + +static int bmc150_accel_buffer_postenable(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + int ret = 0; + + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) + return iio_triggered_buffer_postenable(indio_dev); + + mutex_lock(&data->mutex); + + if (!data->watermark) + goto out; + + ret = bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, + true); + if (ret) + goto out; + + data->fifo_mode = BMC150_ACCEL_FIFO_MODE_FIFO; + + ret = bmc150_accel_fifo_set_mode(data); + if (ret) { + data->fifo_mode = 0; + bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, + false); + } + +out: + mutex_unlock(&data->mutex); + + return ret; +} + +static int bmc150_accel_buffer_predisable(struct iio_dev *indio_dev) +{ + struct bmc150_accel_data *data = iio_priv(indio_dev); + + if (indio_dev->currentmode == INDIO_BUFFER_TRIGGERED) + return iio_triggered_buffer_predisable(indio_dev); + + mutex_lock(&data->mutex); + + if (!data->fifo_mode) + goto out; + + bmc150_accel_set_interrupt(data, BMC150_ACCEL_INT_WATERMARK, false); + __bmc150_accel_fifo_flush(indio_dev, BMC150_ACCEL_FIFO_LENGTH, false); + data->fifo_mode = 0; + bmc150_accel_fifo_set_mode(data); + +out: + mutex_unlock(&data->mutex); + + return 0; +} + +static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = { + .postenable = bmc150_accel_buffer_postenable, + .predisable = bmc150_accel_buffer_predisable, +}; + static int bmc150_accel_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1278,8 +1642,8 @@ static int bmc150_accel_probe(struct i2c_client *client, if (client->irq >= 0) { ret = devm_request_threaded_irq( &client->dev, client->irq, - bmc150_accel_data_rdy_trig_poll, - bmc150_accel_event_handler, + bmc150_accel_irq_handler, + bmc150_accel_irq_thread_handler, IRQF_TRIGGER_RISING, BMC150_ACCEL_IRQ_NAME, indio_dev); @@ -1309,12 +1673,20 @@ static int bmc150_accel_probe(struct i2c_client *client, ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, bmc150_accel_trigger_handler, - NULL); + &bmc150_accel_buffer_ops); if (ret < 0) { dev_err(&client->dev, "Failed: iio triggered buffer setup\n"); goto err_trigger_unregister; } + + if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C) || + i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_I2C_BLOCK)) { + indio_dev->modes |= INDIO_BUFFER_SOFTWARE; + indio_dev->info = &bmc150_accel_info_fifo; + indio_dev->buffer->attrs = bmc150_accel_fifo_attributes; + } } ret = iio_device_register(indio_dev); @@ -1386,6 +1758,7 @@ static int bmc150_accel_resume(struct device *dev) mutex_lock(&data->mutex); if (atomic_read(&data->active_intr)) bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); + bmc150_accel_fifo_set_mode(data); mutex_unlock(&data->mutex); return 0; @@ -1419,6 +1792,9 @@ static int bmc150_accel_runtime_resume(struct device *dev) ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0); if (ret < 0) return ret; + ret = bmc150_accel_fifo_set_mode(data); + if (ret < 0) + return ret; sleep_val = bmc150_accel_get_startup_times(data); if (sleep_val < 20) |