diff options
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt | 3 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt | 6 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt | 4 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt | 6 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-i801.c | 99 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-octeon.c | 17 | ||||
| -rw-r--r-- | drivers/i2c/muxes/i2c-mux-reg.c | 1 |
8 files changed, 119 insertions, 21 deletions
diff --git a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt index bfeabb843941..71191ff0e781 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-arb-gpio-challenge.txt @@ -44,8 +44,8 @@ Required properties: - our-claim-gpio: The GPIO that we use to claim the bus. - their-claim-gpios: The GPIOs that the other sides use to claim the bus. Note that some implementations may only support a single other master. -- Standard I2C mux properties. See mux.txt in this directory. -- Single I2C child bus node at reg 0. See mux.txt in this directory. +- Standard I2C mux properties. See i2c-mux.txt in this directory. +- Single I2C child bus node at reg 0. See i2c-mux.txt in this directory. Optional properties: - slew-delay-us: microseconds to wait for a GPIO to go high. Default is 10 us. diff --git a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt index 6078aefe7ed4..7ce23ac61308 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-demux-pinctrl.txt @@ -27,7 +27,8 @@ Required properties: - i2c-bus-name: The name of this bus. Also needed as pinctrl-name for the I2C parents. -Furthermore, I2C mux properties and child nodes. See mux.txt in this directory. +Furthermore, I2C mux properties and child nodes. See i2c-mux.txt in this +directory. Example: diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt index 66709a825541..21da3ecbb370 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-gpio.txt @@ -22,8 +22,8 @@ Required properties: - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side port is connected to. - mux-gpios: list of gpios used to control the muxer -* Standard I2C mux properties. See mux.txt in this directory. -* I2C child bus nodes. See mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.txt in this directory. +* I2C child bus nodes. See i2c-mux.txt in this directory. Optional properties: - idle-state: value to set the muxer to when idle. When no value is @@ -33,7 +33,7 @@ For each i2c child node, an I2C child bus will be created. They will be numbered based on their order in the device tree. Whenever an access is made to a device on a child bus, the value set -in the revelant node's reg property will be output using the list of +in the relevant node's reg property will be output using the list of GPIOs, the first in the list holding the least-significant value. If an idle state is defined, using the idle-state (optional) property, diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt index ae8af1694e95..33119a98e144 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt @@ -28,9 +28,9 @@ Also required are: * Standard pinctrl properties that specify the pin mux state for each child bus. See ../pinctrl/pinctrl-bindings.txt. -* Standard I2C mux properties. See mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.txt in this directory. -* I2C child bus nodes. See mux.txt in this directory. +* I2C child bus nodes. See i2c-mux.txt in this directory. For each named state defined in the pinctrl-names property, an I2C child bus will be created. I2C child bus numbers are assigned based on the index into diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt index 688783fbe696..de00d7fc450b 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-reg.txt @@ -7,8 +7,8 @@ Required properties: - compatible: i2c-mux-reg - i2c-parent: The phandle of the I2C bus that this multiplexer's master-side port is connected to. -* Standard I2C mux properties. See mux.txt in this directory. -* I2C child bus nodes. See mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.txt in this directory. +* I2C child bus nodes. See i2c-mux.txt in this directory. Optional properties: - reg: this pair of <offset size> specifies the register to control the mux. @@ -24,7 +24,7 @@ Optional properties: given, it defaults to the last value used. Whenever an access is made to a device on a child bus, the value set -in the revelant node's reg property will be output to the register. +in the relevant node's reg property will be output to the register. If an idle state is defined, using the idle-state (optional) property, whenever an access is not being made to a device on a child bus, the diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 64b1208bca5e..4a60ad214747 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -245,6 +245,13 @@ struct i801_priv { struct platform_device *mux_pdev; #endif struct platform_device *tco_pdev; + + /* + * If set to true the host controller registers are reserved for + * ACPI AML use. Protected by acpi_lock. + */ + bool acpi_reserved; + struct mutex acpi_lock; }; #define FEATURE_SMBUS_PEC (1 << 0) @@ -718,6 +725,12 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, int ret = 0, xact = 0; struct i801_priv *priv = i2c_get_adapdata(adap); + mutex_lock(&priv->acpi_lock); + if (priv->acpi_reserved) { + mutex_unlock(&priv->acpi_lock); + return -EBUSY; + } + pm_runtime_get_sync(&priv->pci_dev->dev); hwpec = (priv->features & FEATURE_SMBUS_PEC) && (flags & I2C_CLIENT_PEC) @@ -820,6 +833,7 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr, out: pm_runtime_mark_last_busy(&priv->pci_dev->dev); pm_runtime_put_autosuspend(&priv->pci_dev->dev); + mutex_unlock(&priv->acpi_lock); return ret; } @@ -1257,6 +1271,83 @@ static void i801_add_tco(struct i801_priv *priv) priv->tco_pdev = pdev; } +#ifdef CONFIG_ACPI +static acpi_status +i801_acpi_io_handler(u32 function, acpi_physical_address address, u32 bits, + u64 *value, void *handler_context, void *region_context) +{ + struct i801_priv *priv = handler_context; + struct pci_dev *pdev = priv->pci_dev; + acpi_status status; + + /* + * Once BIOS AML code touches the OpRegion we warn and inhibit any + * further access from the driver itself. This device is now owned + * by the system firmware. + */ + mutex_lock(&priv->acpi_lock); + + if (!priv->acpi_reserved) { + priv->acpi_reserved = true; + + dev_warn(&pdev->dev, "BIOS is accessing SMBus registers\n"); + dev_warn(&pdev->dev, "Driver SMBus register access inhibited\n"); + + /* + * BIOS is accessing the host controller so prevent it from + * suspending automatically from now on. + */ + pm_runtime_get_sync(&pdev->dev); + } + + if ((function & ACPI_IO_MASK) == ACPI_READ) + status = acpi_os_read_port(address, (u32 *)value, bits); + else + status = acpi_os_write_port(address, (u32)*value, bits); + + mutex_unlock(&priv->acpi_lock); + + return status; +} + +static int i801_acpi_probe(struct i801_priv *priv) +{ + struct acpi_device *adev; + acpi_status status; + + adev = ACPI_COMPANION(&priv->pci_dev->dev); + if (adev) { + status = acpi_install_address_space_handler(adev->handle, + ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler, + NULL, priv); + if (ACPI_SUCCESS(status)) + return 0; + } + + return acpi_check_resource_conflict(&priv->pci_dev->resource[SMBBAR]); +} + +static void i801_acpi_remove(struct i801_priv *priv) +{ + struct acpi_device *adev; + + adev = ACPI_COMPANION(&priv->pci_dev->dev); + if (!adev) + return; + + acpi_remove_address_space_handler(adev->handle, + ACPI_ADR_SPACE_SYSTEM_IO, i801_acpi_io_handler); + + mutex_lock(&priv->acpi_lock); + if (priv->acpi_reserved) + pm_runtime_put(&priv->pci_dev->dev); + mutex_unlock(&priv->acpi_lock); +} +#else +static inline int i801_acpi_probe(struct i801_priv *priv) { return 0; } +static inline void i801_acpi_remove(struct i801_priv *priv) { } +#endif + static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) { unsigned char temp; @@ -1274,6 +1365,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) priv->adapter.dev.parent = &dev->dev; ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&dev->dev)); priv->adapter.retries = 3; + mutex_init(&priv->acpi_lock); priv->pci_dev = dev; switch (dev->device) { @@ -1336,10 +1428,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) return -ENODEV; } - err = acpi_check_resource_conflict(&dev->resource[SMBBAR]); - if (err) { + if (i801_acpi_probe(priv)) return -ENODEV; - } err = pcim_iomap_regions(dev, 1 << SMBBAR, dev_driver_string(&dev->dev)); @@ -1348,6 +1438,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) "Failed to request SMBus region 0x%lx-0x%Lx\n", priv->smba, (unsigned long long)pci_resource_end(dev, SMBBAR)); + i801_acpi_remove(priv); return err; } @@ -1412,6 +1503,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id) err = i2c_add_adapter(&priv->adapter); if (err) { dev_err(&dev->dev, "Failed to add SMBus adapter\n"); + i801_acpi_remove(priv); return err; } @@ -1438,6 +1530,7 @@ static void i801_remove(struct pci_dev *dev) i801_del_mux(priv); i2c_del_adapter(&priv->adapter); + i801_acpi_remove(priv); pci_write_config_byte(dev, SMBHSTCFG, priv->original_hstcfg); platform_device_unregister(priv->tco_pdev); diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c index aa5f01efd826..30ae35146723 100644 --- a/drivers/i2c/busses/i2c-octeon.c +++ b/drivers/i2c/busses/i2c-octeon.c @@ -934,8 +934,15 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, return result; for (i = 0; i < length; i++) { - /* for the last byte TWSI_CTL_AAK must not be set */ - if (i + 1 == length) + /* + * For the last byte to receive TWSI_CTL_AAK must not be set. + * + * A special case is I2C_M_RECV_LEN where we don't know the + * additional length yet. If recv_len is set we assume we're + * not reading the final byte and therefore need to set + * TWSI_CTL_AAK. + */ + if ((i + 1 == length) && !(recv_len && i == 0)) final_read = true; /* clear iflg to allow next event */ @@ -950,12 +957,8 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target, data[i] = octeon_i2c_data_read(i2c); if (recv_len && i == 0) { - if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) { - dev_err(i2c->dev, - "%s: read len > I2C_SMBUS_BLOCK_MAX %d\n", - __func__, data[i]); + if (data[i] > I2C_SMBUS_BLOCK_MAX + 1) return -EPROTO; - } length += data[i]; } diff --git a/drivers/i2c/muxes/i2c-mux-reg.c b/drivers/i2c/muxes/i2c-mux-reg.c index 6773cadf7c9f..26e7c5187a58 100644 --- a/drivers/i2c/muxes/i2c-mux-reg.c +++ b/drivers/i2c/muxes/i2c-mux-reg.c @@ -260,6 +260,7 @@ static struct platform_driver i2c_mux_reg_driver = { .remove = i2c_mux_reg_remove, .driver = { .name = "i2c-mux-reg", + .of_match_table = of_match_ptr(i2c_mux_reg_of_match), }, }; |