summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/avr32/boards/atngw100/setup.c7
-rw-r--r--arch/avr32/boards/atstk1000/atstk1002.c18
-rw-r--r--arch/avr32/boards/atstk1000/atstk1003.c12
-rw-r--r--arch/avr32/boards/atstk1000/atstk1004.c12
-rw-r--r--arch/avr32/include/asm/atmel-mci.h22
-rw-r--r--arch/avr32/mach-at32ap/at32ap700x.c72
-rw-r--r--drivers/mmc/host/atmel-mci-regs.h6
-rw-r--r--drivers/mmc/host/atmel-mci.c24
8 files changed, 137 insertions, 36 deletions
diff --git a/arch/avr32/boards/atngw100/setup.c b/arch/avr32/boards/atngw100/setup.c
index b8286f1ce854..f3085208959f 100644
--- a/arch/avr32/boards/atngw100/setup.c
+++ b/arch/avr32/boards/atngw100/setup.c
@@ -53,8 +53,11 @@ static struct spi_board_info spi0_board_info[] __initdata = {
};
static struct mci_platform_data __initdata mci0_data = {
- .detect_pin = GPIO_PIN_PC(25),
- .wp_pin = GPIO_PIN_PE(0),
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = GPIO_PIN_PC(25),
+ .wp_pin = GPIO_PIN_PE(0),
+ },
};
/*
diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index dfc3443e23aa..4fedbc4488de 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -264,16 +264,20 @@ void __init setup_board(void)
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+
/* MMC card detect requires MACB0 *NOT* be used */
#ifdef CONFIG_BOARD_ATSTK1002_SW6_CUSTOM
-static struct mci_platform_data __initdata mci0_data = {
- .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
- .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
-};
-#define MCI_PDATA &mci0_data
+ .detect_pin = GPIO_PIN_PC(14), /* gpio30/sdcd */
+ .wp_pin = GPIO_PIN_PC(15), /* gpio31/sdwp */
#else
-#define MCI_PDATA NULL
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
#endif /* SW6 for sd{cd,wp} routing */
+ },
+};
#endif /* SW2 for MMC signal routing */
@@ -326,7 +330,7 @@ static int __init atstk1002_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, MCI_PDATA);
+ at32_add_device_mci(0, &mci0_pdata);
#endif
#ifdef CONFIG_BOARD_ATSTK1002_SW5_CUSTOM
set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
diff --git a/arch/avr32/boards/atstk1000/atstk1003.c b/arch/avr32/boards/atstk1000/atstk1003.c
index 0cf664174c17..acc61235b895 100644
--- a/arch/avr32/boards/atstk1000/atstk1003.c
+++ b/arch/avr32/boards/atstk1000/atstk1003.c
@@ -66,6 +66,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
} };
#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+#endif
+
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1003_setup_extdac(void)
{
@@ -154,7 +164,7 @@ static int __init atstk1003_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_usba(0, NULL);
#ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index 50a5273e5916..d6a2d02f0329 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -71,6 +71,16 @@ static struct spi_board_info spi1_board_info[] __initdata = { {
} };
#endif
+#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
+static struct mci_platform_data __initdata mci0_data = {
+ .slot[0] = {
+ .bus_width = 4,
+ .detect_pin = -ENODEV,
+ .wp_pin = -ENODEV,
+ },
+};
+#endif
+
#ifdef CONFIG_BOARD_ATSTK1000_EXTDAC
static void __init atstk1004_setup_extdac(void)
{
@@ -137,7 +147,7 @@ static int __init atstk1004_init(void)
at32_add_device_spi(1, spi1_board_info, ARRAY_SIZE(spi1_board_info));
#endif
#ifndef CONFIG_BOARD_ATSTK100X_SW2_CUSTOM
- at32_add_device_mci(0, NULL);
+ at32_add_device_mci(0, &mci0_data);
#endif
at32_add_device_lcdc(0, &atstk1000_lcdc_data,
fbmem_start, fbmem_size, 0);
diff --git a/arch/avr32/include/asm/atmel-mci.h b/arch/avr32/include/asm/atmel-mci.h
index c2ea6e1c9aa1..d38c64ca41e8 100644
--- a/arch/avr32/include/asm/atmel-mci.h
+++ b/arch/avr32/include/asm/atmel-mci.h
@@ -1,9 +1,29 @@
#ifndef __ASM_AVR32_ATMEL_MCI_H
#define __ASM_AVR32_ATMEL_MCI_H
-struct mci_platform_data {
+/**
+ * struct mci_slot_pdata - board-specific per-slot configuration
+ * @bus_width: Number of data lines wired up the slot
+ * @detect_pin: GPIO pin wired to the card detect switch
+ * @wp_pin: GPIO pin wired to the write protect sensor
+ *
+ * If a given slot is not present on the board, @bus_width should be
+ * set to 0. The other fields are ignored in this case.
+ *
+ * Any pins that aren't available should be set to a negative value.
+ */
+struct mci_slot_pdata {
+ unsigned int bus_width;
int detect_pin;
int wp_pin;
};
+/**
+ * struct mci_platform_data - board-specific MMC/SDcard configuration
+ * @slot: Per-slot configuration data.
+ */
+struct mci_platform_data {
+ struct mci_slot_pdata slot[2];
+};
+
#endif /* __ASM_AVR32_ATMEL_MCI_H */
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index e01dbe4ebb40..9967d5a3b6eb 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1272,10 +1272,13 @@ static struct clk atmel_mci0_pclk = {
struct platform_device *__init
at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
{
- struct mci_platform_data _data;
struct platform_device *pdev;
- if (id != 0)
+ if (id != 0 || !data)
+ return NULL;
+
+ /* Must have at least one usable slot */
+ if (!data->slot[0].bus_width && !data->slot[1].bus_width)
return NULL;
pdev = platform_device_alloc("atmel_mci", id);
@@ -1286,28 +1289,61 @@ at32_add_device_mci(unsigned int id, struct mci_platform_data *data)
ARRAY_SIZE(atmel_mci0_resource)))
goto fail;
- if (!data) {
- data = &_data;
- memset(data, -1, sizeof(struct mci_platform_data));
- data->detect_pin = GPIO_PIN_NONE;
- data->wp_pin = GPIO_PIN_NONE;
- }
if (platform_device_add_data(pdev, data,
sizeof(struct mci_platform_data)))
goto fail;
- select_peripheral(PA(10), PERIPH_A, 0); /* CLK */
- select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
- select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
- select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
- select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
- select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
+ /* CLK line is common to both slots */
+ select_peripheral(PA(10), PERIPH_A, 0);
- if (gpio_is_valid(data->detect_pin))
- at32_select_gpio(data->detect_pin, 0);
- if (gpio_is_valid(data->wp_pin))
- at32_select_gpio(data->wp_pin, 0);
+ switch (data->slot[0].bus_width) {
+ case 4:
+ select_peripheral(PA(13), PERIPH_A, 0); /* DATA1 */
+ select_peripheral(PA(14), PERIPH_A, 0); /* DATA2 */
+ select_peripheral(PA(15), PERIPH_A, 0); /* DATA3 */
+ /* fall through */
+ case 1:
+ select_peripheral(PA(11), PERIPH_A, 0); /* CMD */
+ select_peripheral(PA(12), PERIPH_A, 0); /* DATA0 */
+
+ if (gpio_is_valid(data->slot[0].detect_pin))
+ at32_select_gpio(data->slot[0].detect_pin, 0);
+ if (gpio_is_valid(data->slot[0].wp_pin))
+ at32_select_gpio(data->slot[0].wp_pin, 0);
+ break;
+ case 0:
+ /* Slot is unused */
+ break;
+ default:
+ goto fail;
+ }
+
+ switch (data->slot[1].bus_width) {
+ case 4:
+ select_peripheral(PB(8), PERIPH_B, 0); /* DATA1 */
+ select_peripheral(PB(9), PERIPH_B, 0); /* DATA2 */
+ select_peripheral(PB(10), PERIPH_B, 0); /* DATA3 */
+ /* fall through */
+ case 1:
+ select_peripheral(PB(6), PERIPH_B, 0); /* CMD */
+ select_peripheral(PB(7), PERIPH_B, 0); /* DATA0 */
+
+ if (gpio_is_valid(data->slot[1].detect_pin))
+ at32_select_gpio(data->slot[1].detect_pin, 0);
+ if (gpio_is_valid(data->slot[1].wp_pin))
+ at32_select_gpio(data->slot[1].wp_pin, 0);
+ break;
+ case 0:
+ /* Slot is unused */
+ break;
+ default:
+ if (!data->slot[0].bus_width)
+ goto fail;
+
+ data->slot[1].bus_width = 0;
+ break;
+ }
atmel_mci0_pclk.dev = &pdev->dev;
diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h
index 26bd80e65031..b58364ed6bba 100644
--- a/drivers/mmc/host/atmel-mci-regs.h
+++ b/drivers/mmc/host/atmel-mci-regs.h
@@ -25,8 +25,10 @@
#define MCI_SDCR 0x000c /* SD Card / SDIO */
# define MCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */
# define MCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */
-# define MCI_SDCBUS_1BIT ( 0 << 7) /* 1-bit data bus */
-# define MCI_SDCBUS_4BIT ( 1 << 7) /* 4-bit data bus */
+# define MCI_SDCSEL_MASK ( 3 << 0)
+# define MCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */
+# define MCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */
+# define MCI_SDCBUS_MASK ( 3 << 6)
#define MCI_ARGR 0x0010 /* Command Argument */
#define MCI_CMDR 0x0014 /* Command */
# define MCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */
diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c
index 14ab28da7fa8..8170905a0401 100644
--- a/drivers/mmc/host/atmel-mci.c
+++ b/drivers/mmc/host/atmel-mci.c
@@ -508,9 +508,10 @@ static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct atmel_mci *host = mmc_priv(mmc);
+ host->sdc_reg &= ~MCI_SDCBUS_MASK;
switch (ios->bus_width) {
case MMC_BUS_WIDTH_1:
- host->sdc_reg = 0;
+ host->sdc_reg |= MCI_SDCBUS_1BIT;
break;
case MMC_BUS_WIDTH_4:
host->sdc_reg = MCI_SDCBUS_4BIT;
@@ -1014,9 +1015,11 @@ static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id)
static int __init atmci_probe(struct platform_device *pdev)
{
struct mci_platform_data *pdata;
+ struct mci_slot_pdata *slot;
struct atmel_mci *host;
struct mmc_host *mmc;
struct resource *regs;
+ u32 sdc_reg;
int irq;
int ret;
@@ -1030,6 +1033,17 @@ static int __init atmci_probe(struct platform_device *pdev)
if (irq < 0)
return irq;
+ /* TODO: Allow using several slots at once */
+ if (pdata->slot[0].bus_width) {
+ sdc_reg = MCI_SDCSEL_SLOT_A;
+ slot = &pdata->slot[0];
+ } else if (pdata->slot[1].bus_width) {
+ sdc_reg = MCI_SDCSEL_SLOT_B;
+ slot = &pdata->slot[1];
+ } else {
+ return -EINVAL;
+ }
+
mmc = mmc_alloc_host(sizeof(struct atmel_mci), &pdev->dev);
if (!mmc)
return -ENOMEM;
@@ -1037,8 +1051,9 @@ static int __init atmci_probe(struct platform_device *pdev)
host = mmc_priv(mmc);
host->pdev = pdev;
host->mmc = mmc;
- host->detect_pin = pdata->detect_pin;
- host->wp_pin = pdata->wp_pin;
+ host->detect_pin = slot->detect_pin;
+ host->wp_pin = slot->wp_pin;
+ host->sdc_reg = sdc_reg;
host->mck = clk_get(&pdev->dev, "mci_clk");
if (IS_ERR(host->mck)) {
@@ -1062,7 +1077,8 @@ static int __init atmci_probe(struct platform_device *pdev)
mmc->f_min = (host->bus_hz + 511) / 512;
mmc->f_max = host->bus_hz / 2;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps |= MMC_CAP_4_BIT_DATA;
+ if (slot->bus_width >= 4)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->max_hw_segs = 64;
mmc->max_phys_segs = 64;
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 09:29:21 +0100