diff options
110 files changed, 5727 insertions, 6983 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 277451a52695..16202c8ac68f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -378,8 +378,9 @@ T: git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git S: Supported AMD MICROCODE UPDATE SUPPORT -P: Peter Oruba -M: peter.oruba@amd.com +P: Andreas Herrmann +M: andeas.herrmann3@amd.com +L: amd64-microcode@amd64.org S: Supported AMS (Apple Motion Sensor) DRIVER diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f504c801792f..5021db2217ed 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -540,16 +540,15 @@ config ARCH_OMAP help Support for TI's OMAP platform (OMAP1 and OMAP2). -config ARCH_MSM7X00A - bool "Qualcomm MSM7X00A" +config ARCH_MSM + bool "Qualcomm MSM" select GENERIC_TIME select GENERIC_CLOCKEVENTS help - Support for Qualcomm MSM7X00A based systems. This runs on the ARM11 - apps processor of the MSM7X00A and depends on a shared memory + Support for Qualcomm MSM7K based systems. This runs on the ARM11 + apps processor of the MSM7K and depends on a shared memory interface to the ARM9 modem processor which runs the baseband stack and controls some vital subsystems (clock and power control, etc). - <http://www.cdmatech.com/products/msm7200_chipset_solution.jsp> endchoice diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 7d5121260fda..bd6e28115ebb 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -141,7 +141,7 @@ endif machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_ORION5X) := orion5x plat-$(CONFIG_PLAT_ORION) := orion - machine-$(CONFIG_ARCH_MSM7X00A) := msm + machine-$(CONFIG_ARCH_MSM) := msm machine-$(CONFIG_ARCH_LOKI) := loki machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 9b8748a8d9dd..f3af0b593eb0 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -1,71 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Mon Nov 28 10:30:09 2005 +# Linux kernel version: 2.6.27 +# Mon Oct 20 10:12:23 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -79,50 +119,97 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_MSM7X00A is not set # -# Intel PXA2xx Implementations +# Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set # CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_IDP is not set CONFIG_PXA_SHARPSL=y -CONFIG_PXA_SHARPSL_25x=y -# CONFIG_PXA_SHARPSL_27x is not set CONFIG_MACH_POODLE=y CONFIG_MACH_CORGI=y CONFIG_MACH_SHEPHERD=y CONFIG_MACH_HUSKY=y +# CONFIG_MACH_AKITA is not set +# CONFIG_MACH_SPITZ is not set +# CONFIG_MACH_BORZOI is not set CONFIG_MACH_TOSA=y +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA25x=y CONFIG_PXA_SHARP_C7xx=y CONFIG_PXA_SSP=y +# CONFIG_PXA_PWM is not set +# CONFIG_TOSA_BT is not set +CONFIG_PXA_HAVE_BOARD_IRQS=y + +# +# Boot options +# + +# +# Power management +# # # Processor Type @@ -131,25 +218,30 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +# CONFIG_IWMMXT is not set CONFIG_XSCALE_PMU=y +CONFIG_SHARP_LOCOMO=y CONFIG_SHARP_PARAM=y +CONFIG_SHARPSL_PM=y CONFIG_SHARP_SCOOP=y # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -164,16 +256,32 @@ CONFIG_PCMCIA_PXA2XX=y # # Kernel Features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_ALIGNMENT_TRAP=y # @@ -183,6 +291,13 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -199,6 +314,7 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # CONFIG_ARTHUR is not set @@ -207,12 +323,12 @@ CONFIG_BINFMT_MISC=m # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -CONFIG_APM=y - -# -# Networking -# +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # @@ -223,6 +339,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=m +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -236,140 +356,131 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +# CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -# CONFIG_IP_NF_MATCH_STRING is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -# CONFIG_IP_NF_TARGET_NFQUEUE is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -# CONFIG_IP_NF_TARGET_MASQUERADE is not set -# CONFIG_IP_NF_TARGET_REDIRECT is not set -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_MANGLE=m -# CONFIG_IP_NF_TARGET_TOS is not set # CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_DSCP is not set -# CONFIG_IP_NF_TARGET_MARK is not set -# CONFIG_IP_NF_TARGET_CLASSIFY is not set # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m -# CONFIG_IP_NF_TARGET_NOTRACK is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_MATCH_MH is not set +CONFIG_IP6_NF_MATCH_RT=m # CONFIG_IP6_NF_TARGET_LOG is not set +CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_MARK is not set # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -377,21 +488,16 @@ CONFIG_IP6_NF_RAW=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -421,27 +527,17 @@ CONFIG_IRCOMM=m # # Dongle support # - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set # # FIR device drivers # # CONFIG_USB_IRDA is not set # CONFIG_SIGMATEL_FIR is not set -# CONFIG_NSC_FIR is not set -# CONFIG_WINBOND_FIR is not set -# CONFIG_SMC_IRCC_FIR is not set -# CONFIG_ALI_FIR is not set -# CONFIG_VIA_FIR is not set CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -457,9 +553,12 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIUSB=m # CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m @@ -468,11 +567,20 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m # CONFIG_IEEE80211_CRYPT_CCMP is not set # CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -481,19 +589,16 @@ CONFIG_IEEE80211_CRYPT_WEP=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -501,16 +606,20 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -535,16 +644,18 @@ CONFIG_MTD_ROM=y # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_SHARP_SL=y # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -553,78 +664,66 @@ CONFIG_MTD_SHARP_SL=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_H1900 is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_SHARPSL=y # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=y # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -644,121 +743,76 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=m +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support +# Wireless LAN # -# CONFIG_PCMCIA_RAYCS is not set +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_CS=m -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support +# USB Network Adapters # +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set @@ -768,10 +822,6 @@ CONFIG_PCMCIA_PCNET=m # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -782,30 +832,29 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set +CONFIG_SLHC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set +# CONFIG_INPUT_APMPOWER is not set # # Input Device Drivers @@ -814,19 +863,39 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_LOCOMO is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set CONFIG_KEYBOARD_CORGI=y CONFIG_KEYBOARD_SPITZ=y +CONFIG_KEYBOARD_TOSA=y +# CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES is not set +# CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_CORGI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # @@ -839,8 +908,11 @@ CONFIG_INPUT_UINPUT=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -849,6 +921,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -860,97 +933,130 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -CONFIG_I2C_ALGOBIT=y -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set -# CONFIG_RTC_X1205_I2C is not set +# CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y # -# Hardware Monitoring support +# SPI Master Controller Drivers # +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set # CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set @@ -960,70 +1066,193 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +CONFIG_SENSORS_MAX1111=y # CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Multimedia Capabilities Port drivers +# Multifunction device drivers # +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # -CONFIG_VIDEO_DEV=m - -# -# Video For Linux -# # -# Video Adapters +# Multimedia core support # +CONFIG_VIDEO_DEV=m +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +# CONFIG_DVB_CORE is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_CPIA2 is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set -# CONFIG_TUNER_3036 is not set +# CONFIG_SOC_CAMERA is not set +CONFIG_V4L_USB_DRIVERS=y +# CONFIG_USB_VIDEO_CLASS is not set +CONFIG_USB_GSPCA=m +# CONFIG_USB_M5602 is not set +# CONFIG_USB_GSPCA_CONEX is not set +# CONFIG_USB_GSPCA_ETOMS is not set +# CONFIG_USB_GSPCA_FINEPIX is not set +# CONFIG_USB_GSPCA_MARS is not set +# CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_PAC207 is not set +# CONFIG_USB_GSPCA_PAC7311 is not set +# CONFIG_USB_GSPCA_SONIXB is not set +# CONFIG_USB_GSPCA_SONIXJ is not set +# CONFIG_USB_GSPCA_SPCA500 is not set +# CONFIG_USB_GSPCA_SPCA501 is not set +# CONFIG_USB_GSPCA_SPCA505 is not set +# CONFIG_USB_GSPCA_SPCA506 is not set +# CONFIG_USB_GSPCA_SPCA508 is not set +# CONFIG_USB_GSPCA_SPCA561 is not set +# CONFIG_USB_GSPCA_STK014 is not set +# CONFIG_USB_GSPCA_SUNPLUS is not set +# CONFIG_USB_GSPCA_T613 is not set +# CONFIG_USB_GSPCA_TV8532 is not set +# CONFIG_USB_GSPCA_VC032X is not set +# CONFIG_USB_GSPCA_ZC3XX is not set +# CONFIG_VIDEO_PVRUSB2 is not set # CONFIG_VIDEO_EM28XX is not set +# CONFIG_VIDEO_USBVISION is not set +CONFIG_VIDEO_USBVIDEO=m +CONFIG_USB_VICAM=m +CONFIG_USB_IBMCAM=m +CONFIG_USB_KONICAWC=m +# CONFIG_USB_QUICKCAM_MESSENGER is not set +# CONFIG_USB_ET61X251 is not set # CONFIG_VIDEO_OVCAMCHIP is not set -# CONFIG_VIDEO_AUDIO_DECODER is not set -# CONFIG_VIDEO_DECODER is not set - -# -# Radio Adapters -# -# CONFIG_RADIO_MAESTRO is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +CONFIG_USB_OV511=m +CONFIG_USB_SE401=m +CONFIG_USB_SN9C102=m +CONFIG_USB_STV680=m +# CONFIG_USB_ZC0301 is not set +# CONFIG_USB_PWC is not set +# CONFIG_USB_ZR364XX is not set +# CONFIG_USB_STKWEBCAM is not set +# CONFIG_USB_S2255 is not set +CONFIG_RADIO_ADAPTERS=y +CONFIG_USB_DSBR=m +# CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set # CONFIG_FB_PXA is not set +# CONFIG_FB_MBX is not set CONFIG_FB_W100=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_CORGI=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_LOCOMO=y + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -1031,6 +1260,7 @@ CONFIG_FB_W100=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set # CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set CONFIG_FONTS=y CONFIG_FONT_8x8=y @@ -1043,93 +1273,95 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set - -# -# Logo configuration -# # CONFIG_LOGO is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -# CONFIG_LCD_CLASS_DEVICE is not set -CONFIG_BACKLIGHT_CORGI=y - -# -# Sound -# CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y +# CONFIG_SND is not set +CONFIG_SOUND_PRIME=y +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# Advanced Linux Sound Architecture +# USB Input Devices # -# CONFIG_SND is not set +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set # -# Open Sound System +# USB HID Boot Protocol drivers # -CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set -CONFIG_SOUND_OSS=y -# CONFIG_SOUND_TRACEINIT is not set -# CONFIG_SOUND_DMAP is not set -# CONFIG_SOUND_AD1816 is not set -# CONFIG_SOUND_SGALAXY is not set -# CONFIG_SOUND_ADLIB is not set -# CONFIG_SOUND_ACI_MIXER is not set -# CONFIG_SOUND_CS4232 is not set -# CONFIG_SOUND_SSCAPE is not set -# CONFIG_SOUND_GUS is not set -# CONFIG_SOUND_VMIDI is not set -# CONFIG_SOUND_TRIX is not set -# CONFIG_SOUND_MSS is not set -# CONFIG_SOUND_MPU401 is not set -# CONFIG_SOUND_NM256 is not set -# CONFIG_SOUND_MAD16 is not set -# CONFIG_SOUND_PAS is not set -# CONFIG_SOUND_PSS is not set -# CONFIG_SOUND_SB is not set -# CONFIG_SOUND_AWE32_SYNTH is not set -# CONFIG_SOUND_WAVEFRONT is not set -# CONFIG_SOUND_MAUI is not set -# CONFIG_SOUND_YM3812 is not set -# CONFIG_SOUND_OPL3SA1 is not set -# CONFIG_SOUND_OPL3SA2 is not set -# CONFIG_SOUND_UART6850 is not set -# CONFIG_SOUND_AEDSP16 is not set -# CONFIG_SOUND_TVMIXER is not set -# CONFIG_SOUND_AD1980 is not set - -# -# USB support +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m + # +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BRIGHT=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DELL=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_CS=m +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers # -# CONFIG_OBSOLETE_OSS_USB_DRIVER is not set CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1148,33 +1380,11 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -# CONFIG_USB_ACECAD is not set -CONFIG_USB_KBTAB=m -CONFIG_USB_POWERMATE=m -CONFIG_USB_MTOUCH=m -# CONFIG_USB_ITMTOUCH is not set -CONFIG_USB_EGALAX=m -# CONFIG_USB_YEALINK is not set -CONFIG_USB_XPAD=m -CONFIG_USB_ATI_REMOTE=m -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices @@ -1183,56 +1393,22 @@ CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # -# USB Multimedia devices -# -CONFIG_USB_DABUSB=m -CONFIG_USB_VICAM=m -CONFIG_USB_DSBR=m -CONFIG_USB_IBMCAM=m -CONFIG_USB_KONICAWC=m -CONFIG_USB_OV511=m -CONFIG_USB_SE401=m -CONFIG_USB_SN9C102=m -CONFIG_USB_STV680=m -# CONFIG_USB_PWC is not set - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set -CONFIG_USB_MON=y - -# # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m @@ -1240,6 +1416,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m +# CONFIG_USB_SERIAL_IUU is not set CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set @@ -1257,50 +1434,68 @@ CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m # CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m +# CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y +# CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m -CONFIG_USB_AUERSWALD=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETSERVO=m +# CONFIG_USB_PHIDGET is not set CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_NET2280 is not set -CONFIG_USB_GADGET_PXA2XX=y -CONFIG_USB_PXA2XX=y -# CONFIG_USB_PXA2XX_SMALL is not set -# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +CONFIG_USB_GADGET_PXA25X=y +CONFIG_USB_PXA25X=y +# CONFIG_USB_PXA25X_SMALL is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set # CONFIG_USB_GADGET_DUALSPEED is not set CONFIG_USB_ZERO=m @@ -1310,15 +1505,42 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card support +# MMC/SD/SDIO Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# CONFIG_MMC_PXA=y -# CONFIG_MMC_WBSD is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set # # File systems @@ -1327,16 +1549,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_JBD is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1361,11 +1584,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1377,39 +1602,42 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_RUBIN=y # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1419,7 +1647,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1439,11 +1666,9 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y @@ -1484,35 +1709,71 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_USER is not set CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1521,46 +1782,113 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_LZO is not set # -# Hardware crypto devices +# Random Number Generation # +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index ae4c5e62086a..3b4ecf2a90dd 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -133,7 +133,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -CONFIG_ARCH_MSM7X00A=y +CONFIG_ARCH_MSM=y # # Boot options diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 7d59fb1f1cea..4df5b4db2aa0 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -1,71 +1,111 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.15-rc2 -# Mon Nov 28 10:26:52 2005 +# Linux kernel version: 2.6.27 +# Mon Oct 20 10:25:37 2008 # CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y -CONFIG_UID16=y +# CONFIG_NO_IOPORT is not set +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_MTD_XIP=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y -CONFIG_CLEAN_COMPILE=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set -CONFIG_SYSCTL=y +# CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set -CONFIG_HOTPLUG=y -CONFIG_KOBJECT_UEVENT=y # CONFIG_IKCONFIG is not set -CONFIG_INITRAMFS_SOURCE="" +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_CC_ALIGN_FUNCTIONS=0 -CONFIG_CC_ALIGN_LABELS=0 -CONFIG_CC_ALIGN_LOOPS=0 -CONFIG_CC_ALIGN_JUMPS=0 +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -79,49 +119,95 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # System Type # +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set # CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set # CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_IOP3XX is not set -# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set # CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set # CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set CONFIG_ARCH_PXA=y # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_MSM7X00A is not set # -# Intel PXA2xx Implementations +# Intel PXA2xx/PXA3xx Implementations # +# CONFIG_ARCH_GUMSTIX is not set # CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_LOGICPD_PXA270 is not set # CONFIG_MACH_MAINSTONE is not set +# CONFIG_MACH_MP900C is not set # CONFIG_ARCH_PXA_IDP is not set CONFIG_PXA_SHARPSL=y -# CONFIG_PXA_SHARPSL_25x is not set -CONFIG_PXA_SHARPSL_27x=y +# CONFIG_MACH_POODLE is not set +# CONFIG_MACH_CORGI is not set +# CONFIG_MACH_SHEPHERD is not set +# CONFIG_MACH_HUSKY is not set CONFIG_MACH_AKITA=y CONFIG_MACH_SPITZ=y CONFIG_MACH_BORZOI=y +# CONFIG_MACH_TOSA is not set +# CONFIG_ARCH_VIPER is not set +# CONFIG_ARCH_PXA_ESERIES is not set +# CONFIG_TRIZEPS_PXA is not set +# CONFIG_MACH_EM_X270 is not set +# CONFIG_MACH_COLIBRI is not set +# CONFIG_MACH_ZYLONITE is not set +# CONFIG_MACH_LITTLETON is not set +# CONFIG_MACH_TAVOREVB is not set +# CONFIG_MACH_SAAR is not set +# CONFIG_MACH_ARMCORE is not set +# CONFIG_MACH_CM_X300 is not set +# CONFIG_MACH_MAGICIAN is not set +# CONFIG_MACH_MIOA701 is not set +# CONFIG_MACH_PCM027 is not set +# CONFIG_ARCH_PXA_PALM is not set +# CONFIG_PXA_EZX is not set CONFIG_PXA27x=y -CONFIG_IWMMXT=y CONFIG_PXA_SHARP_Cxx00=y CONFIG_PXA_SSP=y +# CONFIG_PXA_PWM is not set + +# +# Boot options +# + +# +# Power management +# # # Processor Type @@ -130,25 +216,29 @@ CONFIG_CPU_32=y CONFIG_CPU_XSCALE=y CONFIG_CPU_32v5=y CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_PABRT_NOIFAR=y CONFIG_CPU_CACHE_VIVT=y CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y # # Processor Features # CONFIG_ARM_THUMB=y +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_IWMMXT=y CONFIG_XSCALE_PMU=y CONFIG_SHARP_PARAM=y +CONFIG_SHARPSL_PM=y CONFIG_SHARP_SCOOP=y # # Bus support # -CONFIG_ISA_DMA_API=y - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set CONFIG_PCMCIA=y @@ -163,16 +253,32 @@ CONFIG_PCMCIA_PXA2XX=y # # Kernel Features # +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_HZ=100 +# CONFIG_AEABI is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_ALIGNMENT_TRAP=y # @@ -182,6 +288,13 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="console=ttyS0,115200n8 console=tty1 noinitrd root=/dev/mtdblock2 rootfstype=jffs2 debug" # CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_FREQ is not set +# CONFIG_CPU_IDLE is not set # # Floating point emulation @@ -198,6 +311,7 @@ CONFIG_FPE_NWFPE=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +CONFIG_HAVE_AOUT=y CONFIG_BINFMT_AOUT=m CONFIG_BINFMT_MISC=m # CONFIG_ARTHUR is not set @@ -206,12 +320,12 @@ CONFIG_BINFMT_MISC=m # Power management options # CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -CONFIG_APM=y - -# -# Networking -# +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_APM_EMULATION=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y # @@ -222,6 +336,10 @@ CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=m # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -235,140 +353,131 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set -# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_TUNNEL is not set +CONFIG_INET_TUNNEL=m +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=m # CONFIG_IPV6_PRIVACY is not set +# CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m CONFIG_INET6_IPCOMP=m +# CONFIG_IPV6_MIP6 is not set +CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m +CONFIG_INET6_XFRM_MODE_TRANSPORT=m +CONFIG_INET6_XFRM_MODE_TUNNEL=m +CONFIG_INET6_XFRM_MODE_BEET=m +# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set +CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m +# CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set +# CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set +# CONFIG_NF_CONNTRACK is not set +CONFIG_NETFILTER_XTABLES=m +# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set +# CONFIG_NETFILTER_XT_TARGET_DSCP is not set +# CONFIG_NETFILTER_XT_TARGET_MARK is not set +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set +# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set +# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set +# CONFIG_NETFILTER_XT_MATCH_DCCP is not set +# CONFIG_NETFILTER_XT_MATCH_DSCP is not set +# CONFIG_NETFILTER_XT_MATCH_ESP is not set +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set +# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set +# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_MAC is not set +# CONFIG_NETFILTER_XT_MATCH_MARK is not set +# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +# CONFIG_NETFILTER_XT_MATCH_POLICY is not set +# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set +# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set +# CONFIG_NETFILTER_XT_MATCH_REALM is not set +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set +# CONFIG_NETFILTER_XT_MATCH_SCTP is not set +# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set +# CONFIG_NETFILTER_XT_MATCH_STRING is not set +# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -# CONFIG_IP_NF_CT_ACCT is not set -# CONFIG_IP_NF_CONNTRACK_MARK is not set -# CONFIG_IP_NF_CONNTRACK_EVENTS is not set -CONFIG_IP_NF_CT_PROTO_SCTP=m -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -# CONFIG_IP_NF_NETBIOS_NS is not set -CONFIG_IP_NF_TFTP=m -CONFIG_IP_NF_AMANDA=m -# CONFIG_IP_NF_PPTP is not set +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_LIMIT=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_MAC=m -CONFIG_IP_NF_MATCH_PKTTYPE=m -CONFIG_IP_NF_MATCH_MARK=m -CONFIG_IP_NF_MATCH_MULTIPORT=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m +# CONFIG_IP_NF_MATCH_AH is not set CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_DSCP=m -CONFIG_IP_NF_MATCH_AH_ESP=m -CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_TCPMSS=m -CONFIG_IP_NF_MATCH_HELPER=m -CONFIG_IP_NF_MATCH_STATE=m -CONFIG_IP_NF_MATCH_CONNTRACK=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_REALM=m -CONFIG_IP_NF_MATCH_SCTP=m -# CONFIG_IP_NF_MATCH_DCCP is not set -CONFIG_IP_NF_MATCH_COMMENT=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m -# CONFIG_IP_NF_MATCH_STRING is not set CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -# CONFIG_IP_NF_TARGET_NFQUEUE is not set -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -# CONFIG_IP_NF_TARGET_MASQUERADE is not set -# CONFIG_IP_NF_TARGET_REDIRECT is not set -# CONFIG_IP_NF_TARGET_NETMAP is not set -# CONFIG_IP_NF_TARGET_SAME is not set -# CONFIG_IP_NF_NAT_SNMP_BASIC is not set -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_AMANDA=m CONFIG_IP_NF_MANGLE=m -# CONFIG_IP_NF_TARGET_TOS is not set # CONFIG_IP_NF_TARGET_ECN is not set -# CONFIG_IP_NF_TARGET_DSCP is not set -# CONFIG_IP_NF_TARGET_MARK is not set -# CONFIG_IP_NF_TARGET_CLASSIFY is not set # CONFIG_IP_NF_TARGET_TTL is not set CONFIG_IP_NF_RAW=m -# CONFIG_IP_NF_TARGET_NOTRACK is not set CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_LIMIT=m -CONFIG_IP6_NF_MATCH_MAC=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +# CONFIG_IP6_NF_MATCH_AH is not set +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_MULTIPORT=m -CONFIG_IP6_NF_MATCH_OWNER=m -CONFIG_IP6_NF_MATCH_MARK=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AHESP=m -CONFIG_IP6_NF_MATCH_LENGTH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_MATCH_MH is not set +CONFIG_IP6_NF_MATCH_RT=m # CONFIG_IP6_NF_TARGET_LOG is not set +CONFIG_IP6_NF_FILTER=m # CONFIG_IP6_NF_TARGET_REJECT is not set -# CONFIG_IP6_NF_TARGET_NFQUEUE is not set CONFIG_IP6_NF_MANGLE=m -# CONFIG_IP6_NF_TARGET_MARK is not set # CONFIG_IP6_NF_TARGET_HL is not set CONFIG_IP6_NF_RAW=m - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -376,21 +485,16 @@ CONFIG_IP6_NF_RAW=m # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set CONFIG_IRDA=m # @@ -420,27 +524,17 @@ CONFIG_IRCOMM=m # # Dongle support # - -# -# Old SIR device drivers -# -# CONFIG_IRPORT_SIR is not set - -# -# Old Serial dongle support -# +# CONFIG_KINGSUN_DONGLE is not set +# CONFIG_KSDAZZLE_DONGLE is not set +# CONFIG_KS959_DONGLE is not set # # FIR device drivers # # CONFIG_USB_IRDA is not set # CONFIG_SIGMATEL_FIR is not set -# CONFIG_NSC_FIR is not set -# CONFIG_WINBOND_FIR is not set -# CONFIG_SMC_IRCC_FIR is not set -# CONFIG_ALI_FIR is not set -# CONFIG_VIA_FIR is not set CONFIG_PXA_FICP=m +# CONFIG_MCS_FIR is not set CONFIG_BT=m CONFIG_BT_L2CAP=m CONFIG_BT_SCO=m @@ -456,9 +550,12 @@ CONFIG_BT_HIDP=m # CONFIG_BT_HCIUSB=m # CONFIG_BT_HCIUSB_SCO is not set +# CONFIG_BT_HCIBTUSB is not set +# CONFIG_BT_HCIBTSDIO is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y +# CONFIG_BT_HCIUART_LL is not set CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m @@ -467,11 +564,20 @@ CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m # CONFIG_IEEE80211_CRYPT_CCMP is not set # CONFIG_IEEE80211_CRYPT_TKIP is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -480,19 +586,16 @@ CONFIG_IEEE80211_CRYPT_WEP=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -500,16 +603,20 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -534,16 +641,18 @@ CONFIG_MTD_ROM=y # Mapping drivers for chip access # CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_SHARP_SL=y # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLOCK2MTD is not set # @@ -552,78 +661,66 @@ CONFIG_MTD_SHARP_SL=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_H1900 is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set CONFIG_MTD_NAND_SHARPSL=y # CONFIG_MTD_NAND_NANDSIM is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_UB is not set # CONFIG_BLK_DEV_RAM is not set -CONFIG_BLK_DEV_RAM_COUNT=16 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECS=y # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set +# CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y # @@ -643,121 +740,76 @@ CONFIG_CHR_DEV_SG=m CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # -# SCSI Transport Attributes +# SCSI Transports # # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set -# CONFIG_SCSI_SATA is not set # CONFIG_SCSI_DEBUG is not set - -# -# PCMCIA SCSI adapter support -# -# CONFIG_PCMCIA_AHA152X is not set -# CONFIG_PCMCIA_FDOMAIN is not set -# CONFIG_PCMCIA_NINJA_SCSI is not set -# CONFIG_PCMCIA_QLOGIC is not set -# CONFIG_PCMCIA_SYM53C500 is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DH is not set +# CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=m +# CONFIG_AX88796 is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set -# CONFIG_PCMCIA_WAVELAN is not set -# CONFIG_PCMCIA_NETWAVE is not set - -# -# Wireless 802.11 Frequency Hopping cards support -# -# CONFIG_PCMCIA_RAYCS is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -CONFIG_HERMES=m -# CONFIG_ATMEL is not set - -# -# Wireless 802.11b Pcmcia/Cardbus cards support -# -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -# CONFIG_AIRO_CS is not set -# CONFIG_PCMCIA_WL3501 is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_CS=m -CONFIG_NET_WIRELESS=y - -# -# PCMCIA network device support +# USB Network Adapters # +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +# CONFIG_USB_NET_PLUSB is not set +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m CONFIG_NET_PCMCIA=y # CONFIG_PCMCIA_3C589 is not set # CONFIG_PCMCIA_3C574 is not set @@ -767,10 +819,6 @@ CONFIG_PCMCIA_PCNET=m # CONFIG_PCMCIA_SMC91C92 is not set # CONFIG_PCMCIA_XIRC2PS is not set # CONFIG_PCMCIA_AXNET is not set - -# -# Wan interfaces -# # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -781,31 +829,29 @@ CONFIG_PPP_ASYNC=m CONFIG_PPP_BSDCOMP=m # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set +CONFIG_SLHC=m # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set # # Input device support # CONFIG_INPUT=y +CONFIG_INPUT_FF_MEMLESS=m +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set -# CONFIG_INPUT_POWER is not set +# CONFIG_INPUT_APMPOWER is not set # # Input Device Drivers @@ -816,17 +862,35 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_LKKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set # CONFIG_KEYBOARD_CORGI is not set CONFIG_KEYBOARD_SPITZ=y +# CONFIG_KEYBOARD_PXA27x is not set +# CONFIG_KEYBOARD_GPIO is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_CORGI=y +CONFIG_TOUCHSCREEN_ADS7846=y +# CONFIG_TOUCHSCREEN_CORGI is not set +# CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set +# CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set +# CONFIG_TOUCHSCREEN_PENMOUNT is not set +# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set +# CONFIG_TOUCHSCREEN_TOUCHWIN is not set +# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set +# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set CONFIG_INPUT_MISC=y +# CONFIG_INPUT_ATI_REMOTE is not set +# CONFIG_INPUT_ATI_REMOTE2 is not set +# CONFIG_INPUT_KEYSPAN_REMOTE is not set +# CONFIG_INPUT_POWERMATE is not set +# CONFIG_INPUT_YEALINK is not set +# CONFIG_INPUT_CM109 is not set CONFIG_INPUT_UINPUT=m # @@ -839,8 +903,11 @@ CONFIG_INPUT_UINPUT=m # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -849,6 +916,7 @@ CONFIG_HW_CONSOLE=y CONFIG_SERIAL_8250=m CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 # CONFIG_SERIAL_8250_EXTENDED is not set # @@ -860,101 +928,253 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set +CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set -# CONFIG_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # -# Ftape, the floppy tape device driver -# - -# # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_CARDMAN_4000 is not set # CONFIG_CARDMAN_4040 is not set +# CONFIG_IPWIRELESS is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set CONFIG_I2C_PXA=y # CONFIG_I2C_PXA_SLAVE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# # CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set # CONFIG_I2C_STUB is not set -# CONFIG_I2C_PCA_ISA is not set # -# Hardware Monitoring support +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +CONFIG_SPI_PXA2XX=y + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: # +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADCXX is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +CONFIG_SENSORS_MAX1111=y +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Multimedia Capabilities Port drivers +# Multifunction device drivers # +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set # CONFIG_FB_MODE_HELPERS is not set # CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# # CONFIG_FB_S1D13XXX is not set CONFIG_FB_PXA=y +# CONFIG_FB_PXA_SMARTPANEL is not set # CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_MBX is not set # CONFIG_FB_W100 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_CORGI=y +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set +# CONFIG_LCD_PLATFORM is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +# CONFIG_BACKLIGHT_CORGI is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -962,6 +1182,7 @@ CONFIG_FB_PXA=y # CONFIG_VGA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y CONFIG_FONT_8x8=y @@ -974,55 +1195,96 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_SUN8x16 is not set # CONFIG_FONT_SUN12x22 is not set # CONFIG_FONT_10x18 is not set +# CONFIG_LOGO is not set +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# Logo configuration +# USB Input Devices # -# CONFIG_LOGO is not set -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_DEVICE=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_LCD_DEVICE=y -CONFIG_BACKLIGHT_CORGI=y +CONFIG_USB_HID=m +# CONFIG_HID_PID is not set +# CONFIG_USB_HIDDEV is not set # -# Sound +# USB HID Boot Protocol drivers # -# CONFIG_SOUND is not set +CONFIG_USB_KBD=m +CONFIG_USB_MOUSE=m # -# USB support -# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BRIGHT=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DELL=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y +# CONFIG_USB_ARCH_HAS_EHCI is not set CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SL811_HCD=m CONFIG_USB_SL811_CS=m +# CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_MUSB_HDRC is not set +# CONFIG_USB_GADGET_MUSB_HDRC is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1041,33 +1303,11 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=m -CONFIG_USB_HIDINPUT=y -# CONFIG_HID_FF is not set -# CONFIG_USB_HIDDEV is not set - -# -# USB HID Boot Protocol drivers -# -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB_AIPTEK=m -CONFIG_USB_WACOM=m -# CONFIG_USB_ACECAD is not set -CONFIG_USB_KBTAB=m -CONFIG_USB_POWERMATE=m -CONFIG_USB_MTOUCH=m -# CONFIG_USB_ITMTOUCH is not set -CONFIG_USB_EGALAX=m -# CONFIG_USB_YEALINK is not set -CONFIG_USB_XPAD=m -CONFIG_USB_ATI_REMOTE=m -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set +# CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set +# CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices @@ -1076,51 +1316,22 @@ CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m # -# USB Multimedia devices -# -CONFIG_USB_DABUSB=m - -# -# Video4Linux support is needed for USB Multimedia device support -# - -# -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -# CONFIG_USB_NET_PLUSB is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -# CONFIG_USB_ZD1201 is not set -CONFIG_USB_MON=y - -# # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +CONFIG_USB_EZUSB=y CONFIG_USB_SERIAL_GENERIC=y -# CONFIG_USB_SERIAL_AIRPRIME is not set -# CONFIG_USB_SERIAL_ANYDATA is not set +# CONFIG_USB_SERIAL_AIRCABLE is not set +# CONFIG_USB_SERIAL_ARK3116 is not set CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m # CONFIG_USB_SERIAL_CP2101 is not set CONFIG_USB_SERIAL_CYPRESS_M8=m CONFIG_USB_SERIAL_EMPEG=m CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_FUNSOFT is not set CONFIG_USB_SERIAL_VISOR=m CONFIG_USB_SERIAL_IPAQ=m CONFIG_USB_SERIAL_IR=m @@ -1128,6 +1339,7 @@ CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m +# CONFIG_USB_SERIAL_IUU is not set CONFIG_USB_SERIAL_KEYSPAN_PDA=m CONFIG_USB_SERIAL_KEYSPAN=m # CONFIG_USB_SERIAL_KEYSPAN_MPR is not set @@ -1145,49 +1357,66 @@ CONFIG_USB_SERIAL_KEYSPAN=m CONFIG_USB_SERIAL_KLSI=m CONFIG_USB_SERIAL_KOBIL_SCT=m CONFIG_USB_SERIAL_MCT_U232=m +# CONFIG_USB_SERIAL_MOS7720 is not set +# CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set +# CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m # CONFIG_USB_SERIAL_SAFE_PADDED is not set +# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m # CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_EZUSB=y +# CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers # CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m -CONFIG_USB_AUERSWALD=m +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set CONFIG_USB_RIO500=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m +# CONFIG_USB_BERRY_CHARGE is not set CONFIG_USB_LED=m +# CONFIG_USB_CYPRESS_CY7C63 is not set CONFIG_USB_CYTHERM=m -CONFIG_USB_PHIDGETKIT=m -CONFIG_USB_PHIDGETSERVO=m +# CONFIG_USB_PHIDGET is not set CONFIG_USB_IDMOUSE=m +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=m +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -# CONFIG_USB_GADGET_GOKU is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set +# CONFIG_USB_GADGET_FSL_USB2 is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set CONFIG_USB_GADGET_DUMMY_HCD=y CONFIG_USB_DUMMY_HCD=m CONFIG_USB_GADGET_DUALSPEED=y @@ -1198,15 +1427,42 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m +# CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card support +# MMC/SD/SDIO Card Drivers # -CONFIG_MMC=y -# CONFIG_MMC_DEBUG is not set CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# CONFIG_MMC_PXA=y -# CONFIG_MMC_WBSD is not set +# CONFIG_MMC_SDHCI is not set +# CONFIG_MMC_SPI is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set # # File systems @@ -1218,18 +1474,19 @@ CONFIG_EXT2_FS_SECURITY=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1254,11 +1511,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -# CONFIG_RELAYFS_FS is not set +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems @@ -1270,39 +1529,42 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set CONFIG_JFFS2_SUMMARY=y +# CONFIG_JFFS2_FS_XATTR is not set CONFIG_JFFS2_COMPRESSION_OPTIONS=y CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y CONFIG_JFFS2_RUBIN=y # CONFIG_JFFS2_CMODE_NONE is not set CONFIG_JFFS2_CMODE_PRIORITY=y # CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_JFFS2_CMODE_FAVOURLZO is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m CONFIG_SUNRPC_GSS=m +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=m # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1312,7 +1574,6 @@ CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1332,11 +1593,9 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set # CONFIG_SUN_PARTITION is not set +# CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y @@ -1377,35 +1636,71 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m +# CONFIG_DLM is not set # # Kernel hacking # # CONFIG_PRINTK_TIME is not set -CONFIG_DEBUG_KERNEL=y +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y -CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set -# CONFIG_DEBUG_SLAB is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_DEBUG_USER is not set CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set CONFIG_DEBUG_LL=y # CONFIG_DEBUG_ICEDCC is not set @@ -1414,46 +1709,113 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_FIPS is not set +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_DES=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_TEST=m +# CONFIG_CRYPTO_LZO is not set # -# Hardware crypto devices +# Random Number Generation # +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h index 5001390be958..d3f0a9eee9f6 100644 --- a/arch/arm/include/asm/div64.h +++ b/arch/arm/include/asm/div64.h @@ -165,7 +165,7 @@ __res = __m; \ asm ( "umlal %Q0, %R0, %Q1, %Q2\n\t" \ "mov %Q0, #0" \ - : "+r" (__res) \ + : "+&r" (__res) \ : "r" (__m), "r" (__n) \ : "cc" ); \ } else { \ @@ -182,7 +182,7 @@ "umlal %R0, %Q0, %Q1, %R2\n\t" \ "mov %R0, #0\n\t" \ "umlal %Q0, %R0, %R1, %R2" \ - : "+r" (__res) \ + : "+&r" (__res) \ : "r" (__m), "r" (__n) \ : "cc" ); \ } else { \ @@ -192,7 +192,7 @@ "adds %Q0, %1, %Q0\n\t" \ "adc %R0, %R0, #0\n\t" \ "umlal %Q0, %R0, %R2, %R3" \ - : "+r" (__res), "+r" (__z) \ + : "+&r" (__res), "+&r" (__z) \ : "r" (__m), "r" (__n) \ : "cc" ); \ } \ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 7e5ebb5bdd17..9b0447c3d59b 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -404,6 +404,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) } pin = bank->chipbase; + gpio = &irq_desc[pin]; while (isr) { if (isr & 1) { diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile index e14bf40bfb07..b96c55dad343 100644 --- a/arch/arm/mach-kirkwood/Makefile +++ b/arch/arm/mach-kirkwood/Makefile @@ -2,4 +2,4 @@ obj-y += common.o addr-map.o irq.o pcie.o obj-$(CONFIG_MACH_DB88F6281_BP) += db88f6281-bp-setup.o obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6192-nas-setup.o -obj-$(CONFIG_MACH_RD88F6192_NAS) += rd88f6281-setup.o +obj-$(CONFIG_MACH_RD88F6281) += rd88f6281-setup.o diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 3553babbbf05..d140abca690a 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -1,18 +1,13 @@ -if ARCH_MSM7X00A +if ARCH_MSM -comment "MSM7X00A Board Type" - depends on ARCH_MSM7X00A +comment "MSM Board Type" + depends on ARCH_MSM config MACH_HALIBUT - depends on ARCH_MSM7X00A + depends on ARCH_MSM default y - bool "Halibut Board (QCT SURF7200A)" + bool "Halibut Board (QCT SURF7201A)" help - Support for the Qualcomm SURF7200A eval board. - -config MSM7X00A_IDLE - depends on ARCH_MSM7X00A - default y - bool "Idle Support for MSM7X00A" + Support for the Qualcomm SURF7201A eval board. endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index d12f23655850..1aa47001aa3b 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -1,7 +1,8 @@ obj-y += io.o idle.o irq.o timer.o dma.o - -# Common code for board init -obj-y += common.o +obj-y += devices.o +obj-y += proc_comm.o +obj-y += vreg.o +obj-y += clock.o clock-7x01a.o obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index a24259133e07..c2a96e3965a6 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -33,6 +33,8 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> +#include "devices.h" + static struct resource smc91x_resources[] = { [0] = { .start = 0x9C004300, @@ -53,31 +55,12 @@ static struct platform_device smc91x_device = { .resource = smc91x_resources, }; -static void mddi0_panel_power(int on) -{ -} - -static struct msm_mddi_platform_data msm_mddi0_pdata = { - .panel_power = mddi0_panel_power, - .has_vsync_irq = 0, -}; - -static struct platform_device msm_mddi0_device = { - .name = "msm_mddi", - .id = 0, - .dev = { - .platform_data = &msm_mddi0_pdata - }, -}; - -static struct platform_device msm_serial0_device = { - .name = "msm_serial", - .id = 0, -}; - static struct platform_device *devices[] __initdata = { - &msm_serial0_device, - &msm_mddi0_device, + &msm_device_uart3, + &msm_device_smd, + &msm_device_nand, + &msm_device_hsusb, + &msm_device_i2c, &smc91x_device, }; @@ -91,20 +74,15 @@ static void __init halibut_init_irq(void) static void __init halibut_init(void) { platform_add_devices(devices, ARRAY_SIZE(devices)); - msm_add_devices(); } static void __init halibut_map_io(void) { msm_map_common_io(); + msm_clock_init(); } MACHINE_START(HALIBUT, "Halibut Board (QCT SURF7200A)") - -/* UART for LL DEBUG */ - .phys_io = MSM_UART1_PHYS, - .io_pg_offst = ((MSM_UART1_BASE) >> 18) & 0xfffc, - .boot_params = 0x10000100, .map_io = halibut_map_io, .init_irq = halibut_init_irq, diff --git a/arch/arm/mach-msm/clock-7x01a.c b/arch/arm/mach-msm/clock-7x01a.c new file mode 100644 index 000000000000..62230a3428ee --- /dev/null +++ b/arch/arm/mach-msm/clock-7x01a.c @@ -0,0 +1,126 @@ +/* arch/arm/mach-msm/clock-7x01a.c + * + * Clock tables for MSM7X01A + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2007 QUALCOMM Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include "clock.h" +#include "devices.h" + +/* clock IDs used by the modem processor */ + +#define ACPU_CLK 0 /* Applications processor clock */ +#define ADM_CLK 1 /* Applications data mover clock */ +#define ADSP_CLK 2 /* ADSP clock */ +#define EBI1_CLK 3 /* External bus interface 1 clock */ +#define EBI2_CLK 4 /* External bus interface 2 clock */ +#define ECODEC_CLK 5 /* External CODEC clock */ +#define EMDH_CLK 6 /* External MDDI host clock */ +#define GP_CLK 7 /* General purpose clock */ +#define GRP_CLK 8 /* Graphics clock */ +#define I2C_CLK 9 /* I2C clock */ +#define ICODEC_RX_CLK 10 /* Internal CODEX RX clock */ +#define ICODEC_TX_CLK 11 /* Internal CODEX TX clock */ +#define IMEM_CLK 12 /* Internal graphics memory clock */ +#define MDC_CLK 13 /* MDDI client clock */ +#define MDP_CLK 14 /* Mobile display processor clock */ +#define PBUS_CLK 15 /* Peripheral bus clock */ +#define PCM_CLK 16 /* PCM clock */ +#define PMDH_CLK 17 /* Primary MDDI host clock */ +#define SDAC_CLK 18 /* Stereo DAC clock */ +#define SDC1_CLK 19 /* Secure Digital Card clocks */ +#define SDC1_PCLK 20 +#define SDC2_CLK 21 +#define SDC2_PCLK 22 +#define SDC3_CLK 23 +#define SDC3_PCLK 24 +#define SDC4_CLK 25 +#define SDC4_PCLK 26 +#define TSIF_CLK 27 /* Transport Stream Interface clocks */ +#define TSIF_REF_CLK 28 +#define TV_DAC_CLK 29 /* TV clocks */ +#define TV_ENC_CLK 30 +#define UART1_CLK 31 /* UART clocks */ +#define UART2_CLK 32 +#define UART3_CLK 33 +#define UART1DM_CLK 34 +#define UART2DM_CLK 35 +#define USB_HS_CLK 36 /* High speed USB core clock */ +#define USB_HS_PCLK 37 /* High speed USB pbus clock */ +#define USB_OTG_CLK 38 /* Full speed USB clock */ +#define VDC_CLK 39 /* Video controller clock */ +#define VFE_CLK 40 /* Camera / Video Front End clock */ +#define VFE_MDC_CLK 41 /* VFE MDDI client clock */ + +#define NR_CLKS 42 + +#define CLOCK(clk_name, clk_id, clk_dev, clk_flags) { \ + .name = clk_name, \ + .id = clk_id, \ + .flags = clk_flags, \ + .dev = clk_dev, \ + } + +#define OFF CLKFLAG_AUTO_OFF +#define MINMAX CLKFLAG_USE_MIN_MAX_TO_SET + +struct clk msm_clocks[] = { + CLOCK("adm_clk", ADM_CLK, NULL, 0), + CLOCK("adsp_clk", ADSP_CLK, NULL, 0), + CLOCK("ebi1_clk", EBI1_CLK, NULL, 0), + CLOCK("ebi2_clk", EBI2_CLK, NULL, 0), + CLOCK("ecodec_clk", ECODEC_CLK, NULL, 0), + CLOCK("emdh_clk", EMDH_CLK, NULL, OFF), + CLOCK("gp_clk", GP_CLK, NULL, 0), + CLOCK("grp_clk", GRP_CLK, NULL, OFF), + CLOCK("i2c_clk", I2C_CLK, &msm_device_i2c.dev, 0), + CLOCK("icodec_rx_clk", ICODEC_RX_CLK, NULL, 0), + CLOCK("icodec_tx_clk", ICODEC_TX_CLK, NULL, 0), + CLOCK("imem_clk", IMEM_CLK, NULL, OFF), + CLOCK("mdc_clk", MDC_CLK, NULL, 0), + CLOCK("mdp_clk", MDP_CLK, NULL, OFF), + CLOCK("pbus_clk", PBUS_CLK, NULL, 0), + CLOCK("pcm_clk", PCM_CLK, NULL, 0), + CLOCK("pmdh_clk", PMDH_CLK, NULL, OFF | MINMAX), + CLOCK("sdac_clk", SDAC_CLK, NULL, OFF), + CLOCK("sdc_clk", SDC1_CLK, &msm_device_sdc1.dev, OFF), + CLOCK("sdc_pclk", SDC1_PCLK, &msm_device_sdc1.dev, OFF), + CLOCK("sdc_clk", SDC2_CLK, &msm_device_sdc2.dev, OFF), + CLOCK("sdc_pclk", SDC2_PCLK, &msm_device_sdc2.dev, OFF), + CLOCK("sdc_clk", SDC3_CLK, &msm_device_sdc3.dev, OFF), + CLOCK("sdc_pclk", SDC3_PCLK, &msm_device_sdc3.dev, OFF), + CLOCK("sdc_clk", SDC4_CLK, &msm_device_sdc4.dev, OFF), + CLOCK("sdc_pclk", SDC4_PCLK, &msm_device_sdc4.dev, OFF), + CLOCK("tsif_clk", TSIF_CLK, NULL, 0), + CLOCK("tsif_ref_clk", TSIF_REF_CLK, NULL, 0), + CLOCK("tv_dac_clk", TV_DAC_CLK, NULL, 0), + CLOCK("tv_enc_clk", TV_ENC_CLK, NULL, 0), + CLOCK("uart_clk", UART1_CLK, &msm_device_uart1.dev, OFF), + CLOCK("uart_clk", UART2_CLK, &msm_device_uart2.dev, 0), + CLOCK("uart_clk", UART3_CLK, &msm_device_uart3.dev, OFF), + CLOCK("uart1dm_clk", UART1DM_CLK, NULL, OFF), + CLOCK("uart2dm_clk", UART2DM_CLK, NULL, 0), + CLOCK("usb_hs_clk", USB_HS_CLK, &msm_device_hsusb.dev, OFF), + CLOCK("usb_hs_pclk", USB_HS_PCLK, &msm_device_hsusb.dev, OFF), + CLOCK("usb_otg_clk", USB_OTG_CLK, NULL, 0), + CLOCK("vdc_clk", VDC_CLK, NULL, OFF | MINMAX), + CLOCK("vfe_clk", VFE_CLK, NULL, OFF), + CLOCK("vfe_mdc_clk", VFE_MDC_CLK, NULL, OFF), +}; + +unsigned msm_num_clocks = ARRAY_SIZE(msm_clocks); diff --git a/arch/arm/mach-msm/clock.c b/arch/arm/mach-msm/clock.c new file mode 100644 index 000000000000..3b1ce36f1032 --- /dev/null +++ b/arch/arm/mach-msm/clock.c @@ -0,0 +1,218 @@ +/* arch/arm/mach-msm/clock.c + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2007 QUALCOMM Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/list.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/spinlock.h> + +#include "clock.h" +#include "proc_comm.h" + +static DEFINE_MUTEX(clocks_mutex); +static DEFINE_SPINLOCK(clocks_lock); +static LIST_HEAD(clocks); + +/* + * glue for the proc_comm interface + */ +static inline int pc_clk_enable(unsigned id) +{ + return msm_proc_comm(PCOM_CLKCTL_RPC_ENABLE, &id, NULL); +} + +static inline void pc_clk_disable(unsigned id) +{ + msm_proc_comm(PCOM_CLKCTL_RPC_DISABLE, &id, NULL); +} + +static inline int pc_clk_set_rate(unsigned id, unsigned rate) +{ + return msm_proc_comm(PCOM_CLKCTL_RPC_SET_RATE, &id, &rate); +} + +static inline int pc_clk_set_min_rate(unsigned id, unsigned rate) +{ + return msm_proc_comm(PCOM_CLKCTL_RPC_MIN_RATE, &id, &rate); +} + +static inline int pc_clk_set_max_rate(unsigned id, unsigned rate) +{ + return msm_proc_comm(PCOM_CLKCTL_RPC_MAX_RATE, &id, &rate); +} + +static inline int pc_clk_set_flags(unsigned id, unsigned flags) +{ + return msm_proc_comm(PCOM_CLKCTL_RPC_SET_FLAGS, &id, &flags); +} + +static inline unsigned pc_clk_get_rate(unsigned id) +{ + if (msm_proc_comm(PCOM_CLKCTL_RPC_RATE, &id, NULL)) + return 0; + else + return id; +} + +static inline unsigned pc_clk_is_enabled(unsigned id) +{ + if (msm_proc_comm(PCOM_CLKCTL_RPC_ENABLED, &id, NULL)) + return 0; + else + return id; +} + +static inline int pc_pll_request(unsigned id, unsigned on) +{ + on = !!on; + return msm_proc_comm(PCOM_CLKCTL_RPC_PLL_REQUEST, &id, &on); +} + +/* + * Standard clock functions defined in include/linux/clk.h + */ +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *clk; + + mutex_lock(&clocks_mutex); + + list_for_each_entry(clk, &clocks, list) + if (!strcmp(id, clk->name) && clk->dev == dev) + goto found_it; + + list_for_each_entry(clk, &clocks, list) + if (!strcmp(id, clk->name) && clk->dev == NULL) + goto found_it; + + clk = ERR_PTR(-ENOENT); +found_it: + mutex_unlock(&clocks_mutex); + return clk; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + spin_lock_irqsave(&clocks_lock, flags); + clk->count++; + if (clk->count == 1) + pc_clk_enable(clk->id); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + spin_lock_irqsave(&clocks_lock, flags); + BUG_ON(clk->count == 0); + clk->count--; + if (clk->count == 0) + pc_clk_disable(clk->id); + spin_unlock_irqrestore(&clocks_lock, flags); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + return pc_clk_get_rate(clk->id); +} +EXPORT_SYMBOL(clk_get_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret; + if (clk->flags & CLKFLAG_USE_MIN_MAX_TO_SET) { + ret = pc_clk_set_max_rate(clk->id, rate); + if (ret) + return ret; + return pc_clk_set_min_rate(clk->id, rate); + } + return pc_clk_set_rate(clk->id, rate); +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + return -ENOSYS; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + return ERR_PTR(-ENOSYS); +} +EXPORT_SYMBOL(clk_get_parent); + +int clk_set_flags(struct clk *clk, unsigned long flags) +{ + if (clk == NULL || IS_ERR(clk)) + return -EINVAL; + return pc_clk_set_flags(clk->id, flags); +} +EXPORT_SYMBOL(clk_set_flags); + + +void __init msm_clock_init(void) +{ + unsigned n; + + spin_lock_init(&clocks_lock); + mutex_lock(&clocks_mutex); + for (n = 0; n < msm_num_clocks; n++) + list_add_tail(&msm_clocks[n].list, &clocks); + mutex_unlock(&clocks_mutex); +} + +/* The bootloader and/or AMSS may have left various clocks enabled. + * Disable any clocks that belong to us (CLKFLAG_AUTO_OFF) but have + * not been explicitly enabled by a clk_enable() call. + */ +static int __init clock_late_init(void) +{ + unsigned long flags; + struct clk *clk; + unsigned count = 0; + + mutex_lock(&clocks_mutex); + list_for_each_entry(clk, &clocks, list) { + if (clk->flags & CLKFLAG_AUTO_OFF) { + spin_lock_irqsave(&clocks_lock, flags); + if (!clk->count) { + count++; + pc_clk_disable(clk->id); + } + spin_unlock_irqrestore(&clocks_lock, flags); + } + } + mutex_unlock(&clocks_mutex); + pr_info("clock_late_init() disabled %d unused clocks\n", count); + return 0; +} + +late_initcall(clock_late_init); diff --git a/arch/arm/mach-msm/clock.h b/arch/arm/mach-msm/clock.h new file mode 100644 index 000000000000..f875e1544e5f --- /dev/null +++ b/arch/arm/mach-msm/clock.h @@ -0,0 +1,48 @@ +/* arch/arm/mach-msm/clock.h + * + * Copyright (C) 2007 Google, Inc. + * Copyright (c) 2007 QUALCOMM Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_MSM_CLOCK_H +#define __ARCH_ARM_MACH_MSM_CLOCK_H + +#include <linux/list.h> + +#define CLKFLAG_INVERT 0x00000001 +#define CLKFLAG_NOINVERT 0x00000002 +#define CLKFLAG_NONEST 0x00000004 +#define CLKFLAG_NORESET 0x00000008 + +#define CLK_FIRST_AVAILABLE_FLAG 0x00000100 +#define CLKFLAG_USE_MIN_MAX_TO_SET 0x00000200 +#define CLKFLAG_AUTO_OFF 0x00000400 + +struct clk { + uint32_t id; + uint32_t count; + uint32_t flags; + const char *name; + struct list_head list; + struct device *dev; +}; + +#define A11S_CLK_CNTL_ADDR (MSM_CSR_BASE + 0x100) +#define A11S_CLK_SEL_ADDR (MSM_CSR_BASE + 0x104) +#define A11S_VDD_SVS_PLEVEL_ADDR (MSM_CSR_BASE + 0x124) + +extern struct clk msm_clocks[]; +extern unsigned msm_num_clocks; + +#endif + diff --git a/arch/arm/mach-msm/common.c b/arch/arm/mach-msm/common.c deleted file mode 100644 index 604f8ade9587..000000000000 --- a/arch/arm/mach-msm/common.c +++ /dev/null @@ -1,116 +0,0 @@ -/* linux/arch/arm/mach-msm/common.c - * - * Common setup code for MSM7K Boards - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <asm/mach/flash.h> - -#include <asm/setup.h> - -#include <linux/mtd/nand.h> -#include <linux/mtd/partitions.h> - -#include <mach/msm_iomap.h> - -#include <mach/board.h> - -struct flash_platform_data msm_nand_data = { - .parts = 0, - .nr_parts = 0, -}; - -static struct resource msm_nand_resources[] = { - [0] = { - .start = 7, - .end = 7, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device msm_nand_device = { - .name = "msm_nand", - .id = -1, - .num_resources = ARRAY_SIZE(msm_nand_resources), - .resource = msm_nand_resources, - .dev = { - .platform_data = &msm_nand_data, - }, -}; - -static struct platform_device msm_smd_device = { - .name = "msm_smd", - .id = -1, -}; - -static struct resource msm_i2c_resources[] = { - { - .start = MSM_I2C_BASE, - .end = MSM_I2C_BASE + MSM_I2C_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_PWB_I2C, - .end = INT_PWB_I2C, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device msm_i2c_device = { - .name = "msm_i2c", - .id = 0, - .num_resources = ARRAY_SIZE(msm_i2c_resources), - .resource = msm_i2c_resources, -}; - -static struct resource usb_resources[] = { - { - .start = MSM_HSUSB_PHYS, - .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, - .flags = IORESOURCE_MEM, - }, - { - .start = INT_USB_HS, - .end = INT_USB_HS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device msm_hsusb_device = { - .name = "msm_hsusb", - .id = -1, - .num_resources = ARRAY_SIZE(usb_resources), - .resource = usb_resources, - .dev = { - .coherent_dma_mask = 0xffffffff, - }, -}; - -static struct platform_device *devices[] __initdata = { - &msm_nand_device, - &msm_smd_device, - &msm_i2c_device, - &msm_hsusb_device, -}; - -void __init msm_add_devices(void) -{ - platform_add_devices(devices, ARRAY_SIZE(devices)); -} diff --git a/arch/arm/mach-msm/devices.c b/arch/arm/mach-msm/devices.c new file mode 100644 index 000000000000..f2a74b92a97f --- /dev/null +++ b/arch/arm/mach-msm/devices.c @@ -0,0 +1,267 @@ +/* linux/arch/arm/mach-msm/devices.c + * + * Copyright (C) 2008 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/msm_iomap.h> +#include "devices.h" + +#include <asm/mach/flash.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> + +static struct resource resources_uart1[] = { + { + .start = INT_UART1, + .end = INT_UART1, + .flags = IORESOURCE_IRQ, + }, + { + .start = MSM_UART1_PHYS, + .end = MSM_UART1_PHYS + MSM_UART1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource resources_uart2[] = { + { + .start = INT_UART2, + .end = INT_UART2, + .flags = IORESOURCE_IRQ, + }, + { + .start = MSM_UART2_PHYS, + .end = MSM_UART2_PHYS + MSM_UART2_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct resource resources_uart3[] = { + { + .start = INT_UART3, + .end = INT_UART3, + .flags = IORESOURCE_IRQ, + }, + { + .start = MSM_UART3_PHYS, + .end = MSM_UART3_PHYS + MSM_UART3_SIZE - 1, + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device msm_device_uart1 = { + .name = "msm_serial", + .id = 0, + .num_resources = ARRAY_SIZE(resources_uart1), + .resource = resources_uart1, +}; + +struct platform_device msm_device_uart2 = { + .name = "msm_serial", + .id = 1, + .num_resources = ARRAY_SIZE(resources_uart2), + .resource = resources_uart2, +}; + +struct platform_device msm_device_uart3 = { + .name = "msm_serial", + .id = 2, + .num_resources = ARRAY_SIZE(resources_uart3), + .resource = resources_uart3, +}; + +static struct resource resources_i2c[] = { + { + .start = MSM_I2C_PHYS, + .end = MSM_I2C_PHYS + MSM_I2C_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_PWB_I2C, + .end = INT_PWB_I2C, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device msm_device_i2c = { + .name = "msm_i2c", + .id = 0, + .num_resources = ARRAY_SIZE(resources_i2c), + .resource = resources_i2c, +}; + +static struct resource resources_hsusb[] = { + { + .start = MSM_HSUSB_PHYS, + .end = MSM_HSUSB_PHYS + MSM_HSUSB_SIZE, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_USB_HS, + .end = INT_USB_HS, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device msm_device_hsusb = { + .name = "msm_hsusb", + .id = -1, + .num_resources = ARRAY_SIZE(resources_hsusb), + .resource = resources_hsusb, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct flash_platform_data msm_nand_data = { + .parts = NULL, + .nr_parts = 0, +}; + +static struct resource resources_nand[] = { + [0] = { + .start = 7, + .end = 7, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device msm_device_nand = { + .name = "msm_nand", + .id = -1, + .num_resources = ARRAY_SIZE(resources_nand), + .resource = resources_nand, + .dev = { + .platform_data = &msm_nand_data, + }, +}; + +struct platform_device msm_device_smd = { + .name = "msm_smd", + .id = -1, +}; + +static struct resource resources_sdc1[] = { + { + .start = MSM_SDC1_PHYS, + .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_SDC1_0, + .end = INT_SDC1_1, + .flags = IORESOURCE_IRQ, + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource resources_sdc2[] = { + { + .start = MSM_SDC2_PHYS, + .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_SDC2_0, + .end = INT_SDC2_1, + .flags = IORESOURCE_IRQ, + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource resources_sdc3[] = { + { + .start = MSM_SDC3_PHYS, + .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_SDC3_0, + .end = INT_SDC3_1, + .flags = IORESOURCE_IRQ, + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_DMA, + }, +}; + +static struct resource resources_sdc4[] = { + { + .start = MSM_SDC4_PHYS, + .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = INT_SDC4_0, + .end = INT_SDC4_1, + .flags = IORESOURCE_IRQ, + }, + { + .start = 8, + .end = 8, + .flags = IORESOURCE_DMA, + }, +}; + +struct platform_device msm_device_sdc1 = { + .name = "msm_sdcc", + .id = 1, + .num_resources = ARRAY_SIZE(resources_sdc1), + .resource = resources_sdc1, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device msm_device_sdc2 = { + .name = "msm_sdcc", + .id = 2, + .num_resources = ARRAY_SIZE(resources_sdc2), + .resource = resources_sdc2, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device msm_device_sdc3 = { + .name = "msm_sdcc", + .id = 3, + .num_resources = ARRAY_SIZE(resources_sdc3), + .resource = resources_sdc3, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; + +struct platform_device msm_device_sdc4 = { + .name = "msm_sdcc", + .id = 4, + .num_resources = ARRAY_SIZE(resources_sdc4), + .resource = resources_sdc4, + .dev = { + .coherent_dma_mask = 0xffffffff, + }, +}; diff --git a/arch/arm/mach-msm/devices.h b/arch/arm/mach-msm/devices.h new file mode 100644 index 000000000000..0744c4a27d6a --- /dev/null +++ b/arch/arm/mach-msm/devices.h @@ -0,0 +1,36 @@ +/* linux/arch/arm/mach-msm/devices.h + * + * Copyright (C) 2008 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_MSM_DEVICES_H +#define __ARCH_ARM_MACH_MSM_DEVICES_H + +extern struct platform_device msm_device_uart1; +extern struct platform_device msm_device_uart2; +extern struct platform_device msm_device_uart3; + +extern struct platform_device msm_device_sdc1; +extern struct platform_device msm_device_sdc2; +extern struct platform_device msm_device_sdc3; +extern struct platform_device msm_device_sdc4; + +extern struct platform_device msm_device_hsusb; + +extern struct platform_device msm_device_i2c; + +extern struct platform_device msm_device_smd; + +extern struct platform_device msm_device_nand; + +#endif diff --git a/arch/arm/mach-msm/dma.c b/arch/arm/mach-msm/dma.c index 0c8f252637e1..f5420f9585c5 100644 --- a/arch/arm/mach-msm/dma.c +++ b/arch/arm/mach-msm/dma.c @@ -26,7 +26,7 @@ enum { }; static DEFINE_SPINLOCK(msm_dmov_lock); -static struct msm_dmov_cmd active_command; +static unsigned int channel_active; static struct list_head ready_commands[MSM_DMOV_CHANNEL_COUNT]; static struct list_head active_commands[MSM_DMOV_CHANNEL_COUNT]; unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS; @@ -43,6 +43,11 @@ unsigned int msm_dmov_print_mask = MSM_DMOV_PRINT_ERRORS; #define PRINT_FLOW(format, args...) \ MSM_DMOV_DPRINTF(MSM_DMOV_PRINT_FLOW, format, args); +void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful) +{ + writel((graceful << 31), DMOV_FLUSH0(id)); +} + void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) { unsigned long irq_flags; @@ -60,6 +65,9 @@ void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd) #endif PRINT_IO("msm_dmov_enqueue_cmd(%d), start command, status %x\n", id, status); list_add_tail(&cmd->list, &active_commands[id]); + if (!channel_active) + enable_irq(INT_ADM_AARM); + channel_active |= 1U << id; writel(cmd->cmdptr, DMOV_CMD_PTR(id)); } else { if (list_empty(&active_commands[id])) @@ -76,21 +84,19 @@ struct msm_dmov_exec_cmdptr_cmd { struct completion complete; unsigned id; unsigned int result; - unsigned int flush[6]; + struct msm_dmov_errdata err; }; -static void dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, unsigned int result) +static void +dmov_exec_cmdptr_complete_func(struct msm_dmov_cmd *_cmd, + unsigned int result, + struct msm_dmov_errdata *err) { struct msm_dmov_exec_cmdptr_cmd *cmd = container_of(_cmd, struct msm_dmov_exec_cmdptr_cmd, dmov_cmd); cmd->result = result; - if (result != 0x80000002) { - cmd->flush[0] = readl(DMOV_FLUSH0(cmd->id)); - cmd->flush[1] = readl(DMOV_FLUSH1(cmd->id)); - cmd->flush[2] = readl(DMOV_FLUSH2(cmd->id)); - cmd->flush[3] = readl(DMOV_FLUSH3(cmd->id)); - cmd->flush[4] = readl(DMOV_FLUSH4(cmd->id)); - cmd->flush[5] = readl(DMOV_FLUSH5(cmd->id)); - } + if (result != 0x80000002 && err) + memcpy(&cmd->err, err, sizeof(struct msm_dmov_errdata)); + complete(&cmd->complete); } @@ -111,7 +117,7 @@ int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr) if (cmd.result != 0x80000002) { PRINT_ERROR("dmov_exec_cmdptr(%d): ERROR, result: %x\n", id, cmd.result); PRINT_ERROR("dmov_exec_cmdptr(%d): flush: %x %x %x %x\n", - id, cmd.flush[0], cmd.flush[1], cmd.flush[2], cmd.flush[3]); + id, cmd.err.flush[0], cmd.err.flush[1], cmd.err.flush[2], cmd.err.flush[3]); return -EIO; } PRINT_FLOW("dmov_exec_cmdptr(%d, %x) done\n", id, cmdptr); @@ -159,25 +165,40 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) "for %p, result %x\n", id, cmd, ch_result); if (cmd) { list_del(&cmd->list); - cmd->complete_func(cmd, ch_result); + cmd->complete_func(cmd, ch_result, NULL); } } if (ch_result & DMOV_RSLT_FLUSH) { - unsigned int flush0 = readl(DMOV_FLUSH0(id)); + struct msm_dmov_errdata errdata; + + errdata.flush[0] = readl(DMOV_FLUSH0(id)); + errdata.flush[1] = readl(DMOV_FLUSH1(id)); + errdata.flush[2] = readl(DMOV_FLUSH2(id)); + errdata.flush[3] = readl(DMOV_FLUSH3(id)); + errdata.flush[4] = readl(DMOV_FLUSH4(id)); + errdata.flush[5] = readl(DMOV_FLUSH5(id)); PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, flush0); + PRINT_FLOW("msm_datamover_irq_handler id %d, flush, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]); if (cmd) { list_del(&cmd->list); - cmd->complete_func(cmd, ch_result); + cmd->complete_func(cmd, ch_result, &errdata); } } if (ch_result & DMOV_RSLT_ERROR) { - unsigned int flush0 = readl(DMOV_FLUSH0(id)); + struct msm_dmov_errdata errdata; + + errdata.flush[0] = readl(DMOV_FLUSH0(id)); + errdata.flush[1] = readl(DMOV_FLUSH1(id)); + errdata.flush[2] = readl(DMOV_FLUSH2(id)); + errdata.flush[3] = readl(DMOV_FLUSH3(id)); + errdata.flush[4] = readl(DMOV_FLUSH4(id)); + errdata.flush[5] = readl(DMOV_FLUSH5(id)); + PRINT_ERROR("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); - PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, flush0); + PRINT_ERROR("msm_datamover_irq_handler id %d, error, result %x, flush0 %x\n", id, ch_result, errdata.flush[0]); if (cmd) { list_del(&cmd->list); - cmd->complete_func(cmd, ch_result); + cmd->complete_func(cmd, ch_result, &errdata); } /* this does not seem to work, once we get an error */ /* the datamover will no longer accept commands */ @@ -193,8 +214,14 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) writel(cmd->cmdptr, DMOV_CMD_PTR(id)); } } while (ch_status & DMOV_STATUS_RSLT_VALID); + if (list_empty(&active_commands[id]) && list_empty(&ready_commands[id])) + channel_active &= ~(1U << id); PRINT_FLOW("msm_datamover_irq_handler id %d, status %x\n", id, ch_status); } + + if (!channel_active) + disable_irq(INT_ADM_AARM); + spin_unlock_irqrestore(&msm_dmov_lock, irq_flags); return IRQ_HANDLED; } @@ -202,12 +229,17 @@ static irqreturn_t msm_datamover_irq_handler(int irq, void *dev_id) static int __init msm_init_datamover(void) { int i; + int ret; for (i = 0; i < MSM_DMOV_CHANNEL_COUNT; i++) { INIT_LIST_HEAD(&ready_commands[i]); INIT_LIST_HEAD(&active_commands[i]); writel(DMOV_CONFIG_IRQ_EN | DMOV_CONFIG_FORCE_TOP_PTR_RSLT | DMOV_CONFIG_FORCE_FLUSH_RSLT, DMOV_CONFIG(i)); } - return request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); + ret = request_irq(INT_ADM_AARM, msm_datamover_irq_handler, 0, "msmdatamover", NULL); + if (ret) + return ret; + disable_irq(INT_ADM_AARM); + return 0; } arch_initcall(msm_init_datamover); diff --git a/arch/arm/mach-msm/include/mach/board.h b/arch/arm/mach-msm/include/mach/board.h index a7639493c095..264d62e519f3 100644 --- a/arch/arm/mach-msm/include/mach/board.h +++ b/arch/arm/mach-msm/include/mach/board.h @@ -33,5 +33,6 @@ void __init msm_add_devices(void); void __init msm_map_common_io(void); void __init msm_init_irq(void); void __init msm_init_gpio(void); +void __init msm_clock_init(void); #endif diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S index 528eef4b605c..1db3c97dbc49 100644 --- a/arch/arm/mach-msm/include/mach/debug-macro.S +++ b/arch/arm/mach-msm/include/mach/debug-macro.S @@ -22,18 +22,22 @@ mrc p15, 0, \rx, c1, c0 tst \rx, #1 ldreq \rx, =MSM_UART1_PHYS - ldrne \rx, =MSM_UART1_BASE + movne \rx, #0 .endm .macro senduart,rd,rx - str \rd, [\rx, #0x0C] + teq \rx, #0 + strne \rd, [\rx, #0x0C] .endm .macro waituart,rd,rx @ wait for TX_READY + teq \rx, #0 + bne 2f 1: ldr \rd, [\rx, #0x08] tst \rd, #0x04 beq 1b +2: .endm .macro busyuart,rd,rx diff --git a/arch/arm/mach-msm/include/mach/dma.h b/arch/arm/mach-msm/include/mach/dma.h index ad1c87f86d10..5ab5bdffab07 100644 --- a/arch/arm/mach-msm/include/mach/dma.h +++ b/arch/arm/mach-msm/include/mach/dma.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-msm/include/mach/dma.h +/* linux/include/asm-arm/arch-msm/dma.h * * Copyright (C) 2007 Google, Inc. * @@ -18,17 +18,21 @@ #include <linux/list.h> #include <mach/msm_iomap.h> +struct msm_dmov_errdata { + uint32_t flush[6]; +}; + struct msm_dmov_cmd { struct list_head list; unsigned int cmdptr; - void (*complete_func)(struct msm_dmov_cmd *cmd, unsigned int result); -/* void (*user_result_func)(struct msm_dmov_cmd *cmd); */ + void (*complete_func)(struct msm_dmov_cmd *cmd, + unsigned int result, + struct msm_dmov_errdata *err); }; void msm_dmov_enqueue_cmd(unsigned id, struct msm_dmov_cmd *cmd); -void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd); +void msm_dmov_stop_cmd(unsigned id, struct msm_dmov_cmd *cmd, int graceful); int msm_dmov_exec_cmd(unsigned id, unsigned int cmdptr); -/* int msm_dmov_exec_cmd_etc(unsigned id, unsigned int cmdptr, int timeout, int interruptible); */ @@ -122,6 +126,16 @@ typedef struct { unsigned _reserved; } dmov_sg; +/* Box mode */ +typedef struct { + uint32_t cmd; + uint32_t src_row_addr; + uint32_t dst_row_addr; + uint32_t src_dst_len; + uint32_t num_rows; + uint32_t row_offset; +} dmov_box; + /* bits for the cmd field of the above structures */ #define CMD_LC (1 << 31) /* last command */ diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index e221f58ceea3..2f7b4c8620d9 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -37,11 +37,17 @@ * */ -#define MSM_VIC_BASE 0xE0000000 +#ifdef __ASSEMBLY__ +#define IOMEM(x) x +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + +#define MSM_VIC_BASE IOMEM(0xE0000000) #define MSM_VIC_PHYS 0xC0000000 #define MSM_VIC_SIZE SZ_4K -#define MSM_CSR_BASE 0xE0001000 +#define MSM_CSR_BASE IOMEM(0xE0001000) #define MSM_CSR_PHYS 0xC0100000 #define MSM_CSR_SIZE SZ_4K @@ -49,56 +55,67 @@ #define MSM_GPT_BASE MSM_CSR_BASE #define MSM_GPT_SIZE SZ_4K -#define MSM_DMOV_BASE 0xE0002000 +#define MSM_DMOV_BASE IOMEM(0xE0002000) #define MSM_DMOV_PHYS 0xA9700000 #define MSM_DMOV_SIZE SZ_4K -#define MSM_UART1_BASE 0xE0003000 +#define MSM_GPIO1_BASE IOMEM(0xE0003000) +#define MSM_GPIO1_PHYS 0xA9200000 +#define MSM_GPIO1_SIZE SZ_4K + +#define MSM_GPIO2_BASE IOMEM(0xE0004000) +#define MSM_GPIO2_PHYS 0xA9300000 +#define MSM_GPIO2_SIZE SZ_4K + +#define MSM_CLK_CTL_BASE IOMEM(0xE0005000) +#define MSM_CLK_CTL_PHYS 0xA8600000 +#define MSM_CLK_CTL_SIZE SZ_4K + +#define MSM_SHARED_RAM_BASE IOMEM(0xE0100000) +#define MSM_SHARED_RAM_PHYS 0x01F00000 +#define MSM_SHARED_RAM_SIZE SZ_1M + #define MSM_UART1_PHYS 0xA9A00000 #define MSM_UART1_SIZE SZ_4K -#define MSM_UART2_BASE 0xE0004000 #define MSM_UART2_PHYS 0xA9B00000 #define MSM_UART2_SIZE SZ_4K -#define MSM_UART3_BASE 0xE0005000 #define MSM_UART3_PHYS 0xA9C00000 #define MSM_UART3_SIZE SZ_4K -#define MSM_I2C_BASE 0xE0006000 -#define MSM_I2C_PHYS 0xA9900000 -#define MSM_I2C_SIZE SZ_4K +#define MSM_SDC1_PHYS 0xA0400000 +#define MSM_SDC1_SIZE SZ_4K -#define MSM_GPIO1_BASE 0xE0007000 -#define MSM_GPIO1_PHYS 0xA9200000 -#define MSM_GPIO1_SIZE SZ_4K +#define MSM_SDC2_PHYS 0xA0500000 +#define MSM_SDC2_SIZE SZ_4K -#define MSM_GPIO2_BASE 0xE0008000 -#define MSM_GPIO2_PHYS 0xA9300000 -#define MSM_GPIO2_SIZE SZ_4K +#define MSM_SDC3_PHYS 0xA0600000 +#define MSM_SDC3_SIZE SZ_4K + +#define MSM_SDC4_PHYS 0xA0700000 +#define MSM_SDC4_SIZE SZ_4K + +#define MSM_I2C_PHYS 0xA9900000 +#define MSM_I2C_SIZE SZ_4K -#define MSM_HSUSB_BASE 0xE0009000 #define MSM_HSUSB_PHYS 0xA0800000 #define MSM_HSUSB_SIZE SZ_4K -#define MSM_CLK_CTL_BASE 0xE000A000 -#define MSM_CLK_CTL_PHYS 0xA8600000 -#define MSM_CLK_CTL_SIZE SZ_4K - -#define MSM_PMDH_BASE 0xE000B000 #define MSM_PMDH_PHYS 0xAA600000 #define MSM_PMDH_SIZE SZ_4K -#define MSM_EMDH_BASE 0xE000C000 #define MSM_EMDH_PHYS 0xAA700000 #define MSM_EMDH_SIZE SZ_4K -#define MSM_MDP_BASE 0xE0010000 #define MSM_MDP_PHYS 0xAA200000 #define MSM_MDP_SIZE 0x000F0000 -#define MSM_SHARED_RAM_BASE 0xE0100000 -#define MSM_SHARED_RAM_PHYS 0x01F00000 -#define MSM_SHARED_RAM_SIZE SZ_1M +#define MSM_MDC_PHYS 0xAA500000 +#define MSM_MDC_SIZE SZ_1M + +#define MSM_AD5_PHYS 0xAC000000 +#define MSM_AD5_SIZE (SZ_1M*13) + #endif diff --git a/arch/arm/mach-msm/include/mach/vreg.h b/arch/arm/mach-msm/include/mach/vreg.h new file mode 100644 index 000000000000..9f9e25cb718e --- /dev/null +++ b/arch/arm/mach-msm/include/mach/vreg.h @@ -0,0 +1,29 @@ +/* linux/include/asm-arm/arch-msm/vreg.h + * + * Copyright (C) 2008 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __ARCH_ARM_MACH_MSM_VREG_H +#define __ARCH_ARM_MACH_MSM_VREG_H + +struct vreg; + +struct vreg *vreg_get(struct device *dev, const char *id); +void vreg_put(struct vreg *vreg); + +int vreg_enable(struct vreg *vreg); +void vreg_disable(struct vreg *vreg); +int vreg_set_level(struct vreg *vreg, unsigned mv); + +#endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index 7999e4ba8e20..6e7692ff6f2c 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -28,7 +28,7 @@ #include <mach/board.h> #define MSM_DEVICE(name) { \ - .virtual = MSM_##name##_BASE, \ + .virtual = (unsigned long) MSM_##name##_BASE, \ .pfn = __phys_to_pfn(MSM_##name##_PHYS), \ .length = MSM_##name##_SIZE, \ .type = MT_DEVICE_NONSHARED, \ @@ -39,19 +39,11 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(CSR), MSM_DEVICE(GPT), MSM_DEVICE(DMOV), - MSM_DEVICE(UART1), - MSM_DEVICE(UART2), - MSM_DEVICE(UART3), - MSM_DEVICE(I2C), MSM_DEVICE(GPIO1), MSM_DEVICE(GPIO2), - MSM_DEVICE(HSUSB), MSM_DEVICE(CLK_CTL), - MSM_DEVICE(PMDH), - MSM_DEVICE(EMDH), - MSM_DEVICE(MDP), { - .virtual = MSM_SHARED_RAM_BASE, + .virtual = (unsigned long) MSM_SHARED_RAM_BASE, .pfn = __phys_to_pfn(MSM_SHARED_RAM_PHYS), .length = MSM_SHARED_RAM_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-msm/irq.c b/arch/arm/mach-msm/irq.c index 04b8d182ff8a..69ca0dd79bdf 100644 --- a/arch/arm/mach-msm/irq.c +++ b/arch/arm/mach-msm/irq.c @@ -66,20 +66,20 @@ static void msm_irq_ack(unsigned int irq) { - unsigned reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0); + void __iomem *reg = VIC_INT_CLEAR0 + ((irq & 32) ? 4 : 0); irq = 1 << (irq & 31); writel(irq, reg); } static void msm_irq_mask(unsigned int irq) { - unsigned reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0); + void __iomem *reg = VIC_INT_ENCLEAR0 + ((irq & 32) ? 4 : 0); writel(1 << (irq & 31), reg); } static void msm_irq_unmask(unsigned int irq) { - unsigned reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0); + void __iomem *reg = VIC_INT_ENSET0 + ((irq & 32) ? 4 : 0); writel(1 << (irq & 31), reg); } @@ -90,8 +90,8 @@ static int msm_irq_set_wake(unsigned int irq, unsigned int on) static int msm_irq_set_type(unsigned int irq, unsigned int flow_type) { - unsigned treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0); - unsigned preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0); + void __iomem *treg = VIC_INT_TYPE0 + ((irq & 32) ? 4 : 0); + void __iomem *preg = VIC_INT_POLARITY0 + ((irq & 32) ? 4 : 0); int b = 1 << (irq & 31); if (flow_type & (IRQF_TRIGGER_FALLING | IRQF_TRIGGER_LOW)) diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c new file mode 100644 index 000000000000..915ee704ed3c --- /dev/null +++ b/arch/arm/mach-msm/proc_comm.c @@ -0,0 +1,110 @@ +/* arch/arm/mach-msm/proc_comm.c + * + * Copyright (C) 2007-2008 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <mach/msm_iomap.h> +#include <mach/system.h> + +#include "proc_comm.h" + +#define MSM_A2M_INT(n) (MSM_CSR_BASE + 0x400 + (n) * 4) + +static inline void notify_other_proc_comm(void) +{ + writel(1, MSM_A2M_INT(6)); +} + +#define APP_COMMAND 0x00 +#define APP_STATUS 0x04 +#define APP_DATA1 0x08 +#define APP_DATA2 0x0C + +#define MDM_COMMAND 0x10 +#define MDM_STATUS 0x14 +#define MDM_DATA1 0x18 +#define MDM_DATA2 0x1C + +static DEFINE_SPINLOCK(proc_comm_lock); + +/* The higher level SMD support will install this to + * provide a way to check for and handle modem restart. + */ +int (*msm_check_for_modem_crash)(void); + +/* Poll for a state change, checking for possible + * modem crashes along the way (so we don't wait + * forever while the ARM9 is blowing up). + * + * Return an error in the event of a modem crash and + * restart so the msm_proc_comm() routine can restart + * the operation from the beginning. + */ +static int proc_comm_wait_for(void __iomem *addr, unsigned value) +{ + for (;;) { + if (readl(addr) == value) + return 0; + + if (msm_check_for_modem_crash) + if (msm_check_for_modem_crash()) + return -EAGAIN; + } +} + +int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) +{ + void __iomem *base = MSM_SHARED_RAM_BASE; + unsigned long flags; + int ret; + + spin_lock_irqsave(&proc_comm_lock, flags); + + for (;;) { + if (proc_comm_wait_for(base + MDM_STATUS, PCOM_READY)) + continue; + + writel(cmd, base + APP_COMMAND); + writel(data1 ? *data1 : 0, base + APP_DATA1); + writel(data2 ? *data2 : 0, base + APP_DATA2); + + notify_other_proc_comm(); + + if (proc_comm_wait_for(base + APP_COMMAND, PCOM_CMD_DONE)) + continue; + + if (readl(base + APP_STATUS) != PCOM_CMD_FAIL) { + if (data1) + *data1 = readl(base + APP_DATA1); + if (data2) + *data2 = readl(base + APP_DATA2); + ret = 0; + } else { + ret = -EIO; + } + break; + } + + writel(PCOM_CMD_IDLE, base + APP_COMMAND); + + spin_unlock_irqrestore(&proc_comm_lock, flags); + + return ret; +} + + diff --git a/arch/arm/mach-msm/proc_comm.h b/arch/arm/mach-msm/proc_comm.h new file mode 100644 index 000000000000..834760f25692 --- /dev/null +++ b/arch/arm/mach-msm/proc_comm.h @@ -0,0 +1,165 @@ +/* arch/arm/mach-msm/proc_comm.h + * + * Copyright (c) 2007 QUALCOMM Incorporated + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef _ARCH_ARM_MACH_MSM_PROC_COMM_H_ +#define _ARCH_ARM_MACH_MSM_PROC_COMM_H_ + +enum { + PCOM_CMD_IDLE = 0x0, + PCOM_CMD_DONE, + PCOM_RESET_APPS, + PCOM_RESET_CHIP, + PCOM_CONFIG_NAND_MPU, + PCOM_CONFIG_USB_CLKS, + PCOM_GET_POWER_ON_STATUS, + PCOM_GET_WAKE_UP_STATUS, + PCOM_GET_BATT_LEVEL, + PCOM_CHG_IS_CHARGING, + PCOM_POWER_DOWN, + PCOM_USB_PIN_CONFIG, + PCOM_USB_PIN_SEL, + PCOM_SET_RTC_ALARM, + PCOM_NV_READ, + PCOM_NV_WRITE, + PCOM_GET_UUID_HIGH, + PCOM_GET_UUID_LOW, + PCOM_GET_HW_ENTROPY, + PCOM_RPC_GPIO_TLMM_CONFIG_REMOTE, + PCOM_CLKCTL_RPC_ENABLE, + PCOM_CLKCTL_RPC_DISABLE, + PCOM_CLKCTL_RPC_RESET, + PCOM_CLKCTL_RPC_SET_FLAGS, + PCOM_CLKCTL_RPC_SET_RATE, + PCOM_CLKCTL_RPC_MIN_RATE, + PCOM_CLKCTL_RPC_MAX_RATE, + PCOM_CLKCTL_RPC_RATE, + PCOM_CLKCTL_RPC_PLL_REQUEST, + PCOM_CLKCTL_RPC_ENABLED, + PCOM_VREG_SWITCH, + PCOM_VREG_SET_LEVEL, + PCOM_GPIO_TLMM_CONFIG_GROUP, + PCOM_GPIO_TLMM_UNCONFIG_GROUP, + PCOM_NV_WRITE_BYTES_4_7, + PCOM_CONFIG_DISP, + PCOM_GET_FTM_BOOT_COUNT, + PCOM_RPC_GPIO_TLMM_CONFIG_EX, + PCOM_PM_MPP_CONFIG, + PCOM_GPIO_IN, + PCOM_GPIO_OUT, + PCOM_RESET_MODEM, + PCOM_RESET_CHIP_IMM, + PCOM_PM_VID_EN, + PCOM_VREG_PULLDOWN, + PCOM_NUM_CMDS, +}; + +enum { + PCOM_INVALID_STATUS = 0x0, + PCOM_READY, + PCOM_CMD_RUNNING, + PCOM_CMD_SUCCESS, + PCOM_CMD_FAIL, +}; + +/* List of VREGs that support the Pull Down Resistor setting. */ +enum { + PM_VREG_PDOWN_MSMA_ID, + PM_VREG_PDOWN_MSMP_ID, + PM_VREG_PDOWN_MSME1_ID, /* Not supported in Panoramix */ + PM_VREG_PDOWN_MSMC1_ID, /* Not supported in PM6620 */ + PM_VREG_PDOWN_MSMC2_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP3_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_MSME2_ID, /* Supported in PM7500 and Panoramix only */ + PM_VREG_PDOWN_GP4_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP1_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_TCXO_ID, + PM_VREG_PDOWN_PA_ID, + PM_VREG_PDOWN_RFTX_ID, + PM_VREG_PDOWN_RFRX1_ID, + PM_VREG_PDOWN_RFRX2_ID, + PM_VREG_PDOWN_SYNT_ID, + PM_VREG_PDOWN_WLAN_ID, + PM_VREG_PDOWN_USB_ID, + PM_VREG_PDOWN_MMC_ID, + PM_VREG_PDOWN_RUIM_ID, + PM_VREG_PDOWN_MSMC0_ID, /* Supported in PM6610 only */ + PM_VREG_PDOWN_GP2_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP5_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_GP6_ID, /* Supported in PM7500 only */ + PM_VREG_PDOWN_RF_ID, + PM_VREG_PDOWN_RF_VCO_ID, + PM_VREG_PDOWN_MPLL_ID, + PM_VREG_PDOWN_S2_ID, + PM_VREG_PDOWN_S3_ID, + PM_VREG_PDOWN_RFUBM_ID, + + /* new for HAN */ + PM_VREG_PDOWN_RF1_ID, + PM_VREG_PDOWN_RF2_ID, + PM_VREG_PDOWN_RFA_ID, + PM_VREG_PDOWN_CDC2_ID, + PM_VREG_PDOWN_RFTX2_ID, + PM_VREG_PDOWN_USIM_ID, + PM_VREG_PDOWN_USB2P6_ID, + PM_VREG_PDOWN_USB3P3_ID, + PM_VREG_PDOWN_INVALID_ID, + + /* backward compatible enums only */ + PM_VREG_PDOWN_CAM_ID = PM_VREG_PDOWN_GP1_ID, + PM_VREG_PDOWN_MDDI_ID = PM_VREG_PDOWN_GP2_ID, + PM_VREG_PDOWN_RUIM2_ID = PM_VREG_PDOWN_GP3_ID, + PM_VREG_PDOWN_AUX_ID = PM_VREG_PDOWN_GP4_ID, + PM_VREG_PDOWN_AUX2_ID = PM_VREG_PDOWN_GP5_ID, + PM_VREG_PDOWN_BT_ID = PM_VREG_PDOWN_GP6_ID, + + PM_VREG_PDOWN_MSME_ID = PM_VREG_PDOWN_MSME1_ID, + PM_VREG_PDOWN_MSMC_ID = PM_VREG_PDOWN_MSMC1_ID, + PM_VREG_PDOWN_RFA1_ID = PM_VREG_PDOWN_RFRX2_ID, + PM_VREG_PDOWN_RFA2_ID = PM_VREG_PDOWN_RFTX2_ID, + PM_VREG_PDOWN_XO_ID = PM_VREG_PDOWN_TCXO_ID +}; + +/* gpio info for PCOM_RPC_GPIO_TLMM_CONFIG_EX */ + +#define GPIO_ENABLE 0 +#define GPIO_DISABLE 1 + +#define GPIO_INPUT 0 +#define GPIO_OUTPUT 1 + +#define GPIO_NO_PULL 0 +#define GPIO_PULL_DOWN 1 +#define GPIO_KEEPER 2 +#define GPIO_PULL_UP 3 + +#define GPIO_2MA 0 +#define GPIO_4MA 1 +#define GPIO_6MA 2 +#define GPIO_8MA 3 +#define GPIO_10MA 4 +#define GPIO_12MA 5 +#define GPIO_14MA 6 +#define GPIO_16MA 7 + +#define PCOM_GPIO_CFG(gpio, func, dir, pull, drvstr) \ + ((((gpio) & 0x3FF) << 4) | \ + ((func) & 0xf) | \ + (((dir) & 0x1) << 14) | \ + (((pull) & 0x3) << 15) | \ + (((drvstr) & 0xF) << 17)) + +int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2); + +#endif diff --git a/arch/arm/mach-msm/timer.c b/arch/arm/mach-msm/timer.c index 2bffe9b7e9fe..345a14cb73c3 100644 --- a/arch/arm/mach-msm/timer.c +++ b/arch/arm/mach-msm/timer.c @@ -45,7 +45,7 @@ struct msm_clock { struct clock_event_device clockevent; struct clocksource clocksource; struct irqaction irq; - uint32_t regbase; + void __iomem *regbase; uint32_t freq; uint32_t shift; }; diff --git a/arch/arm/mach-msm/vreg.c b/arch/arm/mach-msm/vreg.c new file mode 100644 index 000000000000..fcb0b9f25684 --- /dev/null +++ b/arch/arm/mach-msm/vreg.c @@ -0,0 +1,143 @@ +/* arch/arm/mach-msm/vreg.c + * + * Copyright (C) 2008 Google, Inc. + * Author: Brian Swetland <swetland@google.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/init.h> +#include <linux/debugfs.h> +#include <mach/vreg.h> + +#include "proc_comm.h" + +struct vreg { + const char *name; + unsigned id; +}; + +#define VREG(_name, _id) { .name = _name, .id = _id, } + +static struct vreg vregs[] = { + VREG("msma", 0), + VREG("msmp", 1), + VREG("msme1", 2), + VREG("msmc1", 3), + VREG("msmc2", 4), + VREG("gp3", 5), + VREG("msme2", 6), + VREG("gp4", 7), + VREG("gp1", 8), + VREG("tcxo", 9), + VREG("pa", 10), + VREG("rftx", 11), + VREG("rfrx1", 12), + VREG("rfrx2", 13), + VREG("synt", 14), + VREG("wlan", 15), + VREG("usb", 16), + VREG("boost", 17), + VREG("mmc", 18), + VREG("ruim", 19), + VREG("msmc0", 20), + VREG("gp2", 21), + VREG("gp5", 22), + VREG("gp6", 23), + VREG("rf", 24), + VREG("rf_vco", 26), + VREG("mpll", 27), + VREG("s2", 28), + VREG("s3", 29), + VREG("rfubm", 30), + VREG("ncp", 31), +}; + +struct vreg *vreg_get(struct device *dev, const char *id) +{ + int n; + for (n = 0; n < ARRAY_SIZE(vregs); n++) { + if (!strcmp(vregs[n].name, id)) + return vregs + n; + } + return 0; +} + +void vreg_put(struct vreg *vreg) +{ +} + +int vreg_enable(struct vreg *vreg) +{ + unsigned id = vreg->id; + unsigned enable = 1; + return msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); +} + +void vreg_disable(struct vreg *vreg) +{ + unsigned id = vreg->id; + unsigned enable = 0; + msm_proc_comm(PCOM_VREG_SWITCH, &id, &enable); +} + +int vreg_set_level(struct vreg *vreg, unsigned mv) +{ + unsigned id = vreg->id; + return msm_proc_comm(PCOM_VREG_SET_LEVEL, &id, &mv); +} + +#if defined(CONFIG_DEBUG_FS) + +static int vreg_debug_set(void *data, u64 val) +{ + struct vreg *vreg = data; + switch (val) { + case 0: + vreg_disable(vreg); + break; + case 1: + vreg_enable(vreg); + break; + default: + vreg_set_level(vreg, val); + break; + } + return 0; +} + +static int vreg_debug_get(void *data, u64 *val) +{ + return -ENOSYS; +} + +DEFINE_SIMPLE_ATTRIBUTE(vreg_fops, vreg_debug_get, vreg_debug_set, "%llu\n"); + +static int __init vreg_debug_init(void) +{ + struct dentry *dent; + int n; + + dent = debugfs_create_dir("vreg", 0); + if (IS_ERR(dent)) + return 0; + + for (n = 0; n < ARRAY_SIZE(vregs); n++) + (void) debugfs_create_file(vregs[n].name, 0644, + dent, vregs + n, &vreg_fops); + + return 0; +} + +device_initcall(vreg_debug_init); +#endif diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f781873431f3..a062235e83a8 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -71,6 +71,14 @@ config PXA_SHARPSL SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. +config CORGI_SSP_DEPRECATED + bool + select PXA_SSP + help + This option will include corgi_ssp.c and corgi_lcd.c + that corgi_ts.c and other legacy drivers (corgi_bl.c + and sharpsl_pm.c) may depend on. + config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index d31c9979cfa3..d64c68b232e3 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_MACH_TRIZEPS4) += trizeps4.o obj-$(CONFIG_MACH_COLIBRI) += colibri.o obj-$(CONFIG_PXA_SHARP_C7xx) += corgi.o sharpsl_pm.o corgi_pm.o obj-$(CONFIG_PXA_SHARP_Cxx00) += spitz.o sharpsl_pm.o spitz_pm.o +obj-$(CONFIG_CORGI_SSP_DEPRECATED) += corgi_ssp.o corgi_lcd.o obj-$(CONFIG_MACH_POODLE) += poodle.o obj-$(CONFIG_MACH_PCM027) += pcm027.o obj-$(CONFIG_MACH_PCM990_BASEBOARD) += pcm990-baseboard.o diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c new file mode 100644 index 000000000000..411607bc1fc2 --- /dev/null +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -0,0 +1,289 @@ +/* + * linux/arch/arm/mach-pxa/corgi_lcd.c + * + * Corgi/Spitz LCD Specific Code + * + * Copyright (C) 2005 Richard Purdie + * + * Connectivity: + * Corgi - LCD to ATI Imageon w100 (Wallaby) + * Spitz - LCD to PXA Framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/string.h> +#include <mach/corgi.h> +#include <mach/hardware.h> +#include <mach/pxa-regs.h> +#include <mach/sharpsl.h> +#include <mach/spitz.h> +#include <asm/hardware/scoop.h> +#include <asm/mach/sharpsl_param.h> +#include "generic.h" + +/* Register Addresses */ +#define RESCTL_ADRS 0x00 +#define PHACTRL_ADRS 0x01 +#define DUTYCTRL_ADRS 0x02 +#define POWERREG0_ADRS 0x03 +#define POWERREG1_ADRS 0x04 +#define GPOR3_ADRS 0x05 +#define PICTRL_ADRS 0x06 +#define POLCTRL_ADRS 0x07 + +/* Register Bit Definitions */ +#define RESCTL_QVGA 0x01 +#define RESCTL_VGA 0x00 + +#define POWER1_VW_ON 0x01 /* VW Supply FET ON */ +#define POWER1_GVSS_ON 0x02 /* GVSS(-8V) Power Supply ON */ +#define POWER1_VDD_ON 0x04 /* VDD(8V),SVSS(-4V) Power Supply ON */ + +#define POWER1_VW_OFF 0x00 /* VW Supply FET OFF */ +#define POWER1_GVSS_OFF 0x00 /* GVSS(-8V) Power Supply OFF */ +#define POWER1_VDD_OFF 0x00 /* VDD(8V),SVSS(-4V) Power Supply OFF */ + +#define POWER0_COM_DCLK 0x01 /* COM Voltage DC Bias DAC Serial Data Clock */ +#define POWER0_COM_DOUT 0x02 /* COM Voltage DC Bias DAC Serial Data Out */ +#define POWER0_DAC_ON 0x04 /* DAC Power Supply ON */ +#define POWER0_COM_ON 0x08 /* COM Power Supply ON */ +#define POWER0_VCC5_ON 0x10 /* VCC5 Power Supply ON */ + +#define POWER0_DAC_OFF 0x00 /* DAC Power Supply OFF */ +#define POWER0_COM_OFF 0x00 /* COM Power Supply OFF */ +#define POWER0_VCC5_OFF 0x00 /* VCC5 Power Supply OFF */ + +#define PICTRL_INIT_STATE 0x01 +#define PICTRL_INIOFF 0x02 +#define PICTRL_POWER_DOWN 0x04 +#define PICTRL_COM_SIGNAL_OFF 0x08 +#define PICTRL_DAC_SIGNAL_OFF 0x10 + +#define POLCTRL_SYNC_POL_FALL 0x01 +#define POLCTRL_EN_POL_FALL 0x02 +#define POLCTRL_DATA_POL_FALL 0x04 +#define POLCTRL_SYNC_ACT_H 0x08 +#define POLCTRL_EN_ACT_L 0x10 + +#define POLCTRL_SYNC_POL_RISE 0x00 +#define POLCTRL_EN_POL_RISE 0x00 +#define POLCTRL_DATA_POL_RISE 0x00 +#define POLCTRL_SYNC_ACT_L 0x00 +#define POLCTRL_EN_ACT_H 0x00 + +#define PHACTRL_PHASE_MANUAL 0x01 +#define DEFAULT_PHAD_QVGA (9) +#define DEFAULT_COMADJ (125) + +/* + * This is only a psuedo I2C interface. We can't use the standard kernel + * routines as the interface is write only. We just assume the data is acked... + */ +static void lcdtg_ssp_i2c_send(u8 data) +{ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, data); + udelay(10); +} + +static void lcdtg_i2c_send_bit(u8 data) +{ + lcdtg_ssp_i2c_send(data); + lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(data); +} + +static void lcdtg_i2c_send_start(u8 base) +{ + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(base); +} + +static void lcdtg_i2c_send_stop(u8 base) +{ + lcdtg_ssp_i2c_send(base); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK); + lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT); +} + +static void lcdtg_i2c_send_byte(u8 base, u8 data) +{ + int i; + for (i = 0; i < 8; i++) { + if (data & 0x80) + lcdtg_i2c_send_bit(base | POWER0_COM_DOUT); + else + lcdtg_i2c_send_bit(base); + data <<= 1; + } +} + +static void lcdtg_i2c_wait_ack(u8 base) +{ + lcdtg_i2c_send_bit(base); +} + +static void lcdtg_set_common_voltage(u8 base_data, u8 data) +{ + /* Set Common Voltage to M62332FP via I2C */ + lcdtg_i2c_send_start(base_data); + lcdtg_i2c_send_byte(base_data, 0x9c); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_byte(base_data, 0x00); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_byte(base_data, data); + lcdtg_i2c_wait_ack(base_data); + lcdtg_i2c_send_stop(base_data); +} + +/* Set Phase Adjust */ +static void lcdtg_set_phadadj(int mode) +{ + int adj; + switch(mode) { + case 480: + case 640: + /* Setting for VGA */ + adj = sharpsl_param.phadadj; + if (adj < 0) { + adj = PHACTRL_PHASE_MANUAL; + } else { + adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL; + } + break; + case 240: + case 320: + default: + /* Setting for QVGA */ + adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL; + break; + } + + corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj); +} + +static int lcd_inited; + +void corgi_lcdtg_hw_init(int mode) +{ + if (!lcd_inited) { + int comadj; + + /* Initialize Internal Logic & Port */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE + | PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF); + + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF + | POWER0_COM_OFF | POWER0_VCC5_OFF); + + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); + + /* VDD(+8V), SVSS(-4V) ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); + mdelay(3); + + /* DAC ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON + | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* INIB = H, INI = L */ + /* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF); + + /* Set Common Voltage */ + comadj = sharpsl_param.comadj; + if (comadj < 0) + comadj = DEFAULT_COMADJ; + lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj); + + /* VCC5 ON, DAC ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON | + POWER0_COM_OFF | POWER0_VCC5_ON); + + /* GVSS(-8V) ON, VDD ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); + mdelay(2); + + /* COM SIGNAL ON (PICTL[3] = L) */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE); + + /* COM ON, DAC ON, VCC5_ON */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON + | POWER0_COM_ON | POWER0_VCC5_ON); + + /* VW ON, GVSS ON, VDD ON */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON); + + /* Signals output enable */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, 0); + + /* Set Phase Adjust */ + lcdtg_set_phadadj(mode); + + /* Initialize for Input Signals from ATI */ + corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE + | POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H); + udelay(1000); + + lcd_inited=1; + } else { + lcdtg_set_phadadj(mode); + } + + switch(mode) { + case 480: + case 640: + /* Set Lcd Resolution (VGA) */ + corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA); + break; + case 240: + case 320: + default: + /* Set Lcd Resolution (QVGA) */ + corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA); + break; + } +} + +void corgi_lcdtg_suspend(void) +{ + /* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */ + mdelay(34); + + /* (1)VW OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON); + + /* (2)COM OFF */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF); + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON); + + /* (3)Set Common Voltage Bias 0V */ + lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0); + + /* (4)GVSS OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON); + + /* (5)VCC5 OFF */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* (6)Set PDWN, INIOFF, DACOFF */ + corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF | + PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF); + + /* (7)DAC OFF */ + corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF); + + /* (8)VDD OFF */ + corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF); + + lcd_inited = 0; +} + diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c new file mode 100644 index 000000000000..8e2f2215c4ba --- /dev/null +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -0,0 +1,276 @@ +/* + * SSP control code for Sharp Corgi devices + * + * Copyright (c) 2004-2005 Richard Purdie + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/slab.h> +#include <linux/delay.h> +#include <linux/platform_device.h> +#include <mach/hardware.h> +#include <asm/mach-types.h> + +#include <mach/ssp.h> +#include <mach/pxa-regs.h> +#include <mach/pxa2xx-gpio.h> +#include <mach/regs-ssp.h> +#include "sharpsl.h" + +static DEFINE_SPINLOCK(corgi_ssp_lock); +static struct ssp_dev corgi_ssp_dev; +static struct ssp_state corgi_ssp_state; +static struct corgissp_machinfo *ssp_machinfo; + +/* + * There are three devices connected to the SSP interface: + * 1. A touchscreen controller (TI ADS7846 compatible) + * 2. An LCD controller (with some Backlight functionality) + * 3. A battery monitoring IC (Maxim MAX1111) + * + * Each device uses a different speed/mode of communication. + * + * The touchscreen is very sensitive and the most frequently used + * so the port is left configured for this. + * + * Devices are selected using Chip Selects on GPIOs. + */ + +/* + * ADS7846 Routines + */ +unsigned long corgi_ssp_ads7846_putget(ulong data) +{ + unsigned long flag; + u32 ret = 0; + + spin_lock_irqsave(&corgi_ssp_lock, flag); + if (ssp_machinfo->cs_ads7846 >= 0) + GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); + + ssp_write_word(&corgi_ssp_dev,data); + ssp_read_word(&corgi_ssp_dev, &ret); + + if (ssp_machinfo->cs_ads7846 >= 0) + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); + spin_unlock_irqrestore(&corgi_ssp_lock, flag); + + return ret; +} + +/* + * NOTE: These functions should always be called in interrupt context + * and use the _lock and _unlock functions. They are very time sensitive. + */ +void corgi_ssp_ads7846_lock(void) +{ + spin_lock(&corgi_ssp_lock); + if (ssp_machinfo->cs_ads7846 >= 0) + GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); +} + +void corgi_ssp_ads7846_unlock(void) +{ + if (ssp_machinfo->cs_ads7846 >= 0) + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); + spin_unlock(&corgi_ssp_lock); +} + +void corgi_ssp_ads7846_put(ulong data) +{ + ssp_write_word(&corgi_ssp_dev,data); +} + +unsigned long corgi_ssp_ads7846_get(void) +{ + u32 ret = 0; + ssp_read_word(&corgi_ssp_dev, &ret); + return ret; +} + +EXPORT_SYMBOL(corgi_ssp_ads7846_putget); +EXPORT_SYMBOL(corgi_ssp_ads7846_lock); +EXPORT_SYMBOL(corgi_ssp_ads7846_unlock); +EXPORT_SYMBOL(corgi_ssp_ads7846_put); +EXPORT_SYMBOL(corgi_ssp_ads7846_get); + + +/* + * LCD/Backlight Routines + */ +unsigned long corgi_ssp_dac_put(ulong data) +{ + unsigned long flag, sscr1 = SSCR1_SPH; + u32 tmp; + + spin_lock_irqsave(&corgi_ssp_lock, flag); + + if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi()) + sscr1 = 0; + + ssp_disable(&corgi_ssp_dev); + ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon)); + ssp_enable(&corgi_ssp_dev); + + if (ssp_machinfo->cs_lcdcon >= 0) + GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); + ssp_write_word(&corgi_ssp_dev,data); + /* Read null data back from device to prevent SSP overflow */ + ssp_read_word(&corgi_ssp_dev, &tmp); + if (ssp_machinfo->cs_lcdcon >= 0) + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); + + ssp_disable(&corgi_ssp_dev); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); + ssp_enable(&corgi_ssp_dev); + + spin_unlock_irqrestore(&corgi_ssp_lock, flag); + + return 0; +} + +void corgi_ssp_lcdtg_send(u8 adrs, u8 data) +{ + corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f)); +} + +void corgi_ssp_blduty_set(int duty) +{ + corgi_ssp_lcdtg_send(0x02,duty); +} + +EXPORT_SYMBOL(corgi_ssp_lcdtg_send); +EXPORT_SYMBOL(corgi_ssp_blduty_set); + +/* + * Max1111 Routines + */ +int corgi_ssp_max1111_get(ulong data) +{ + unsigned long flag; + long voltage = 0, voltage1 = 0, voltage2 = 0; + + spin_lock_irqsave(&corgi_ssp_lock, flag); + if (ssp_machinfo->cs_max1111 >= 0) + GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); + ssp_disable(&corgi_ssp_dev); + ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111)); + ssp_enable(&corgi_ssp_dev); + + udelay(1); + + /* TB1/RB1 */ + ssp_write_word(&corgi_ssp_dev,data); + ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */ + + /* TB12/RB2 */ + ssp_write_word(&corgi_ssp_dev,0); + ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); + + /* TB13/RB3*/ + ssp_write_word(&corgi_ssp_dev,0); + ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2); + + ssp_disable(&corgi_ssp_dev); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); + ssp_enable(&corgi_ssp_dev); + if (ssp_machinfo->cs_max1111 >= 0) + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); + spin_unlock_irqrestore(&corgi_ssp_lock, flag); + + if (voltage1 & 0xc0 || voltage2 & 0x3f) + voltage = -1; + else + voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03); + + return voltage; +} + +EXPORT_SYMBOL(corgi_ssp_max1111_get); + +/* + * Support Routines + */ + +void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo) +{ + ssp_machinfo = machinfo; +} + +static int __init corgi_ssp_probe(struct platform_device *dev) +{ + int ret; + + /* Chip Select - Disable All */ + if (ssp_machinfo->cs_lcdcon >= 0) + pxa_gpio_mode(ssp_machinfo->cs_lcdcon | GPIO_OUT | GPIO_DFLT_HIGH); + if (ssp_machinfo->cs_max1111 >= 0) + pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH); + if (ssp_machinfo->cs_ads7846 >= 0) + pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH); + + ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0); + + if (ret) + printk(KERN_ERR "Unable to register SSP handler!\n"); + else { + ssp_disable(&corgi_ssp_dev); + ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846)); + ssp_enable(&corgi_ssp_dev); + } + + return ret; +} + +static int corgi_ssp_remove(struct platform_device *dev) +{ + ssp_exit(&corgi_ssp_dev); + return 0; +} + +static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state) +{ + ssp_flush(&corgi_ssp_dev); + ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state); + + return 0; +} + +static int corgi_ssp_resume(struct platform_device *dev) +{ + if (ssp_machinfo->cs_lcdcon >= 0) + GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon); /* High - Disable LCD Control/Timing Gen */ + if (ssp_machinfo->cs_max1111 >= 0) + GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/ + if (ssp_machinfo->cs_ads7846 >= 0) + GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/ + ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state); + ssp_enable(&corgi_ssp_dev); + + return 0; +} + +static struct platform_driver corgissp_driver = { + .probe = corgi_ssp_probe, + .remove = corgi_ssp_remove, + .suspend = corgi_ssp_suspend, + .resume = corgi_ssp_resume, + .driver = { + .name = "corgi-ssp", + }, +}; + +int __init corgi_ssp_init(void) +{ + return platform_driver_register(&corgissp_driver); +} + +arch_initcall(corgi_ssp_init); diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 585970ef08ce..7239281788de 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -113,6 +113,7 @@ * Shared data structures */ extern struct platform_device corgiscoop_device; +extern struct platform_device corgissp_device; #endif /* __ASM_ARCH_CORGI_H */ diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index e8488dfb7e91..fa1998caa78e 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -187,4 +187,5 @@ */ extern struct platform_device spitzscoop_device; extern struct platform_device spitzscoop2_device; +extern struct platform_device spitzssp_device; extern struct sharpsl_charger_machinfo spitz_pm_machinfo; diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h index 8bce6d8615b9..4df2d38507dc 100644 --- a/arch/arm/mach-pxa/include/mach/tosa.h +++ b/arch/arm/mach-pxa/include/mach/tosa.h @@ -193,4 +193,7 @@ #define TOSA_KEY_MAIL KEY_MAIL #endif +struct spi_device; +extern int tosa_bl_enable(struct spi_device *spi, int enable); + #endif /* _ASM_ARCH_TOSA_H_ */ diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 15c2f1a8623b..f0845c1b001c 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -116,20 +116,33 @@ struct battery_thresh spitz_battery_levels_noac[] = { { 0, 0}, }; +/* MAX1111 Commands */ +#define MAXCTRL_PD0 1u << 0 +#define MAXCTRL_PD1 1u << 1 +#define MAXCTRL_SGL 1u << 2 +#define MAXCTRL_UNI 1u << 3 +#define MAXCTRL_SEL_SH 4 +#define MAXCTRL_STR 1u << 7 + /* * Read MAX1111 ADC */ -extern int max1111_read_channel(int); - int sharpsl_pm_pxa_read_max1111(int channel) { if (machine_is_tosa()) // Ugly, better move this function into another module return 0; +#ifdef CONFIG_CORGI_SSP_DEPRECATED + return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1 + | MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR); +#else + extern int max1111_read_channel(int); + /* max1111 accepts channels from 0-3, however, * it is encoded from 0-7 here in the code. */ return max1111_read_channel(channel >> 1); +#endif } void sharpsl_pm_pxa_init(void) diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index a6c4694359ca..224897a67d15 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -31,6 +31,7 @@ #include <linux/gpio.h> #include <linux/pda_power.h> #include <linux/rfkill.h> +#include <linux/spi/spi.h> #include <asm/setup.h> #include <asm/mach-types.h> @@ -42,6 +43,7 @@ #include <mach/mmc.h> #include <mach/udc.h> #include <mach/tosa_bt.h> +#include <mach/pxa2xx_spi.h> #include <asm/mach/arch.h> #include <mach/tosa.h> @@ -612,7 +614,7 @@ static int tosa_tc6393xb_enable(struct platform_device *dev) rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend"); if (rc) goto err_req_suspend; - rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v"); + rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "tc6393xb l3v"); if (rc) goto err_req_l3v; rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0); @@ -772,6 +774,20 @@ static struct platform_device tosa_bt_device = { .dev.platform_data = &tosa_bt_data, }; +static struct pxa2xx_spi_master pxa_ssp_master_info = { + .num_chipselect = 1, +}; + +static struct spi_board_info spi_board_info[] __initdata = { + { + .modalias = "tosa-lcd", + // .platform_data + .max_speed_hz = 28750, + .bus_num = 2, + .chip_select = 0, + .mode = SPI_MODE_0, + }, +}; static struct platform_device *devices[] __initdata = { &tosascoop_device, @@ -826,6 +842,9 @@ static void __init tosa_init(void) pxa_set_i2c_info(NULL); platform_scoop_config = &tosa_pcmcia_config; + pxa2xx_set_spi_info(2, &pxa_ssp_master_info); + spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); + clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index d1193884d76d..ab5f7a21350b 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -400,9 +400,9 @@ config CPU_FEROCEON_OLD_ID # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM7X00A || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 default y if ARCH_MX3 - default y if ARCH_MSM7X00A + default y if ARCH_MSM select CPU_32v6 select CPU_ABRT_EV6 select CPU_PABRT_NOIFAR diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 34e424041927..07f82db70945 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -180,8 +180,8 @@ __v7_setup: mov r10, #0x1f @ domains 0, 1 = manager mcr p15, 0, r10, c3, c0, 0 @ load domain access register #endif - ldr r5, =0x40e040e0 - ldr r6, =0xff0aa1a8 + ldr r5, =0xff0aa1a8 + ldr r6, =0x40e040e0 mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR adr r5, v7_crval diff --git a/arch/x86/boot/video-bios.c b/arch/x86/boot/video-bios.c index 49f26aaaebc8..3fa979c9c363 100644 --- a/arch/x86/boot/video-bios.c +++ b/arch/x86/boot/video-bios.c @@ -17,7 +17,7 @@ #include "boot.h" #include "video.h" -__videocard video_bios; +static __videocard video_bios; /* Set a conventional BIOS mode */ static int set_bios_mode(u8 mode); @@ -119,7 +119,7 @@ static int bios_probe(void) return nmodes; } -__videocard video_bios = +static __videocard video_bios = { .card_name = "BIOS", .probe = bios_probe, diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index 99b3079dc6ab..75115849af33 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -20,7 +20,7 @@ static struct vesa_general_info vginfo; static struct vesa_mode_info vminfo; -__videocard video_vesa; +static __videocard video_vesa; #ifndef _WAKEUP static void vesa_store_mode_params_graphics(void); @@ -293,7 +293,7 @@ void vesa_store_edid(void) #endif /* not _WAKEUP */ -__videocard video_vesa = +static __videocard video_vesa = { .card_name = "VESA", .probe = vesa_probe, diff --git a/arch/x86/include/asm/syscall.h b/arch/x86/include/asm/syscall.h index 1d88f6957d39..d82f39bb7905 100644 --- a/arch/x86/include/asm/syscall.h +++ b/arch/x86/include/asm/syscall.h @@ -93,26 +93,26 @@ static inline void syscall_get_arguments(struct task_struct *task, { # ifdef CONFIG_IA32_EMULATION if (task_thread_info(task)->status & TS_COMPAT) - switch (i + n) { - case 6: + switch (i) { + case 0: if (!n--) break; - *args++ = regs->bp; - case 5: + *args++ = regs->bx; + case 1: if (!n--) break; - *args++ = regs->di; - case 4: + *args++ = regs->cx; + case 2: if (!n--) break; - *args++ = regs->si; + *args++ = regs->dx; case 3: if (!n--) break; - *args++ = regs->dx; - case 2: + *args++ = regs->si; + case 4: if (!n--) break; - *args++ = regs->cx; - case 1: + *args++ = regs->di; + case 5: if (!n--) break; - *args++ = regs->bx; - case 0: + *args++ = regs->bp; + case 6: if (!n--) break; default: BUG(); @@ -120,26 +120,26 @@ static inline void syscall_get_arguments(struct task_struct *task, } else # endif - switch (i + n) { - case 6: + switch (i) { + case 0: if (!n--) break; - *args++ = regs->r9; - case 5: + *args++ = regs->di; + case 1: if (!n--) break; - *args++ = regs->r8; - case 4: + *args++ = regs->si; + case 2: if (!n--) break; - *args++ = regs->r10; + *args++ = regs->dx; case 3: if (!n--) break; - *args++ = regs->dx; - case 2: + *args++ = regs->r10; + case 4: if (!n--) break; - *args++ = regs->si; - case 1: + *args++ = regs->r8; + case 5: if (!n--) break; - *args++ = regs->di; - case 0: + *args++ = regs->r9; + case 6: if (!n--) break; default: BUG(); @@ -154,55 +154,57 @@ static inline void syscall_set_arguments(struct task_struct *task, { # ifdef CONFIG_IA32_EMULATION if (task_thread_info(task)->status & TS_COMPAT) - switch (i + n) { - case 6: + switch (i) { + case 0: if (!n--) break; - regs->bp = *args++; - case 5: + regs->bx = *args++; + case 1: if (!n--) break; - regs->di = *args++; - case 4: + regs->cx = *args++; + case 2: if (!n--) break; - regs->si = *args++; + regs->dx = *args++; case 3: if (!n--) break; - regs->dx = *args++; - case 2: + regs->si = *args++; + case 4: if (!n--) break; - regs->cx = *args++; - case 1: + regs->di = *args++; + case 5: if (!n--) break; - regs->bx = *args++; - case 0: + regs->bp = *args++; + case 6: if (!n--) break; default: BUG(); + break; } else # endif - switch (i + n) { - case 6: + switch (i) { + case 0: if (!n--) break; - regs->r9 = *args++; - case 5: + regs->di = *args++; + case 1: if (!n--) break; - regs->r8 = *args++; - case 4: + regs->si = *args++; + case 2: if (!n--) break; - regs->r10 = *args++; + regs->dx = *args++; case 3: if (!n--) break; - regs->dx = *args++; - case 2: + regs->r10 = *args++; + case 4: if (!n--) break; - regs->si = *args++; - case 1: + regs->r8 = *args++; + case 5: if (!n--) break; - regs->di = *args++; - case 0: + regs->r9 = *args++; + case 6: if (!n--) break; default: BUG(); + break; } } diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 53b01a1ae10c..8c1f76abae9e 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -1137,7 +1137,7 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) return gsi; } if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - pr_debug(KERN_DEBUG "Pin %d-%d already programmed\n", + pr_debug("Pin %d-%d already programmed\n", mp_ioapic_routing[ioapic].apic_id, ioapic_pin); #ifdef CONFIG_X86_32 return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); @@ -1599,6 +1599,11 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"), }, }, + {} +}; + +/* second table for DMI checks that should run after early-quirks */ +static struct dmi_system_id __initdata acpi_dmi_table_late[] = { /* * HP laptops which use a DSDT reporting as HP/SB400/10000, * which includes some code which overrides all temperature @@ -1727,6 +1732,9 @@ int __init early_acpi_boot_init(void) int __init acpi_boot_init(void) { + /* those are executed after early-quirks are executed */ + dmi_check_system(acpi_dmi_table_late); + /* * If acpi_disabled, bail out * One exception: acpi=ht continues far enough to enumerate LAPICs diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index a26c480b9491..01b1244ef1c0 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -160,14 +160,16 @@ static void *c_start(struct seq_file *m, loff_t *pos) { if (*pos == 0) /* just in case, cpu 0 is not the first */ *pos = first_cpu(cpu_online_map); - if ((*pos) < nr_cpu_ids && cpu_online(*pos)) + else + *pos = next_cpu_nr(*pos - 1, cpu_online_map); + if ((*pos) < nr_cpu_ids) return &cpu_data(*pos); return NULL; } static void *c_next(struct seq_file *m, void *v, loff_t *pos) { - *pos = next_cpu(*pos, cpu_online_map); + (*pos)++; return c_start(m, pos); } diff --git a/arch/x86/kernel/dumpstack_32.c b/arch/x86/kernel/dumpstack_32.c index 1a78180f08d3..b3614752197b 100644 --- a/arch/x86/kernel/dumpstack_32.c +++ b/arch/x86/kernel/dumpstack_32.c @@ -405,7 +405,6 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic) panic("Non maskable interrupt"); console_silent(); spin_unlock(&nmi_print_lock); - bust_spinlocks(0); /* * If we are in kernel we are probably nested up pretty bad @@ -416,6 +415,7 @@ die_nmi(char *str, struct pt_regs *regs, int do_panic) crash_kexec(regs); } + bust_spinlocks(0); do_exit(SIGSEGV); } diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index c356423a6026..dd65143941a8 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -1024,7 +1024,7 @@ ENTRY(machine_check) RING0_INT_FRAME pushl $0 CFI_ADJUST_CFA_OFFSET 4 - pushl $do_machine_check + pushl machine_check_vector CFI_ADJUST_CFA_OFFSET 4 jmp error_code CFI_ENDPROC diff --git a/arch/x86/kernel/genapic_flat_64.c b/arch/x86/kernel/genapic_flat_64.c index 2ec2de8d8c46..c0262791bda4 100644 --- a/arch/x86/kernel/genapic_flat_64.c +++ b/arch/x86/kernel/genapic_flat_64.c @@ -25,7 +25,7 @@ #include <acpi/acpi_bus.h> #endif -static int __init flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int flat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { return 1; } @@ -170,7 +170,7 @@ struct genapic apic_flat = { * We cannot use logical delivery in this case because the mask * overflows, so use physical mode. */ -static int __init physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int physflat_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { #ifdef CONFIG_ACPI /* diff --git a/arch/x86/kernel/genx2apic_cluster.c b/arch/x86/kernel/genx2apic_cluster.c index e4bf2cc0d743..f6a2c8eb48a6 100644 --- a/arch/x86/kernel/genx2apic_cluster.c +++ b/arch/x86/kernel/genx2apic_cluster.c @@ -12,7 +12,7 @@ DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid); -static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (cpu_has_x2apic) return 1; diff --git a/arch/x86/kernel/genx2apic_phys.c b/arch/x86/kernel/genx2apic_phys.c index 8f1343df2627..d042211768b7 100644 --- a/arch/x86/kernel/genx2apic_phys.c +++ b/arch/x86/kernel/genx2apic_phys.c @@ -19,7 +19,7 @@ static int set_x2apic_phys_mode(char *arg) } early_param("x2apic_phys", set_x2apic_phys_mode); -static int __init x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (cpu_has_x2apic && x2apic_phys) return 1; diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index bfd532843df6..680a06557c5e 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -30,7 +30,7 @@ DEFINE_PER_CPU(int, x2apic_extra_bits); static enum uv_system_type uv_system_type; -static int __init uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) +static int uv_acpi_madt_oem_check(char *oem_id, char *oem_table_id) { if (!strcmp(oem_id, "SGI")) { if (!strcmp(oem_table_id, "UVL")) diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 410c88f0bfeb..ae0c0d3bb770 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -218,7 +218,7 @@ static void __init setup_node_to_cpumask_map(void) /* allocate the map */ map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t)); - pr_debug(KERN_DEBUG "Node to cpumask map at %p for %d nodes\n", + pr_debug("Node to cpumask map at %p for %d nodes\n", map, nr_node_ids); /* node_to_cpumask() will now work */ diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 7ece815ea637..7b1093397319 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -893,9 +893,11 @@ do_rest: smpboot_setup_warm_reset_vector(start_ip); /* * Be paranoid about clearing APIC errors. - */ - apic_write(APIC_ESR, 0); - apic_read(APIC_ESR); + */ + if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid])) { + apic_write(APIC_ESR, 0); + apic_read(APIC_ESR); + } } /* diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index 8b8c0d6640fa..04431f34fd16 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -6,7 +6,7 @@ * This code is released under the GNU General Public License version 2 or * later. */ -#include <linux/mc146818rtc.h> +#include <linux/seq_file.h> #include <linux/proc_fs.h> #include <linux/kernel.h> diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index e062974cce34..04d242ab0161 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -931,14 +931,6 @@ do_device_not_available(struct pt_regs *regs, long error) } #ifdef CONFIG_X86_32 -#ifdef CONFIG_X86_MCE -dotraplinkage void __kprobes do_machine_check(struct pt_regs *regs, long error) -{ - conditional_sti(regs); - machine_check_vector(regs, error); -} -#endif - dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code) { siginfo_t info; diff --git a/arch/x86/kernel/xsave.c b/arch/x86/kernel/xsave.c index 9abac8a9d823..b13acb75e822 100644 --- a/arch/x86/kernel/xsave.c +++ b/arch/x86/kernel/xsave.c @@ -248,7 +248,7 @@ clear: * This will be saved when ever the FP and extended state context is * saved on the user stack during the signal handler delivery to the user. */ -void prepare_fx_sw_frame(void) +static void prepare_fx_sw_frame(void) { int size_extended = (xstate_size - sizeof(struct i387_fxsave_struct)) + FP_XSTATE_MAGIC2_SIZE; diff --git a/arch/x86/mm/memtest.c b/arch/x86/mm/memtest.c index 672e17f8262a..9cab18b0b857 100644 --- a/arch/x86/mm/memtest.c +++ b/arch/x86/mm/memtest.c @@ -61,9 +61,9 @@ static void __init memtest(unsigned long start_phys, unsigned long size, last_bad += incr; } else { if (start_bad) { - printk(KERN_CONT "\n %010lx bad mem addr %010lx - %010lx reserved", + printk(KERN_CONT "\n %016lx bad mem addr %010lx - %010lx reserved", val, start_bad, last_bad + incr); - reserve_early(start_bad, last_bad - start_bad, "BAD RAM"); + reserve_early(start_bad, last_bad + incr, "BAD RAM"); } start_bad = last_bad = start_phys_aligned; } @@ -72,9 +72,8 @@ static void __init memtest(unsigned long start_phys, unsigned long size, if (start_bad) { printk(KERN_CONT "\n %016lx bad mem addr %010lx - %010lx reserved", val, start_bad, last_bad + incr); - reserve_early(start_bad, last_bad - start_bad, "BAD RAM"); + reserve_early(start_bad, last_bad + incr, "BAD RAM"); } - } /* default is disabled */ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index bbb3cae57492..8cb0b360bfd8 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1713,8 +1713,6 @@ unsigned ata_exec_internal_sg(struct ata_device *dev, else tag = 0; - if (test_and_set_bit(tag, &ap->qc_allocated)) - BUG(); qc = __ata_qc_from_tag(ap, tag); qc->tag = tag; @@ -4553,37 +4551,6 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words) } /** - * ata_qc_new - Request an available ATA command, for queueing - * @ap: Port associated with device @dev - * @dev: Device from whom we request an available command structure - * - * LOCKING: - * None. - */ - -static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) -{ - struct ata_queued_cmd *qc = NULL; - unsigned int i; - - /* no command while frozen */ - if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) - return NULL; - - /* the last tag is reserved for internal command. */ - for (i = 0; i < ATA_MAX_QUEUE - 1; i++) - if (!test_and_set_bit(i, &ap->qc_allocated)) { - qc = __ata_qc_from_tag(ap, i); - break; - } - - if (qc) - qc->tag = i; - - return qc; -} - -/** * ata_qc_new_init - Request an available ATA command, and initialize it * @dev: Device from whom we request an available command structure * @@ -4591,16 +4558,20 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap) * None. */ -struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) +struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag) { struct ata_port *ap = dev->link->ap; struct ata_queued_cmd *qc; - qc = ata_qc_new(ap); + if (unlikely(ap->pflags & ATA_PFLAG_FROZEN)) + return NULL; + + qc = __ata_qc_from_tag(ap, tag); if (qc) { qc->scsicmd = NULL; qc->ap = ap; qc->dev = dev; + qc->tag = tag; ata_qc_reinit(qc); } @@ -4608,31 +4579,6 @@ struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev) return qc; } -/** - * ata_qc_free - free unused ata_queued_cmd - * @qc: Command to complete - * - * Designed to free unused ata_queued_cmd object - * in case something prevents using it. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_qc_free(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int tag; - - WARN_ON(qc == NULL); /* ata_qc_from_tag _might_ return NULL */ - - qc->flags = 0; - tag = qc->tag; - if (likely(ata_tag_valid(tag))) { - qc->tag = ATA_TAG_POISON; - clear_bit(tag, &ap->qc_allocated); - } -} - void __ata_qc_complete(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 5d312dc9be9f..d5b9b7266c8b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -708,7 +708,7 @@ static struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev, { struct ata_queued_cmd *qc; - qc = ata_qc_new_init(dev); + qc = ata_qc_new_init(dev, cmd->request->tag); if (qc) { qc->scsicmd = cmd; qc->scsidone = done; @@ -1103,7 +1103,8 @@ static int ata_scsi_dev_config(struct scsi_device *sdev, depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id)); depth = min(ATA_MAX_QUEUE - 1, depth); - scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth); + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); + scsi_activate_tcq(sdev, depth); } return 0; @@ -1943,6 +1944,11 @@ static unsigned int ata_scsiop_inq_std(struct ata_scsi_args *args, u8 *rbuf) hdr[1] |= (1 << 7); memcpy(rbuf, hdr, sizeof(hdr)); + + /* if ncq, set tags supported */ + if (ata_id_has_ncq(args->id)) + rbuf[7] |= (1 << 1); + memcpy(&rbuf[8], "ATA ", 8); ata_id_string(args->id, &rbuf[16], ATA_ID_PROD, 16); ata_id_string(args->id, &rbuf[32], ATA_ID_FW_REV, 4); diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index fe2839e58774..d3831d39bdaa 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -74,7 +74,7 @@ extern struct ata_link *ata_dev_phys_link(struct ata_device *dev); extern void ata_force_cbl(struct ata_port *ap); extern u64 ata_tf_to_lba(const struct ata_taskfile *tf); extern u64 ata_tf_to_lba48(const struct ata_taskfile *tf); -extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev); +extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev, int tag); extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev, u64 block, u32 n_block, unsigned int tf_flags, unsigned int tag); @@ -103,7 +103,6 @@ extern int ata_dev_configure(struct ata_device *dev); extern int sata_down_spd_limit(struct ata_link *link); extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel); extern void ata_sg_clean(struct ata_queued_cmd *qc); -extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); extern int atapi_check_dma(struct ata_queued_cmd *qc); @@ -119,6 +118,22 @@ extern struct ata_port *ata_port_alloc(struct ata_host *host); extern void ata_dev_enable_pm(struct ata_device *dev, enum link_pm policy); extern void ata_lpm_schedule(struct ata_port *ap, enum link_pm); +/** + * ata_qc_free - free unused ata_queued_cmd + * @qc: Command to complete + * + * Designed to free unused ata_queued_cmd object + * in case something prevents using it. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +static inline void ata_qc_free(struct ata_queued_cmd *qc) +{ + qc->flags = 0; + qc->tag = ATA_TAG_POISON; +} + /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI extern void ata_acpi_associate_sata_port(struct ata_port *ap); diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 8317fdef1691..3d1ab8fa9acc 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -42,8 +42,9 @@ config TOUCHSCREEN_BITSY module will be called h3600_ts_input. config TOUCHSCREEN_CORGI - tristate "SharpSL (Corgi and Spitz series) touchscreen driver" + tristate "SharpSL (Corgi and Spitz series) touchscreen driver (DEPRECATED)" depends on PXA_SHARPSL + select CORGI_SSP_DEPRECATED default y help Say Y here to enable the driver for the touchscreen on the @@ -54,6 +55,9 @@ config TOUCHSCREEN_CORGI To compile this driver as a module, choose M here: the module will be called corgi_ts. + NOTE: this driver is deprecated, try enable SPI and generic + ADS7846-based touchscreen driver. + config TOUCHSCREEN_FUJITSU tristate "Fujitsu serial touchscreen" select SERIO diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index c7ff1e11ea85..e7fb7d2fcbfc 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -113,11 +113,12 @@ config LEDS_GPIO outputs. To be useful the particular board must have LEDs and they must be connected to the GPIO lines. -config LEDS_CM_X270 - tristate "LED Support for the CM-X270 LEDs" - depends on LEDS_CLASS && MACH_ARMCORE +config LEDS_HP_DISK + tristate "LED Support for disk protection LED on HP notebooks" + depends on LEDS_CLASS && ACPI help - This option enables support for the CM-X270 LEDs. + This option enable support for disk protection LED, found on + newer HP notebooks. config LEDS_CLEVO_MAIL tristate "Mail LED on Clevo notebook (EXPERIMENTAL)" @@ -157,6 +158,13 @@ config LEDS_PCA955X LED driver chips accessed via the I2C bus. Supported devices include PCA9550, PCA9551, PCA9552, and PCA9553. +config LEDS_DA903X + tristate "LED Support for DA9030/DA9034 PMIC" + depends on LEDS_CLASS && PMIC_DA903X + help + This option enables support for on-chip LED drivers found + on Dialog Semiconductor DA9030/DA9034 PMICs. + comment "LED Triggers" config LEDS_TRIGGERS @@ -193,6 +201,15 @@ config LEDS_TRIGGER_HEARTBEAT load average. If unsure, say Y. +config LEDS_TRIGGER_BACKLIGHT + tristate "LED backlight Trigger" + depends on LEDS_TRIGGERS + help + This allows LEDs to be controlled as a backlight device: they + turn off and on when the display is blanked and unblanked. + + If unsure, say N. + config LEDS_TRIGGER_DEFAULT_ON tristate "LED Default ON Trigger" depends on LEDS_TRIGGERS diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile index eb186c351a1c..e1967a29850e 100644 --- a/drivers/leds/Makefile +++ b/drivers/leds/Makefile @@ -17,14 +17,16 @@ obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunfire.o obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o -obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o +obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o +obj-$(CONFIG_LEDS_HP_DISK) += leds-hp-disk.o # LED Triggers obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o obj-$(CONFIG_LEDS_TRIGGER_IDE_DISK) += ledtrig-ide-disk.o obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o +obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o diff --git a/drivers/leds/led-class.c b/drivers/leds/led-class.c index ee74ee7b2acc..6c4a326176d7 100644 --- a/drivers/leds/led-class.c +++ b/drivers/leds/led-class.c @@ -34,14 +34,11 @@ static ssize_t led_brightness_show(struct device *dev, struct device_attribute *attr, char *buf) { struct led_classdev *led_cdev = dev_get_drvdata(dev); - ssize_t ret = 0; /* no lock needed for this */ led_update_brightness(led_cdev); - sprintf(buf, "%u\n", led_cdev->brightness); - ret = strlen(buf) + 1; - return ret; + return sprintf(buf, "%u\n", led_cdev->brightness); } static ssize_t led_brightness_store(struct device *dev, @@ -113,6 +110,9 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) if (rc) goto err_out; +#ifdef CONFIG_LEDS_TRIGGERS + init_rwsem(&led_cdev->trigger_lock); +#endif /* add to the list of leds */ down_write(&leds_list_lock); list_add_tail(&led_cdev->node, &leds_list); @@ -121,8 +121,6 @@ int led_classdev_register(struct device *parent, struct led_classdev *led_cdev) led_update_brightness(led_cdev); #ifdef CONFIG_LEDS_TRIGGERS - init_rwsem(&led_cdev->trigger_lock); - rc = device_create_file(led_cdev->dev, &dev_attr_trigger); if (rc) goto err_out_led_list; @@ -147,7 +145,7 @@ err_out: EXPORT_SYMBOL_GPL(led_classdev_register); /** - * __led_classdev_unregister - unregisters a object of led_properties class. + * led_classdev_unregister - unregisters a object of led_properties class. * @led_cdev: the led device to unregister * * Unregisters a previously registered via led_classdev_register object. diff --git a/drivers/leds/leds-ams-delta.c b/drivers/leds/leds-ams-delta.c index 32c98b2efa3f..1bd590bb3a6e 100644 --- a/drivers/leds/leds-ams-delta.c +++ b/drivers/leds/leds-ams-delta.c @@ -107,27 +107,27 @@ static int ams_delta_led_resume(struct platform_device *dev) static int ams_delta_led_probe(struct platform_device *pdev) { - int i; - int ret; + int i, ret; - for (i = ret = 0; ret >= 0 && i < ARRAY_SIZE(ams_delta_leds); i++) { + for (i = 0; i < ARRAY_SIZE(ams_delta_leds); i++) { ret = led_classdev_register(&pdev->dev, &ams_delta_leds[i].cdev); + if (ret < 0) + goto fail; } - if (ret < 0 && i > 1) { - for (i = i - 2; i >= 0; i--) - led_classdev_unregister(&ams_delta_leds[i].cdev); - } - - return ret; + return 0; +fail: + while (--i >= 0) + led_classdev_unregister(&ams_delta_leds[i].cdev); + return ret; } static int ams_delta_led_remove(struct platform_device *pdev) { int i; - for (i = ARRAY_SIZE(ams_delta_leds) - 1; i >= 0; i--) + for (i = 0; i < ARRAY_SIZE(ams_delta_leds); i--) led_classdev_unregister(&ams_delta_leds[i].cdev); return 0; diff --git a/drivers/leds/leds-cm-x270.c b/drivers/leds/leds-cm-x270.c deleted file mode 100644 index 836a43d776e6..000000000000 --- a/drivers/leds/leds-cm-x270.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * drivers/leds/leds-cm-x270.c - * - * Copyright 2007 CompuLab Ltd. - * Author: Mike Rapoport <mike@compulab.co.il> - * - * Based on leds-corgi.c - * Author: Richard Purdie <rpurdie@openedhand.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/leds.h> - -#include <mach/hardware.h> -#include <mach/pxa-regs.h> - -#define GPIO_RED_LED (93) -#define GPIO_GREEN_LED (94) - -static void cmx270_red_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - if (value) - GPCR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED); - else - GPSR(GPIO_RED_LED) = GPIO_bit(GPIO_RED_LED); -} - -static void cmx270_green_set(struct led_classdev *led_cdev, - enum led_brightness value) -{ - if (value) - GPCR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED); - else - GPSR(GPIO_GREEN_LED) = GPIO_bit(GPIO_GREEN_LED); -} - -static struct led_classdev cmx270_red_led = { - .name = "cm-x270:red", - .default_trigger = "nand-disk", - .brightness_set = cmx270_red_set, -}; - -static struct led_classdev cmx270_green_led = { - .name = "cm-x270:green", - .default_trigger = "heartbeat", - .brightness_set = cmx270_green_set, -}; - -#ifdef CONFIG_PM -static int cmx270led_suspend(struct platform_device *dev, pm_message_t state) -{ - led_classdev_suspend(&cmx270_red_led); - led_classdev_suspend(&cmx270_green_led); - return 0; -} - -static int cmx270led_resume(struct platform_device *dev) -{ - led_classdev_resume(&cmx270_red_led); - led_classdev_resume(&cmx270_green_led); - return 0; -} -#endif - -static int cmx270led_probe(struct platform_device *pdev) -{ - int ret; - - ret = led_classdev_register(&pdev->dev, &cmx270_red_led); - if (ret < 0) - return ret; - - ret = led_classdev_register(&pdev->dev, &cmx270_green_led); - if (ret < 0) - led_classdev_unregister(&cmx270_red_led); - - return ret; -} - -static int cmx270led_remove(struct platform_device *pdev) -{ - led_classdev_unregister(&cmx270_red_led); - led_classdev_unregister(&cmx270_green_led); - return 0; -} - -static struct platform_driver cmx270led_driver = { - .probe = cmx270led_probe, - .remove = cmx270led_remove, -#ifdef CONFIG_PM - .suspend = cmx270led_suspend, - .resume = cmx270led_resume, -#endif - .driver = { - .name = "cm-x270-led", - .owner = THIS_MODULE, - }, -}; - -static int __init cmx270led_init(void) -{ - return platform_driver_register(&cmx270led_driver); -} - -static void __exit cmx270led_exit(void) -{ - platform_driver_unregister(&cmx270led_driver); -} - -module_init(cmx270led_init); -module_exit(cmx270led_exit); - -MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>"); -MODULE_DESCRIPTION("CM-x270 LED driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:cm-x270-led"); diff --git a/drivers/leds/leds-da903x.c b/drivers/leds/leds-da903x.c new file mode 100644 index 000000000000..f1fddb18d70d --- /dev/null +++ b/drivers/leds/leds-da903x.c @@ -0,0 +1,175 @@ +/* + * LEDs driver for Dialog Semiconductor DA9030/DA9034 + * + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/leds.h> +#include <linux/mfd/da903x.h> + +#define DA9030_LED1_CONTROL 0x20 +#define DA9030_LED2_CONTROL 0x21 +#define DA9030_LED3_CONTROL 0x22 +#define DA9030_LED4_CONTROL 0x23 +#define DA9030_LEDPC_CONTROL 0x24 +#define DA9030_MISC_CONTROL_A 0x26 /* Vibrator Control */ + +#define DA9034_LED1_CONTROL 0x35 +#define DA9034_LED2_CONTROL 0x36 +#define DA9034_VIBRA 0x40 + +struct da903x_led { + struct led_classdev cdev; + struct work_struct work; + struct device *master; + enum led_brightness new_brightness; + int id; + int flags; +}; + +#define DA9030_LED_OFFSET(id) ((id) - DA9030_ID_LED_1) +#define DA9034_LED_OFFSET(id) ((id) - DA9034_ID_LED_1) + +static void da903x_led_work(struct work_struct *work) +{ + struct da903x_led *led = container_of(work, struct da903x_led, work); + uint8_t val; + int offset; + + switch (led->id) { + case DA9030_ID_LED_1: + case DA9030_ID_LED_2: + case DA9030_ID_LED_3: + case DA9030_ID_LED_4: + case DA9030_ID_LED_PC: + offset = DA9030_LED_OFFSET(led->id); + val = led->flags & ~0x87; + val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */ + val |= (led->new_brightness >> 5) & 0x7; /* PWM<2:0> */ + da903x_write(led->master, DA9030_LED1_CONTROL + offset, val); + break; + case DA9030_ID_VIBRA: + val = led->flags & ~0x80; + val |= (led->new_brightness) ? 0x80 : 0; /* EN bit */ + da903x_write(led->master, DA9030_MISC_CONTROL_A, val); + break; + case DA9034_ID_LED_1: + case DA9034_ID_LED_2: + offset = DA9034_LED_OFFSET(led->id); + val = (led->new_brightness * 0x5f / LED_FULL) & 0x7f; + val |= (led->flags & DA9034_LED_RAMP) ? 0x80 : 0; + da903x_write(led->master, DA9034_LED1_CONTROL + offset, val); + break; + case DA9034_ID_VIBRA: + val = led->new_brightness & 0xfe; + da903x_write(led->master, DA9034_VIBRA, val); + break; + } +} + +static void da903x_led_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + struct da903x_led *led; + + led = container_of(led_cdev, struct da903x_led, cdev); + led->new_brightness = value; + schedule_work(&led->work); +} + +static int __devinit da903x_led_probe(struct platform_device *pdev) +{ + struct led_info *pdata = pdev->dev.platform_data; + struct da903x_led *led; + int id, ret; + + if (pdata == NULL) + return 0; + + id = pdev->id; + + if (!((id >= DA9030_ID_LED_1 && id <= DA9030_ID_VIBRA) || + (id >= DA9034_ID_LED_1 && id <= DA9034_ID_VIBRA))) { + dev_err(&pdev->dev, "invalid LED ID (%d) specified\n", id); + return -EINVAL; + } + + led = kzalloc(sizeof(struct da903x_led), GFP_KERNEL); + if (led == NULL) { + dev_err(&pdev->dev, "failed to alloc memory for LED%d\n", id); + return -ENOMEM; + } + + led->cdev.name = pdata->name; + led->cdev.default_trigger = pdata->default_trigger; + led->cdev.brightness_set = da903x_led_set; + led->cdev.brightness = LED_OFF; + + led->id = id; + led->flags = pdata->flags; + led->master = pdev->dev.parent; + led->new_brightness = LED_OFF; + + INIT_WORK(&led->work, da903x_led_work); + + ret = led_classdev_register(led->master, &led->cdev); + if (ret) { + dev_err(&pdev->dev, "failed to register LED %d\n", id); + goto err; + } + + platform_set_drvdata(pdev, led); + return 0; + +err: + kfree(led); + return ret; +} + +static int __devexit da903x_led_remove(struct platform_device *pdev) +{ + struct da903x_led *led = platform_get_drvdata(pdev); + + led_classdev_unregister(&led->cdev); + kfree(led); + return 0; +} + +static struct platform_driver da903x_led_driver = { + .driver = { + .name = "da903x-led", + .owner = THIS_MODULE, + }, + .probe = da903x_led_probe, + .remove = __devexit_p(da903x_led_remove), +}; + +static int __init da903x_led_init(void) +{ + return platform_driver_register(&da903x_led_driver); +} +module_init(da903x_led_init); + +static void __exit da903x_led_exit(void) +{ + platform_driver_unregister(&da903x_led_driver); +} +module_exit(da903x_led_exit); + +MODULE_DESCRIPTION("LEDs driver for Dialog Semiconductor DA9030/DA9034"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" + "Mike Rapoport <mike@compulab.co.il>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da903x-led"); diff --git a/drivers/leds/leds-hp-disk.c b/drivers/leds/leds-hp-disk.c new file mode 100644 index 000000000000..53a25b1c2dae --- /dev/null +++ b/drivers/leds/leds-hp-disk.c @@ -0,0 +1,156 @@ +/* + * leds-hp-disk.c - driver for HP "hard disk protection" LED + * + * Copyright (C) 2008 Pavel Machek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/dmi.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/kthread.h> +#include <linux/version.h> +#include <linux/leds.h> +#include <acpi/acpi_drivers.h> + +#define DRIVER_NAME "leds-hp-disk" +#define ACPI_MDPS_CLASS "led" + +/* For automatic insertion of the module */ +static struct acpi_device_id hpled_device_ids[] = { + {"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */ + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, hpled_device_ids); + +struct acpi_hpled { + struct acpi_device *device; /* The ACPI device */ +}; + +static struct acpi_hpled adev; + +static acpi_status hpled_acpi_write(acpi_handle handle, int reg) +{ + unsigned long ret; /* Not used when writing */ + union acpi_object in_obj[1]; + struct acpi_object_list args = { 1, in_obj }; + + in_obj[0].type = ACPI_TYPE_INTEGER; + in_obj[0].integer.value = reg; + + return acpi_evaluate_integer(handle, "ALED", &args, &ret); +} + +static void hpled_set(struct led_classdev *led_cdev, + enum led_brightness value) +{ + hpled_acpi_write(adev.device->handle, !!value); +} + +static struct led_classdev hpled_led = { + .name = "hp:red:hddprotection", + .default_trigger = "heartbeat", + .brightness_set = hpled_set, +}; + +#ifdef CONFIG_PM +static int hpled_suspend(struct acpi_device *dev, pm_message_t state) +{ + led_classdev_suspend(&hpled_led); + return 0; +} + +static int hpled_resume(struct acpi_device *dev) +{ + led_classdev_resume(&hpled_led); + return 0; +} +#else +#define hpled_suspend NULL +#define hpled_resume NULL +#endif + +static int hpled_add(struct acpi_device *device) +{ + int ret; + + if (!device) + return -EINVAL; + + adev.device = device; + strcpy(acpi_device_name(device), DRIVER_NAME); + strcpy(acpi_device_class(device), ACPI_MDPS_CLASS); + device->driver_data = &adev; + + ret = led_classdev_register(NULL, &hpled_led); + return ret; +} + +static int hpled_remove(struct acpi_device *device, int type) +{ + if (!device) + return -EINVAL; + + led_classdev_unregister(&hpled_led); + return 0; +} + + + +static struct acpi_driver leds_hp_driver = { + .name = DRIVER_NAME, + .class = ACPI_MDPS_CLASS, + .ids = hpled_device_ids, + .ops = { + .add = hpled_add, + .remove = hpled_remove, + .suspend = hpled_suspend, + .resume = hpled_resume, + } +}; + +static int __init hpled_init_module(void) +{ + int ret; + + if (acpi_disabled) + return -ENODEV; + + ret = acpi_bus_register_driver(&leds_hp_driver); + if (ret < 0) + return ret; + + printk(KERN_INFO DRIVER_NAME " driver loaded.\n"); + + return 0; +} + +static void __exit hpled_exit_module(void) +{ + acpi_bus_unregister_driver(&leds_hp_driver); +} + +MODULE_DESCRIPTION("Driver for HP disk protection LED"); +MODULE_AUTHOR("Pavel Machek <pavel@suse.cz>"); +MODULE_LICENSE("GPL"); + +module_init(hpled_init_module); +module_exit(hpled_exit_module); diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c index f508729123b5..4e2d1a42b48f 100644 --- a/drivers/leds/leds-pca955x.c +++ b/drivers/leds/leds-pca955x.c @@ -226,7 +226,7 @@ static void pca955x_led_work(struct work_struct *work) pca955x_write_ls(pca955x->client, chip_ls, ls); } -void pca955x_led_set(struct led_classdev *led_cdev, enum led_brightness value) +static void pca955x_led_set(struct led_classdev *led_cdev, enum led_brightness value) { struct pca955x_led *pca955x; diff --git a/drivers/leds/leds-wrap.c b/drivers/leds/leds-wrap.c index 7ac61a7b56ad..2f3aa87f2a1f 100644 --- a/drivers/leds/leds-wrap.c +++ b/drivers/leds/leds-wrap.c @@ -53,8 +53,9 @@ static void wrap_extra_led_set(struct led_classdev *led_cdev, } static struct led_classdev wrap_power_led = { - .name = "wrap::power", - .brightness_set = wrap_power_led_set, + .name = "wrap::power", + .brightness_set = wrap_power_led_set, + .default_trigger = "default-on", }; static struct led_classdev wrap_error_led = { diff --git a/drivers/leds/ledtrig-backlight.c b/drivers/leds/ledtrig-backlight.c new file mode 100644 index 000000000000..d3dfcfb417b8 --- /dev/null +++ b/drivers/leds/ledtrig-backlight.c @@ -0,0 +1,110 @@ +/* + * Backlight emulation LED trigger + * + * Copyright 2008 (C) Rodolfo Giometti <giometti@linux.it> + * Copyright 2008 (C) Eurotech S.p.A. <info@eurotech.it> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/fb.h> +#include <linux/leds.h> +#include "leds.h" + +#define BLANK 1 +#define UNBLANK 0 + +struct bl_trig_notifier { + struct led_classdev *led; + int brightness; + int old_status; + struct notifier_block notifier; +}; + +static int fb_notifier_callback(struct notifier_block *p, + unsigned long event, void *data) +{ + struct bl_trig_notifier *n = container_of(p, + struct bl_trig_notifier, notifier); + struct led_classdev *led = n->led; + struct fb_event *fb_event = data; + int *blank = fb_event->data; + + switch (event) { + case FB_EVENT_BLANK : + if (*blank && n->old_status == UNBLANK) { + n->brightness = led->brightness; + led_set_brightness(led, LED_OFF); + n->old_status = BLANK; + } else if (!*blank && n->old_status == BLANK) { + led_set_brightness(led, n->brightness); + n->old_status = UNBLANK; + } + break; + } + + return 0; +} + +static void bl_trig_activate(struct led_classdev *led) +{ + int ret; + + struct bl_trig_notifier *n; + + n = kzalloc(sizeof(struct bl_trig_notifier), GFP_KERNEL); + led->trigger_data = n; + if (!n) { + dev_err(led->dev, "unable to allocate backlight trigger\n"); + return; + } + + n->led = led; + n->brightness = led->brightness; + n->old_status = UNBLANK; + n->notifier.notifier_call = fb_notifier_callback; + + ret = fb_register_client(&n->notifier); + if (ret) + dev_err(led->dev, "unable to register backlight trigger\n"); +} + +static void bl_trig_deactivate(struct led_classdev *led) +{ + struct bl_trig_notifier *n = + (struct bl_trig_notifier *) led->trigger_data; + + if (n) { + fb_unregister_client(&n->notifier); + kfree(n); + } +} + +static struct led_trigger bl_led_trigger = { + .name = "backlight", + .activate = bl_trig_activate, + .deactivate = bl_trig_deactivate +}; + +static int __init bl_trig_init(void) +{ + return led_trigger_register(&bl_led_trigger); +} + +static void __exit bl_trig_exit(void) +{ + led_trigger_unregister(&bl_led_trigger); +} + +module_init(bl_trig_init); +module_exit(bl_trig_exit); + +MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); +MODULE_DESCRIPTION("Backlight emulation LED trigger"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index 5c99f4f0c692..db681962d7bb 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -70,9 +70,7 @@ static ssize_t led_delay_on_show(struct device *dev, struct led_classdev *led_cdev = dev_get_drvdata(dev); struct timer_trig_data *timer_data = led_cdev->trigger_data; - sprintf(buf, "%lu\n", timer_data->delay_on); - - return strlen(buf) + 1; + return sprintf(buf, "%lu\n", timer_data->delay_on); } static ssize_t led_delay_on_store(struct device *dev, @@ -116,9 +114,7 @@ static ssize_t led_delay_off_show(struct device *dev, struct led_classdev *led_cdev = dev_get_drvdata(dev); struct timer_trig_data *timer_data = led_cdev->trigger_data; - sprintf(buf, "%lu\n", timer_data->delay_off); - - return strlen(buf) + 1; + return sprintf(buf, "%lu\n", timer_data->delay_off); } static ssize_t led_delay_off_store(struct device *dev, diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index 9f9354fd3516..d62fd4f6b52e 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -1760,10 +1760,9 @@ mptscsih_get_tm_timeout(MPT_ADAPTER *ioc) case FC: return 40; case SAS: - return 10; case SPI: default: - return 2; + return 10; } } diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index b92c19bb6876..5311317c2e4c 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1924,12 +1924,9 @@ static void twa_scsiop_execute_scsi_complete(TW_Device_Extension *tw_dev, int re (cmd->sc_data_direction == DMA_FROM_DEVICE || cmd->sc_data_direction == DMA_BIDIRECTIONAL)) { if (scsi_sg_count(cmd) == 1) { - unsigned long flags; void *buf = tw_dev->generic_buffer_virt[request_id]; - local_irq_save(flags); scsi_sg_copy_from_buffer(cmd, buf, TW_SECTOR_SIZE); - local_irq_restore(flags); } } } /* End twa_scsiop_execute_scsi_complete() */ diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c index a0537f09aa21..c03f1d2c9e2e 100644 --- a/drivers/scsi/3w-xxxx.c +++ b/drivers/scsi/3w-xxxx.c @@ -1466,12 +1466,7 @@ static int tw_scsiop_inquiry(TW_Device_Extension *tw_dev, int request_id) static void tw_transfer_internal(TW_Device_Extension *tw_dev, int request_id, void *data, unsigned int len) { - struct scsi_cmnd *cmd = tw_dev->srb[request_id]; - unsigned long flags; - - local_irq_save(flags); - scsi_sg_copy_from_buffer(cmd, data, len); - local_irq_restore(flags); + scsi_sg_copy_from_buffer(tw_dev->srb[request_id], data, len); } /* This function is called by the isr to complete an inquiry command */ diff --git a/drivers/scsi/aic7xxx/aic79xx.reg b/drivers/scsi/aic7xxx/aic79xx.reg index cca16fc5b4ad..0666c22ab55b 100644 --- a/drivers/scsi/aic7xxx/aic79xx.reg +++ b/drivers/scsi/aic7xxx/aic79xx.reg @@ -80,6 +80,17 @@ VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic79xx.reg#77 $" } /* + * Registers marked "dont_generate_debug_code" are not (yet) referenced + * from the driver code, and this keyword inhibit generation + * of debug code for them. + * + * REG_PRETTY_PRINT config will complain if dont_generate_debug_code + * is added to the register which is referenced in the driver. + * Unreferenced register with no dont_generate_debug_code will result + * in dead code. No warning is issued. + */ + +/* * Mode Pointer * Controls which of the 5, 512byte, address spaces should be used * as the source and destination of any register accesses in our @@ -91,6 +102,7 @@ register MODE_PTR { field DST_MODE 0x70 field SRC_MODE 0x07 mode_pointer + dont_generate_debug_code } const SRC_MODE_SHIFT 0 @@ -190,6 +202,7 @@ register SEQINTCODE { SAW_HWERR, BAD_SCB_STATUS } + dont_generate_debug_code } /* @@ -207,6 +220,7 @@ register CLRINT { field CLRSEQINT 0x04 field CLRCMDINT 0x02 field CLRSPLTINT 0x01 + dont_generate_debug_code } /* @@ -222,6 +236,7 @@ register ERROR { field SQPARERR 0x08 field ILLOPCODE 0x04 field DSCTMOUT 0x02 + dont_generate_debug_code } /* @@ -255,6 +270,7 @@ register HCNTRL { field INTEN 0x02 field CHIPRST 0x01 field CHIPRSTACK 0x01 + dont_generate_debug_code } /* @@ -265,6 +281,7 @@ register HNSCB_QOFF { access_mode RW size 2 count 2 + dont_generate_debug_code } /* @@ -274,6 +291,7 @@ register HESCB_QOFF { address 0x008 access_mode RW count 2 + dont_generate_debug_code } /* @@ -311,6 +329,7 @@ register CLRSEQINTSTAT { field CLRSEQ_SCSIINT 0x04 field CLRSEQ_PCIINT 0x02 field CLRSEQ_SPLTINT 0x01 + dont_generate_debug_code } /* @@ -320,6 +339,7 @@ register SWTIMER { address 0x00E access_mode RW size 2 + dont_generate_debug_code } /* @@ -330,6 +350,7 @@ register SNSCB_QOFF { access_mode RW size 2 modes M_CCHAN + dont_generate_debug_code } /* @@ -340,6 +361,7 @@ register SESCB_QOFF { count 2 access_mode RW modes M_CCHAN + dont_generate_debug_code } /* @@ -350,6 +372,7 @@ register SDSCB_QOFF { access_mode RW modes M_CCHAN size 2 + dont_generate_debug_code } /* @@ -378,6 +401,7 @@ register QOFF_CTLSTA { SCB_QSIZE_8192, SCB_QSIZE_16384 } + dont_generate_debug_code } /* @@ -431,6 +455,7 @@ register DSCOMMAND0 { field EXTREQLCK 0x10 /* External Request Lock */ field DISABLE_TWATE 0x02 /* Rev B or greater */ field CIOPARCKEN 0x01 /* Internal bus parity error enable */ + dont_generate_debug_code } /* @@ -459,6 +484,7 @@ register SG_CACHE_PRE { field SG_ADDR_MASK 0xf8 field ODD_SEG 0x04 field LAST_SEG 0x02 + dont_generate_debug_code } register SG_CACHE_SHADOW { @@ -491,6 +517,7 @@ register HADDR { access_mode RW size 8 modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -522,6 +549,7 @@ register HCNT { access_mode RW size 3 modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -551,6 +579,7 @@ register SGHADDR { access_mode RW size 8 modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -561,6 +590,7 @@ register SCBHADDR { access_mode RW size 8 modes M_CCHAN + dont_generate_debug_code } /* @@ -570,6 +600,7 @@ register SGHCNT { address 0x084 access_mode RW modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -579,6 +610,7 @@ register SCBHCNT { address 0x084 access_mode RW modes M_CCHAN + dont_generate_debug_code } /* @@ -609,6 +641,7 @@ register DFF_THRSH { RD_DFTHRSH_90, RD_DFTHRSH_MAX } + dont_generate_debug_code } /* @@ -817,6 +850,7 @@ register PCIXCTL { field SRSPDPEEN 0x04 field TSCSERREN 0x02 field CMPABCDIS 0x01 + dont_generate_debug_code } /* @@ -863,6 +897,7 @@ register DCHSPLTSTAT0 { field RXOVRUN 0x04 field RXSCEMSG 0x02 field RXSPLTRSP 0x01 + dont_generate_debug_code } /* @@ -908,6 +943,7 @@ register DCHSPLTSTAT1 { modes M_DFF0, M_DFF1 count 2 field RXDATABUCKET 0x01 + dont_generate_debug_code } /* @@ -1069,6 +1105,7 @@ register SGSPLTSTAT0 { field RXOVRUN 0x04 field RXSCEMSG 0x02 field RXSPLTRSP 0x01 + dont_generate_debug_code } /* @@ -1080,6 +1117,7 @@ register SGSPLTSTAT1 { modes M_DFF0, M_DFF1 count 2 field RXDATABUCKET 0x01 + dont_generate_debug_code } /* @@ -1091,6 +1129,7 @@ register SFUNCT { modes M_CFG field TEST_GROUP 0xF0 field TEST_NUM 0x0F + dont_generate_debug_code } /* @@ -1109,6 +1148,7 @@ register DF0PCISTAT { field RDPERR 0x04 field TWATERR 0x02 field DPR 0x01 + dont_generate_debug_code } /* @@ -1204,6 +1244,7 @@ register TARGPCISTAT { field SSE 0x40 field STA 0x08 field TWATERR 0x02 + dont_generate_debug_code } /* @@ -1216,6 +1257,7 @@ register LQIN { size 20 count 2 modes M_DFF0, M_DFF1, M_SCSI + dont_generate_debug_code } /* @@ -1247,6 +1289,7 @@ register LUNPTR { access_mode RW modes M_CFG count 2 + dont_generate_debug_code } /* @@ -1278,6 +1321,7 @@ register CMDLENPTR { access_mode RW modes M_CFG count 1 + dont_generate_debug_code } /* @@ -1290,6 +1334,7 @@ register ATTRPTR { access_mode RW modes M_CFG count 1 + dont_generate_debug_code } /* @@ -1302,6 +1347,7 @@ register FLAGPTR { access_mode RW modes M_CFG count 1 + dont_generate_debug_code } /* @@ -1313,6 +1359,7 @@ register CMDPTR { access_mode RW modes M_CFG count 1 + dont_generate_debug_code } /* @@ -1324,6 +1371,7 @@ register QNEXTPTR { access_mode RW modes M_CFG count 1 + dont_generate_debug_code } /* @@ -1347,6 +1395,7 @@ register ABRTBYTEPTR { access_mode RW modes M_CFG count 1 + dont_generate_debug_code } /* @@ -1358,6 +1407,7 @@ register ABRTBITPTR { access_mode RW modes M_CFG count 1 + dont_generate_debug_code } /* @@ -1398,6 +1448,7 @@ register LUNLEN { count 2 mask ILUNLEN 0x0F mask TLUNLEN 0xF0 + dont_generate_debug_code } const LUNLEN_SINGLE_LEVEL_LUN 0xF @@ -1410,6 +1461,7 @@ register CDBLIMIT { access_mode RW modes M_CFG count 1 + dont_generate_debug_code } /* @@ -1422,6 +1474,7 @@ register MAXCMD { access_mode RW modes M_CFG count 9 + dont_generate_debug_code } /* @@ -1432,6 +1485,7 @@ register MAXCMDCNT { address 0x033 access_mode RW modes M_CFG + dont_generate_debug_code } /* @@ -1490,6 +1544,7 @@ register LQCTL1 { field PCI2PCI 0x04 field SINGLECMD 0x02 field ABORTPENDING 0x01 + dont_generate_debug_code } /* @@ -1508,6 +1563,7 @@ register LQCTL2 { field LQOCONTINUE 0x04 field LQOTOIDLE 0x02 field LQOPAUSE 0x01 + dont_generate_debug_code } /* @@ -1578,6 +1634,7 @@ register SXFRCTL0 { field DFPEXP 0x40 field BIOSCANCELEN 0x10 field SPIOEN 0x08 + dont_generate_debug_code } /* @@ -1594,6 +1651,7 @@ register SXFRCTL1 { field ENSTIMER 0x04 field ACTNEGEN 0x02 field STPWEN 0x01 + dont_generate_debug_code } /* @@ -1696,6 +1754,7 @@ register SCSISIGO { P_STATUS CDO|IOO, P_MESGIN CDO|IOO|MSGO } + dont_generate_debug_code } /* @@ -1738,6 +1797,7 @@ register MULTARGID { modes M_CFG size 2 count 2 + dont_generate_debug_code } /* @@ -1774,6 +1834,7 @@ register SCSIDAT { access_mode RW modes M_DFF0, M_DFF1, M_SCSI size 2 + dont_generate_debug_code } /* @@ -1796,6 +1857,7 @@ register TARGIDIN { count 2 field CLKOUT 0x80 field TARGID 0x0F + dont_generate_debug_code } /* @@ -1825,6 +1887,7 @@ register SBLKCTL { field ENAB40 0x08 /* LVD transceiver active */ field ENAB20 0x04 /* SE/HVD transceiver active */ field SELWIDE 0x02 + dont_generate_debug_code } /* @@ -1842,6 +1905,7 @@ register OPTIONMODE { field ENDGFORMCHK 0x04 field AUTO_MSGOUT_DE 0x02 mask OPTIONMODE_DEFAULTS AUTO_MSGOUT_DE + dont_generate_debug_code } /* @@ -1876,6 +1940,7 @@ register CLRSINT0 { field CLROVERRUN 0x04 field CLRSPIORDY 0x02 field CLRARBDO 0x01 + dont_generate_debug_code } /* @@ -1929,6 +1994,7 @@ register CLRSINT1 { field CLRSCSIPERR 0x04 field CLRSTRB2FAST 0x02 field CLRREQINIT 0x01 + dont_generate_debug_code } /* @@ -1962,6 +2028,7 @@ register CLRSINT2 { field CLRWIDE_RES 0x04 /* Modes 0 and 1 only */ field CLRSDONE 0x02 /* Modes 0 and 1 only */ field CLRDMADONE 0x01 /* Modes 0 and 1 only */ + dont_generate_debug_code } /* @@ -2002,6 +2069,7 @@ register LQISTATE { access_mode RO modes M_CFG count 6 + dont_generate_debug_code } /* @@ -2022,6 +2090,7 @@ register LQOSTATE { access_mode RO modes M_CFG count 2 + dont_generate_debug_code } /* @@ -2054,6 +2123,7 @@ register CLRLQIINT0 { field CLRLQIBADLQT 0x04 field CLRLQIATNLQ 0x02 field CLRLQIATNCMD 0x01 + dont_generate_debug_code } /* @@ -2070,6 +2140,7 @@ register LQIMODE0 { field ENLQIBADLQT 0x04 field ENLQIATNLQ 0x02 field ENLQIATNCMD 0x01 + dont_generate_debug_code } /* @@ -2106,6 +2177,7 @@ register CLRLQIINT1 { field CLRLQIBADLQI 0x04 field CLRLQIOVERI_LQ 0x02 field CLRLQIOVERI_NLQ 0x01 + dont_generate_debug_code } /* @@ -2124,6 +2196,7 @@ register LQIMODE1 { field ENLQIBADLQI 0x04 field ENLQIOVERI_LQ 0x02 /* LQIOVERI1 */ field ENLQIOVERI_NLQ 0x01 /* LQIOVERI2 */ + dont_generate_debug_code } /* @@ -2165,6 +2238,7 @@ register CLRSINT3 { count 3 field CLRNTRAMPERR 0x02 field CLROSRAMPERR 0x01 + dont_generate_debug_code } /* @@ -2177,6 +2251,7 @@ register SIMODE3 { count 4 field ENNTRAMPERR 0x02 field ENOSRAMPERR 0x01 + dont_generate_debug_code } /* @@ -2207,6 +2282,7 @@ register CLRLQOINT0 { field CLRLQOATNLQ 0x04 field CLRLQOATNPKT 0x02 field CLRLQOTCRC 0x01 + dont_generate_debug_code } /* @@ -2222,6 +2298,7 @@ register LQOMODE0 { field ENLQOATNLQ 0x04 field ENLQOATNPKT 0x02 field ENLQOTCRC 0x01 + dont_generate_debug_code } /* @@ -2251,6 +2328,7 @@ register CLRLQOINT1 { field CLRLQOBADQAS 0x04 field CLRLQOBUSFREE 0x02 field CLRLQOPHACHGINPKT 0x01 + dont_generate_debug_code } /* @@ -2266,6 +2344,7 @@ register LQOMODE1 { field ENLQOBADQAS 0x04 field ENLQOBUSFREE 0x02 field ENLQOPHACHGINPKT 0x01 + dont_generate_debug_code } /* @@ -2289,6 +2368,7 @@ register OS_SPACE_CNT { access_mode RO modes M_CFG count 2 + dont_generate_debug_code } /* @@ -2318,6 +2398,7 @@ register GSFIFO { access_mode RO size 2 modes M_DFF0, M_DFF1, M_SCSI + dont_generate_debug_code } /* @@ -2341,6 +2422,7 @@ register NEXTSCB { access_mode RW size 2 modes M_SCSI + dont_generate_debug_code } /* @@ -2357,6 +2439,7 @@ register LQOSCSCTL { field LQOBUSETDLY 0x40 field LQONOHOLDLACK 0x02 field LQONOCHKOVER 0x01 + dont_generate_debug_code } /* @@ -2389,6 +2472,7 @@ register CLRSEQINTSRC { field CLRCFG4TSTAT 0x04 field CLRCFG4ICMD 0x02 field CLRCFG4TCMD 0x01 + dont_generate_debug_code } /* @@ -2415,6 +2499,7 @@ register CURRSCB { access_mode RW size 2 modes M_SCSI + dont_generate_debug_code } /* @@ -2472,6 +2557,7 @@ register LASTSCB { access_mode RW size 2 modes M_SCSI + dont_generate_debug_code } /* @@ -2494,6 +2580,7 @@ register SHADDR { access_mode RO size 8 modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -2513,6 +2600,7 @@ register NEGOADDR { address 0x060 access_mode RW modes M_SCSI + dont_generate_debug_code } /* @@ -2523,6 +2611,7 @@ register NEGPERIOD { access_mode RW modes M_SCSI count 1 + dont_generate_debug_code } /* @@ -2543,6 +2632,7 @@ register NEGOFFSET { access_mode RW modes M_SCSI count 1 + dont_generate_debug_code } /* @@ -2557,6 +2647,7 @@ register NEGPPROPTS { field PPROPT_QAS 0x04 field PPROPT_DT 0x02 field PPROPT_IUT 0x01 + dont_generate_debug_code } /* @@ -2573,6 +2664,7 @@ register NEGCONOPTS { field ENAUTOATNI 0x04 field ENAUTOATNO 0x02 field WIDEXFER 0x01 + dont_generate_debug_code } /* @@ -2583,6 +2675,7 @@ register ANNEXCOL { access_mode RW modes M_SCSI count 7 + dont_generate_debug_code } /* @@ -2602,6 +2695,7 @@ register SCSCHKN { field DFFACTCLR 0x04 field SHVALIDSTDIS 0x02 field LSTSGCLRDIS 0x01 + dont_generate_debug_code } const AHD_ANNEXCOL_PER_DEV0 4 @@ -2635,6 +2729,7 @@ register ANNEXDAT { access_mode RW modes M_SCSI count 3 + dont_generate_debug_code } /* @@ -2645,6 +2740,7 @@ register IOWNID { address 0x067 access_mode RW modes M_SCSI + dont_generate_debug_code } /* @@ -2671,6 +2767,7 @@ register TOWNID { access_mode RW modes M_SCSI count 2 + dont_generate_debug_code } /* @@ -2702,6 +2799,7 @@ register SHCNT { access_mode RW size 3 modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -2789,6 +2887,7 @@ register SCBPTR { access_mode RW size 2 modes M_DFF0, M_DFF1, M_CCHAN, M_SCSI + dont_generate_debug_code } /* @@ -2816,6 +2915,7 @@ register SCBAUTOPTR { field AUSCBPTR_EN 0x80 field SCBPTR_ADDR 0x38 field SCBPTR_OFF 0x07 + dont_generate_debug_code } /* @@ -2825,6 +2925,7 @@ register CCSGADDR { address 0x0AC access_mode RW modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -2834,6 +2935,7 @@ register CCSCBADDR { address 0x0AC access_mode RW modes M_CCHAN + dont_generate_debug_code } /* @@ -2899,6 +3001,7 @@ register CCSGRAM { address 0x0B0 access_mode RW modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -2908,6 +3011,7 @@ register CCSCBRAM { address 0x0B0 access_mode RW modes M_CCHAN + dont_generate_debug_code } /* @@ -2958,6 +3062,7 @@ register BRDDAT { access_mode RW modes M_SCSI count 2 + dont_generate_debug_code } /* @@ -2974,6 +3079,7 @@ register BRDCTL { field BRDEN 0x04 field BRDRW 0x02 field BRDSTB 0x01 + dont_generate_debug_code } /* @@ -2984,6 +3090,7 @@ register SEEADR { access_mode RW modes M_SCSI count 4 + dont_generate_debug_code } /* @@ -2995,6 +3102,7 @@ register SEEDAT { size 2 modes M_SCSI count 4 + dont_generate_debug_code } /* @@ -3011,6 +3119,7 @@ register SEESTAT { field SEEARBACK 0x04 field SEEBUSY 0x02 field SEESTART 0x01 + dont_generate_debug_code } /* @@ -3036,6 +3145,7 @@ register SEECTL { mask SEEOP_EWDS 0x40 field SEERST 0x02 field SEESTART 0x01 + dont_generate_debug_code } const SEEOP_ERAL_ADDR 0x80 @@ -3050,6 +3160,7 @@ register SCBCNT { address 0x0BF access_mode RW modes M_SCSI + dont_generate_debug_code } /* @@ -3061,6 +3172,7 @@ register DFWADDR { access_mode RW size 2 modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -3087,6 +3199,7 @@ register DSPDATACTL { field DESQDIS 0x10 field RCVROFFSTDIS 0x04 field XMITOFFSTDIS 0x02 + dont_generate_debug_code } /* @@ -3132,6 +3245,7 @@ register DFDAT { address 0x0C4 access_mode RW modes M_DFF0, M_DFF1 + dont_generate_debug_code } /* @@ -3144,6 +3258,7 @@ register DSPSELECT { count 1 field AUTOINCEN 0x80 field DSPSEL 0x1F + dont_generate_debug_code } const NUMDSPS 0x14 @@ -3158,6 +3273,7 @@ register WRTBIASCTL { count 3 field AUTOXBCDIS 0x80 field XMITMANVAL 0x3F + dont_generate_debug_code } /* @@ -3316,6 +3432,7 @@ register FLAGS { count 23 field ZERO 0x02 field CARRY 0x01 + dont_generate_debug_code } /* @@ -3344,6 +3461,7 @@ register SEQRAM { address 0x0DA access_mode RW count 2 + dont_generate_debug_code } /* @@ -3355,6 +3473,7 @@ register PRGMCNT { access_mode RW size 2 count 5 + dont_generate_debug_code } /* @@ -3364,6 +3483,7 @@ register ACCUM { address 0x0E0 access_mode RW accumulator + dont_generate_debug_code } /* @@ -3380,6 +3500,7 @@ register SINDEX { access_mode RW size 2 sindex + dont_generate_debug_code } /* @@ -3390,6 +3511,7 @@ register DINDEX { address 0x0E4 access_mode RW size 2 + dont_generate_debug_code } /* @@ -3415,6 +3537,7 @@ register ALLONES { address 0x0E8 access_mode RO allones + dont_generate_debug_code } /* @@ -3425,6 +3548,7 @@ register ALLZEROS { address 0x0EA access_mode RO allzeros + dont_generate_debug_code } /* @@ -3435,6 +3559,7 @@ register NONE { address 0x0EA access_mode WO none + dont_generate_debug_code } /* @@ -3445,6 +3570,7 @@ register NONE { register SINDIR { address 0x0EC access_mode RO + dont_generate_debug_code } /* @@ -3455,6 +3581,7 @@ register SINDIR { register DINDIR { address 0x0ED access_mode WO + dont_generate_debug_code } /* @@ -3479,6 +3606,7 @@ register FUNCTION1 { register STACK { address 0x0F2 access_mode RW + dont_generate_debug_code } /* @@ -3491,6 +3619,7 @@ register INTVEC1_ADDR { size 2 modes M_CFG count 1 + dont_generate_debug_code } /* @@ -3503,6 +3632,7 @@ register CURADDR { size 2 modes M_SCSI count 2 + dont_generate_debug_code } /* @@ -3515,6 +3645,7 @@ register INTVEC2_ADDR { size 2 modes M_CFG count 1 + dont_generate_debug_code } /* @@ -3543,12 +3674,14 @@ scratch_ram { modes 0, 1, 2, 3 REG0 { size 2 + dont_generate_debug_code } REG1 { size 2 } REG_ISR { size 2 + dont_generate_debug_code } SG_STATE { size 1 @@ -3572,9 +3705,11 @@ scratch_ram { modes 0, 1, 2, 3 LONGJMP_ADDR { size 2 + dont_generate_debug_code } ACCUM_SAVE { size 1 + dont_generate_debug_code } } @@ -3591,18 +3726,22 @@ scratch_ram { */ WAITING_SCB_TAILS { size 32 + dont_generate_debug_code } WAITING_TID_HEAD { size 2 + dont_generate_debug_code } WAITING_TID_TAIL { size 2 + dont_generate_debug_code } /* * SCBID of the next SCB in the new SCB queue. */ NEXT_QUEUED_SCB_ADDR { size 4 + dont_generate_debug_code } /* * head of list of SCBs that have @@ -3611,6 +3750,7 @@ scratch_ram { */ COMPLETE_SCB_HEAD { size 2 + dont_generate_debug_code } /* * The list of completed SCBs in @@ -3618,6 +3758,7 @@ scratch_ram { */ COMPLETE_SCB_DMAINPROG_HEAD { size 2 + dont_generate_debug_code } /* * head of list of SCBs that have @@ -3626,6 +3767,7 @@ scratch_ram { */ COMPLETE_DMA_SCB_HEAD { size 2 + dont_generate_debug_code } /* * tail of list of SCBs that have @@ -3634,6 +3776,7 @@ scratch_ram { */ COMPLETE_DMA_SCB_TAIL { size 2 + dont_generate_debug_code } /* * head of list of SCBs that have @@ -3643,6 +3786,7 @@ scratch_ram { */ COMPLETE_ON_QFREEZE_HEAD { size 2 + dont_generate_debug_code } /* * Counting semaphore to prevent new select-outs @@ -3667,6 +3811,7 @@ scratch_ram { */ MSG_OUT { size 1 + dont_generate_debug_code } /* Parameters for DMA Logic */ DMAPARAMS { @@ -3682,6 +3827,7 @@ scratch_ram { field DIRECTION 0x04 /* Set indicates PCI->SCSI */ field FIFOFLUSH 0x02 field FIFORESET 0x01 + dont_generate_debug_code } SEQ_FLAGS { size 1 @@ -3703,9 +3849,11 @@ scratch_ram { */ SAVED_SCSIID { size 1 + dont_generate_debug_code } SAVED_LUN { size 1 + dont_generate_debug_code } /* * The last bus phase as seen by the sequencer. @@ -3733,6 +3881,7 @@ scratch_ram { */ QOUTFIFO_ENTRY_VALID_TAG { size 1 + dont_generate_debug_code } /* * Kernel and sequencer offsets into the queue of @@ -3742,10 +3891,12 @@ scratch_ram { KERNEL_TQINPOS { size 1 count 1 + dont_generate_debug_code } TQINPOS { size 1 count 8 + dont_generate_debug_code } /* * Base address of our shared data with the kernel driver in host @@ -3754,6 +3905,7 @@ scratch_ram { */ SHARED_DATA_ADDR { size 4 + dont_generate_debug_code } /* * Pointer to location in host memory for next @@ -3761,6 +3913,7 @@ scratch_ram { */ QOUTFIFO_NEXT_ADDR { size 4 + dont_generate_debug_code } ARG_1 { size 1 @@ -3773,11 +3926,13 @@ scratch_ram { mask CONT_MSG_LOOP_READ 0x03 mask CONT_MSG_LOOP_TARG 0x02 alias RETURN_1 + dont_generate_debug_code } ARG_2 { size 1 count 1 alias RETURN_2 + dont_generate_debug_code } /* @@ -3785,6 +3940,7 @@ scratch_ram { */ LAST_MSG { size 1 + dont_generate_debug_code } /* @@ -3801,6 +3957,7 @@ scratch_ram { field MANUALP 0x0C field ENAUTOATNP 0x02 field ALTSTIM 0x01 + dont_generate_debug_code } /* @@ -3809,6 +3966,7 @@ scratch_ram { INITIATOR_TAG { size 1 count 1 + dont_generate_debug_code } SEQ_FLAGS2 { @@ -3820,6 +3978,7 @@ scratch_ram { ALLOCFIFO_SCBPTR { size 2 + dont_generate_debug_code } /* @@ -3829,6 +3988,7 @@ scratch_ram { */ INT_COALESCING_TIMER { size 2 + dont_generate_debug_code } /* @@ -3838,6 +3998,7 @@ scratch_ram { */ INT_COALESCING_MAXCMDS { size 1 + dont_generate_debug_code } /* @@ -3846,6 +4007,7 @@ scratch_ram { */ INT_COALESCING_MINCMDS { size 1 + dont_generate_debug_code } /* @@ -3853,6 +4015,7 @@ scratch_ram { */ CMDS_PENDING { size 2 + dont_generate_debug_code } /* @@ -3860,6 +4023,7 @@ scratch_ram { */ INT_COALESCING_CMDCOUNT { size 1 + dont_generate_debug_code } /* @@ -3868,6 +4032,7 @@ scratch_ram { */ LOCAL_HS_MAILBOX { size 1 + dont_generate_debug_code } /* * Target-mode CDB type to CDB length table used @@ -3876,6 +4041,7 @@ scratch_ram { CMDSIZE_TABLE { size 8 count 8 + dont_generate_debug_code } /* * When an SCB with the MK_MESSAGE flag is @@ -3908,25 +4074,31 @@ scb { size 4 alias SCB_CDB_STORE alias SCB_HOST_CDB_PTR + dont_generate_debug_code } SCB_RESIDUAL_SGPTR { size 4 field SG_ADDR_MASK 0xf8 /* In the last byte */ field SG_OVERRUN_RESID 0x02 /* In the first byte */ field SG_LIST_NULL 0x01 /* In the first byte */ + dont_generate_debug_code } SCB_SCSI_STATUS { size 1 alias SCB_HOST_CDB_LEN + dont_generate_debug_code } SCB_TARGET_PHASES { size 1 + dont_generate_debug_code } SCB_TARGET_DATA_DIR { size 1 + dont_generate_debug_code } SCB_TARGET_ITAG { size 1 + dont_generate_debug_code } SCB_SENSE_BUSADDR { /* @@ -3936,10 +4108,12 @@ scb { */ size 4 alias SCB_NEXT_COMPLETE + dont_generate_debug_code } SCB_TAG { alias SCB_FIFO_USE_COUNT size 2 + dont_generate_debug_code } SCB_CONTROL { size 1 @@ -3959,6 +4133,7 @@ scb { SCB_LUN { size 1 field LID 0xff + dont_generate_debug_code } SCB_TASK_ATTRIBUTE { size 1 @@ -3967,16 +4142,20 @@ scb { * ignore wide residue message handling. */ field SCB_XFERLEN_ODD 0x01 + dont_generate_debug_code } SCB_CDB_LEN { size 1 field SCB_CDB_LEN_PTR 0x80 /* CDB in host memory */ + dont_generate_debug_code } SCB_TASK_MANAGEMENT { size 1 + dont_generate_debug_code } SCB_DATAPTR { size 8 + dont_generate_debug_code } SCB_DATACNT { /* @@ -3986,22 +4165,27 @@ scb { size 4 field SG_LAST_SEG 0x80 /* In the fourth byte */ field SG_HIGH_ADDR_BITS 0x7F /* In the fourth byte */ + dont_generate_debug_code } SCB_SGPTR { size 4 field SG_STATUS_VALID 0x04 /* In the first byte */ field SG_FULL_RESID 0x02 /* In the first byte */ field SG_LIST_NULL 0x01 /* In the first byte */ + dont_generate_debug_code } SCB_BUSADDR { size 4 + dont_generate_debug_code } SCB_NEXT { alias SCB_NEXT_SCB_BUSADDR size 2 + dont_generate_debug_code } SCB_NEXT2 { size 2 + dont_generate_debug_code } SCB_SPARE { size 8 @@ -4009,6 +4193,7 @@ scb { } SCB_DISCONNECTED_LISTS { size 8 + dont_generate_debug_code } } diff --git a/drivers/scsi/aic7xxx/aic79xx_core.c b/drivers/scsi/aic7xxx/aic79xx_core.c index 55508b0fcec4..bdad54ec088c 100644 --- a/drivers/scsi/aic7xxx/aic79xx_core.c +++ b/drivers/scsi/aic7xxx/aic79xx_core.c @@ -2472,8 +2472,6 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) if ((ahd->bugs & AHD_CLRLQO_AUTOCLR_BUG) != 0) ahd_outb(ahd, CLRLQOINT1, 0); } else if ((status & SELTO) != 0) { - u_int scbid; - /* Stop the selection */ ahd_outb(ahd, SCSISEQ0, 0); @@ -2583,9 +2581,6 @@ ahd_handle_scsiint(struct ahd_softc *ahd, u_int intstat) case BUSFREE_DFF0: case BUSFREE_DFF1: { - u_int scbid; - struct scb *scb; - mode = busfreetime == BUSFREE_DFF0 ? AHD_MODE_DFF0 : AHD_MODE_DFF1; ahd_set_modes(ahd, mode, mode); @@ -3689,7 +3684,7 @@ ahd_free_tstate(struct ahd_softc *ahd, u_int scsi_id, char channel, int force) * by the capabilities of the bus connectivity of and sync settings for * the target. */ -void +static void ahd_devlimited_syncrate(struct ahd_softc *ahd, struct ahd_initiator_tinfo *tinfo, u_int *period, u_int *ppr_options, role_t role) @@ -4136,7 +4131,7 @@ ahd_update_neg_table(struct ahd_softc *ahd, struct ahd_devinfo *devinfo, /* * Harpoon2A assumed that there would be a - * fallback rate between 160MHz and 80Mhz, + * fallback rate between 160MHz and 80MHz, * so 7 is used as the period factor rather * than 8 for 160MHz. */ @@ -8708,7 +8703,7 @@ ahd_reset_current_bus(struct ahd_softc *ahd) int ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) { - struct ahd_devinfo devinfo; + struct ahd_devinfo caminfo; u_int initiator; u_int target; u_int max_scsiid; @@ -8729,7 +8724,7 @@ ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) ahd->pending_device = NULL; - ahd_compile_devinfo(&devinfo, + ahd_compile_devinfo(&caminfo, CAM_TARGET_WILDCARD, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD, @@ -8868,7 +8863,7 @@ ahd_reset_channel(struct ahd_softc *ahd, char channel, int initiate_reset) } /* Notify the XPT that a bus reset occurred */ - ahd_send_async(ahd, devinfo.channel, CAM_TARGET_WILDCARD, + ahd_send_async(ahd, caminfo.channel, CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD, AC_BUS_RESET); ahd_restart(ahd); diff --git a/drivers/scsi/aic7xxx/aic79xx_pci.c b/drivers/scsi/aic7xxx/aic79xx_pci.c index c25b6adffbf9..a734d77e880e 100644 --- a/drivers/scsi/aic7xxx/aic79xx_pci.c +++ b/drivers/scsi/aic7xxx/aic79xx_pci.c @@ -223,10 +223,10 @@ static const char *pci_bus_modes[] = "PCI bus mode unknown", "PCI bus mode unknown", "PCI bus mode unknown", - "PCI-X 101-133Mhz", - "PCI-X 67-100Mhz", - "PCI-X 50-66Mhz", - "PCI 33 or 66Mhz" + "PCI-X 101-133MHz", + "PCI-X 67-100MHz", + "PCI-X 50-66MHz", + "PCI 33 or 66MHz" }; #define TESTMODE 0x00000800ul @@ -337,8 +337,6 @@ ahd_pci_config(struct ahd_softc *ahd, const struct ahd_pci_identity *entry) * 64bit bus (PCI64BIT set in devconfig). */ if ((ahd->flags & (AHD_39BIT_ADDRESSING|AHD_64BIT_ADDRESSING)) != 0) { - uint32_t devconfig; - if (bootverbose) printf("%s: Enabling 39Bit Addressing\n", ahd_name(ahd)); @@ -483,8 +481,6 @@ ahd_pci_test_register_access(struct ahd_softc *ahd) goto fail; if ((ahd_inb(ahd, INTSTAT) & PCIINT) != 0) { - u_int targpcistat; - ahd_set_modes(ahd, AHD_MODE_CFG, AHD_MODE_CFG); targpcistat = ahd_inb(ahd, TARGPCISTAT); if ((targpcistat & STA) != 0) diff --git a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped index c21ceab8e913..cdcead071ef6 100644 --- a/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped +++ b/drivers/scsi/aic7xxx/aic79xx_reg.h_shipped @@ -34,13 +34,6 @@ ahd_reg_print_t ahd_seqintcode_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_clrint_print; -#else -#define ahd_clrint_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "CLRINT", 0x03, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_error_print; #else #define ahd_error_print(regvalue, cur_col, wrap) \ @@ -48,20 +41,6 @@ ahd_reg_print_t ahd_error_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_hcntrl_print; -#else -#define ahd_hcntrl_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "HCNTRL", 0x05, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_hnscb_qoff_print; -#else -#define ahd_hnscb_qoff_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "HNSCB_QOFF", 0x06, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_hescb_qoff_print; #else #define ahd_hescb_qoff_print(regvalue, cur_col, wrap) \ @@ -97,13 +76,6 @@ ahd_reg_print_t ahd_swtimer_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_snscb_qoff_print; -#else -#define ahd_snscb_qoff_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SNSCB_QOFF", 0x10, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_sescb_qoff_print; #else #define ahd_sescb_qoff_print(regvalue, cur_col, wrap) \ @@ -111,20 +83,6 @@ ahd_reg_print_t ahd_sescb_qoff_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_sdscb_qoff_print; -#else -#define ahd_sdscb_qoff_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SDSCB_QOFF", 0x14, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_qoff_ctlsta_print; -#else -#define ahd_qoff_ctlsta_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "QOFF_CTLSTA", 0x16, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_intctl_print; #else #define ahd_intctl_print(regvalue, cur_col, wrap) \ @@ -139,13 +97,6 @@ ahd_reg_print_t ahd_dfcntrl_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_dscommand0_print; -#else -#define ahd_dscommand0_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "DSCOMMAND0", 0x19, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_dfstatus_print; #else #define ahd_dfstatus_print(regvalue, cur_col, wrap) \ @@ -160,13 +111,6 @@ ahd_reg_print_t ahd_sg_cache_shadow_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_sg_cache_pre_print; -#else -#define ahd_sg_cache_pre_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SG_CACHE_PRE", 0x1b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_lqin_print; #else #define ahd_lqin_print(regvalue, cur_col, wrap) \ @@ -293,13 +237,6 @@ ahd_reg_print_t ahd_sxfrctl0_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_sxfrctl1_print; -#else -#define ahd_sxfrctl1_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SXFRCTL1", 0x3d, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_dffstat_print; #else #define ahd_dffstat_print(regvalue, cur_col, wrap) \ @@ -314,13 +251,6 @@ ahd_reg_print_t ahd_multargid_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_scsisigo_print; -#else -#define ahd_scsisigo_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SCSISIGO", 0x40, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_scsisigi_print; #else #define ahd_scsisigi_print(regvalue, cur_col, wrap) \ @@ -363,13 +293,6 @@ ahd_reg_print_t ahd_selid_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_optionmode_print; -#else -#define ahd_optionmode_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "OPTIONMODE", 0x4a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_sblkctl_print; #else #define ahd_sblkctl_print(regvalue, cur_col, wrap) \ @@ -391,13 +314,6 @@ ahd_reg_print_t ahd_simode0_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_clrsint0_print; -#else -#define ahd_clrsint0_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "CLRSINT0", 0x4b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_sstat1_print; #else #define ahd_sstat1_print(regvalue, cur_col, wrap) \ @@ -405,13 +321,6 @@ ahd_reg_print_t ahd_sstat1_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_clrsint1_print; -#else -#define ahd_clrsint1_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "CLRSINT1", 0x4c, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_sstat2_print; #else #define ahd_sstat2_print(regvalue, cur_col, wrap) \ @@ -461,17 +370,17 @@ ahd_reg_print_t ahd_lqistat0_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_lqimode0_print; +ahd_reg_print_t ahd_clrlqiint0_print; #else -#define ahd_lqimode0_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "LQIMODE0", 0x50, regvalue, cur_col, wrap) +#define ahd_clrlqiint0_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "CLRLQIINT0", 0x50, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_clrlqiint0_print; +ahd_reg_print_t ahd_lqimode0_print; #else -#define ahd_clrlqiint0_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "CLRLQIINT0", 0x50, regvalue, cur_col, wrap) +#define ahd_lqimode0_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "LQIMODE0", 0x50, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS @@ -629,17 +538,17 @@ ahd_reg_print_t ahd_seqintsrc_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_seqimode_print; +ahd_reg_print_t ahd_currscb_print; #else -#define ahd_seqimode_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SEQIMODE", 0x5c, regvalue, cur_col, wrap) +#define ahd_currscb_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "CURRSCB", 0x5c, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_currscb_print; +ahd_reg_print_t ahd_seqimode_print; #else -#define ahd_currscb_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "CURRSCB", 0x5c, regvalue, cur_col, wrap) +#define ahd_seqimode_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "SEQIMODE", 0x5c, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS @@ -657,13 +566,6 @@ ahd_reg_print_t ahd_lastscb_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_shaddr_print; -#else -#define ahd_shaddr_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SHADDR", 0x60, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_negoaddr_print; #else #define ahd_negoaddr_print(regvalue, cur_col, wrap) \ @@ -748,27 +650,6 @@ ahd_reg_print_t ahd_seloid_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_haddr_print; -#else -#define ahd_haddr_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "HADDR", 0x70, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_hcnt_print; -#else -#define ahd_hcnt_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "HCNT", 0x78, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_sghaddr_print; -#else -#define ahd_sghaddr_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SGHADDR", 0x7c, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_scbhaddr_print; #else #define ahd_scbhaddr_print(regvalue, cur_col, wrap) \ @@ -776,10 +657,10 @@ ahd_reg_print_t ahd_scbhaddr_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_sghcnt_print; +ahd_reg_print_t ahd_sghaddr_print; #else -#define ahd_sghcnt_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SGHCNT", 0x84, regvalue, cur_col, wrap) +#define ahd_sghaddr_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "SGHADDR", 0x7c, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS @@ -790,10 +671,10 @@ ahd_reg_print_t ahd_scbhcnt_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_dff_thrsh_print; +ahd_reg_print_t ahd_sghcnt_print; #else -#define ahd_dff_thrsh_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "DFF_THRSH", 0x88, regvalue, cur_col, wrap) +#define ahd_sghcnt_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "SGHCNT", 0x84, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS @@ -867,13 +748,6 @@ ahd_reg_print_t ahd_targpcistat_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_scbptr_print; -#else -#define ahd_scbptr_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SCBPTR", 0xa8, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_scbautoptr_print; #else #define ahd_scbautoptr_print(regvalue, cur_col, wrap) \ @@ -881,13 +755,6 @@ ahd_reg_print_t ahd_scbautoptr_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_ccsgaddr_print; -#else -#define ahd_ccsgaddr_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "CCSGADDR", 0xac, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_ccscbaddr_print; #else #define ahd_ccscbaddr_print(regvalue, cur_col, wrap) \ @@ -909,13 +776,6 @@ ahd_reg_print_t ahd_ccsgctl_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_ccsgram_print; -#else -#define ahd_ccsgram_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "CCSGRAM", 0xb0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_ccscbram_print; #else #define ahd_ccscbram_print(regvalue, cur_col, wrap) \ @@ -930,13 +790,6 @@ ahd_reg_print_t ahd_brddat_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_brdctl_print; -#else -#define ahd_brdctl_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "BRDCTL", 0xb9, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_seeadr_print; #else #define ahd_seeadr_print(regvalue, cur_col, wrap) \ @@ -972,13 +825,6 @@ ahd_reg_print_t ahd_dspdatactl_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_dfdat_print; -#else -#define ahd_dfdat_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "DFDAT", 0xc4, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_dspselect_print; #else #define ahd_dspselect_print(regvalue, cur_col, wrap) \ @@ -1000,13 +846,6 @@ ahd_reg_print_t ahd_seqctl0_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_flags_print; -#else -#define ahd_flags_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "FLAGS", 0xd8, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_seqintctl_print; #else #define ahd_seqintctl_print(regvalue, cur_col, wrap) \ @@ -1014,13 +853,6 @@ ahd_reg_print_t ahd_seqintctl_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_seqram_print; -#else -#define ahd_seqram_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SEQRAM", 0xda, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_prgmcnt_print; #else #define ahd_prgmcnt_print(regvalue, cur_col, wrap) \ @@ -1028,41 +860,6 @@ ahd_reg_print_t ahd_prgmcnt_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_accum_print; -#else -#define ahd_accum_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "ACCUM", 0xe0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_sindex_print; -#else -#define ahd_sindex_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SINDEX", 0xe2, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_dindex_print; -#else -#define ahd_dindex_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "DINDEX", 0xe4, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_allones_print; -#else -#define ahd_allones_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "ALLONES", 0xe8, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_allzeros_print; -#else -#define ahd_allzeros_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "ALLZEROS", 0xea, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_none_print; #else #define ahd_none_print(regvalue, cur_col, wrap) \ @@ -1070,27 +867,6 @@ ahd_reg_print_t ahd_none_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_sindir_print; -#else -#define ahd_sindir_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SINDIR", 0xec, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_dindir_print; -#else -#define ahd_dindir_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "DINDIR", 0xed, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_stack_print; -#else -#define ahd_stack_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "STACK", 0xf2, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_intvec1_addr_print; #else #define ahd_intvec1_addr_print(regvalue, cur_col, wrap) \ @@ -1126,17 +902,17 @@ ahd_reg_print_t ahd_accum_save_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_sram_base_print; +ahd_reg_print_t ahd_waiting_scb_tails_print; #else -#define ahd_sram_base_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SRAM_BASE", 0x100, regvalue, cur_col, wrap) +#define ahd_waiting_scb_tails_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "WAITING_SCB_TAILS", 0x100, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_waiting_scb_tails_print; +ahd_reg_print_t ahd_sram_base_print; #else -#define ahd_waiting_scb_tails_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "WAITING_SCB_TAILS", 0x100, regvalue, cur_col, wrap) +#define ahd_sram_base_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "SRAM_BASE", 0x100, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS @@ -1224,13 +1000,6 @@ ahd_reg_print_t ahd_msg_out_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_dmaparams_print; -#else -#define ahd_dmaparams_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "DMAPARAMS", 0x138, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_seq_flags_print; #else #define ahd_seq_flags_print(regvalue, cur_col, wrap) \ @@ -1238,20 +1007,6 @@ ahd_reg_print_t ahd_seq_flags_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_saved_scsiid_print; -#else -#define ahd_saved_scsiid_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SAVED_SCSIID", 0x13a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_saved_lun_print; -#else -#define ahd_saved_lun_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SAVED_LUN", 0x13b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_lastphase_print; #else #define ahd_lastphase_print(regvalue, cur_col, wrap) \ @@ -1273,20 +1028,6 @@ ahd_reg_print_t ahd_kernel_tqinpos_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_tqinpos_print; -#else -#define ahd_tqinpos_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "TQINPOS", 0x13f, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_shared_data_addr_print; -#else -#define ahd_shared_data_addr_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SHARED_DATA_ADDR", 0x140, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_qoutfifo_next_addr_print; #else #define ahd_qoutfifo_next_addr_print(regvalue, cur_col, wrap) \ @@ -1294,20 +1035,6 @@ ahd_reg_print_t ahd_qoutfifo_next_addr_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_arg_1_print; -#else -#define ahd_arg_1_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "ARG_1", 0x148, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_arg_2_print; -#else -#define ahd_arg_2_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "ARG_2", 0x149, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_last_msg_print; #else #define ahd_last_msg_print(regvalue, cur_col, wrap) \ @@ -1406,13 +1133,6 @@ ahd_reg_print_t ahd_mk_message_scsiid_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_scb_residual_datacnt_print; -#else -#define ahd_scb_residual_datacnt_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SCB_RESIDUAL_DATACNT", 0x180, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_scb_base_print; #else #define ahd_scb_base_print(regvalue, cur_col, wrap) \ @@ -1420,17 +1140,10 @@ ahd_reg_print_t ahd_scb_base_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_scb_residual_sgptr_print; -#else -#define ahd_scb_residual_sgptr_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SCB_RESIDUAL_SGPTR", 0x184, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_scb_scsi_status_print; +ahd_reg_print_t ahd_scb_residual_datacnt_print; #else -#define ahd_scb_scsi_status_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SCB_SCSI_STATUS", 0x188, regvalue, cur_col, wrap) +#define ahd_scb_residual_datacnt_print(regvalue, cur_col, wrap) \ + ahd_print_register(NULL, 0, "SCB_RESIDUAL_DATACNT", 0x180, regvalue, cur_col, wrap) #endif #if AIC_DEBUG_REGISTERS @@ -1476,13 +1189,6 @@ ahd_reg_print_t ahd_scb_task_attribute_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_scb_cdb_len_print; -#else -#define ahd_scb_cdb_len_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SCB_CDB_LEN", 0x196, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_scb_task_management_print; #else #define ahd_scb_task_management_print(regvalue, cur_col, wrap) \ @@ -1518,13 +1224,6 @@ ahd_reg_print_t ahd_scb_busaddr_print; #endif #if AIC_DEBUG_REGISTERS -ahd_reg_print_t ahd_scb_next_print; -#else -#define ahd_scb_next_print(regvalue, cur_col, wrap) \ - ahd_print_register(NULL, 0, "SCB_NEXT", 0x1ac, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahd_reg_print_t ahd_scb_next2_print; #else #define ahd_scb_next2_print(regvalue, cur_col, wrap) \ @@ -1717,10 +1416,10 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define SG_CACHE_PRE 0x1b -#define TYPEPTR 0x20 - #define LQIN 0x20 +#define TYPEPTR 0x20 + #define TAGPTR 0x21 #define LUNPTR 0x22 @@ -1780,6 +1479,14 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define SINGLECMD 0x02 #define ABORTPENDING 0x01 +#define SCSBIST0 0x39 +#define GSBISTERR 0x40 +#define GSBISTDONE 0x20 +#define GSBISTRUN 0x10 +#define OSBISTERR 0x04 +#define OSBISTDONE 0x02 +#define OSBISTRUN 0x01 + #define LQCTL2 0x39 #define LQIRETRY 0x80 #define LQICONTINUE 0x40 @@ -1790,13 +1497,10 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define LQOTOIDLE 0x02 #define LQOPAUSE 0x01 -#define SCSBIST0 0x39 -#define GSBISTERR 0x40 -#define GSBISTDONE 0x20 -#define GSBISTRUN 0x10 -#define OSBISTERR 0x04 -#define OSBISTDONE 0x02 -#define OSBISTRUN 0x01 +#define SCSBIST1 0x3a +#define NTBISTERR 0x04 +#define NTBISTDONE 0x02 +#define NTBISTRUN 0x01 #define SCSISEQ0 0x3a #define TEMODEO 0x80 @@ -1805,15 +1509,8 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define FORCEBUSFREE 0x10 #define SCSIRSTO 0x01 -#define SCSBIST1 0x3a -#define NTBISTERR 0x04 -#define NTBISTDONE 0x02 -#define NTBISTRUN 0x01 - #define SCSISEQ1 0x3b -#define BUSINITID 0x3c - #define SXFRCTL0 0x3c #define DFON 0x80 #define DFPEXP 0x40 @@ -1822,6 +1519,8 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define DLCOUNT 0x3c +#define BUSINITID 0x3c + #define SXFRCTL1 0x3d #define BITBUCKET 0x80 #define ENSACHK 0x40 @@ -1846,8 +1545,6 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define CURRFIFO_1 0x01 #define CURRFIFO_0 0x00 -#define MULTARGID 0x40 - #define SCSISIGO 0x40 #define CDO 0x80 #define IOO 0x40 @@ -1858,6 +1555,8 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define REQO 0x02 #define ACKO 0x01 +#define MULTARGID 0x40 + #define SCSISIGI 0x41 #define ATNI 0x10 #define SELI 0x08 @@ -1904,6 +1603,15 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define ENAB20 0x04 #define SELWIDE 0x02 +#define CLRSINT0 0x4b +#define CLRSELDO 0x40 +#define CLRSELDI 0x20 +#define CLRSELINGO 0x10 +#define CLRIOERR 0x08 +#define CLROVERRUN 0x04 +#define CLRSPIORDY 0x02 +#define CLRARBDO 0x01 + #define SSTAT0 0x4b #define TARGET 0x80 #define SELDO 0x40 @@ -1923,14 +1631,14 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define ENSPIORDY 0x02 #define ENARBDO 0x01 -#define CLRSINT0 0x4b -#define CLRSELDO 0x40 -#define CLRSELDI 0x20 -#define CLRSELINGO 0x10 -#define CLRIOERR 0x08 -#define CLROVERRUN 0x04 -#define CLRSPIORDY 0x02 -#define CLRARBDO 0x01 +#define CLRSINT1 0x4c +#define CLRSELTIMEO 0x80 +#define CLRATNO 0x40 +#define CLRSCSIRSTI 0x20 +#define CLRBUSFREE 0x08 +#define CLRSCSIPERR 0x04 +#define CLRSTRB2FAST 0x02 +#define CLRREQINIT 0x01 #define SSTAT1 0x4c #define SELTO 0x80 @@ -1942,15 +1650,6 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define STRB2FAST 0x02 #define REQINIT 0x01 -#define CLRSINT1 0x4c -#define CLRSELTIMEO 0x80 -#define CLRATNO 0x40 -#define CLRSCSIRSTI 0x20 -#define CLRBUSFREE 0x08 -#define CLRSCSIPERR 0x04 -#define CLRSTRB2FAST 0x02 -#define CLRREQINIT 0x01 - #define SSTAT2 0x4d #define BUSFREETIME 0xc0 #define NONPACKREQ 0x20 @@ -1998,14 +1697,6 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define LQIATNLQ 0x02 #define LQIATNCMD 0x01 -#define LQIMODE0 0x50 -#define ENLQIATNQASK 0x20 -#define ENLQICRCT1 0x10 -#define ENLQICRCT2 0x08 -#define ENLQIBADLQT 0x04 -#define ENLQIATNLQ 0x02 -#define ENLQIATNCMD 0x01 - #define CLRLQIINT0 0x50 #define CLRLQIATNQAS 0x20 #define CLRLQICRCT1 0x10 @@ -2014,6 +1705,14 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define CLRLQIATNLQ 0x02 #define CLRLQIATNCMD 0x01 +#define LQIMODE0 0x50 +#define ENLQIATNQASK 0x20 +#define ENLQICRCT1 0x10 +#define ENLQICRCT2 0x08 +#define ENLQIBADLQT 0x04 +#define ENLQIATNLQ 0x02 +#define ENLQIATNCMD 0x01 + #define LQIMODE1 0x51 #define ENLQIPHASE_LQ 0x80 #define ENLQIPHASE_NLQ 0x40 @@ -2160,6 +1859,8 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define CFG4ICMD 0x02 #define CFG4TCMD 0x01 +#define CURRSCB 0x5c + #define SEQIMODE 0x5c #define ENCTXTDONE 0x40 #define ENSAVEPTRS 0x20 @@ -2169,8 +1870,6 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define ENCFG4ICMD 0x02 #define ENCFG4TCMD 0x01 -#define CURRSCB 0x5c - #define MDFFSTAT 0x5d #define SHCNTNEGATIVE 0x40 #define SHCNTMINUS1 0x20 @@ -2185,29 +1884,29 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define DFFTAG 0x5e +#define LASTSCB 0x5e + #define SCSITEST 0x5e #define CNTRTEST 0x08 #define SEL_TXPLL_DEBUG 0x04 -#define LASTSCB 0x5e - #define IOPDNCTL 0x5f #define DISABLE_OE 0x80 #define PDN_IDIST 0x04 #define PDN_DIFFSENSE 0x01 -#define DGRPCRCI 0x60 - #define SHADDR 0x60 #define NEGOADDR 0x60 -#define NEGPERIOD 0x61 +#define DGRPCRCI 0x60 -#define NEGOFFSET 0x62 +#define NEGPERIOD 0x61 #define PACKCRCI 0x62 +#define NEGOFFSET 0x62 + #define NEGPPROPTS 0x63 #define PPROPT_PACE 0x08 #define PPROPT_QAS 0x04 @@ -2253,8 +1952,6 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define SELOID 0x6b -#define FAIRNESS 0x6c - #define PLL400CTL0 0x6c #define PLL_VCOSEL 0x80 #define PLL_PWDN 0x40 @@ -2264,6 +1961,8 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define PLL_DLPF 0x02 #define PLL_ENFBM 0x01 +#define FAIRNESS 0x6c + #define PLL400CTL1 0x6d #define PLL_CNTEN 0x80 #define PLL_CNTCLR 0x40 @@ -2275,25 +1974,25 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define HADDR 0x70 -#define HODMAADR 0x70 - #define PLLDELAY 0x70 #define SPLIT_DROP_REQ 0x80 -#define HCNT 0x78 +#define HODMAADR 0x70 #define HODMACNT 0x78 -#define HODMAEN 0x7a +#define HCNT 0x78 -#define SGHADDR 0x7c +#define HODMAEN 0x7a #define SCBHADDR 0x7c -#define SGHCNT 0x84 +#define SGHADDR 0x7c #define SCBHCNT 0x84 +#define SGHCNT 0x84 + #define DFF_THRSH 0x88 #define WR_DFTHRSH 0x70 #define RD_DFTHRSH 0x07 @@ -2326,10 +2025,6 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define CMCRXMSG0 0x90 -#define OVLYRXMSG0 0x90 - -#define DCHRXMSG0 0x90 - #define ROENABLE 0x90 #define MSIROEN 0x20 #define OVLYROEN 0x10 @@ -2338,11 +2033,11 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define DCH1ROEN 0x02 #define DCH0ROEN 0x01 -#define OVLYRXMSG1 0x91 +#define OVLYRXMSG0 0x90 -#define CMCRXMSG1 0x91 +#define DCHRXMSG0 0x90 -#define DCHRXMSG1 0x91 +#define OVLYRXMSG1 0x91 #define NSENABLE 0x91 #define MSINSEN 0x20 @@ -2352,6 +2047,10 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define DCH1NSEN 0x02 #define DCH0NSEN 0x01 +#define CMCRXMSG1 0x91 + +#define DCHRXMSG1 0x91 + #define DCHRXMSG2 0x92 #define CMCRXMSG2 0x92 @@ -2375,24 +2074,24 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define TSCSERREN 0x02 #define CMPABCDIS 0x01 -#define CMCSEQBCNT 0x94 - #define OVLYSEQBCNT 0x94 #define DCHSEQBCNT 0x94 +#define CMCSEQBCNT 0x94 + +#define CMCSPLTSTAT0 0x96 + #define DCHSPLTSTAT0 0x96 #define OVLYSPLTSTAT0 0x96 -#define CMCSPLTSTAT0 0x96 +#define CMCSPLTSTAT1 0x97 #define OVLYSPLTSTAT1 0x97 #define DCHSPLTSTAT1 0x97 -#define CMCSPLTSTAT1 0x97 - #define SGRXMSG0 0x98 #define CDNUM 0xf8 #define CFNUM 0x07 @@ -2420,15 +2119,18 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define TAG_NUM 0x1f #define RLXORD 0x10 +#define SGSEQBCNT 0x9c + #define SLVSPLTOUTATTR0 0x9c #define LOWER_BCNT 0xff -#define SGSEQBCNT 0x9c - #define SLVSPLTOUTATTR1 0x9d #define CMPLT_DNUM 0xf8 #define CMPLT_FNUM 0x07 +#define SLVSPLTOUTATTR2 0x9e +#define CMPLT_BNUM 0xff + #define SGSPLTSTAT0 0x9e #define STAETERM 0x80 #define SCBCERR 0x40 @@ -2439,9 +2141,6 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define RXSCEMSG 0x02 #define RXSPLTRSP 0x01 -#define SLVSPLTOUTATTR2 0x9e -#define CMPLT_BNUM 0xff - #define SGSPLTSTAT1 0x9f #define RXDATABUCKET 0x01 @@ -2497,10 +2196,10 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define CCSGADDR 0xac -#define CCSCBADDR 0xac - #define CCSCBADR_BK 0xac +#define CCSCBADDR 0xac + #define CMC_RAMBIST 0xad #define SG_ELEMENT_SIZE 0x80 #define SCBRAMBIST_FAIL 0x40 @@ -2554,9 +2253,9 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define SEEDAT 0xbc #define SEECTL 0xbe -#define SEEOP_EWDS 0x40 #define SEEOP_WALL 0x40 #define SEEOP_EWEN 0x40 +#define SEEOP_EWDS 0x40 #define SEEOPCODE 0x70 #define SEERST 0x02 #define SEESTART 0x01 @@ -2573,25 +2272,25 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define SCBCNT 0xbf +#define DFWADDR 0xc0 + #define DSPFLTRCTL 0xc0 #define FLTRDISABLE 0x20 #define EDGESENSE 0x10 #define DSPFCNTSEL 0x0f -#define DFWADDR 0xc0 - #define DSPDATACTL 0xc1 #define BYPASSENAB 0x80 #define DESQDIS 0x10 #define RCVROFFSTDIS 0x04 #define XMITOFFSTDIS 0x02 +#define DFRADDR 0xc2 + #define DSPREQCTL 0xc2 #define MANREQCTL 0xc0 #define MANREQDLY 0x3f -#define DFRADDR 0xc2 - #define DSPACKCTL 0xc3 #define MANACKCTL 0xc0 #define MANACKDLY 0x3f @@ -2612,14 +2311,14 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define WRTBIASCALC 0xc7 -#define DFPTRS 0xc8 - #define RCVRBIASCALC 0xc8 -#define DFBKPTR 0xc9 +#define DFPTRS 0xc8 #define SKEWCALC 0xc9 +#define DFBKPTR 0xc9 + #define DFDBCTL 0xcb #define DFF_CIO_WR_RDY 0x20 #define DFF_CIO_RD_RDY 0x10 @@ -2704,12 +2403,12 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define ACCUM_SAVE 0xfa +#define WAITING_SCB_TAILS 0x100 + #define AHD_PCI_CONFIG_BASE 0x100 #define SRAM_BASE 0x100 -#define WAITING_SCB_TAILS 0x100 - #define WAITING_TID_HEAD 0x120 #define WAITING_TID_TAIL 0x122 @@ -2738,8 +2437,8 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define PRELOADEN 0x80 #define WIDEODD 0x40 #define SCSIEN 0x20 -#define SDMAENACK 0x10 #define SDMAEN 0x10 +#define SDMAENACK 0x10 #define HDMAEN 0x08 #define HDMAENACK 0x08 #define DIRECTION 0x04 @@ -2837,12 +2536,12 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define MK_MESSAGE_SCSIID 0x162 +#define SCB_BASE 0x180 + #define SCB_RESIDUAL_DATACNT 0x180 #define SCB_CDB_STORE 0x180 #define SCB_HOST_CDB_PTR 0x180 -#define SCB_BASE 0x180 - #define SCB_RESIDUAL_SGPTR 0x184 #define SG_ADDR_MASK 0xf8 #define SG_OVERRUN_RESID 0x02 @@ -2910,17 +2609,6 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define SCB_DISCONNECTED_LISTS 0x1b8 -#define CMD_GROUP_CODE_SHIFT 0x05 -#define STIMESEL_MIN 0x18 -#define STIMESEL_SHIFT 0x03 -#define INVALID_ADDR 0x80 -#define AHD_PRECOMP_MASK 0x07 -#define TARGET_DATA_IN 0x01 -#define CCSCBADDR_MAX 0x80 -#define NUMDSPS 0x14 -#define SEEOP_EWEN_ADDR 0xc0 -#define AHD_ANNEXCOL_PER_DEV0 0x04 -#define DST_MODE_SHIFT 0x04 #define AHD_TIMER_MAX_US 0x18ffe7 #define AHD_TIMER_MAX_TICKS 0xffff #define AHD_SENSE_BUFSIZE 0x100 @@ -2955,32 +2643,43 @@ ahd_reg_print_t ahd_scb_disconnected_lists_print; #define LUNLEN_SINGLE_LEVEL_LUN 0x0f #define NVRAM_SCB_OFFSET 0x2c #define STATUS_PKT_SENSE 0xff +#define CMD_GROUP_CODE_SHIFT 0x05 #define MAX_OFFSET_PACED_BUG 0x7f #define STIMESEL_BUG_ADJ 0x08 +#define STIMESEL_MIN 0x18 +#define STIMESEL_SHIFT 0x03 #define CCSGRAM_MAXSEGS 0x10 +#define INVALID_ADDR 0x80 #define SEEOP_ERAL_ADDR 0x80 #define AHD_SLEWRATE_DEF_REVB 0x08 #define AHD_PRECOMP_CUTBACK_17 0x04 +#define AHD_PRECOMP_MASK 0x07 #define SRC_MODE_SHIFT 0x00 #define PKT_OVERRUN_BUFSIZE 0x200 #define SCB_TRANSFER_SIZE_1BYTE_LUN 0x30 +#define TARGET_DATA_IN 0x01 #define HOST_MSG 0xff #define MAX_OFFSET 0xfe #define BUS_16_BIT 0x01 +#define CCSCBADDR_MAX 0x80 +#define NUMDSPS 0x14 +#define SEEOP_EWEN_ADDR 0xc0 +#define AHD_ANNEXCOL_PER_DEV0 0x04 +#define DST_MODE_SHIFT 0x04 /* Downloaded Constant Definitions */ -#define SG_SIZEOF 0x04 -#define SG_PREFETCH_ALIGN_MASK 0x02 -#define SG_PREFETCH_CNT_LIMIT 0x01 #define CACHELINE_MASK 0x07 #define SCB_TRANSFER_SIZE 0x06 #define PKT_OVERRUN_BUFOFFSET 0x05 +#define SG_SIZEOF 0x04 #define SG_PREFETCH_ADDR_MASK 0x03 +#define SG_PREFETCH_ALIGN_MASK 0x02 +#define SG_PREFETCH_CNT_LIMIT 0x01 #define SG_PREFETCH_CNT 0x00 #define DOWNLOAD_CONST_COUNT 0x08 /* Exported Labels */ -#define LABEL_timer_isr 0x28b #define LABEL_seq_isr 0x28f +#define LABEL_timer_isr 0x28b diff --git a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped index c4c8a96bf5a3..f5ea715d6ac3 100644 --- a/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped +++ b/drivers/scsi/aic7xxx/aic79xx_reg_print.c_shipped @@ -8,18 +8,6 @@ #include "aic79xx_osm.h" -static const ahd_reg_parse_entry_t MODE_PTR_parse_table[] = { - { "SRC_MODE", 0x07, 0x07 }, - { "DST_MODE", 0x70, 0x70 } -}; - -int -ahd_mode_ptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(MODE_PTR_parse_table, 2, "MODE_PTR", - 0x00, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t INTSTAT_parse_table[] = { { "SPLTINT", 0x01, 0x01 }, { "CMDCMPLT", 0x02, 0x02 }, @@ -39,110 +27,6 @@ ahd_intstat_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x01, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t SEQINTCODE_parse_table[] = { - { "NO_SEQINT", 0x00, 0xff }, - { "BAD_PHASE", 0x01, 0xff }, - { "SEND_REJECT", 0x02, 0xff }, - { "PROTO_VIOLATION", 0x03, 0xff }, - { "NO_MATCH", 0x04, 0xff }, - { "IGN_WIDE_RES", 0x05, 0xff }, - { "PDATA_REINIT", 0x06, 0xff }, - { "HOST_MSG_LOOP", 0x07, 0xff }, - { "BAD_STATUS", 0x08, 0xff }, - { "DATA_OVERRUN", 0x09, 0xff }, - { "MKMSG_FAILED", 0x0a, 0xff }, - { "MISSED_BUSFREE", 0x0b, 0xff }, - { "DUMP_CARD_STATE", 0x0c, 0xff }, - { "ILLEGAL_PHASE", 0x0d, 0xff }, - { "INVALID_SEQINT", 0x0e, 0xff }, - { "CFG4ISTAT_INTR", 0x0f, 0xff }, - { "STATUS_OVERRUN", 0x10, 0xff }, - { "CFG4OVERRUN", 0x11, 0xff }, - { "ENTERING_NONPACK", 0x12, 0xff }, - { "TASKMGMT_FUNC_COMPLETE",0x13, 0xff }, - { "TASKMGMT_CMD_CMPLT_OKAY",0x14, 0xff }, - { "TRACEPOINT0", 0x15, 0xff }, - { "TRACEPOINT1", 0x16, 0xff }, - { "TRACEPOINT2", 0x17, 0xff }, - { "TRACEPOINT3", 0x18, 0xff }, - { "SAW_HWERR", 0x19, 0xff }, - { "BAD_SCB_STATUS", 0x1a, 0xff } -}; - -int -ahd_seqintcode_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SEQINTCODE_parse_table, 27, "SEQINTCODE", - 0x02, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t CLRINT_parse_table[] = { - { "CLRSPLTINT", 0x01, 0x01 }, - { "CLRCMDINT", 0x02, 0x02 }, - { "CLRSEQINT", 0x04, 0x04 }, - { "CLRSCSIINT", 0x08, 0x08 }, - { "CLRPCIINT", 0x10, 0x10 }, - { "CLRSWTMINT", 0x20, 0x20 }, - { "CLRBRKADRINT", 0x40, 0x40 }, - { "CLRHWERRINT", 0x80, 0x80 } -}; - -int -ahd_clrint_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRINT_parse_table, 8, "CLRINT", - 0x03, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t ERROR_parse_table[] = { - { "DSCTMOUT", 0x02, 0x02 }, - { "ILLOPCODE", 0x04, 0x04 }, - { "SQPARERR", 0x08, 0x08 }, - { "DPARERR", 0x10, 0x10 }, - { "MPARERR", 0x20, 0x20 }, - { "CIOACCESFAIL", 0x40, 0x40 }, - { "CIOPARERR", 0x80, 0x80 } -}; - -int -ahd_error_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(ERROR_parse_table, 7, "ERROR", - 0x04, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t HCNTRL_parse_table[] = { - { "CHIPRST", 0x01, 0x01 }, - { "CHIPRSTACK", 0x01, 0x01 }, - { "INTEN", 0x02, 0x02 }, - { "PAUSE", 0x04, 0x04 }, - { "SWTIMER_START_B", 0x08, 0x08 }, - { "SWINT", 0x10, 0x10 }, - { "POWRDN", 0x40, 0x40 }, - { "SEQ_RESET", 0x80, 0x80 } -}; - -int -ahd_hcntrl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(HCNTRL_parse_table, 8, "HCNTRL", - 0x05, regvalue, cur_col, wrap)); -} - -int -ahd_hnscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "HNSCB_QOFF", - 0x06, regvalue, cur_col, wrap)); -} - -int -ahd_hescb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "HESCB_QOFF", - 0x08, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t HS_MAILBOX_parse_table[] = { { "ENINT_COALESCE", 0x40, 0x40 }, { "HOST_TQINPOS", 0x80, 0x80 } @@ -170,77 +54,6 @@ ahd_seqintstat_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x0c, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t CLRSEQINTSTAT_parse_table[] = { - { "CLRSEQ_SPLTINT", 0x01, 0x01 }, - { "CLRSEQ_PCIINT", 0x02, 0x02 }, - { "CLRSEQ_SCSIINT", 0x04, 0x04 }, - { "CLRSEQ_SEQINT", 0x08, 0x08 }, - { "CLRSEQ_SWTMRTO", 0x10, 0x10 } -}; - -int -ahd_clrseqintstat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRSEQINTSTAT_parse_table, 5, "CLRSEQINTSTAT", - 0x0c, regvalue, cur_col, wrap)); -} - -int -ahd_swtimer_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SWTIMER", - 0x0e, regvalue, cur_col, wrap)); -} - -int -ahd_snscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SNSCB_QOFF", - 0x10, regvalue, cur_col, wrap)); -} - -int -ahd_sescb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SESCB_QOFF", - 0x12, regvalue, cur_col, wrap)); -} - -int -ahd_sdscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SDSCB_QOFF", - 0x14, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t QOFF_CTLSTA_parse_table[] = { - { "SCB_QSIZE_4", 0x00, 0x0f }, - { "SCB_QSIZE_8", 0x01, 0x0f }, - { "SCB_QSIZE_16", 0x02, 0x0f }, - { "SCB_QSIZE_32", 0x03, 0x0f }, - { "SCB_QSIZE_64", 0x04, 0x0f }, - { "SCB_QSIZE_128", 0x05, 0x0f }, - { "SCB_QSIZE_256", 0x06, 0x0f }, - { "SCB_QSIZE_512", 0x07, 0x0f }, - { "SCB_QSIZE_1024", 0x08, 0x0f }, - { "SCB_QSIZE_2048", 0x09, 0x0f }, - { "SCB_QSIZE_4096", 0x0a, 0x0f }, - { "SCB_QSIZE_8192", 0x0b, 0x0f }, - { "SCB_QSIZE_16384", 0x0c, 0x0f }, - { "SCB_QSIZE", 0x0f, 0x0f }, - { "HS_MAILBOX_ACT", 0x10, 0x10 }, - { "SDSCB_ROLLOVR", 0x20, 0x20 }, - { "NEW_SCB_AVAIL", 0x40, 0x40 }, - { "EMPTY_SCB_AVAIL", 0x80, 0x80 } -}; - -int -ahd_qoff_ctlsta_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(QOFF_CTLSTA_parse_table, 18, "QOFF_CTLSTA", - 0x16, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t INTCTL_parse_table[] = { { "SPLTINTEN", 0x01, 0x01 }, { "SEQINTEN", 0x02, 0x02 }, @@ -280,22 +93,6 @@ ahd_dfcntrl_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x19, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t DSCOMMAND0_parse_table[] = { - { "CIOPARCKEN", 0x01, 0x01 }, - { "DISABLE_TWATE", 0x02, 0x02 }, - { "EXTREQLCK", 0x10, 0x10 }, - { "MPARCKEN", 0x20, 0x20 }, - { "DPARCKEN", 0x40, 0x40 }, - { "CACHETHEN", 0x80, 0x80 } -}; - -int -ahd_dscommand0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(DSCOMMAND0_parse_table, 6, "DSCOMMAND0", - 0x19, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t DFSTATUS_parse_table[] = { { "FIFOEMP", 0x01, 0x01 }, { "FIFOFULL", 0x02, 0x02 }, @@ -327,146 +124,6 @@ ahd_sg_cache_shadow_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x1b, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t SG_CACHE_PRE_parse_table[] = { - { "LAST_SEG", 0x02, 0x02 }, - { "ODD_SEG", 0x04, 0x04 }, - { "SG_ADDR_MASK", 0xf8, 0xf8 } -}; - -int -ahd_sg_cache_pre_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SG_CACHE_PRE_parse_table, 3, "SG_CACHE_PRE", - 0x1b, regvalue, cur_col, wrap)); -} - -int -ahd_lqin_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "LQIN", - 0x20, regvalue, cur_col, wrap)); -} - -int -ahd_lunptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "LUNPTR", - 0x22, regvalue, cur_col, wrap)); -} - -int -ahd_cmdlenptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CMDLENPTR", - 0x25, regvalue, cur_col, wrap)); -} - -int -ahd_attrptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ATTRPTR", - 0x26, regvalue, cur_col, wrap)); -} - -int -ahd_flagptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "FLAGPTR", - 0x27, regvalue, cur_col, wrap)); -} - -int -ahd_cmdptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CMDPTR", - 0x28, regvalue, cur_col, wrap)); -} - -int -ahd_qnextptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "QNEXTPTR", - 0x29, regvalue, cur_col, wrap)); -} - -int -ahd_abrtbyteptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ABRTBYTEPTR", - 0x2b, regvalue, cur_col, wrap)); -} - -int -ahd_abrtbitptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ABRTBITPTR", - 0x2c, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t LUNLEN_parse_table[] = { - { "ILUNLEN", 0x0f, 0x0f }, - { "TLUNLEN", 0xf0, 0xf0 } -}; - -int -ahd_lunlen_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(LUNLEN_parse_table, 2, "LUNLEN", - 0x30, regvalue, cur_col, wrap)); -} - -int -ahd_cdblimit_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CDBLIMIT", - 0x31, regvalue, cur_col, wrap)); -} - -int -ahd_maxcmd_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "MAXCMD", - 0x32, regvalue, cur_col, wrap)); -} - -int -ahd_maxcmdcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "MAXCMDCNT", - 0x33, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t LQCTL1_parse_table[] = { - { "ABORTPENDING", 0x01, 0x01 }, - { "SINGLECMD", 0x02, 0x02 }, - { "PCI2PCI", 0x04, 0x04 } -}; - -int -ahd_lqctl1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(LQCTL1_parse_table, 3, "LQCTL1", - 0x38, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t LQCTL2_parse_table[] = { - { "LQOPAUSE", 0x01, 0x01 }, - { "LQOTOIDLE", 0x02, 0x02 }, - { "LQOCONTINUE", 0x04, 0x04 }, - { "LQORETRY", 0x08, 0x08 }, - { "LQIPAUSE", 0x10, 0x10 }, - { "LQITOIDLE", 0x20, 0x20 }, - { "LQICONTINUE", 0x40, 0x40 }, - { "LQIRETRY", 0x80, 0x80 } -}; - -int -ahd_lqctl2_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(LQCTL2_parse_table, 8, "LQCTL2", - 0x39, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SCSISEQ0_parse_table[] = { { "SCSIRSTO", 0x01, 0x01 }, { "FORCEBUSFREE", 0x10, 0x10 }, @@ -498,37 +155,6 @@ ahd_scsiseq1_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x3b, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t SXFRCTL0_parse_table[] = { - { "SPIOEN", 0x08, 0x08 }, - { "BIOSCANCELEN", 0x10, 0x10 }, - { "DFPEXP", 0x40, 0x40 }, - { "DFON", 0x80, 0x80 } -}; - -int -ahd_sxfrctl0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SXFRCTL0_parse_table, 4, "SXFRCTL0", - 0x3c, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SXFRCTL1_parse_table[] = { - { "STPWEN", 0x01, 0x01 }, - { "ACTNEGEN", 0x02, 0x02 }, - { "ENSTIMER", 0x04, 0x04 }, - { "STIMESEL", 0x18, 0x18 }, - { "ENSPCHK", 0x20, 0x20 }, - { "ENSACHK", 0x40, 0x40 }, - { "BITBUCKET", 0x80, 0x80 } -}; - -int -ahd_sxfrctl1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SXFRCTL1_parse_table, 7, "SXFRCTL1", - 0x3d, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t DFFSTAT_parse_table[] = { { "CURRFIFO_0", 0x00, 0x03 }, { "CURRFIFO_1", 0x01, 0x03 }, @@ -545,40 +171,6 @@ ahd_dffstat_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x3f, regvalue, cur_col, wrap)); } -int -ahd_multargid_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "MULTARGID", - 0x40, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SCSISIGO_parse_table[] = { - { "P_DATAOUT", 0x00, 0xe0 }, - { "P_DATAOUT_DT", 0x20, 0xe0 }, - { "P_DATAIN", 0x40, 0xe0 }, - { "P_DATAIN_DT", 0x60, 0xe0 }, - { "P_COMMAND", 0x80, 0xe0 }, - { "P_MESGOUT", 0xa0, 0xe0 }, - { "P_STATUS", 0xc0, 0xe0 }, - { "P_MESGIN", 0xe0, 0xe0 }, - { "ACKO", 0x01, 0x01 }, - { "REQO", 0x02, 0x02 }, - { "BSYO", 0x04, 0x04 }, - { "SELO", 0x08, 0x08 }, - { "ATNO", 0x10, 0x10 }, - { "MSGO", 0x20, 0x20 }, - { "IOO", 0x40, 0x40 }, - { "CDO", 0x80, 0x80 }, - { "PHASE_MASK", 0xe0, 0xe0 } -}; - -int -ahd_scsisigo_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCSISIGO_parse_table, 17, "SCSISIGO", - 0x40, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SCSISIGI_parse_table[] = { { "P_DATAOUT", 0x00, 0xe0 }, { "P_DATAOUT_DT", 0x20, 0xe0 }, @@ -624,31 +216,12 @@ ahd_scsiphase_print(u_int regvalue, u_int *cur_col, u_int wrap) } int -ahd_scsidat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCSIDAT", - 0x44, regvalue, cur_col, wrap)); -} - -int ahd_scsibus_print(u_int regvalue, u_int *cur_col, u_int wrap) { return (ahd_print_register(NULL, 0, "SCSIBUS", 0x46, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t TARGIDIN_parse_table[] = { - { "TARGID", 0x0f, 0x0f }, - { "CLKOUT", 0x80, 0x80 } -}; - -int -ahd_targidin_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(TARGIDIN_parse_table, 2, "TARGIDIN", - 0x48, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SELID_parse_table[] = { { "ONEBIT", 0x08, 0x08 }, { "SELID_MASK", 0xf0, 0xf0 } @@ -661,38 +234,6 @@ ahd_selid_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x49, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t OPTIONMODE_parse_table[] = { - { "AUTO_MSGOUT_DE", 0x02, 0x02 }, - { "ENDGFORMCHK", 0x04, 0x04 }, - { "BUSFREEREV", 0x10, 0x10 }, - { "BIASCANCTL", 0x20, 0x20 }, - { "AUTOACKEN", 0x40, 0x40 }, - { "BIOSCANCTL", 0x80, 0x80 }, - { "OPTIONMODE_DEFAULTS",0x02, 0x02 } -}; - -int -ahd_optionmode_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(OPTIONMODE_parse_table, 7, "OPTIONMODE", - 0x4a, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SBLKCTL_parse_table[] = { - { "SELWIDE", 0x02, 0x02 }, - { "ENAB20", 0x04, 0x04 }, - { "ENAB40", 0x08, 0x08 }, - { "DIAGLEDON", 0x40, 0x40 }, - { "DIAGLEDEN", 0x80, 0x80 } -}; - -int -ahd_sblkctl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SBLKCTL_parse_table, 5, "SBLKCTL", - 0x4a, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SSTAT0_parse_table[] = { { "ARBDO", 0x01, 0x01 }, { "SPIORDY", 0x02, 0x02 }, @@ -728,23 +269,6 @@ ahd_simode0_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x4b, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t CLRSINT0_parse_table[] = { - { "CLRARBDO", 0x01, 0x01 }, - { "CLRSPIORDY", 0x02, 0x02 }, - { "CLROVERRUN", 0x04, 0x04 }, - { "CLRIOERR", 0x08, 0x08 }, - { "CLRSELINGO", 0x10, 0x10 }, - { "CLRSELDI", 0x20, 0x20 }, - { "CLRSELDO", 0x40, 0x40 } -}; - -int -ahd_clrsint0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRSINT0_parse_table, 7, "CLRSINT0", - 0x4b, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SSTAT1_parse_table[] = { { "REQINIT", 0x01, 0x01 }, { "STRB2FAST", 0x02, 0x02 }, @@ -763,23 +287,6 @@ ahd_sstat1_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x4c, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t CLRSINT1_parse_table[] = { - { "CLRREQINIT", 0x01, 0x01 }, - { "CLRSTRB2FAST", 0x02, 0x02 }, - { "CLRSCSIPERR", 0x04, 0x04 }, - { "CLRBUSFREE", 0x08, 0x08 }, - { "CLRSCSIRSTI", 0x20, 0x20 }, - { "CLRATNO", 0x40, 0x40 }, - { "CLRSELTIMEO", 0x80, 0x80 } -}; - -int -ahd_clrsint1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRSINT1_parse_table, 7, "CLRSINT1", - 0x4c, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SSTAT2_parse_table[] = { { "BUSFREE_LQO", 0x40, 0xc0 }, { "BUSFREE_DFF0", 0x80, 0xc0 }, @@ -800,20 +307,6 @@ ahd_sstat2_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x4d, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t CLRSINT2_parse_table[] = { - { "CLRDMADONE", 0x01, 0x01 }, - { "CLRSDONE", 0x02, 0x02 }, - { "CLRWIDE_RES", 0x04, 0x04 }, - { "CLRNONPACKREQ", 0x20, 0x20 } -}; - -int -ahd_clrsint2_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRSINT2_parse_table, 4, "CLRSINT2", - 0x4d, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t PERRDIAG_parse_table[] = { { "DTERR", 0x01, 0x01 }, { "DGFORMERR", 0x02, 0x02 }, @@ -833,26 +326,12 @@ ahd_perrdiag_print(u_int regvalue, u_int *cur_col, u_int wrap) } int -ahd_lqistate_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "LQISTATE", - 0x4e, regvalue, cur_col, wrap)); -} - -int ahd_soffcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) { return (ahd_print_register(NULL, 0, "SOFFCNT", 0x4f, regvalue, cur_col, wrap)); } -int -ahd_lqostate_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "LQOSTATE", - 0x4f, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t LQISTAT0_parse_table[] = { { "LQIATNCMD", 0x01, 0x01 }, { "LQIATNLQ", 0x02, 0x02 }, @@ -869,56 +348,6 @@ ahd_lqistat0_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x50, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t LQIMODE0_parse_table[] = { - { "ENLQIATNCMD", 0x01, 0x01 }, - { "ENLQIATNLQ", 0x02, 0x02 }, - { "ENLQIBADLQT", 0x04, 0x04 }, - { "ENLQICRCT2", 0x08, 0x08 }, - { "ENLQICRCT1", 0x10, 0x10 }, - { "ENLQIATNQASK", 0x20, 0x20 } -}; - -int -ahd_lqimode0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(LQIMODE0_parse_table, 6, "LQIMODE0", - 0x50, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t CLRLQIINT0_parse_table[] = { - { "CLRLQIATNCMD", 0x01, 0x01 }, - { "CLRLQIATNLQ", 0x02, 0x02 }, - { "CLRLQIBADLQT", 0x04, 0x04 }, - { "CLRLQICRCT2", 0x08, 0x08 }, - { "CLRLQICRCT1", 0x10, 0x10 }, - { "CLRLQIATNQAS", 0x20, 0x20 } -}; - -int -ahd_clrlqiint0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRLQIINT0_parse_table, 6, "CLRLQIINT0", - 0x50, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t LQIMODE1_parse_table[] = { - { "ENLQIOVERI_NLQ", 0x01, 0x01 }, - { "ENLQIOVERI_LQ", 0x02, 0x02 }, - { "ENLQIBADLQI", 0x04, 0x04 }, - { "ENLQICRCI_NLQ", 0x08, 0x08 }, - { "ENLQICRCI_LQ", 0x10, 0x10 }, - { "ENLIQABORT", 0x20, 0x20 }, - { "ENLQIPHASE_NLQ", 0x40, 0x40 }, - { "ENLQIPHASE_LQ", 0x80, 0x80 } -}; - -int -ahd_lqimode1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(LQIMODE1_parse_table, 8, "LQIMODE1", - 0x51, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t LQISTAT1_parse_table[] = { { "LQIOVERI_NLQ", 0x01, 0x01 }, { "LQIOVERI_LQ", 0x02, 0x02 }, @@ -937,24 +366,6 @@ ahd_lqistat1_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x51, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t CLRLQIINT1_parse_table[] = { - { "CLRLQIOVERI_NLQ", 0x01, 0x01 }, - { "CLRLQIOVERI_LQ", 0x02, 0x02 }, - { "CLRLQIBADLQI", 0x04, 0x04 }, - { "CLRLQICRCI_NLQ", 0x08, 0x08 }, - { "CLRLQICRCI_LQ", 0x10, 0x10 }, - { "CLRLIQABORT", 0x20, 0x20 }, - { "CLRLQIPHASE_NLQ", 0x40, 0x40 }, - { "CLRLQIPHASE_LQ", 0x80, 0x80 } -}; - -int -ahd_clrlqiint1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRLQIINT1_parse_table, 8, "CLRLQIINT1", - 0x51, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t LQISTAT2_parse_table[] = { { "LQIGSAVAIL", 0x01, 0x01 }, { "LQISTOPCMD", 0x02, 0x02 }, @@ -985,30 +396,6 @@ ahd_sstat3_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x53, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t SIMODE3_parse_table[] = { - { "ENOSRAMPERR", 0x01, 0x01 }, - { "ENNTRAMPERR", 0x02, 0x02 } -}; - -int -ahd_simode3_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SIMODE3_parse_table, 2, "SIMODE3", - 0x53, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t CLRSINT3_parse_table[] = { - { "CLROSRAMPERR", 0x01, 0x01 }, - { "CLRNTRAMPERR", 0x02, 0x02 } -}; - -int -ahd_clrsint3_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRSINT3_parse_table, 2, "CLRSINT3", - 0x53, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t LQOSTAT0_parse_table[] = { { "LQOTCRC", 0x01, 0x01 }, { "LQOATNPKT", 0x02, 0x02 }, @@ -1024,51 +411,6 @@ ahd_lqostat0_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x54, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t CLRLQOINT0_parse_table[] = { - { "CLRLQOTCRC", 0x01, 0x01 }, - { "CLRLQOATNPKT", 0x02, 0x02 }, - { "CLRLQOATNLQ", 0x04, 0x04 }, - { "CLRLQOSTOPT2", 0x08, 0x08 }, - { "CLRLQOTARGSCBPERR", 0x10, 0x10 } -}; - -int -ahd_clrlqoint0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRLQOINT0_parse_table, 5, "CLRLQOINT0", - 0x54, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t LQOMODE0_parse_table[] = { - { "ENLQOTCRC", 0x01, 0x01 }, - { "ENLQOATNPKT", 0x02, 0x02 }, - { "ENLQOATNLQ", 0x04, 0x04 }, - { "ENLQOSTOPT2", 0x08, 0x08 }, - { "ENLQOTARGSCBPERR", 0x10, 0x10 } -}; - -int -ahd_lqomode0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(LQOMODE0_parse_table, 5, "LQOMODE0", - 0x54, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t LQOMODE1_parse_table[] = { - { "ENLQOPHACHGINPKT", 0x01, 0x01 }, - { "ENLQOBUSFREE", 0x02, 0x02 }, - { "ENLQOBADQAS", 0x04, 0x04 }, - { "ENLQOSTOPI2", 0x08, 0x08 }, - { "ENLQOINITSCBPERR", 0x10, 0x10 } -}; - -int -ahd_lqomode1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(LQOMODE1_parse_table, 5, "LQOMODE1", - 0x55, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t LQOSTAT1_parse_table[] = { { "LQOPHACHGINPKT", 0x01, 0x01 }, { "LQOBUSFREE", 0x02, 0x02 }, @@ -1084,21 +426,6 @@ ahd_lqostat1_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x55, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t CLRLQOINT1_parse_table[] = { - { "CLRLQOPHACHGINPKT", 0x01, 0x01 }, - { "CLRLQOBUSFREE", 0x02, 0x02 }, - { "CLRLQOBADQAS", 0x04, 0x04 }, - { "CLRLQOSTOPI2", 0x08, 0x08 }, - { "CLRLQOINITSCBPERR", 0x10, 0x10 } -}; - -int -ahd_clrlqoint1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRLQOINT1_parse_table, 5, "CLRLQOINT1", - 0x55, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t LQOSTAT2_parse_table[] = { { "LQOSTOP0", 0x01, 0x01 }, { "LQOPHACHGOUTPKT", 0x02, 0x02 }, @@ -1113,13 +440,6 @@ ahd_lqostat2_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x56, regvalue, cur_col, wrap)); } -int -ahd_os_space_cnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "OS_SPACE_CNT", - 0x56, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SIMODE1_parse_table[] = { { "ENREQINIT", 0x01, 0x01 }, { "ENSTRB2FAST", 0x02, 0x02 }, @@ -1138,13 +458,6 @@ ahd_simode1_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x57, regvalue, cur_col, wrap)); } -int -ahd_gsfifo_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "GSFIFO", - 0x58, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t DFFSXFRCTL_parse_table[] = { { "RSTCHN", 0x01, 0x01 }, { "CLRCHN", 0x02, 0x02 }, @@ -1159,44 +472,6 @@ ahd_dffsxfrctl_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x5a, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t LQOSCSCTL_parse_table[] = { - { "LQONOCHKOVER", 0x01, 0x01 }, - { "LQONOHOLDLACK", 0x02, 0x02 }, - { "LQOBUSETDLY", 0x40, 0x40 }, - { "LQOH2A_VERSION", 0x80, 0x80 } -}; - -int -ahd_lqoscsctl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(LQOSCSCTL_parse_table, 4, "LQOSCSCTL", - 0x5a, regvalue, cur_col, wrap)); -} - -int -ahd_nextscb_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "NEXTSCB", - 0x5a, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t CLRSEQINTSRC_parse_table[] = { - { "CLRCFG4TCMD", 0x01, 0x01 }, - { "CLRCFG4ICMD", 0x02, 0x02 }, - { "CLRCFG4TSTAT", 0x04, 0x04 }, - { "CLRCFG4ISTAT", 0x08, 0x08 }, - { "CLRCFG4DATA", 0x10, 0x10 }, - { "CLRSAVEPTRS", 0x20, 0x20 }, - { "CLRCTXTDONE", 0x40, 0x40 } -}; - -int -ahd_clrseqintsrc_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(CLRSEQINTSRC_parse_table, 7, "CLRSEQINTSRC", - 0x5b, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SEQINTSRC_parse_table[] = { { "CFG4TCMD", 0x01, 0x01 }, { "CFG4ICMD", 0x02, 0x02 }, @@ -1231,13 +506,6 @@ ahd_seqimode_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x5c, regvalue, cur_col, wrap)); } -int -ahd_currscb_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CURRSCB", - 0x5c, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t MDFFSTAT_parse_table[] = { { "FIFOFREE", 0x01, 0x01 }, { "DATAINFIFO", 0x02, 0x02 }, @@ -1256,308 +524,12 @@ ahd_mdffstat_print(u_int regvalue, u_int *cur_col, u_int wrap) } int -ahd_lastscb_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "LASTSCB", - 0x5e, regvalue, cur_col, wrap)); -} - -int -ahd_shaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SHADDR", - 0x60, regvalue, cur_col, wrap)); -} - -int -ahd_negoaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "NEGOADDR", - 0x60, regvalue, cur_col, wrap)); -} - -int -ahd_negperiod_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "NEGPERIOD", - 0x61, regvalue, cur_col, wrap)); -} - -int -ahd_negoffset_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "NEGOFFSET", - 0x62, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t NEGPPROPTS_parse_table[] = { - { "PPROPT_IUT", 0x01, 0x01 }, - { "PPROPT_DT", 0x02, 0x02 }, - { "PPROPT_QAS", 0x04, 0x04 }, - { "PPROPT_PACE", 0x08, 0x08 } -}; - -int -ahd_negppropts_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NEGPPROPTS_parse_table, 4, "NEGPPROPTS", - 0x63, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t NEGCONOPTS_parse_table[] = { - { "WIDEXFER", 0x01, 0x01 }, - { "ENAUTOATNO", 0x02, 0x02 }, - { "ENAUTOATNI", 0x04, 0x04 }, - { "ENSLOWCRC", 0x08, 0x08 }, - { "RTI_OVRDTRN", 0x10, 0x10 }, - { "RTI_WRTDIS", 0x20, 0x20 }, - { "ENSNAPSHOT", 0x40, 0x40 } -}; - -int -ahd_negconopts_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NEGCONOPTS_parse_table, 7, "NEGCONOPTS", - 0x64, regvalue, cur_col, wrap)); -} - -int -ahd_annexcol_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ANNEXCOL", - 0x65, regvalue, cur_col, wrap)); -} - -int -ahd_annexdat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ANNEXDAT", - 0x66, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SCSCHKN_parse_table[] = { - { "LSTSGCLRDIS", 0x01, 0x01 }, - { "SHVALIDSTDIS", 0x02, 0x02 }, - { "DFFACTCLR", 0x04, 0x04 }, - { "SDONEMSKDIS", 0x08, 0x08 }, - { "WIDERESEN", 0x10, 0x10 }, - { "CURRFIFODEF", 0x20, 0x20 }, - { "STSELSKIDDIS", 0x40, 0x40 }, - { "BIDICHKDIS", 0x80, 0x80 } -}; - -int -ahd_scschkn_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCSCHKN_parse_table, 8, "SCSCHKN", - 0x66, regvalue, cur_col, wrap)); -} - -int -ahd_iownid_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "IOWNID", - 0x67, regvalue, cur_col, wrap)); -} - -int -ahd_shcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SHCNT", - 0x68, regvalue, cur_col, wrap)); -} - -int -ahd_townid_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "TOWNID", - 0x69, regvalue, cur_col, wrap)); -} - -int ahd_seloid_print(u_int regvalue, u_int *cur_col, u_int wrap) { return (ahd_print_register(NULL, 0, "SELOID", 0x6b, regvalue, cur_col, wrap)); } -int -ahd_haddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "HADDR", - 0x70, regvalue, cur_col, wrap)); -} - -int -ahd_hcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "HCNT", - 0x78, regvalue, cur_col, wrap)); -} - -int -ahd_sghaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SGHADDR", - 0x7c, regvalue, cur_col, wrap)); -} - -int -ahd_scbhaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCBHADDR", - 0x7c, regvalue, cur_col, wrap)); -} - -int -ahd_sghcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SGHCNT", - 0x84, regvalue, cur_col, wrap)); -} - -int -ahd_scbhcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCBHCNT", - 0x84, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t DFF_THRSH_parse_table[] = { - { "WR_DFTHRSH_MIN", 0x00, 0x70 }, - { "RD_DFTHRSH_MIN", 0x00, 0x07 }, - { "RD_DFTHRSH_25", 0x01, 0x07 }, - { "RD_DFTHRSH_50", 0x02, 0x07 }, - { "RD_DFTHRSH_63", 0x03, 0x07 }, - { "RD_DFTHRSH_75", 0x04, 0x07 }, - { "RD_DFTHRSH_85", 0x05, 0x07 }, - { "RD_DFTHRSH_90", 0x06, 0x07 }, - { "RD_DFTHRSH_MAX", 0x07, 0x07 }, - { "WR_DFTHRSH_25", 0x10, 0x70 }, - { "WR_DFTHRSH_50", 0x20, 0x70 }, - { "WR_DFTHRSH_63", 0x30, 0x70 }, - { "WR_DFTHRSH_75", 0x40, 0x70 }, - { "WR_DFTHRSH_85", 0x50, 0x70 }, - { "WR_DFTHRSH_90", 0x60, 0x70 }, - { "WR_DFTHRSH_MAX", 0x70, 0x70 }, - { "RD_DFTHRSH", 0x07, 0x07 }, - { "WR_DFTHRSH", 0x70, 0x70 } -}; - -int -ahd_dff_thrsh_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(DFF_THRSH_parse_table, 18, "DFF_THRSH", - 0x88, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t PCIXCTL_parse_table[] = { - { "CMPABCDIS", 0x01, 0x01 }, - { "TSCSERREN", 0x02, 0x02 }, - { "SRSPDPEEN", 0x04, 0x04 }, - { "SPLTSTADIS", 0x08, 0x08 }, - { "SPLTSMADIS", 0x10, 0x10 }, - { "UNEXPSCIEN", 0x20, 0x20 }, - { "SERRPULSE", 0x80, 0x80 } -}; - -int -ahd_pcixctl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(PCIXCTL_parse_table, 7, "PCIXCTL", - 0x93, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t DCHSPLTSTAT0_parse_table[] = { - { "RXSPLTRSP", 0x01, 0x01 }, - { "RXSCEMSG", 0x02, 0x02 }, - { "RXOVRUN", 0x04, 0x04 }, - { "CNTNOTCMPLT", 0x08, 0x08 }, - { "SCDATBUCKET", 0x10, 0x10 }, - { "SCADERR", 0x20, 0x20 }, - { "SCBCERR", 0x40, 0x40 }, - { "STAETERM", 0x80, 0x80 } -}; - -int -ahd_dchspltstat0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(DCHSPLTSTAT0_parse_table, 8, "DCHSPLTSTAT0", - 0x96, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t DCHSPLTSTAT1_parse_table[] = { - { "RXDATABUCKET", 0x01, 0x01 } -}; - -int -ahd_dchspltstat1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(DCHSPLTSTAT1_parse_table, 1, "DCHSPLTSTAT1", - 0x97, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SGSPLTSTAT0_parse_table[] = { - { "RXSPLTRSP", 0x01, 0x01 }, - { "RXSCEMSG", 0x02, 0x02 }, - { "RXOVRUN", 0x04, 0x04 }, - { "CNTNOTCMPLT", 0x08, 0x08 }, - { "SCDATBUCKET", 0x10, 0x10 }, - { "SCADERR", 0x20, 0x20 }, - { "SCBCERR", 0x40, 0x40 }, - { "STAETERM", 0x80, 0x80 } -}; - -int -ahd_sgspltstat0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SGSPLTSTAT0_parse_table, 8, "SGSPLTSTAT0", - 0x9e, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SGSPLTSTAT1_parse_table[] = { - { "RXDATABUCKET", 0x01, 0x01 } -}; - -int -ahd_sgspltstat1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SGSPLTSTAT1_parse_table, 1, "SGSPLTSTAT1", - 0x9f, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t DF0PCISTAT_parse_table[] = { - { "DPR", 0x01, 0x01 }, - { "TWATERR", 0x02, 0x02 }, - { "RDPERR", 0x04, 0x04 }, - { "SCAAPERR", 0x08, 0x08 }, - { "RTA", 0x10, 0x10 }, - { "RMA", 0x20, 0x20 }, - { "SSE", 0x40, 0x40 }, - { "DPE", 0x80, 0x80 } -}; - -int -ahd_df0pcistat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(DF0PCISTAT_parse_table, 8, "DF0PCISTAT", - 0xa0, regvalue, cur_col, wrap)); -} - -int -ahd_reg0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "REG0", - 0xa0, regvalue, cur_col, wrap)); -} - -int -ahd_reg_isr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "REG_ISR", - 0xa4, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SG_STATE_parse_table[] = { { "SEGS_AVAIL", 0x01, 0x01 }, { "LOADING_NEEDED", 0x02, 0x02 }, @@ -1571,54 +543,6 @@ ahd_sg_state_print(u_int regvalue, u_int *cur_col, u_int wrap) 0xa6, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t TARGPCISTAT_parse_table[] = { - { "TWATERR", 0x02, 0x02 }, - { "STA", 0x08, 0x08 }, - { "SSE", 0x40, 0x40 }, - { "DPE", 0x80, 0x80 } -}; - -int -ahd_targpcistat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(TARGPCISTAT_parse_table, 4, "TARGPCISTAT", - 0xa7, regvalue, cur_col, wrap)); -} - -int -ahd_scbptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCBPTR", - 0xa8, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SCBAUTOPTR_parse_table[] = { - { "SCBPTR_OFF", 0x07, 0x07 }, - { "SCBPTR_ADDR", 0x38, 0x38 }, - { "AUSCBPTR_EN", 0x80, 0x80 } -}; - -int -ahd_scbautoptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCBAUTOPTR_parse_table, 3, "SCBAUTOPTR", - 0xab, regvalue, cur_col, wrap)); -} - -int -ahd_ccsgaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CCSGADDR", - 0xac, regvalue, cur_col, wrap)); -} - -int -ahd_ccscbaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CCSCBADDR", - 0xac, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t CCSCBCTL_parse_table[] = { { "CCSCBRESET", 0x01, 0x01 }, { "CCSCBDIR", 0x04, 0x04 }, @@ -1651,138 +575,6 @@ ahd_ccsgctl_print(u_int regvalue, u_int *cur_col, u_int wrap) 0xad, regvalue, cur_col, wrap)); } -int -ahd_ccsgram_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CCSGRAM", - 0xb0, regvalue, cur_col, wrap)); -} - -int -ahd_ccscbram_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CCSCBRAM", - 0xb0, regvalue, cur_col, wrap)); -} - -int -ahd_brddat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "BRDDAT", - 0xb8, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t BRDCTL_parse_table[] = { - { "BRDSTB", 0x01, 0x01 }, - { "BRDRW", 0x02, 0x02 }, - { "BRDEN", 0x04, 0x04 }, - { "BRDADDR", 0x38, 0x38 }, - { "FLXARBREQ", 0x40, 0x40 }, - { "FLXARBACK", 0x80, 0x80 } -}; - -int -ahd_brdctl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(BRDCTL_parse_table, 6, "BRDCTL", - 0xb9, regvalue, cur_col, wrap)); -} - -int -ahd_seeadr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SEEADR", - 0xba, regvalue, cur_col, wrap)); -} - -int -ahd_seedat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SEEDAT", - 0xbc, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SEECTL_parse_table[] = { - { "SEEOP_ERAL", 0x40, 0x70 }, - { "SEEOP_WRITE", 0x50, 0x70 }, - { "SEEOP_READ", 0x60, 0x70 }, - { "SEEOP_ERASE", 0x70, 0x70 }, - { "SEESTART", 0x01, 0x01 }, - { "SEERST", 0x02, 0x02 }, - { "SEEOPCODE", 0x70, 0x70 }, - { "SEEOP_EWEN", 0x40, 0x40 }, - { "SEEOP_WALL", 0x40, 0x40 }, - { "SEEOP_EWDS", 0x40, 0x40 } -}; - -int -ahd_seectl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SEECTL_parse_table, 10, "SEECTL", - 0xbe, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SEESTAT_parse_table[] = { - { "SEESTART", 0x01, 0x01 }, - { "SEEBUSY", 0x02, 0x02 }, - { "SEEARBACK", 0x04, 0x04 }, - { "LDALTID_L", 0x08, 0x08 }, - { "SEEOPCODE", 0x70, 0x70 }, - { "INIT_DONE", 0x80, 0x80 } -}; - -int -ahd_seestat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SEESTAT_parse_table, 6, "SEESTAT", - 0xbe, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t DSPDATACTL_parse_table[] = { - { "XMITOFFSTDIS", 0x02, 0x02 }, - { "RCVROFFSTDIS", 0x04, 0x04 }, - { "DESQDIS", 0x10, 0x10 }, - { "BYPASSENAB", 0x80, 0x80 } -}; - -int -ahd_dspdatactl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(DSPDATACTL_parse_table, 4, "DSPDATACTL", - 0xc1, regvalue, cur_col, wrap)); -} - -int -ahd_dfdat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "DFDAT", - 0xc4, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t DSPSELECT_parse_table[] = { - { "DSPSEL", 0x1f, 0x1f }, - { "AUTOINCEN", 0x80, 0x80 } -}; - -int -ahd_dspselect_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(DSPSELECT_parse_table, 2, "DSPSELECT", - 0xc4, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t WRTBIASCTL_parse_table[] = { - { "XMITMANVAL", 0x3f, 0x3f }, - { "AUTOXBCDIS", 0x80, 0x80 } -}; - -int -ahd_wrtbiasctl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(WRTBIASCTL_parse_table, 2, "WRTBIASCTL", - 0xc5, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SEQCTL0_parse_table[] = { { "LOADRAM", 0x01, 0x01 }, { "SEQRESET", 0x02, 0x02 }, @@ -1801,18 +593,6 @@ ahd_seqctl0_print(u_int regvalue, u_int *cur_col, u_int wrap) 0xd6, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t FLAGS_parse_table[] = { - { "CARRY", 0x01, 0x01 }, - { "ZERO", 0x02, 0x02 } -}; - -int -ahd_flags_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(FLAGS_parse_table, 2, "FLAGS", - 0xd8, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SEQINTCTL_parse_table[] = { { "IRET", 0x01, 0x01 }, { "INTMASK1", 0x02, 0x02 }, @@ -1831,118 +611,6 @@ ahd_seqintctl_print(u_int regvalue, u_int *cur_col, u_int wrap) } int -ahd_seqram_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SEQRAM", - 0xda, regvalue, cur_col, wrap)); -} - -int -ahd_prgmcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "PRGMCNT", - 0xde, regvalue, cur_col, wrap)); -} - -int -ahd_accum_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ACCUM", - 0xe0, regvalue, cur_col, wrap)); -} - -int -ahd_sindex_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SINDEX", - 0xe2, regvalue, cur_col, wrap)); -} - -int -ahd_dindex_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "DINDEX", - 0xe4, regvalue, cur_col, wrap)); -} - -int -ahd_allones_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ALLONES", - 0xe8, regvalue, cur_col, wrap)); -} - -int -ahd_allzeros_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ALLZEROS", - 0xea, regvalue, cur_col, wrap)); -} - -int -ahd_none_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "NONE", - 0xea, regvalue, cur_col, wrap)); -} - -int -ahd_sindir_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SINDIR", - 0xec, regvalue, cur_col, wrap)); -} - -int -ahd_dindir_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "DINDIR", - 0xed, regvalue, cur_col, wrap)); -} - -int -ahd_stack_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "STACK", - 0xf2, regvalue, cur_col, wrap)); -} - -int -ahd_intvec1_addr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "INTVEC1_ADDR", - 0xf4, regvalue, cur_col, wrap)); -} - -int -ahd_curaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CURADDR", - 0xf4, regvalue, cur_col, wrap)); -} - -int -ahd_intvec2_addr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "INTVEC2_ADDR", - 0xf6, regvalue, cur_col, wrap)); -} - -int -ahd_longjmp_addr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "LONGJMP_ADDR", - 0xf8, regvalue, cur_col, wrap)); -} - -int -ahd_accum_save_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ACCUM_SAVE", - 0xfa, regvalue, cur_col, wrap)); -} - -int ahd_sram_base_print(u_int regvalue, u_int *cur_col, u_int wrap) { return (ahd_print_register(NULL, 0, "SRAM_BASE", @@ -1950,69 +618,6 @@ ahd_sram_base_print(u_int regvalue, u_int *cur_col, u_int wrap) } int -ahd_waiting_scb_tails_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "WAITING_SCB_TAILS", - 0x100, regvalue, cur_col, wrap)); -} - -int -ahd_waiting_tid_head_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "WAITING_TID_HEAD", - 0x120, regvalue, cur_col, wrap)); -} - -int -ahd_waiting_tid_tail_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "WAITING_TID_TAIL", - 0x122, regvalue, cur_col, wrap)); -} - -int -ahd_next_queued_scb_addr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "NEXT_QUEUED_SCB_ADDR", - 0x124, regvalue, cur_col, wrap)); -} - -int -ahd_complete_scb_head_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "COMPLETE_SCB_HEAD", - 0x128, regvalue, cur_col, wrap)); -} - -int -ahd_complete_scb_dmainprog_head_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "COMPLETE_SCB_DMAINPROG_HEAD", - 0x12a, regvalue, cur_col, wrap)); -} - -int -ahd_complete_dma_scb_head_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "COMPLETE_DMA_SCB_HEAD", - 0x12c, regvalue, cur_col, wrap)); -} - -int -ahd_complete_dma_scb_tail_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "COMPLETE_DMA_SCB_TAIL", - 0x12e, regvalue, cur_col, wrap)); -} - -int -ahd_complete_on_qfreeze_head_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "COMPLETE_ON_QFREEZE_HEAD", - 0x130, regvalue, cur_col, wrap)); -} - -int ahd_qfreeze_count_print(u_int regvalue, u_int *cur_col, u_int wrap) { return (ahd_print_register(NULL, 0, "QFREEZE_COUNT", @@ -2033,33 +638,6 @@ ahd_saved_mode_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x136, regvalue, cur_col, wrap)); } -int -ahd_msg_out_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "MSG_OUT", - 0x137, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t DMAPARAMS_parse_table[] = { - { "FIFORESET", 0x01, 0x01 }, - { "FIFOFLUSH", 0x02, 0x02 }, - { "DIRECTION", 0x04, 0x04 }, - { "HDMAEN", 0x08, 0x08 }, - { "HDMAENACK", 0x08, 0x08 }, - { "SDMAEN", 0x10, 0x10 }, - { "SDMAENACK", 0x10, 0x10 }, - { "SCSIEN", 0x20, 0x20 }, - { "WIDEODD", 0x40, 0x40 }, - { "PRELOADEN", 0x80, 0x80 } -}; - -int -ahd_dmaparams_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(DMAPARAMS_parse_table, 10, "DMAPARAMS", - 0x138, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SEQ_FLAGS_parse_table[] = { { "NO_DISCONNECT", 0x01, 0x01 }, { "SPHASE_PENDING", 0x02, 0x02 }, @@ -2079,20 +657,6 @@ ahd_seq_flags_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x139, regvalue, cur_col, wrap)); } -int -ahd_saved_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SAVED_SCSIID", - 0x13a, regvalue, cur_col, wrap)); -} - -int -ahd_saved_lun_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SAVED_LUN", - 0x13b, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t LASTPHASE_parse_table[] = { { "P_DATAOUT", 0x00, 0xe0 }, { "P_DATAOUT_DT", 0x20, 0xe0 }, @@ -2116,96 +680,6 @@ ahd_lastphase_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x13c, regvalue, cur_col, wrap)); } -int -ahd_qoutfifo_entry_valid_tag_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "QOUTFIFO_ENTRY_VALID_TAG", - 0x13d, regvalue, cur_col, wrap)); -} - -int -ahd_kernel_tqinpos_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "KERNEL_TQINPOS", - 0x13e, regvalue, cur_col, wrap)); -} - -int -ahd_tqinpos_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "TQINPOS", - 0x13f, regvalue, cur_col, wrap)); -} - -int -ahd_shared_data_addr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SHARED_DATA_ADDR", - 0x140, regvalue, cur_col, wrap)); -} - -int -ahd_qoutfifo_next_addr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "QOUTFIFO_NEXT_ADDR", - 0x144, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t ARG_1_parse_table[] = { - { "CONT_MSG_LOOP_TARG", 0x02, 0x02 }, - { "CONT_MSG_LOOP_READ", 0x03, 0x03 }, - { "CONT_MSG_LOOP_WRITE",0x04, 0x04 }, - { "EXIT_MSG_LOOP", 0x08, 0x08 }, - { "MSGOUT_PHASEMIS", 0x10, 0x10 }, - { "SEND_REJ", 0x20, 0x20 }, - { "SEND_SENSE", 0x40, 0x40 }, - { "SEND_MSG", 0x80, 0x80 } -}; - -int -ahd_arg_1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(ARG_1_parse_table, 8, "ARG_1", - 0x148, regvalue, cur_col, wrap)); -} - -int -ahd_arg_2_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ARG_2", - 0x149, regvalue, cur_col, wrap)); -} - -int -ahd_last_msg_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "LAST_MSG", - 0x14a, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SCSISEQ_TEMPLATE_parse_table[] = { - { "ALTSTIM", 0x01, 0x01 }, - { "ENAUTOATNP", 0x02, 0x02 }, - { "MANUALP", 0x0c, 0x0c }, - { "ENRSELI", 0x10, 0x10 }, - { "ENSELI", 0x20, 0x20 }, - { "MANUALCTL", 0x40, 0x40 } -}; - -int -ahd_scsiseq_template_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCSISEQ_TEMPLATE_parse_table, 6, "SCSISEQ_TEMPLATE", - 0x14b, regvalue, cur_col, wrap)); -} - -int -ahd_initiator_tag_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "INITIATOR_TAG", - 0x14c, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SEQ_FLAGS2_parse_table[] = { { "PENDING_MK_MESSAGE", 0x01, 0x01 }, { "TARGET_MSG_PENDING", 0x02, 0x02 }, @@ -2220,62 +694,6 @@ ahd_seq_flags2_print(u_int regvalue, u_int *cur_col, u_int wrap) } int -ahd_allocfifo_scbptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "ALLOCFIFO_SCBPTR", - 0x14e, regvalue, cur_col, wrap)); -} - -int -ahd_int_coalescing_timer_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "INT_COALESCING_TIMER", - 0x150, regvalue, cur_col, wrap)); -} - -int -ahd_int_coalescing_maxcmds_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "INT_COALESCING_MAXCMDS", - 0x152, regvalue, cur_col, wrap)); -} - -int -ahd_int_coalescing_mincmds_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "INT_COALESCING_MINCMDS", - 0x153, regvalue, cur_col, wrap)); -} - -int -ahd_cmds_pending_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CMDS_PENDING", - 0x154, regvalue, cur_col, wrap)); -} - -int -ahd_int_coalescing_cmdcount_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "INT_COALESCING_CMDCOUNT", - 0x156, regvalue, cur_col, wrap)); -} - -int -ahd_local_hs_mailbox_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "LOCAL_HS_MAILBOX", - 0x157, regvalue, cur_col, wrap)); -} - -int -ahd_cmdsize_table_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "CMDSIZE_TABLE", - 0x158, regvalue, cur_col, wrap)); -} - -int ahd_mk_message_scb_print(u_int regvalue, u_int *cur_col, u_int wrap) { return (ahd_print_register(NULL, 0, "MK_MESSAGE_SCB", @@ -2290,53 +708,12 @@ ahd_mk_message_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap) } int -ahd_scb_residual_datacnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_RESIDUAL_DATACNT", - 0x180, regvalue, cur_col, wrap)); -} - -int ahd_scb_base_print(u_int regvalue, u_int *cur_col, u_int wrap) { return (ahd_print_register(NULL, 0, "SCB_BASE", 0x180, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t SCB_RESIDUAL_SGPTR_parse_table[] = { - { "SG_LIST_NULL", 0x01, 0x01 }, - { "SG_OVERRUN_RESID", 0x02, 0x02 }, - { "SG_ADDR_MASK", 0xf8, 0xf8 } -}; - -int -ahd_scb_residual_sgptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCB_RESIDUAL_SGPTR_parse_table, 3, "SCB_RESIDUAL_SGPTR", - 0x184, regvalue, cur_col, wrap)); -} - -int -ahd_scb_scsi_status_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_SCSI_STATUS", - 0x188, regvalue, cur_col, wrap)); -} - -int -ahd_scb_sense_busaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_SENSE_BUSADDR", - 0x18c, regvalue, cur_col, wrap)); -} - -int -ahd_scb_tag_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_TAG", - 0x190, regvalue, cur_col, wrap)); -} - static const ahd_reg_parse_entry_t SCB_CONTROL_parse_table[] = { { "SCB_TAG_TYPE", 0x03, 0x03 }, { "DISCONNECTED", 0x04, 0x04 }, @@ -2366,103 +743,3 @@ ahd_scb_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x193, regvalue, cur_col, wrap)); } -static const ahd_reg_parse_entry_t SCB_LUN_parse_table[] = { - { "LID", 0xff, 0xff } -}; - -int -ahd_scb_lun_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCB_LUN_parse_table, 1, "SCB_LUN", - 0x194, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SCB_TASK_ATTRIBUTE_parse_table[] = { - { "SCB_XFERLEN_ODD", 0x01, 0x01 } -}; - -int -ahd_scb_task_attribute_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCB_TASK_ATTRIBUTE_parse_table, 1, "SCB_TASK_ATTRIBUTE", - 0x195, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SCB_CDB_LEN_parse_table[] = { - { "SCB_CDB_LEN_PTR", 0x80, 0x80 } -}; - -int -ahd_scb_cdb_len_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCB_CDB_LEN_parse_table, 1, "SCB_CDB_LEN", - 0x196, regvalue, cur_col, wrap)); -} - -int -ahd_scb_task_management_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_TASK_MANAGEMENT", - 0x197, regvalue, cur_col, wrap)); -} - -int -ahd_scb_dataptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_DATAPTR", - 0x198, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SCB_DATACNT_parse_table[] = { - { "SG_HIGH_ADDR_BITS", 0x7f, 0x7f }, - { "SG_LAST_SEG", 0x80, 0x80 } -}; - -int -ahd_scb_datacnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCB_DATACNT_parse_table, 2, "SCB_DATACNT", - 0x1a0, regvalue, cur_col, wrap)); -} - -static const ahd_reg_parse_entry_t SCB_SGPTR_parse_table[] = { - { "SG_LIST_NULL", 0x01, 0x01 }, - { "SG_FULL_RESID", 0x02, 0x02 }, - { "SG_STATUS_VALID", 0x04, 0x04 } -}; - -int -ahd_scb_sgptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(SCB_SGPTR_parse_table, 3, "SCB_SGPTR", - 0x1a4, regvalue, cur_col, wrap)); -} - -int -ahd_scb_busaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_BUSADDR", - 0x1a8, regvalue, cur_col, wrap)); -} - -int -ahd_scb_next_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_NEXT", - 0x1ac, regvalue, cur_col, wrap)); -} - -int -ahd_scb_next2_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_NEXT2", - 0x1ae, regvalue, cur_col, wrap)); -} - -int -ahd_scb_disconnected_lists_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahd_print_register(NULL, 0, "SCB_DISCONNECTED_LISTS", - 0x1b8, regvalue, cur_col, wrap)); -} - diff --git a/drivers/scsi/aic7xxx/aic7xxx.reg b/drivers/scsi/aic7xxx/aic7xxx.reg index 0d2f763c3427..9a96e55da39a 100644 --- a/drivers/scsi/aic7xxx/aic7xxx.reg +++ b/drivers/scsi/aic7xxx/aic7xxx.reg @@ -51,6 +51,17 @@ VERSION = "$Id: //depot/aic7xxx/aic7xxx/aic7xxx.reg#40 $" */ /* + * Registers marked "dont_generate_debug_code" are not (yet) referenced + * from the driver code, and this keyword inhibit generation + * of debug code for them. + * + * REG_PRETTY_PRINT config will complain if dont_generate_debug_code + * is added to the register which is referenced in the driver. + * Unreferenced register with no dont_generate_debug_code will result + * in dead code. No warning is issued. + */ + +/* * SCSI Sequence Control (p. 3-11). * Each bit, when set starts a specific SCSI sequence on the bus */ @@ -97,6 +108,7 @@ register SXFRCTL1 { field ENSTIMER 0x04 field ACTNEGEN 0x02 field STPWEN 0x01 /* Powered Termination */ + dont_generate_debug_code } /* @@ -155,6 +167,7 @@ register SCSISIGO { mask P_MESGOUT CDI|MSGI mask P_STATUS CDI|IOI mask P_MESGIN CDI|IOI|MSGI + dont_generate_debug_code } /* @@ -194,6 +207,7 @@ register SCSIID { */ alias SCSIOFFSET mask SOFS_ULTRA2 0x7f /* Sync offset U2 chips */ + dont_generate_debug_code } /* @@ -205,6 +219,7 @@ register SCSIID { register SCSIDATL { address 0x006 access_mode RW + dont_generate_debug_code } register SCSIDATH { @@ -223,6 +238,7 @@ register STCNT { address 0x008 size 3 access_mode RW + dont_generate_debug_code } /* ALT_MODE registers (Ultra2 and Ultra160 chips) */ @@ -248,6 +264,7 @@ register OPTIONMODE { field AUTO_MSGOUT_DE 0x02 field DIS_MSGIN_DUALEDGE 0x01 mask OPTIONMODE_DEFAULTS AUTO_MSGOUT_DE|DIS_MSGIN_DUALEDGE + dont_generate_debug_code } /* ALT_MODE register on Ultra160 chips */ @@ -256,6 +273,7 @@ register TARGCRCCNT { size 2 access_mode RW count 2 + dont_generate_debug_code } /* @@ -271,6 +289,7 @@ register CLRSINT0 { field CLRSWRAP 0x08 field CLRIOERR 0x08 /* Ultra2 Only */ field CLRSPIORDY 0x02 + dont_generate_debug_code } /* @@ -306,6 +325,7 @@ register CLRSINT1 { field CLRSCSIPERR 0x04 field CLRPHASECHG 0x02 field CLRREQINIT 0x01 + dont_generate_debug_code } /* @@ -360,6 +380,7 @@ register SCSIID_ULTRA2 { access_mode RW mask TID 0xf0 /* Target ID mask */ mask OID 0x0f /* Our ID mask */ + dont_generate_debug_code } /* @@ -425,6 +446,7 @@ register SHADDR { address 0x014 size 4 access_mode RO + dont_generate_debug_code } /* @@ -441,6 +463,7 @@ register SELTIMER { field STAGE2 0x02 field STAGE1 0x01 alias TARGIDIN + dont_generate_debug_code } /* @@ -453,6 +476,7 @@ register SELID { access_mode RW mask SELID_MASK 0xf0 field ONEBIT 0x08 + dont_generate_debug_code } register SCAMCTL { @@ -473,6 +497,7 @@ register TARGID { size 2 access_mode RW count 14 + dont_generate_debug_code } /* @@ -495,6 +520,7 @@ register SPIOCAP { field EEPROM 0x04 /* Writable external BIOS ROM */ field ROM 0x02 /* Logic for accessing external ROM */ field SSPIOCPS 0x01 /* Termination and cable detection */ + dont_generate_debug_code } register BRDCTL { @@ -514,6 +540,7 @@ register BRDCTL { field BRDDAT2 0x04 field BRDRW_ULTRA2 0x02 field BRDSTB_ULTRA2 0x01 + dont_generate_debug_code } /* @@ -551,6 +578,7 @@ register SEECTL { field SEECK 0x04 field SEEDO 0x02 field SEEDI 0x01 + dont_generate_debug_code } /* * SCSI Block Control (p. 3-32) @@ -601,6 +629,7 @@ register SEQRAM { address 0x061 access_mode RW count 2 + dont_generate_debug_code } /* @@ -610,6 +639,7 @@ register SEQRAM { register SEQADDR0 { address 0x062 access_mode RW + dont_generate_debug_code } register SEQADDR1 { @@ -617,6 +647,7 @@ register SEQADDR1 { access_mode RW count 8 mask SEQADDR1_MASK 0x01 + dont_generate_debug_code } /* @@ -627,35 +658,41 @@ register ACCUM { address 0x064 access_mode RW accumulator + dont_generate_debug_code } register SINDEX { address 0x065 access_mode RW sindex + dont_generate_debug_code } register DINDEX { address 0x066 access_mode RW + dont_generate_debug_code } register ALLONES { address 0x069 access_mode RO allones + dont_generate_debug_code } register ALLZEROS { address 0x06a access_mode RO allzeros + dont_generate_debug_code } register NONE { address 0x06a access_mode WO none + dont_generate_debug_code } register FLAGS { @@ -664,16 +701,19 @@ register FLAGS { count 18 field ZERO 0x02 field CARRY 0x01 + dont_generate_debug_code } register SINDIR { address 0x06c access_mode RO + dont_generate_debug_code } register DINDIR { address 0x06d access_mode WO + dont_generate_debug_code } register FUNCTION1 { @@ -685,6 +725,7 @@ register STACK { address 0x06f access_mode RO count 5 + dont_generate_debug_code } const STACK_SIZE 4 @@ -716,6 +757,7 @@ register DSCOMMAND0 { field RAMPS 0x04 /* External SCB RAM Present */ field USCBSIZE32 0x02 /* Use 32byte SCB Page Size */ field CIOPARCKEN 0x01 /* Internal bus parity error enable */ + dont_generate_debug_code } register DSCOMMAND1 { @@ -724,6 +766,7 @@ register DSCOMMAND1 { mask DSLATT 0xfc /* PCI latency timer (non-ultra2) */ field HADDLDSEL1 0x02 /* Host Address Load Select Bits */ field HADDLDSEL0 0x01 + dont_generate_debug_code } /* @@ -735,6 +778,7 @@ register BUSTIME { count 2 mask BOFF 0xf0 mask BON 0x0f + dont_generate_debug_code } /* @@ -749,6 +793,7 @@ register BUSSPD { mask STBON 0x07 mask DFTHRSH_100 0xc0 mask DFTHRSH_75 0x80 + dont_generate_debug_code } /* aic7850/55/60/70/80/95 only */ @@ -756,6 +801,7 @@ register DSPCISTATUS { address 0x086 count 4 mask DFTHRSH_100 0xc0 + dont_generate_debug_code } /* aic7890/91/96/97 only */ @@ -764,6 +810,7 @@ register HS_MAILBOX { mask HOST_MAILBOX 0xF0 mask SEQ_MAILBOX 0x0F mask HOST_TQINPOS 0x80 /* Boundary at either 0 or 128 */ + dont_generate_debug_code } const HOST_MAILBOX_SHIFT 4 @@ -784,6 +831,7 @@ register HCNTRL { field INTEN 0x02 field CHIPRST 0x01 field CHIPRSTACK 0x01 + dont_generate_debug_code } /* @@ -795,12 +843,14 @@ register HADDR { address 0x088 size 4 access_mode RW + dont_generate_debug_code } register HCNT { address 0x08c size 3 access_mode RW + dont_generate_debug_code } /* @@ -810,6 +860,7 @@ register HCNT { register SCBPTR { address 0x090 access_mode RW + dont_generate_debug_code } /* @@ -878,6 +929,7 @@ register INTSTAT { mask SEQINT_MASK 0xf0|SEQINT /* SEQINT Status Codes */ mask INT_PEND (BRKADRINT|SEQINT|SCSIINT|CMDCMPLT) + dont_generate_debug_code } /* @@ -911,6 +963,7 @@ register CLRINT { field CLRSCSIINT 0x04 field CLRCMDINT 0x02 field CLRSEQINT 0x01 + dont_generate_debug_code } register DFCNTRL { @@ -944,6 +997,7 @@ register DFSTATUS { register DFWADDR { address 0x95 access_mode RW + dont_generate_debug_code } register DFRADDR { @@ -954,6 +1008,7 @@ register DFRADDR { register DFDAT { address 0x099 access_mode RW + dont_generate_debug_code } /* @@ -967,6 +1022,7 @@ register SCBCNT { count 1 field SCBAUTO 0x80 mask SCBCNT_MASK 0x1f + dont_generate_debug_code } /* @@ -977,6 +1033,7 @@ register QINFIFO { address 0x09b access_mode RW count 12 + dont_generate_debug_code } /* @@ -996,6 +1053,7 @@ register QOUTFIFO { address 0x09d access_mode WO count 7 + dont_generate_debug_code } register CRCCONTROL1 { @@ -1008,6 +1066,7 @@ register CRCCONTROL1 { field CRCREQCHKEN 0x10 field TARGCRCENDEN 0x08 field TARGCRCCNTEN 0x04 + dont_generate_debug_code } @@ -1040,6 +1099,7 @@ register SFUNCT { access_mode RW count 4 field ALT_MODE 0x80 + dont_generate_debug_code } /* @@ -1053,24 +1113,31 @@ scb { size 4 alias SCB_RESIDUAL_DATACNT alias SCB_CDB_STORE + dont_generate_debug_code } SCB_RESIDUAL_SGPTR { size 4 + dont_generate_debug_code } SCB_SCSI_STATUS { size 1 + dont_generate_debug_code } SCB_TARGET_PHASES { size 1 + dont_generate_debug_code } SCB_TARGET_DATA_DIR { size 1 + dont_generate_debug_code } SCB_TARGET_ITAG { size 1 + dont_generate_debug_code } SCB_DATAPTR { size 4 + dont_generate_debug_code } SCB_DATACNT { /* @@ -1080,12 +1147,14 @@ scb { size 4 field SG_LAST_SEG 0x80 /* In the fourth byte */ mask SG_HIGH_ADDR_BITS 0x7F /* In the fourth byte */ + dont_generate_debug_code } SCB_SGPTR { size 4 field SG_RESID_VALID 0x04 /* In the first byte */ field SG_FULL_RESID 0x02 /* In the first byte */ field SG_LIST_NULL 0x01 /* In the first byte */ + dont_generate_debug_code } SCB_CONTROL { size 1 @@ -1115,22 +1184,27 @@ scb { } SCB_CDB_LEN { size 1 + dont_generate_debug_code } SCB_SCSIRATE { size 1 + dont_generate_debug_code } SCB_SCSIOFFSET { size 1 count 1 + dont_generate_debug_code } SCB_NEXT { size 1 + dont_generate_debug_code } SCB_64_SPARE { size 16 } SCB_64_BTT { size 16 + dont_generate_debug_code } } @@ -1149,6 +1223,7 @@ register SEECTL_2840 { field CS_2840 0x04 field CK_2840 0x02 field DO_2840 0x01 + dont_generate_debug_code } register STATUS_2840 { @@ -1159,6 +1234,7 @@ register STATUS_2840 { mask BIOS_SEL 0x60 mask ADSEL 0x1e field DI_2840 0x01 + dont_generate_debug_code } /* --------------------- AIC-7870-only definitions -------------------- */ @@ -1166,18 +1242,22 @@ register STATUS_2840 { register CCHADDR { address 0x0E0 size 8 + dont_generate_debug_code } register CCHCNT { address 0x0E8 + dont_generate_debug_code } register CCSGRAM { address 0x0E9 + dont_generate_debug_code } register CCSGADDR { address 0x0EA + dont_generate_debug_code } register CCSGCTL { @@ -1186,11 +1266,13 @@ register CCSGCTL { field CCSGEN 0x08 field SG_FETCH_NEEDED 0x02 /* Bit used for software state */ field CCSGRESET 0x01 + dont_generate_debug_code } register CCSCBCNT { address 0xEF count 1 + dont_generate_debug_code } register CCSCBCTL { @@ -1201,14 +1283,17 @@ register CCSCBCTL { field CCSCBEN 0x08 field CCSCBDIR 0x04 field CCSCBRESET 0x01 + dont_generate_debug_code } register CCSCBADDR { address 0x0ED + dont_generate_debug_code } register CCSCBRAM { address 0xEC + dont_generate_debug_code } /* @@ -1218,23 +1303,28 @@ register SCBBADDR { address 0x0F0 access_mode RW count 3 + dont_generate_debug_code } register CCSCBPTR { address 0x0F1 + dont_generate_debug_code } register HNSCB_QOFF { address 0x0F4 count 4 + dont_generate_debug_code } register SNSCB_QOFF { address 0x0F6 + dont_generate_debug_code } register SDSCB_QOFF { address 0x0F8 + dont_generate_debug_code } register QOFF_CTLSTA { @@ -1244,6 +1334,7 @@ register QOFF_CTLSTA { field SDSCB_ROLLOVER 0x10 mask SCB_QSIZE 0x07 mask SCB_QSIZE_256 0x06 + dont_generate_debug_code } register DFF_THRSH { @@ -1267,6 +1358,7 @@ register DFF_THRSH { mask WR_DFTHRSH_90 0x60 mask WR_DFTHRSH_MAX 0x70 count 4 + dont_generate_debug_code } register SG_CACHE_PRE { @@ -1275,6 +1367,7 @@ register SG_CACHE_PRE { mask SG_ADDR_MASK 0xf8 field LAST_SEG 0x02 field LAST_SEG_DONE 0x01 + dont_generate_debug_code } register SG_CACHE_SHADOW { @@ -1283,6 +1376,7 @@ register SG_CACHE_SHADOW { mask SG_ADDR_MASK 0xf8 field LAST_SEG 0x02 field LAST_SEG_DONE 0x01 + dont_generate_debug_code } /* ---------------------- Scratch RAM Offsets ------------------------- */ /* These offsets are either to values that are initialized by the board's @@ -1309,6 +1403,7 @@ scratch_ram { BUSY_TARGETS { alias TARG_SCSIRATE size 16 + dont_generate_debug_code } /* * Bit vector of targets that have ULTRA enabled as set by @@ -1321,6 +1416,7 @@ scratch_ram { alias CMDSIZE_TABLE size 2 count 2 + dont_generate_debug_code } /* * Bit vector of targets that have disconnection disabled as set by @@ -1331,6 +1427,7 @@ scratch_ram { DISC_DSB { size 2 count 6 + dont_generate_debug_code } CMDSIZE_TABLE_TAIL { size 4 @@ -1341,12 +1438,14 @@ scratch_ram { */ MWI_RESIDUAL { size 1 + dont_generate_debug_code } /* * SCBID of the next SCB to be started by the controller. */ NEXT_QUEUED_SCB { size 1 + dont_generate_debug_code } /* * Single byte buffer used to designate the type or message @@ -1354,6 +1453,7 @@ scratch_ram { */ MSG_OUT { size 1 + dont_generate_debug_code } /* Parameters for DMA Logic */ DMAPARAMS { @@ -1369,6 +1469,7 @@ scratch_ram { field DIRECTION 0x04 /* Set indicates PCI->SCSI */ field FIFOFLUSH 0x02 field FIFORESET 0x01 + dont_generate_debug_code } SEQ_FLAGS { size 1 @@ -1390,9 +1491,11 @@ scratch_ram { */ SAVED_SCSIID { size 1 + dont_generate_debug_code } SAVED_LUN { size 1 + dont_generate_debug_code } /* * The last bus phase as seen by the sequencer. @@ -1417,6 +1520,7 @@ scratch_ram { */ WAITING_SCBH { size 1 + dont_generate_debug_code } /* * head of list of SCBs that are @@ -1425,6 +1529,7 @@ scratch_ram { */ DISCONNECTED_SCBH { size 1 + dont_generate_debug_code } /* * head of list of SCBs that are @@ -1432,6 +1537,7 @@ scratch_ram { */ FREE_SCBH { size 1 + dont_generate_debug_code } /* * head of list of SCBs that have @@ -1446,6 +1552,7 @@ scratch_ram { */ HSCB_ADDR { size 4 + dont_generate_debug_code } /* * Base address of our shared data with the kernel driver in host @@ -1454,15 +1561,19 @@ scratch_ram { */ SHARED_DATA_ADDR { size 4 + dont_generate_debug_code } KERNEL_QINPOS { size 1 + dont_generate_debug_code } QINPOS { size 1 + dont_generate_debug_code } QOUTPOS { size 1 + dont_generate_debug_code } /* * Kernel and sequencer offsets into the queue of @@ -1471,9 +1582,11 @@ scratch_ram { */ KERNEL_TQINPOS { size 1 + dont_generate_debug_code } TQINPOS { size 1 + dont_generate_debug_code } ARG_1 { size 1 @@ -1486,10 +1599,12 @@ scratch_ram { mask CONT_MSG_LOOP 0x04 mask CONT_TARG_SESSION 0x02 alias RETURN_1 + dont_generate_debug_code } ARG_2 { size 1 alias RETURN_2 + dont_generate_debug_code } /* @@ -1498,6 +1613,7 @@ scratch_ram { LAST_MSG { size 1 alias TARG_IMMEDIATE_SCB + dont_generate_debug_code } /* @@ -1513,6 +1629,7 @@ scratch_ram { field ENAUTOATNO 0x08 field ENAUTOATNI 0x04 field ENAUTOATNP 0x02 + dont_generate_debug_code } } @@ -1533,12 +1650,14 @@ scratch_ram { field HA_274_EXTENDED_TRANS 0x01 alias INITIATOR_TAG count 1 + dont_generate_debug_code } SEQ_FLAGS2 { size 1 field SCB_DMA 0x01 field TARGET_MSG_PENDING 0x02 + dont_generate_debug_code } } @@ -1562,6 +1681,7 @@ scratch_ram { field ENSPCHK 0x20 mask HSCSIID 0x07 /* our SCSI ID */ mask HWSCSIID 0x0f /* our SCSI ID if Wide Bus */ + dont_generate_debug_code } INTDEF { address 0x05c @@ -1569,11 +1689,13 @@ scratch_ram { count 1 field EDGE_TRIG 0x80 mask VECTOR 0x0f + dont_generate_debug_code } HOSTCONF { address 0x05d size 1 count 1 + dont_generate_debug_code } HA_274_BIOSCTRL { address 0x05f @@ -1582,6 +1704,7 @@ scratch_ram { mask BIOSMODE 0x30 mask BIOSDISABLED 0x30 field CHANNEL_B_PRIMARY 0x08 + dont_generate_debug_code } } @@ -1595,6 +1718,7 @@ scratch_ram { TARG_OFFSET { size 16 count 1 + dont_generate_debug_code } } diff --git a/drivers/scsi/aic7xxx/aic7xxx_core.c b/drivers/scsi/aic7xxx/aic7xxx_core.c index 0ae2b4605d09..e6f2bb7365e6 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_core.c +++ b/drivers/scsi/aic7xxx/aic7xxx_core.c @@ -814,6 +814,7 @@ ahc_intr(struct ahc_softc *ahc) static void ahc_restart(struct ahc_softc *ahc) { + uint8_t sblkctl; ahc_pause(ahc); @@ -868,6 +869,12 @@ ahc_restart(struct ahc_softc *ahc) ahc_outb(ahc, SEQADDR0, 0); ahc_outb(ahc, SEQADDR1, 0); + /* + * Take the LED out of diagnostic mode on PM resume, too + */ + sblkctl = ahc_inb(ahc, SBLKCTL); + ahc_outb(ahc, SBLKCTL, (sblkctl & ~(DIAGLEDEN|DIAGLEDON))); + ahc_unpause(ahc); } diff --git a/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped b/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped index 2ce1febca207..e821082a4f47 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped +++ b/drivers/scsi/aic7xxx/aic7xxx_reg.h_shipped @@ -27,20 +27,6 @@ ahc_reg_print_t ahc_sxfrctl0_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_sxfrctl1_print; -#else -#define ahc_sxfrctl1_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SXFRCTL1", 0x02, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scsisigo_print; -#else -#define ahc_scsisigo_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCSISIGO", 0x03, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_scsisigi_print; #else #define ahc_scsisigi_print(regvalue, cur_col, wrap) \ @@ -55,55 +41,6 @@ ahc_reg_print_t ahc_scsirate_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scsiid_print; -#else -#define ahc_scsiid_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCSIID", 0x05, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scsidatl_print; -#else -#define ahc_scsidatl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCSIDATL", 0x06, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scsidath_print; -#else -#define ahc_scsidath_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCSIDATH", 0x07, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_stcnt_print; -#else -#define ahc_stcnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "STCNT", 0x08, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_optionmode_print; -#else -#define ahc_optionmode_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "OPTIONMODE", 0x08, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_targcrccnt_print; -#else -#define ahc_targcrccnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "TARGCRCCNT", 0x0a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_clrsint0_print; -#else -#define ahc_clrsint0_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CLRSINT0", 0x0b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_sstat0_print; #else #define ahc_sstat0_print(regvalue, cur_col, wrap) \ @@ -111,13 +48,6 @@ ahc_reg_print_t ahc_sstat0_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_clrsint1_print; -#else -#define ahc_clrsint1_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CLRSINT1", 0x0c, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_sstat1_print; #else #define ahc_sstat1_print(regvalue, cur_col, wrap) \ @@ -139,13 +69,6 @@ ahc_reg_print_t ahc_sstat3_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scsiid_ultra2_print; -#else -#define ahc_scsiid_ultra2_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCSIID_ULTRA2", 0x0f, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_simode0_print; #else #define ahc_simode0_print(regvalue, cur_col, wrap) \ @@ -167,76 +90,6 @@ ahc_reg_print_t ahc_scsibusl_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scsibush_print; -#else -#define ahc_scsibush_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCSIBUSH", 0x13, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_sxfrctl2_print; -#else -#define ahc_sxfrctl2_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SXFRCTL2", 0x13, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_shaddr_print; -#else -#define ahc_shaddr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SHADDR", 0x14, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_seltimer_print; -#else -#define ahc_seltimer_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SELTIMER", 0x18, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_selid_print; -#else -#define ahc_selid_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SELID", 0x19, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scamctl_print; -#else -#define ahc_scamctl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCAMCTL", 0x1a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_targid_print; -#else -#define ahc_targid_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "TARGID", 0x1b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_spiocap_print; -#else -#define ahc_spiocap_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SPIOCAP", 0x1b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_brdctl_print; -#else -#define ahc_brdctl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "BRDCTL", 0x1d, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_seectl_print; -#else -#define ahc_seectl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SEECTL", 0x1e, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_sblkctl_print; #else #define ahc_sblkctl_print(regvalue, cur_col, wrap) \ @@ -244,62 +97,6 @@ ahc_reg_print_t ahc_sblkctl_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_busy_targets_print; -#else -#define ahc_busy_targets_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "BUSY_TARGETS", 0x20, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ultra_enb_print; -#else -#define ahc_ultra_enb_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "ULTRA_ENB", 0x30, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_disc_dsb_print; -#else -#define ahc_disc_dsb_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DISC_DSB", 0x32, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_cmdsize_table_tail_print; -#else -#define ahc_cmdsize_table_tail_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CMDSIZE_TABLE_TAIL", 0x34, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_mwi_residual_print; -#else -#define ahc_mwi_residual_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "MWI_RESIDUAL", 0x38, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_next_queued_scb_print; -#else -#define ahc_next_queued_scb_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "NEXT_QUEUED_SCB", 0x39, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_msg_out_print; -#else -#define ahc_msg_out_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "MSG_OUT", 0x3a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dmaparams_print; -#else -#define ahc_dmaparams_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DMAPARAMS", 0x3b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_seq_flags_print; #else #define ahc_seq_flags_print(regvalue, cur_col, wrap) \ @@ -307,20 +104,6 @@ ahc_reg_print_t ahc_seq_flags_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_saved_scsiid_print; -#else -#define ahc_saved_scsiid_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SAVED_SCSIID", 0x3d, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_saved_lun_print; -#else -#define ahc_saved_lun_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SAVED_LUN", 0x3e, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_lastphase_print; #else #define ahc_lastphase_print(regvalue, cur_col, wrap) \ @@ -328,153 +111,6 @@ ahc_reg_print_t ahc_lastphase_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_waiting_scbh_print; -#else -#define ahc_waiting_scbh_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "WAITING_SCBH", 0x40, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_disconnected_scbh_print; -#else -#define ahc_disconnected_scbh_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DISCONNECTED_SCBH", 0x41, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_free_scbh_print; -#else -#define ahc_free_scbh_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "FREE_SCBH", 0x42, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_complete_scbh_print; -#else -#define ahc_complete_scbh_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "COMPLETE_SCBH", 0x43, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_hscb_addr_print; -#else -#define ahc_hscb_addr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HSCB_ADDR", 0x44, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_shared_data_addr_print; -#else -#define ahc_shared_data_addr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SHARED_DATA_ADDR", 0x48, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_kernel_qinpos_print; -#else -#define ahc_kernel_qinpos_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "KERNEL_QINPOS", 0x4c, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_qinpos_print; -#else -#define ahc_qinpos_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "QINPOS", 0x4d, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_qoutpos_print; -#else -#define ahc_qoutpos_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "QOUTPOS", 0x4e, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_kernel_tqinpos_print; -#else -#define ahc_kernel_tqinpos_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "KERNEL_TQINPOS", 0x4f, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_tqinpos_print; -#else -#define ahc_tqinpos_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "TQINPOS", 0x50, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_arg_1_print; -#else -#define ahc_arg_1_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "ARG_1", 0x51, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_arg_2_print; -#else -#define ahc_arg_2_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "ARG_2", 0x52, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_last_msg_print; -#else -#define ahc_last_msg_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "LAST_MSG", 0x53, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scsiseq_template_print; -#else -#define ahc_scsiseq_template_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCSISEQ_TEMPLATE", 0x54, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ha_274_biosglobal_print; -#else -#define ahc_ha_274_biosglobal_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HA_274_BIOSGLOBAL", 0x56, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_seq_flags2_print; -#else -#define ahc_seq_flags2_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SEQ_FLAGS2", 0x57, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scsiconf_print; -#else -#define ahc_scsiconf_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCSICONF", 0x5a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_intdef_print; -#else -#define ahc_intdef_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "INTDEF", 0x5c, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_hostconf_print; -#else -#define ahc_hostconf_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HOSTCONF", 0x5d, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ha_274_biosctrl_print; -#else -#define ahc_ha_274_biosctrl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HA_274_BIOSCTRL", 0x5f, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_seqctl_print; #else #define ahc_seqctl_print(regvalue, cur_col, wrap) \ @@ -482,111 +118,6 @@ ahc_reg_print_t ahc_seqctl_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_seqram_print; -#else -#define ahc_seqram_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SEQRAM", 0x61, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_seqaddr0_print; -#else -#define ahc_seqaddr0_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SEQADDR0", 0x62, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_seqaddr1_print; -#else -#define ahc_seqaddr1_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SEQADDR1", 0x63, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_accum_print; -#else -#define ahc_accum_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "ACCUM", 0x64, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_sindex_print; -#else -#define ahc_sindex_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SINDEX", 0x65, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dindex_print; -#else -#define ahc_dindex_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DINDEX", 0x66, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_allones_print; -#else -#define ahc_allones_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "ALLONES", 0x69, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_allzeros_print; -#else -#define ahc_allzeros_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "ALLZEROS", 0x6a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_none_print; -#else -#define ahc_none_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "NONE", 0x6a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_flags_print; -#else -#define ahc_flags_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "FLAGS", 0x6b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_sindir_print; -#else -#define ahc_sindir_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SINDIR", 0x6c, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dindir_print; -#else -#define ahc_dindir_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DINDIR", 0x6d, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_function1_print; -#else -#define ahc_function1_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "FUNCTION1", 0x6e, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_stack_print; -#else -#define ahc_stack_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "STACK", 0x6f, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_targ_offset_print; -#else -#define ahc_targ_offset_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "TARG_OFFSET", 0x70, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_sram_base_print; #else #define ahc_sram_base_print(regvalue, cur_col, wrap) \ @@ -594,97 +125,6 @@ ahc_reg_print_t ahc_sram_base_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_bctl_print; -#else -#define ahc_bctl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "BCTL", 0x84, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dscommand0_print; -#else -#define ahc_dscommand0_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DSCOMMAND0", 0x84, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_bustime_print; -#else -#define ahc_bustime_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "BUSTIME", 0x85, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dscommand1_print; -#else -#define ahc_dscommand1_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DSCOMMAND1", 0x85, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_busspd_print; -#else -#define ahc_busspd_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "BUSSPD", 0x86, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_hs_mailbox_print; -#else -#define ahc_hs_mailbox_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HS_MAILBOX", 0x86, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dspcistatus_print; -#else -#define ahc_dspcistatus_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DSPCISTATUS", 0x86, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_hcntrl_print; -#else -#define ahc_hcntrl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HCNTRL", 0x87, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_haddr_print; -#else -#define ahc_haddr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HADDR", 0x88, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_hcnt_print; -#else -#define ahc_hcnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HCNT", 0x8c, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scbptr_print; -#else -#define ahc_scbptr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCBPTR", 0x90, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_intstat_print; -#else -#define ahc_intstat_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "INTSTAT", 0x91, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_clrint_print; -#else -#define ahc_clrint_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CLRINT", 0x92, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_error_print; #else #define ahc_error_print(regvalue, cur_col, wrap) \ @@ -706,69 +146,6 @@ ahc_reg_print_t ahc_dfstatus_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dfwaddr_print; -#else -#define ahc_dfwaddr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DFWADDR", 0x95, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dfraddr_print; -#else -#define ahc_dfraddr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DFRADDR", 0x97, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dfdat_print; -#else -#define ahc_dfdat_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DFDAT", 0x99, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scbcnt_print; -#else -#define ahc_scbcnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCBCNT", 0x9a, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_qinfifo_print; -#else -#define ahc_qinfifo_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "QINFIFO", 0x9b, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_qincnt_print; -#else -#define ahc_qincnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "QINCNT", 0x9c, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_qoutfifo_print; -#else -#define ahc_qoutfifo_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "QOUTFIFO", 0x9d, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_crccontrol1_print; -#else -#define ahc_crccontrol1_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CRCCONTROL1", 0x9d, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_qoutcnt_print; -#else -#define ahc_qoutcnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "QOUTCNT", 0x9e, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_scsiphase_print; #else #define ahc_scsiphase_print(regvalue, cur_col, wrap) \ @@ -776,13 +153,6 @@ ahc_reg_print_t ahc_scsiphase_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_sfunct_print; -#else -#define ahc_sfunct_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SFUNCT", 0x9f, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_scb_base_print; #else #define ahc_scb_base_print(regvalue, cur_col, wrap) \ @@ -790,69 +160,6 @@ ahc_reg_print_t ahc_scb_base_print; #endif #if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_cdb_ptr_print; -#else -#define ahc_scb_cdb_ptr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_CDB_PTR", 0xa0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_residual_sgptr_print; -#else -#define ahc_scb_residual_sgptr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_RESIDUAL_SGPTR", 0xa4, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_scsi_status_print; -#else -#define ahc_scb_scsi_status_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_SCSI_STATUS", 0xa8, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_target_phases_print; -#else -#define ahc_scb_target_phases_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_TARGET_PHASES", 0xa9, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_target_data_dir_print; -#else -#define ahc_scb_target_data_dir_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_TARGET_DATA_DIR", 0xaa, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_target_itag_print; -#else -#define ahc_scb_target_itag_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_TARGET_ITAG", 0xab, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_dataptr_print; -#else -#define ahc_scb_dataptr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_DATAPTR", 0xac, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_datacnt_print; -#else -#define ahc_scb_datacnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_DATACNT", 0xb0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_sgptr_print; -#else -#define ahc_scb_sgptr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_SGPTR", 0xb4, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS ahc_reg_print_t ahc_scb_control_print; #else #define ahc_scb_control_print(regvalue, cur_col, wrap) \ @@ -880,188 +187,6 @@ ahc_reg_print_t ahc_scb_tag_print; ahc_print_register(NULL, 0, "SCB_TAG", 0xbb, regvalue, cur_col, wrap) #endif -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_cdb_len_print; -#else -#define ahc_scb_cdb_len_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_CDB_LEN", 0xbc, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_scsirate_print; -#else -#define ahc_scb_scsirate_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_SCSIRATE", 0xbd, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_scsioffset_print; -#else -#define ahc_scb_scsioffset_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_SCSIOFFSET", 0xbe, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_next_print; -#else -#define ahc_scb_next_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_NEXT", 0xbf, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_64_spare_print; -#else -#define ahc_scb_64_spare_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_64_SPARE", 0xc0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_seectl_2840_print; -#else -#define ahc_seectl_2840_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SEECTL_2840", 0xc0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_status_2840_print; -#else -#define ahc_status_2840_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "STATUS_2840", 0xc1, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scb_64_btt_print; -#else -#define ahc_scb_64_btt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCB_64_BTT", 0xd0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_cchaddr_print; -#else -#define ahc_cchaddr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCHADDR", 0xe0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_cchcnt_print; -#else -#define ahc_cchcnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCHCNT", 0xe8, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ccsgram_print; -#else -#define ahc_ccsgram_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCSGRAM", 0xe9, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ccsgaddr_print; -#else -#define ahc_ccsgaddr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCSGADDR", 0xea, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ccsgctl_print; -#else -#define ahc_ccsgctl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCSGCTL", 0xeb, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ccscbram_print; -#else -#define ahc_ccscbram_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCSCBRAM", 0xec, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ccscbaddr_print; -#else -#define ahc_ccscbaddr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCSCBADDR", 0xed, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ccscbctl_print; -#else -#define ahc_ccscbctl_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCSCBCTL", 0xee, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ccscbcnt_print; -#else -#define ahc_ccscbcnt_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCSCBCNT", 0xef, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_scbbaddr_print; -#else -#define ahc_scbbaddr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SCBBADDR", 0xf0, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_ccscbptr_print; -#else -#define ahc_ccscbptr_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "CCSCBPTR", 0xf1, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_hnscb_qoff_print; -#else -#define ahc_hnscb_qoff_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "HNSCB_QOFF", 0xf4, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_snscb_qoff_print; -#else -#define ahc_snscb_qoff_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SNSCB_QOFF", 0xf6, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_sdscb_qoff_print; -#else -#define ahc_sdscb_qoff_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SDSCB_QOFF", 0xf8, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_qoff_ctlsta_print; -#else -#define ahc_qoff_ctlsta_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "QOFF_CTLSTA", 0xfa, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_dff_thrsh_print; -#else -#define ahc_dff_thrsh_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "DFF_THRSH", 0xfb, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_sg_cache_shadow_print; -#else -#define ahc_sg_cache_shadow_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SG_CACHE_SHADOW", 0xfc, regvalue, cur_col, wrap) -#endif - -#if AIC_DEBUG_REGISTERS -ahc_reg_print_t ahc_sg_cache_pre_print; -#else -#define ahc_sg_cache_pre_print(regvalue, cur_col, wrap) \ - ahc_print_register(NULL, 0, "SG_CACHE_PRE", 0xfc, regvalue, cur_col, wrap) -#endif - #define SCSISEQ 0x00 #define TEMODE 0x80 diff --git a/drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped b/drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped index 309a562b009e..9f9b88047d0c 100644 --- a/drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped +++ b/drivers/scsi/aic7xxx/aic7xxx_reg_print.c_shipped @@ -43,48 +43,6 @@ ahc_sxfrctl0_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x01, regvalue, cur_col, wrap)); } -static const ahc_reg_parse_entry_t SXFRCTL1_parse_table[] = { - { "STPWEN", 0x01, 0x01 }, - { "ACTNEGEN", 0x02, 0x02 }, - { "ENSTIMER", 0x04, 0x04 }, - { "ENSPCHK", 0x20, 0x20 }, - { "SWRAPEN", 0x40, 0x40 }, - { "BITBUCKET", 0x80, 0x80 }, - { "STIMESEL", 0x18, 0x18 } -}; - -int -ahc_sxfrctl1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SXFRCTL1_parse_table, 7, "SXFRCTL1", - 0x02, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SCSISIGO_parse_table[] = { - { "ACKO", 0x01, 0x01 }, - { "REQO", 0x02, 0x02 }, - { "BSYO", 0x04, 0x04 }, - { "SELO", 0x08, 0x08 }, - { "ATNO", 0x10, 0x10 }, - { "MSGO", 0x20, 0x20 }, - { "IOO", 0x40, 0x40 }, - { "CDO", 0x80, 0x80 }, - { "P_DATAOUT", 0x00, 0x00 }, - { "P_DATAIN", 0x40, 0x40 }, - { "P_COMMAND", 0x80, 0x80 }, - { "P_MESGOUT", 0xa0, 0xa0 }, - { "P_STATUS", 0xc0, 0xc0 }, - { "PHASE_MASK", 0xe0, 0xe0 }, - { "P_MESGIN", 0xe0, 0xe0 } -}; - -int -ahc_scsisigo_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SCSISIGO_parse_table, 15, "SCSISIGO", - 0x03, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SCSISIGI_parse_table[] = { { "ACKI", 0x01, 0x01 }, { "REQI", 0x02, 0x02 }, @@ -128,77 +86,6 @@ ahc_scsirate_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x04, regvalue, cur_col, wrap)); } -static const ahc_reg_parse_entry_t SCSIID_parse_table[] = { - { "TWIN_CHNLB", 0x80, 0x80 }, - { "OID", 0x0f, 0x0f }, - { "TWIN_TID", 0x70, 0x70 }, - { "SOFS_ULTRA2", 0x7f, 0x7f }, - { "TID", 0xf0, 0xf0 } -}; - -int -ahc_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SCSIID_parse_table, 5, "SCSIID", - 0x05, regvalue, cur_col, wrap)); -} - -int -ahc_scsidatl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCSIDATL", - 0x06, regvalue, cur_col, wrap)); -} - -int -ahc_stcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "STCNT", - 0x08, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t OPTIONMODE_parse_table[] = { - { "DIS_MSGIN_DUALEDGE", 0x01, 0x01 }, - { "AUTO_MSGOUT_DE", 0x02, 0x02 }, - { "SCSIDATL_IMGEN", 0x04, 0x04 }, - { "EXPPHASEDIS", 0x08, 0x08 }, - { "BUSFREEREV", 0x10, 0x10 }, - { "ATNMGMNTEN", 0x20, 0x20 }, - { "AUTOACKEN", 0x40, 0x40 }, - { "AUTORATEEN", 0x80, 0x80 }, - { "OPTIONMODE_DEFAULTS",0x03, 0x03 } -}; - -int -ahc_optionmode_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(OPTIONMODE_parse_table, 9, "OPTIONMODE", - 0x08, regvalue, cur_col, wrap)); -} - -int -ahc_targcrccnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "TARGCRCCNT", - 0x0a, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t CLRSINT0_parse_table[] = { - { "CLRSPIORDY", 0x02, 0x02 }, - { "CLRSWRAP", 0x08, 0x08 }, - { "CLRIOERR", 0x08, 0x08 }, - { "CLRSELINGO", 0x10, 0x10 }, - { "CLRSELDI", 0x20, 0x20 }, - { "CLRSELDO", 0x40, 0x40 } -}; - -int -ahc_clrsint0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(CLRSINT0_parse_table, 6, "CLRSINT0", - 0x0b, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SSTAT0_parse_table[] = { { "DMADONE", 0x01, 0x01 }, { "SPIORDY", 0x02, 0x02 }, @@ -218,23 +105,6 @@ ahc_sstat0_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x0b, regvalue, cur_col, wrap)); } -static const ahc_reg_parse_entry_t CLRSINT1_parse_table[] = { - { "CLRREQINIT", 0x01, 0x01 }, - { "CLRPHASECHG", 0x02, 0x02 }, - { "CLRSCSIPERR", 0x04, 0x04 }, - { "CLRBUSFREE", 0x08, 0x08 }, - { "CLRSCSIRSTI", 0x20, 0x20 }, - { "CLRATNO", 0x40, 0x40 }, - { "CLRSELTIMEO", 0x80, 0x80 } -}; - -int -ahc_clrsint1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(CLRSINT1_parse_table, 7, "CLRSINT1", - 0x0c, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SSTAT1_parse_table[] = { { "REQINIT", 0x01, 0x01 }, { "PHASECHG", 0x02, 0x02 }, @@ -284,18 +154,6 @@ ahc_sstat3_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x0e, regvalue, cur_col, wrap)); } -static const ahc_reg_parse_entry_t SCSIID_ULTRA2_parse_table[] = { - { "OID", 0x0f, 0x0f }, - { "TID", 0xf0, 0xf0 } -}; - -int -ahc_scsiid_ultra2_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SCSIID_ULTRA2_parse_table, 2, "SCSIID_ULTRA2", - 0x0f, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SIMODE0_parse_table[] = { { "ENDMADONE", 0x01, 0x01 }, { "ENSPIORDY", 0x02, 0x02 }, @@ -339,107 +197,6 @@ ahc_scsibusl_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x12, regvalue, cur_col, wrap)); } -int -ahc_shaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SHADDR", - 0x14, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SELTIMER_parse_table[] = { - { "STAGE1", 0x01, 0x01 }, - { "STAGE2", 0x02, 0x02 }, - { "STAGE3", 0x04, 0x04 }, - { "STAGE4", 0x08, 0x08 }, - { "STAGE5", 0x10, 0x10 }, - { "STAGE6", 0x20, 0x20 } -}; - -int -ahc_seltimer_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SELTIMER_parse_table, 6, "SELTIMER", - 0x18, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SELID_parse_table[] = { - { "ONEBIT", 0x08, 0x08 }, - { "SELID_MASK", 0xf0, 0xf0 } -}; - -int -ahc_selid_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SELID_parse_table, 2, "SELID", - 0x19, regvalue, cur_col, wrap)); -} - -int -ahc_targid_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "TARGID", - 0x1b, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SPIOCAP_parse_table[] = { - { "SSPIOCPS", 0x01, 0x01 }, - { "ROM", 0x02, 0x02 }, - { "EEPROM", 0x04, 0x04 }, - { "SEEPROM", 0x08, 0x08 }, - { "EXT_BRDCTL", 0x10, 0x10 }, - { "SOFTCMDEN", 0x20, 0x20 }, - { "SOFT0", 0x40, 0x40 }, - { "SOFT1", 0x80, 0x80 } -}; - -int -ahc_spiocap_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SPIOCAP_parse_table, 8, "SPIOCAP", - 0x1b, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t BRDCTL_parse_table[] = { - { "BRDCTL0", 0x01, 0x01 }, - { "BRDSTB_ULTRA2", 0x01, 0x01 }, - { "BRDCTL1", 0x02, 0x02 }, - { "BRDRW_ULTRA2", 0x02, 0x02 }, - { "BRDRW", 0x04, 0x04 }, - { "BRDDAT2", 0x04, 0x04 }, - { "BRDCS", 0x08, 0x08 }, - { "BRDDAT3", 0x08, 0x08 }, - { "BRDSTB", 0x10, 0x10 }, - { "BRDDAT4", 0x10, 0x10 }, - { "BRDDAT5", 0x20, 0x20 }, - { "BRDDAT6", 0x40, 0x40 }, - { "BRDDAT7", 0x80, 0x80 } -}; - -int -ahc_brdctl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(BRDCTL_parse_table, 13, "BRDCTL", - 0x1d, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SEECTL_parse_table[] = { - { "SEEDI", 0x01, 0x01 }, - { "SEEDO", 0x02, 0x02 }, - { "SEECK", 0x04, 0x04 }, - { "SEECS", 0x08, 0x08 }, - { "SEERDY", 0x10, 0x10 }, - { "SEEMS", 0x20, 0x20 }, - { "EXTARBREQ", 0x40, 0x40 }, - { "EXTARBACK", 0x80, 0x80 } -}; - -int -ahc_seectl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SEECTL_parse_table, 8, "SEECTL", - 0x1e, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SBLKCTL_parse_table[] = { { "XCVR", 0x01, 0x01 }, { "SELWIDE", 0x02, 0x02 }, @@ -458,68 +215,6 @@ ahc_sblkctl_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x1f, regvalue, cur_col, wrap)); } -int -ahc_busy_targets_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "BUSY_TARGETS", - 0x20, regvalue, cur_col, wrap)); -} - -int -ahc_ultra_enb_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "ULTRA_ENB", - 0x30, regvalue, cur_col, wrap)); -} - -int -ahc_disc_dsb_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "DISC_DSB", - 0x32, regvalue, cur_col, wrap)); -} - -int -ahc_mwi_residual_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "MWI_RESIDUAL", - 0x38, regvalue, cur_col, wrap)); -} - -int -ahc_next_queued_scb_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "NEXT_QUEUED_SCB", - 0x39, regvalue, cur_col, wrap)); -} - -int -ahc_msg_out_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "MSG_OUT", - 0x3a, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t DMAPARAMS_parse_table[] = { - { "FIFORESET", 0x01, 0x01 }, - { "FIFOFLUSH", 0x02, 0x02 }, - { "DIRECTION", 0x04, 0x04 }, - { "HDMAEN", 0x08, 0x08 }, - { "HDMAENACK", 0x08, 0x08 }, - { "SDMAEN", 0x10, 0x10 }, - { "SDMAENACK", 0x10, 0x10 }, - { "SCSIEN", 0x20, 0x20 }, - { "WIDEODD", 0x40, 0x40 }, - { "PRELOADEN", 0x80, 0x80 } -}; - -int -ahc_dmaparams_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(DMAPARAMS_parse_table, 10, "DMAPARAMS", - 0x3b, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SEQ_FLAGS_parse_table[] = { { "NO_DISCONNECT", 0x01, 0x01 }, { "SPHASE_PENDING", 0x02, 0x02 }, @@ -539,20 +234,6 @@ ahc_seq_flags_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x3c, regvalue, cur_col, wrap)); } -int -ahc_saved_scsiid_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SAVED_SCSIID", - 0x3d, regvalue, cur_col, wrap)); -} - -int -ahc_saved_lun_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SAVED_LUN", - 0x3e, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t LASTPHASE_parse_table[] = { { "MSGI", 0x20, 0x20 }, { "IOI", 0x40, 0x40 }, @@ -574,193 +255,6 @@ ahc_lastphase_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x3f, regvalue, cur_col, wrap)); } -int -ahc_waiting_scbh_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "WAITING_SCBH", - 0x40, regvalue, cur_col, wrap)); -} - -int -ahc_disconnected_scbh_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "DISCONNECTED_SCBH", - 0x41, regvalue, cur_col, wrap)); -} - -int -ahc_free_scbh_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "FREE_SCBH", - 0x42, regvalue, cur_col, wrap)); -} - -int -ahc_hscb_addr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "HSCB_ADDR", - 0x44, regvalue, cur_col, wrap)); -} - -int -ahc_shared_data_addr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SHARED_DATA_ADDR", - 0x48, regvalue, cur_col, wrap)); -} - -int -ahc_kernel_qinpos_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "KERNEL_QINPOS", - 0x4c, regvalue, cur_col, wrap)); -} - -int -ahc_qinpos_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "QINPOS", - 0x4d, regvalue, cur_col, wrap)); -} - -int -ahc_qoutpos_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "QOUTPOS", - 0x4e, regvalue, cur_col, wrap)); -} - -int -ahc_kernel_tqinpos_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "KERNEL_TQINPOS", - 0x4f, regvalue, cur_col, wrap)); -} - -int -ahc_tqinpos_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "TQINPOS", - 0x50, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t ARG_1_parse_table[] = { - { "CONT_TARG_SESSION", 0x02, 0x02 }, - { "CONT_MSG_LOOP", 0x04, 0x04 }, - { "EXIT_MSG_LOOP", 0x08, 0x08 }, - { "MSGOUT_PHASEMIS", 0x10, 0x10 }, - { "SEND_REJ", 0x20, 0x20 }, - { "SEND_SENSE", 0x40, 0x40 }, - { "SEND_MSG", 0x80, 0x80 } -}; - -int -ahc_arg_1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(ARG_1_parse_table, 7, "ARG_1", - 0x51, regvalue, cur_col, wrap)); -} - -int -ahc_arg_2_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "ARG_2", - 0x52, regvalue, cur_col, wrap)); -} - -int -ahc_last_msg_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "LAST_MSG", - 0x53, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SCSISEQ_TEMPLATE_parse_table[] = { - { "ENAUTOATNP", 0x02, 0x02 }, - { "ENAUTOATNI", 0x04, 0x04 }, - { "ENAUTOATNO", 0x08, 0x08 }, - { "ENRSELI", 0x10, 0x10 }, - { "ENSELI", 0x20, 0x20 }, - { "ENSELO", 0x40, 0x40 } -}; - -int -ahc_scsiseq_template_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SCSISEQ_TEMPLATE_parse_table, 6, "SCSISEQ_TEMPLATE", - 0x54, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t HA_274_BIOSGLOBAL_parse_table[] = { - { "HA_274_EXTENDED_TRANS",0x01, 0x01 } -}; - -int -ahc_ha_274_biosglobal_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(HA_274_BIOSGLOBAL_parse_table, 1, "HA_274_BIOSGLOBAL", - 0x56, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SEQ_FLAGS2_parse_table[] = { - { "SCB_DMA", 0x01, 0x01 }, - { "TARGET_MSG_PENDING", 0x02, 0x02 } -}; - -int -ahc_seq_flags2_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SEQ_FLAGS2_parse_table, 2, "SEQ_FLAGS2", - 0x57, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SCSICONF_parse_table[] = { - { "ENSPCHK", 0x20, 0x20 }, - { "RESET_SCSI", 0x40, 0x40 }, - { "TERM_ENB", 0x80, 0x80 }, - { "HSCSIID", 0x07, 0x07 }, - { "HWSCSIID", 0x0f, 0x0f } -}; - -int -ahc_scsiconf_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SCSICONF_parse_table, 5, "SCSICONF", - 0x5a, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t INTDEF_parse_table[] = { - { "EDGE_TRIG", 0x80, 0x80 }, - { "VECTOR", 0x0f, 0x0f } -}; - -int -ahc_intdef_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(INTDEF_parse_table, 2, "INTDEF", - 0x5c, regvalue, cur_col, wrap)); -} - -int -ahc_hostconf_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "HOSTCONF", - 0x5d, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t HA_274_BIOSCTRL_parse_table[] = { - { "CHANNEL_B_PRIMARY", 0x08, 0x08 }, - { "BIOSMODE", 0x30, 0x30 }, - { "BIOSDISABLED", 0x30, 0x30 } -}; - -int -ahc_ha_274_biosctrl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(HA_274_BIOSCTRL_parse_table, 3, "HA_274_BIOSCTRL", - 0x5f, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SEQCTL_parse_table[] = { { "LOADRAM", 0x01, 0x01 }, { "SEQRESET", 0x02, 0x02 }, @@ -780,285 +274,12 @@ ahc_seqctl_print(u_int regvalue, u_int *cur_col, u_int wrap) } int -ahc_seqram_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SEQRAM", - 0x61, regvalue, cur_col, wrap)); -} - -int -ahc_seqaddr0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SEQADDR0", - 0x62, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SEQADDR1_parse_table[] = { - { "SEQADDR1_MASK", 0x01, 0x01 } -}; - -int -ahc_seqaddr1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SEQADDR1_parse_table, 1, "SEQADDR1", - 0x63, regvalue, cur_col, wrap)); -} - -int -ahc_accum_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "ACCUM", - 0x64, regvalue, cur_col, wrap)); -} - -int -ahc_sindex_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SINDEX", - 0x65, regvalue, cur_col, wrap)); -} - -int -ahc_dindex_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "DINDEX", - 0x66, regvalue, cur_col, wrap)); -} - -int -ahc_allones_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "ALLONES", - 0x69, regvalue, cur_col, wrap)); -} - -int -ahc_allzeros_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "ALLZEROS", - 0x6a, regvalue, cur_col, wrap)); -} - -int -ahc_none_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "NONE", - 0x6a, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t FLAGS_parse_table[] = { - { "CARRY", 0x01, 0x01 }, - { "ZERO", 0x02, 0x02 } -}; - -int -ahc_flags_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(FLAGS_parse_table, 2, "FLAGS", - 0x6b, regvalue, cur_col, wrap)); -} - -int -ahc_sindir_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SINDIR", - 0x6c, regvalue, cur_col, wrap)); -} - -int -ahc_dindir_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "DINDIR", - 0x6d, regvalue, cur_col, wrap)); -} - -int -ahc_stack_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "STACK", - 0x6f, regvalue, cur_col, wrap)); -} - -int -ahc_targ_offset_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "TARG_OFFSET", - 0x70, regvalue, cur_col, wrap)); -} - -int ahc_sram_base_print(u_int regvalue, u_int *cur_col, u_int wrap) { return (ahc_print_register(NULL, 0, "SRAM_BASE", 0x70, regvalue, cur_col, wrap)); } -static const ahc_reg_parse_entry_t DSCOMMAND0_parse_table[] = { - { "CIOPARCKEN", 0x01, 0x01 }, - { "USCBSIZE32", 0x02, 0x02 }, - { "RAMPS", 0x04, 0x04 }, - { "INTSCBRAMSEL", 0x08, 0x08 }, - { "EXTREQLCK", 0x10, 0x10 }, - { "MPARCKEN", 0x20, 0x20 }, - { "DPARCKEN", 0x40, 0x40 }, - { "CACHETHEN", 0x80, 0x80 } -}; - -int -ahc_dscommand0_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(DSCOMMAND0_parse_table, 8, "DSCOMMAND0", - 0x84, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t BUSTIME_parse_table[] = { - { "BON", 0x0f, 0x0f }, - { "BOFF", 0xf0, 0xf0 } -}; - -int -ahc_bustime_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(BUSTIME_parse_table, 2, "BUSTIME", - 0x85, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t DSCOMMAND1_parse_table[] = { - { "HADDLDSEL0", 0x01, 0x01 }, - { "HADDLDSEL1", 0x02, 0x02 }, - { "DSLATT", 0xfc, 0xfc } -}; - -int -ahc_dscommand1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(DSCOMMAND1_parse_table, 3, "DSCOMMAND1", - 0x85, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t BUSSPD_parse_table[] = { - { "STBON", 0x07, 0x07 }, - { "STBOFF", 0x38, 0x38 }, - { "DFTHRSH_75", 0x80, 0x80 }, - { "DFTHRSH", 0xc0, 0xc0 }, - { "DFTHRSH_100", 0xc0, 0xc0 } -}; - -int -ahc_busspd_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(BUSSPD_parse_table, 5, "BUSSPD", - 0x86, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t HS_MAILBOX_parse_table[] = { - { "SEQ_MAILBOX", 0x0f, 0x0f }, - { "HOST_TQINPOS", 0x80, 0x80 }, - { "HOST_MAILBOX", 0xf0, 0xf0 } -}; - -int -ahc_hs_mailbox_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(HS_MAILBOX_parse_table, 3, "HS_MAILBOX", - 0x86, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t DSPCISTATUS_parse_table[] = { - { "DFTHRSH_100", 0xc0, 0xc0 } -}; - -int -ahc_dspcistatus_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(DSPCISTATUS_parse_table, 1, "DSPCISTATUS", - 0x86, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t HCNTRL_parse_table[] = { - { "CHIPRST", 0x01, 0x01 }, - { "CHIPRSTACK", 0x01, 0x01 }, - { "INTEN", 0x02, 0x02 }, - { "PAUSE", 0x04, 0x04 }, - { "IRQMS", 0x08, 0x08 }, - { "SWINT", 0x10, 0x10 }, - { "POWRDN", 0x40, 0x40 } -}; - -int -ahc_hcntrl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(HCNTRL_parse_table, 7, "HCNTRL", - 0x87, regvalue, cur_col, wrap)); -} - -int -ahc_haddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "HADDR", - 0x88, regvalue, cur_col, wrap)); -} - -int -ahc_hcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "HCNT", - 0x8c, regvalue, cur_col, wrap)); -} - -int -ahc_scbptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCBPTR", - 0x90, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t INTSTAT_parse_table[] = { - { "SEQINT", 0x01, 0x01 }, - { "CMDCMPLT", 0x02, 0x02 }, - { "SCSIINT", 0x04, 0x04 }, - { "BRKADRINT", 0x08, 0x08 }, - { "BAD_PHASE", 0x01, 0x01 }, - { "INT_PEND", 0x0f, 0x0f }, - { "SEND_REJECT", 0x11, 0x11 }, - { "PROTO_VIOLATION", 0x21, 0x21 }, - { "NO_MATCH", 0x31, 0x31 }, - { "IGN_WIDE_RES", 0x41, 0x41 }, - { "PDATA_REINIT", 0x51, 0x51 }, - { "HOST_MSG_LOOP", 0x61, 0x61 }, - { "BAD_STATUS", 0x71, 0x71 }, - { "PERR_DETECTED", 0x81, 0x81 }, - { "DATA_OVERRUN", 0x91, 0x91 }, - { "MKMSG_FAILED", 0xa1, 0xa1 }, - { "MISSED_BUSFREE", 0xb1, 0xb1 }, - { "SCB_MISMATCH", 0xc1, 0xc1 }, - { "NO_FREE_SCB", 0xd1, 0xd1 }, - { "OUT_OF_RANGE", 0xe1, 0xe1 }, - { "SEQINT_MASK", 0xf1, 0xf1 } -}; - -int -ahc_intstat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(INTSTAT_parse_table, 21, "INTSTAT", - 0x91, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t CLRINT_parse_table[] = { - { "CLRSEQINT", 0x01, 0x01 }, - { "CLRCMDINT", 0x02, 0x02 }, - { "CLRSCSIINT", 0x04, 0x04 }, - { "CLRBRKADRINT", 0x08, 0x08 }, - { "CLRPARERR", 0x10, 0x10 } -}; - -int -ahc_clrint_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(CLRINT_parse_table, 5, "CLRINT", - 0x92, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t ERROR_parse_table[] = { { "ILLHADDR", 0x01, 0x01 }, { "ILLSADDR", 0x02, 0x02 }, @@ -1115,62 +336,6 @@ ahc_dfstatus_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x94, regvalue, cur_col, wrap)); } -int -ahc_dfwaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "DFWADDR", - 0x95, regvalue, cur_col, wrap)); -} - -int -ahc_dfdat_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "DFDAT", - 0x99, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SCBCNT_parse_table[] = { - { "SCBAUTO", 0x80, 0x80 }, - { "SCBCNT_MASK", 0x1f, 0x1f } -}; - -int -ahc_scbcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SCBCNT_parse_table, 2, "SCBCNT", - 0x9a, regvalue, cur_col, wrap)); -} - -int -ahc_qinfifo_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "QINFIFO", - 0x9b, regvalue, cur_col, wrap)); -} - -int -ahc_qoutfifo_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "QOUTFIFO", - 0x9d, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t CRCCONTROL1_parse_table[] = { - { "TARGCRCCNTEN", 0x04, 0x04 }, - { "TARGCRCENDEN", 0x08, 0x08 }, - { "CRCREQCHKEN", 0x10, 0x10 }, - { "CRCENDCHKEN", 0x20, 0x20 }, - { "CRCVALCHKEN", 0x40, 0x40 }, - { "CRCONSEEN", 0x80, 0x80 } -}; - -int -ahc_crccontrol1_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(CRCCONTROL1_parse_table, 6, "CRCCONTROL1", - 0x9d, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SCSIPHASE_parse_table[] = { { "DATA_OUT_PHASE", 0x01, 0x01 }, { "DATA_IN_PHASE", 0x02, 0x02 }, @@ -1188,17 +353,6 @@ ahc_scsiphase_print(u_int regvalue, u_int *cur_col, u_int wrap) 0x9e, regvalue, cur_col, wrap)); } -static const ahc_reg_parse_entry_t SFUNCT_parse_table[] = { - { "ALT_MODE", 0x80, 0x80 } -}; - -int -ahc_sfunct_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SFUNCT_parse_table, 1, "SFUNCT", - 0x9f, regvalue, cur_col, wrap)); -} - int ahc_scb_base_print(u_int regvalue, u_int *cur_col, u_int wrap) { @@ -1206,80 +360,6 @@ ahc_scb_base_print(u_int regvalue, u_int *cur_col, u_int wrap) 0xa0, regvalue, cur_col, wrap)); } -int -ahc_scb_cdb_ptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_CDB_PTR", - 0xa0, regvalue, cur_col, wrap)); -} - -int -ahc_scb_residual_sgptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_RESIDUAL_SGPTR", - 0xa4, regvalue, cur_col, wrap)); -} - -int -ahc_scb_scsi_status_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_SCSI_STATUS", - 0xa8, regvalue, cur_col, wrap)); -} - -int -ahc_scb_target_phases_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_TARGET_PHASES", - 0xa9, regvalue, cur_col, wrap)); -} - -int -ahc_scb_target_data_dir_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_TARGET_DATA_DIR", - 0xaa, regvalue, cur_col, wrap)); -} - -int -ahc_scb_target_itag_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_TARGET_ITAG", - 0xab, regvalue, cur_col, wrap)); -} - -int -ahc_scb_dataptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_DATAPTR", - 0xac, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SCB_DATACNT_parse_table[] = { - { "SG_LAST_SEG", 0x80, 0x80 }, - { "SG_HIGH_ADDR_BITS", 0x7f, 0x7f } -}; - -int -ahc_scb_datacnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SCB_DATACNT_parse_table, 2, "SCB_DATACNT", - 0xb0, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SCB_SGPTR_parse_table[] = { - { "SG_LIST_NULL", 0x01, 0x01 }, - { "SG_FULL_RESID", 0x02, 0x02 }, - { "SG_RESID_VALID", 0x04, 0x04 } -}; - -int -ahc_scb_sgptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SCB_SGPTR_parse_table, 3, "SCB_SGPTR", - 0xb4, regvalue, cur_col, wrap)); -} - static const ahc_reg_parse_entry_t SCB_CONTROL_parse_table[] = { { "DISCONNECTED", 0x04, 0x04 }, { "ULTRAENB", 0x08, 0x08 }, @@ -1331,248 +411,3 @@ ahc_scb_tag_print(u_int regvalue, u_int *cur_col, u_int wrap) 0xbb, regvalue, cur_col, wrap)); } -int -ahc_scb_cdb_len_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_CDB_LEN", - 0xbc, regvalue, cur_col, wrap)); -} - -int -ahc_scb_scsirate_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_SCSIRATE", - 0xbd, regvalue, cur_col, wrap)); -} - -int -ahc_scb_scsioffset_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_SCSIOFFSET", - 0xbe, regvalue, cur_col, wrap)); -} - -int -ahc_scb_next_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_NEXT", - 0xbf, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SEECTL_2840_parse_table[] = { - { "DO_2840", 0x01, 0x01 }, - { "CK_2840", 0x02, 0x02 }, - { "CS_2840", 0x04, 0x04 } -}; - -int -ahc_seectl_2840_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SEECTL_2840_parse_table, 3, "SEECTL_2840", - 0xc0, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t STATUS_2840_parse_table[] = { - { "DI_2840", 0x01, 0x01 }, - { "EEPROM_TF", 0x80, 0x80 }, - { "ADSEL", 0x1e, 0x1e }, - { "BIOS_SEL", 0x60, 0x60 } -}; - -int -ahc_status_2840_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(STATUS_2840_parse_table, 4, "STATUS_2840", - 0xc1, regvalue, cur_col, wrap)); -} - -int -ahc_scb_64_btt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCB_64_BTT", - 0xd0, regvalue, cur_col, wrap)); -} - -int -ahc_cchaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "CCHADDR", - 0xe0, regvalue, cur_col, wrap)); -} - -int -ahc_cchcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "CCHCNT", - 0xe8, regvalue, cur_col, wrap)); -} - -int -ahc_ccsgram_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "CCSGRAM", - 0xe9, regvalue, cur_col, wrap)); -} - -int -ahc_ccsgaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "CCSGADDR", - 0xea, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t CCSGCTL_parse_table[] = { - { "CCSGRESET", 0x01, 0x01 }, - { "SG_FETCH_NEEDED", 0x02, 0x02 }, - { "CCSGEN", 0x08, 0x08 }, - { "CCSGDONE", 0x80, 0x80 } -}; - -int -ahc_ccsgctl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(CCSGCTL_parse_table, 4, "CCSGCTL", - 0xeb, regvalue, cur_col, wrap)); -} - -int -ahc_ccscbram_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "CCSCBRAM", - 0xec, regvalue, cur_col, wrap)); -} - -int -ahc_ccscbaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "CCSCBADDR", - 0xed, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t CCSCBCTL_parse_table[] = { - { "CCSCBRESET", 0x01, 0x01 }, - { "CCSCBDIR", 0x04, 0x04 }, - { "CCSCBEN", 0x08, 0x08 }, - { "CCARREN", 0x10, 0x10 }, - { "ARRDONE", 0x40, 0x40 }, - { "CCSCBDONE", 0x80, 0x80 } -}; - -int -ahc_ccscbctl_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(CCSCBCTL_parse_table, 6, "CCSCBCTL", - 0xee, regvalue, cur_col, wrap)); -} - -int -ahc_ccscbcnt_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "CCSCBCNT", - 0xef, regvalue, cur_col, wrap)); -} - -int -ahc_scbbaddr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SCBBADDR", - 0xf0, regvalue, cur_col, wrap)); -} - -int -ahc_ccscbptr_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "CCSCBPTR", - 0xf1, regvalue, cur_col, wrap)); -} - -int -ahc_hnscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "HNSCB_QOFF", - 0xf4, regvalue, cur_col, wrap)); -} - -int -ahc_snscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SNSCB_QOFF", - 0xf6, regvalue, cur_col, wrap)); -} - -int -ahc_sdscb_qoff_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(NULL, 0, "SDSCB_QOFF", - 0xf8, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t QOFF_CTLSTA_parse_table[] = { - { "SDSCB_ROLLOVER", 0x10, 0x10 }, - { "SNSCB_ROLLOVER", 0x20, 0x20 }, - { "SCB_AVAIL", 0x40, 0x40 }, - { "SCB_QSIZE_256", 0x06, 0x06 }, - { "SCB_QSIZE", 0x07, 0x07 } -}; - -int -ahc_qoff_ctlsta_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(QOFF_CTLSTA_parse_table, 5, "QOFF_CTLSTA", - 0xfa, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t DFF_THRSH_parse_table[] = { - { "RD_DFTHRSH_MIN", 0x00, 0x00 }, - { "WR_DFTHRSH_MIN", 0x00, 0x00 }, - { "RD_DFTHRSH_25", 0x01, 0x01 }, - { "RD_DFTHRSH_50", 0x02, 0x02 }, - { "RD_DFTHRSH_63", 0x03, 0x03 }, - { "RD_DFTHRSH_75", 0x04, 0x04 }, - { "RD_DFTHRSH_85", 0x05, 0x05 }, - { "RD_DFTHRSH_90", 0x06, 0x06 }, - { "RD_DFTHRSH", 0x07, 0x07 }, - { "RD_DFTHRSH_MAX", 0x07, 0x07 }, - { "WR_DFTHRSH_25", 0x10, 0x10 }, - { "WR_DFTHRSH_50", 0x20, 0x20 }, - { "WR_DFTHRSH_63", 0x30, 0x30 }, - { "WR_DFTHRSH_75", 0x40, 0x40 }, - { "WR_DFTHRSH_85", 0x50, 0x50 }, - { "WR_DFTHRSH_90", 0x60, 0x60 }, - { "WR_DFTHRSH", 0x70, 0x70 }, - { "WR_DFTHRSH_MAX", 0x70, 0x70 } -}; - -int -ahc_dff_thrsh_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(DFF_THRSH_parse_table, 18, "DFF_THRSH", - 0xfb, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SG_CACHE_SHADOW_parse_table[] = { - { "LAST_SEG_DONE", 0x01, 0x01 }, - { "LAST_SEG", 0x02, 0x02 }, - { "SG_ADDR_MASK", 0xf8, 0xf8 } -}; - -int -ahc_sg_cache_shadow_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SG_CACHE_SHADOW_parse_table, 3, "SG_CACHE_SHADOW", - 0xfc, regvalue, cur_col, wrap)); -} - -static const ahc_reg_parse_entry_t SG_CACHE_PRE_parse_table[] = { - { "LAST_SEG_DONE", 0x01, 0x01 }, - { "LAST_SEG", 0x02, 0x02 }, - { "SG_ADDR_MASK", 0xf8, 0xf8 } -}; - -int -ahc_sg_cache_pre_print(u_int regvalue, u_int *cur_col, u_int wrap) -{ - return (ahc_print_register(SG_CACHE_PRE_parse_table, 3, "SG_CACHE_PRE", - 0xfc, regvalue, cur_col, wrap)); -} - diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y index 81be6a261cc8..e4064433842e 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_gram.y @@ -147,6 +147,8 @@ void yyerror(const char *string); %token T_ACCESS_MODE +%token T_DONT_GENERATE_DEBUG_CODE + %token T_MODES %token T_DEFINE @@ -357,6 +359,7 @@ reg_attribute: | size | count | access_mode +| dont_generate_debug_code | modes | field_defn | enum_defn @@ -410,6 +413,13 @@ access_mode: } ; +dont_generate_debug_code: + T_DONT_GENERATE_DEBUG_CODE + { + cur_symbol->dont_generate_debug_code = 1; + } +; + modes: T_MODES mode_list { diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l index 2c7f02daf88d..93c8667cd704 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_scan.l @@ -164,6 +164,7 @@ download { return T_DOWNLOAD; } address { return T_ADDRESS; } count { return T_COUNT; } access_mode { return T_ACCESS_MODE; } +dont_generate_debug_code { return T_DONT_GENERATE_DEBUG_CODE; } modes { return T_MODES; } RW|RO|WO { if (strcmp(yytext, "RW") == 0) diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c index fcd357872b43..078ed600f47a 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.c @@ -539,6 +539,9 @@ symtable_dump(FILE *ofile, FILE *dfile) aic_print_include(dfile, stock_include_file); SLIST_FOREACH(curnode, ®isters, links) { + if (curnode->symbol->dont_generate_debug_code) + continue; + switch(curnode->symbol->type) { case REGISTER: case SCBLOC: diff --git a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h index 05190c1a2fb7..2ba73ae7c777 100644 --- a/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h +++ b/drivers/scsi/aic7xxx/aicasm/aicasm_symbol.h @@ -137,7 +137,8 @@ typedef struct symbol { struct label_info *linfo; struct cond_info *condinfo; struct macro_info *macroinfo; - }info; + } info; + int dont_generate_debug_code; } symbol_t; typedef struct symbol_ref { diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c index a43c3ed4df28..3d50cabca7ee 100644 --- a/drivers/scsi/device_handler/scsi_dh_rdac.c +++ b/drivers/scsi/device_handler/scsi_dh_rdac.c @@ -401,6 +401,9 @@ static int check_ownership(struct scsi_device *sdev, struct rdac_dh_data *h) } } + if (h->lun_state == RDAC_LUN_UNOWNED) + h->state = RDAC_STATE_PASSIVE; + return err; } diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c index 098739deb02e..ded854a6dd35 100644 --- a/drivers/scsi/ipr.c +++ b/drivers/scsi/ipr.c @@ -2456,20 +2456,14 @@ static ssize_t ipr_read_trace(struct kobject *kobj, struct Scsi_Host *shost = class_to_shost(dev); struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)shost->hostdata; unsigned long lock_flags = 0; - int size = IPR_TRACE_SIZE; - char *src = (char *)ioa_cfg->trace; - - if (off > size) - return 0; - if (off + count > size) { - size -= off; - count = size; - } + ssize_t ret; spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags); - memcpy(buf, &src[off], count); + ret = memory_read_from_buffer(buf, count, &off, ioa_cfg->trace, + IPR_TRACE_SIZE); spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags); - return count; + + return ret; } static struct bin_attribute ipr_trace_attr = { diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index e5a9526d2037..f5d3b96890dc 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -529,6 +529,14 @@ static void scsi_single_lun_run(struct scsi_device *current_sdev) spin_unlock_irqrestore(shost->host_lock, flags); } +static inline int scsi_device_is_busy(struct scsi_device *sdev) +{ + if (sdev->device_busy >= sdev->queue_depth || sdev->device_blocked) + return 1; + + return 0; +} + static inline int scsi_target_is_busy(struct scsi_target *starget) { return ((starget->can_queue > 0 && @@ -536,6 +544,15 @@ static inline int scsi_target_is_busy(struct scsi_target *starget) starget->target_blocked); } +static inline int scsi_host_is_busy(struct Scsi_Host *shost) +{ + if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) || + shost->host_blocked || shost->host_self_blocked) + return 1; + + return 0; +} + /* * Function: scsi_run_queue() * @@ -558,11 +575,7 @@ static void scsi_run_queue(struct request_queue *q) scsi_single_lun_run(sdev); spin_lock_irqsave(shost->host_lock, flags); - while (!list_empty(&shost->starved_list) && - !shost->host_blocked && !shost->host_self_blocked && - !((shost->can_queue > 0) && - (shost->host_busy >= shost->can_queue))) { - + while (!list_empty(&shost->starved_list) && !scsi_host_is_busy(shost)) { int flagset; /* @@ -1348,8 +1361,6 @@ int scsi_prep_fn(struct request_queue *q, struct request *req) static inline int scsi_dev_queue_ready(struct request_queue *q, struct scsi_device *sdev) { - if (sdev->device_busy >= sdev->queue_depth) - return 0; if (sdev->device_busy == 0 && sdev->device_blocked) { /* * unblock after device_blocked iterates to zero @@ -1363,7 +1374,7 @@ static inline int scsi_dev_queue_ready(struct request_queue *q, return 0; } } - if (sdev->device_blocked) + if (scsi_device_is_busy(sdev)) return 0; return 1; @@ -1440,8 +1451,7 @@ static inline int scsi_host_queue_ready(struct request_queue *q, return 0; } } - if ((shost->can_queue > 0 && shost->host_busy >= shost->can_queue) || - shost->host_blocked || shost->host_self_blocked) { + if (scsi_host_is_busy(shost)) { if (list_empty(&sdev->starved_entry)) list_add_tail(&sdev->starved_entry, &shost->starved_list); return 0; @@ -1455,6 +1465,37 @@ static inline int scsi_host_queue_ready(struct request_queue *q, } /* + * Busy state exporting function for request stacking drivers. + * + * For efficiency, no lock is taken to check the busy state of + * shost/starget/sdev, since the returned value is not guaranteed and + * may be changed after request stacking drivers call the function, + * regardless of taking lock or not. + * + * When scsi can't dispatch I/Os anymore and needs to kill I/Os + * (e.g. !sdev), scsi needs to return 'not busy'. + * Otherwise, request stacking drivers may hold requests forever. + */ +static int scsi_lld_busy(struct request_queue *q) +{ + struct scsi_device *sdev = q->queuedata; + struct Scsi_Host *shost; + struct scsi_target *starget; + + if (!sdev) + return 0; + + shost = sdev->host; + starget = scsi_target(sdev); + + if (scsi_host_in_recovery(shost) || scsi_host_is_busy(shost) || + scsi_target_is_busy(starget) || scsi_device_is_busy(sdev)) + return 1; + + return 0; +} + +/* * Kill a request for a dead device */ static void scsi_kill_request(struct request *req, struct request_queue *q) @@ -1757,6 +1798,7 @@ struct request_queue *scsi_alloc_queue(struct scsi_device *sdev) blk_queue_prep_rq(q, scsi_prep_fn); blk_queue_softirq_done(q, scsi_softirq_done); blk_queue_rq_timed_out(q, scsi_times_out); + blk_queue_lld_busy(q, scsi_lld_busy); return q; } @@ -2105,22 +2147,21 @@ scsi_test_unit_ready(struct scsi_device *sdev, int timeout, int retries, do { result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, timeout, retries); - } while ((driver_byte(result) & DRIVER_SENSE) && - sshdr && sshdr->sense_key == UNIT_ATTENTION && - --retries); + if (sdev->removable && scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION) + sdev->changed = 1; + } while (scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION && --retries); if (!sshdr) /* could not allocate sense buffer, so can't process it */ return result; - if ((driver_byte(result) & DRIVER_SENSE) && sdev->removable) { - - if ((scsi_sense_valid(sshdr)) && - ((sshdr->sense_key == UNIT_ATTENTION) || - (sshdr->sense_key == NOT_READY))) { - sdev->changed = 1; - result = 0; - } + if (sdev->removable && scsi_sense_valid(sshdr) && + (sshdr->sense_key == UNIT_ATTENTION || + sshdr->sense_key == NOT_READY)) { + sdev->changed = 1; + result = 0; } if (!sshdr_external) kfree(sshdr); diff --git a/drivers/scsi/scsi_netlink.c b/drivers/scsi/scsi_netlink.c index b37e133de805..723fdecd91bd 100644 --- a/drivers/scsi/scsi_netlink.c +++ b/drivers/scsi/scsi_netlink.c @@ -205,16 +205,13 @@ static struct notifier_block scsi_netlink_notifier = { }; -/** +/* * GENERIC SCSI transport receive and event handlers - **/ + */ /** - * scsi_generic_msg_handler - receive message handler for GENERIC transport - * messages - * + * scsi_generic_msg_handler - receive message handler for GENERIC transport messages * @skb: socket receive buffer - * **/ static int scsi_generic_msg_handler(struct sk_buff *skb) diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c index 43f34c73df12..c9e1242eaf25 100644 --- a/drivers/scsi/sd.c +++ b/drivers/scsi/sd.c @@ -1049,7 +1049,6 @@ static int sd_done(struct scsi_cmnd *SCpnt) good_bytes = sd_completed_bytes(SCpnt); break; case RECOVERED_ERROR: - case NO_SENSE: /* Inform the user, but make sure that it's not treated * as a hard error. */ @@ -1058,6 +1057,15 @@ static int sd_done(struct scsi_cmnd *SCpnt) memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); good_bytes = scsi_bufflen(SCpnt); break; + case NO_SENSE: + /* This indicates a false check condition, so ignore it. An + * unknown amount of data was transferred so treat it as an + * error. + */ + scsi_print_sense("sd", SCpnt); + SCpnt->result = 0; + memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE); + break; case ABORTED_COMMAND: if (sshdr.asc == 0x10) { /* DIF: Disk detected corruption */ scsi_print_result(SCpnt); @@ -1071,15 +1079,6 @@ static int sd_done(struct scsi_cmnd *SCpnt) scsi_print_sense("sd", SCpnt); good_bytes = sd_completed_bytes(SCpnt); } - if (!scsi_device_protection(SCpnt->device) && - SCpnt->device->use_10_for_rw && - (SCpnt->cmnd[0] == READ_10 || - SCpnt->cmnd[0] == WRITE_10)) - SCpnt->device->use_10_for_rw = 0; - if (SCpnt->device->use_10_for_ms && - (SCpnt->cmnd[0] == MODE_SENSE_10 || - SCpnt->cmnd[0] == MODE_SELECT_10)) - SCpnt->device->use_10_for_ms = 0; break; default: break; @@ -1432,7 +1431,7 @@ got_data: { char cap_str_2[10], cap_str_10[10]; - u64 sz = sdkp->capacity << ffz(~sector_size); + u64 sz = (u64)sdkp->capacity << ilog2(sector_size); string_get_size(sz, STRING_UNITS_2, cap_str_2, sizeof(cap_str_2)); diff --git a/drivers/scsi/sun3x_esp.c b/drivers/scsi/sun3x_esp.c index 7514b3a0390e..34a99620e5bd 100644 --- a/drivers/scsi/sun3x_esp.c +++ b/drivers/scsi/sun3x_esp.c @@ -213,7 +213,7 @@ static int __devinit esp_sun3x_probe(struct platform_device *dev) esp->ops = &sun3x_esp_ops; res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res && !res->start) + if (!res || !res->start) goto fail_unlink; esp->regs = ioremap_nocache(res->start, 0x20); @@ -221,7 +221,7 @@ static int __devinit esp_sun3x_probe(struct platform_device *dev) goto fail_unmap_regs; res = platform_get_resource(dev, IORESOURCE_MEM, 1); - if (!res && !res->start) + if (!res || !res->start) goto fail_unmap_regs; esp->dma_regs = ioremap_nocache(res->start, 0x10); diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index c4eff44c9f27..e1654f59eb70 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -43,8 +43,6 @@ source "drivers/staging/echo/Kconfig" source "drivers/staging/at76_usb/Kconfig" -source "drivers/staging/pcc-acpi/Kconfig" - source "drivers/staging/poch/Kconfig" endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 7cb8701d96d4..71c4d53760b8 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -13,5 +13,4 @@ obj-$(CONFIG_W35UND) += winbond/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_USB_ATMEL) += at76_usb/ -obj-$(CONFIG_PCC_ACPI) += pcc-acpi/ obj-$(CONFIG_POCH) += poch/ diff --git a/drivers/staging/pcc-acpi/Kconfig b/drivers/staging/pcc-acpi/Kconfig deleted file mode 100644 index 6720d4086baf..000000000000 --- a/drivers/staging/pcc-acpi/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -config PCC_ACPI - tristate "Panasonic ACPI Hotkey support" - depends on ACPI - default n - ---help--- - This driver provides support for Panasonic hotkeys through the - ACPI interface. This works for the Panasonic R1 (N variant), - R2, R3, T2, W2, and Y2 laptops. - - To compile this driver as a module, choose M here. The module - will be called pcc-acpi. diff --git a/drivers/staging/pcc-acpi/Makefile b/drivers/staging/pcc-acpi/Makefile deleted file mode 100644 index f93b29edf61e..000000000000 --- a/drivers/staging/pcc-acpi/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_PCC_ACPI) += pcc-acpi.o diff --git a/drivers/staging/pcc-acpi/TODO b/drivers/staging/pcc-acpi/TODO deleted file mode 100644 index fab240982286..000000000000 --- a/drivers/staging/pcc-acpi/TODO +++ /dev/null @@ -1,7 +0,0 @@ -TODO: - - Lindent fixes - - checkpatch.pl fixes - - verify that the acpi interface is correct - - remove /proc dependancy if needed (not sure yet.) - -Please send any patches for this driver to Greg Kroah-Hartman <greg@kroah.com> diff --git a/drivers/staging/pcc-acpi/pcc-acpi.c b/drivers/staging/pcc-acpi/pcc-acpi.c deleted file mode 100644 index 3b34a3e4885a..000000000000 --- a/drivers/staging/pcc-acpi/pcc-acpi.c +++ /dev/null @@ -1,1111 +0,0 @@ -/* - * Panasonic HotKey and lcd brightness control Extra driver - * (C) 2004 Hiroshi Miura <miura@da-cha.org> - * (C) 2004 NTT DATA Intellilink Co. http://www.intellilink.co.jp/ - * (C) YOKOTA Hiroshi <yokota (at) netlab. is. tsukuba. ac. jp> - * (C) 2004 David Bronaugh <dbronaugh> - * - * derived from toshiba_acpi.c, Copyright (C) 2002-2004 John Belmonte - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * publicshed by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - *--------------------------------------------------------------------------- - * - * ChangeLog: - * - * Nov.04, 2006 Hiroshi Miura <miura@da-cha.org> - * -v0.9 remove warning about section reference. - * remove acpi_os_free - * add /proc/acpi/pcc/brightness interface to - * allow HAL to access. - * merge dbronaugh's enhancement - * Aug.17, 2004 David Bronaugh (dbronaugh) - * - Added screen brightness setting interface - * Thanks to the FreeBSD crew - * (acpi_panasonic.c authors) - * for the ideas I needed to accomplish it - * - * May.29, 2006 Hiroshi Miura <miura@da-cha.org> - * -v0.8.4 follow to change keyinput structure - * thanks Fabian Yamaguchi <fabs@cs.tu-berlin.de>, - * Jacob Bower <jacob.bower@ic.ac.uk> and - * Hiroshi Yokota for providing solutions. - * - * Oct.02, 2004 Hiroshi Miura <miura@da-cha.org> - * -v0.8.2 merge code of YOKOTA Hiroshi - * <yokota@netlab.is.tsukuba.ac.jp>. - * Add sticky key mode interface. - * Refactoring acpi_pcc_generete_keyinput(). - * - * Sep.15, 2004 Hiroshi Miura <miura@da-cha.org> - * -v0.8 Generate key input event on input subsystem. - * This is based on yet another driver - * written by Ryuta Nakanishi. - * - * Sep.10, 2004 Hiroshi Miura <miura@da-cha.org> - * -v0.7 Change proc interface functions using seq_file - * facility as same as other ACPI drivers. - * - * Aug.28, 2004 Hiroshi Miura <miura@da-cha.org> - * -v0.6.4 Fix a silly error with status checking - * - * Aug.25, 2004 Hiroshi Miura <miura@da-cha.org> - * -v0.6.3 replace read_acpi_int by standard - * function acpi_evaluate_integer - * some clean up and make smart copyright notice. - * fix return value of pcc_acpi_get_key() - * fix checking return value of acpi_bus_register_driver() - * - * Aug.22, 2004 David Bronaugh <dbronaugh@linuxboxen.org> - * -v0.6.2 Add check on ACPI data (num_sifr) - * Coding style cleanups, better error messages/handling - * Fixed an off-by-one error in memory allocation - * - * Aug.21, 2004 David Bronaugh <dbronaugh@linuxboxen.org> - * -v0.6.1 Fix a silly error with status checking - * - * Aug.20, 2004 David Bronaugh <dbronaugh@linuxboxen.org> - * - v0.6 Correct brightness controls to reflect reality - * based on information gleaned by Hiroshi Miura - * and discussions with Hiroshi Miura - * - * Aug.10, 2004 Hiroshi Miura <miura@da-cha.org> - * - v0.5 support LCD brightness control - * based on the disclosed information by MEI. - * - * Jul.25, 2004 Hiroshi Miura <miura@da-cha.org> - * - v0.4 first post version - * add function to retrive SIFR - * - * Jul.24, 2004 Hiroshi Miura <miura@da-cha.org> - * - v0.3 get proper status of hotkey - * - * Jul.22, 2004 Hiroshi Miura <miura@da-cha.org> - * - v0.2 add HotKey handler - * - * Jul.17, 2004 Hiroshi Miura <miura@da-cha.org> - * - v0.1 start from toshiba_acpi driver written by John Belmonte - * - */ - -#define ACPI_PCC_VERSION "0.9+hy" - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/ctype.h> -#include <linux/init.h> -#include <linux/input.h> -#include <linux/proc_fs.h> -#include <linux/seq_file.h> -#include <linux/slab.h> -#include <linux/uaccess.h> -#include <acpi/acpi_bus.h> -#include <acpi/acpi_drivers.h> - - -/************************************************************************* - * "seq" file template definition. - */ -/* "seq" initializer */ -#define SEQ_OPEN_FS(_open_func_name_, _show_func_name_) \ -static int _open_func_name_(struct inode *inode, struct file *file) \ -{ \ - return single_open(file, _show_func_name_, PDE(inode)->data); \ -} - -/*------------------------------------------------------------------------- - * "seq" fops template for read-only files. - */ -#define SEQ_FILEOPS_R(_open_func_name_) \ -{ \ - .open = _open_func_name_, \ - .read = seq_read, \ - .llseek = seq_lseek, \ - .release = single_release, \ -} - -/*------------------------------------------------------------------------ - * "seq" fops template for read-write files. - */ -#define SEQ_FILEOPS_RW(_open_func_name_, _write_func_name_) \ -{ \ - .open = _open_func_name_ , \ - .read = seq_read, \ - .write = _write_func_name_, \ - .llseek = seq_lseek, \ - .release = single_release, \ -} - -/* - * "seq" file template definition ended. - *************************************************************************** - */ -#ifndef ACPI_HOTKEY_COMPONENT -#define ACPI_HOTKEY_COMPONENT 0x10000000 -#endif - -#define _COMPONENT ACPI_HOTKEY_COMPONENT -ACPI_MODULE_NAME("pcc_acpi"); - -MODULE_AUTHOR("Hiroshi Miura, Hiroshi Yokota"); -MODULE_DESCRIPTION("ACPI HotKey driver for Panasonic Let's Note laptops"); -MODULE_LICENSE("GPL"); - -#define LOGPREFIX "pcc_acpi: " - -/**************************************************** - * Define ACPI PATHs - ****************************************************/ -/* Lets note hotkeys */ -#define METHOD_HKEY_QUERY "HINF" -#define METHOD_HKEY_SQTY "SQTY" -#define METHOD_HKEY_SINF "SINF" -#define METHOD_HKEY_SSET "SSET" -#define HKEY_NOTIFY 0x80 - -/* for brightness control */ -#define LCD_MAX_BRIGHTNESS 255 -/* This may be magical -- beware */ -#define LCD_BRIGHTNESS_INCREMENT 17 -/* Registers of SINF */ -#define SINF_LCD_BRIGHTNESS 4 - -/******************************************************************* - * - * definitions for /proc/ interface - * - *******************************************************************/ -#define ACPI_PCC_DRIVER_NAME "pcc_acpi" -#define ACPI_PCC_DEVICE_NAME "PCCExtra" -#define ACPI_PCC_CLASS "pcc" -#define PROC_PCC ACPI_PCC_CLASS - -#define ACPI_PCC_INPUT_PHYS "panasonic/hkey0" - -/* This is transitional definition */ -#ifndef KEY_BATT -# define KEY_BATT 227 -#endif - -#define PROC_STR_MAX_LEN 8 - -#define BUS_PCC_HOTKEY BUS_I8042 /*0x1a*/ /* FIXME: BUS_I8042? */ - -/* Fn+F4/F5 confricts with Shift+F1/F2 */ -/* This hack avoids key number confrict */ -#define PCC_KEYINPUT_MODE (0) - -/* LCD_TYPEs: 0 = Normal, 1 = Semi-transparent - ENV_STATEs: Normal temp=0x01, High temp=0x81, N/A=0x00 -*/ -enum SINF_BITS { SINF_NUM_BATTERIES = 0, - SINF_LCD_TYPE, - SINF_AC_MAX_BRIGHT, - SINF_AC_MIN_BRIGHT, - SINF_AC_CUR_BRIGHT, - /* 4 = R1 only handle SINF_AC_CUR_BRIGHT - * as SINF_CUR_BRIGHT and don't know AC state */ - SINF_DC_MAX_BRIGHT, - SINF_DC_MIN_BRIGHT, - SINF_DC_CUR_BRIGHT, - SINF_MUTE, - SINF_RESERVED, - SINF_ENV_STATE, /* 10 */ - SINF_STICKY_KEY = 0x80, -}; - -static struct acpi_device_id pcc_device_ids[] = { - {"MAT0012", 0}, - {"MAT0013", 0}, - {"MAT0018", 0}, - {"MAT0019", 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, pcc_device_ids); - - -static int __devinit acpi_pcc_hotkey_add(struct acpi_device *device); -static int __devexit acpi_pcc_hotkey_remove(struct acpi_device *device, - int type); -static int acpi_pcc_hotkey_resume(struct acpi_device *device); - - -static struct acpi_driver acpi_pcc_driver = { - .name = ACPI_PCC_DRIVER_NAME, - .class = ACPI_PCC_CLASS, - .ids = pcc_device_ids, - .ops = { - .add = acpi_pcc_hotkey_add, - .remove = __devexit_p(acpi_pcc_hotkey_remove), -#ifdef CONFIG_PM - /*.suspend = acpi_pcc_hotkey_suspend,*/ - .resume = acpi_pcc_hotkey_resume, -#endif - }, -}; - -struct acpi_hotkey { - acpi_handle handle; - struct acpi_device *device; - struct proc_dir_entry *proc_dir_entry; - unsigned long num_sifr; - unsigned long status; - struct input_dev *input_dev; - int sticky_mode; -}; - -struct pcc_keyinput { - struct acpi_hotkey *hotkey; - int key_mode; -}; - -/* ************************************************************************* - Hotkey driver core - ************************************************************************* */ -/* ------------------------------------------------------------------------- - method access functions - ------------------------------------------------------------------------- */ -static int acpi_pcc_write_sset(struct acpi_hotkey *hotkey, int func, int val) -{ - union acpi_object in_objs[] = { - { .integer.type = ACPI_TYPE_INTEGER, - .integer.value = func, }, - { .integer.type = ACPI_TYPE_INTEGER, - .integer.value = val, }, - }; - struct acpi_object_list params = { - .count = ARRAY_SIZE(in_objs), - .pointer = in_objs, - }; - acpi_status status; - - ACPI_FUNCTION_TRACE("acpi_pcc_write_sset"); - - status = acpi_evaluate_object(hotkey->handle, METHOD_HKEY_SSET, - ¶ms, NULL); - - return_VALUE(status == AE_OK ? AE_OK : AE_ERROR); -} - -static inline int acpi_pcc_get_sqty(struct acpi_device *device) -{ - unsigned long s; - acpi_status status; - - ACPI_FUNCTION_TRACE("acpi_pcc_get_sqty"); - - status = acpi_evaluate_integer(device->handle, METHOD_HKEY_SQTY, - NULL, &s); - if (ACPI_SUCCESS(status)) { - return_VALUE(s); - } else { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "evaluation error HKEY.SQTY\n")); - return_VALUE(-EINVAL); - } -} - -static int acpi_pcc_retrieve_biosdata(struct acpi_hotkey *hotkey, u32 *sinf) -{ - acpi_status status; - struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; - union acpi_object *hkey = NULL; - int i; - - ACPI_FUNCTION_TRACE("acpi_pcc_retrieve_biosdata"); - - status = acpi_evaluate_object(hotkey->handle, METHOD_HKEY_SINF, 0, - &buffer); - if (ACPI_FAILURE(status)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "evaluation error HKEY.SINF\n")); - status = AE_ERROR; - return_VALUE(status); - } - - hkey = buffer.pointer; - if (!hkey || (hkey->type != ACPI_TYPE_PACKAGE)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid HKEY.SINF\n")); - goto free_buffer; - } - - if (hotkey->num_sifr < hkey->package.count) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "SQTY reports bad SINF length\n")); - status = AE_ERROR; - goto free_buffer; - } - - for (i = 0; i < hkey->package.count; i++) { - union acpi_object *element = &(hkey->package.elements[i]); - if (likely(element->type == ACPI_TYPE_INTEGER)) { - sinf[i] = element->integer.value; - } else { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Invalid HKEY.SINF data\n")); - status = AE_ERROR; - break; - } - } - sinf[hkey->package.count] = -1; - - free_buffer: - kfree(buffer.pointer); - return_VALUE(status == AE_OK ? AE_OK : AE_ERROR); -} - -static int acpi_pcc_read_sinf_field(struct seq_file *seq, int field) -{ - struct acpi_hotkey *hotkey = (struct acpi_hotkey *) seq->private; - u32 sinf[hotkey->num_sifr + 1]; - - ACPI_FUNCTION_TRACE("acpi_pcc_read_sinf_field"); - - if (ACPI_SUCCESS(acpi_pcc_retrieve_biosdata(hotkey, sinf))) - seq_printf(seq, "%u\n", sinf[field]); - else - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Couldn't retrieve BIOS data\n")); - - return_VALUE(AE_OK); -} - -/* ------------------------------------------------------------------------- - user interface functions - ------------------------------------------------------------------------- */ -/* read methods */ -/* Sinf read methods */ -#define PCC_SINF_READ_F(_name_, FUNC) \ -static int _name_(struct seq_file *seq, void *offset) \ -{ \ - return_VALUE(ACPI_SUCCESS(acpi_pcc_read_sinf_field(seq, \ - (FUNC))) \ - ? 0 : -EINVAL); \ -} - -PCC_SINF_READ_F(acpi_pcc_numbatteries_show, SINF_NUM_BATTERIES); -PCC_SINF_READ_F(acpi_pcc_lcdtype_show, SINF_LCD_TYPE); -PCC_SINF_READ_F(acpi_pcc_ac_brightness_max_show, SINF_AC_MAX_BRIGHT); -PCC_SINF_READ_F(acpi_pcc_ac_brightness_min_show, SINF_AC_MIN_BRIGHT); -PCC_SINF_READ_F(acpi_pcc_ac_brightness_show, SINF_AC_CUR_BRIGHT); -PCC_SINF_READ_F(acpi_pcc_dc_brightness_max_show, SINF_DC_MAX_BRIGHT); -PCC_SINF_READ_F(acpi_pcc_dc_brightness_min_show, SINF_DC_MIN_BRIGHT); -PCC_SINF_READ_F(acpi_pcc_dc_brightness_show, SINF_DC_CUR_BRIGHT); -PCC_SINF_READ_F(acpi_pcc_brightness_show, SINF_AC_CUR_BRIGHT); -PCC_SINF_READ_F(acpi_pcc_mute_show, SINF_MUTE); - -static int acpi_pcc_sticky_key_show(struct seq_file *seq, void *offset) -{ - struct acpi_hotkey *hotkey = seq->private; - - ACPI_FUNCTION_TRACE("acpi_pcc_sticky_key_show"); - - if (!hotkey || !hotkey->device) - return_VALUE(-EINVAL); - - seq_printf(seq, "%d\n", hotkey->sticky_mode); - - return_VALUE(0); -} - -static int acpi_pcc_keyinput_show(struct seq_file *seq, void *offset) -{ - struct acpi_hotkey *hotkey = seq->private; - struct input_dev *hotk_input_dev = hotkey->input_dev; - struct pcc_keyinput *keyinput = input_get_drvdata(hotk_input_dev); - - ACPI_FUNCTION_TRACE("acpi_pcc_keyinput_show"); - - seq_printf(seq, "%d\n", keyinput->key_mode); - - return_VALUE(0); -} - -static int acpi_pcc_version_show(struct seq_file *seq, void *offset) -{ - struct acpi_hotkey *hotkey = seq->private; - - ACPI_FUNCTION_TRACE("acpi_pcc_version_show"); - - if (!hotkey || !hotkey->device) - return_VALUE(-EINVAL); - - seq_printf(seq, "%s version %s\n", ACPI_PCC_DRIVER_NAME, - ACPI_PCC_VERSION); - seq_printf(seq, "%li functions\n", hotkey->num_sifr); - - return_VALUE(0); -} - -/* write methods */ -static ssize_t acpi_pcc_write_single_flag(struct file *file, - const char __user *buffer, - size_t count, - int sinf_func) -{ - struct seq_file *seq = file->private_data; - struct acpi_hotkey *hotkey = seq->private; - char write_string[PROC_STR_MAX_LEN]; - u32 val; - - ACPI_FUNCTION_TRACE("acpi_pcc_write_single_flag"); - - if (!hotkey || (count > sizeof(write_string) - 1)) - return_VALUE(-EINVAL); - - if (copy_from_user(write_string, buffer, count)) - return_VALUE(-EFAULT); - - write_string[count] = '\0'; - - if ((sscanf(write_string, "%3i", &val) == 1) && - (val == 0 || val == 1)) - acpi_pcc_write_sset(hotkey, sinf_func, val); - - return_VALUE(count); -} - -static unsigned long acpi_pcc_write_brightness(struct file *file, - const char __user *buffer, - size_t count, - int min_index, int max_index, - int cur_index) -{ - struct seq_file *seq = (struct seq_file *)file->private_data; - struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; - char write_string[PROC_STR_MAX_LEN]; - u32 bright; - u32 sinf[hotkey->num_sifr + 1]; - - ACPI_FUNCTION_TRACE("acpi_pcc_write_brightness"); - - if (!hotkey || (count > sizeof(write_string) - 1)) - return_VALUE(-EINVAL); - - if (copy_from_user(write_string, buffer, count)) - return_VALUE(-EFAULT); - - write_string[count] = '\0'; - - if (ACPI_FAILURE(acpi_pcc_retrieve_biosdata(hotkey, sinf))) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Couldn't retrieve BIOS data\n")); - goto end; - } - - if ((sscanf(write_string, "%4i", &bright) == 1) && - (bright >= sinf[min_index]) && - (bright <= sinf[max_index])) - acpi_pcc_write_sset(hotkey, cur_index, bright); - -end: - return_VALUE(count); -} - -static ssize_t acpi_pcc_write_ac_brightness(struct file *file, - const char __user *buffer, - size_t count, loff_t *ppos) -{ - return_VALUE(acpi_pcc_write_brightness(file, buffer, count, - SINF_AC_MIN_BRIGHT, - SINF_AC_MAX_BRIGHT, - SINF_AC_CUR_BRIGHT)); -} - -static ssize_t acpi_pcc_write_dc_brightness(struct file *file, - const char __user *buffer, - size_t count, loff_t *ppos) -{ - return_VALUE(acpi_pcc_write_brightness(file, buffer, count, - SINF_DC_MIN_BRIGHT, - SINF_DC_MAX_BRIGHT, - SINF_DC_CUR_BRIGHT)); -} - -static ssize_t acpi_pcc_write_no_brightness(struct file *file, - const char __user *buffer, - size_t count, loff_t *ppos) -{ - return acpi_pcc_write_brightness(file, buffer, count, - SINF_AC_MIN_BRIGHT, - SINF_AC_MAX_BRIGHT, - SINF_AC_CUR_BRIGHT); -} - -static ssize_t acpi_pcc_write_mute(struct file *file, - const char __user *buffer, - size_t count, loff_t *ppos) -{ - return_VALUE(acpi_pcc_write_single_flag(file, buffer, count, - SINF_MUTE)); -} - -static ssize_t acpi_pcc_write_sticky_key(struct file *file, - const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct seq_file *seq = (struct seq_file *)file->private_data; - struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; - char write_string[PROC_STR_MAX_LEN]; - int mode; - - ACPI_FUNCTION_TRACE("acpi_pcc_write_sticky_key"); - - if (!hotkey || (count > sizeof(write_string) - 1)) - return_VALUE(-EINVAL); - - if (copy_from_user(write_string, buffer, count)) - return_VALUE(-EFAULT); - - write_string[count] = '\0'; - - if ((sscanf(write_string, "%3i", &mode) == 1) && - (mode == 0 || mode == 1)) { - acpi_pcc_write_sset(hotkey, SINF_STICKY_KEY, mode); - hotkey->sticky_mode = mode; - } - - return_VALUE(count); -} - -static ssize_t acpi_pcc_write_keyinput(struct file *file, - const char __user *buffer, - size_t count, loff_t *ppos) -{ - struct seq_file *seq = (struct seq_file *)file->private_data; - struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; - struct pcc_keyinput *keyinput; - char write_string[PROC_STR_MAX_LEN]; - int key_mode; - - ACPI_FUNCTION_TRACE("acpi_pcc_write_keyinput"); - - if (!hotkey || (count > (sizeof(write_string) - 1))) - return_VALUE(-EINVAL); - - if (copy_from_user(write_string, buffer, count)) - return_VALUE(-EFAULT); - - write_string[count] = '\0'; - - if ((sscanf(write_string, "%4i", &key_mode) == 1) && - (key_mode == 0 || key_mode == 1)) { - keyinput = input_get_drvdata(hotkey->input_dev); - keyinput->key_mode = key_mode; - } - - return_VALUE(count); -} - -/* ------------------------------------------------------------------------- - hotkey driver - ------------------------------------------------------------------------- */ -static void acpi_pcc_generete_keyinput(struct acpi_hotkey *hotkey) -{ - struct input_dev *hotk_input_dev = hotkey->input_dev; - struct pcc_keyinput *keyinput = input_get_drvdata(hotk_input_dev); - int hinf = hotkey->status; - int key_code, hkey_num; - const int key_map[] = { - /* 0 */ -1, - /* 1 */ KEY_BRIGHTNESSDOWN, - /* 2 */ KEY_BRIGHTNESSUP, - /* 3 */ -1, /* vga/lcd switch event is not occur on - hotkey driver. */ - /* 4 */ KEY_MUTE, - /* 5 */ KEY_VOLUMEDOWN, - /* 6 */ KEY_VOLUMEUP, - /* 7 */ KEY_SLEEP, - /* 8 */ -1, /* Change CPU boost: do nothing */ - /* 9 */ KEY_BATT, - /* 10 */ KEY_SUSPEND, - }; - - ACPI_FUNCTION_TRACE("acpi_pcc_generete_keyinput"); - - if (keyinput->key_mode == 0) - return_VOID; - - hkey_num = hinf & 0xf; - - if ((0 > hkey_num) || - (hkey_num > ARRAY_SIZE(key_map))) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "hotkey number out of range: %d\n", - hkey_num)); - return_VOID; - } - - key_code = key_map[hkey_num]; - - if (key_code != -1) { - int pushed = (hinf & 0x80) ? TRUE : FALSE; - - input_report_key(hotk_input_dev, key_code, pushed); - input_sync(hotk_input_dev); - } -} - -static int acpi_pcc_hotkey_get_key(struct acpi_hotkey *hotkey) -{ - unsigned long result; - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_get_key"); - - status = acpi_evaluate_integer(hotkey->handle, METHOD_HKEY_QUERY, - NULL, &result); - if (likely(ACPI_SUCCESS(status))) - hotkey->status = result; - else - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "error getting hotkey status\n")); - - return_VALUE(status == AE_OK); -} - -void acpi_pcc_hotkey_notify(acpi_handle handle, u32 event, void *data) -{ - struct acpi_hotkey *hotkey = (struct acpi_hotkey *) data; - - ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_notify"); - - switch (event) { - case HKEY_NOTIFY: - if (acpi_pcc_hotkey_get_key(hotkey)) { - /* generate event like '"pcc HKEY 00000080 00000084"' - * when Fn+F4 pressed */ - acpi_bus_generate_proc_event(hotkey->device, event, - hotkey->status); - } - acpi_pcc_generete_keyinput(hotkey); - break; - default: - /* nothing to do */ - break; - } - return_VOID; -} - -/* ************************************************************************* - FS Interface (/proc) - ************************************************************************* */ -/* oepn proc file fs*/ -SEQ_OPEN_FS(acpi_pcc_dc_brightness_open_fs, acpi_pcc_dc_brightness_show); -SEQ_OPEN_FS(acpi_pcc_numbatteries_open_fs, acpi_pcc_numbatteries_show); -SEQ_OPEN_FS(acpi_pcc_lcdtype_open_fs, acpi_pcc_lcdtype_show); -SEQ_OPEN_FS(acpi_pcc_ac_brightness_max_open_fs, - acpi_pcc_ac_brightness_max_show); -SEQ_OPEN_FS(acpi_pcc_ac_brightness_min_open_fs, - acpi_pcc_ac_brightness_min_show); -SEQ_OPEN_FS(acpi_pcc_ac_brightness_open_fs, acpi_pcc_ac_brightness_show); -SEQ_OPEN_FS(acpi_pcc_dc_brightness_max_open_fs, - acpi_pcc_dc_brightness_max_show); -SEQ_OPEN_FS(acpi_pcc_dc_brightness_min_open_fs, - acpi_pcc_dc_brightness_min_show); -SEQ_OPEN_FS(acpi_pcc_brightness_open_fs, acpi_pcc_brightness_show); -SEQ_OPEN_FS(acpi_pcc_mute_open_fs, acpi_pcc_mute_show); -SEQ_OPEN_FS(acpi_pcc_version_open_fs, acpi_pcc_version_show); -SEQ_OPEN_FS(acpi_pcc_keyinput_open_fs, acpi_pcc_keyinput_show); -SEQ_OPEN_FS(acpi_pcc_sticky_key_open_fs, acpi_pcc_sticky_key_show); - -static struct file_operations acpi_pcc_numbatteries_fops = - SEQ_FILEOPS_R(acpi_pcc_numbatteries_open_fs); -static struct file_operations acpi_pcc_lcdtype_fops = - SEQ_FILEOPS_R(acpi_pcc_lcdtype_open_fs); -static struct file_operations acpi_pcc_mute_fops = - SEQ_FILEOPS_RW(acpi_pcc_mute_open_fs, acpi_pcc_write_mute); -static struct file_operations acpi_pcc_ac_brightness_fops = - SEQ_FILEOPS_RW(acpi_pcc_ac_brightness_open_fs, - acpi_pcc_write_ac_brightness); -static struct file_operations acpi_pcc_ac_brightness_max_fops = - SEQ_FILEOPS_R(acpi_pcc_ac_brightness_max_open_fs); -static struct file_operations acpi_pcc_ac_brightness_min_fops = - SEQ_FILEOPS_R(acpi_pcc_ac_brightness_min_open_fs); -static struct file_operations acpi_pcc_dc_brightness_fops = - SEQ_FILEOPS_RW(acpi_pcc_dc_brightness_open_fs, - acpi_pcc_write_dc_brightness); -static struct file_operations acpi_pcc_dc_brightness_max_fops = - SEQ_FILEOPS_R(acpi_pcc_dc_brightness_max_open_fs); -static struct file_operations acpi_pcc_dc_brightness_min_fops = - SEQ_FILEOPS_R(acpi_pcc_dc_brightness_min_open_fs); -static struct file_operations acpi_pcc_brightness_fops = - SEQ_FILEOPS_RW(acpi_pcc_brightness_open_fs, - acpi_pcc_write_no_brightness); -static struct file_operations acpi_pcc_sticky_key_fops = - SEQ_FILEOPS_RW(acpi_pcc_sticky_key_open_fs, acpi_pcc_write_sticky_key); -static struct file_operations acpi_pcc_keyinput_fops = - SEQ_FILEOPS_RW(acpi_pcc_keyinput_open_fs, acpi_pcc_write_keyinput); -static struct file_operations acpi_pcc_version_fops = - SEQ_FILEOPS_R(acpi_pcc_version_open_fs); - -struct proc_item { - const char *name; - struct file_operations *fops; - mode_t flag; -}; - -/* Note: These functions map *exactly* to the SINF/SSET functions */ -struct proc_item acpi_pcc_proc_items_sifr[] = { - { "num_batteries", &acpi_pcc_numbatteries_fops, S_IRUGO }, - { "lcd_type", &acpi_pcc_lcdtype_fops, S_IRUGO }, - { "ac_brightness_max", &acpi_pcc_ac_brightness_max_fops, S_IRUGO }, - { "ac_brightness_min", &acpi_pcc_ac_brightness_min_fops, S_IRUGO }, - { "ac_brightness", &acpi_pcc_ac_brightness_fops, - S_IFREG | S_IRUGO | S_IWUSR }, - { "dc_brightness_max", &acpi_pcc_dc_brightness_max_fops, S_IRUGO }, - { "dc_brightness_min", &acpi_pcc_dc_brightness_min_fops, S_IRUGO }, - { "dc_brightness", &acpi_pcc_dc_brightness_fops, - S_IFREG | S_IRUGO | S_IWUSR }, - { "brightness", &acpi_pcc_brightness_fops, S_IFREG | S_IRUGO | S_IWUSR}, - { "mute", &acpi_pcc_mute_fops, S_IFREG | S_IRUGO | S_IWUSR }, - { NULL, NULL, 0 }, -}; - -struct proc_item acpi_pcc_proc_items[] = { - { "sticky_key", &acpi_pcc_sticky_key_fops, S_IFREG | S_IRUGO | S_IWUSR}, - { "keyinput", &acpi_pcc_keyinput_fops, S_IFREG | S_IRUGO | S_IWUSR }, - { "version", &acpi_pcc_version_fops, S_IRUGO }, - { NULL, NULL, 0 }, -}; - -static int __devinit acpi_pcc_add_device(struct acpi_device *device, - struct proc_item *proc_items, - int num) -{ - struct acpi_hotkey *hotkey = acpi_driver_data(device); - struct proc_dir_entry *proc; - struct proc_item *item; - int i; - - for (item = proc_items, i = 0; item->name && i < num; ++item, ++i) { - proc = create_proc_entry(item->name, item->flag, - hotkey->proc_dir_entry); - if (likely(proc)) { - proc->proc_fops = item->fops; - proc->data = hotkey; - proc->owner = THIS_MODULE; - } else { - while (i-- > 0) { - item--; - remove_proc_entry(item->name, - hotkey->proc_dir_entry); - } - return_VALUE(-ENODEV); - } - } - return_VALUE(0); -} - -static int __devinit acpi_pcc_proc_init(struct acpi_device *device) -{ - struct proc_dir_entry *acpi_pcc_dir; - struct acpi_hotkey *hotkey = acpi_driver_data(device); - acpi_status status; - - ACPI_FUNCTION_TRACE("acpi_pcc_proc_init"); - - acpi_pcc_dir = proc_mkdir(PROC_PCC, acpi_root_dir); - - if (unlikely(!acpi_pcc_dir)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Couldn't create dir in /proc\n")); - return_VALUE(-ENODEV); - } - - acpi_pcc_dir->owner = THIS_MODULE; - hotkey->proc_dir_entry = acpi_pcc_dir; - - status = acpi_pcc_add_device(device, acpi_pcc_proc_items_sifr, - hotkey->num_sifr); - status |= acpi_pcc_add_device(device, acpi_pcc_proc_items, - ARRAY_SIZE(acpi_pcc_proc_items)); - if (unlikely(status)) { - remove_proc_entry(PROC_PCC, acpi_root_dir); - hotkey->proc_dir_entry = NULL; - return_VALUE(-ENODEV); - } - - return_VALUE(status); -} - -static void __devexit acpi_pcc_remove_device(struct acpi_device *device, - struct proc_item *proc_items, - int num) -{ - struct acpi_hotkey *hotkey = acpi_driver_data(device); - struct proc_item *item; - int i; - - for (item = proc_items, i = 0; - item->name != NULL && i < num; - ++item, ++i) { - remove_proc_entry(item->name, hotkey->proc_dir_entry); - } - - return_VOID; -} - -/* ************************************************************************* - Power Management - ************************************************************************* */ -#ifdef CONFIG_PM -static int acpi_pcc_hotkey_resume(struct acpi_device *device) -{ - struct acpi_hotkey *hotkey = acpi_driver_data(device); - acpi_status status = AE_OK; - - ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_resume"); - - if (device == NULL || hotkey == NULL) - return_VALUE(-EINVAL); - - if (hotkey->num_sifr != 0) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Sticky mode restore: %d\n", - hotkey->sticky_mode)); - - status = acpi_pcc_write_sset(hotkey, SINF_STICKY_KEY, - hotkey->sticky_mode); - } - if (status != AE_OK) - return_VALUE(-EINVAL); - - return_VALUE(0); -} -#endif - -/* ************************************************************************* - Module init/remove - ************************************************************************* */ -/* ------------------------------------------------------------------------- - input - ------------------------------------------------------------------------- */ -static int __devinit acpi_pcc_init_input(struct acpi_hotkey *hotkey) -{ - struct input_dev *hotk_input_dev; - struct pcc_keyinput *pcc_keyinput; - int error; - - ACPI_FUNCTION_TRACE("acpi_pcc_init_input"); - - hotk_input_dev = input_allocate_device(); - if (hotk_input_dev == NULL) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Couldn't allocate input device for hotkey")); - goto err_input; - } - - pcc_keyinput = kcalloc(1, sizeof(struct pcc_keyinput), GFP_KERNEL); - - if (pcc_keyinput == NULL) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Couldn't allocate mem for private data")); - goto err_pcc; - } - - hotk_input_dev->evbit[0] = BIT(EV_KEY); - - set_bit(KEY_BRIGHTNESSDOWN, hotk_input_dev->keybit); - set_bit(KEY_BRIGHTNESSUP, hotk_input_dev->keybit); - set_bit(KEY_MUTE, hotk_input_dev->keybit); - set_bit(KEY_VOLUMEDOWN, hotk_input_dev->keybit); - set_bit(KEY_VOLUMEUP, hotk_input_dev->keybit); - set_bit(KEY_SLEEP, hotk_input_dev->keybit); - set_bit(KEY_BATT, hotk_input_dev->keybit); - set_bit(KEY_SUSPEND, hotk_input_dev->keybit); - - hotk_input_dev->name = ACPI_PCC_DRIVER_NAME; - hotk_input_dev->phys = ACPI_PCC_INPUT_PHYS; - hotk_input_dev->id.bustype = BUS_PCC_HOTKEY; - hotk_input_dev->id.vendor = 0x0001; - hotk_input_dev->id.product = 0x0001; - hotk_input_dev->id.version = 0x0100; - - pcc_keyinput->key_mode = PCC_KEYINPUT_MODE; - pcc_keyinput->hotkey = hotkey; - - input_set_drvdata(hotk_input_dev, pcc_keyinput); - - hotkey->input_dev = hotk_input_dev; - - error = input_register_device(hotk_input_dev); - - if (error) - goto err_pcc; - - return_VALUE(0); - - err_pcc: - input_unregister_device(hotk_input_dev); - err_input: - return_VALUE(-ENOMEM); -} - -static void __devexit acpi_pcc_remove_input(struct acpi_hotkey *hotkey) -{ - struct input_dev *hotk_input_dev; - struct pcc_keyinput *pcc_keyinput; - - ACPI_FUNCTION_TRACE("acpi_pcc_remove_input"); - - if (hotkey == NULL) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Can't free memory")); - return_VOID; - } - - hotk_input_dev = hotkey->input_dev; - pcc_keyinput = input_get_drvdata(hotk_input_dev); - - input_unregister_device(hotk_input_dev); - - kfree(pcc_keyinput); -} - -/* ------------------------------------------------------------------------- - ACPI - ------------------------------------------------------------------------- */ -static int __devinit acpi_pcc_hotkey_add(struct acpi_device *device) -{ - acpi_status status = AE_OK; - struct acpi_hotkey *hotkey = NULL; - int sifr_status, num_sifr, result; - - ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_add"); - - if (device == NULL) - return_VALUE(-EINVAL); - - sifr_status = acpi_pcc_get_sqty(device); - - if (sifr_status > 255) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "num_sifr too large")); - return_VALUE(-ENODEV); - } - - if (sifr_status < 0) { - ACPI_DEBUG_PRINT((ACPI_DB_INFO, "not support SQTY")); - num_sifr = 0; - } else { - num_sifr = sifr_status; - } - - hotkey = kcalloc(1, sizeof(struct acpi_hotkey), GFP_KERNEL); - if (hotkey == NULL) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Couldn't allocate mem for hotkey")); - return_VALUE(-ENOMEM); - } - - hotkey->device = device; - hotkey->handle = device->handle; - hotkey->num_sifr = num_sifr; - device->driver_data = hotkey; - strcpy(acpi_device_name(device), ACPI_PCC_DEVICE_NAME); - strcpy(acpi_device_class(device), ACPI_PCC_CLASS); - - status = acpi_install_notify_handler(hotkey->handle, - ACPI_DEVICE_NOTIFY, - acpi_pcc_hotkey_notify, - hotkey); - - if (ACPI_FAILURE(status)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error installing notify handler\n")); - kfree(hotkey); - return_VALUE(-ENODEV); - } - - result = acpi_pcc_init_input(hotkey); - if (result != 0) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error installing keyinput handler\n")); - kfree(hotkey); - return_VALUE(result); - } - - return_VALUE(acpi_pcc_proc_init(device)); -} - -static int __devexit acpi_pcc_hotkey_remove(struct acpi_device *device, - int type) -{ - acpi_status status = AE_OK; - struct acpi_hotkey *hotkey = acpi_driver_data(device); - - ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_remove"); - - if (!device || !hotkey) - return_VALUE(-EINVAL); - - if (hotkey->proc_dir_entry) { - acpi_pcc_remove_device(device, acpi_pcc_proc_items_sifr, - hotkey->num_sifr); - acpi_pcc_remove_device(device, acpi_pcc_proc_items, - ARRAY_SIZE(acpi_pcc_proc_items)); - remove_proc_entry(PROC_PCC, acpi_root_dir); - } - - status = acpi_remove_notify_handler(hotkey->handle, - ACPI_DEVICE_NOTIFY, acpi_pcc_hotkey_notify); - - if (ACPI_FAILURE(status)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error removing notify handler\n")); - } - - acpi_pcc_remove_input(hotkey); - kfree(hotkey); - return_VALUE(status == AE_OK); -} - -/* ********************************************************************* - Module entry point - ********************************************************************* */ -static int __init acpi_pcc_init(void) -{ - int result; - - ACPI_FUNCTION_TRACE("acpi_pcc_init"); - - printk(KERN_INFO LOGPREFIX "loading...\n"); - - if (acpi_disabled) { - printk(KERN_INFO LOGPREFIX "ACPI disabled.\n"); - return_VALUE(-ENODEV); - } - - result = acpi_bus_register_driver(&acpi_pcc_driver); - if (result < 0) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error registering hotkey driver\n")); - return_VALUE(-ENODEV); - } - - return_VALUE(result); -} - -static void __exit acpi_pcc_exit(void) -{ - ACPI_FUNCTION_TRACE("acpi_pcc_exit"); - - printk(KERN_INFO LOGPREFIX "unloading...\n"); - - acpi_bus_unregister_driver(&acpi_pcc_driver); - - return_VOID; -} - -module_init(acpi_pcc_init); -module_exit(acpi_pcc_exit); diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index c72a13562954..4a4dd9adc328 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -75,6 +75,15 @@ config LCD_PLATFORM This driver provides a platform-device registered LCD power control interface. +config LCD_TOSA + tristate "Sharp SL-6000 LCD Driver" + depends on LCD_CLASS_DEVICE && SPI + depends on MACH_TOSA + default n + help + If you have an Sharp SL-6000 Zaurus say Y to enable a driver + for its LCD. + # # Backlight # @@ -115,7 +124,7 @@ config BACKLIGHT_ATMEL_PWM called atmel-pwm-bl. config BACKLIGHT_CORGI - tristate "Generic (aka Sharp Corgi) Backlight Driver" + tristate "Generic (aka Sharp Corgi) Backlight Driver (DEPRECATED)" depends on BACKLIGHT_CLASS_DEVICE default n help @@ -123,6 +132,9 @@ config BACKLIGHT_CORGI known as the Corgi backlight driver. If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y. Most users can say n. + Note: this driver is marked as deprecated, try enable SPI and + use the new corgi_lcd driver with integrated backlight control + config BACKLIGHT_LOCOMO tristate "Sharp LOCOMO LCD/Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && SHARP_LOCOMO @@ -171,6 +183,13 @@ config BACKLIGHT_PWM If you have a LCD backlight adjustable by PWM, say Y to enable this driver. +config BACKLIGHT_DA903X + tristate "Backlight Driver for DA9030/DA9034 using WLED" + depends on BACKLIGHT_CLASS_DEVICE && PMIC_DA903X + help + If you have a LCD backlight connected to the WLED output of DA9030 + or DA9034 WLED output, say Y here to enable this driver. + config BACKLIGHT_MBP_NVIDIA tristate "MacBook Pro Nvidia Backlight Driver" depends on BACKLIGHT_CLASS_DEVICE && X86 @@ -179,3 +198,19 @@ config BACKLIGHT_MBP_NVIDIA If you have an Apple Macbook Pro with Nvidia graphics hardware say Y to enable a driver for its backlight +config BACKLIGHT_TOSA + tristate "Sharp SL-6000 Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && I2C + depends on MACH_TOSA && LCD_TOSA + default n + help + If you have an Sharp SL-6000 Zaurus say Y to enable a driver + for its backlight + +config BACKLIGHT_SAHARA + tristate "Tabletkiosk Sahara Touch-iT Backlight Driver" + depends on BACKLIGHT_CLASS_DEVICE && X86 + default n + help + If you have a Tabletkiosk Sahara Touch-iT, say y to enable the + backlight driver. diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 3ec551eb472c..103427de6703 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_LCD_ILI9320) += ili9320.o obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o obj-$(CONFIG_LCD_TDO24M) += tdo24m.o +obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o @@ -17,5 +18,8 @@ obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o +obj-$(CONFIG_BACKLIGHT_DA903X) += da903x.o obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o +obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o +obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o diff --git a/drivers/video/backlight/da903x.c b/drivers/video/backlight/da903x.c new file mode 100644 index 000000000000..242c38250166 --- /dev/null +++ b/drivers/video/backlight/da903x.c @@ -0,0 +1,201 @@ +/* + * Backlight driver for Dialog Semiconductor DA9030/DA9034 + * + * Copyright (C) 2008 Compulab, Ltd. + * Mike Rapoport <mike@compulab.co.il> + * + * Copyright (C) 2006-2008 Marvell International Ltd. + * Eric Miao <eric.miao@marvell.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/mfd/da903x.h> + +#define DA9030_WLED_CONTROL 0x25 +#define DA9030_WLED_CP_EN (1 << 6) +#define DA9030_WLED_TRIM(x) ((x) & 0x7) + +#define DA9034_WLED_CONTROL1 0x3C +#define DA9034_WLED_CONTROL2 0x3D + +#define DA9034_WLED_BOOST_EN (1 << 5) + +#define DA9030_MAX_BRIGHTNESS 7 +#define DA9034_MAX_BRIGHTNESS 0x7f + +struct da903x_backlight_data { + struct device *da903x_dev; + int id; + int current_brightness; +}; + +static int da903x_backlight_set(struct backlight_device *bl, int brightness) +{ + struct da903x_backlight_data *data = bl_get_data(bl); + struct device *dev = data->da903x_dev; + uint8_t val; + int ret = 0; + + switch (data->id) { + case DA9034_ID_WLED: + ret = da903x_update(dev, DA9034_WLED_CONTROL1, + brightness, 0x7f); + if (ret) + return ret; + + if (data->current_brightness && brightness == 0) + ret = da903x_clr_bits(dev, + DA9034_WLED_CONTROL2, + DA9034_WLED_BOOST_EN); + + if (data->current_brightness == 0 && brightness) + ret = da903x_set_bits(dev, + DA9034_WLED_CONTROL2, + DA9034_WLED_BOOST_EN); + break; + case DA9030_ID_WLED: + val = DA9030_WLED_TRIM(brightness); + val |= brightness ? DA9030_WLED_CP_EN : 0; + ret = da903x_write(dev, DA9030_WLED_CONTROL, val); + break; + } + + if (ret) + return ret; + + data->current_brightness = brightness; + return 0; +} + +static int da903x_backlight_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + + if (bl->props.power != FB_BLANK_UNBLANK) + brightness = 0; + + if (bl->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + return da903x_backlight_set(bl, brightness); +} + +static int da903x_backlight_get_brightness(struct backlight_device *bl) +{ + struct da903x_backlight_data *data = bl_get_data(bl); + return data->current_brightness; +} + +static struct backlight_ops da903x_backlight_ops = { + .update_status = da903x_backlight_update_status, + .get_brightness = da903x_backlight_get_brightness, +}; + +static int da903x_backlight_probe(struct platform_device *pdev) +{ + struct da903x_backlight_data *data; + struct backlight_device *bl; + int max_brightness; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (data == NULL) + return -ENOMEM; + + switch (pdev->id) { + case DA9030_ID_WLED: + max_brightness = DA9030_MAX_BRIGHTNESS; + break; + case DA9034_ID_WLED: + max_brightness = DA9034_MAX_BRIGHTNESS; + break; + default: + dev_err(&pdev->dev, "invalid backlight device ID(%d)\n", + pdev->id); + return -EINVAL; + } + + data->id = pdev->id; + data->da903x_dev = pdev->dev.parent; + data->current_brightness = 0; + + bl = backlight_device_register(pdev->name, data->da903x_dev, + data, &da903x_backlight_ops); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "failed to register backlight\n"); + return PTR_ERR(bl); + } + + bl->props.max_brightness = max_brightness; + bl->props.brightness = max_brightness; + + platform_set_drvdata(pdev, bl); + backlight_update_status(bl); + return 0; +} + +static int da903x_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct da903x_backlight_data *data = bl_get_data(bl); + + backlight_device_unregister(bl); + kfree(data); + return 0; +} + +#ifdef CONFIG_PM +static int da903x_backlight_suspend(struct platform_device *pdev, + pm_message_t state) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + return da903x_backlight_set(bl, 0); +} + +static int da903x_backlight_resume(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + + backlight_update_status(bl); + return 0; +} +#else +#define da903x_backlight_suspend NULL +#define da903x_backlight_resume NULL +#endif + +static struct platform_driver da903x_backlight_driver = { + .driver = { + .name = "da903x-backlight", + .owner = THIS_MODULE, + }, + .probe = da903x_backlight_probe, + .remove = da903x_backlight_remove, + .suspend = da903x_backlight_suspend, + .resume = da903x_backlight_resume, +}; + +static int __init da903x_backlight_init(void) +{ + return platform_driver_register(&da903x_backlight_driver); +} +module_init(da903x_backlight_init); + +static void __exit da903x_backlight_exit(void) +{ + platform_driver_unregister(&da903x_backlight_driver); +} +module_exit(da903x_backlight_exit); + +MODULE_DESCRIPTION("Backlight Driver for Dialog Semiconductor DA9030/DA9034"); +MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>" + "Mike Rapoport <mike@compulab.co.il>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da903x-backlight"); diff --git a/drivers/video/backlight/kb3886_bl.c b/drivers/video/backlight/kb3886_bl.c new file mode 100644 index 000000000000..a38fda1742dd --- /dev/null +++ b/drivers/video/backlight/kb3886_bl.c @@ -0,0 +1,204 @@ +/* + * Backlight Driver for the KB3886 Backlight + * + * Copyright (c) 2007-2008 Claudio Nieder + * + * Based on corgi_bl.c by Richard Purdie and kb3886 driver by Robert Woerle + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mutex.h> +#include <linux/fb.h> +#include <linux/backlight.h> +#include <linux/delay.h> +#include <linux/dmi.h> + +#define KB3886_PARENT 0x64 +#define KB3886_IO 0x60 +#define KB3886_ADC_DAC_PWM 0xC4 +#define KB3886_PWM0_WRITE 0x81 +#define KB3886_PWM0_READ 0x41 + +static DEFINE_MUTEX(bl_mutex); + +static void kb3886_bl_set_intensity(int intensity) +{ + mutex_lock(&bl_mutex); + intensity = intensity&0xff; + outb(KB3886_ADC_DAC_PWM, KB3886_PARENT); + msleep(10); + outb(KB3886_PWM0_WRITE, KB3886_IO); + msleep(10); + outb(intensity, KB3886_IO); + mutex_unlock(&bl_mutex); +} + +struct kb3886bl_machinfo { + int max_intensity; + int default_intensity; + int limit_mask; + void (*set_bl_intensity)(int intensity); +}; + +static struct kb3886bl_machinfo kb3886_bl_machinfo = { + .max_intensity = 0xff, + .default_intensity = 0xa0, + .limit_mask = 0x7f, + .set_bl_intensity = kb3886_bl_set_intensity, +}; + +static struct platform_device kb3886bl_device = { + .name = "kb3886-bl", + .dev = { + .platform_data = &kb3886_bl_machinfo, + }, + .id = -1, +}; + +static struct platform_device *devices[] __initdata = { + &kb3886bl_device, +}; + +/* + * Back to driver + */ + +static int kb3886bl_intensity; +static struct backlight_device *kb3886_backlight_device; +static struct kb3886bl_machinfo *bl_machinfo; + +static unsigned long kb3886bl_flags; +#define KB3886BL_SUSPENDED 0x01 + +static struct dmi_system_id __initdata kb3886bl_device_table[] = { + { + .ident = "Sahara Touch-iT", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SDV"), + DMI_MATCH(DMI_PRODUCT_NAME, "iTouch T201"), + }, + }, + { } +}; + +static int kb3886bl_send_intensity(struct backlight_device *bd) +{ + int intensity = bd->props.brightness; + + if (bd->props.power != FB_BLANK_UNBLANK) + intensity = 0; + if (bd->props.fb_blank != FB_BLANK_UNBLANK) + intensity = 0; + if (kb3886bl_flags & KB3886BL_SUSPENDED) + intensity = 0; + + bl_machinfo->set_bl_intensity(intensity); + + kb3886bl_intensity = intensity; + return 0; +} + +#ifdef CONFIG_PM +static int kb3886bl_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct backlight_device *bd = platform_get_drvdata(pdev); + + kb3886bl_flags |= KB3886BL_SUSPENDED; + backlight_update_status(bd); + return 0; +} + +static int kb3886bl_resume(struct platform_device *pdev) +{ + struct backlight_device *bd = platform_get_drvdata(pdev); + + kb3886bl_flags &= ~KB3886BL_SUSPENDED; + backlight_update_status(bd); + return 0; +} +#else +#define kb3886bl_suspend NULL +#define kb3886bl_resume NULL +#endif + +static int kb3886bl_get_intensity(struct backlight_device *bd) +{ + return kb3886bl_intensity; +} + +static struct backlight_ops kb3886bl_ops = { + .get_brightness = kb3886bl_get_intensity, + .update_status = kb3886bl_send_intensity, +}; + +static int kb3886bl_probe(struct platform_device *pdev) +{ + struct kb3886bl_machinfo *machinfo = pdev->dev.platform_data; + + bl_machinfo = machinfo; + if (!machinfo->limit_mask) + machinfo->limit_mask = -1; + + kb3886_backlight_device = backlight_device_register("kb3886-bl", + &pdev->dev, NULL, &kb3886bl_ops); + if (IS_ERR(kb3886_backlight_device)) + return PTR_ERR(kb3886_backlight_device); + + platform_set_drvdata(pdev, kb3886_backlight_device); + + kb3886_backlight_device->props.max_brightness = machinfo->max_intensity; + kb3886_backlight_device->props.power = FB_BLANK_UNBLANK; + kb3886_backlight_device->props.brightness = machinfo->default_intensity; + backlight_update_status(kb3886_backlight_device); + + return 0; +} + +static int kb3886bl_remove(struct platform_device *pdev) +{ + struct backlight_device *bd = platform_get_drvdata(pdev); + + backlight_device_unregister(bd); + + return 0; +} + +static struct platform_driver kb3886bl_driver = { + .probe = kb3886bl_probe, + .remove = kb3886bl_remove, + .suspend = kb3886bl_suspend, + .resume = kb3886bl_resume, + .driver = { + .name = "kb3886-bl", + }, +}; + +static int __init kb3886_init(void) +{ + if (!dmi_check_system(kb3886bl_device_table)) + return -ENODEV; + + platform_add_devices(devices, ARRAY_SIZE(devices)); + return platform_driver_register(&kb3886bl_driver); +} + +static void __exit kb3886_exit(void) +{ + platform_driver_unregister(&kb3886bl_driver); +} + +module_init(kb3886_init); +module_exit(kb3886_exit); + +MODULE_AUTHOR("Claudio Nieder <private@claudio.ch>"); +MODULE_DESCRIPTION("Tabletkiosk Sahara Touch-iT Backlight Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("dmi:*:svnSDV:pniTouchT201:*"); diff --git a/drivers/video/backlight/tosa_bl.c b/drivers/video/backlight/tosa_bl.c new file mode 100644 index 000000000000..43edbada12d1 --- /dev/null +++ b/drivers/video/backlight/tosa_bl.c @@ -0,0 +1,198 @@ +/* + * LCD / Backlight control code for Sharp SL-6000x (tosa) + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2007,2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/fb.h> +#include <linux/backlight.h> + +#include <asm/mach/sharpsl_param.h> + +#include <mach/tosa.h> + +#define COMADJ_DEFAULT 97 + +#define DAC_CH1 0 +#define DAC_CH2 1 + +struct tosa_bl_data { + struct i2c_client *i2c; + struct backlight_device *bl; + + int comadj; +}; + +static void tosa_bl_set_backlight(struct tosa_bl_data *data, int brightness) +{ + struct spi_device *spi = data->i2c->dev.platform_data; + + i2c_smbus_write_byte_data(data->i2c, DAC_CH1, data->comadj); + + /* SetBacklightDuty */ + i2c_smbus_write_byte_data(data->i2c, DAC_CH2, (u8)(brightness & 0xff)); + + /* SetBacklightVR */ + gpio_set_value(TOSA_GPIO_BL_C20MA, brightness & 0x100); + + tosa_bl_enable(spi, brightness); +} + +static int tosa_bl_update_status(struct backlight_device *dev) +{ + struct backlight_properties *props = &dev->props; + struct tosa_bl_data *data = dev_get_drvdata(&dev->dev); + int power = max(props->power, props->fb_blank); + int brightness = props->brightness; + + if (power) + brightness = 0; + + tosa_bl_set_backlight(data, brightness); + + return 0; +} + +static int tosa_bl_get_brightness(struct backlight_device *dev) +{ + struct backlight_properties *props = &dev->props; + + return props->brightness; +} + +static struct backlight_ops bl_ops = { + .get_brightness = tosa_bl_get_brightness, + .update_status = tosa_bl_update_status, +}; + +static int __devinit tosa_bl_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tosa_bl_data *data = kzalloc(sizeof(struct tosa_bl_data), GFP_KERNEL); + int ret = 0; + if (!data) + return -ENOMEM; + + data->comadj = sharpsl_param.comadj == -1 ? COMADJ_DEFAULT : sharpsl_param.comadj; + + ret = gpio_request(TOSA_GPIO_BL_C20MA, "backlight"); + if (ret) { + dev_dbg(&data->bl->dev, "Unable to request gpio!\n"); + goto err_gpio_bl; + } + ret = gpio_direction_output(TOSA_GPIO_BL_C20MA, 0); + if (ret) + goto err_gpio_dir; + + i2c_set_clientdata(client, data); + data->i2c = client; + + data->bl = backlight_device_register("tosa-bl", &client->dev, + data, &bl_ops); + if (IS_ERR(data->bl)) { + ret = PTR_ERR(data->bl); + goto err_reg; + } + + data->bl->props.brightness = 69; + data->bl->props.max_brightness = 512 - 1; + data->bl->props.power = FB_BLANK_UNBLANK; + + backlight_update_status(data->bl); + + return 0; + +err_reg: + data->bl = NULL; + i2c_set_clientdata(client, NULL); +err_gpio_dir: + gpio_free(TOSA_GPIO_BL_C20MA); +err_gpio_bl: + kfree(data); + return ret; +} + +static int __devexit tosa_bl_remove(struct i2c_client *client) +{ + struct tosa_bl_data *data = i2c_get_clientdata(client); + + backlight_device_unregister(data->bl); + data->bl = NULL; + i2c_set_clientdata(client, NULL); + + gpio_free(TOSA_GPIO_BL_C20MA); + + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int tosa_bl_suspend(struct i2c_client *client, pm_message_t pm) +{ + struct tosa_bl_data *data = i2c_get_clientdata(client); + + tosa_bl_set_backlight(data, 0); + + return 0; +} + +static int tosa_bl_resume(struct i2c_client *client) +{ + struct tosa_bl_data *data = i2c_get_clientdata(client); + + backlight_update_status(data->bl); + return 0; +} +#else +#define tosa_bl_suspend NULL +#define tosa_bl_resume NULL +#endif + +static const struct i2c_device_id tosa_bl_id[] = { + { "tosa-bl", 0 }, + { }, +}; + + +static struct i2c_driver tosa_bl_driver = { + .driver = { + .name = "tosa-bl", + .owner = THIS_MODULE, + }, + .probe = tosa_bl_probe, + .remove = __devexit_p(tosa_bl_remove), + .suspend = tosa_bl_suspend, + .resume = tosa_bl_resume, + .id_table = tosa_bl_id, +}; + +static int __init tosa_bl_init(void) +{ + return i2c_add_driver(&tosa_bl_driver); +} + +static void __exit tosa_bl_exit(void) +{ + i2c_del_driver(&tosa_bl_driver); +} + +module_init(tosa_bl_init); +module_exit(tosa_bl_exit); + +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA"); + diff --git a/drivers/video/backlight/tosa_lcd.c b/drivers/video/backlight/tosa_lcd.c new file mode 100644 index 000000000000..57a26649f1a5 --- /dev/null +++ b/drivers/video/backlight/tosa_lcd.c @@ -0,0 +1,280 @@ +/* + * LCD / Backlight control code for Sharp SL-6000x (tosa) + * + * Copyright (c) 2005 Dirk Opfer + * Copyright (c) 2007,2008 Dmitry Baryshkov + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/spi/spi.h> +#include <linux/i2c.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/lcd.h> +#include <linux/fb.h> + +#include <asm/mach/sharpsl_param.h> + +#include <mach/tosa.h> + +#define POWER_IS_ON(pwr) ((pwr) <= FB_BLANK_NORMAL) + +#define TG_REG0_VQV 0x0001 +#define TG_REG0_COLOR 0x0002 +#define TG_REG0_UD 0x0004 +#define TG_REG0_LR 0x0008 + +#define DAC_BASE 0x4e + +struct tosa_lcd_data { + struct spi_device *spi; + struct lcd_device *lcd; + struct i2c_client *i2c; + + int lcd_power; +}; + +static int tosa_tg_send(struct spi_device *spi, int adrs, uint8_t data) +{ + u8 buf[1]; + struct spi_message msg; + struct spi_transfer xfer = { + .len = 1, + .cs_change = 1, + .tx_buf = buf, + }; + + buf[0] = ((adrs & 0x07) << 5) | (data & 0x1f); + spi_message_init(&msg); + spi_message_add_tail(&xfer, &msg); + + return spi_sync(spi, &msg); +} + +int tosa_bl_enable(struct spi_device *spi, int enable) +{ + /* bl_enable GP04=1 otherwise GP04=0*/ + return tosa_tg_send(spi, TG_GPODR2, enable? 0x01 : 0x00); +} +EXPORT_SYMBOL(tosa_bl_enable); + +static void tosa_lcd_tg_init(struct tosa_lcd_data *data) +{ + /* TG on */ + gpio_set_value(TOSA_GPIO_TG_ON, 0); + + mdelay(60); + + /* delayed 0clk TCTL signal for VGA */ + tosa_tg_send(data->spi, TG_TPOSCTL, 0x00); + /* GPOS0=powercontrol, GPOS1=GPIO, GPOS2=TCTL */ + tosa_tg_send(data->spi, TG_GPOSR, 0x02); +} + +static void tosa_lcd_tg_on(struct tosa_lcd_data *data) +{ + struct spi_device *spi = data->spi; + const int value = TG_REG0_COLOR | TG_REG0_UD | TG_REG0_LR; + tosa_tg_send(spi, TG_PNLCTL, value | TG_REG0_VQV); /* this depends on mode */ + + /* TG LCD pannel power up */ + tosa_tg_send(spi, TG_PINICTL,0x4); + mdelay(50); + + /* TG LCD GVSS */ + tosa_tg_send(spi, TG_PINICTL,0x0); + + if (!data->i2c) { + /* after the pannel is powered up the first time, we can access the i2c bus */ + /* so probe for the DAC */ + struct i2c_adapter *adap = i2c_get_adapter(0); + struct i2c_board_info info = { + .type = "tosa-bl", + .addr = DAC_BASE, + .platform_data = data->spi, + }; + data->i2c = i2c_new_device(adap, &info); + } +} + +static void tosa_lcd_tg_off(struct tosa_lcd_data *data) +{ + struct spi_device *spi = data->spi; + + /* TG LCD VHSA off */ + tosa_tg_send(spi, TG_PINICTL,0x4); + mdelay(50); + + /* TG LCD signal off */ + tosa_tg_send(spi, TG_PINICTL,0x6); + mdelay(50); + + /* TG Off */ + gpio_set_value(TOSA_GPIO_TG_ON, 1); + mdelay(100); +} + +int tosa_lcd_set_power(struct lcd_device *lcd, int power) +{ + struct tosa_lcd_data *data = lcd_get_data(lcd); + + if (POWER_IS_ON(power) && !POWER_IS_ON(data->lcd_power)) + tosa_lcd_tg_on(data); + + if (!POWER_IS_ON(power) && POWER_IS_ON(data->lcd_power)) + tosa_lcd_tg_off(data); + + data->lcd_power = power; + return 0; +} + +static int tosa_lcd_get_power(struct lcd_device *lcd) +{ + struct tosa_lcd_data *data = lcd_get_data(lcd); + + return data->lcd_power; +} + +static struct lcd_ops tosa_lcd_ops = { + .set_power = tosa_lcd_set_power, + .get_power = tosa_lcd_get_power, +}; + +static int __devinit tosa_lcd_probe(struct spi_device *spi) +{ + int ret; + struct tosa_lcd_data *data; + + data = kzalloc(sizeof(struct tosa_lcd_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + /* + * bits_per_word cannot be configured in platform data + */ + spi->bits_per_word = 8; + + ret = spi_setup(spi); + if (ret < 0) + goto err_spi; + + data->spi = spi; + dev_set_drvdata(&spi->dev, data); + + ret = gpio_request(TOSA_GPIO_TG_ON, "tg #pwr"); + if (ret < 0) + goto err_gpio_tg; + + mdelay(60); + + ret = gpio_direction_output(TOSA_GPIO_TG_ON, 0); + if (ret < 0) + goto err_gpio_dir; + + mdelay(60); + tosa_lcd_tg_init(data); + + tosa_lcd_tg_on(data); + + data->lcd = lcd_device_register("tosa-lcd", &spi->dev, data, + &tosa_lcd_ops); + + if (IS_ERR(data->lcd)) { + ret = PTR_ERR(data->lcd); + data->lcd = NULL; + goto err_register; + } + + return 0; + +err_register: + tosa_lcd_tg_off(data); +err_gpio_dir: + gpio_free(TOSA_GPIO_TG_ON); +err_gpio_tg: + dev_set_drvdata(&spi->dev, NULL); +err_spi: + kfree(data); + return ret; +} + +static int __devexit tosa_lcd_remove(struct spi_device *spi) +{ + struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev); + + lcd_device_unregister(data->lcd); + + if (data->i2c) + i2c_unregister_device(data->i2c); + + tosa_lcd_tg_off(data); + + gpio_free(TOSA_GPIO_TG_ON); + dev_set_drvdata(&spi->dev, NULL); + kfree(data); + + return 0; +} + +#ifdef CONFIG_PM +static int tosa_lcd_suspend(struct spi_device *spi, pm_message_t state) +{ + struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev); + + tosa_lcd_tg_off(data); + + return 0; +} + +static int tosa_lcd_resume(struct spi_device *spi) +{ + struct tosa_lcd_data *data = dev_get_drvdata(&spi->dev); + + tosa_lcd_tg_init(data); + if (POWER_IS_ON(data->lcd_power)) + tosa_lcd_tg_on(data); + else + tosa_lcd_tg_off(data); + + return 0; +} +#else +#define tosa_lcd_suspend NULL +#define tosa_lcd_reume NULL +#endif + +static struct spi_driver tosa_lcd_driver = { + .driver = { + .name = "tosa-lcd", + .owner = THIS_MODULE, + }, + .probe = tosa_lcd_probe, + .remove = __devexit_p(tosa_lcd_remove), + .suspend = tosa_lcd_suspend, + .resume = tosa_lcd_resume, +}; + +static int __init tosa_lcd_init(void) +{ + return spi_register_driver(&tosa_lcd_driver); +} + +static void __exit tosa_lcd_exit(void) +{ + spi_unregister_driver(&tosa_lcd_driver); +} + +module_init(tosa_lcd_init); +module_exit(tosa_lcd_exit); + +MODULE_AUTHOR("Dmitry Baryshkov"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("LCD/Backlight control for Sharp SL-6000 PDA"); + diff --git a/include/linux/leds.h b/include/linux/leds.h index d41ccb56146a..d3a73f5a48c3 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h @@ -123,7 +123,7 @@ extern void ledtrig_ide_activity(void); */ struct led_info { const char *name; - char *default_trigger; + const char *default_trigger; int flags; }; @@ -135,7 +135,7 @@ struct led_platform_data { /* For the leds-gpio driver */ struct gpio_led { const char *name; - char *default_trigger; + const char *default_trigger; unsigned gpio; u8 active_low; }; diff --git a/include/linux/libata.h b/include/linux/libata.h index c261aa0584b1..507f53ef8038 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -695,7 +695,6 @@ struct ata_port { unsigned int cbl; /* cable type; ATA_CBL_xxx */ struct ata_queued_cmd qcmd[ATA_MAX_QUEUE]; - unsigned long qc_allocated; unsigned int qc_active; int nr_active_links; /* #links with active qcs */ diff --git a/lib/string_helpers.c b/lib/string_helpers.c index 8347925030ff..ab431d4cc970 100644 --- a/lib/string_helpers.c +++ b/lib/string_helpers.c @@ -23,7 +23,7 @@ int string_get_size(u64 size, const enum string_size_units units, char *buf, int len) { - const char *units_10[] = { "B", "KB", "MB", "GB", "TB", "PB", + const char *units_10[] = { "B", "kB", "MB", "GB", "TB", "PB", "EB", "ZB", "YB", NULL}; const char *units_2[] = {"B", "KiB", "MiB", "GiB", "TiB", "PiB", "EiB", "ZiB", "YiB", NULL }; @@ -31,7 +31,7 @@ int string_get_size(u64 size, const enum string_size_units units, [STRING_UNITS_10] = units_10, [STRING_UNITS_2] = units_2, }; - const int divisor[] = { + const unsigned int divisor[] = { [STRING_UNITS_10] = 1000, [STRING_UNITS_2] = 1024, }; @@ -40,23 +40,27 @@ int string_get_size(u64 size, const enum string_size_units units, char tmp[8]; tmp[0] = '\0'; + i = 0; + if (size >= divisor[units]) { + while (size >= divisor[units] && units_str[units][i]) { + remainder = do_div(size, divisor[units]); + i++; + } - for (i = 0; size > divisor[units] && units_str[units][i]; i++) - remainder = do_div(size, divisor[units]); + sf_cap = size; + for (j = 0; sf_cap*10 < 1000; j++) + sf_cap *= 10; - sf_cap = size; - for (j = 0; sf_cap*10 < 1000; j++) - sf_cap *= 10; - - if (j) { - remainder *= 1000; - do_div(remainder, divisor[units]); - snprintf(tmp, sizeof(tmp), ".%03lld", - (unsigned long long)remainder); - tmp[j+1] = '\0'; + if (j) { + remainder *= 1000; + do_div(remainder, divisor[units]); + snprintf(tmp, sizeof(tmp), ".%03lld", + (unsigned long long)remainder); + tmp[j+1] = '\0'; + } } - snprintf(buf, len, "%lld%s%s", (unsigned long long)size, + snprintf(buf, len, "%lld%s %s", (unsigned long long)size, tmp, units_str[units][i]); return 0; |