diff options
25 files changed, 64 insertions, 185 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ca6fb8e7f17d..d077ef8426df 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -107,6 +107,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap3-evm.dtb \ omap3-tobi.dtb \ omap4-panda.dtb \ + omap4-panda-a4.dtb \ omap4-panda-es.dtb \ omap4-var-som.dtb \ omap4-sdp.dtb \ diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 77b84e17c477..9b0d07746cba 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -15,6 +15,6 @@ memory { device_type = "memory"; - reg = <0x80000000 0x84000000>; /* 64 MB */ + reg = <0x80000000 0x4000000>; /* 64 MB */ }; }; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index be0f62bf9037..41b581fd0213 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -26,6 +26,8 @@ config SOC_HAS_OMAP2_SDRC config SOC_HAS_REALTIME_COUNTER bool "Real time free running counter" + depends on SOC_OMAP5 + default y config ARCH_OMAP2 bool "TI OMAP2" @@ -79,7 +81,6 @@ config SOC_OMAP5 select ARM_GIC select CPU_V7 select HAVE_SMP - select SOC_HAS_REALTIME_COUNTER select COMMON_CLK comment "OMAP Core Type" diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 7b201546834d..bb73afc9ac17 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -157,6 +157,7 @@ static struct omap_dss_device sdp3430_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = -1, }; static struct omap_dss_device sdp3430_dvi_device = { diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 4be58fd071f6..f81a303b87ff 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -208,6 +208,7 @@ static struct omap_dss_device am3517_evm_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = -1, }; static struct omap_dss_device am3517_evm_dvi_device = { diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index c8e37dc00892..b3102c2f4a3c 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -241,6 +241,7 @@ static struct omap_dss_device cm_t35_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = CM_T35_DVI_EN_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device cm_t35_dvi_device = { diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 7667eb749522..12865af25d3a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -141,6 +141,7 @@ static struct omap_dss_device devkit8000_lcd_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = -1, + .i2c_bus_num = 1, }; static struct omap_dss_device devkit8000_dvi_device = { diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 9a3878ec2256..3be1311f9e33 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -27,14 +27,12 @@ #include <linux/io.h> #include <linux/input/matrix_keypad.h> #include <linux/mfd/menelaus.h> +#include <linux/omap-dma.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <linux/omap-dma.h> -#include <plat/debug-devices.h> - #include <video/omapdss.h> #include <video/omap-panel-generic-dpi.h> @@ -42,11 +40,9 @@ #include "mux.h" #include "control.h" #include "gpmc.h" +#include "gpmc-smc91x.h" #define H4_FLASH_CS 0 -#define H4_SMC91X_CS 1 - -#define H4_ETHR_GPIO_IRQ 92 #if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) static const uint32_t board_matrix_keys[] = { @@ -250,71 +246,31 @@ static u32 is_gpmc_muxed(void) return 0; } -static inline void __init h4_init_debug(void) -{ - int eth_cs; - unsigned long cs_mem_base; - unsigned int muxed, rate; - struct clk *gpmc_fck; - - eth_cs = H4_SMC91X_CS; +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE) - gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ - if (IS_ERR(gpmc_fck)) { - WARN_ON(1); - return; - } - - clk_prepare_enable(gpmc_fck); - rate = clk_get_rate(gpmc_fck); - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 1, + .gpio_irq = 92, + .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_LOWLEVEL, +}; +static void __init board_smc91x_init(void) +{ if (is_gpmc_muxed()) - muxed = 0x200; - else - muxed = 0; - - /* Make sure CS1 timings are correct */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, - 0x00011000 | muxed); - - if (rate >= 160000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else if (rate >= 130000000) { - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); - } else {/* rate = 100000000 */ - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); - gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); - } - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); - goto out; - } + board_smc91x_data.flags |= GPMC_MUX_ADD_DATA; - udelay(100); + omap_mux_init_gpio(board_smc91x_data.gpio_irq, OMAP_PIN_INPUT); + gpmc_smc91x_init(&board_smc91x_data); +} - omap_mux_init_gpio(92, 0); - if (debug_card_init(cs_mem_base, H4_ETHR_GPIO_IRQ) < 0) - gpmc_cs_free(eth_cs); +#else -out: - clk_disable_unprepare(gpmc_fck); - clk_put(gpmc_fck); +static inline void board_smc91x_init(void) +{ } +#endif + static void __init h4_init_flash(void) { unsigned long base; @@ -371,6 +327,7 @@ static void __init omap_h4_init(void) omap_serial_init(); omap_sdrc_init(NULL, NULL); h4_init_flash(); + board_smc91x_init(); omap_display_init(&h4_dss_data); } diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 54647d6286b4..3985f35aee06 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -240,6 +240,7 @@ static struct omap_dss_device omap3_evm_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = OMAP3EVM_DVI_PANEL_EN_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device omap3_evm_dvi_device = { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index d8638b3b4f94..53a6cbcf9747 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -118,6 +118,7 @@ static struct omap_dss_device omap3_stalker_tv_device = { static struct tfp410_platform_data dvi_panel = { .power_down_gpio = DSS_ENABLE_GPIO, + .i2c_bus_num = -1, }; static struct omap_dss_device omap3_stalker_dvi_device = { diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c index 5c2fd4863b2b..2dabb9ecb986 100644 --- a/arch/arm/mach-omap2/common.c +++ b/arch/arm/mach-omap2/common.c @@ -16,8 +16,6 @@ #include <linux/init.h> #include <linux/platform_data/dsp-omap.h> -#include <plat/vram.h> - #include "common.h" #include "omap-secure.h" @@ -32,7 +30,6 @@ int __weak omap_secure_ram_reserve_memblock(void) void __init omap_reserve(void) { - omap_vram_reserve_sdram_memblock(); omap_dsp_reserve_sdram_memblock(); omap_secure_ram_reserve_memblock(); omap_barrier_reserve_memblock(); diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 26126343d6ac..6a217c98db54 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -135,10 +135,7 @@ static int __init _omap_mux_init_gpio(struct omap_mux_partition *partition, old_mode = omap_mux_read(partition, gpio_mux->reg_offset); mux_mode = val & ~(OMAP_MUX_NR_MODES - 1); - if (partition->flags & OMAP_MUX_GPIO_IN_MODE3) - mux_mode |= OMAP_MUX_MODE3; - else - mux_mode |= OMAP_MUX_MODE4; + mux_mode |= partition->gpio; pr_debug("%s: Setting signal %s.gpio%i 0x%04x -> 0x%04x\n", __func__, gpio_mux->muxnames[0], gpio, old_mode, mux_mode); omap_mux_write(partition, mux_mode, gpio_mux->reg_offset); @@ -800,7 +797,7 @@ int __init omap_mux_late_init(void) struct omap_mux *m = &e->mux; u16 mode = omap_mux_read(partition, m->reg_offset); - if (OMAP_MODE_GPIO(mode)) + if (OMAP_MODE_GPIO(partition, mode)) continue; #ifndef CONFIG_DEBUG_FS @@ -1065,7 +1062,7 @@ static void __init omap_mux_init_list(struct omap_mux_partition *partition, } #else /* Skip pins that are not muxed as GPIO by bootloader */ - if (!OMAP_MODE_GPIO(omap_mux_read(partition, + if (!OMAP_MODE_GPIO(partition, omap_mux_read(partition, superset->reg_offset))) { superset++; continue; @@ -1132,6 +1129,7 @@ int __init omap_mux_init(const char *name, u32 flags, partition->name = name; partition->flags = flags; + partition->gpio = flags & OMAP_MUX_MODE7; partition->size = mux_size; partition->phys = mux_pbase; partition->base = ioremap(mux_pbase, mux_size); diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 76f9b3c2f586..fdb22f14021f 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -58,7 +58,8 @@ #define OMAP_PIN_OFF_INPUT_PULLDOWN (OMAP_OFF_EN | OMAP_OFF_PULL_EN) #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN -#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_GPIO(partition, x) (((x) & OMAP_MUX_MODE7) == \ + partition->gpio) #define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ @@ -79,13 +80,20 @@ /* * omap_mux_init flags definition: * + * OMAP_GPIO_MUX_MODE, bits 0-2: gpio muxing mode, same like pad control + * register which includes values from 0-7. * OMAP_MUX_REG_8BIT: Ensure that access to padconf is done in 8 bits. * The default value is 16 bits. - * OMAP_MUX_GPIO_IN_MODE3: The GPIO is selected in mode3. - * The default is mode4. */ -#define OMAP_MUX_REG_8BIT (1 << 0) -#define OMAP_MUX_GPIO_IN_MODE3 (1 << 1) +#define OMAP_MUX_GPIO_IN_MODE0 OMAP_MUX_MODE0 +#define OMAP_MUX_GPIO_IN_MODE1 OMAP_MUX_MODE1 +#define OMAP_MUX_GPIO_IN_MODE2 OMAP_MUX_MODE2 +#define OMAP_MUX_GPIO_IN_MODE3 OMAP_MUX_MODE3 +#define OMAP_MUX_GPIO_IN_MODE4 OMAP_MUX_MODE4 +#define OMAP_MUX_GPIO_IN_MODE5 OMAP_MUX_MODE5 +#define OMAP_MUX_GPIO_IN_MODE6 OMAP_MUX_MODE6 +#define OMAP_MUX_GPIO_IN_MODE7 OMAP_MUX_MODE7 +#define OMAP_MUX_REG_8BIT (1 << 3) /** * struct omap_board_data - board specific device data @@ -105,6 +113,7 @@ struct omap_board_data { * struct mux_partition - contain partition related information * @name: name of the current partition * @flags: flags specific to this partition + * @gpio: gpio mux mode * @phys: physical address * @size: partition size * @base: virtual address after ioremap @@ -114,6 +123,7 @@ struct omap_board_data { struct omap_mux_partition { const char *name; u32 flags; + u32 gpio; u32 phys; u32 size; void __iomem *base; diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c index c47140bbbec4..c53609f46294 100644 --- a/arch/arm/mach-omap2/mux34xx.c +++ b/arch/arm/mach-omap2/mux34xx.c @@ -2053,7 +2053,7 @@ int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags) return -EINVAL; } - return omap_mux_init("core", 0, + return omap_mux_init("core", OMAP_MUX_GPIO_IN_MODE4, OMAP3_CONTROL_PADCONF_MUX_PBASE, OMAP3_CONTROL_PADCONF_MUX_SIZE, omap3_muxmodes, package_subset, board_subset, diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 93d102535c85..04fdbc4c499b 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -27,8 +27,7 @@ #include <linux/pm_runtime.h> #include <linux/console.h> #include <linux/omap-dma.h> - -#include <plat/omap-serial.h> +#include <linux/platform_data/serial-omap.h> #include "common.h" #include "omap_hwmod.h" diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 7016637b531c..06e141543623 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -190,7 +190,7 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, * kernel registering these devices remove them dynamically from the device * tree on boot. */ -void __init omap_dmtimer_init(void) +static void __init omap_dmtimer_init(void) { struct device_node *np; @@ -210,7 +210,7 @@ void __init omap_dmtimer_init(void) * * Get the timer errata flags that are specific to the OMAP device being used. */ -u32 __init omap_dm_timer_get_errata(void) +static u32 __init omap_dm_timer_get_errata(void) { if (cpu_is_omap24xx()) return 0; @@ -392,7 +392,7 @@ static struct of_device_id omap_counter_match[] __initdata = { }; /* Setup free-running counter for clocksource */ -static int __init omap2_sync32k_clocksource_init(void) +static int __init __maybe_unused omap2_sync32k_clocksource_init(void) { int ret; struct device_node *np = NULL; diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index d1dbe125b34f..2e44e8a22884 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -508,6 +508,10 @@ void __init usbhs_init(const struct usbhs_omap_board_data *pdata) if (cpu_is_omap34xx()) { setup_ehci_io_mux(pdata->port_mode); setup_ohci_io_mux(pdata->port_mode); + + if (omap_rev() <= OMAP3430_REV_ES2_1) + usbhs_data.single_ulpi_bypass = true; + } else if (cpu_is_omap44xx()) { setup_4430ehci_io_mux(pdata->port_mode); setup_4430ohci_io_mux(pdata->port_mode); diff --git a/arch/arm/plat-omap/Makefile b/arch/arm/plat-omap/Makefile index 8d885848600a..9d9aa2f55129 100644 --- a/arch/arm/plat-omap/Makefile +++ b/arch/arm/plat-omap/Makefile @@ -11,7 +11,6 @@ obj- := # omap_device support (OMAP2+ only at the moment) obj-$(CONFIG_OMAP_DM_TIMER) += dmtimer.o -obj-$(CONFIG_OMAP_DEBUG_DEVICES) += debug-devices.o obj-$(CONFIG_OMAP_DEBUG_LEDS) += debug-leds.o i2c-omap-$(CONFIG_I2C_OMAP) := i2c.o obj-y += $(i2c-omap-m) $(i2c-omap-y) diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c deleted file mode 100644 index a609e2161817..000000000000 --- a/arch/arm/plat-omap/debug-devices.c +++ /dev/null @@ -1,92 +0,0 @@ -/* - * linux/arch/arm/plat-omap/debug-devices.c - * - * Copyright (C) 2005 Nokia Corporation - * Modified from mach-omap2/board-h4.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/gpio.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/smc91x.h> - -#include <plat/debug-devices.h> - -/* Many OMAP development platforms reuse the same "debug board"; these - * platforms include H2, H3, H4, and Perseus2. - */ - -static struct smc91x_platdata smc91x_info = { - .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT, - .leda = RPC_LED_100_10, - .ledb = RPC_LED_TX_RX, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = -1, - .dev = { - .platform_data = &smc91x_info, - }, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct resource led_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device led_device = { - .name = "omap_dbg_led", - .id = -1, - .num_resources = ARRAY_SIZE(led_resources), - .resource = led_resources, -}; - -static struct platform_device *debug_devices[] __initdata = { - &smc91x_device, - &led_device, - /* ps2 kbd + mouse ports */ - /* 4 extra uarts */ - /* 6 input dip switches */ - /* 8 output pins */ -}; - -int __init debug_card_init(u32 addr, unsigned gpio) -{ - int status; - - smc91x_resources[0].start = addr + 0x300; - smc91x_resources[0].end = addr + 0x30f; - - smc91x_resources[1].start = gpio_to_irq(gpio); - smc91x_resources[1].end = gpio_to_irq(gpio); - - status = gpio_request(gpio, "SMC91x irq"); - if (status < 0) { - printk(KERN_ERR "GPIO%d unavailable for smc91x IRQ\n", gpio); - return status; - } - gpio_direction_input(gpio); - - led_resources[0].start = addr; - led_resources[0].end = addr + SZ_4K - 1; - - return platform_add_devices(debug_devices, ARRAY_SIZE(debug_devices)); -} diff --git a/arch/arm/plat-omap/include/plat/debug-devices.h b/arch/arm/plat-omap/include/plat/debug-devices.h deleted file mode 100644 index 8fc4287222dd..000000000000 --- a/arch/arm/plat-omap/include/plat/debug-devices.h +++ /dev/null @@ -1,2 +0,0 @@ -/* for TI reference platforms sharing the same debug card */ -extern int debug_card_init(u32 addr, unsigned gpio); diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 770a0d01e0b9..05164d7f054b 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -25,7 +25,6 @@ #include <linux/dma-mapping.h> #include <linux/spinlock.h> #include <linux/gpio.h> -#include <plat/cpu.h> #include <linux/platform_device.h> #include <linux/platform_data/usb-omap.h> #include <linux/pm_runtime.h> @@ -384,7 +383,7 @@ static void omap_usbhs_init(struct device *dev) reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS; /* Bypass the TLL module for PHY mode operation */ - if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) { + if (pdata->single_ulpi_bypass) { dev_dbg(dev, "OMAP3 ES version <= ES2.1\n"); if (is_ehci_phy_mode(pdata->port_mode[0]) || is_ehci_phy_mode(pdata->port_mode[1]) || diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 23f797eb7a28..57d6b29c039c 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -41,8 +41,7 @@ #include <linux/of.h> #include <linux/gpio.h> #include <linux/pinctrl/consumer.h> - -#include <plat/omap-serial.h> +#include <linux/platform_data/serial-omap.h> #define OMAP_MAX_HSUART_PORTS 6 diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/include/linux/platform_data/serial-omap.h index ff9b0aab5281..ff9b0aab5281 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/include/linux/platform_data/serial-omap.h diff --git a/include/linux/platform_data/usb-omap.h b/include/linux/platform_data/usb-omap.h index 8570bcfe6311..ef65b67c56c3 100644 --- a/include/linux/platform_data/usb-omap.h +++ b/include/linux/platform_data/usb-omap.h @@ -59,6 +59,9 @@ struct usbhs_omap_platform_data { struct ehci_hcd_omap_platform_data *ehci_data; struct ohci_hcd_omap_platform_data *ohci_data; + + /* OMAP3 <= ES2.1 have a single ulpi bypass control bit */ + unsigned single_ulpi_bypass:1; }; /*-------------------------------------------------------------------------*/ diff --git a/include/video/omap-panel-tfp410.h b/include/video/omap-panel-tfp410.h index 68c31d79c571..aef35e48bc7e 100644 --- a/include/video/omap-panel-tfp410.h +++ b/include/video/omap-panel-tfp410.h @@ -28,7 +28,7 @@ struct omap_dss_device; * @power_down_gpio: gpio number for PD pin (or -1 if not available) */ struct tfp410_platform_data { - u16 i2c_bus_num; + int i2c_bus_num; int power_down_gpio; }; |