diff options
Diffstat (limited to 'Documentation/ABI')
| -rw-r--r-- | Documentation/ABI/stable/sysfs-platform-wmi-bmof | 7 | ||||
| -rw-r--r-- | Documentation/ABI/testing/debugfs-dell-wmi-ddv | 29 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-block-device | 22 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-firmware-attributes | 4 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-class-led-trigger-netdev | 89 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-devices-system-cpu | 2 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-qat | 46 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-driver-ufs | 11 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv | 4 | ||||
| -rw-r--r-- | Documentation/ABI/testing/sysfs-platform-mellanox-bootctl | 9 |
10 files changed, 211 insertions, 12 deletions
diff --git a/Documentation/ABI/stable/sysfs-platform-wmi-bmof b/Documentation/ABI/stable/sysfs-platform-wmi-bmof new file mode 100644 index 000000000000..a786504b6027 --- /dev/null +++ b/Documentation/ABI/stable/sysfs-platform-wmi-bmof @@ -0,0 +1,7 @@ +What: /sys/bus/wmi/devices/05901221-D566-11D1-B2F0-00A0C9062910[-X]/bmof +Date: Jun 2017 +KernelVersion: 4.13 +Description: + Binary MOF metadata used to decribe the details of available ACPI WMI interfaces. + + See Documentation/wmi/devices/wmi-bmof.rst for details. diff --git a/Documentation/ABI/testing/debugfs-dell-wmi-ddv b/Documentation/ABI/testing/debugfs-dell-wmi-ddv index fbcc5d6f7388..81cfc788be15 100644 --- a/Documentation/ABI/testing/debugfs-dell-wmi-ddv +++ b/Documentation/ABI/testing/debugfs-dell-wmi-ddv @@ -3,19 +3,32 @@ Date: September 2022 KernelVersion: 6.1 Contact: Armin Wolf <W_Armin@gmx.de> Description: - This file contains the contents of the fan sensor information buffer, - which contains fan sensor entries and a terminating character (0xFF). + This file contains the contents of the fan sensor information + buffer, which contains fan sensor entries and a terminating + character (0xFF). - Each fan sensor entry consists of three bytes with an unknown meaning, - interested people may use this file for reverse-engineering. + Each fan sensor entry contains: + + - fan type (single byte) + - fan speed in RPM (two bytes, little endian) + + See Documentation/wmi/devices/dell-wmi-ddv.rst for details. What: /sys/kernel/debug/dell-wmi-ddv-<wmi_device_name>/thermal_sensor_information Date: September 2022 KernelVersion: 6.1 Contact: Armin Wolf <W_Armin@gmx.de> Description: - This file contains the contents of the thermal sensor information buffer, - which contains thermal sensor entries and a terminating character (0xFF). + This file contains the contents of the thermal sensor information + buffer, which contains thermal sensor entries and a terminating + character (0xFF). + + Each thermal sensor entry contains: + + - thermal type (single byte) + - current temperature (single byte) + - min. temperature (single byte) + - max. temperature (single byte) + - unknown field (single byte) - Each thermal sensor entry consists of five bytes with an unknown meaning, - interested people may use this file for reverse-engineering. + See Documentation/wmi/devices/dell-wmi-ddv.rst for details. diff --git a/Documentation/ABI/testing/sysfs-block-device b/Documentation/ABI/testing/sysfs-block-device index 7ac7b19b2f72..2d543cfa4079 100644 --- a/Documentation/ABI/testing/sysfs-block-device +++ b/Documentation/ABI/testing/sysfs-block-device @@ -95,3 +95,25 @@ Description: This file does not exist if the HBA driver does not implement support for the SATA NCQ priority feature, regardless of the device support for this feature. + + +What: /sys/block/*/device/cdl_supported +Date: May, 2023 +KernelVersion: v6.5 +Contact: linux-scsi@vger.kernel.org +Description: + (RO) Indicates if the device supports the command duration + limits feature found in some ATA and SCSI devices. + + +What: /sys/block/*/device/cdl_enable +Date: May, 2023 +KernelVersion: v6.5 +Contact: linux-scsi@vger.kernel.org +Description: + (RW) For a device supporting the command duration limits + feature, write to the file to turn on or off the feature. + By default this feature is turned off. + Writing "1" to this file enables the use of command duration + limits for read and write commands in the kernel and turns on + the feature on the device. Writing "0" disables the feature. diff --git a/Documentation/ABI/testing/sysfs-class-firmware-attributes b/Documentation/ABI/testing/sysfs-class-firmware-attributes index 4cdba3477176..1b3ecae80b3d 100644 --- a/Documentation/ABI/testing/sysfs-class-firmware-attributes +++ b/Documentation/ABI/testing/sysfs-class-firmware-attributes @@ -243,8 +243,8 @@ Description: index: Used with HDD and NVME authentication to set the drive index - that is being referenced (e.g hdd0, hdd1 etc) - This attribute defaults to device 0. + that is being referenced (e.g hdd1, hdd2 etc) + This attribute defaults to device 1. certificate, signature, save_signature: These attributes are used for certificate based authentication. This is diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev index 646540950e38..78b62a23b14a 100644 --- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev +++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev @@ -13,6 +13,11 @@ Description: Specifies the duration of the LED blink in milliseconds. Defaults to 50 ms. + With hw_control ON, the interval value MUST be set to the + default value and cannot be changed. + Trying to set any value in this specific mode will return + an EINVAL error. + What: /sys/class/leds/<led>/link Date: Dec 2017 KernelVersion: 4.16 @@ -39,6 +44,9 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal transmission. + With hw_control ON, the blink interval is controlled by hardware + and won't reflect the value set in interval. + What: /sys/class/leds/<led>/rx Date: Dec 2017 KernelVersion: 4.16 @@ -50,3 +58,84 @@ Description: If set to 1, the LED will blink for the milliseconds specified in interval to signal reception. + + With hw_control ON, the blink interval is controlled by hardware + and won't reflect the value set in interval. + +What: /sys/class/leds/<led>/hw_control +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Communicate whether the LED trigger modes are driven by hardware + or software fallback is used. + + If 0, the LED is using software fallback to blink. + + If 1, the LED is using hardware control to blink and signal the + requested modes. + +What: /sys/class/leds/<led>/link_10 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 10Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 10MBps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_100 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 100Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 100Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/link_1000 +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link speed state of 1000Mbps of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link state + speed of 1000Mbps of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/half_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link half duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link half + duplex state of the named network device. + Setting this value also immediately changes the LED state. + +What: /sys/class/leds/<led>/full_duplex +Date: Jun 2023 +KernelVersion: 6.5 +Contact: linux-leds@vger.kernel.org +Description: + Signal the link full duplex state of the named network device. + + If set to 0 (default), the LED's normal state is off. + + If set to 1, the LED's normal state reflects the link full + duplex state of the named network device. + Setting this value also immediately changes the LED state. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index f54867cadb0f..ecd585ca2d50 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -670,7 +670,7 @@ Description: Preferred MTE tag checking mode "async" Prefer asynchronous mode ================ ============================================== - See also: Documentation/arm64/memory-tagging-extension.rst + See also: Documentation/arch/arm64/memory-tagging-extension.rst What: /sys/devices/system/cpu/nohz_full Date: Apr 2015 diff --git a/Documentation/ABI/testing/sysfs-driver-qat b/Documentation/ABI/testing/sysfs-driver-qat index 087842b1969e..ef6d6c57105e 100644 --- a/Documentation/ABI/testing/sysfs-driver-qat +++ b/Documentation/ABI/testing/sysfs-driver-qat @@ -27,7 +27,18 @@ Description: (RW) Reports the current configuration of the QAT device. * sym;asym: the device is configured for running crypto services + * asym;sym: identical to sym;asym * dc: the device is configured for running compression services + * sym: the device is configured for running symmetric crypto + services + * asym: the device is configured for running asymmetric crypto + services + * asym;dc: the device is configured for running asymmetric + crypto services and compression services + * dc;asym: identical to asym;dc + * sym;dc: the device is configured for running symmetric crypto + services and compression services + * dc;sym: identical to sym;dc It is possible to set the configuration only if the device is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state) @@ -47,3 +58,38 @@ Description: (RW) Reports the current configuration of the QAT device. dc This attribute is only available for qat_4xxx devices. + +What: /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled +Date: June 2023 +KernelVersion: 6.5 +Contact: qat-linux@intel.com +Description: (RW) This configuration option provides a way to force the device into remaining in + the MAX power state. + If idle support is enabled the device will transition to the `MIN` power state when + idle, otherwise will stay in the MAX power state. + Write to the file to enable or disable idle support. + + The values are: + + * 0: idle support is disabled + * 1: idle support is enabled + + Default value is 1. + + It is possible to set the pm_idle_enabled value only if the device + is in the `down` state (see /sys/bus/pci/devices/<BDF>/qat/state) + + The following example shows how to change the pm_idle_enabled of + a device:: + + # cat /sys/bus/pci/devices/<BDF>/qat/state + up + # cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled + 1 + # echo down > /sys/bus/pci/devices/<BDF>/qat/state + # echo 0 > /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled + # echo up > /sys/bus/pci/devices/<BDF>/qat/state + # cat /sys/bus/pci/devices/<BDF>/qat/pm_idle_enabled + 0 + + This attribute is only available for qat_4xxx devices. diff --git a/Documentation/ABI/testing/sysfs-driver-ufs b/Documentation/ABI/testing/sysfs-driver-ufs index 228aa43e14ed..d5f44fc5b9dc 100644 --- a/Documentation/ABI/testing/sysfs-driver-ufs +++ b/Documentation/ABI/testing/sysfs-driver-ufs @@ -1426,6 +1426,17 @@ Description: This entry shows the status of WriteBooster buffer flushing If flushing is enabled, the device executes the flush operation when the command queue is empty. +What: /sys/bus/platform/drivers/ufshcd/*/wb_flush_threshold +What: /sys/bus/platform/devices/*.ufs/wb_flush_threshold +Date: June 2023 +Contact: Lu Hongfei <luhongfei@vivo.com> +Description: + wb_flush_threshold represents the threshold for flushing WriteBooster buffer, + whose value expressed in unit of 10% granularity, such as '1' representing 10%, + '2' representing 20%, and so on. + If avail_wb_buff < wb_flush_threshold, it indicates that WriteBooster buffer needs to + be flushed, otherwise it is not necessary. + What: /sys/bus/platform/drivers/ufshcd/*/device_descriptor/hpb_version What: /sys/bus/platform/devices/*.ufs/device_descriptor/hpb_version Date: June 2021 diff --git a/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv b/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv index 1d97ad615c66..a9d39d9e8865 100644 --- a/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv +++ b/Documentation/ABI/testing/sysfs-platform-dell-wmi-ddv @@ -3,5 +3,7 @@ Date: September 2022 KernelVersion: 6.1 Contact: Armin Wolf <W_Armin@gmx.de> Description: - Reports the Dell ePPID (electronic Dell Piece Part Identification) + Reports the Dell ePPID (electronic Piece Part Identification) of the ACPI battery. + + See Documentation/wmi/devices/dell-wmi-ddv.rst for details. diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index 9b99a81babb1..4c5c02d8f870 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -75,3 +75,12 @@ KernelVersion: 6.4 Contact: "Liming Sun <limings@nvidia.com>" Description: The file used to access the BlueField boot fifo. + +What: /sys/bus/platform/devices/MLNXBF04:00/rsh_log +Date: May 2023 +KernelVersion: 6.4 +Contact: "Liming Sun <limings@nvidia.com>" +Description: + The file used to write BlueField boot log with the format + "[INFO|WARN|ERR|ASSERT ]<msg>". Log level 'INFO' is used by + default if not specified. |