diff options
Diffstat (limited to 'Documentation/DocBook/media/v4l/dev-raw-vbi.xml')
| -rw-r--r-- | Documentation/DocBook/media/v4l/dev-raw-vbi.xml | 345 |
1 files changed, 0 insertions, 345 deletions
diff --git a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml deleted file mode 100644 index 78599bbd58f7..000000000000 --- a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml +++ /dev/null @@ -1,345 +0,0 @@ - <title>Raw VBI Data Interface</title> - - <para>VBI is an abbreviation of Vertical Blanking Interval, a gap -in the sequence of lines of an analog video signal. During VBI -no picture information is transmitted, allowing some time while the -electron beam of a cathode ray tube TV returns to the top of the -screen. Using an oscilloscope you will find here the vertical -synchronization pulses and short data packages ASK -modulated<footnote><para>ASK: Amplitude-Shift Keying. A high signal -level represents a '1' bit, a low level a '0' bit.</para></footnote> -onto the video signal. These are transmissions of services such as -Teletext or Closed Caption.</para> - - <para>Subject of this interface type is raw VBI data, as sampled off -a video signal, or to be added to a signal for output. -The data format is similar to uncompressed video images, a number of -lines times a number of samples per line, we call this a VBI image.</para> - - <para>Conventionally V4L2 VBI devices are accessed through character -device special files named <filename>/dev/vbi</filename> and -<filename>/dev/vbi0</filename> to <filename>/dev/vbi31</filename> with -major number 81 and minor numbers 224 to 255. -<filename>/dev/vbi</filename> is typically a symbolic link to the -preferred VBI device. This convention applies to both input and output -devices.</para> - - <para>To address the problems of finding related video and VBI -devices VBI capturing and output is also available as device function -under <filename>/dev/video</filename>. To capture or output raw VBI -data with these devices applications must call the &VIDIOC-S-FMT; -ioctl. Accessed as <filename>/dev/vbi</filename>, raw VBI capturing -or output is the default device function.</para> - - <section> - <title>Querying Capabilities</title> - - <para>Devices supporting the raw VBI capturing or output API set -the <constant>V4L2_CAP_VBI_CAPTURE</constant> or -<constant>V4L2_CAP_VBI_OUTPUT</constant> flags, respectively, in the -<structfield>capabilities</structfield> field of &v4l2-capability; -returned by the &VIDIOC-QUERYCAP; ioctl. At least one of the -read/write, streaming or asynchronous I/O methods must be -supported. VBI devices may or may not have a tuner or modulator.</para> - </section> - - <section> - <title>Supplemental Functions</title> - - <para>VBI devices shall support <link linkend="video">video -input or output</link>, <link linkend="tuner">tuner or -modulator</link>, and <link linkend="control">controls</link> ioctls -as needed. The <link linkend="standard">video standard</link> ioctls provide -information vital to program a VBI device, therefore must be -supported.</para> - </section> - - <section> - <title>Raw VBI Format Negotiation</title> - - <para>Raw VBI sampling abilities can vary, in particular the -sampling frequency. To properly interpret the data V4L2 specifies an -ioctl to query the sampling parameters. Moreover, to allow for some -flexibility applications can also suggest different parameters.</para> - - <para>As usual these parameters are <emphasis>not</emphasis> -reset at &func-open; time to permit Unix tool chains, programming a -device and then reading from it as if it was a plain file. Well -written V4L2 applications should always ensure they really get what -they want, requesting reasonable parameters and then checking if the -actual parameters are suitable.</para> - - <para>To query the current raw VBI capture parameters -applications set the <structfield>type</structfield> field of a -&v4l2-format; to <constant>V4L2_BUF_TYPE_VBI_CAPTURE</constant> or -<constant>V4L2_BUF_TYPE_VBI_OUTPUT</constant>, and call the -&VIDIOC-G-FMT; ioctl with a pointer to this structure. Drivers fill -the &v4l2-vbi-format; <structfield>vbi</structfield> member of the -<structfield>fmt</structfield> union.</para> - - <para>To request different parameters applications set the -<structfield>type</structfield> field of a &v4l2-format; as above and -initialize all fields of the &v4l2-vbi-format; -<structfield>vbi</structfield> member of the -<structfield>fmt</structfield> union, or better just modify the -results of <constant>VIDIOC_G_FMT</constant>, and call the -&VIDIOC-S-FMT; ioctl with a pointer to this structure. Drivers return -an &EINVAL; only when the given parameters are ambiguous, otherwise -they modify the parameters according to the hardware capabilities and -return the actual parameters. When the driver allocates resources at -this point, it may return an &EBUSY; to indicate the returned -parameters are valid but the required resources are currently not -available. That may happen for instance when the video and VBI areas -to capture would overlap, or when the driver supports multiple opens -and another process already requested VBI capturing or output. Anyway, -applications must expect other resource allocation points which may -return <errorcode>EBUSY</errorcode>, at the &VIDIOC-STREAMON; ioctl -and the first read(), write() and select() call.</para> - - <para>VBI devices must implement both the -<constant>VIDIOC_G_FMT</constant> and -<constant>VIDIOC_S_FMT</constant> ioctl, even if -<constant>VIDIOC_S_FMT</constant> ignores all requests and always -returns default parameters as <constant>VIDIOC_G_FMT</constant> does. -<constant>VIDIOC_TRY_FMT</constant> is optional.</para> - - <table pgwide="1" frame="none" id="v4l2-vbi-format"> - <title>struct <structname>v4l2_vbi_format</structname></title> - <tgroup cols="3"> - &cs-str; - <tbody valign="top"> - <row> - <entry>__u32</entry> - <entry><structfield>sampling_rate</structfield></entry> - <entry>Samples per second, i. e. unit 1 Hz.</entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>offset</structfield></entry> - <entry><para>Horizontal offset of the VBI image, -relative to the leading edge of the line synchronization pulse and -counted in samples: The first sample in the VBI image will be located -<structfield>offset</structfield> / -<structfield>sampling_rate</structfield> seconds following the leading -edge. See also <xref linkend="vbi-hsync" />.</para></entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>samples_per_line</structfield></entry> - <entry></entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>sample_format</structfield></entry> - <entry><para>Defines the sample format as in <xref -linkend="pixfmt" />, a four-character-code.<footnote> - <para>A few devices may be unable to -sample VBI data at all but can extend the video capture window to the -VBI region.</para> - </footnote> Usually this is -<constant>V4L2_PIX_FMT_GREY</constant>, i. e. each sample -consists of 8 bits with lower values oriented towards the black level. -Do not assume any other correlation of values with the signal level. -For example, the MSB does not necessarily indicate if the signal is -'high' or 'low' because 128 may not be the mean value of the -signal. Drivers shall not convert the sample format by software.</para></entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>start</structfield>[2]</entry> - <entry>This is the scanning system line number -associated with the first line of the VBI image, of the first and the -second field respectively. See <xref linkend="vbi-525" /> and -<xref linkend="vbi-625" /> for valid values. -The <constant>V4L2_VBI_ITU_525_F1_START</constant>, -<constant>V4L2_VBI_ITU_525_F2_START</constant>, -<constant>V4L2_VBI_ITU_625_F1_START</constant> and -<constant>V4L2_VBI_ITU_625_F2_START</constant> defines give the start line -numbers for each field for each 525 or 625 line format as a convenience. -Don't forget that ITU line numbering starts at 1, not 0. -VBI input drivers can return start values 0 if the hardware cannot -reliable identify scanning lines, VBI acquisition may not require this -information.</entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>count</structfield>[2]</entry> - <entry>The number of lines in the first and second -field image, respectively.</entry> - </row> - <row> - <entry spanname="hspan"><para>Drivers should be as -flexibility as possible. For example, it may be possible to extend or -move the VBI capture window down to the picture area, implementing a -'full field mode' to capture data service transmissions embedded in -the picture.</para><para>An application can set the first or second -<structfield>count</structfield> value to zero if no data is required -from the respective field; <structfield>count</structfield>[1] if the -scanning system is progressive, &ie; not interlaced. The -corresponding start value shall be ignored by the application and -driver. Anyway, drivers may not support single field capturing and -return both count values non-zero.</para><para>Both -<structfield>count</structfield> values set to zero, or line numbers -outside the bounds depicted in <xref linkend="vbi-525" /> and <xref - linkend="vbi-625" />, or a field image covering -lines of two fields, are invalid and shall not be returned by the -driver.</para><para>To initialize the <structfield>start</structfield> -and <structfield>count</structfield> fields, applications must first -determine the current video standard selection. The &v4l2-std-id; or -the <structfield>framelines</structfield> field of &v4l2-standard; can -be evaluated for this purpose.</para></entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>flags</structfield></entry> - <entry>See <xref linkend="vbifmt-flags" /> below. Currently -only drivers set flags, applications must set this field to -zero.</entry> - </row> - <row> - <entry>__u32</entry> - <entry><structfield>reserved</structfield>[2]</entry> - <entry>This array is reserved for future extensions. -Drivers and applications must set it to zero.</entry> - </row> - </tbody> - </tgroup> - </table> - - <table pgwide="1" frame="none" id="vbifmt-flags"> - <title>Raw VBI Format Flags</title> - <tgroup cols="3"> - &cs-def; - <tbody valign="top"> - <row> - <entry><constant>V4L2_VBI_UNSYNC</constant></entry> - <entry>0x0001</entry> - <entry><para>This flag indicates hardware which does not -properly distinguish between fields. Normally the VBI image stores the -first field (lower scanning line numbers) first in memory. This may be -a top or bottom field depending on the video standard. When this flag -is set the first or second field may be stored first, however the -fields are still in correct temporal order with the older field first -in memory.<footnote> - <para>Most VBI services transmit on both fields, but -some have different semantics depending on the field number. These -cannot be reliable decoded or encoded when -<constant>V4L2_VBI_UNSYNC</constant> is set.</para> - </footnote></para></entry> - </row> - <row> - <entry><constant>V4L2_VBI_INTERLACED</constant></entry> - <entry>0x0002</entry> - <entry>By default the two field images will be passed -sequentially; all lines of the first field followed by all lines of -the second field (compare <xref linkend="field-order" /> -<constant>V4L2_FIELD_SEQ_TB</constant> and -<constant>V4L2_FIELD_SEQ_BT</constant>, whether the top or bottom -field is first in memory depends on the video standard). When this -flag is set, the two fields are interlaced (cf. -<constant>V4L2_FIELD_INTERLACED</constant>). The first line of the -first field followed by the first line of the second field, then the -two second lines, and so on. Such a layout may be necessary when the -hardware has been programmed to capture or output interlaced video -images and is unable to separate the fields for VBI capturing at -the same time. For simplicity setting this flag implies that both -<structfield>count</structfield> values are equal and non-zero.</entry> - </row> - </tbody> - </tgroup> - </table> - - <figure id="vbi-hsync"> - <title>Line synchronization</title> - <mediaobject> - <imageobject> - <imagedata fileref="vbi_hsync.pdf" format="PS" /> - </imageobject> - <imageobject> - <imagedata fileref="vbi_hsync.gif" format="GIF" /> - </imageobject> - <textobject> - <phrase>Line synchronization diagram</phrase> - </textobject> - </mediaobject> - </figure> - - <figure id="vbi-525"> - <title>ITU-R 525 line numbering (M/NTSC and M/PAL)</title> - <mediaobject> - <imageobject> - <imagedata fileref="vbi_525.pdf" format="PS" /> - </imageobject> - <imageobject> - <imagedata fileref="vbi_525.gif" format="GIF" /> - </imageobject> - <textobject> - <phrase>NTSC field synchronization diagram</phrase> - </textobject> - <caption> - <para>(1) For the purpose of this specification field 2 -starts in line 264 and not 263.5 because half line capturing is not -supported.</para> - </caption> - </mediaobject> - </figure> - - <figure id="vbi-625"> - <title>ITU-R 625 line numbering</title> - <mediaobject> - <imageobject> - <imagedata fileref="vbi_625.pdf" format="PS" /> - </imageobject> - <imageobject> - <imagedata fileref="vbi_625.gif" format="GIF" /> - </imageobject> - <textobject> - <phrase>PAL/SECAM field synchronization diagram</phrase> - </textobject> - <caption> - <para>(1) For the purpose of this specification field 2 -starts in line 314 and not 313.5 because half line capturing is not -supported.</para> - </caption> - </mediaobject> - </figure> - - <para>Remember the VBI image format depends on the selected -video standard, therefore the application must choose a new standard or -query the current standard first. Attempts to read or write data ahead -of format negotiation, or after switching the video standard which may -invalidate the negotiated VBI parameters, should be refused by the -driver. A format change during active I/O is not permitted.</para> - </section> - - <section> - <title>Reading and writing VBI images</title> - - <para>To assure synchronization with the field number and easier -implementation, the smallest unit of data passed at a time is one -frame, consisting of two fields of VBI images immediately following in -memory.</para> - - <para>The total size of a frame computes as follows:</para> - - <programlisting> -(<structfield>count</structfield>[0] + <structfield>count</structfield>[1]) * -<structfield>samples_per_line</structfield> * sample size in bytes</programlisting> - - <para>The sample size is most likely always one byte, -applications must check the <structfield>sample_format</structfield> -field though, to function properly with other drivers.</para> - - <para>A VBI device may support <link - linkend="rw">read/write</link> and/or streaming (<link - linkend="mmap">memory mapping</link> or <link - linkend="userp">user pointer</link>) I/O. The latter bears the -possibility of synchronizing video and -VBI data by using buffer timestamps.</para> - - <para>Remember the &VIDIOC-STREAMON; ioctl and the first read(), -write() and select() call can be resource allocation points returning -an &EBUSY; if the required hardware resources are temporarily -unavailable, for example the device is already in use by another -process.</para> - </section> |