diff options
Diffstat (limited to 'Documentation/PCI/pci-error-recovery.txt')
| -rw-r--r-- | Documentation/PCI/pci-error-recovery.txt | 35 |
1 files changed, 25 insertions, 10 deletions
diff --git a/Documentation/PCI/pci-error-recovery.txt b/Documentation/PCI/pci-error-recovery.txt index 0b6bb3ef449e..688b69121e82 100644 --- a/Documentation/PCI/pci-error-recovery.txt +++ b/Documentation/PCI/pci-error-recovery.txt @@ -110,7 +110,7 @@ The actual steps taken by a platform to recover from a PCI error event will be platform-dependent, but will follow the general sequence described below. -STEP 0: Error Event +STEP 0: Error Event: ERR_NONFATAL ------------------- A PCI bus error is detected by the PCI hardware. On powerpc, the slot is isolated, in that all I/O is blocked: all reads return 0xffffffff, @@ -228,13 +228,7 @@ proceeds to either STEP3 (Link Reset) or to STEP 5 (Resume Operations). If any driver returned PCI_ERS_RESULT_NEED_RESET, then the platform proceeds to STEP 4 (Slot Reset) -STEP 3: Link Reset ------------------- -The platform resets the link. This is a PCI-Express specific step -and is done whenever a fatal error has been detected that can be -"solved" by resetting the link. - -STEP 4: Slot Reset +STEP 3: Slot Reset ------------------ In response to a return value of PCI_ERS_RESULT_NEED_RESET, the @@ -320,7 +314,7 @@ Failure). >>> However, it probably should. -STEP 5: Resume Operations +STEP 4: Resume Operations ------------------------- The platform will call the resume() callback on all affected device drivers if all drivers on the segment have returned @@ -332,7 +326,7 @@ a result code. At this point, if a new error happens, the platform will restart a new error recovery sequence. -STEP 6: Permanent Failure +STEP 5: Permanent Failure ------------------------- A "permanent failure" has occurred, and the platform cannot recover the device. The platform will call error_detected() with a @@ -355,6 +349,27 @@ errors. See the discussion in powerpc/eeh-pci-error-recovery.txt for additional detail on real-life experience of the causes of software errors. +STEP 0: Error Event: ERR_FATAL +------------------- +PCI bus error is detected by the PCI hardware. On powerpc, the slot is +isolated, in that all I/O is blocked: all reads return 0xffffffff, all +writes are ignored. + +STEP 1: Remove devices +-------------------- +Platform removes the devices depending on the error agent, it could be +this port for all subordinates or upstream component (likely downstream +port) + +STEP 2: Reset link +-------------------- +The platform resets the link. This is a PCI-Express specific step and is +done whenever a fatal error has been detected that can be "solved" by +resetting the link. + +STEP 3: Re-enumerate the devices +-------------------- +Initiates the re-enumeration. Conclusion; General Remarks --------------------------- |