diff options
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 92 |
1 files changed, 73 insertions, 19 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 9871e649ffef..81d1d5a74728 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -856,6 +856,11 @@ causing system reset or hang due to sending INIT from AP to BSP. + disable_counter_freezing [HW] + Disable Intel PMU counter freezing feature. + The feature only exists starting from + Arch Perfmon v4 (Skylake and newer). + disable_ddw [PPC/PSERIES] Disable Dynamic DMA Window support. Use this if to workaround buggy firmware. @@ -1063,7 +1068,7 @@ earlyprintk=serial[,0x...[,baudrate]] earlyprintk=ttySn[,baudrate] earlyprintk=dbgp[debugController#] - earlyprintk=pciserial,bus:device.function[,baudrate] + earlyprintk=pciserial[,force],bus:device.function[,baudrate] earlyprintk=xdbc[xhciController#] earlyprintk is useful when the kernel crashes before @@ -1095,6 +1100,10 @@ The sclp output can only be used on s390. + The optional "force" to "pciserial" enables use of a + PCI device even when its classcode is not of the + UART class. + edac_report= [HW,EDAC] Control how to report EDAC event Format: {"on" | "off" | "force"} on: enable EDAC to report H/W event. May be overridden @@ -1385,6 +1394,11 @@ hvc_iucv_allow= [S390] Comma-separated list of z/VM user IDs. If specified, z/VM IUCV HVC accepts connections from listed z/VM user IDs only. + + hv_nopvspin [X86,HYPER_V] Disables the paravirt spinlock optimizations + which allow the hypervisor to 'idle' the + guest on lock contention. + keep_bootcon [KNL] Do not unregister boot console at start. This is only useful for debugging when something happens in the window @@ -1749,12 +1763,24 @@ nobypass [PPC/POWERNV] Disable IOMMU bypass, using IOMMU for PCI devices. + iommu.strict= [ARM64] Configure TLB invalidation behaviour + Format: { "0" | "1" } + 0 - Lazy mode. + Request that DMA unmap operations use deferred + invalidation of hardware TLBs, for increased + throughput at the cost of reduced device isolation. + Will fall back to strict mode if not supported by + the relevant IOMMU driver. + 1 - Strict mode (default). + DMA unmap operations invalidate IOMMU hardware TLBs + synchronously. + iommu.passthrough= [ARM64] Configure DMA to bypass the IOMMU by default. Format: { "0" | "1" } 0 - Use IOMMU translation for DMA. 1 - Bypass the IOMMU for DMA. - unset - Use IOMMU translation for DMA. + unset - Use value of CONFIG_IOMMU_DEFAULT_PASSTHROUGH. io7= [HW] IO7 for Marvel based alpha systems See comment before marvel_specify_io7 in @@ -2274,6 +2300,8 @@ ltpc= [NET] Format: <io>,<irq>,<dma> + lsm.debug [SECURITY] Enable LSM initialization debugging output. + machvec= [IA-64] Force the use of a particular machine-vector (machvec) in a generic kernel. Example: machvec=hpzx1_swiotlb @@ -2404,7 +2432,7 @@ seconds. Use this parameter to check at some other rate. 0 disables periodic checking. - memtest= [KNL,X86,ARM] Enable memtest + memtest= [KNL,X86,ARM,PPC] Enable memtest Format: <integer> default : 0 <disable> Specifies the number of memtest passes to be @@ -3523,6 +3551,12 @@ ramdisk_size= [RAM] Sizes of RAM disks in kilobytes See Documentation/blockdev/ramdisk.txt. + random.trust_cpu={on,off} + [KNL] Enable or disable trusting the use of the + CPU's random number generator (if available) to + fully seed the kernel's CRNG. Default is controlled + by CONFIG_RANDOM_TRUST_CPU. + ras=option[,option,...] [KNL] RAS-specific options cec_disable [X86] @@ -3534,14 +3568,14 @@ In kernels built with CONFIG_RCU_NOCB_CPU=y, set the specified list of CPUs to be no-callback CPUs. - Invocation of these CPUs' RCU callbacks will - be offloaded to "rcuox/N" kthreads created for - that purpose, where "x" is "b" for RCU-bh, "p" - for RCU-preempt, and "s" for RCU-sched, and "N" - is the CPU number. This reduces OS jitter on the - offloaded CPUs, which can be useful for HPC and - real-time workloads. It can also improve energy - efficiency for asymmetric multiprocessors. + Invocation of these CPUs' RCU callbacks will be + offloaded to "rcuox/N" kthreads created for that + purpose, where "x" is "p" for RCU-preempt, and + "s" for RCU-sched, and "N" is the CPU number. + This reduces OS jitter on the offloaded CPUs, + which can be useful for HPC and real-time + workloads. It can also improve energy efficiency + for asymmetric multiprocessors. rcu_nocb_poll [KNL] Rather than requiring that offloaded CPUs @@ -3595,7 +3629,14 @@ Set required age in jiffies for a given grace period before RCU starts soliciting quiescent-state help from - rcu_note_context_switch(). + rcu_note_context_switch(). If not specified, the + kernel will calculate a value based on the most + recent settings of rcutree.jiffies_till_first_fqs + and rcutree.jiffies_till_next_fqs. + This calculated value may be viewed in + rcutree.jiffies_to_sched_qs. Any attempt to + set rcutree.jiffies_to_sched_qs will be + cheerfully overwritten. rcutree.jiffies_till_first_fqs= [KNL] Set delay from grace-period initialization to @@ -3863,12 +3904,6 @@ rcupdate.rcu_self_test= [KNL] Run the RCU early boot self tests - rcupdate.rcu_self_test_bh= [KNL] - Run the RCU bh early boot self tests - - rcupdate.rcu_self_test_sched= [KNL] - Run the RCU sched early boot self tests - rdinit= [KNL] Format: <full_path> Run specified binary instead of /init from the ramdisk, @@ -4604,7 +4639,8 @@ usbcore.old_scheme_first= [USB] Start with the old device initialization - scheme (default 0 = off). + scheme, applies only to low and full-speed devices + (default 0 = off). usbcore.usbfs_memory_mb= [USB] Memory limit (in MB) for buffers allocated by @@ -4819,6 +4855,18 @@ This is actually a boot loader parameter; the value is passed to the kernel using a special protocol. + vm_debug[=options] [KNL] Available with CONFIG_DEBUG_VM=y. + May slow down system boot speed, especially when + enabled on systems with a large amount of memory. + All options are enabled by default, and this + interface is meant to allow for selectively + enabling or disabling specific virtual memory + debugging features. + + Available options are: + P Enable page structure init time poisoning + - Disable all of the above options + vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact size of <nn>. This can be used to increase the minimum size (128MB on x86). It can also be used to @@ -4994,6 +5042,12 @@ Disables the PV optimizations forcing the HVM guest to run as generic HVM guest with no PV drivers. + xen_scrub_pages= [XEN] + Boolean option to control scrubbing pages before giving them back + to Xen, for use by other domains. Can be also changed at runtime + with /sys/devices/system/xen_memory/xen_memory0/scrub_pages. + Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT. + xirc2ps_cs= [NET,PCMCIA] Format: <irq>,<irq_mask>,<io>,<full_duplex>,<do_sound>,<lockup_hack>[,<irq2>[,<irq3>[,<irq4>]]] |