diff options
Diffstat (limited to 'Documentation/arm')
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/Overview.txt | 35 | ||||
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/S3C2412.txt | 120 | ||||
| -rw-r--r-- | Documentation/arm/Samsung-S3C24XX/S3C2413.txt | 21 | ||||
| -rw-r--r-- | Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen | 61 | ||||
| -rw-r--r-- | Documentation/arm/Sharp-LH/LCDPanels | 59 |
5 files changed, 275 insertions, 21 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index 8c6ee684174c..3e46d2a31158 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -7,11 +7,13 @@ Introduction ------------ The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported - by the 's3c2410' architecture of ARM Linux. Currently the S3C2410 and - the S3C2440 are supported CPUs. + by the 's3c2410' architecture of ARM Linux. Currently the S3C2410, + S3C2440 and S3C2442 devices are supported. Support for the S3C2400 series is in progress. + Support for the S3C2412 and S3C2413 CPUs is being merged. + Configuration ------------- @@ -43,9 +45,18 @@ Machines Samsung's own development board, geared for PDA work. + Samsung/Aiji SMDK2412 + + The S3C2412 version of the SMDK2440. + + Samsung/Aiji SMDK2413 + + The S3C2412 version of the SMDK2440. + Samsung/Meritech SMDK2440 - The S3C2440 compatible version of the SMDK2440 + The S3C2440 compatible version of the SMDK2440, which has the + option of an S3C2440 or S3C2442 CPU module. Thorcom VR1000 @@ -211,24 +222,6 @@ Port Contributors Lucas Correia Villa Real (S3C2400 port) -Document Changes ----------------- - - 05 Sep 2004 - BJD - Added Document Changes section - 05 Sep 2004 - BJD - Added Klaus Fetscher to list of contributors - 25 Oct 2004 - BJD - Added Dimitry Andric to list of contributors - 25 Oct 2004 - BJD - Updated the MTD from the 2.6.9 merge - 21 Jan 2005 - BJD - Added rx3715, added Shannon to contributors - 10 Feb 2005 - BJD - Added Guillaume Gourat to contributors - 02 Mar 2005 - BJD - Added SMDK2440 to list of machines - 06 Mar 2005 - BJD - Added Christer Weinigel - 08 Mar 2005 - BJD - Added LCVR to list of people, updated introduction - 08 Mar 2005 - BJD - Added section on adding machines - 09 Sep 2005 - BJD - Added section on platform data - 11 Feb 2006 - BJD - Added I2C, RTC and Watchdog sections - 11 Feb 2006 - BJD - Added Osiris machine, and S3C2400 information - - Document Author --------------- diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2412.txt b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt new file mode 100644 index 000000000000..cb82a7fc7901 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/S3C2412.txt @@ -0,0 +1,120 @@ + S3C2412 ARM Linux Overview + ========================== + +Introduction +------------ + + The S3C2412 is part of the S3C24XX range of ARM9 System-on-Chip CPUs + from Samsung. This part has an ARM926-EJS core, capable of running up + to 266MHz (see data-sheet for more information) + + +Clock +----- + + The core clock code provides a set of clocks to the drivers, and allows + for source selection and a number of other features. + + +Power +----- + + No support for suspend/resume to RAM in the current system. + + +DMA +--- + + No current support for DMA. + + +GPIO +---- + + There is support for setting the GPIO to input/output/special function + and reading or writing to them. + + +UART +---- + + The UART hardware is similar to the S3C2440, and is supported by the + s3c2410 driver in the drivers/serial directory. + + +NAND +---- + + The NAND hardware is similar to the S3C2440, and is supported by the + s3c2410 driver in the drivers/mtd/nand directory. + + +USB Host +-------- + + The USB hardware is similar to the S3C2410, with extended clock source + control. The OHCI portion is supported by the ohci-s3c2410 driver, and + the clock control selection is supported by the core clock code. + + +USB Device +---------- + + No current support in the kernel + + +IRQs +---- + + All the standard, and external interrupt sources are supported. The + extra sub-sources are not yet supported. + + +RTC +--- + + The RTC hardware is similar to the S3C2410, and is supported by the + s3c2410-rtc driver. + + +Watchdog +-------- + + The watchdog harware is the same as the S3C2410, and is supported by + the s3c2410_wdt driver. + + +MMC/SD/SDIO +----------- + + No current support for the MMC/SD/SDIO block. + +IIC +--- + + The IIC hardware is the same as the S3C2410, and is supported by the + i2c-s3c24xx driver. + + +IIS +--- + + No current support for the IIS interface. + + +SPI +--- + + No current support for the SPI interfaces. + + +ATA +--- + + No current support for the on-board ATA block. + + +Document Author +--------------- + +Ben Dooks, (c) 2006 Simtec Electronics diff --git a/Documentation/arm/Samsung-S3C24XX/S3C2413.txt b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt new file mode 100644 index 000000000000..ab2a88858f12 --- /dev/null +++ b/Documentation/arm/Samsung-S3C24XX/S3C2413.txt @@ -0,0 +1,21 @@ + S3C2413 ARM Linux Overview + ========================== + +Introduction +------------ + + The S3C2413 is an extended version of the S3C2412, with an camera + interface and mobile DDR memory support. See the S3C2412 support + documentation for more information. + + +Camera Interface +--------------- + + This block is currently not supported. + + +Document Author +--------------- + +Ben Dooks, (c) 2006 Simtec Electronics diff --git a/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen new file mode 100644 index 000000000000..1e6a23fdf2fc --- /dev/null +++ b/Documentation/arm/Sharp-LH/ADC-LH7-Touchscreen @@ -0,0 +1,61 @@ +README on the ADC/Touchscreen Controller +======================================== + +The LH79524 and LH7A404 include a built-in Analog to Digital +controller (ADC) that is used to process input from a touchscreen. +The driver only implements a four-wire touch panel protocol. + +The touchscreen driver is maintenance free except for the pen-down or +touch threshold. Some resistive displays and board combinations may +require tuning of this threshold. The driver exposes some of it's +internal state in the sys filesystem. If the kernel is configured +with it, CONFIG_SYSFS, and sysfs is mounted at /sys, there will be a +directory + + /sys/devices/platform/adc-lh7.0 + +containing these files. + + -r--r--r-- 1 root root 4096 Jan 1 00:00 samples + -rw-r--r-- 1 root root 4096 Jan 1 00:00 threshold + -r--r--r-- 1 root root 4096 Jan 1 00:00 threshold_range + +The threshold is the current touch threshold. It defaults to 750 on +most targets. + + # cat threshold + 750 + +The threshold_range contains the range of valid values for the +threshold. Values outside of this range will be silently ignored. + + # cat threshold_range + 0 1023 + +To change the threshold, write a value to the threshold file. + + # echo 500 > threshold + # cat threshold + 500 + +The samples file contains the most recently sampled values from the +ADC. There are 12. Below are typical of the last sampled values when +the pen has been released. The first two and last two samples are for +detecting whether or not the pen is down. The third through sixth are +X coordinate samples. The seventh through tenth are Y coordinate +samples. + + # cat samples + 1023 1023 0 0 0 0 530 529 530 529 1023 1023 + +To determine a reasonable threshold, press on the touch panel with an +appropriate stylus and read the values from samples. + + # cat samples + 1023 676 92 103 101 102 855 919 922 922 1023 679 + +The first and eleventh samples are discarded. Thus, the important +values are the second and twelfth which are used to determine if the +pen is down. When both are below the threshold, the driver registers +that the pen is down. When either is above the threshold, it +registers then pen is up. diff --git a/Documentation/arm/Sharp-LH/LCDPanels b/Documentation/arm/Sharp-LH/LCDPanels new file mode 100644 index 000000000000..fb1b21c2f2f4 --- /dev/null +++ b/Documentation/arm/Sharp-LH/LCDPanels @@ -0,0 +1,59 @@ +README on the LCD Panels +======================== + +Configuration options for several LCD panels, available from Logic PD, +are included in the kernel source. This README will help you +understand the configuration data and give you some guidance for +adding support for other panels if you wish. + + +lcd-panels.h +------------ + +There is no way, at present, to detect which panel is attached to the +system at runtime. Thus the kernel configuration is static. The file +arch/arm/mach-ld7a40x/lcd-panels.h (or similar) defines all of the +panel specific parameters. + +It should be possible for this data to be shared among several device +families. The current layout may be insufficiently general, but it is +amenable to improvement. + + +PIXEL_CLOCK +----------- + +The panel data sheets will give a range of acceptable pixel clocks. +The fundamental LCDCLK input frequency is divided down by a PCD +constant in field '.tim2'. It may happen that it is impossible to set +the pixel clock within this range. A clock which is too slow will +tend to flicker. For the highest quality image, set the clock as high +as possible. + + +MARGINS +------- + +These values may be difficult to glean from the panel data sheet. In +the case of the Sharp panels, the upper margin is explicitly called +out as a specific number of lines from the top of the frame. The +other values may not matter as much as the panels tend to +automatically center the image. + + +Sync Sense +---------- + +The sense of the hsync and vsync pulses may be called out in the data +sheet. On one panel, the sense of these pulses determine the height +of the visible region on the panel. Most of the Sharp panels use +negative sense sync pulses set by the TIM2_IHS and TIM2_IVS bits in +'.tim2'. + + +Pel Layout +---------- + +The Sharp color TFT panels are all configured for 16 bit direct color +modes. The amba-lcd driver sets the pel mode to 565 for 5 bits of +each red and blue and 6 bits of green. |