diff options
Diffstat (limited to 'Documentation/arm')
| -rw-r--r-- | Documentation/arm/keystone/Overview.txt | 73 |
1 files changed, 73 insertions, 0 deletions
diff --git a/Documentation/arm/keystone/Overview.txt b/Documentation/arm/keystone/Overview.txt new file mode 100644 index 000000000000..f17bc4c9dff9 --- /dev/null +++ b/Documentation/arm/keystone/Overview.txt @@ -0,0 +1,73 @@ + TI Keystone Linux Overview + -------------------------- + +Introduction +------------ +Keystone range of SoCs are based on ARM Cortex-A15 MPCore Processors +and c66x DSP cores. This document describes essential information required +for users to run Linux on Keystone based EVMs from Texas Instruments. + +Following SoCs & EVMs are currently supported:- + +------------ K2HK SoC and EVM -------------------------------------------------- + +a.k.a Keystone 2 Hawking/Kepler SoC +TCI6636K2H & TCI6636K2K: See documentation at + http://www.ti.com/product/tci6638k2k + http://www.ti.com/product/tci6638k2h + +EVM: +http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx + +------------ K2E SoC and EVM --------------------------------------------------- + +a.k.a Keystone 2 Edison SoC +K2E - 66AK2E05: See documentation at + http://www.ti.com/product/66AK2E05/technicaldocuments + +EVM: +https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html + +------------ K2L SoC and EVM --------------------------------------------------- + +a.k.a Keystone 2 Lamarr SoC +K2L - TCI6630K2L: See documentation at + http://www.ti.com/product/TCI6630K2L/technicaldocuments +EVM: +https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html + +Configuration +------------- + +All of the K2 SoCs/EVMs share a common defconfig, keystone_defconfig and same +image is used to boot on individual EVMs. The platform configuration is +specified through DTS. Following are the DTS used:- + K2HK EVM : k2hk-evm.dts + K2E EVM : k2e-evm.dts + K2L EVM : k2l-evm.dts + +The device tree documentation for the keystone machines are located at + Documentation/devicetree/bindings/arm/keystone/keystone.txt + +Known issues & workaround +------------------------- + +Some of the device drivers used on keystone are re-used from that from +DaVinci and other TI SoCs. These device drivers may use clock APIs directly. +Some of the keystone specific drivers such as netcp uses run time power +management API instead to enable clock. As this API has limitations on +keystone, following workaround is needed to boot Linux. + + Add 'clk_ignore_unused' to the bootargs env variable in u-boot. Otherwise + clock frameworks will try to disable clocks that are unused and disable + the hardware. This is because netcp related power domain and clock + domains are enabled in u-boot as run time power management API currently + doesn't enable clocks for netcp due to a limitation. This workaround is + expected to be removed in the future when proper API support becomes + available. Until then, this work around is needed. + + +Document Author +--------------- +Murali Karicheri <m-karicheri2@ti.com> +Copyright 2015 Texas Instruments |