1 files changed, 0 insertions, 70 deletions
diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
deleted file mode 100644
index 4cd81742038f..000000000000
--- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt
+++ /dev/null
@@ -1,70 +0,0 @@
-ARM System Controller ICST clocks
-
-The ICS525 and ICS307 oscillators are produced by Integrated Devices
-Technology (IDT). ARM integrated these oscillators deeply into their
-reference designs by adding special control registers that manage such
-oscillators to their system controllers.
-
-The various ARM system controllers contain logic to serialize and initialize
-an ICST clock request after a write to the 32 bit register at an offset
-into the system controller. Furthermore, to even be able to alter one of
-these frequencies, the system controller must first be unlocked by
-writing a special token to another offset in the system controller.
-
-Some ARM hardware contain special versions of the serial interface that only
-connects the low 8 bits of the VDW (missing one bit), hardwires RDW to
-different values and sometimes also hardwire the output divider. They
-therefore have special compatible strings as per this table (the OD value is
-the value on the pins, not the resulting output divider):
-
-Hardware variant:        RDW     OD          VDW
-
-Integrator/AP            22      1           Bit 8 0, rest variable
-integratorap-cm
-
-Integrator/AP            46      3           Bit 8 0, rest variable
-integratorap-sys
-
-Integrator/AP            22 or   1           17 or (33 or 25 MHz)
-integratorap-pci         14      1           14
-
-Integrator/CP            22      variable    Bit 8 0, rest variable
-integratorcp-cm-core
-
-Integrator/CP            22      variable    Bit 8 0, rest variable
-integratorcp-cm-mem
-
-The ICST oscillator must be provided inside a system controller node.
-
-Required properties:
-- compatible: must be one of
-  "arm,syscon-icst525"
-  "arm,syscon-icst307"
-  "arm,syscon-icst525-integratorap-cm"
-  "arm,syscon-icst525-integratorap-sys"
-  "arm,syscon-icst525-integratorap-pci"
-  "arm,syscon-icst525-integratorcp-cm-core"
-  "arm,syscon-icst525-integratorcp-cm-mem"
-- lock-offset: the offset address into the system controller where the
-  unlocking register is located
-- vco-offset: the offset address into the system controller where the
-  ICST control register is located (even 32 bit address)
-- #clock-cells: must be <0>
-- clocks: parent clock, since the ICST needs a parent clock to derive its
-  frequency from, this attribute is compulsory.
-
-Example:
-
-syscon: syscon@10000000 {
-	compatible = "syscon";
-	reg = <0x10000000 0x1000>;
-
-	oscclk0: osc0@c {
-		compatible = "arm,syscon-icst307";
-		#clock-cells = <0>;
-		lock-offset = <0x20>;
-		vco-offset = <0x0c>;
-		clocks = <&xtal24mhz>;
-	};
-	(...)
-};