diff options
Diffstat (limited to 'Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt | 313 |
1 files changed, 0 insertions, 313 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt deleted file mode 100644 index ab730ea0a560..000000000000 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ /dev/null @@ -1,313 +0,0 @@ -Broadcom iProc Family Clocks - -This binding uses the common clock binding: - Documentation/devicetree/bindings/clock/clock-bindings.txt - -The iProc clock controller manages clocks that are common to the iProc family. -An SoC from the iProc family may have several PPLs, e.g., ARMPLL, GENPLL, -LCPLL0, MIPIPLL, and etc., all derived from an onboard crystal. Each PLL -comprises of several leaf clocks - -Required properties for a PLL and its leaf clocks: - -- compatible: - Should have a value of the form "brcm,<soc>-<pll>". For example, GENPLL on -Cygnus has a compatible string of "brcm,cygnus-genpll" - -- #clock-cells: - Have a value of <1> since there are more than 1 leaf clock of a given PLL - -- reg: - Define the base and range of the I/O address space that contain the iProc -clock control registers required for the PLL - -- clocks: - The input parent clock phandle for the PLL. For most iProc PLLs, this is an -onboard crystal with a fixed rate - -- clock-output-names: - An ordered list of strings defining the names of the clocks - -Example: - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - genpll: genpll { - #clock-cells = <1>; - compatible = "brcm,cygnus-genpll"; - reg = <0x0301d000 0x2c>, <0x0301c020 0x4>; - clocks = <&osc>; - clock-output-names = "genpll", "axi21", "250mhz", "ihost_sys", - "enet_sw", "audio_125", "can"; - }; - -Required properties for ASIU clocks: - -ASIU clocks are a special case. These clocks are derived directly from the -reference clock of the onboard crystal - -- compatible: - Should have a value of the form "brcm,<soc>-asiu-clk". For example, ASIU -clocks for Cygnus have a compatible string of "brcm,cygnus-asiu-clk" - -- #clock-cells: - Have a value of <1> since there are more than 1 ASIU clocks - -- reg: - Define the base and range of the I/O address space that contain the iProc -clock control registers required for ASIU clocks - -- clocks: - The input parent clock phandle for the ASIU clock, i.e., the onboard -crystal - -- clock-output-names: - An ordered list of strings defining the names of the ASIU clocks - -Example: - - osc: oscillator { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <25000000>; - }; - - asiu_clks: asiu_clks { - #clock-cells = <1>; - compatible = "brcm,cygnus-asiu-clk"; - reg = <0x0301d048 0xc>, <0x180aa024 0x4>; - clocks = <&osc>; - clock-output-names = "keypad", "adc/touch", "pwm"; - }; - -Cygnus ------- -PLL and leaf clock compatible strings for Cygnus are: - "brcm,cygnus-armpll" - "brcm,cygnus-genpll" - "brcm,cygnus-lcpll0" - "brcm,cygnus-mipipll" - "brcm,cygnus-asiu-clk" - "brcm,cygnus-audiopll" - -The following table defines the set of PLL/clock index and ID for Cygnus. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-cygnus.h" - - Clock Source (Parent) Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - keypad crystal (ASIU) 0 BCM_CYGNUS_ASIU_KEYPAD_CLK - adc/tsc crystal (ASIU) 1 BCM_CYGNUS_ASIU_ADC_CLK - pwm crystal (ASIU) 2 BCM_CYGNUS_ASIU_PWM_CLK - - genpll crystal 0 BCM_CYGNUS_GENPLL - axi21 genpll 1 BCM_CYGNUS_GENPLL_AXI21_CLK - 250mhz genpll 2 BCM_CYGNUS_GENPLL_250MHZ_CLK - ihost_sys genpll 3 BCM_CYGNUS_GENPLL_IHOST_SYS_CLK - enet_sw genpll 4 BCM_CYGNUS_GENPLL_ENET_SW_CLK - audio_125 genpll 5 BCM_CYGNUS_GENPLL_AUDIO_125_CLK - can genpll 6 BCM_CYGNUS_GENPLL_CAN_CLK - - lcpll0 crystal 0 BCM_CYGNUS_LCPLL0 - pcie_phy lcpll0 1 BCM_CYGNUS_LCPLL0_PCIE_PHY_REF_CLK - ddr_phy lcpll0 2 BCM_CYGNUS_LCPLL0_DDR_PHY_CLK - sdio lcpll0 3 BCM_CYGNUS_LCPLL0_SDIO_CLK - usb_phy lcpll0 4 BCM_CYGNUS_LCPLL0_USB_PHY_REF_CLK - smart_card lcpll0 5 BCM_CYGNUS_LCPLL0_SMART_CARD_CLK - ch5_unused lcpll0 6 BCM_CYGNUS_LCPLL0_CH5_UNUSED - - mipipll crystal 0 BCM_CYGNUS_MIPIPLL - ch0_unused mipipll 1 BCM_CYGNUS_MIPIPLL_CH0_UNUSED - ch1_lcd mipipll 2 BCM_CYGNUS_MIPIPLL_CH1_LCD - ch2_v3d mipipll 3 BCM_CYGNUS_MIPIPLL_CH2_V3D - ch3_unused mipipll 4 BCM_CYGNUS_MIPIPLL_CH3_UNUSED - ch4_unused mipipll 5 BCM_CYGNUS_MIPIPLL_CH4_UNUSED - ch5_unused mipipll 6 BCM_CYGNUS_MIPIPLL_CH5_UNUSED - - audiopll crystal 0 BCM_CYGNUS_AUDIOPLL - ch0_audio audiopll 1 BCM_CYGNUS_AUDIOPLL_CH0 - ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 - ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 - -Hurricane 2 ------- -PLL and leaf clock compatible strings for Hurricane 2 are: - "brcm,hr2-armpll" - -The following table defines the set of PLL/clock for Hurricane 2: - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - -Northstar and Northstar Plus ------- -PLL and leaf clock compatible strings for Northstar and Northstar Plus are: - "brcm,nsp-armpll" - "brcm,nsp-genpll" - "brcm,nsp-lcpll0" - -The following table defines the set of PLL/clock index and ID for Northstar and -Northstar Plus. These clock IDs are defined in: - "include/dt-bindings/clock/bcm-nsp.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - armpll crystal N/A N/A - - genpll crystal 0 BCM_NSP_GENPLL - phy genpll 1 BCM_NSP_GENPLL_PHY_CLK - ethernetclk genpll 2 BCM_NSP_GENPLL_ENET_SW_CLK - usbclk genpll 3 BCM_NSP_GENPLL_USB_PHY_REF_CLK - iprocfast genpll 4 BCM_NSP_GENPLL_IPROCFAST_CLK - sata1 genpll 5 BCM_NSP_GENPLL_SATA1_CLK - sata2 genpll 6 BCM_NSP_GENPLL_SATA2_CLK - - lcpll0 crystal 0 BCM_NSP_LCPLL0 - pcie_phy lcpll0 1 BCM_NSP_LCPLL0_PCIE_PHY_REF_CLK - sdio lcpll0 2 BCM_NSP_LCPLL0_SDIO_CLK - ddr_phy lcpll0 3 BCM_NSP_LCPLL0_DDR_PHY_CLK - -Northstar 2 ------------ -PLL and leaf clock compatible strings for Northstar 2 are: - "brcm,ns2-genpll-scr" - "brcm,ns2-genpll-sw" - "brcm,ns2-lcpll-ddr" - "brcm,ns2-lcpll-ports" - -The following table defines the set of PLL/clock index and ID for Northstar 2. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-ns2.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - - genpll_scr crystal 0 BCM_NS2_GENPLL_SCR - scr genpll_scr 1 BCM_NS2_GENPLL_SCR_SCR_CLK - fs genpll_scr 2 BCM_NS2_GENPLL_SCR_FS_CLK - audio_ref genpll_scr 3 BCM_NS2_GENPLL_SCR_AUDIO_CLK - ch3_unused genpll_scr 4 BCM_NS2_GENPLL_SCR_CH3_UNUSED - ch4_unused genpll_scr 5 BCM_NS2_GENPLL_SCR_CH4_UNUSED - ch5_unused genpll_scr 6 BCM_NS2_GENPLL_SCR_CH5_UNUSED - - genpll_sw crystal 0 BCM_NS2_GENPLL_SW - rpe genpll_sw 1 BCM_NS2_GENPLL_SW_RPE_CLK - 250 genpll_sw 2 BCM_NS2_GENPLL_SW_250_CLK - nic genpll_sw 3 BCM_NS2_GENPLL_SW_NIC_CLK - chimp genpll_sw 4 BCM_NS2_GENPLL_SW_CHIMP_CLK - port genpll_sw 5 BCM_NS2_GENPLL_SW_PORT_CLK - sdio genpll_sw 6 BCM_NS2_GENPLL_SW_SDIO_CLK - - lcpll_ddr crystal 0 BCM_NS2_LCPLL_DDR - pcie_sata_usb lcpll_ddr 1 BCM_NS2_LCPLL_DDR_PCIE_SATA_USB_CLK - ddr lcpll_ddr 2 BCM_NS2_LCPLL_DDR_DDR_CLK - ch2_unused lcpll_ddr 3 BCM_NS2_LCPLL_DDR_CH2_UNUSED - ch3_unused lcpll_ddr 4 BCM_NS2_LCPLL_DDR_CH3_UNUSED - ch4_unused lcpll_ddr 5 BCM_NS2_LCPLL_DDR_CH4_UNUSED - ch5_unused lcpll_ddr 6 BCM_NS2_LCPLL_DDR_CH5_UNUSED - - lcpll_ports crystal 0 BCM_NS2_LCPLL_PORTS - wan lcpll_ports 1 BCM_NS2_LCPLL_PORTS_WAN_CLK - rgmii lcpll_ports 2 BCM_NS2_LCPLL_PORTS_RGMII_CLK - ch2_unused lcpll_ports 3 BCM_NS2_LCPLL_PORTS_CH2_UNUSED - ch3_unused lcpll_ports 4 BCM_NS2_LCPLL_PORTS_CH3_UNUSED - ch4_unused lcpll_ports 5 BCM_NS2_LCPLL_PORTS_CH4_UNUSED - ch5_unused lcpll_ports 6 BCM_NS2_LCPLL_PORTS_CH5_UNUSED - -BCM63138 --------- -PLL and leaf clock compatible strings for BCM63138 are: - "brcm,bcm63138-armpll" - -Stingray ------------ -PLL and leaf clock compatible strings for Stingray are: - "brcm,sr-genpll0" - "brcm,sr-genpll1" - "brcm,sr-genpll2" - "brcm,sr-genpll3" - "brcm,sr-genpll4" - "brcm,sr-genpll5" - "brcm,sr-genpll6" - - "brcm,sr-lcpll0" - "brcm,sr-lcpll1" - "brcm,sr-lcpll-pcie" - - -The following table defines the set of PLL/clock index and ID for Stingray. -These clock IDs are defined in: - "include/dt-bindings/clock/bcm-sr.h" - - Clock Source Index ID - --- ----- ----- --------- - crystal N/A N/A N/A - crmu_ref25m crystal N/A N/A - - genpll0 crystal 0 BCM_SR_GENPLL0 - clk_125m genpll0 1 BCM_SR_GENPLL0_125M_CLK - clk_scr genpll0 2 BCM_SR_GENPLL0_SCR_CLK - clk_250 genpll0 3 BCM_SR_GENPLL0_250M_CLK - clk_pcie_axi genpll0 4 BCM_SR_GENPLL0_PCIE_AXI_CLK - clk_paxc_axi_x2 genpll0 5 BCM_SR_GENPLL0_PAXC_AXI_X2_CLK - clk_paxc_axi genpll0 6 BCM_SR_GENPLL0_PAXC_AXI_CLK - - genpll1 crystal 0 BCM_SR_GENPLL1 - clk_pcie_tl genpll1 1 BCM_SR_GENPLL1_PCIE_TL_CLK - clk_mhb_apb genpll1 2 BCM_SR_GENPLL1_MHB_APB_CLK - - genpll2 crystal 0 BCM_SR_GENPLL2 - clk_nic genpll2 1 BCM_SR_GENPLL2_NIC_CLK - clk_ts_500_ref genpll2 2 BCM_SR_GENPLL2_TS_500_REF_CLK - clk_125_nitro genpll2 3 BCM_SR_GENPLL2_125_NITRO_CLK - clk_chimp genpll2 4 BCM_SR_GENPLL2_CHIMP_CLK - clk_nic_flash genpll2 5 BCM_SR_GENPLL2_NIC_FLASH_CLK - clk_fs genpll2 6 BCM_SR_GENPLL2_FS_CLK - - genpll3 crystal 0 BCM_SR_GENPLL3 - clk_hsls genpll3 1 BCM_SR_GENPLL3_HSLS_CLK - clk_sdio genpll3 2 BCM_SR_GENPLL3_SDIO_CLK - - genpll4 crystal 0 BCM_SR_GENPLL4 - clk_ccn genpll4 1 BCM_SR_GENPLL4_CCN_CLK - clk_tpiu_pll genpll4 2 BCM_SR_GENPLL4_TPIU_PLL_CLK - clk_noc genpll4 3 BCM_SR_GENPLL4_NOC_CLK - clk_chclk_fs4 genpll4 4 BCM_SR_GENPLL4_CHCLK_FS4_CLK - clk_bridge_fscpu genpll4 5 BCM_SR_GENPLL4_BRIDGE_FSCPU_CLK - - genpll5 crystal 0 BCM_SR_GENPLL5 - clk_fs4_hf genpll5 1 BCM_SR_GENPLL5_FS4_HF_CLK - clk_crypto_ae genpll5 2 BCM_SR_GENPLL5_CRYPTO_AE_CLK - clk_raid_ae genpll5 3 BCM_SR_GENPLL5_RAID_AE_CLK - - genpll6 crystal 0 BCM_SR_GENPLL6 - clk_48_usb genpll6 1 BCM_SR_GENPLL6_48_USB_CLK - - lcpll0 crystal 0 BCM_SR_LCPLL0 - clk_sata_refp lcpll0 1 BCM_SR_LCPLL0_SATA_REFP_CLK - clk_sata_refn lcpll0 2 BCM_SR_LCPLL0_SATA_REFN_CLK - clk_sata_350 lcpll0 3 BCM_SR_LCPLL0_SATA_350_CLK - clk_sata_500 lcpll0 4 BCM_SR_LCPLL0_SATA_500_CLK - - lcpll1 crystal 0 BCM_SR_LCPLL1 - clk_wan lcpll1 1 BCM_SR_LCPLL1_WAN_CLK - clk_usb_ref lcpll1 2 BCM_SR_LCPLL1_USB_REF_CLK - clk_crmu_ts lcpll1 3 BCM_SR_LCPLL1_CRMU_TS_CLK - - lcpll_pcie crystal 0 BCM_SR_LCPLL_PCIE - clk_pcie_phy_ref lcpll1 1 BCM_SR_LCPLL_PCIE_PHY_REF_CLK |