1 files changed, 0 insertions, 93 deletions
diff --git a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt b/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
deleted file mode 100644
index 6a6cf5de08b0..000000000000
--- a/Documentation/devicetree/bindings/display/sunxi/sun6i-dsi.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-Allwinner A31 DSI Encoder
-=========================
-
-The DSI pipeline consists of two separate blocks: the DSI controller
-itself, and its associated D-PHY.
-
-DSI Encoder
------------
-
-The DSI Encoder generates the DSI signal from the TCON's.
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun6i-a31-mipi-dsi
-  - reg: base address and size of memory-mapped region
-  - interrupts: interrupt associated to this IP
-  - clocks: phandles to the clocks feeding the DSI encoder
-    * bus: the DSI interface clock
-    * mod: the DSI module clock
-  - clock-names: the clock names mentioned above
-  - phys: phandle to the D-PHY
-  - phy-names: must be "dphy"
-  - resets: phandle to the reset controller driving the encoder
-
-  - ports: A ports node with endpoint definitions as defined in
-    Documentation/devicetree/bindings/media/video-interfaces.txt. The
-    first port should be the input endpoint, usually coming from the
-    associated TCON.
-
-Any MIPI-DSI device attached to this should be described according to
-the bindings defined in ../mipi-dsi-bus.txt
-
-D-PHY
------
-
-Required properties:
-  - compatible: value must be one of:
-    * allwinner,sun6i-a31-mipi-dphy
-  - reg: base address and size of memory-mapped region
-  - clocks: phandles to the clocks feeding the DSI encoder
-    * bus: the DSI interface clock
-    * mod: the DSI module clock
-  - clock-names: the clock names mentioned above
-  - resets: phandle to the reset controller driving the encoder
-
-Example:
-
-dsi0: dsi@1ca0000 {
-	compatible = "allwinner,sun6i-a31-mipi-dsi";
-	reg = <0x01ca0000 0x1000>;
-	interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
-	clocks = <&ccu CLK_BUS_MIPI_DSI>,
-		 <&ccu CLK_DSI_SCLK>;
-	clock-names = "bus", "mod";
-	resets = <&ccu RST_BUS_MIPI_DSI>;
-	phys = <&dphy0>;
-	phy-names = "dphy";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	panel@0 {
-		compatible = "bananapi,lhr050h41", "ilitek,ili9881c";
-		reg = <0>;
-		power-gpios = <&pio 1 7 GPIO_ACTIVE_HIGH>; /* PB07 */
-		reset-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL05 */
-		backlight = <&pwm_bl>;
-	};
-
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			dsi0_in_tcon0: endpoint {
-				remote-endpoint = <&tcon0_out_dsi0>;
-			};
-		};
-	};
-};
-
-dphy0: d-phy@1ca1000 {
-	compatible = "allwinner,sun6i-a31-mipi-dphy";
-	reg = <0x01ca1000 0x1000>;
-	clocks = <&ccu CLK_BUS_MIPI_DSI>,
-		 <&ccu CLK_DSI_DPHY>;
-	clock-names = "bus", "mod";
-	resets = <&ccu RST_BUS_MIPI_DSI>;
-	#phy-cells = <0>;
-};