diff options
Diffstat (limited to 'Documentation/devicetree/bindings/dma/owl-dma.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/dma/owl-dma.txt | 47 |
1 files changed, 0 insertions, 47 deletions
diff --git a/Documentation/devicetree/bindings/dma/owl-dma.txt b/Documentation/devicetree/bindings/dma/owl-dma.txt deleted file mode 100644 index 03e9bb12b75f..000000000000 --- a/Documentation/devicetree/bindings/dma/owl-dma.txt +++ /dev/null @@ -1,47 +0,0 @@ -* Actions Semi Owl SoCs DMA controller - -This binding follows the generic DMA bindings defined in dma.txt. - -Required properties: -- compatible: Should be "actions,s900-dma". -- reg: Should contain DMA registers location and length. -- interrupts: Should contain 4 interrupts shared by all channel. -- #dma-cells: Must be <1>. Used to represent the number of integer - cells in the dmas property of client device. -- dma-channels: Physical channels supported. -- dma-requests: Number of DMA request signals supported by the controller. - Refer to Documentation/devicetree/bindings/dma/dma.txt -- clocks: Phandle and Specifier of the clock feeding the DMA controller. - -Example: - -Controller: - dma: dma-controller@e0260000 { - compatible = "actions,s900-dma"; - reg = <0x0 0xe0260000 0x0 0x1000>; - interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - #dma-cells = <1>; - dma-channels = <12>; - dma-requests = <46>; - clocks = <&clock CLK_DMAC>; - }; - -Client: - -DMA clients connected to the Actions Semi Owl SoCs DMA controller must -use the format described in the dma.txt file, using a two-cell specifier -for each channel. - -The two cells in order are: -1. A phandle pointing to the DMA controller. -2. The channel id. - -uart5: serial@e012a000 { - ... - dma-names = "tx", "rx"; - dmas = <&dma 26>, <&dma 27>; - ... -}; |