diff options
Diffstat (limited to 'Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt | 27 |
1 files changed, 0 insertions, 27 deletions
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt deleted file mode 100644 index 936fbdf12815..000000000000 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.txt +++ /dev/null @@ -1,27 +0,0 @@ -* PTN5150 CC (Configuration Channel) Logic device - -PTN5150 is a small thin low power CC logic chip supporting the USB Type-C -connector application with CC control logic detection and indication functions. -It is interfaced to the host controller using an I2C interface. - -Required properties: -- compatible: should be "nxp,ptn5150" -- reg: specifies the I2C slave address of the device -- int-gpio: should contain a phandle and GPIO specifier for the GPIO pin - connected to the PTN5150's INTB pin. -- vbus-gpio: should contain a phandle and GPIO specifier for the GPIO pin which - is used to control VBUS. -- pinctrl-names : a pinctrl state named "default" must be defined. -- pinctrl-0 : phandle referencing pin configuration of interrupt and vbus - control. - -Example: - ptn5150@1d { - compatible = "nxp,ptn5150"; - reg = <0x1d>; - int-gpio = <&msmgpio 78 GPIO_ACTIVE_HIGH>; - vbus-gpio = <&msmgpio 148 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&ptn5150_default>; - status = "okay"; - }; |