1 files changed, 0 insertions, 46 deletions
diff --git a/Documentation/devicetree/bindings/gnss/sirfstar.txt b/Documentation/devicetree/bindings/gnss/sirfstar.txt
deleted file mode 100644
index f4252b6b660b..000000000000
--- a/Documentation/devicetree/bindings/gnss/sirfstar.txt
+++ /dev/null
@@ -1,46 +0,0 @@
-SiRFstar-based GNSS Receiver DT binding
-
-SiRFstar chipsets are used in GNSS-receiver modules produced by several
-vendors and can use UART, SPI or I2C interfaces.
-
-Please see Documentation/devicetree/bindings/gnss/gnss.txt for generic
-properties.
-
-Required properties:
-
-- compatible	: Must be one of
-
-			"fastrax,uc430"
-			"linx,r4"
-			"wi2wi,w2sg0004"
-			"wi2wi,w2sg0008i"
-			"wi2wi,w2sg0084i"
-
-- vcc-supply	: Main voltage regulator (pin name: 3V3_IN, VCC, VDD)
-
-Required properties (I2C):
-- reg		: I2C slave address
-
-Required properties (SPI):
-- reg		: SPI chip select address
-
-Optional properties:
-
-- sirf,onoff-gpios	: GPIO used to power on and off device (pin name: ON_OFF)
-- sirf,wakeup-gpios	: GPIO used to determine device power state
-			  (pin name: RFPWRUP, WAKEUP)
-- timepulse-gpios	: Time pulse GPIO (pin name: 1PPS, TM)
-
-Example:
-
-serial@1234 {
-	compatible = "ns16550a";
-
-	gnss {
-		compatible = "wi2wi,w2sg0084i";
-
-		vcc-supply = <&gnss_reg>;
-		sirf,onoff-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
-		sirf,wakeup-gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
-	};
-};