1 files changed, 0 insertions, 58 deletions
diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt
deleted file mode 100644
index 7cccc49b6bea..000000000000
--- a/Documentation/devicetree/bindings/input/gpio-keys.txt
+++ /dev/null
@@ -1,58 +0,0 @@
-Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver
-
-Required properties:
-	- compatible = "gpio-keys";
-
-Optional properties:
-	- autorepeat: Boolean, Enable auto repeat feature of Linux input
-	  subsystem.
-	- label: String, name of the input device.
-
-Each button (key) is represented as a sub-node of "gpio-keys":
-Subnode properties:
-
-	- gpios: OF device-tree gpio specification.
-	- interrupts: the interrupt line for that input.
-	- label: Descriptive name of the key.
-	- linux,code: Keycode to emit.
-
-Note that either "interrupts" or "gpios" properties can be omitted, but not
-both at the same time. Specifying both properties is allowed.
-
-Optional subnode-properties:
-	- linux,input-type: Specify event type this button/key generates.
-	  If not specified defaults to <1> == EV_KEY.
-	- debounce-interval: Debouncing interval time in milliseconds.
-	  If not specified defaults to 5.
-	- wakeup-source: Boolean, button can wake-up the system.
-			 (Legacy property supported: "gpio-key,wakeup")
-	- wakeup-event-action: Specifies whether the key should wake the
-	  system when asserted, when deasserted, or both. This property is
-	  only valid for keys that wake up the system (e.g., when the
-	  "wakeup-source" property is also provided).
-	  Supported values are defined in linux-event-codes.h:
-		EV_ACT_ASSERTED		- asserted
-		EV_ACT_DEASSERTED	- deasserted
-		EV_ACT_ANY		- both asserted and deasserted
-	- linux,can-disable: Boolean, indicates that button is connected
-	  to dedicated (not shared) interrupt which can be disabled to
-	  suppress events from the button.
-
-Example nodes:
-
-	gpio-keys {
-			compatible = "gpio-keys";
-			autorepeat;
-
-			up {
-				label = "GPIO Key UP";
-				linux,code = <103>;
-				gpios = <&gpio1 0 1>;
-			};
-
-			down {
-				label = "GPIO Key DOWN";
-				linux,code = <108>;
-				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-			};
-			...