diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input/ti,drv260x.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/input/ti,drv260x.txt | 50 |
1 files changed, 0 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/input/ti,drv260x.txt b/Documentation/devicetree/bindings/input/ti,drv260x.txt deleted file mode 100644 index 4c5312eaaa85..000000000000 --- a/Documentation/devicetree/bindings/input/ti,drv260x.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Texas Instruments - drv260x Haptics driver family - -Required properties: - - compatible - One of: - "ti,drv2604" - DRV2604 - "ti,drv2605" - DRV2605 - "ti,drv2605l" - DRV2605L - - reg - I2C slave address - - vbat-supply - Required supply regulator - - mode - Power up mode of the chip (defined in include/dt-bindings/input/ti-drv260x.h) - DRV260X_LRA_MODE - Linear Resonance Actuator mode (Piezoelectric) - DRV260X_LRA_NO_CAL_MODE - This is a LRA Mode but there is no calibration - sequence during init. And the device is configured for real - time playback mode (RTP mode). - DRV260X_ERM_MODE - Eccentric Rotating Mass mode (Rotary vibrator) - - library-sel - These are ROM based waveforms pre-programmed into the IC. - This should be set to set the library to use at power up. - (defined in include/dt-bindings/input/ti-drv260x.h) - DRV260X_LIB_EMPTY - Do not use a pre-programmed library - DRV260X_ERM_LIB_A - Pre-programmed Library - DRV260X_ERM_LIB_B - Pre-programmed Library - DRV260X_ERM_LIB_C - Pre-programmed Library - DRV260X_ERM_LIB_D - Pre-programmed Library - DRV260X_ERM_LIB_E - Pre-programmed Library - DRV260X_ERM_LIB_F - Pre-programmed Library - DRV260X_LIB_LRA - Pre-programmed LRA Library - -Optional properties: - - enable-gpio - gpio pin to enable/disable the device. - - vib-rated-mv - The rated voltage of the actuator in millivolts. - If this is not set then the value will be defaulted to - 3.2 v. - - vib-overdrive-mv - The overdrive voltage of the actuator in millivolts. - If this is not set then the value will be defaulted to - 3.2 v. -Example: - -haptics: haptics@5a { - compatible = "ti,drv2605l"; - reg = <0x5a>; - vbat-supply = <&vbat>; - enable-gpio = <&gpio1 28 GPIO_ACTIVE_HIGH>; - mode = <DRV260X_LRA_MODE>; - library-sel = <DRV260X_LIB_LRA>; - vib-rated-mv = <3200>; - vib-overdrive-mv = <3200>; -} - -For more product information please see the link below: -http://www.ti.com/product/drv2605 |