diff options
Diffstat (limited to 'Documentation/devicetree/bindings/input')
8 files changed, 174 insertions, 135 deletions
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml index 5b3b71c9c018..cffd02028d02 100644 --- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml +++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml @@ -16,8 +16,8 @@ properties: - const: allwinner,sun4i-a10-lradc-keys - const: allwinner,sun8i-a83t-r-lradc - items: - - const: allwinner,sun50i-a64-lradc - - const: allwinner,sun8i-a83t-r-lradc + - const: allwinner,sun50i-a64-lradc + - const: allwinner,sun8i-a83t-r-lradc reg: maxItems: 1 @@ -42,9 +42,8 @@ patternProperties: description: Keycode to emit channel: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 1] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] description: ADC Channel this key is attached to voltage: diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt deleted file mode 100644 index 4d9a3717eaaf..000000000000 --- a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt +++ /dev/null @@ -1,45 +0,0 @@ -Device-Tree bindings for input/gpio_keys_polled.c keyboard driver - -Required properties: - - compatible = "gpio-keys-polled"; - - poll-interval: Poll interval time in milliseconds - -Optional properties: - - autorepeat: Boolean, Enable auto repeat feature of Linux input - subsystem. - -Each button (key) is represented as a sub-node of "gpio-keys-polled": -Subnode properties: - - - gpios: OF device-tree gpio specification. - - label: Descriptive name of the key. - - linux,code: Key / Axis code to emit. - -Optional subnode-properties: - - linux,input-type: Specify event type this button/key generates. - If not specified defaults to <1> == EV_KEY. - - linux,input-value: If linux,input-type is EV_ABS or EV_REL then this - value is sent for events this button generates when pressed. - EV_ABS/EV_REL axis will generate an event with a value of 0 when - all buttons with linux,input-type == type and linux,code == axis - are released. This value is interpreted as a signed 32 bit value, - e.g. to make a button generate a value of -1 use: - linux,input-value = <0xffffffff>; /* -1 */ - - debounce-interval: Debouncing interval time in milliseconds. - If not specified defaults to 5. - - wakeup-source: Boolean, button can wake-up the system. - (Legacy property supported: "gpio-key,wakeup") - -Example nodes: - - gpio_keys_polled { - compatible = "gpio-keys-polled"; - poll-interval = <100>; - autorepeat; - - button21 { - label = "GPIO Key UP"; - linux,code = <103>; - gpios = <&gpio1 0 1>; - }; - ... diff --git a/Documentation/devicetree/bindings/input/gpio-keys.txt b/Documentation/devicetree/bindings/input/gpio-keys.txt deleted file mode 100644 index 7cccc49b6bea..000000000000 --- a/Documentation/devicetree/bindings/input/gpio-keys.txt +++ /dev/null @@ -1,58 +0,0 @@ -Device-Tree bindings for input/keyboard/gpio_keys.c keyboard driver - -Required properties: - - compatible = "gpio-keys"; - -Optional properties: - - autorepeat: Boolean, Enable auto repeat feature of Linux input - subsystem. - - label: String, name of the input device. - -Each button (key) is represented as a sub-node of "gpio-keys": -Subnode properties: - - - gpios: OF device-tree gpio specification. - - interrupts: the interrupt line for that input. - - label: Descriptive name of the key. - - linux,code: Keycode to emit. - -Note that either "interrupts" or "gpios" properties can be omitted, but not -both at the same time. Specifying both properties is allowed. - -Optional subnode-properties: - - linux,input-type: Specify event type this button/key generates. - If not specified defaults to <1> == EV_KEY. - - debounce-interval: Debouncing interval time in milliseconds. - If not specified defaults to 5. - - wakeup-source: Boolean, button can wake-up the system. - (Legacy property supported: "gpio-key,wakeup") - - wakeup-event-action: Specifies whether the key should wake the - system when asserted, when deasserted, or both. This property is - only valid for keys that wake up the system (e.g., when the - "wakeup-source" property is also provided). - Supported values are defined in linux-event-codes.h: - EV_ACT_ASSERTED - asserted - EV_ACT_DEASSERTED - deasserted - EV_ACT_ANY - both asserted and deasserted - - linux,can-disable: Boolean, indicates that button is connected - to dedicated (not shared) interrupt which can be disabled to - suppress events from the button. - -Example nodes: - - gpio-keys { - compatible = "gpio-keys"; - autorepeat; - - up { - label = "GPIO Key UP"; - linux,code = <103>; - gpios = <&gpio1 0 1>; - }; - - down { - label = "GPIO Key DOWN"; - linux,code = <108>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - }; - ... diff --git a/Documentation/devicetree/bindings/input/gpio-keys.yaml b/Documentation/devicetree/bindings/input/gpio-keys.yaml new file mode 100644 index 000000000000..6966ab009fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-keys.yaml @@ -0,0 +1,149 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/gpio-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Device-Tree bindings for GPIO attached keys + +maintainers: + - Rob Herring <robh@kernel.org> + +properties: + compatible: + enum: + - gpio-keys + - gpio-keys-polled + +patternProperties: + ".*": + if: + type: object + then: + $ref: input.yaml# + + properties: + gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + label: + description: Descriptive name of the key. + + linux,code: + description: Key / Axis code to emit. + $ref: /schemas/types.yaml#definitions/uint32 + + linux,input-type: + description: + Specify event type this button/key generates. If not specified defaults to + <1> == EV_KEY. + $ref: /schemas/types.yaml#definitions/uint32 + + default: 1 + + linux,input-value: + description: | + If linux,input-type is EV_ABS or EV_REL then this + value is sent for events this button generates when pressed. + EV_ABS/EV_REL axis will generate an event with a value of 0 + when all buttons with linux,input-type == type and + linux,code == axis are released. This value is interpreted + as a signed 32 bit value, e.g. to make a button generate a + value of -1 use: + + linux,input-value = <0xffffffff>; /* -1 */ + + $ref: /schemas/types.yaml#definitions/uint32 + + debounce-interval: + description: + Debouncing interval time in milliseconds. If not specified defaults to 5. + $ref: /schemas/types.yaml#definitions/uint32 + + default: 5 + + wakeup-source: + description: Button can wake-up the system. + + wakeup-event-action: + description: | + Specifies whether the key should wake the system when asserted, when + deasserted, or both. This property is only valid for keys that wake up the + system (e.g., when the "wakeup-source" property is also provided). + + Supported values are defined in linux-event-codes.h: + + EV_ACT_ANY - both asserted and deasserted + EV_ACT_ASSERTED - asserted + EV_ACT_DEASSERTED - deasserted + $ref: /schemas/types.yaml#definitions/uint32 + enum: [0, 1, 2] + + linux,can-disable: + description: + Indicates that button is connected to dedicated (not shared) interrupt + which can be disabled to suppress events from the button. + type: boolean + + pinctrl-0: + maxItems: 1 + + pinctrl-names: + maxItems: 1 + + required: + - linux,code + + anyOf: + - required: + - interrupts + - required: + - gpios + + dependencies: + wakeup-event-action: [ wakeup-source ] + linux,input-value: [ gpios ] + + unevaluatedProperties: false + +if: + properties: + compatible: + const: gpio-keys-polled +then: + properties: + poll-interval: + description: + Poll interval time in milliseconds + $ref: /schemas/types.yaml#definitions/uint32 + + required: + - poll-interval + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + up { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio1 0 1>; + }; + + down { + label = "GPIO Key DOWN"; + linux,code = <108>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/input.yaml b/Documentation/devicetree/bindings/input/input.yaml index 6d519046b3af..8edcb3c31270 100644 --- a/Documentation/devicetree/bindings/input/input.yaml +++ b/Documentation/devicetree/bindings/input/input.yaml @@ -18,11 +18,10 @@ properties: description: Specifies an array of numeric keycode values to be used for reporting button presses. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - items: - minimum: 0 - maximum: 0xff + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + minimum: 0 + maximum: 0xff poll-interval: description: Poll interval time in milliseconds. diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml index 5625c222903a..77fe3b545b35 100644 --- a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml +++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml @@ -30,10 +30,9 @@ properties: - azoteq,iqs625-keys linux,keycodes: - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - - minItems: 1 - maxItems: 16 + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 16 description: | Specifies the numeric keycodes associated with each available touch or proximity event according to the following table. An 'x' indicates the diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml index 383d64a91854..024b262a2ef7 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.yaml @@ -42,7 +42,7 @@ properties: - focaltech,ft6236 reg: - const: 0x38 + maxItems: 1 interrupts: maxItems: 1 @@ -61,33 +61,29 @@ properties: gain: description: Allows setting the sensitivity in the range from 0 to 31. Note that lower values indicate higher sensitivity. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 offset: description: Allows setting the edge compensation in the range from 0 to 31. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 31 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 31 offset-x: description: Same as offset, but applies only to the horizontal position. Range from 0 to 80, only supported by evervision,ev-ft5726 devices. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 80 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 offset-y: description: Same as offset, but applies only to the vertical position. Range from 0 to 80, only supported by evervision,ev-ft5726 devices. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - - maximum: 80 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 80 touchscreen-size-x: true touchscreen-size-y: true diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml index c8ea9434c9cc..e81cfa56f25a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml @@ -63,7 +63,7 @@ required: - interrupts examples: -- | + - | i2c { #address-cells = <1>; #size-cells = <0>; |