1 files changed, 0 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/net/ti-bluetooth.txt b/Documentation/devicetree/bindings/net/ti-bluetooth.txt
deleted file mode 100644
index f48c17b38f58..000000000000
--- a/Documentation/devicetree/bindings/net/ti-bluetooth.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Texas Instruments Bluetooth Chips
----------------------------------
-
-This documents the binding structure and common properties for serial
-attached TI Bluetooth devices. The following chips are included in this
-binding:
-
-* TI CC256x Bluetooth devices
-* TI WiLink 7/8 (wl12xx/wl18xx) Shared Transport BT/FM/GPS devices
-
-TI WiLink devices have a UART interface for providing Bluetooth, FM radio,
-and GPS over what's called "shared transport". The shared transport is
-standard BT HCI protocol with additional channels for the other functions.
-
-TI WiLink devices also have a separate WiFi interface as described in
-wireless/ti,wlcore.txt.
-
-This bindings follows the UART slave device binding in ../serial/serial.yaml.
-
-Required properties:
- - compatible: should be one of the following:
-    "ti,cc2560"
-    "ti,wl1271-st"
-    "ti,wl1273-st"
-    "ti,wl1281-st"
-    "ti,wl1283-st"
-    "ti,wl1285-st"
-    "ti,wl1801-st"
-    "ti,wl1805-st"
-    "ti,wl1807-st"
-    "ti,wl1831-st"
-    "ti,wl1835-st"
-    "ti,wl1837-st"
-
-Optional properties:
- - enable-gpios : GPIO signal controlling enabling of BT. Active high.
- - vio-supply : Vio input supply (1.8V)
- - vbat-supply : Vbat input supply (2.9-4.8V)
- - clocks : Must contain an entry, for each entry in clock-names.
-   See ../clocks/clock-bindings.txt for details.
- - clock-names : Must include the following entry:
-   "ext_clock" (External clock provided to the TI combo chip).
- - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address
-   with the most significant byte first (big-endian).
- - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified)
-
-Example:
-
-&serial0 {
-	compatible = "ns16550a";
-	...
-	bluetooth {
-		compatible = "ti,wl1835-st";
-		enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
-		clocks = <&clk32k_wl18xx>;
-		clock-names = "ext_clock";
-		nvmem-cells = <&bd_address>;
-		nvmem-cell-names = "bd-address";
-	};
-};