diff options
Diffstat (limited to '')
22 files changed, 438 insertions, 73 deletions
diff --git a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml index 37a65badb448..0a2d7baf5db3 100644 --- a/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml +++ b/Documentation/devicetree/bindings/net/bluetooth/nxp,88w8987-bt.yaml @@ -34,6 +34,12 @@ properties: firmware-name: maxItems: 1 + device-wakeup-gpios: + maxItems: 1 + description: + Host-To-Chip power save mechanism is driven by this GPIO + connected to BT_WAKE_IN pin of the NXP chipset. + required: - compatible @@ -41,10 +47,12 @@ additionalProperties: false examples: - | + #include <dt-bindings/gpio/gpio.h> serial { bluetooth { compatible = "nxp,88w8987-bt"; fw-init-baudrate = <3000000>; firmware-name = "uartuart8987_bt_v0.bin"; + device-wakeup-gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; }; }; diff --git a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml index 30c0c3e6f37a..62ca63e8a26f 100644 --- a/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml +++ b/Documentation/devicetree/bindings/net/dsa/microchip,ksz.yaml @@ -34,6 +34,7 @@ properties: - microchip,ksz9563 - microchip,ksz8563 - microchip,ksz8567 + - microchip,lan9646 reset-gpios: description: @@ -81,6 +82,26 @@ properties: interrupts: maxItems: 1 + mdio: + $ref: /schemas/net/mdio.yaml# + unevaluatedProperties: false + properties: + mdio-parent-bus: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle pointing to the MDIO bus controller connected to the + secondary MDIO interface. This property should be used when + the internal MDIO bus is accessed via a secondary MDIO + interface rather than the primary management interface. + + patternProperties: + "^ethernet-phy@[0-9a-f]$": + type: object + $ref: /schemas/net/ethernet-phy.yaml# + unevaluatedProperties: false + description: + Integrated PHY node + required: - compatible - reg @@ -138,7 +159,6 @@ examples: pinctrl-0 = <&pinctrl_spi_ksz>; cs-gpios = <&pioC 25 0>; - id = <1>; ksz9477: switch@0 { compatible = "microchip,ksz9477"; diff --git a/Documentation/devicetree/bindings/net/dsa/realtek.yaml b/Documentation/devicetree/bindings/net/dsa/realtek.yaml index 70b6bda3cf98..f348e66fb515 100644 --- a/Documentation/devicetree/bindings/net/dsa/realtek.yaml +++ b/Documentation/devicetree/bindings/net/dsa/realtek.yaml @@ -147,7 +147,7 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> platform { - switch { + ethernet-switch { compatible = "realtek,rtl8366rb"; /* 22 = MDIO (has input reads), 21 = MDC (clock, output only) */ mdc-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; @@ -163,35 +163,35 @@ examples: #interrupt-cells = <1>; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan0"; phy-handle = <&phy0>; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan1"; phy-handle = <&phy1>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; phy-handle = <&phy2>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan3"; phy-handle = <&phy3>; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "wan"; phy-handle = <&phy4>; }; - port@5 { + ethernet-port@5 { reg = <5>; ethernet = <&gmac0>; phy-mode = "rgmii"; @@ -241,7 +241,7 @@ examples: #include <dt-bindings/interrupt-controller/irq.h> platform { - switch { + ethernet-switch { compatible = "realtek,rtl8365mb"; mdc-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; mdio-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; @@ -255,30 +255,30 @@ examples: #interrupt-cells = <1>; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "swp0"; phy-handle = <ðphy0>; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "swp1"; phy-handle = <ðphy1>; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "swp2"; phy-handle = <ðphy2>; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "swp3"; phy-handle = <ðphy3>; }; - port@6 { + ethernet-port@6 { reg = <6>; ethernet = <&fec1>; phy-mode = "rgmii"; @@ -330,7 +330,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - switch@29 { + ethernet-switch@29 { compatible = "realtek,rtl8365mb"; reg = <29>; @@ -344,36 +344,36 @@ examples: #interrupt-cells = <1>; }; - ports { + ethernet-ports { #address-cells = <1>; #size-cells = <0>; - port@0 { + ethernet-port@0 { reg = <0>; label = "lan4"; }; - port@1 { + ethernet-port@1 { reg = <1>; label = "lan3"; }; - port@2 { + ethernet-port@2 { reg = <2>; label = "lan2"; }; - port@3 { + ethernet-port@3 { reg = <3>; label = "lan1"; }; - port@4 { + ethernet-port@4 { reg = <4>; label = "wan"; }; - port@7 { + ethernet-port@7 { reg = <7>; ethernet = <ðernet>; phy-mode = "rgmii"; diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml index d9b62741a225..2c71454ae8e3 100644 --- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml +++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml @@ -158,6 +158,27 @@ properties: Mark the corresponding energy efficient ethernet mode as broken and request the ethernet to stop advertising it. + timing-role: + $ref: /schemas/types.yaml#/definitions/string + enum: + - forced-master + - forced-slave + - preferred-master + - preferred-slave + description: | + Specifies the timing role of the PHY in the network link. This property is + required for setups where the role must be explicitly assigned via the + device tree due to limitations in hardware strapping or incorrect strap + configurations. + It is applicable to Single Pair Ethernet (1000/100/10Base-T1) and other + PHY types, including 1000Base-T, where it controls whether the PHY should + be a master (clock source) or a slave (clock receiver). + + - 'forced-master': The PHY is forced to operate as a master. + - 'forced-slave': The PHY is forced to operate as a slave. + - 'preferred-master': Prefer the PHY to be master but allow negotiation. + - 'preferred-slave': Prefer the PHY to be slave but allow negotiation. + pses: $ref: /schemas/types.yaml#/definitions/phandle-array maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml index c1dd6aa04321..71c43ece8295 100644 --- a/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml +++ b/Documentation/devicetree/bindings/net/fsl,enetc-mdio.yaml @@ -20,10 +20,13 @@ maintainers: properties: compatible: - items: - - enum: - - pci1957,ee01 - - const: fsl,enetc-mdio + oneOf: + - items: + - enum: + - pci1957,ee01 + - const: fsl,enetc-mdio + - items: + - const: pci1131,ee00 reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/fsl,enetc.yaml b/Documentation/devicetree/bindings/net/fsl,enetc.yaml index e152c93998fe..ca70f0050171 100644 --- a/Documentation/devicetree/bindings/net/fsl,enetc.yaml +++ b/Documentation/devicetree/bindings/net/fsl,enetc.yaml @@ -20,14 +20,25 @@ maintainers: properties: compatible: - items: + oneOf: + - items: + - enum: + - pci1957,e100 + - const: fsl,enetc - enum: - - pci1957,e100 - - const: fsl,enetc + - pci1131,e101 reg: maxItems: 1 + clocks: + items: + - description: MAC transmit/receive reference clock + + clock-names: + items: + - const: ref + mdio: $ref: mdio.yaml unevaluatedProperties: false @@ -40,6 +51,17 @@ required: allOf: - $ref: /schemas/pci/pci-device.yaml - $ref: ethernet-controller.yaml + - if: + not: + properties: + compatible: + contains: + enum: + - pci1131,e101 + then: + properties: + clocks: false + clock-names: false unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/fsl,fec.yaml b/Documentation/devicetree/bindings/net/fsl,fec.yaml index 5536c06139ca..24e863fdbdab 100644 --- a/Documentation/devicetree/bindings/net/fsl,fec.yaml +++ b/Documentation/devicetree/bindings/net/fsl,fec.yaml @@ -183,6 +183,13 @@ properties: description: Register bits of stop mode control, the format is <&gpr req_gpr req_bit>. + fsl,pps-channel: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 + description: + Specifies to which timer instance the PPS signal is routed. + enum: [0, 1, 2, 3] + mdio: $ref: mdio.yaml# unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml index 9854fab4c4db..f269615126d8 100644 --- a/Documentation/devicetree/bindings/net/marvell,aquantia.yaml +++ b/Documentation/devicetree/bindings/net/marvell,aquantia.yaml @@ -48,6 +48,12 @@ properties: firmware-name: description: specify the name of PHY firmware to load + marvell,mdi-cfg-order: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + force normal (0) or reverse (1) order of MDI pairs, overriding MDI_CFG bootstrap pin. + nvmem-cells: description: phandle to the firmware nvmem cell maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml index 71c25c4580ea..cc674b21588c 100644 --- a/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml +++ b/Documentation/devicetree/bindings/net/mdio-mux-gpio.yaml @@ -53,37 +53,21 @@ examples: ethernet-phy@1 { reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; interrupt-parent = <&gpio>; interrupts = <10 8>; /* Pin 10, active low */ }; ethernet-phy@2 { reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; interrupt-parent = <&gpio>; interrupts = <10 8>; /* Pin 10, active low */ }; ethernet-phy@3 { reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; interrupt-parent = <&gpio>; interrupts = <10 8>; /* Pin 10, active low */ }; ethernet-phy@4 { reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; interrupt-parent = <&gpio>; interrupts = <10 8>; /* Pin 10, active low */ }; @@ -96,37 +80,21 @@ examples: ethernet-phy@1 { reg = <1>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; interrupt-parent = <&gpio>; interrupts = <12 8>; /* Pin 12, active low */ }; ethernet-phy@2 { reg = <2>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; interrupt-parent = <&gpio>; interrupts = <12 8>; /* Pin 12, active low */ }; ethernet-phy@3 { reg = <3>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; interrupt-parent = <&gpio>; interrupts = <12 8>; /* Pin 12, active low */ }; ethernet-phy@4 { reg = <4>; - marvell,reg-init = <3 0x10 0 0x5777>, - <3 0x11 0 0x00aa>, - <3 0x12 0 0x4105>, - <3 0x13 0 0x0a60>; interrupt-parent = <&gpio>; interrupts = <12 8>; /* Pin 12, active low */ }; diff --git a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml index fcafef8d5a33..dedfad526666 100644 --- a/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml +++ b/Documentation/devicetree/bindings/net/microchip,sparx5-switch.yaml @@ -9,6 +9,7 @@ title: Microchip Sparx5 Ethernet switch controller maintainers: - Steen Hegelund <steen.hegelund@microchip.com> - Lars Povlsen <lars.povlsen@microchip.com> + - Daniel Machon <daniel.machon@microchip.com> description: | The SparX-5 Enterprise Ethernet switch family provides a rich set of @@ -34,7 +35,24 @@ properties: pattern: "^switch@[0-9a-f]+$" compatible: - const: microchip,sparx5-switch + oneOf: + - enum: + - microchip,lan9691-switch + - microchip,sparx5-switch + - items: + - enum: + - microchip,lan969c-switch + - microchip,lan969b-switch + - microchip,lan969a-switch + - microchip,lan9699-switch + - microchip,lan9698-switch + - microchip,lan9697-switch + - microchip,lan9696-switch + - microchip,lan9695-switch + - microchip,lan9694-switch + - microchip,lan9693-switch + - microchip,lan9692-switch + - const: microchip,lan9691-switch reg: items: diff --git a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml index 6924aff0b2c5..364b36151180 100644 --- a/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml +++ b/Documentation/devicetree/bindings/net/nfc/nxp,nci.yaml @@ -17,6 +17,7 @@ properties: - enum: - nxp,nq310 - nxp,pn547 + - nxp,pn553 - const: nxp,nxp-nci-i2c enable-gpios: diff --git a/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml new file mode 100644 index 000000000000..97389fd5dbbf --- /dev/null +++ b/Documentation/devicetree/bindings/net/nxp,netc-blk-ctrl.yaml @@ -0,0 +1,104 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/nxp,netc-blk-ctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NETC Blocks Control + +description: + Usually, NETC has 2 blocks of 64KB registers, integrated endpoint register + block (IERB) and privileged register block (PRB). IERB is used for pre-boot + initialization for all NETC devices, such as ENETC, Timer, EMIDO and so on. + And PRB controls global reset and global error handling for NETC. Moreover, + for the i.MX platform, there is also a NETCMIX block for link configuration, + such as MII protocol, PCS protocol, etc. + +maintainers: + - Wei Fang <wei.fang@nxp.com> + - Clark Wang <xiaoning.wang@nxp.com> + +properties: + compatible: + enum: + - nxp,imx95-netc-blk-ctrl + + reg: + maxItems: 3 + + reg-names: + items: + - const: ierb + - const: prb + - const: netcmix + + "#address-cells": + const: 2 + + "#size-cells": + const: 2 + + ranges: true + + clocks: + maxItems: 1 + + clock-names: + items: + - const: ipg + + power-domains: + maxItems: 1 + +patternProperties: + "^pcie@[0-9a-f]+$": + $ref: /schemas/pci/host-generic-pci.yaml# + +required: + - compatible + - reg + - reg-names + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + + system-controller@4cde0000 { + compatible = "nxp,imx95-netc-blk-ctrl"; + reg = <0x0 0x4cde0000 0x0 0x10000>, + <0x0 0x4cdf0000 0x0 0x10000>, + <0x0 0x4c81000c 0x0 0x18>; + reg-names = "ierb", "prb", "netcmix"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&scmi_clk 98>; + clock-names = "ipg"; + power-domains = <&scmi_devpd 18>; + + pcie@4cb00000 { + compatible = "pci-host-ecam-generic"; + reg = <0x0 0x4cb00000 0x0 0x100000>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0x1 0x1>; + ranges = <0x82000000 0x0 0x4cce0000 0x0 0x4cce0000 0x0 0x20000 + 0xc2000000 0x0 0x4cd10000 0x0 0x4cd10000 0x0 0x10000>; + + mdio@0,0 { + compatible = "pci1131,ee00"; + reg = <0x010000 0 0 0 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml index a754a61adc2d..5f9f7efff538 100644 --- a/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml +++ b/Documentation/devicetree/bindings/net/nxp,tja11xx.yaml @@ -62,6 +62,22 @@ allOf: reference clock output when RMII mode enabled. Only supported on TJA1100 and TJA1101. + - if: + properties: + compatible: + contains: + enum: + - ethernet-phy-id001b.b010 + - ethernet-phy-id001b.b013 + - ethernet-phy-id001b.b030 + - ethernet-phy-id001b.b031 + + then: + properties: + nxp,rmii-refclk-out: + type: boolean + description: Enable 50MHz RMII reference clock output on REF_CLK pin. + patternProperties: "^ethernet-phy@[0-9a-f]+$": type: object diff --git a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml index 6672327358bc..0bcd593a7bd0 100644 --- a/Documentation/devicetree/bindings/net/qcom,ethqos.yaml +++ b/Documentation/devicetree/bindings/net/qcom,ethqos.yaml @@ -18,11 +18,20 @@ allOf: properties: compatible: - enum: - - qcom,qcs404-ethqos - - qcom,sa8775p-ethqos - - qcom,sc8280xp-ethqos - - qcom,sm8150-ethqos + oneOf: + - items: + - enum: + - qcom,qcs8300-ethqos + - const: qcom,sa8775p-ethqos + - items: + - enum: + - qcom,qcs615-ethqos + - const: qcom,sm8150-ethqos + - enum: + - qcom,qcs404-ethqos + - qcom,sa8775p-ethqos + - qcom,sc8280xp-ethqos + - qcom,sm8150-ethqos reg: maxItems: 2 diff --git a/Documentation/devicetree/bindings/net/renesas,ether.yaml b/Documentation/devicetree/bindings/net/renesas,ether.yaml index 29355ab98569..f0a52f47f95a 100644 --- a/Documentation/devicetree/bindings/net/renesas,ether.yaml +++ b/Documentation/devicetree/bindings/net/renesas,ether.yaml @@ -59,6 +59,9 @@ properties: clocks: maxItems: 1 + iommus: + maxItems: 1 + power-domains: maxItems: 1 @@ -123,7 +126,6 @@ examples: reg = <1>; interrupt-parent = <&irqc0>; interrupts = <0 IRQ_TYPE_LEVEL_LOW>; - micrel,led-mode = <1>; reset-gpios = <&gpio5 31 GPIO_ACTIVE_LOW>; }; }; diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml index 90611b598d2b..15616ad737f5 100644 --- a/Documentation/devicetree/bindings/net/sff,sfp.yaml +++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml @@ -132,7 +132,7 @@ examples: pinctrl-names = "default"; pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>; reg = <0>; - interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; sfp = <&sfp2>; }; }; diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml index 4e2ba1bf788c..eb1f3ae41ab9 100644 --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml @@ -26,6 +26,7 @@ select: - snps,dwmac-3.610 - snps,dwmac-3.70a - snps,dwmac-3.710 + - snps,dwmac-3.72a - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwmac-4.20a @@ -90,6 +91,7 @@ properties: - snps,dwmac-3.610 - snps,dwmac-3.70a - snps,dwmac-3.710 + - snps,dwmac-3.72a - snps,dwmac-4.00 - snps,dwmac-4.10a - snps,dwmac-4.20a @@ -99,6 +101,7 @@ properties: - snps,dwxgmac-2.10 - starfive,jh7100-dwmac - starfive,jh7110-dwmac + - thead,th1520-gmac reg: minItems: 1 @@ -560,7 +563,7 @@ properties: max read outstanding req. limit snps,kbbe: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/flag description: do not cross 1KiB boundary. diff --git a/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml new file mode 100644 index 000000000000..6d9de3303762 --- /dev/null +++ b/Documentation/devicetree/bindings/net/thead,th1520-gmac.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/thead,th1520-gmac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: T-HEAD TH1520 GMAC Ethernet controller + +maintainers: + - Drew Fustini <dfustini@tenstorrent.com> + +description: | + The TH1520 GMAC is described in the TH1520 Peripheral Interface User Manual + https://git.beagleboard.org/beaglev-ahead/beaglev-ahead/-/tree/main/docs + + Features include + - Compliant with IEEE802.3 Specification + - IEEE 1588-2008 standard for precision networked clock synchronization + - Supports 10/100/1000Mbps data transfer rate + - Supports RGMII/MII interface + - Preamble and start of frame data (SFD) insertion in Transmit path + - Preamble and SFD deletion in the Receive path + - Automatic CRC and pad generation options for receive frames + - MDIO master interface for PHY device configuration and management + + The GMAC Registers consists of two parts + - APB registers are used to configure clock frequency/clock enable/clock + direction/PHY interface type. + - AHB registers are use to configure GMAC core (DesignWare Core part). + GMAC core register consists of DMA registers and GMAC registers. + +select: + properties: + compatible: + contains: + enum: + - thead,th1520-gmac + required: + - compatible + +allOf: + - $ref: snps,dwmac.yaml# + +properties: + compatible: + items: + - enum: + - thead,th1520-gmac + - const: snps,dwmac-3.70a + + reg: + items: + - description: DesignWare GMAC IP core registers + - description: GMAC APB registers + + reg-names: + items: + - const: dwmac + - const: apb + + clocks: + items: + - description: GMAC main clock + - description: Peripheral registers interface clock + + clock-names: + items: + - const: stmmaceth + - const: pclk + + interrupts: + items: + - description: Combined signal for various interrupt events + + interrupt-names: + items: + - const: macirq + +required: + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + gmac0: ethernet@e7070000 { + compatible = "thead,th1520-gmac", "snps,dwmac-3.70a"; + reg = <0xe7070000 0x2000>, <0xec003000 0x1000>; + reg-names = "dwmac", "apb"; + clocks = <&clk 1>, <&clk 2>; + clock-names = "stmmaceth", "pclk"; + interrupts = <66>; + interrupt-names = "macirq"; + phy-mode = "rgmii-id"; + snps,fixed-burst; + snps,axi-config = <&stmmac_axi_setup>; + snps,pbl = <32>; + phy-handle = <&phy0>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml index e564f20d8f41..a3607d55ef36 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm4329-fmac.yaml @@ -53,6 +53,7 @@ properties: - pci14e4,4488 # BCM4377 - pci14e4,4425 # BCM4378 - pci14e4,4433 # BCM4387 + - pci14e4,449d # BCM43752 reg: description: SDIO function number for the device (for most cases @@ -121,6 +122,14 @@ properties: NVRAM. This would normally be filled in by the bootloader from platform configuration data. + clocks: + items: + - description: External Low Power Clock input (32.768KHz) + + clock-names: + items: + - const: lpo + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml index 2460ccc08237..5d40f22765bb 100644 --- a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml @@ -16,7 +16,11 @@ description: properties: compatible: - const: microchip,wilc1000 + oneOf: + - items: + - const: microchip,wilc3000 + - const: microchip,wilc1000 + - const: microchip,wilc1000 reg: true diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml index 8675d7d0215c..a71fdf05bc1e 100644 --- a/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath11k-pci.yaml @@ -50,6 +50,9 @@ properties: vddrfa1p7-supply: description: VDD_RFA_1P7 supply regulator handle + vddrfa1p8-supply: + description: VDD_RFA_1P8 supply regulator handle + vddpcie0p9-supply: description: VDD_PCIE_0P9 supply regulator handle @@ -77,6 +80,22 @@ allOf: - vddrfa1p7-supply - vddpcie0p9-supply - vddpcie1p8-supply + - if: + properties: + compatible: + contains: + const: pci17cb,1103 + then: + required: + - vddrfacmn-supply + - vddaon-supply + - vddwlcx-supply + - vddwlmx-supply + - vddrfa0p8-supply + - vddrfa1p2-supply + - vddrfa1p8-supply + - vddpcie0p9-supply + - vddpcie1p8-supply additionalProperties: false @@ -99,6 +118,16 @@ examples: compatible = "pci17cb,1103"; reg = <0x10000 0x0 0x0 0x0 0x0>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + qcom,ath11k-calibration-variant = "LE_X13S"; }; }; diff --git a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml index 92d8ade988f6..e16384aff557 100644 --- a/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml +++ b/Documentation/devicetree/bindings/net/xlnx,emaclite.yaml @@ -29,6 +29,9 @@ properties: interrupts: maxItems: 1 + clocks: + maxItems: 1 + phy-handle: true local-mac-address: true @@ -45,6 +48,7 @@ required: - compatible - reg - interrupts + - clocks - phy-handle additionalProperties: false @@ -56,6 +60,7 @@ examples: reg = <0x40e00000 0x10000>; interrupt-parent = <&axi_intc_1>; interrupts = <1>; + clocks = <&dummy>; local-mac-address = [00 00 00 00 00 00]; phy-handle = <&phy0>; xlnx,rx-ping-pong; |