diff options
Diffstat (limited to 'Documentation/devicetree/bindings/opp')
| -rw-r--r-- | Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt (renamed from Documentation/devicetree/bindings/opp/kryo-cpufreq.txt) | 127 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/opp/qcom-opp.txt | 19 |
2 files changed, 140 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt index c2127b96805a..4751029b9b74 100644 --- a/Documentation/devicetree/bindings/opp/kryo-cpufreq.txt +++ b/Documentation/devicetree/bindings/opp/qcom-nvmem-cpufreq.txt @@ -1,25 +1,38 @@ -Qualcomm Technologies, Inc. KRYO CPUFreq and OPP bindings +Qualcomm Technologies, Inc. NVMEM CPUFreq and OPP bindings =================================== -In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996 -that have KRYO processors, the CPU ferequencies subset and voltage value -of each OPP varies based on the silicon variant in use. +In Certain Qualcomm Technologies, Inc. SoCs like apq8096 and msm8996, +the CPU frequencies subset and voltage value of each OPP varies based on +the silicon variant in use. Qualcomm Technologies, Inc. Process Voltage Scaling Tables defines the voltage and frequency value based on the msm-id in SMEM and speedbin blown in the efuse combination. -The qcom-cpufreq-kryo driver reads the msm-id and efuse value from the SoC +The qcom-cpufreq-nvmem driver reads the msm-id and efuse value from the SoC to provide the OPP framework with required information (existing HW bitmap). This is used to determine the voltage and frequency value for each OPP of operating-points-v2 table when it is parsed by the OPP framework. Required properties: -------------------- -In 'cpus' nodes: +In 'cpu' nodes: - operating-points-v2: Phandle to the operating-points-v2 table to use. In 'operating-points-v2' table: - compatible: Should be - 'operating-points-v2-kryo-cpu' for apq8096 and msm8996. + +Optional properties: +-------------------- +In 'cpu' nodes: +- power-domains: A phandle pointing to the PM domain specifier which provides + the performance states available for active state management. + Please refer to the power-domains bindings + Documentation/devicetree/bindings/power/power_domain.txt + and also examples below. +- power-domain-names: Should be + - 'cpr' for qcs404. + +In 'operating-points-v2' table: - nvmem-cells: A phandle pointing to a nvmem-cells node representing the efuse registers that has information about the speedbin that is used to select the right frequency/voltage @@ -678,3 +691,105 @@ soc { }; }; }; + +Example 2: +--------- + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + CPU0: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + .... + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU1: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + .... + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU2: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + .... + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + + CPU3: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + .... + clocks = <&apcs_glb>; + operating-points-v2 = <&cpu_opp_table>; + power-domains = <&cpr>; + power-domain-names = "cpr"; + }; + }; + + cpu_opp_table: cpu-opp-table { + compatible = "operating-points-v2-kryo-cpu"; + opp-shared; + + opp-1094400000 { + opp-hz = /bits/ 64 <1094400000>; + required-opps = <&cpr_opp1>; + }; + opp-1248000000 { + opp-hz = /bits/ 64 <1248000000>; + required-opps = <&cpr_opp2>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + required-opps = <&cpr_opp3>; + }; + }; + + cpr_opp_table: cpr-opp-table { + compatible = "operating-points-v2-qcom-level"; + + cpr_opp1: opp1 { + opp-level = <1>; + qcom,opp-fuse-level = <1>; + }; + cpr_opp2: opp2 { + opp-level = <2>; + qcom,opp-fuse-level = <2>; + }; + cpr_opp3: opp3 { + opp-level = <3>; + qcom,opp-fuse-level = <3>; + }; + }; + +.... + +soc { +.... + cpr: power-controller@b018000 { + compatible = "qcom,qcs404-cpr", "qcom,cpr"; + reg = <0x0b018000 0x1000>; + .... + vdd-apc-supply = <&pms405_s3>; + #power-domain-cells = <0>; + operating-points-v2 = <&cpr_opp_table>; + .... + }; +}; diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt new file mode 100644 index 000000000000..32eb0793c7e6 --- /dev/null +++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt @@ -0,0 +1,19 @@ +Qualcomm OPP bindings to describe OPP nodes + +The bindings are based on top of the operating-points-v2 bindings +described in Documentation/devicetree/bindings/opp/opp.txt +Additional properties are described below. + +* OPP Table Node + +Required properties: +- compatible: Allow OPPs to express their compatibility. It should be: + "operating-points-v2-qcom-level" + +* OPP Node + +Required properties: +- qcom,opp-fuse-level: A positive value representing the fuse corner/level + associated with this OPP node. Sometimes several corners/levels shares + a certain fuse corner/level. A fuse corner/level contains e.g. ref uV, + min uV, and max uV. |