diff options
Diffstat (limited to 'Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml')
-rw-r--r-- | Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml | 167 |
1 files changed, 167 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml new file mode 100644 index 000000000000..cbee87802559 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml @@ -0,0 +1,167 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/hisilicon,kirin-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HiSilicon Kirin SoCs PCIe host DT description + +maintainers: + - Xiaowei Song <songxiaowei@hisilicon.com> + - Binghui Wang <wangbinghui@hisilicon.com> + +description: | + Kirin PCIe host controller is based on the Synopsys DesignWare PCI core. + It shares common functions with the PCIe DesignWare core driver and + inherits common properties defined in + Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml. + +allOf: + - $ref: /schemas/pci/snps,dw-pcie.yaml# + +properties: + compatible: + contains: + enum: + - hisilicon,kirin960-pcie + - hisilicon,kirin970-pcie + + reg: + description: | + Should contain dbi, apb, config registers location and length. + For hisilicon,kirin960-pcie, it should also contain phy. + minItems: 3 + maxItems: 4 + + reg-names: + minItems: 3 + maxItems: 4 + + hisilicon,clken-gpios: + description: | + Clock input enablement GPIOs from PCI devices like Ethernet, M.2 and + mini-PCIe slots. + +required: + - compatible + - reg + - reg-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/hi3660-clock.h> + #include <dt-bindings/clock/hi3670-clock.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + pcie@f4000000 { + compatible = "hisilicon,kirin960-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000>, + <0x0 0xff3fe000 0x0 0x1000>, + <0x0 0xf3f20000 0x0 0x40000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "phy", "config"; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = <0 283 4>; + interrupt-names = "msi"; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_PCIEPHY_REF>, + <&crg_ctrl HI3660_CLK_GATE_PCIEAUX>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_PHY>, + <&crg_ctrl HI3660_PCLK_GATE_PCIE_SYS>, + <&crg_ctrl HI3660_ACLK_GATE_PCIE>; + clock-names = "pcie_phy_ref", "pcie_aux", "pcie_apb_phy", + "pcie_apb_sys", "pcie_aclk"; + }; + + pcie@f5000000 { + compatible = "hisilicon,kirin970-pcie"; + reg = <0x0 0xf4000000 0x0 0x1000000>, + <0x0 0xfc180000 0x0 0x1000>, + <0x0 0xf5000000 0x0 0x2000>; + reg-names = "dbi", "apb", "config"; + bus-range = <0x0 0xff>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + phys = <&pcie_phy>; + ranges = <0x02000000 0x0 0x00000000 + 0x0 0xf6000000 + 0x0 0x02000000>; + num-lanes = <1>; + #interrupt-cells = <1>; + interrupts = <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0x0 0 0 1 &gic GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 2 &gic GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 3 &gic GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>, + <0x0 0 0 4 &gic GIC_SPI 285 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio7 0 0>; + hisilicon,clken-gpios = <&gpio27 3 0>, <&gpio17 0 0>, <&gpio20 6 0>; + pcie@0,0 { // Lane 0: PCIe switch: Bus 1, Device 0 + reg = <0 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@0,0 { // Lane 0: upstream + reg = <0 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + pcie@1,0 { // Lane 4: M.2 + reg = <0x0800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio3 1 0>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pcie@5,0 { // Lane 5: Mini PCIe + reg = <0x2800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio27 4 0 >; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + + pcie@7,0 { // Lane 6: Ethernet + reg = <0x03800 0 0 0 0>; + compatible = "pciclass,0604"; + device_type = "pci"; + reset-gpios = <&gpio25 2 0 >; + #address-cells = <3>; + #size-cells = <2>; + ranges; + }; + }; + }; + }; + }; |