1 files changed, 0 insertions, 116 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
deleted file mode 100644
index 240d429f773b..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/intel,lgm-pinctrl.yaml
+++ /dev/null
@@ -1,116 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/bindings/pinctrl/intel,lgm-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Intel Lightning Mountain SoC pinmux & GPIO controller binding
-
-maintainers:
-  - Rahul Tanwar <rahul.tanwar@linux.intel.com>
-
-description: |
-  Pinmux & GPIO controller controls pin multiplexing & configuration including
-  GPIO function selection & GPIO attributes configuration.
-
-  Please refer to [1] for details of the common pinctrl bindings used by the
-  client devices.
-
-  [1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-properties:
-  compatible:
-    const: intel,lgm-io
-
-  reg:
-    maxItems: 1
-
-# Client device subnode's properties
-patternProperties:
-  '-pins$':
-    type: object
-    description:
-      Pinctrl node's client devices use subnodes for desired pin configuration.
-      Client device subnodes use below standard properties.
-
-    properties:
-      function:
-        $ref: /schemas/types.yaml#/definitions/string
-        description:
-          A string containing the name of the function to mux to the group.
-
-      groups:
-        $ref: /schemas/types.yaml#/definitions/string-array
-        description:
-          An array of strings identifying the list of groups.
-
-      pins:
-        $ref: /schemas/types.yaml#/definitions/uint32-array
-        description:
-          List of pins to select with this function.
-
-      pinmux:
-        description: The applicable mux group.
-        allOf:
-          - $ref: "/schemas/types.yaml#/definitions/uint32-array"
-
-      bias-pull-up:
-        type: boolean
-
-      bias-pull-down:
-        type: boolean
-
-      drive-strength:
-        description: |
-          Selects the drive strength for the specified pins in mA.
-          0: 2 mA
-          1: 4 mA
-          2: 8 mA
-          3: 12 mA
-        allOf:
-          - $ref: /schemas/types.yaml#/definitions/uint32
-          - enum: [0, 1, 2, 3]
-
-      slew-rate:
-        type: boolean
-        description: |
-          Sets slew rate for specified pins.
-          0: slow slew
-          1: fast slew
-
-      drive-open-drain:
-        type: boolean
-
-      output-enable:
-        type: boolean
-
-    required:
-      - function
-      - groups
-
-    additionalProperties: false
-
-required:
-  - compatible
-  - reg
-
-additionalProperties: false
-
-examples:
-  # Pinmux controller node
-  - |
-    pinctrl: pinctrl@e2880000 {
-        compatible = "intel,lgm-pinctrl";
-        reg = <0xe2880000 0x100000>;
-
-        uart0-pins {
-             pins = <64>, /* UART_RX0 */
-                    <65>; /* UART_TX0 */
-             function = "CONSOLE_UART0";
-             pinmux = <1>,
-                      <1>;
-             groups = "CONSOLE_UART0";
-          };
-    };
-
-...