1 files changed, 0 insertions, 177 deletions
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
deleted file mode 100644
index ac423f4c3f1b..000000000000
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt
+++ /dev/null
@@ -1,177 +0,0 @@
-Qualcomm WCNSS Peripheral Image Loader
-
-This document defines the binding for a component that loads and boots firmware
-on the Qualcomm WCNSS core.
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,riva-pil",
-		    "qcom,pronto-v1-pil",
-		    "qcom,pronto-v2-pil"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must specify the base address and size of the CCU, DXE and
-		    PMU register blocks
-
-- reg-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: must be "ccu", "dxe", "pmu"
-
-- interrupts-extended:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: must list the watchdog and fatal IRQs and may specify the
-		    ready, handover and stop-ack IRQs
-
-- interrupt-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "wdog", "fatal", optionally followed by "ready",
-		    "handover", "stop-ack"
-
-- firmware-name:
-	Usage: optional
-	Value type: <string>
-	Definition: must list the relative firmware image path for the
-		    WCNSS core. Defaults to "wcnss.mdt".
-
-- vddmx-supply: (deprecated for qcom,pronto-v1/2-pil)
-- vddcx-supply: (deprecated for qcom,pronto-v1/2-pil)
-- vddpx-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the regulators to be held on behalf of the
-		    booting of the WCNSS core
-
-- power-domains:
-	Usage: required (for qcom,pronto-v1/2-pil)
-	Value type: <phandle>
-	Definition: reference to the power domains to be held on behalf of the
-		    booting of the WCNSS core
-
-- power-domain-names:
-	Usage: required (for qcom,pronto-v1/2-pil)
-	Value type: <stringlist>
-	Definition: must be "cx", "mx"
-
-- qcom,smem-states:
-	Usage: optional
-	Value type: <prop-encoded-array>
-	Definition: reference to the SMEM state used to indicate to WCNSS that
-		    it should shut down
-
-- qcom,smem-state-names:
-	Usage: optional
-	Value type: <stringlist>
-	Definition: should be "stop"
-
-- memory-region:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: reference to reserved-memory node for the remote processor
-		    see ../reserved-memory/reserved-memory.txt
-
-= SUBNODES
-A required subnode of the WCNSS PIL is used to describe the attached rf module
-and its resource dependencies. It is described by the following properties:
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,wcn3620",
-		    "qcom,wcn3660",
-		    "qcom,wcn3660b",
-		    "qcom,wcn3680"
-
-- clocks:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: should specify the xo clock and optionally the rf clock
-
-- clock-names:
-	Usage: required
-	Value type: <stringlist>
-	Definition: should be "xo", optionally followed by "rf"
-
-- vddxo-supply:
-- vddrfa-supply:
-- vddpa-supply:
-- vdddig-supply:
-	Usage: required
-	Value type: <phandle>
-	Definition: reference to the regulators to be held on behalf of the
-		    booting of the WCNSS core
-
-
-The wcnss node can also have an subnode named "smd-edge" that describes the SMD
-edge, channels and devices related to the WCNSS.
-See ../soc/qcom/qcom,smd.yaml for details on how to describe the SMD edge.
-
-= EXAMPLE
-The following example describes the resources needed to boot control the WCNSS,
-with attached WCN3680, as it is commonly found on MSM8974 boards.
-
-pronto@fb204000 {
-	compatible = "qcom,pronto-v2-pil";
-	reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
-	reg-names = "ccu", "dxe", "pmu";
-
-	interrupts-extended = <&intc 0 149 1>,
-			      <&wcnss_smp2p_slave 0 0>,
-			      <&wcnss_smp2p_slave 1 0>,
-			      <&wcnss_smp2p_slave 2 0>,
-			      <&wcnss_smp2p_slave 3 0>;
-	interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
-
-	power-domains = <&rpmpd MSM8974_VDDCX>, <&rpmpd MSM8974_VDDMX>;
-	power-domain-names = "cx", "mx";
-
-	vddpx-supply = <&pm8941_s3>;
-
-	qcom,smem-states = <&wcnss_smp2p_out 0>;
-	qcom,smem-state-names = "stop";
-
-	memory-region = <&wcnss_region>;
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&wcnss_pin_a>;
-
-	iris {
-		compatible = "qcom,wcn3680";
-
-		clocks = <&rpmcc RPM_CXO_CLK_SRC>, <&rpmcc RPM_CXO_A2>;
-		clock-names = "xo", "rf";
-
-		vddxo-supply = <&pm8941_l6>;
-		vddrfa-supply = <&pm8941_l11>;
-		vddpa-supply = <&pm8941_l19>;
-		vdddig-supply = <&pm8941_s3>;
-	};
-
-	smd-edge {
-		interrupts = <0 142 1>;
-
-		qcom,ipc = <&apcs 8 17>;
-		qcom,smd-edge = <6>;
-		qcom,remote-pid = <4>;
-
-		label = "pronto";
-
-		wcnss {
-			compatible = "qcom,wcnss";
-			qcom,smd-channels = "WCNSS_CTRL";
-
-			qcom,mmio = <&pronto>;
-
-			bt {
-				compatible = "qcom,wcnss-bt";
-			};
-		};
-	};
-};