1 files changed, 0 insertions, 39 deletions
diff --git a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt b/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
deleted file mode 100644
index 922dcb8ff24a..000000000000
--- a/Documentation/devicetree/bindings/slimbus/slim-qcom-ctrl.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-Qualcomm SLIMbus controller
-This controller is used if applications processor driver controls SLIMbus
-master component.
-
-Required properties:
-
- - #address-cells - refer to Documentation/devicetree/bindings/slimbus/bus.txt
- - #size-cells	- refer to Documentation/devicetree/bindings/slimbus/bus.txt
-
- - reg : Offset and length of the register region(s) for the device
- - reg-names : Register region name(s) referenced in reg above
-	 Required register resource entries are:
-	 "ctrl": Physical address of controller register blocks
- 	 "slew": required for "qcom,apq8064-slim" SOC.
- - compatible : should be "qcom,<SOC-NAME>-slim" for SOC specific compatible
- 		followed by "qcom,slim" for fallback.
- - interrupts : Interrupt number used by this controller
- - clocks : Interface and core clocks used by this SLIMbus controller
- - clock-names : Required clock-name entries are:
-	"iface" : Interface clock for this controller
-	"core" : Interrupt for controller core's BAM
-
-Example:
-
-	slim@28080000 {
-		compatible = "qcom,apq8064-slim", "qcom,slim";
-		reg = <0x28080000 0x2000>, <0x80207C 4>;
-		reg-names = "ctrl", "slew";
-		interrupts = <0 33 0>;
-		clocks = <&lcc SLIMBUS_SRC>, <&lcc AUDIO_SLIMBUS_CLK>;
-		clock-names = "iface", "core";
-		#address-cells = <2>;
-		#size-cell = <0>;
-
-		wcd9310: audio-codec@1,0{
-			compatible = "slim217,60";
-			reg = <1 0>;
-		};
-	};