1 files changed, 0 insertions, 61 deletions
diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
deleted file mode 100644
index f96511aa3897..000000000000
--- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-* Rockchip General Register Files (GRF)
-
-The general register file will be used to do static set by software, which
-is composed of many registers for system control.
-
-From RK3368 SoCs, the GRF is divided into two sections,
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- PMUGRF, used for always on system
-
-On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
-
-ON RK3308 SoC, the GRF is divided into four sections:
-- GRF, used for general non-secure system,
-- SGRF, used for general secure system,
-- DETECTGRF, used for audio codec system,
-- COREGRF, used for pvtm,
-
-Required Properties:
-
-- compatible: GRF should be one of the following:
-   - "rockchip,px30-grf", "syscon": for px30
-   - "rockchip,rk3036-grf", "syscon": for rk3036
-   - "rockchip,rk3066-grf", "syscon": for rk3066
-   - "rockchip,rk3188-grf", "syscon": for rk3188
-   - "rockchip,rk3228-grf", "syscon": for rk3228
-   - "rockchip,rk3288-grf", "syscon": for rk3288
-   - "rockchip,rk3308-grf", "syscon": for rk3308
-   - "rockchip,rk3328-grf", "syscon": for rk3328
-   - "rockchip,rk3368-grf", "syscon": for rk3368
-   - "rockchip,rk3399-grf", "syscon": for rk3399
-   - "rockchip,rv1108-grf", "syscon": for rv1108
-- compatible: DETECTGRF should be one of the following:
-   - "rockchip,rk3308-detect-grf", "syscon": for rk3308
-- compatilbe: COREGRF should be one of the following:
-   - "rockchip,rk3308-core-grf", "syscon": for rk3308
-- compatible: PMUGRF should be one of the following:
-   - "rockchip,px30-pmugrf", "syscon": for px30
-   - "rockchip,rk3368-pmugrf", "syscon": for rk3368
-   - "rockchip,rk3399-pmugrf", "syscon": for rk3399
-- compatible: SGRF should be one of the following:
-   - "rockchip,rk3288-sgrf", "syscon": for rk3288
-- compatible: USB2PHYGRF should be one of the following:
-   - "rockchip,px30-usb2phy-grf", "syscon": for px30
-   - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
-- compatible: USBGRF should be one of the following:
-   - "rockchip,rv1108-usbgrf", "syscon": for rv1108
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-Example: GRF and PMUGRF of RK3399 SoCs
-
-	pmugrf: syscon@ff320000 {
-		compatible = "rockchip,rk3399-pmugrf", "syscon";
-		reg = <0x0 0xff320000 0x0 0x1000>;
-	};
-
-	grf: syscon@ff770000 {
-		compatible = "rockchip,rk3399-grf", "syscon";
-		reg = <0x0 0xff770000 0x0 0x10000>;
-	};