1 files changed, 0 insertions, 55 deletions
diff --git a/Documentation/devicetree/bindings/sound/atmel-classd.txt b/Documentation/devicetree/bindings/sound/atmel-classd.txt
deleted file mode 100644
index 898551076382..000000000000
--- a/Documentation/devicetree/bindings/sound/atmel-classd.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-* Atmel ClassD driver under ALSA SoC architecture
-
-Required properties:
-- compatible
-	Should be "atmel,sama5d2-classd".
-- reg
-	Should contain ClassD registers location and length.
-- interrupts
-	Should contain the IRQ line for the ClassD.
-- dmas
-	One DMA specifiers as described in atmel-dma.txt and dma.txt files.
-- dma-names
-	Must be "tx".
-- clock-names
-	Tuple listing input clock names.
-	Required elements: "pclk" and "gclk".
-- clocks
-	Please refer to clock-bindings.txt.
-- assigned-clocks
-	Should be <&classd_gclk>.
-
-Optional properties:
-- pinctrl-names, pinctrl-0
-	Please refer to pinctrl-bindings.txt.
-- atmel,model
-	The user-visible name of this sound complex.
-	The default value is "CLASSD".
-- atmel,pwm-type
-	PWM modulation type, "single" or "diff".
-	The default value is "single".
-- atmel,non-overlap-time
-	Set non-overlapping time, the unit is nanosecond(ns).
-	There are four values,
-	<5>, <10>, <15>, <20>, the default value is <10>.
-	Non-overlapping will be disabled if not specified.
-
-Example:
-classd: classd@fc048000 {
-		compatible = "atmel,sama5d2-classd";
-		reg = <0xfc048000 0x100>;
-		interrupts = <59 IRQ_TYPE_LEVEL_HIGH 7>;
-		dmas = <&dma0
-			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
-			| AT91_XDMAC_DT_PERID(47))>;
-		dma-names = "tx";
-		clocks = <&classd_clk>, <&classd_gclk>;
-		clock-names = "pclk", "gclk";
-		assigned-clocks = <&classd_gclk>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_classd_default>;
-		atmel,model = "classd @ SAMA5D2-Xplained";
-		atmel,pwm-type = "diff";
-		atmel,non-overlap-time = <10>;
-};