1 files changed, 0 insertions, 56 deletions
diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt
deleted file mode 100644
index 77df82e36138..000000000000
--- a/Documentation/devicetree/bindings/usb/keystone-usb.txt
+++ /dev/null
@@ -1,56 +0,0 @@
-TI Keystone Soc USB Controller
-
-DWC3 GLUE
-
-Required properties:
- - compatible: should be
-		"ti,keystone-dwc3" for Keystone 2 SoCs
-		"ti,am654-dwc3" for AM654 SoC
- - #address-cells, #size-cells : should be '1' if the device has sub-nodes
-   with 'reg' property.
- - reg : Address and length of the register set for the USB subsystem on
-   the SOC.
- - interrupts : The irq number of this device that is used to interrupt the
-   MPU.
- - ranges: allows valid 1:1 translation between child's address space and
-   parent's address space.
-
-SoC-specific Required Properties:
-The following are mandatory properties for Keystone 2 66AK2HK, 66AK2L and 66AK2E
-SoCs only:
-
-- clocks:		Clock ID for USB functional clock.
-- clock-names:		Must be "usb".
-
-
-The following are mandatory properties for 66AK2G and AM654:
-
-- power-domains:	Should contain a phandle to a PM domain provider node
-			and an args specifier containing the USB device id
-			value. This property is as per the binding,
-			Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt
-
-Sub-nodes:
-The dwc3 core should be added as subnode to Keystone DWC3 glue.
-- dwc3 :
-   The binding details of dwc3 can be found in:
-   Documentation/devicetree/bindings/usb/dwc3.txt
-
-Example:
-	usb: usb@2680000 {
-		compatible = "ti,keystone-dwc3";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		reg = <0x2680000 0x10000>;
-		clocks = <&clkusb>;
-		clock-names = "usb";
-		interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-		ranges;
-
-		dwc3@2690000 {
-			compatible = "synopsys,dwc3";
-			reg = <0x2690000 0x70000>;
-			interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
-			usb-phy = <&usb_phy>, <&usb_phy>;
-		};
-	};