diff options
Diffstat (limited to 'Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt | 20 |
1 files changed, 10 insertions, 10 deletions
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index 5611a2e4ddf0..30595964876a 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -26,10 +26,11 @@ Required properties: - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - clock-names : must contain - "sys_ck": for clock of xHCI MAC - "ref_ck": for reference clock of xHCI MAC - "wakeup_deb_p0": for USB wakeup debounce clock of port0 - "wakeup_deb_p1": for USB wakeup debounce clock of port1 + "sys_ck": controller clock used by normal mode, + the following ones are optional: + "ref_ck": reference clock used by low power mode etc, + "mcu_ck": mcu_bus clock for register access, + "dma_ck": dma_bus clock for data transfer by DMA - phys : a list of phandle + phy specifier pairs @@ -38,6 +39,8 @@ Optional properties: mode; - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup control register, it depends on "mediatek,wakeup-src". + - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc; - vbus-supply : reference to the VBUS regulator; - usb3-lpm-capable : supports USB3.0 LPM - pinctrl-names : a pinctrl state named "default" must be defined @@ -55,9 +58,7 @@ usb30: usb@11270000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; + clock-names = "sys_ck", "ref_ck"; phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>; vusb33-supply = <&mt6397_vusb_reg>; @@ -89,9 +90,8 @@ Required properties: - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - - clock-names : must be - "sys_ck": for clock of xHCI MAC - "ref_ck": for reference clock of xHCI MAC + - clock-names : must contain "sys_ck", and the following ones are optional: + "ref_ck", "mcu_ck" and "dma_ck" Optional properties: - vbus-supply : reference to the VBUS regulator; |