1 files changed, 0 insertions, 30 deletions
diff --git a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt b/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
deleted file mode 100644
index ec80641208a5..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-conn-gpio.txt
+++ /dev/null
@@ -1,30 +0,0 @@
-USB GPIO Based Connection Detection
-
-This is typically used to switch dual role mode from the USB ID pin connected
-to an input GPIO, and also used to enable/disable device mode from the USB
-Vbus pin connected to an input GPIO.
-
-Required properties:
-- compatible : should include "gpio-usb-b-connector" and "usb-b-connector".
-- id-gpios, vbus-gpios : input gpios, either one of them must be present,
-	and both can be present as well.
-	see connector/usb-connector.yaml
-
-Optional properties:
-- vbus-supply : can be present if needed when supports dual role mode.
-	see connector/usb-connector.yaml
-
-- Sub-nodes:
-	- port : can be present.
-		see graph.txt
-
-Example:
-
-&mtu3 {
-	connector {
-		compatible = "gpio-usb-b-connector", "usb-b-connector";
-		type = "micro";
-		id-gpios = <&pio 12 GPIO_ACTIVE_HIGH>;
-		vbus-supply = <&usb_p0_vbus>;
-	};
-};