diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
7 files changed, 139 insertions, 60 deletions
diff --git a/Documentation/devicetree/bindings/serial/8250_omap.yaml b/Documentation/devicetree/bindings/serial/8250_omap.yaml index 70ca61688bb9..7b34ec8fa90e 100644 --- a/Documentation/devicetree/bindings/serial/8250_omap.yaml +++ b/Documentation/devicetree/bindings/serial/8250_omap.yaml @@ -86,7 +86,7 @@ required: - reg - interrupts -additionalProperties: false +unevaluatedProperties: false if: properties: diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt deleted file mode 100644 index 8b2b0460259a..000000000000 --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt +++ /dev/null @@ -1,36 +0,0 @@ -* BCM63xx UART - -Required properties: - -- compatible: "brcm,bcm6345-uart" - -- reg: The base address of the UART register bank. - -- interrupts: A single interrupt specifier. - -- clocks: Clock driving the hardware; used to figure out the baud rate - divisor. - - -Optional properties: - -- clock-names: Should be "refclk". - -Example: - - uart0: serial@14e00520 { - compatible = "brcm,bcm6345-uart"; - reg = <0x14e00520 0x18>; - interrupt-parent = <&periph_intc>; - interrupts = <2>; - clocks = <&periph_clk>; - clock-names = "refclk"; - }; - - clocks { - periph_clk: periph_clk@0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <54000000>; - }; - }; diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml new file mode 100644 index 000000000000..a22285c43f80 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/brcm,bcm6345-uart.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: BCM63xx UART + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +allOf: + - $ref: serial.yaml# + +properties: + compatible: + const: brcm,bcm6345-uart + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: refclk + +unevaluatedProperties: false + +required: + - reg + - interrupts + - clocks + +examples: + - | + serial@14e00520 { + compatible = "brcm,bcm6345-uart"; + reg = <0x14e00520 0x18>; + interrupt-parent = <&periph_intc>; + interrupts = <2>; + clocks = <&periph_clk>; + clock-names = "refclk"; + }; diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml index f064e5b76cf1..2940afb874b3 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml +++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml @@ -26,6 +26,7 @@ properties: - samsung,s3c6400-uart - samsung,s5pv210-uart - samsung,exynos4210-uart + - samsung,exynos850-uart reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/serial/sprd-uart.yaml b/Documentation/devicetree/bindings/serial/sprd-uart.yaml index 09f6283f3cae..a444bebd2c1a 100644 --- a/Documentation/devicetree/bindings/serial/sprd-uart.yaml +++ b/Documentation/devicetree/bindings/serial/sprd-uart.yaml @@ -19,6 +19,7 @@ properties: - enum: - sprd,sc9860-uart - sprd,sc9863a-uart + - sprd,ums512-uart - const: sprd,sc9836-uart - const: sprd,sc9836-uart diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt deleted file mode 100644 index c37deb44dead..000000000000 --- a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.txt +++ /dev/null @@ -1,23 +0,0 @@ -Xilinx Axi Uartlite controller Device Tree Bindings ---------------------------------------------------------- - -Required properties: -- compatible : Can be either of - "xlnx,xps-uartlite-1.00.a" - "xlnx,opb-uartlite-1.00.b" -- reg : Physical base address and size of the Axi Uartlite - registers map. -- interrupts : Should contain the UART controller interrupt. - -Optional properties: -- port-number : Set Uart port number -- clock-names : Should be "s_axi_aclk" -- clocks : Input clock specifier. Refer to common clock bindings. - -Example: -serial@800c0000 { - compatible = "xlnx,xps-uartlite-1.00.a"; - reg = <0x0 0x800c0000 0x10000>; - interrupts = <0x0 0x6e 0x1>; - port-number = <0>; -}; diff --git a/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml new file mode 100644 index 000000000000..f7617b88c7c3 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/xlnx,opb-uartlite.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/xlnx,opb-uartlite.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Axi Uartlite + +maintainers: + - Peter Korsgaard <jacmet@sunsite.dk> + +properties: + compatible: + contains: + enum: + - xlnx,xps-uartlite-1.00.a + - xlnx,opb-uartlite-1.00.b + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + port-number: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Set Uart port number + + clocks: + maxItems: 1 + + clock-names: + const: s_axi_aclk + + current-speed: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + The fixed baud rate that the device was configured for. + + xlnx,data-bits: + enum: [5, 6, 7, 8] + description: + The fixed number of data bits that the device was configured for. + + xlnx,use-parity: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Whether parity checking was enabled when the device was configured. + + xlnx,odd-parity: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: + Whether odd parity was configured. + +required: + - compatible + - reg + - interrupts + - current-speed + - xlnx,data-bits + - xlnx,use-parity + +allOf: + - $ref: /schemas/serial.yaml# + - if: + properties: + xlnx,use-parity: + contains: + const: 1 + then: + required: + - xlnx,odd-parity + +unevaluatedProperties: false + +examples: + - | + serial@800c0000 { + compatible = "xlnx,xps-uartlite-1.00.a"; + reg = <0x800c0000 0x10000>; + interrupts = <0x0 0x6e 0x1>; + port-number = <0>; + current-speed = <115200>; + xlnx,data-bits = <8>; + xlnx,use-parity = <0>; + }; +... |