diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
363 files changed, 4710 insertions, 508 deletions
diff --git a/Documentation/devicetree/bindings/arm/actions.txt b/Documentation/devicetree/bindings/arm/actions.txt index 3bc7ea575564..ced764a8549e 100644 --- a/Documentation/devicetree/bindings/arm/actions.txt +++ b/Documentation/devicetree/bindings/arm/actions.txt @@ -21,6 +21,7 @@ Boards: Root node property compatible must contain, depending on board: + - Cubietech CubieBoard6: "cubietech,cubieboard6" - LeMaker Guitar Base Board rev. B: "lemaker,guitar-bb-rev-b", "lemaker,guitar" diff --git a/Documentation/devicetree/bindings/arm/amlogic.txt b/Documentation/devicetree/bindings/arm/amlogic.txt index 4e4bc0bae597..f747f47922c5 100644 --- a/Documentation/devicetree/bindings/arm/amlogic.txt +++ b/Documentation/devicetree/bindings/arm/amlogic.txt @@ -41,6 +41,10 @@ Boards with the Amlogic Meson GXM S912 SoC shall have the following properties: Required root node property: compatible: "amlogic,s912", "amlogic,meson-gxm"; +Boards with the Amlogic Meson AXG A113D SoC shall have the following properties: + Required root node property: + compatible: "amlogic,a113d", "amlogic,meson-axg"; + Board compatible values (alphabetically, grouped by SoC): - "geniatech,atv1200" (Meson6) @@ -71,8 +75,12 @@ Board compatible values (alphabetically, grouped by SoC): - "amlogic,q200" (Meson gxm s912) - "amlogic,q201" (Meson gxm s912) + - "khadas,vim2" (Meson gxm s912) - "kingnovel,r-box-pro" (Meson gxm S912) - "nexbox,a1" (Meson gxm s912) + - "tronsmart,vega-s96" (Meson gxm s912) + + - "amlogic,s400" (Meson axg a113d) Amlogic Meson Firmware registers Interface ------------------------------------------ diff --git a/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt new file mode 100644 index 000000000000..101dc21014ec --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/analog-top.txt @@ -0,0 +1,20 @@ +Amlogic Meson8 and Meson8b "analog top" registers: +-------------------------------------------------- + +The analog top registers contain information about the so-called +"metal revision" (which encodes the "minor version") of the SoC. + +Required properties: +- reg: the register range of the analog top registers +- compatible: depending on the SoC this should be one of: + - "amlogic,meson8-analog-top" + - "amlogic,meson8b-analog-top" + along with "syscon" + + +Example: + + analog_top: analog-top@81a8 { + compatible = "amlogic,meson8-analog-top", "syscon"; + reg = <0x81a8 0x14>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/assist.txt b/Documentation/devicetree/bindings/arm/amlogic/assist.txt new file mode 100644 index 000000000000..7656812b67b9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/assist.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b assist registers: +----------------------------------------------- + +The assist registers contain basic information about the SoC, +for example the encoded SoC part number. + +Required properties: +- reg: the register range of the assist registers +- compatible: should be "amlogic,meson-mx-assist" along with "syscon" + + +Example: + + assist: assist@7c00 { + compatible = "amlogic,meson-mx-assist", "syscon"; + reg = <0x7c00 0x200>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt new file mode 100644 index 000000000000..407e27f230ab --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/bootrom.txt @@ -0,0 +1,17 @@ +Amlogic Meson6/Meson8/Meson8b bootrom: +-------------------------------------- + +The bootrom register area can be used to access SoC specific +information, such as the "misc version". + +Required properties: +- reg: the register range of the bootrom registers +- compatible: should be "amlogic,meson-mx-bootrom" along with "syscon" + + +Example: + + bootrom: bootrom@d9040000 { + compatible = "amlogic,meson-mx-bootrom", "syscon"; + reg = <0xd9040000 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/pmu.txt b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt new file mode 100644 index 000000000000..72f8d08198b6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/pmu.txt @@ -0,0 +1,18 @@ +Amlogic Meson8 and Meson8b power-management-unit: +------------------------------------------------- + +The pmu is used to turn off and on different power domains of the SoCs +This includes the power to the CPU cores. + +Required node properties: +- compatible value : depending on the SoC this should be one of: + "amlogic,meson8-pmu" + "amlogic,meson8b-pmu" +- reg : physical base address and the size of the registers window + +Example: + + pmu@c81000e4 { + compatible = "amlogic,meson8b-pmu", "syscon"; + reg = <0xc81000e0 0x18>; + }; diff --git a/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt new file mode 100644 index 000000000000..3473ddaadfac --- /dev/null +++ b/Documentation/devicetree/bindings/arm/amlogic/smp-sram.txt @@ -0,0 +1,32 @@ +Amlogic Meson8 and Meson8b SRAM for smp bringup: +------------------------------------------------ + +Amlogic's SMP-capable SoCs use part of the sram for the bringup of the cores. +Once the core gets powered up it executes the code that is residing at a +specific location. + +Therefore a reserved section sub-node has to be added to the mmio-sram +declaration. + +Required sub-node properties: +- compatible : depending on the SoC this should be one of: + "amlogic,meson8-smp-sram" + "amlogic,meson8b-smp-sram" + +The rest of the properties should follow the generic mmio-sram discription +found in ../../misc/sram.txt + +Example: + + sram: sram@d9000000 { + compatible = "mmio-sram"; + reg = <0xd9000000 0x20000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0xd9000000 0x20000>; + + smp-sram@1ff80 { + compatible = "amlogic,meson8b-smp-sram"; + reg = <0x1ff80 0x8>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt index 0d0c1ae81bed..790e6b0b8306 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt @@ -164,6 +164,8 @@ Control registers for this memory controller's DDR PHY. Required properties: - compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v71.1" + "brcm,brcmstb-ddr-phy-v72.0" "brcm,brcmstb-ddr-phy-v225.1" "brcm,brcmstb-ddr-phy-v240.1" "brcm,brcmstb-ddr-phy-v240.2" @@ -184,7 +186,9 @@ Sequencer DRAM parameters and control registers. Used for Self-Refresh Power-Down (SRPD), among other things. Required properties: -- compatible : should contain "brcm,brcmstb-memc-ddr" +- compatible : should contain one of these + "brcm,brcmstb-memc-ddr-rev-b.2.2" + "brcm,brcmstb-memc-ddr" - reg : the MEMC DDR register range Example: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt new file mode 100644 index 000000000000..a124c7fc4dcd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.txt @@ -0,0 +1,14 @@ +Broadcom Hurricane 2 device tree bindings +--------------------------------------- + +Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs +are based on Broadcom's iProc SoC architecture and feature a single core Cortex +A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND +flash and a PCIe attached integrated switching engine. + +Boards with Hurricane SoCs shall have the following properties: + +Required root node property: + +BCM53342 +compatible = "brcm,bcm53342", "brcm,hr2"; diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index b92f12bd5244..a0009b72e9be 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -197,6 +197,8 @@ described below. "actions,s500-smp" "allwinner,sun6i-a31" "allwinner,sun8i-a23" + "amlogic,meson8-smp" + "amlogic,meson8b-smp" "arm,realview-smp" "brcm,bcm11351-cpu-method" "brcm,bcm23550" diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt index cd977db7630c..b404d592ce58 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt @@ -7,7 +7,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-apmixedsys" + - "mediatek,mt2712-apmixedsys", "syscon" - "mediatek,mt6797-apmixedsys" + - "mediatek,mt7622-apmixedsys" - "mediatek,mt8135-apmixedsys" - "mediatek,mt8173-apmixedsys" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt new file mode 100644 index 000000000000..9b8f578d5e19 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,audsys.txt @@ -0,0 +1,22 @@ +MediaTek AUDSYS controller +============================ + +The MediaTek AUDSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt7622-audsys", "syscon" +- #clock-cells: Must be 1 + +The AUDSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +audsys: audsys@11220000 { + compatible = "mediatek,mt7622-audsys", "syscon"; + reg = <0 0x11220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt index 4137196dd686..4010e37c53a0 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,bdpsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-bdpsys", "syscon" + - "mediatek,mt2712-bdpsys", "syscon" - #clock-cells: Must be 1 The bdpsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt index 768f3a5bc055..7aa3fa167668 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-ethsys", "syscon" + - "mediatek,mt7622-ethsys", "syscon" - #clock-cells: Must be 1 The ethsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt index beed7b594cea..f5629d64cef2 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,hifsys.txt @@ -8,6 +8,7 @@ Required Properties: - compatible: Should be: - "mediatek,mt2701-hifsys", "syscon" + - "mediatek,mt7622-hifsys", "syscon" - #clock-cells: Must be 1 The hifsys controller uses the common clk binding from diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt index 047b11ae5f45..868bd51a98be 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,imgsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-imgsys", "syscon" + - "mediatek,mt2712-imgsys", "syscon" - "mediatek,mt6797-imgsys", "syscon" - "mediatek,mt8173-imgsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt index 58d58e2006b8..566f153f9f83 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt @@ -8,7 +8,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-infracfg", "syscon" + - "mediatek,mt2712-infracfg", "syscon" - "mediatek,mt6797-infracfg", "syscon" + - "mediatek,mt7622-infracfg", "syscon" - "mediatek,mt8135-infracfg", "syscon" - "mediatek,mt8173-infracfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt new file mode 100644 index 000000000000..2df799cd06a7 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,jpgdecsys.txt @@ -0,0 +1,22 @@ +Mediatek jpgdecsys controller +============================ + +The Mediatek jpgdecsys controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt2712-jpgdecsys", "syscon" +- #clock-cells: Must be 1 + +The jpgdecsys controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +jpgdecsys: syscon@19000000 { + compatible = "mediatek,mt2712-jpgdecsys", "syscon"; + reg = <0 0x19000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt new file mode 100644 index 000000000000..b8fb03f3613e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mcucfg.txt @@ -0,0 +1,22 @@ +Mediatek mcucfg controller +============================ + +The Mediatek mcucfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mcucfg", "syscon" +- #clock-cells: Must be 1 + +The mcucfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mcucfg: syscon@10220000 { + compatible = "mediatek,mt2712-mcucfg", "syscon"; + reg = <0 0x10220000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt new file mode 100644 index 000000000000..859e67b416d5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mfgcfg.txt @@ -0,0 +1,22 @@ +Mediatek mfgcfg controller +============================ + +The Mediatek mfgcfg controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be one of: + - "mediatek,mt2712-mfgcfg", "syscon" +- #clock-cells: Must be 1 + +The mfgcfg controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +mfgcfg: syscon@13000000 { + compatible = "mediatek,mt2712-mfgcfg", "syscon"; + reg = <0 0x13000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt index 70529e0b58e9..4eb8bbe15c01 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,mmsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-mmsys", "syscon" + - "mediatek,mt2712-mmsys", "syscon" - "mediatek,mt6797-mmsys", "syscon" - "mediatek,mt8173-mmsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt new file mode 100644 index 000000000000..d5d5f1227665 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pciesys.txt @@ -0,0 +1,22 @@ +MediaTek PCIESYS controller +============================ + +The MediaTek PCIESYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-pciesys", "syscon" +- #clock-cells: Must be 1 + +The PCIESYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +pciesys: pciesys@1a100800 { + compatible = "mediatek,mt7622-pciesys", "syscon"; + reg = <0 0x1a100800 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt index e494366782aa..fb58ca8c2770 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,pericfg.txt @@ -8,6 +8,8 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-pericfg", "syscon" + - "mediatek,mt2712-pericfg", "syscon" + - "mediatek,mt7622-pericfg", "syscon" - "mediatek,mt8135-pericfg", "syscon" - "mediatek,mt8173-pericfg", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt new file mode 100644 index 000000000000..d113b8e741f3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt @@ -0,0 +1,22 @@ +MediaTek SGMIISYS controller +============================ + +The MediaTek SGMIISYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-sgmiisys", "syscon" +- #clock-cells: Must be 1 + +The SGMIISYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +sgmiisys: sgmiisys@1b128000 { + compatible = "mediatek,mt7622-sgmiisys", "syscon"; + reg = <0 0x1b128000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt new file mode 100644 index 000000000000..00760019da00 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ssusbsys.txt @@ -0,0 +1,22 @@ +MediaTek SSUSBSYS controller +============================ + +The MediaTek SSUSBSYS controller provides various clocks to the system. + +Required Properties: + +- compatible: Should be: + - "mediatek,mt7622-ssusbsys", "syscon" +- #clock-cells: Must be 1 + +The SSUSBSYS controller uses the common clk binding from +Documentation/devicetree/bindings/clock/clock-bindings.txt +The available clocks are defined in dt-bindings/clock/mt*-clk.h. + +Example: + +ssusbsys: ssusbsys@1a000000 { + compatible = "mediatek,mt7622-ssusbsys", "syscon"; + reg = <0 0x1a000000 0 0x1000>; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt index ec93ecbb9f3c..24014a7e2332 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt @@ -7,7 +7,9 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-topckgen" + - "mediatek,mt2712-topckgen", "syscon" - "mediatek,mt6797-topckgen" + - "mediatek,mt7622-topckgen" - "mediatek,mt8135-topckgen" - "mediatek,mt8173-topckgen" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt index d150104f928a..ea40d05089f8 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vdecsys.txt @@ -7,6 +7,7 @@ Required Properties: - compatible: Should be one of: - "mediatek,mt2701-vdecsys", "syscon" + - "mediatek,mt2712-vdecsys", "syscon" - "mediatek,mt6797-vdecsys", "syscon" - "mediatek,mt8173-vdecsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt index 8a93be643647..851545357e94 100644 --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,vencsys.txt @@ -6,6 +6,7 @@ The Mediatek vencsys controller provides various clocks to the system. Required Properties: - compatible: Should be one of: + - "mediatek,mt2712-vencsys", "syscon" - "mediatek,mt6797-vencsys", "syscon" - "mediatek,mt8173-vencsys", "syscon" - #clock-cells: Must be 1 diff --git a/Documentation/devicetree/bindings/arm/omap/ctrl.txt b/Documentation/devicetree/bindings/arm/omap/ctrl.txt index 3a4e5901ce31..ce8dabf8c0f9 100644 --- a/Documentation/devicetree/bindings/arm/omap/ctrl.txt +++ b/Documentation/devicetree/bindings/arm/omap/ctrl.txt @@ -21,6 +21,8 @@ Required properties: "ti,omap3-scm" "ti,omap4-scm-core" "ti,omap4-scm-padconf-core" + "ti,omap4-scm-wkup" + "ti,omap4-scm-padconf-wkup" "ti,omap5-scm-core" "ti,omap5-scm-padconf-core" "ti,dra7-scm-core" diff --git a/Documentation/devicetree/bindings/arm/realtek.txt b/Documentation/devicetree/bindings/arm/realtek.txt index 13d755787b4f..95839e19ae92 100644 --- a/Documentation/devicetree/bindings/arm/realtek.txt +++ b/Documentation/devicetree/bindings/arm/realtek.txt @@ -12,6 +12,8 @@ Required root node properties: Root node property compatible must contain, depending on board: + - MeLE V9: "mele,v9" + - ProBox2 AVA: "probox2,ava" - Zidoo X9S: "zidoo,x9s" diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index b003148e2945..326d24bca1a9 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -1,5 +1,9 @@ Rockchip platforms device tree bindings --------------------------------------- +- Amarula Vyasa RK3288 board + Required root node properties: + - compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; + - Asus Tinker board Required root node properties: - compatible = "asus,rk3288-tinker", "rockchip,rk3288"; diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index bf5fc59a6938..779f5614bcee 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -4,7 +4,6 @@ Properties: - compatible : should contain two values. First value must be one from following list: - "samsung,exynos3250-pmu" - for Exynos3250 SoC, - "samsung,exynos4210-pmu" - for Exynos4210 SoC, - - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, - "samsung,exynos5260-pmu" - for Exynos5260 SoC. @@ -62,7 +61,7 @@ pmu_system_controller: system-controller@10040000 { Example of clock consumer : -usb3503: usb3503@08 { +usb3503: usb3503@8 { /* ... */ clock-names = "refclk"; clocks = <&pmu_system_controller 0>; diff --git a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt index 3c551894f621..e13459618581 100644 --- a/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt +++ b/Documentation/devicetree/bindings/arm/samsung/samsung-boards.txt @@ -57,6 +57,7 @@ Required root node properties: - "hardkernel,odroid-xu3-lite" - for Exynos5422-based Hardkernel Odroid XU3 Lite board. - "hardkernel,odroid-xu4" - for Exynos5422-based Hardkernel Odroid XU4. + - "hardkernel,odroid-hc1" - for Exynos5422-based Hardkernel Odroid HC1. * Insignal - "insignal,arndale" - for Exynos5250-based Insignal Arndale board. @@ -71,7 +72,7 @@ Optional nodes: - compatible: only "samsung,secure-firmware" is currently supported - reg: address of non-secure SYSRAM used for communication with firmware - firmware@0203F000 { + firmware@203F000 { compatible = "samsung,secure-firmware"; reg = <0x0203F000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/arm/shmobile.txt b/Documentation/devicetree/bindings/arm/shmobile.txt index ae75cb3b1331..020d758fc0c5 100644 --- a/Documentation/devicetree/bindings/arm/shmobile.txt +++ b/Documentation/devicetree/bindings/arm/shmobile.txt @@ -39,6 +39,8 @@ SoCs: compatible = "renesas,r8a7795" - R-Car M3-W (R8A77960) compatible = "renesas,r8a7796" + - R-Car V3M (R8A77970) + compatible = "renesas,r8a77970" - R-Car D3 (R8A77995) compatible = "renesas,r8a77995" @@ -57,6 +59,8 @@ Boards: compatible = "renesas,bockw", "renesas,r8a7778" - Draak (RTP0RC77995SEB0010S) compatible = "renesas,draak", "renesas,r8a77995" + - Eagle (RTP0RC77970SEB0010S) + compatible = "renesas,eagle", "renesas,r8a77970" - Genmai (RTK772100BC00000BR) compatible = "renesas,genmai", "renesas,r7s72100" - GR-Peach (X28A-M01-E/F) @@ -65,7 +69,7 @@ Boards: compatible = "renesas,gose", "renesas,r8a7793" - H3ULCB (R-Car Starter Kit Premier, RTP0RC7795SKBX0010SA00 (H3 ES1.1)) H3ULCB (R-Car Starter Kit Premier, RTP0RC77951SKBX010SA00 (H3 ES2.0)) - compatible = "renesas,h3ulcb", "renesas,r8a7795"; + compatible = "renesas,h3ulcb", "renesas,r8a7795" - Henninger compatible = "renesas,henninger", "renesas,r8a7791" - iWave Systems RZ/G1E SODIMM SOM Development Platform (iW-RainboW-G22D) @@ -76,6 +80,8 @@ Boards: compatible = "iwave,g20d", "iwave,g20m", "renesas,r8a7743" - iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) compatible = "iwave,g20m", "renesas,r8a7743" + - Kingfisher (SBEV-RCAR-KF-M03) + compatible = "shimafuji,kingfisher" - Koelsch (RTP0RC7791SEB00010S) compatible = "renesas,koelsch", "renesas,r8a7791" - Kyoto Microcomputer Co. KZM-A9-Dual @@ -85,7 +91,7 @@ Boards: - Lager (RTP0RC7790SEB00010S) compatible = "renesas,lager", "renesas,r8a7790" - M3ULCB (R-Car Starter Kit Pro, RTP0RC7796SKBX0010SA09 (M3 ES1.0)) - compatible = "renesas,m3ulcb", "renesas,r8a7796"; + compatible = "renesas,m3ulcb", "renesas,r8a7796" - Marzen (R0P7779A00010S) compatible = "renesas,marzen", "renesas,r8a7779" - Porter (M2-LCDP) @@ -93,11 +99,11 @@ Boards: - RSKRZA1 (YR0K77210C000BE) compatible = "renesas,rskrza1", "renesas,r7s72100" - Salvator-X (RTP0RC7795SIPB0010S) - compatible = "renesas,salvator-x", "renesas,r8a7795"; + compatible = "renesas,salvator-x", "renesas,r8a7795" - Salvator-X (RTP0RC7796SIPB0011S) - compatible = "renesas,salvator-x", "renesas,r8a7796"; + compatible = "renesas,salvator-x", "renesas,r8a7796" - Salvator-XS (Salvator-X 2nd version, RTP0RC7795SIPB0012S) - compatible = "renesas,salvator-xs", "renesas,r8a7795"; + compatible = "renesas,salvator-xs", "renesas,r8a7795" - SILK (RTP0RC7794LCB00011S) compatible = "renesas,silk", "renesas,r8a7794" - SK-RZG1E (YR8A77450S000BE) diff --git a/Documentation/devicetree/bindings/arm/sp810.txt b/Documentation/devicetree/bindings/arm/sp810.txt index 6808fb5dee40..1b2ab1ff5587 100644 --- a/Documentation/devicetree/bindings/arm/sp810.txt +++ b/Documentation/devicetree/bindings/arm/sp810.txt @@ -33,7 +33,7 @@ Required properties: property with the highest frequency Example: - v2m_sysctl: sysctl@020000 { + v2m_sysctl: sysctl@20000 { compatible = "arm,sp810", "arm,primecell"; reg = <0x020000 0x1000>; clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; diff --git a/Documentation/devicetree/bindings/arm/spe-pmu.txt b/Documentation/devicetree/bindings/arm/spe-pmu.txt new file mode 100644 index 000000000000..93372f2a7df9 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spe-pmu.txt @@ -0,0 +1,20 @@ +* ARMv8.2 Statistical Profiling Extension (SPE) Performance Monitor Units (PMU) + +ARMv8.2 introduces the optional Statistical Profiling Extension for collecting +performance sample data using an in-memory trace buffer. + +** SPE Required properties: + +- compatible : should be one of: + "arm,statistical-profiling-extension-v1" + +- interrupts : Exactly 1 PPI must be listed. For heterogeneous systems where + SPE is only supported on a subset of the CPUs, please consult + the arm,gic-v3 binding for details on describing a PPI partition. + +** Example: + +spe-pmu { + compatible = "arm,statistical-profiling-extension-v1"; + interrupts = <GIC_PPI 05 IRQ_TYPE_LEVEL_HIGH &part1>; +}; diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt index d2c46449b4eb..e4beec3d9ad3 100644 --- a/Documentation/devicetree/bindings/arm/sunxi.txt +++ b/Documentation/devicetree/bindings/arm/sunxi.txt @@ -14,6 +14,8 @@ using one of the following compatible strings: allwinner,sun8i-a83t allwinner,sun8i-h2-plus allwinner,sun8i-h3 + allwinner-sun8i-r40 + allwinner,sun8i-v3s allwinner,sun9i-a80 allwinner,sun50i-a64 nextthing,gr8 diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt index 00318d083c9e..50095802fb4a 100644 --- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt +++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt @@ -37,7 +37,7 @@ Example: compatible = "arm,vexpress-sysreg"; reg = <0x10000000 0x1000>; - v2m_led_gpios: sys_led@08 { + v2m_led_gpios: sys_led@8 { compatible = "arm,vexpress-sysreg,sys_led"; gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/ata/ahci-ceva.txt b/Documentation/devicetree/bindings/ata/ahci-ceva.txt index 7ca8b976c13a..7561cc4de371 100644 --- a/Documentation/devicetree/bindings/ata/ahci-ceva.txt +++ b/Documentation/devicetree/bindings/ata/ahci-ceva.txt @@ -5,6 +5,36 @@ Required properties: - compatible: Compatibility string. Must be 'ceva,ahci-1v84'. - clocks: Input clock specifier. Refer to common clock bindings. - interrupts: Interrupt specifier. Refer to interrupt binding. + - ceva,p0-cominit-params: OOB timing value for COMINIT parameter for port 0. + - ceva,p1-cominit-params: OOB timing value for COMINIT parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-cominit-params = /bits/ 8 <CIBGMN CIBGMX CIBGN CINMP>; + CINMP : COMINIT Negate Minimum Period. + CIBGN : COMINIT Burst Gap Nominal. + CIBGMX: COMINIT Burst Gap Maximum. + CIBGMN: COMINIT Burst Gap Minimum. + - ceva,p0-comwake-params: OOB timing value for COMWAKE parameter for port 0. + - ceva,p1-comwake-params: OOB timing value for COMWAKE parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-comwake-params = /bits/ 8 <CWBGMN CWBGMX CWBGN CWNMP>; + CWBGMN: COMWAKE Burst Gap Minimum. + CWBGMX: COMWAKE Burst Gap Maximum. + CWBGN: COMWAKE Burst Gap Nominal. + CWNMP: COMWAKE Negate Minimum Period. + - ceva,p0-burst-params: Burst timing value for COM parameter for port 0. + - ceva,p1-burst-params: Burst timing value for COM parameter for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-burst-params = /bits/ 8 <BMX BNM SFD PTST>; + BMX: COM Burst Maximum. + BNM: COM Burst Nominal. + SFD: Signal Failure Detection value. + PTST: Partial to Slumber timer value. + - ceva,p0-retry-params: Retry interval timing value for port 0. + - ceva,p1-retry-params: Retry interval timing value for port 1. + The fields for the above parameter must be as shown below: + ceva,pN-retry-params = /bits/ 16 <RIT RCT>; + RIT: Retry Interval Timer. + RCT: Rate Change Timer. Optional properties: - ceva,broken-gen2: limit to gen1 speed instead of gen2. @@ -16,5 +46,14 @@ Examples: interrupt-parent = <&gic>; interrupts = <0 133 4>; clocks = <&clkc SATA_CLK_ID>; + ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; + + ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; + ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; + ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; + ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; ceva,broken-gen2; }; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index fedc213b5f1a..c760ecb81381 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -56,7 +56,7 @@ Examples: interrupts = <115>; }; - ahci: sata@01c18000 { + ahci: sata@1c18000 { compatible = "allwinner,sun4i-a10-ahci"; reg = <0x01c18000 0x1000>; interrupts = <56>; diff --git a/Documentation/devicetree/bindings/ata/imx-sata.txt b/Documentation/devicetree/bindings/ata/imx-sata.txt index fa511db18408..a3d14719e478 100644 --- a/Documentation/devicetree/bindings/ata/imx-sata.txt +++ b/Documentation/devicetree/bindings/ata/imx-sata.txt @@ -25,7 +25,7 @@ Optional properties: Examples: -sata@02200000 { +sata@2200000 { compatible = "fsl,imx6q-ahci"; reg = <0x02200000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt index 6630d842c7a3..683eaf3aed79 100644 --- a/Documentation/devicetree/bindings/bus/imx-weim.txt +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt @@ -61,7 +61,7 @@ Timing property for child nodes. It is mandatory, not optional. Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM: - weim: weim@021b8000 { + weim: weim@21b8000 { compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; clocks = <&clks 196>; diff --git a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt index 3dd28343b6ce..eb3ed628c6f1 100644 --- a/Documentation/devicetree/bindings/bus/sunxi-rsb.txt +++ b/Documentation/devicetree/bindings/bus/sunxi-rsb.txt @@ -28,7 +28,7 @@ which can normally be found in the datasheet. Example: - rsb@01f03400 { + rsb@1f03400 { compatible = "allwinner,sun8i-a23-rsb"; reg = <0x01f03400 0x400>; interrupts = <0 39 4>; diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt new file mode 100644 index 000000000000..fb1790e39398 --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt @@ -0,0 +1,93 @@ +Texas Instruments sysc interconnect target module wrapper binding + +Texas Instruments SoCs can have a generic interconnect target module +hardware for devices connected to various interconnects such as L3 +interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc +is mostly used for interaction between module and PRCM. It participates +in the OCP Disconnect Protocol but other than that is mostly independent +of the interconnect. + +Each interconnect target module can have one or more devices connected to +it. There is a set of control registers for managing interconnect target +module clocks, idle modes and interconnect level resets for the module. + +These control registers are sprinkled into the unused register address +space of the first child device IP block managed by the interconnect +target module and typically are named REVISION, SYSCONFIG and SYSSTATUS. + +Required standard properties: + +- compatible shall be one of the following generic types: + + "ti,sysc-omap2" + "ti,sysc-omap4" + "ti,sysc-omap4-simple" + + or one of the following derivative types for hardware + needing special workarounds: + + "ti,sysc-omap3430-sr" + "ti,sysc-omap3630-sr" + "ti,sysc-omap4-sr" + "ti,sysc-omap3-sham" + "ti,sysc-omap-aes" + "ti,sysc-mcasp" + "ti,sysc-usb-host-fs" + +- reg shall have register areas implemented for the interconnect + target module in question such as revision, sysc and syss + +- reg-names shall contain the register names implemented for the + interconnect target module in question such as + "rev, "sysc", and "syss" + +- ranges shall contain the interconnect target module IO range + available for one or more child device IP blocks managed + by the interconnect target module, the ranges may include + multiple ranges such as device L4 range for control and + parent L3 range for DMA access + +Optional properties: + +- clocks clock specifier for each name in the clock-names as + specified in the binding documentation for ti-clkctrl, + typically available for all interconnect targets on TI SoCs + based on omap4 except if it's read-only register in hwauto + mode as for example omap4 L4_CFG_CLKCTRL + +- clock-names should contain at least "fck", and optionally also "ick" + depending on the SoC and the interconnect target module + +- ti,hwmods optional TI interconnect module name to use legacy + hwmod platform data + + +Example: Single instance of MUSB controller on omap4 using interconnect ranges +using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000): + + target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */ + compatible = "ti,sysc-omap2"; + ti,hwmods = "usb_otg_hs"; + reg = <0x2b400 0x4>, + <0x2b404 0x4>, + <0x2b408 0x4>; + reg-names = "rev", "sysc", "syss"; + clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>; + clock-names = "fck"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x2b000 0x1000>; + + usb_otg_hs: otg@0 { + compatible = "ti,omap4-musb"; + reg = <0x0 0x7ff>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + usb-phy = <&usb2_phy>; + ... + }; + }; + +Note that other SoCs, such as am335x can have multipe child devices. On am335x +there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA +instance as children of a single interconnet target module. diff --git a/Documentation/devicetree/bindings/bus/ts-nbus.txt b/Documentation/devicetree/bindings/bus/ts-nbus.txt new file mode 100644 index 000000000000..2a10d065b9fa --- /dev/null +++ b/Documentation/devicetree/bindings/bus/ts-nbus.txt @@ -0,0 +1,50 @@ +Technologic Systems NBUS + +The NBUS is a bus used to interface with peripherals in the Technologic +Systems FPGA on the TS-4600 SoM. + +Required properties : + - compatible : "technologic,ts-nbus" + - #address-cells : must be 1 + - #size-cells : must be 0 + - pwms : The PWM bound to the FPGA + - ts,data-gpios : The 8 GPIO pins connected to the data lines on the FPGA + - ts,csn-gpios : The GPIO pin connected to the csn line on the FPGA + - ts,txrx-gpios : The GPIO pin connected to the txrx line on the FPGA + - ts,strobe-gpios : The GPIO pin connected to the stobe line on the FPGA + - ts,ale-gpios : The GPIO pin connected to the ale line on the FPGA + - ts,rdy-gpios : The GPIO pin connected to the rdy line on the FPGA + +Child nodes: + +The NBUS node can contain zero or more child nodes representing peripherals +on the bus. + +Example: + + nbus { + compatible = "technologic,ts-nbus"; + pinctrl-0 = <&nbus_pins>; + #address-cells = <1>; + #size-cells = <0>; + pwms = <&pwm 2 83>; + ts,data-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH + &gpio0 1 GPIO_ACTIVE_HIGH + &gpio0 2 GPIO_ACTIVE_HIGH + &gpio0 3 GPIO_ACTIVE_HIGH + &gpio0 4 GPIO_ACTIVE_HIGH + &gpio0 5 GPIO_ACTIVE_HIGH + &gpio0 6 GPIO_ACTIVE_HIGH + &gpio0 7 GPIO_ACTIVE_HIGH>; + ts,csn-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + ts,txrx-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + ts,strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + ts,ale-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + ts,rdy-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; + + watchdog@2a { + compatible = "..."; + + /* ... */ + }; + }; diff --git a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt index 27468119fd94..4cd81742038f 100644 --- a/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt +++ b/Documentation/devicetree/bindings/clock/arm-syscon-icst.txt @@ -59,7 +59,7 @@ syscon: syscon@10000000 { compatible = "syscon"; reg = <0x10000000 0x1000>; - oscclk0: osc0@0c { + oscclk0: osc0@c { compatible = "arm,syscon-icst307"; #clock-cells = <0>; lock-offset = <0x20>; diff --git a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt index f2c5f0e4a363..f8e4a93466cb 100644 --- a/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt +++ b/Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt @@ -137,6 +137,20 @@ These clock IDs are defined in: ch1_audio audiopll 2 BCM_CYGNUS_AUDIOPLL_CH1 ch2_audio audiopll 3 BCM_CYGNUS_AUDIOPLL_CH2 +Hurricane 2 +------ +PLL and leaf clock compatible strings for Hurricane 2 are: + "brcm,hr2-armpll" + +The following table defines the set of PLL/clock for Hurricane 2: + + Clock Source Index ID + --- ----- ----- --------- + crystal N/A N/A N/A + + armpll crystal N/A N/A + + Northstar and Northstar Plus ------ PLL and leaf clock compatible strings for Northstar and Northstar Plus are: diff --git a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt index 0c3d6015868d..6030afb10b5c 100644 --- a/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-exynos-audss.txt @@ -33,6 +33,12 @@ Required Properties: - clock-names: Aliases for the above clocks. They should be "pll_ref", "pll_in", "cdclk", "sclk_audio", and "sclk_pcm_in" respectively. +Optional Properties: + + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + The following is the list of clocks generated by the controller. Each clock is assigned an identifier and client nodes use this identifier to specify the clock which they consume. Some of the clocks are available only on a particular @@ -80,7 +86,7 @@ Example 3: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. -i2s0: i2s@03830000 { +i2s0: i2s@3830000 { compatible = "samsung,i2s-v5"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt index 4fc869b69d4a..f6272dcd96f4 100644 --- a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt +++ b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt @@ -43,7 +43,7 @@ Example: I2S controller node that consumes the clock generated by the clock controller. Refer to the standard clock bindings for information about 'clocks' and 'clock-names' property. - i2s0: i2s@03830000 { + i2s0: i2s@3830000 { /* ... */ clock-names = "iis", "i2s_opclk0", "i2s_opclk1"; diff --git a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt index e3eb0f657c5e..217871f483c0 100644 --- a/Documentation/devicetree/bindings/clock/dove-divider-clock.txt +++ b/Documentation/devicetree/bindings/clock/dove-divider-clock.txt @@ -21,7 +21,7 @@ Required properties: a size of 8. - #clock-cells : from common clock binding; shall be set to 1 -divider_clk: core-clock@0064 { +divider_clk: core-clock@64 { compatible = "marvell,dove-divider-clock"; reg = <0x0064 0x8>; #clock-cells = <1>; diff --git a/Documentation/devicetree/bindings/clock/exynos4-clock.txt b/Documentation/devicetree/bindings/clock/exynos4-clock.txt index f5a5b19ed3b2..bc61c952cb0b 100644 --- a/Documentation/devicetree/bindings/clock/exynos4-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos4-clock.txt @@ -41,3 +41,46 @@ Example 2: UART controller node that consumes the clock generated by the clock clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>; clock-names = "uart", "clk_uart_baud0"; }; + +Exynos4412 SoC contains some additional clocks for FIMC-ISP (Camera ISP) +subsystem. Registers for those clocks are located in the ISP power domain. +Because those registers are also located in a different memory region than +the main clock controller, a separate clock controller has to be defined for +handling them. + +Required Properties: + +- compatible: should be "samsung,exynos4412-isp-clock". + +- reg: physical base address of the ISP clock controller and length of memory + mapped region. + +- #clock-cells: should be 1. + +- clocks: list of the clock controller input clock identifiers, + from common clock bindings, should point to CLK_ACLK200 and + CLK_ACLK400_MCUISP clocks from the main clock controller. + +- clock-names: list of the clock controller input clock names, + as described in clock-bindings.txt, should be "aclk200" and + "aclk400_mcuisp". + +- power-domains: a phandle to ISP power domain node as described by + generic PM domain bindings. + +Example 3: The clock controllers bindings for Exynos4412 SoCs. + + clock: clock-controller@10030000 { + compatible = "samsung,exynos4412-clock"; + reg = <0x10030000 0x18000>; + #clock-cells = <1>; + }; + + isp_clock: clock-controller@10048000 { + compatible = "samsung,exynos4412-isp-clock"; + reg = <0x10048000 0x1000>; + #clock-cells = <1>; + power-domains = <&pd_isp>; + clocks = <&clock CLK_ACLK200>, <&clock CLK_ACLK400_MCUISP>; + clock-names = "aclk200", "aclk400_mcuisp"; + }; diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt index fe885abc9cb4..c473dd38dd55 100644 --- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt +++ b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt @@ -168,6 +168,11 @@ Required Properties: - aclk_cam1_400 - aclk_cam1_552 +Optional properties: + - power-domains: a phandle to respective power domain node as described by + generic PM domain bindings (see power/power_domain.txt for more + information). + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. @@ -270,6 +275,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_G2D_266>, <&cmu_top CLK_ACLK_G2D_400>; + power-domains = <&pd_g2d>; }; cmu_disp: clock-controller@13b90000 { @@ -295,6 +301,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>, <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>, <&cmu_mif CLK_ACLK_DISP_333>; + power-domains = <&pd_disp>; }; cmu_aud: clock-controller@114c0000 { @@ -304,6 +311,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "fout_aud_pll"; clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>; + power-domains = <&pd_aud>; }; cmu_bus0: clock-controller@13600000 { @@ -340,6 +348,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_g3d_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>; + power-domains = <&pd_g3d>; }; cmu_gscl: clock-controller@13cf0000 { @@ -353,6 +362,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_GSCL_111>, <&cmu_top CLK_ACLK_GSCL_333>; + power-domains = <&pd_gscl>; }; cmu_apollo: clock-controller@11900000 { @@ -384,6 +394,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_SCLK_JPEG_MSCL>, <&cmu_top CLK_ACLK_MSCL_400>; + power-domains = <&pd_mscl>; }; cmu_mfc: clock-controller@15280000 { @@ -393,6 +404,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_mfc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>; + power-domains = <&pd_mfc>; }; cmu_hevc: clock-controller@14f80000 { @@ -402,6 +414,7 @@ Example 2: Examples of clock controller nodes are listed below. clock-names = "oscclk", "aclk_hevc_400"; clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>; + power-domains = <&pd_hevc>; }; cmu_isp: clock-controller@146d0000 { @@ -415,6 +428,7 @@ Example 2: Examples of clock controller nodes are listed below. clocks = <&xxti>, <&cmu_top CLK_ACLK_ISP_DIS_400>, <&cmu_top CLK_ACLK_ISP_400>; + power-domains = <&pd_isp>; }; cmu_cam0: clock-controller@120d0000 { @@ -430,6 +444,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM0_333>, <&cmu_top CLK_ACLK_CAM0_400>, <&cmu_top CLK_ACLK_CAM0_552>; + power-domains = <&pd_cam0>; }; cmu_cam1: clock-controller@145d0000 { @@ -451,6 +466,7 @@ Example 2: Examples of clock controller nodes are listed below. <&cmu_top CLK_ACLK_CAM1_333>, <&cmu_top CLK_ACLK_CAM1_400>, <&cmu_top CLK_ACLK_CAM1_552>; + power-domains = <&pd_cam1>; }; Example 3: UART controller node that consumes the clock generated by the clock diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt index b7adf4e3ea98..9823baf7acb6 100644 --- a/Documentation/devicetree/bindings/clock/imx1-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt @@ -10,13 +10,13 @@ ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h for the full list of i.MX1 clock IDs. Examples: - clks: ccm@0021b000 { + clks: ccm@21b000 { #clock-cells = <1>; compatible = "fsl,imx1-ccm"; reg = <0x0021b000 0x1000>; }; - pwm: pwm@00208000 { + pwm: pwm@208000 { #pwm-cells = <2>; compatible = "fsl,imx1-pwm"; reg = <0x00208000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index aa0a4d423ef5..a45ca67a9d5f 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -14,14 +14,14 @@ Examples: #include <dt-bindings/clock/imx6qdl-clock.h> -clks: ccm@020c4000 { +clks: ccm@20c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; #clock-cells = <1>; }; -uart1: serial@02020000 { +uart1: serial@2020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; diff --git a/Documentation/devicetree/bindings/clock/maxim,max77686.txt b/Documentation/devicetree/bindings/clock/maxim,max77686.txt index 8398a3a5e106..3472b461ca93 100644 --- a/Documentation/devicetree/bindings/clock/maxim,max77686.txt +++ b/Documentation/devicetree/bindings/clock/maxim,max77686.txt @@ -46,7 +46,7 @@ Example: /* ... */ Node of the MFD chip - max77686: max77686@09 { + max77686: max77686@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; @@ -71,7 +71,7 @@ Example: /* ... */ Node of the MFD chip - max77802: max77802@09 { + max77802: max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index a7235e9e1c97..4491d1c104aa 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -10,12 +10,23 @@ Required properties : - compatible : shall contain only one of the following. The generic compatible "qcom,rpmcc" should be also included. + "qcom,rpmcc-msm8660", "qcom,rpmcc" + "qcom,rpmcc-apq8060", "qcom,rpmcc" "qcom,rpmcc-msm8916", "qcom,rpmcc" "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" + "qcom,rpmcc-msm8996", "qcom,rpmcc" - #clock-cells : shall contain 1 +The clock enumerators are defined in <dt-bindings/clock/qcom,rpmcc.h> +and come in pairs: FOO_CLK followed by FOO_A_CLK. The latter clock +is an "active" clock, which means that the consumer only care that the +clock is available when the apps CPU subsystem is active, i.e. not +suspended or in deep idle. If it is important that the clock keeps running +during system suspend, you need to specify the non-active clock, the one +not containing *_A_* in the enumerator name. + Example: smd { compatible = "qcom,smd"; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index 316e13686568..f1890d0777a6 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -22,6 +22,7 @@ Required Properties: - "renesas,r8a7794-cpg-mssr" for the r8a7794 SoC (R-Car E2) - "renesas,r8a7795-cpg-mssr" for the r8a7795 SoC (R-Car H3) - "renesas,r8a7796-cpg-mssr" for the r8a7796 SoC (R-Car M3-W) + - "renesas,r8a77970-cpg-mssr" for the r8a77970 SoC (R-Car V3M) - "renesas,r8a77995-cpg-mssr" for the r8a77995 SoC (R-Car D3) - reg: Base address and length of the memory resource used by the CPG/MSSR @@ -31,8 +32,8 @@ Required Properties: clock-names - clock-names: List of external parent clock names. Valid names are: - "extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7792, r8a7793, r8a7794, - r8a7795, r8a7796, r8a77995) - - "extalr" (r8a7795, r8a7796) + r8a7795, r8a7796, r8a77970, r8a77995) + - "extalr" (r8a7795, r8a7796, r8a77970) - "usb_extal" (r8a7743, r8a7745, r8a7790, r8a7791, r8a7793, r8a7794) - #clock-cells: Must be 2 diff --git a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt index bb5d942075fb..8ff3e2774ed8 100644 --- a/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt +++ b/Documentation/devicetree/bindings/clock/renesas,rz-cpg-clocks.txt @@ -1,6 +1,6 @@ -* Renesas RZ Clock Pulse Generator (CPG) +* Renesas RZ/A1 Clock Pulse Generator (CPG) -The CPG generates core clocks for the RZ SoCs. It includes the PLL, variable +The CPG generates core clocks for the RZ/A1 SoCs. It includes the PLL, variable CPU and GPU clocks, and several fixed ratio dividers. The CPG also provides a Clock Domain for SoC devices, in combination with the CPG Module Stop (MSTP) Clocks. diff --git a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt index a135504c7d57..cac24ee10b72 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32h7-rcc.txt @@ -32,7 +32,7 @@ Example: compatible = "st,stm32h743-rcc", "st,stm32-rcc"; reg = <0x58024400 0x400>; #reset-cells = <1>; - #clock-cells = <2>; + #clock-cells = <1>; clocks = <&clk_hse>, <&clk_lse>, <&clk_i2s_ckin>; st,syscfg = <&pwrcfg>; diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt index c35390f60545..7364953d0d0b 100644 --- a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt +++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt @@ -42,7 +42,7 @@ Required properties: Example: - clockgen-a@090ff000 { + clockgen-a@90ff000 { compatible = "st,clkgen-c32"; reg = <0x90ff000 0x1000>; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 7eda08eb8a1e..4ca21c3a6fc9 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -36,7 +36,7 @@ For the PRCM CCUs on A83T/H3/A64, two more clocks are needed: - "iosc": the SoC's internal frequency oscillator Example for generic CCU: -ccu: clock@01c20000 { +ccu: clock@1c20000 { compatible = "allwinner,sun8i-h3-ccu"; reg = <0x01c20000 0x400>; clocks = <&osc24M>, <&osc32k>; @@ -46,7 +46,7 @@ ccu: clock@01c20000 { }; Example for PRCM CCU: -r_ccu: clock@01f01400 { +r_ccu: clock@1f01400 { compatible = "allwinner,sun50i-a64-r-ccu"; reg = <0x01f01400 0x100>; clocks = <&osc24M>, <&osc32k>, <&iosc>, <&ccu CLK_PLL_PERIPH0>; diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt index 8f7619d8c8d8..1a042e20b115 100644 --- a/Documentation/devicetree/bindings/clock/sunxi.txt +++ b/Documentation/devicetree/bindings/clock/sunxi.txt @@ -137,7 +137,7 @@ the address block, which is related to the overall mmc block. For example: -osc24M: clk@01c20050 { +osc24M: clk@1c20050 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-osc-clk"; reg = <0x01c20050 0x4>; @@ -145,7 +145,7 @@ osc24M: clk@01c20050 { clock-output-names = "osc24M"; }; -pll1: clk@01c20000 { +pll1: clk@1c20000 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-pll1-clk"; reg = <0x01c20000 0x4>; @@ -153,7 +153,7 @@ pll1: clk@01c20000 { clock-output-names = "pll1"; }; -pll5: clk@01c20020 { +pll5: clk@1c20020 { #clock-cells = <1>; compatible = "allwinner,sun4i-pll5-clk"; reg = <0x01c20020 0x4>; @@ -161,7 +161,7 @@ pll5: clk@01c20020 { clock-output-names = "pll5_ddr", "pll5_other"; }; -pll6: clk@01c20028 { +pll6: clk@1c20028 { #clock-cells = <1>; compatible = "allwinner,sun6i-a31-pll6-clk"; reg = <0x01c20028 0x4>; @@ -169,7 +169,7 @@ pll6: clk@01c20028 { clock-output-names = "pll6", "pll6x2"; }; -cpu: cpu@01c20054 { +cpu: cpu@1c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-a10-cpu-clk"; reg = <0x01c20054 0x4>; @@ -177,7 +177,7 @@ cpu: cpu@01c20054 { clock-output-names = "cpu"; }; -mmc0_clk: clk@01c20088 { +mmc0_clk: clk@1c20088 { #clock-cells = <1>; compatible = "allwinner,sun4i-a10-mmc-clk"; reg = <0x01c20088 0x4>; @@ -199,7 +199,7 @@ gmac_int_tx_clk: clk@3 { clock-output-names = "gmac_int_tx"; }; -gmac_clk: clk@01c20164 { +gmac_clk: clk@1c20164 { #clock-cells = <0>; compatible = "allwinner,sun7i-a20-gmac-clk"; reg = <0x01c20164 0x4>; @@ -211,7 +211,7 @@ gmac_clk: clk@01c20164 { clock-output-names = "gmac"; }; -mmc_config_clk: clk@01c13000 { +mmc_config_clk: clk@1c13000 { compatible = "allwinner,sun9i-a80-mmc-config-clk"; reg = <0x01c13000 0x10>; clocks = <&ahb0_gates 8>; diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt index 616836e7e1e2..959d96632f5d 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce706.txt +++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt @@ -25,7 +25,7 @@ Example: }; }; ... - i2c0: i2c-master@0d090000 { + i2c0: i2c-master@d090000 { ... cdce706: clock-synth@69 { compatible = "ti,cdce706"; diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt index 697714f8d75c..a3448bfa1c82 100644 --- a/Documentation/devicetree/bindings/common-properties.txt +++ b/Documentation/devicetree/bindings/common-properties.txt @@ -1,4 +1,8 @@ Common properties +================= + +Endianness +---------- The Devicetree Specification does not define any properties related to hardware byteswapping, but endianness issues show up frequently in porting Linux to @@ -58,3 +62,25 @@ dev: dev@40031000 { ... little-endian; }; + +Daisy-chained devices +--------------------- + +Many serially-attached GPIO and IIO devices are daisy-chainable. To the +host controller, a daisy-chain appears as a single device, but the number +of inputs and outputs it provides is the sum of inputs and outputs provided +by all of its devices. The driver needs to know how many devices the +daisy-chain comprises to determine the amount of data exchanged, how many +inputs and outputs to register and so on. + +Optional properties: + - #daisy-chained-devices: Number of devices in the daisy-chain (default is 1). + +Example: +gpio@0 { + compatible = "name"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + #daisy-chained-devices = <3>; +}; diff --git a/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt index 4ca8dd4d7e66..4ca8dd4d7e66 100644 --- a/Documentation/devicetree/bindings/rng/samsung,exynos-rng4.txt +++ b/Documentation/devicetree/bindings/crypto/samsung,exynos-rng4.txt diff --git a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt index 5d38e9b7033f..f2dc3d9bca92 100644 --- a/Documentation/devicetree/bindings/crypto/sun4i-ss.txt +++ b/Documentation/devicetree/bindings/crypto/sun4i-ss.txt @@ -14,7 +14,7 @@ Optional properties: - reset-names : must contain "ahb" Example: - crypto: crypto-engine@01c15000 { + crypto: crypto-engine@1c15000 { compatible = "allwinner,sun4i-a10-crypto"; reg = <0x01c15000 0x1000>; interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 06668bca7ffc..0047b1394c70 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -68,6 +68,8 @@ Optional properties: - adi,disable-timing-generator: Only for ADV7533. Disables the internal timing generator. The chip will rely on the sync signals in the DSI data lanes, rather than generate its own timings for HDMI output. +- clocks: from common clock binding: reference to the CEC clock. +- clock-names: from common clock binding: must be "cec". Required nodes: @@ -89,6 +91,8 @@ Example reg = <39>; interrupt-parent = <&gpio3>; interrupts = <29 IRQ_TYPE_EDGE_FALLING>; + clocks = <&cec_clock>; + clock-names = "cec"; adi,input-depth = <8>; adi,input-colorspace = "rgb"; diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt index b1a8929c2536..3a72a103a18a 100644 --- a/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/renesas,dw-hdmi.txt @@ -37,7 +37,7 @@ Optional properties: Example: - hdmi0: hdmi0@fead0000 { + hdmi0: hdmi@fead0000 { compatible = "renesas,r8a7795-dw-hdmi"; reg = <0 0xfead0000 0 0x10000>; interrupts = <0 389 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt b/Documentation/devicetree/bindings/display/bridge/sii9234.txt new file mode 100644 index 000000000000..88041ba23d56 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt @@ -0,0 +1,49 @@ +Silicon Image SiI9234 HDMI/MHL bridge bindings + +Required properties: + - compatible : "sil,sii9234". + - reg : I2C address for TPI interface, use 0x39 + - avcc33-supply : MHL/USB Switch Supply Voltage (3.3V) + - iovcc18-supply : I/O Supply Voltage (1.8V) + - avcc12-supply : TMDS Analog Supply Voltage (1.2V) + - cvcc12-supply : Digital Core Supply Voltage (1.2V) + - interrupts, interrupt-parent: interrupt specifier of INT pin + - reset-gpios: gpio specifier of RESET pin (active low) + - video interfaces: Device node can contain two video interface port + nodes for HDMI encoder and connector according to [1]. + - port@0 - MHL to HDMI + - port@1 - MHL to connector + +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt + + +Example: + sii9234@39 { + compatible = "sil,sii9234"; + reg = <0x39>; + avcc33-supply = <&vcc33mhl>; + iovcc18-supply = <&vcc18mhl>; + avcc12-supply = <&vsil12>; + cvcc12-supply = <&vsil12>; + reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpf3>; + interrupts = <5 IRQ_TYPE_LEVEL_HIGH>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + mhl_to_hdmi: endpoint { + remote-endpoint = <&hdmi_to_mhl>; + }; + }; + port@1 { + reg = <1>; + mhl_to_connector: endpoint { + remote-endpoint = <&connector_to_mhl>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt index ed5e0a7894ad..05176f1ae108 100644 --- a/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt +++ b/Documentation/devicetree/bindings/display/etnaviv/etnaviv-drm.txt @@ -42,7 +42,7 @@ Optional properties: example: -gpu_3d: gpu@00130000 { +gpu_3d: gpu@130000 { compatible = "vivante,gc"; reg = <0x00130000 0x4000>; interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/display/faraday,tve200.txt b/Documentation/devicetree/bindings/display/faraday,tve200.txt new file mode 100644 index 000000000000..82e3bc0b7485 --- /dev/null +++ b/Documentation/devicetree/bindings/display/faraday,tve200.txt @@ -0,0 +1,54 @@ +* Faraday TV Encoder TVE200 + +Required properties: + +- compatible: must be one of: + "faraday,tve200" + "cortina,gemini-tvc", "faraday,tve200" + +- reg: base address and size of the control registers block + +- interrupts: contains an interrupt specifier for the interrupt + line from the TVE200 + +- clock-names: should contain "PCLK" for the clock line clocking the + silicon and "TVE" for the 27MHz clock to the video driver + +- clocks: contains phandle and clock specifier pairs for the entries + in the clock-names property. See + Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional properties: + +- resets: contains the reset line phandle for the block + +Required sub-nodes: + +- port: describes LCD panel signals, following the common binding + for video transmitter interfaces; see + Documentation/devicetree/bindings/media/video-interfaces.txt + This port should have the properties: + reg = <0>; + It should have one endpoint connected to a remote endpoint where + the display is connected. + +Example: + +display-controller@6a000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "faraday,tve200"; + reg = <0x6a000000 0x1000>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; + resets = <&syscon GEMINI_RESET_TVC>; + clocks = <&syscon GEMINI_CLK_GATE_TVC>, + <&syscon GEMINI_CLK_TVC>; + clock-names = "PCLK", "TVE"; + + port@0 { + reg = <0>; + display_out: endpoint { + remote-endpoint = <&panel_in>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/google,goldfish-fb.txt b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt new file mode 100644 index 000000000000..751fa9f51e5d --- /dev/null +++ b/Documentation/devicetree/bindings/display/google,goldfish-fb.txt @@ -0,0 +1,17 @@ +Android Goldfish framebuffer + +Android Goldfish framebuffer device used by Android emulator. + +Required properties: + +- compatible : should contain "google,goldfish-fb" +- reg : <registers mapping> +- interrupts : <interrupt mapping> + +Example: + + display-controller@1f008000 { + compatible = "google,goldfish-fb"; + interrupts = <0x10>; + reg = <0x1f008000 0x100>; + }; diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt index 66a8f86e5d12..6d021e71c9cf 100644 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt @@ -32,11 +32,11 @@ Optional properties Example: - gpr: iomuxc-gpr@020e0000 { + gpr: iomuxc-gpr@20e0000 { /* ... */ }; - hdmi: hdmi@0120000 { + hdmi: hdmi@120000 { #address-cells = <1>; #size-cells = <0>; compatible = "fsl,imx6q-hdmi"; diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt index fa00e62e1cf6..a6671bd2c85a 100644 --- a/Documentation/devicetree/bindings/display/msm/dsi.txt +++ b/Documentation/devicetree/bindings/display/msm/dsi.txt @@ -13,16 +13,16 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. - clock-names: the following clocks are required: - * "mdp_core_clk" - * "iface_clk" - * "bus_clk" - * "core_mmss_clk" - * "byte_clk" - * "pixel_clk" - * "core_clk" + * "mdp_core" + * "iface" + * "bus" + * "core_mmss" + * "byte" + * "pixel" + * "core" For DSIv2, we need an additional clock: - * "src_clk" -- assigned-clocks: Parents of "byte_clk" and "pixel_clk" for the given platform. + * "src" +- assigned-clocks: Parents of "byte" and "pixel" for the given platform. - assigned-clock-parents: The Byte clock and Pixel clock PLL outputs provided by a DSI PHY block. See [1] for details on clock bindings. - vdd-supply: phandle to vdd regulator device node @@ -101,7 +101,7 @@ Required properties: - power-domains: Should be <&mmcc MDSS_GDSC>. - clocks: Phandles to device clocks. See [1] for details on clock bindings. - clock-names: the following clocks are required: - * "iface_clk" + * "iface" - vddio-supply: phandle to vdd-io regulator device node Optional properties: @@ -123,13 +123,13 @@ Example: reg = <0xfd922800 0x200>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "bus_clk", - "byte_clk", - "core_clk", - "core_mmss_clk", - "iface_clk", - "mdp_core_clk", - "pixel_clk"; + "bus", + "byte", + "core", + "core_mmss", + "iface", + "mdp_core", + "pixel"; clocks = <&mmcc MDSS_AXI_CLK>, <&mmcc MDSS_BYTE0_CLK>, @@ -207,7 +207,7 @@ Example: reg = <0xfd922a00 0xd4>, <0xfd922b00 0x2b0>, <0xfd922d80 0x7b>; - clock-names = "iface_clk"; + clock-names = "iface"; clocks = <&mmcc MDSS_AHB_CLK>; #clock-cells = <1>; vddio-supply = <&pma8084_l12>; diff --git a/Documentation/devicetree/bindings/display/msm/edp.txt b/Documentation/devicetree/bindings/display/msm/edp.txt index e63032be5401..95ce19ca7bc5 100644 --- a/Documentation/devicetree/bindings/display/msm/edp.txt +++ b/Documentation/devicetree/bindings/display/msm/edp.txt @@ -12,11 +12,11 @@ Required properties: - clocks: device clocks See Documentation/devicetree/bindings/clock/clock-bindings.txt for details. - clock-names: the following clocks are required: - * "core_clk" - * "iface_clk" - * "mdp_core_clk" - * "pixel_clk" - * "link_clk" + * "core" + * "iface" + * "mdp_core" + * "pixel" + * "link" - #clock-cells: The value should be 1. - vdda-supply: phandle to vdda regulator device node - lvl-vdd-supply: phandle to regulator device node which is used to supply power @@ -41,11 +41,11 @@ Example: interrupts = <12 0>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "core_clk", - "pixel_clk", - "iface_clk", - "link_clk", - "mdp_core_clk"; + "core", + "pixel", + "iface", + "link", + "mdp_core"; clocks = <&mmcc MDSS_EDPAUX_CLK>, <&mmcc MDSS_EDPPIXEL_CLK>, diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt index 2d306f402d18..5f90a40da51b 100644 --- a/Documentation/devicetree/bindings/display/msm/hdmi.txt +++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt @@ -64,9 +64,9 @@ Example: interrupts = <GIC_SPI 79 0>; power-domains = <&mmcc MDSS_GDSC>; clock-names = - "core_clk", - "master_iface_clk", - "slave_iface_clk"; + "core", + "master_iface", + "slave_iface"; clocks = <&mmcc HDMI_APP_CLK>, <&mmcc HDMI_M_AHB_CLK>, @@ -92,7 +92,7 @@ Example: <0x4a00500 0x100>; #phy-cells = <0>; power-domains = <&mmcc MDSS_GDSC>; - clock-names = "slave_iface_clk"; + clock-names = "slave_iface"; clocks = <&mmcc HDMI_S_AHB_CLK>; core-vdda-supply = <&pm8921_hdmi_mvs>; }; diff --git a/Documentation/devicetree/bindings/display/msm/mdp5.txt b/Documentation/devicetree/bindings/display/msm/mdp5.txt index 30c11ea83754..1b31977a68ba 100644 --- a/Documentation/devicetree/bindings/display/msm/mdp5.txt +++ b/Documentation/devicetree/bindings/display/msm/mdp5.txt @@ -22,16 +22,16 @@ Required properties: Documentation/devicetree/bindings/power/power_domain.txt - clocks: device clocks. See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required. - * "iface_clk" - * "bus_clk" - * "vsync_clk" + * "iface" + * "bus" + * "vsync" - #address-cells: number of address cells for the MDSS children. Should be 1. - #size-cells: Should be 1. - ranges: parent bus address space is the same as the child bus address space. Optional properties: - clock-names: the following clocks are optional: - * "lut_clk" + * "lut" MDP5: Required properties: @@ -45,10 +45,10 @@ Required properties: through MDP block - clocks: device clocks. See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required. -- * "bus_clk" -- * "iface_clk" -- * "core_clk" -- * "vsync_clk" +- * "bus" +- * "iface" +- * "core" +- * "vsync" - ports: contains the list of output ports from MDP. These connect to interfaces that are external to the MDP hardware, such as HDMI, DSI, EDP etc (LVDS is a special case since it is a part of the MDP block itself). @@ -77,7 +77,7 @@ Required properties: Optional properties: - clock-names: the following clocks are optional: - * "lut_clk" + * "lut" Example: @@ -95,9 +95,9 @@ Example: clocks = <&gcc GCC_MDSS_AHB_CLK>, <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "vsync_clk" + clock-names = "iface", + "bus", + "vsync" interrupts = <0 72 0>; @@ -120,10 +120,10 @@ Example: <&gcc GCC_MDSS_AXI_CLK>, <&gcc GCC_MDSS_MDP_CLK>, <&gcc GCC_MDSS_VSYNC_CLK>; - clock-names = "iface_clk", - "bus_clk", - "core_clk", - "vsync_clk"; + clock-names = "iface", + "bus", + "core", + "vsync"; ports { #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt new file mode 100644 index 000000000000..6862028e7b2e --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/orisetech,otm8009a.txt @@ -0,0 +1,21 @@ +Orise Tech OTM8009A 3.97" 480x800 TFT LCD panel (MIPI-DSI video mode) + +The Orise Tech OTM8009A is a 3.97" 480x800 TFT LCD panel connected using +a MIPI-DSI video interface. Its backlight is managed through the DSI link. + +Required properties: + - compatible: "orisetech,otm8009a" + - reg: the virtual channel number of a DSI peripheral + +Optional properties: + - reset-gpios: a GPIO spec for the reset pin (active low). + +Example: +&dsi { + ... + panel@0 { + compatible = "orisetech,otm8009a"; + reg = <0>; + reset-gpios = <&gpioh 7 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 000000000000..e9e19c059260 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt new file mode 100644 index 000000000000..3f1a8392af7f --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e63j0x03.txt @@ -0,0 +1,24 @@ +Samsung S6E63J0X03 1.63" 320x320 AMOLED panel (interface: MIPI-DSI command mode) + +Required properties: + - compatible: "samsung,s6e63j0x03" + - reg: the virtual channel number of a DSI peripheral + - vdd3-supply: I/O voltage supply + - vci-supply: voltage supply for analog circuits + - reset-gpios: a GPIO spec for the reset pin (active low) + - te-gpios: a GPIO spec for the tearing effect synchronization signal + gpio pin (active high) + +Example: +&dsi { + ... + + panel@0 { + compatible = "samsung,s6e63j0x03"; + reg = <0>; + vdd3-supply = <&ldo16_reg>; + vci-supply = <&ldo20_reg>; + reset-gpios = <&gpe0 1 GPIO_ACTIVE_LOW>; + te-gpios = <&gpx0 6 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt new file mode 100644 index 000000000000..aae57ef36cdd --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/seiko,43wvf1g.txt @@ -0,0 +1,23 @@ +Seiko Instruments Inc. 4.3" WVGA (800 x RGB x 480) TFT with Touch-Panel + +Required properties: +- compatible: should be "sii,43wvf1g". +- "dvdd-supply": 3v3 digital regulator. +- "avdd-supply": 5v analog regulator. + +Optional properties: +- backlight: phandle for the backlight control. + +Example: + + panel { + compatible = "sii,43wvf1g"; + backlight = <&backlight_display>; + dvdd-supply = <®_lcd_3v3>; + avdd-supply = <®_lcd_5v>; + port { + panel_in: endpoint { + remote-endpoint = <&display_out>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt new file mode 100644 index 000000000000..4c0caaf246c9 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/toshiba,lt089ac29000.txt @@ -0,0 +1,8 @@ +Toshiba 8.9" WXGA (1280x768) TFT LCD panel + +Required properties: +- compatible: should be "toshiba,lt089ac29000.txt" +- power-supply: as specified in the base binding + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt new file mode 100644 index 000000000000..da6939efdb43 --- /dev/null +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-lvds.txt @@ -0,0 +1,99 @@ +Rockchip RK3288 LVDS interface +================================ + +Required properties: +- compatible: matching the soc type, one of + - "rockchip,rk3288-lvds"; + +- reg: physical base address of the controller and length + of memory mapped region. +- clocks: must include clock specifiers corresponding to entries in the + clock-names property. +- clock-names: must contain "pclk_lvds" + +- avdd1v0-supply: regulator phandle for 1.0V analog power +- avdd1v8-supply: regulator phandle for 1.8V analog power +- avdd3v3-supply: regulator phandle for 3.3V analog power + +- rockchip,grf: phandle to the general register files syscon +- rockchip,output: "rgb", "lvds" or "duallvds", This describes the output interface + +Optional properties: +- pinctrl-names: must contain a "lcdc" entry. +- pinctrl-0: pin control group to be used for this controller. + +Required nodes: + +The lvds has two video ports as described by + Documentation/devicetree/bindings/media/video-interfaces.txt +Their connections are modeled using the OF graph bindings specified in + Documentation/devicetree/bindings/graph.txt. + +- video port 0 for the VOP input, the remote endpoint maybe vopb or vopl +- video port 1 for either a panel or subsequent encoder + +the lvds panel described by + Documentation/devicetree/bindings/display/panel/simple-panel.txt + +Panel required properties: +- ports for remote LVDS output + +Panel optional properties: +- data-mapping: should be "vesa-24","jeida-24" or "jeida-18". +This describes decribed by: + Documentation/devicetree/bindings/display/panel/panel-lvds.txt + +Example: + +lvds_panel: lvds-panel { + compatible = "auo,b101ean01"; + enable-gpios = <&gpio7 21 GPIO_ACTIVE_HIGH>; + data-mapping = "jeida-24"; + + ports { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; +}; + +For Rockchip RK3288: + + lvds: lvds@ff96c000 { + compatible = "rockchip,rk3288-lvds"; + rockchip,grf = <&grf>; + reg = <0xff96c000 0x4000>; + clocks = <&cru PCLK_LVDS_PHY>; + clock-names = "pclk_lvds"; + pinctrl-names = "lcdc"; + pinctrl-0 = <&lcdc_ctl>; + avdd1v0-supply = <&vdd10_lcd>; + avdd1v8-supply = <&vcc18_lcd>; + avdd3v3-supply = <&vcca_33>; + rockchip,output = "rgb"; + ports { + #address-cells = <1>; + #size-cells = <0>; + + lvds_in: port@0 { + reg = <0>; + + lvds_in_vopb: endpoint@0 { + reg = <0>; + remote-endpoint = <&vopb_out_lvds>; + }; + lvds_in_vopl: endpoint@1 { + reg = <1>; + remote-endpoint = <&vopl_out_lvds>; + }; + }; + + lvds_out: port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/display/simple-framebuffer.txt b/Documentation/devicetree/bindings/display/simple-framebuffer.txt index 8c9e9f515c87..5a9ce511be88 100644 --- a/Documentation/devicetree/bindings/display/simple-framebuffer.txt +++ b/Documentation/devicetree/bindings/display/simple-framebuffer.txt @@ -78,7 +78,7 @@ chosen { stdout-path = "display0"; }; -soc@01c00000 { +soc@1c00000 { lcdc0: lcdc@1c0c000 { compatible = "allwinner,sun4i-a10-lcdc"; ... diff --git a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt index 92441086caba..50cc72ee1168 100644 --- a/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt +++ b/Documentation/devicetree/bindings/display/sunxi/sun4i-drm.txt @@ -40,15 +40,19 @@ CEC. It is one end of the pipeline. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-hdmi * allwinner,sun5i-a10s-hdmi + * allwinner,sun6i-a31-hdmi - reg: base address and size of memory-mapped region - interrupts: interrupt associated to this IP - clocks: phandles to the clocks feeding the HDMI encoder * ahb: the HDMI interface clock * mod: the HDMI module clock + * ddc: the HDMI ddc clock (A31 only) * pll-0: the first video PLL * pll-1: the second video PLL - clock-names: the clock names mentioned above + - resets: phandle to the reset control for the HDMI encoder (A31 only) - dmas: phandles to the DMA channels used by the HDMI encoder * ddc-tx: The channel for DDC transmission * ddc-rx: The channel for DDC reception @@ -83,9 +87,11 @@ The TCON acts as a timing controller for RGB, LVDS and TV interfaces. Required properties: - compatible: value must be either: + * allwinner,sun4i-a10-tcon * allwinner,sun5i-a13-tcon * allwinner,sun6i-a31-tcon * allwinner,sun6i-a31s-tcon + * allwinner,sun7i-a20-tcon * allwinner,sun8i-a33-tcon * allwinner,sun8i-v3s-tcon - reg: base address and size of memory-mapped region @@ -150,8 +156,10 @@ system. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-backend * allwinner,sun5i-a13-display-backend * allwinner,sun6i-a31-display-backend + * allwinner,sun7i-a20-display-backend * allwinner,sun8i-a33-display-backend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -182,8 +190,10 @@ deinterlacing and color space conversion. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-frontend * allwinner,sun5i-a13-display-frontend * allwinner,sun6i-a31-display-frontend + * allwinner,sun7i-a20-display-frontend * allwinner,sun8i-a33-display-frontend - reg: base address and size of the memory-mapped region. - interrupts: interrupt associated to this IP @@ -228,10 +238,12 @@ extra node. Required properties: - compatible: value must be one of: + * allwinner,sun4i-a10-display-engine * allwinner,sun5i-a10s-display-engine * allwinner,sun5i-a13-display-engine * allwinner,sun6i-a31-display-engine * allwinner,sun6i-a31s-display-engine + * allwinner,sun7i-a20-display-engine * allwinner,sun8i-a33-display-engine * allwinner,sun8i-v3s-display-engine @@ -266,7 +278,7 @@ connector { }; }; -hdmi: hdmi@01c16000 { +hdmi: hdmi@1c16000 { compatible = "allwinner,sun5i-a10s-hdmi"; reg = <0x01c16000 0x1000>; interrupts = <58>; @@ -305,7 +317,7 @@ hdmi: hdmi@01c16000 { }; }; -tve0: tv-encoder@01c0a000 { +tve0: tv-encoder@1c0a000 { compatible = "allwinner,sun4i-a10-tv-encoder"; reg = <0x01c0a000 0x1000>; clocks = <&ahb_gates 34>; diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt index 74e1e8add5a1..844e0103fb0d 100644 --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt @@ -3,6 +3,10 @@ NVIDIA Tegra host1x Required properties: - compatible: "nvidia,tegra<chip>-host1x" - reg: Physical base address and length of the controller's registers. + For pre-Tegra186, one entry describing the whole register area. + For Tegra186, one entry for each entry in reg-names: + "vm" - VM region assigned to Linux + "hypervisor" - Hypervisor region (only if Linux acts as hypervisor) - interrupts: The interrupt outputs from the controller. - #address-cells: The number of cells used to represent physical base addresses in the host1x address space. Should be 1. diff --git a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt index 1be6941ac1e5..f3d1f151ba80 100644 --- a/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt +++ b/Documentation/devicetree/bindings/dma/renesas,usb-dmac.txt @@ -3,6 +3,8 @@ Required Properties: -compatible: "renesas,<soctype>-usb-dmac", "renesas,usb-dmac" as fallback. Examples with soctypes are: + - "renesas,r8a7743-usb-dmac" (RZ/G1M) + - "renesas,r8a7745-usb-dmac" (RZ/G1E) - "renesas,r8a7790-usb-dmac" (R-Car H2) - "renesas,r8a7791-usb-dmac" (R-Car M2-W) - "renesas,r8a7793-usb-dmac" (R-Car M2-N) diff --git a/Documentation/devicetree/bindings/dma/sprd-dma.txt b/Documentation/devicetree/bindings/dma/sprd-dma.txt new file mode 100644 index 000000000000..7a10fea2e51b --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sprd-dma.txt @@ -0,0 +1,41 @@ +* Spreadtrum DMA controller + +This binding follows the generic DMA bindings defined in dma.txt. + +Required properties: +- compatible: Should be "sprd,sc9860-dma". +- reg: Should contain DMA registers location and length. +- interrupts: Should contain one interrupt shared by all channel. +- #dma-cells: must be <1>. Used to represent the number of integer + cells in the dmas property of client device. +- #dma-channels : Number of DMA channels supported. Should be 32. +- clock-names: Should contain the clock of the DMA controller. +- clocks: Should contain a clock specifier for each entry in clock-names. + +Example: + +Controller: +apdma: dma-controller@20100000 { + compatible = "sprd,sc9860-dma"; + reg = <0x20100000 0x4000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + #dma-channels = <32>; + clock-names = "enable"; + clocks = <&clk_ap_ahb_gates 5>; +}; + + +Client: +DMA clients connected to the Spreadtrum DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each channel. +The two cells in order are: +1. A phandle pointing to the DMA controller. +2. The channel id. + +spi0: spi@70a00000{ + ... + dma-names = "rx_chn", "tx_chn"; + dmas = <&apdma 11>, <&apdma 12>; + ... +}; diff --git a/Documentation/devicetree/bindings/dma/stm32-dma.txt b/Documentation/devicetree/bindings/dma/stm32-dma.txt index 4408af693d0c..0b55718bf889 100644 --- a/Documentation/devicetree/bindings/dma/stm32-dma.txt +++ b/Documentation/devicetree/bindings/dma/stm32-dma.txt @@ -13,6 +13,7 @@ Required properties: - #dma-cells : Must be <4>. See DMA client paragraph for more details. Optional properties: +- dma-requests : Number of DMA requests supported. - resets: Reference to a reset controller asserting the DMA controller - st,mem2mem: boolean; if defined, it indicates that the controller supports memory-to-memory transfer @@ -34,12 +35,13 @@ Example: #dma-cells = <4>; st,mem2mem; resets = <&rcc 150>; + dma-requests = <8>; }; * DMA client DMA clients connected to the STM32 DMA controller must use the format -described in the dma.txt file, using a five-cell specifier for each +described in the dma.txt file, using a four-cell specifier for each channel: a phandle to the DMA controller plus the following four integer cells: 1. The channel id @@ -71,7 +73,7 @@ channel: a phandle to the DMA controller plus the following four integer cells: Example: usart1: serial@40011000 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&clk_pclk2>; diff --git a/Documentation/devicetree/bindings/dma/stm32-dmamux.txt b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt new file mode 100644 index 000000000000..1b893b235507 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32-dmamux.txt @@ -0,0 +1,84 @@ +STM32 DMA MUX (DMA request router) + +Required properties: +- compatible: "st,stm32h7-dmamux" +- reg: Memory map for accessing module +- #dma-cells: Should be set to <3>. + First parameter is request line number. + Second is DMA channel configuration + Third is Fifo threshold + For more details about the three cells, please see + stm32-dma.txt documentation binding file +- dma-masters: Phandle pointing to the DMA controllers. + Several controllers are allowed. Only "st,stm32-dma" DMA + compatible are supported. + +Optional properties: +- dma-channels : Number of DMA requests supported. +- dma-requests : Number of DMAMUX requests supported. +- resets: Reference to a reset controller asserting the DMA controller +- clocks: Input clock of the DMAMUX instance. + +Example: + +/* DMA controller 1 */ +dma1: dma-controller@40020000 { + compatible = "st,stm32-dma"; + reg = <0x40020000 0x400>; + interrupts = <11>, + <12>, + <13>, + <14>, + <15>, + <16>, + <17>, + <47>; + clocks = <&timer_clk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + dma-channels = <8>; + dma-requests = <8>; +}; + +/* DMA controller 1 */ +dma2: dma@40020400 { + compatible = "st,stm32-dma"; + reg = <0x40020400 0x400>; + interrupts = <56>, + <57>, + <58>, + <59>, + <60>, + <68>, + <69>, + <70>; + clocks = <&timer_clk>; + #dma-cells = <4>; + st,mem2mem; + resets = <&rcc 150>; + dma-channels = <8>; + dma-requests = <8>; +}; + +/* DMA mux */ +dmamux1: dma-router@40020800 { + compatible = "st,stm32h7-dmamux"; + reg = <0x40020800 0x3c>; + #dma-cells = <3>; + dma-requests = <128>; + dma-channels = <16>; + dma-masters = <&dma1 &dma2>; + clocks = <&timer_clk>; +}; + +/* DMA client */ +usart1: serial@40011000 { + compatible = "st,stm32-usart", "st,stm32-uart"; + reg = <0x40011000 0x400>; + interrupts = <37>; + clocks = <&timer_clk>; + dmas = <&dmamux1 41 0x414 0>, + <&dmamux1 42 0x414 0>; + dma-names = "rx", "tx"; +}; diff --git a/Documentation/devicetree/bindings/dma/stm32-mdma.txt b/Documentation/devicetree/bindings/dma/stm32-mdma.txt new file mode 100644 index 000000000000..d18772d6bc65 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/stm32-mdma.txt @@ -0,0 +1,94 @@ +* STMicroelectronics STM32 MDMA controller + +The STM32 MDMA is a general-purpose direct memory access controller capable of +supporting 64 independent DMA channels with 256 HW requests. + +Required properties: +- compatible: Should be "st,stm32h7-mdma" +- reg: Should contain MDMA registers location and length. This should include + all of the per-channel registers. +- interrupts: Should contain the MDMA interrupt. +- clocks: Should contain the input clock of the DMA instance. +- resets: Reference to a reset controller asserting the DMA controller. +- #dma-cells : Must be <5>. See DMA client paragraph for more details. + +Optional properties: +- dma-channels: Number of DMA channels supported by the controller. +- dma-requests: Number of DMA request signals supported by the controller. +- st,ahb-addr-masks: Array of u32 mask to list memory devices addressed via + AHB bus. + +Example: + + mdma1: dma@52000000 { + compatible = "st,stm32h7-mdma"; + reg = <0x52000000 0x1000>; + interrupts = <122>; + clocks = <&timer_clk>; + resets = <&rcc 992>; + #dma-cells = <5>; + dma-channels = <16>; + dma-requests = <32>; + st,ahb-addr-masks = <0x20000000>, <0x00000000>; + }; + +* DMA client + +DMA clients connected to the STM32 MDMA controller must use the format +described in the dma.txt file, using a five-cell specifier for each channel: +a phandle to the MDMA controller plus the following five integer cells: + +1. The request line number +2. The priority level + 0x00: Low + 0x01: Medium + 0x10: High + 0x11: Very high +3. A 32bit mask specifying the DMA channel configuration + -bit 0-1: Source increment mode + 0x00: Source address pointer is fixed + 0x10: Source address pointer is incremented after each data transfer + 0x11: Source address pointer is decremented after each data transfer + -bit 2-3: Destination increment mode + 0x00: Destination address pointer is fixed + 0x10: Destination address pointer is incremented after each data + transfer + 0x11: Destination address pointer is decremented after each data + transfer + -bit 8-9: Source increment offset size + 0x00: byte (8bit) + 0x01: half-word (16bit) + 0x10: word (32bit) + 0x11: double-word (64bit) + -bit 10-11: Destination increment offset size + 0x00: byte (8bit) + 0x01: half-word (16bit) + 0x10: word (32bit) + 0x11: double-word (64bit) +-bit 25-18: The number of bytes to be transferred in a single transfer + (min = 1 byte, max = 128 bytes) +-bit 29:28: Trigger Mode + 0x00: Each MDMA request triggers a buffer transfer (max 128 bytes) + 0x01: Each MDMA request triggers a block transfer (max 64K bytes) + 0x10: Each MDMA request triggers a repeated block transfer + 0x11: Each MDMA request triggers a linked list transfer +4. A 32bit value specifying the register to be used to acknowledge the request + if no HW ack signal is used by the MDMA client +5. A 32bit mask specifying the value to be written to acknowledge the request + if no HW ack signal is used by the MDMA client + +Example: + + i2c4: i2c@5c002000 { + compatible = "st,stm32f7-i2c"; + reg = <0x5c002000 0x400>; + interrupts = <95>, + <96>; + clocks = <&timer_clk>; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&mdma1 36 0x0 0x40008 0x0 0x0>, + <&mdma1 37 0x0 0x40002 0x0 0x0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/dma/sun4i-dma.txt b/Documentation/devicetree/bindings/dma/sun4i-dma.txt index 3b484380c56a..8ad556aca70b 100644 --- a/Documentation/devicetree/bindings/dma/sun4i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun4i-dma.txt @@ -12,7 +12,7 @@ Required properties: second cell holding the request line number. Example: - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun4i-a10-dma"; reg = <0x01c02000 0x1000>; interrupts = <27>; @@ -32,7 +32,7 @@ The three cells in order are: 3. The port ID as specified in the datasheet Example: - spi2: spi@01c17000 { + spi2: spi@1c17000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c17000 0x1000>; interrupts = <0 12 4>; diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt index 98fbe1a5c6dd..7fccc20d8331 100644 --- a/Documentation/devicetree/bindings/dma/sun6i-dma.txt +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -18,7 +18,7 @@ Required properties: - #dma-cells : Should be 1, a single cell holding a line request number Example: - dma: dma-controller@01c02000 { + dma: dma-controller@1c02000 { compatible = "allwinner,sun6i-a31-dma"; reg = <0x01c02000 0x1000>; interrupts = <0 50 4>; @@ -27,6 +27,32 @@ Example: #dma-cells = <1>; }; +------------------------------------------------------------------------------ +For A64 DMA controller: + +Required properties: +- compatible: "allwinner,sun50i-a64-dma" +- dma-channels: Number of DMA channels supported by the controller. + Refer to Documentation/devicetree/bindings/dma/dma.txt +- all properties above, i.e. reg, interrupts, clocks, resets and #dma-cells + +Optional properties: +- dma-requests: Number of DMA request signals supported by the controller. + Refer to Documentation/devicetree/bindings/dma/dma.txt + +Example: + dma: dma-controller@1c02000 { + compatible = "allwinner,sun50i-a64-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + dma-channels = <8>; + dma-requests = <27>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; +------------------------------------------------------------------------------ + Clients: DMA clients connected to the A31 DMA controller must use the format @@ -38,7 +64,7 @@ The two cells in order are: 2. The port ID as specified in the datasheet Example: -spi2: spi@01c6a000 { +spi2: spi@1c6a000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c6a000 0x1000>; interrupts = <0 67 4>; diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt index 41f0c1a07c56..66026dcf53e1 100644 --- a/Documentation/devicetree/bindings/dma/ti-edma.txt +++ b/Documentation/devicetree/bindings/dma/ti-edma.txt @@ -142,7 +142,7 @@ mcasp0: mcasp@48038000 { }; 2. -edma1: edma@02728000 { +edma1: edma@2728000 { compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc"; reg = <0x02728000 0x8000>; reg-names = "edma3_cc"; @@ -165,13 +165,13 @@ edma1: edma@02728000 { power-domains = <&k2g_pds 0x4f>; }; -edma1_tptc0: tptc@027b0000 { +edma1_tptc0: tptc@27b0000 { compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b0000 0x400>; power-domains = <&k2g_pds 0x4f>; }; -edma1_tptc1: tptc@027b8000 { +edma1_tptc1: tptc@27b8000 { compatible = "ti, k2g-edma3-tptc", "ti,edma3-tptc"; reg = <0x027b8000 0x400>; power-domains = <&k2g_pds 0x4f>; diff --git a/Documentation/devicetree/bindings/dma/zxdma.txt b/Documentation/devicetree/bindings/dma/zxdma.txt index 3207ceb04d0b..abec59f35fde 100644 --- a/Documentation/devicetree/bindings/dma/zxdma.txt +++ b/Documentation/devicetree/bindings/dma/zxdma.txt @@ -26,7 +26,7 @@ Controller: Client: Use specific request line passing from dmax For example, spdif0 tx channel request line is 4 - spdif0: spdif0@0b004000 { + spdif0: spdif0@b004000 { #sound-dai-cells = <0>; compatible = "zte,zx296702-spdif"; reg = <0x0b004000 0x1000>; diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt index afc04589eadf..27f2bc15298a 100644 --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt @@ -36,6 +36,8 @@ Optional properties: - read-only: this parameterless property disables writes to the eeprom + - size: total eeprom size in bytes + Example: eeprom@52 { diff --git a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt index e821e16ad65b..0c10802c8327 100644 --- a/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt +++ b/Documentation/devicetree/bindings/firmware/nvidia,tegra186-bpmp.txt @@ -66,7 +66,7 @@ See ".../sram/sram.txt" for the bindings. Example: -hsp_top0: hsp@03c00000 { +hsp_top0: hsp@3c00000 { ... #mbox-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt index 20f26fbce875..7b40054be0d8 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt @@ -18,6 +18,8 @@ Required properties: * Core, iface, and bus clocks required for "qcom,scm" - clock-names: Must contain "core" for the core clock, "iface" for the interface clock and "bus" for the bus clock per the requirements of the compatible. +- qcom,dload-mode: phandle to the TCSR hardware block and offset of the + download mode control register (optional) Example for MSM8916: diff --git a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt index 6c7e6c7302f5..0423699d74c7 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-dsp-keystone.txt @@ -25,7 +25,7 @@ Please refer to gpio.txt in this directory for details of the common GPIO bindings used by client devices. Example: - dspgpio0: keystone_dsp_gpio@02620240 { + dspgpio0: keystone_dsp_gpio@2620240 { compatible = "ti,keystone-dsp-gpio"; ti,syscon-dev = <&devctrl 0x240>; gpio-controller; diff --git a/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt new file mode 100644 index 000000000000..b3a6444b8f45 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-max3191x.txt @@ -0,0 +1,59 @@ +GPIO driver for Maxim MAX3191x industrial serializer + +Required properties: + - compatible: Must be one of: + "maxim,max31910" + "maxim,max31911" + "maxim,max31912" + "maxim,max31913" + "maxim,max31953" + "maxim,max31963" + - reg: Chip select number. + - gpio-controller: Marks the device node as a GPIO controller. + - #gpio-cells: Should be two. For consumer use see gpio.txt. + +Optional properties: + - #daisy-chained-devices: + Number of chips in the daisy-chain (default is 1). + - maxim,modesel-gpios: GPIO pins to configure modesel of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + (if each chip is driven by a separate pin) or 1 + (if all chips are wired to the same pin). + - maxim,fault-gpios: GPIO pins to read fault of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + or 1. + - maxim,db0-gpios: GPIO pins to configure debounce of each chip. + The number of GPIOs must equal "#daisy-chained-devices" + or 1. + - maxim,db1-gpios: GPIO pins to configure debounce of each chip. + The number of GPIOs must equal "maxim,db0-gpios". + - maxim,modesel-8bit: Boolean whether the modesel pin of the chips is + pulled high (8-bit mode). Use this if the modesel pin + is hardwired and consequently "maxim,modesel-gpios" + cannot be specified. By default if neither this nor + "maxim,modesel-gpios" is given, the driver assumes + that modesel is pulled low (16-bit mode). + - maxim,ignore-undervoltage: + Boolean whether to ignore undervoltage alarms signaled + by the "maxim,fault-gpios" or by the status byte + (in 16-bit mode). Use this if the chips are powered + through 5VOUT instead of VCC24V, in which case they + will constantly signal undervoltage. + +For other required and optional properties of SPI slave nodes please refer to +../spi/spi-bus.txt. + +Example: + gpio@0 { + compatible = "maxim,max31913"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + + maxim,modesel-gpios = <&gpio2 23>; + maxim,fault-gpios = <&gpio2 24 GPIO_ACTIVE_LOW>; + maxim,db0-gpios = <&gpio2 25>; + maxim,db1-gpios = <&gpio2 26>; + + spi-max-frequency = <25000000>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt index 1fd98ffa8cb7..528f5ef5a893 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090-pdc.txt @@ -30,7 +30,7 @@ Optional properties: Example: - pdc_gpios: gpio-controller@02006500 { + pdc_gpios: gpio-controller@2006500 { gpio-controller; #gpio-cells = <2>; diff --git a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt index 174cdf309170..b05a90e0ab29 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-tz1090.txt @@ -59,7 +59,7 @@ Required properties: Example: - gpios: gpio-controller@02005800 { + gpios: gpio-controller@2005800 { #address-cells = <1>; #size-cells = <0>; compatible = "img,tz1090-gpio"; diff --git a/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt new file mode 100644 index 000000000000..fed9158dd913 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-uniphier.txt @@ -0,0 +1,52 @@ +UniPhier GPIO controller + +Required properties: +- compatible: Should be "socionext,uniphier-gpio". +- reg: Specifies offset and length of the register set for the device. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells: Should be 2. The first cell is the pin number and the second + cell is used to specify optional parameters. +- interrupt-parent: Specifies the parent interrupt controller. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Should be 2. The first cell defines the interrupt number. + The second cell bits[3:0] is used to specify trigger type as follows: + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + Valid combinations are 1, 2, 3, 4, 8. +- ngpios: Specifies the number of GPIO lines. +- gpio-ranges: Mapping to pin controller pins (as described in gpio.txt) +- socionext,interrupt-ranges: Specifies an interrupt number mapping between + this GPIO controller and its interrupt parent, in the form of arbitrary + number of <child-interrupt-base parent-interrupt-base length> triplets. + +Optional properties: +- gpio-ranges-group-names: Used for named gpio ranges (as described in gpio.txt) + +Example: + gpio: gpio@55000000 { + compatible = "socionext,uniphier-gpio"; + reg = <0x55000000 0x200>; + interrupt-parent = <&aidet>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pinctrl 0 0 0>; + gpio-ranges-group-names = "gpio_range"; + ngpios = <248>; + socionext,interrupt-ranges = <0 48 16>, <16 154 5>, <21 217 3>; + }; + +Consumer Example: + + sdhci0_pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio UNIPHIER_GPIO_PORT(29, 4) GPIO_ACTIVE_LOW>; + }; + +Please note UNIPHIER_GPIO_PORT(29, 4) represents PORT294 in the SoC document. +Unfortunately, only the one's place is octal in the port numbering. (That is, +PORT 8, 9, 18, 19, 28, 29, ... are missing.) UNIPHIER_GPIO_PORT() is a helper +macro to calculate 29 * 8 + 4. diff --git a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt index 51c86f69995e..a7ac460ad657 100644 --- a/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt +++ b/Documentation/devicetree/bindings/gpio/renesas,gpio-rcar.txt @@ -14,6 +14,8 @@ Required Properties: - "renesas,gpio-r8a7794": for R8A7794 (R-Car E2) compatible GPIO controller. - "renesas,gpio-r8a7795": for R8A7795 (R-Car H3) compatible GPIO controller. - "renesas,gpio-r8a7796": for R8A7796 (R-Car M3-W) compatible GPIO controller. + - "renesas,gpio-r8a77970": for R8A77970 (R-Car V3M) compatible GPIO controller. + - "renesas,gpio-r8a77995": for R8A77995 (R-Car D3) compatible GPIO controller. - "renesas,rcar-gen1-gpio": for a generic R-Car Gen1 GPIO controller. - "renesas,rcar-gen2-gpio": for a generic R-Car Gen2 or RZ/G1 GPIO controller. - "renesas,rcar-gen3-gpio": for a generic R-Car Gen3 GPIO controller. diff --git a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt index 4d6c8cdc8586..4a75da7051bd 100644 --- a/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/snps-dwapb-gpio.txt @@ -29,6 +29,7 @@ controller. - interrupts : The interrupt to the parent controller raised when GPIOs generate the interrupts. - snps,nr-gpios : The number of pins in the port, a single cell. +- resets : Reset line for the controller. Example: diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt index b4ebd56d03f3..c6814d7cc2b2 100644 --- a/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt +++ b/Documentation/devicetree/bindings/gpu/arm,mali-utgard.txt @@ -13,6 +13,10 @@ Required properties: + allwinner,sun50i-h5-mali + amlogic,meson-gxbb-mali + amlogic,meson-gxl-mali + + rockchip,rk3036-mali + + rockchip,rk3066-mali + + rockchip,rk3188-mali + + rockchip,rk3228-mali + stericsson,db8500-mali - reg: Physical base address and length of the GPU registers @@ -40,10 +44,18 @@ Optional properties: Memory region to allocate from, as defined in Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt + - mali-supply: + Phandle to regulator for the Mali device, as defined in + Documentation/devicetree/bindings/regulator/regulator.txt for details. + - operating-points-v2: Operating Points for the GPU, as defined in Documentation/devicetree/bindings/opp/opp.txt + - power-domains: + A power domain consumer specifier as defined in + Documentation/devicetree/bindings/power/power_domain.txt + Vendor-specific bindings ------------------------ @@ -63,6 +75,10 @@ to specify one more vendor-specific compatible, among: Required properties: * resets: phandle to the reset line for the GPU + - Rockchip variants: + Required properties: + * resets: phandle to the reset line for the GPU + - stericsson,db8500-mali Required properties: * interrupt-names and interrupts: diff --git a/Documentation/devicetree/bindings/hsi/omap-ssi.txt b/Documentation/devicetree/bindings/hsi/omap-ssi.txt index b8eca3c7810d..955e335e7e56 100644 --- a/Documentation/devicetree/bindings/hsi/omap-ssi.txt +++ b/Documentation/devicetree/bindings/hsi/omap-ssi.txt @@ -1,10 +1,12 @@ OMAP SSI controller bindings -OMAP Synchronous Serial Interface (SSI) controller implements a legacy -variant of MIPI's High Speed Synchronous Serial Interface (HSI). +OMAP3's Synchronous Serial Interface (SSI) controller implements a +legacy variant of MIPI's High Speed Synchronous Serial Interface (HSI), +while the controller found inside OMAP4 is supposed to be fully compliant +with the HSI standard. Required properties: -- compatible: Should include "ti,omap3-ssi". +- compatible: Should include "ti,omap3-ssi" or "ti,omap4-hsi" - reg-names: Contains the values "sys" and "gdd" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -27,6 +29,7 @@ Each port is represented as a sub-node of the ti,omap3-ssi device. Required Port sub-node properties: - compatible: Should be set to the following value ti,omap3-ssi-port (applicable to OMAP34xx devices) + ti,omap4-hsi-port (applicable to OMAP44xx devices) - reg-names: Contains the values "tx" and "rx" (in this order). - reg: Contains a matching register specifier for each entry in reg-names. @@ -38,6 +41,10 @@ Required Port sub-node properties: property. If it's missing the port will not be enabled. +Optional properties: +- ti,hwmods: Shall contain TI interconnect module name if needed + by the SoC + Example for Nokia N900: ssi-controller@48058000 { diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt index 439a7430fc68..439a7430fc68 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-fan.txt +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt diff --git a/Documentation/devicetree/bindings/hwmon/max1619.txt b/Documentation/devicetree/bindings/hwmon/max1619.txt new file mode 100644 index 000000000000..c70dbbe1e56f --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max1619.txt @@ -0,0 +1,12 @@ +Bindings for MAX1619 Temperature Sensor + +Required properties: +- compatible : "maxim,max1619" +- reg : I2C address, one of 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, or + 0x4d, 0x4e + +Example: + temp@4c { + compatible = "maxim,max1619"; + reg = <0x4c>; + }; diff --git a/Documentation/devicetree/bindings/hwmon/max31785.txt b/Documentation/devicetree/bindings/hwmon/max31785.txt new file mode 100644 index 000000000000..106e08c56aaa --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/max31785.txt @@ -0,0 +1,22 @@ +Bindings for the Maxim MAX31785 Intelligent Fan Controller +========================================================== + +Reference: + +https://datasheets.maximintegrated.com/en/ds/MAX31785.pdf + +The Maxim MAX31785 is a PMBus device providing closed-loop, multi-channel fan +management with temperature and remote voltage sensing. Various fan control +features are provided, including PWM frequency control, temperature hysteresis, +dual tachometer measurements, and fan health monitoring. + +Required properties: +- compatible : One of "maxim,max31785" or "maxim,max31785a" +- reg : I2C address, one of 0x52, 0x53, 0x54, 0x55. + +Example: + + fans@52 { + compatible = "maxim,max31785"; + reg = <0x52>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt index bd6480b19535..e7106bfc1f13 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -7,7 +7,9 @@ Required Properties: - compatible : should be "aspeed,ast2400-i2c-bus" or "aspeed,ast2500-i2c-bus" - clocks : root clock of bus, should reference the APB - clock + clock in the second cell +- resets : phandle to reset controller with the reset number in + the second cell - interrupts : interrupt number - interrupt-parent : interrupt controller for bus, should reference a aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic @@ -40,7 +42,8 @@ i2c { #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <0>; interrupt-parent = <&i2c_ic>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt index 2296d782b4c2..7d53a2b79553 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-axxia.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-axxia.txt @@ -17,7 +17,7 @@ Optional properties : Example : -i2c@02010084000 { +i2c@2010084000 { compatible = "lsi,api2c"; device_type = "i2c"; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index 5b123e0e4cc2..64e6e656c345 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -6,6 +6,18 @@ davinci/keystone i2c interface contains. Required properties: - compatible: "ti,davinci-i2c" or "ti,keystone-i2c"; - reg : Offset and length of the register set for the device +- clocks: I2C functional clock phandle. + For 66AK2G this property should be set per binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +SoC-specific Required Properties: + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the I2C device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt Recommended properties : - interrupts : standard interrupt property. diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt index 4f8ec947c6bd..38a05562d1d2 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt @@ -2,25 +2,39 @@ Device-Tree bindings for i2c gpio driver Required properties: - compatible = "i2c-gpio"; - - gpios: sda and scl gpio - + - sda-gpios: gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + - scl-gpios: gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. Optional properties: - - i2c-gpio,sda-open-drain: sda as open drain - - i2c-gpio,scl-open-drain: scl as open drain - i2c-gpio,scl-output-only: scl as output only - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) - i2c-gpio,timeout-ms: timeout to get data +Deprecated properties, do not use in new device tree sources: + - gpios: sda and scl gpio, alternative for {sda,scl}-gpios + - i2c-gpio,sda-open-drain: this means that something outside of our + control has put the GPIO line used for SDA into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + - i2c-gpio,scl-open-drain: this means that something outside of our + control has put the GPIO line used for SCL into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + Example nodes: +#include <dt-bindings/gpio/gpio.h> + i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ - >; - i2c-gpio,sda-open-drain; - i2c-gpio,scl-open-drain; + sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt index 212e6779dc5c..b38f58a1c878 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.txt @@ -6,10 +6,10 @@ multiplexer/switch will have one child node for each child bus. Optional properties: - #address-cells = <1>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - #size-cells = <0>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - i2c-mux For i2c multiplexers/switches that have child nodes that are a mixture diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index cad39aee9f73..a777477e4547 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -13,6 +13,7 @@ Required properties: "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC. "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC. "renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC. + "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC. "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible device. diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt index 6b765485af7d..49df0053347a 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt @@ -24,7 +24,7 @@ Slave device properties: Example: - p2wi@01f03400 { + p2wi@1f03400 { compatible = "allwinner,sun6i-a31-p2wi"; reg = <0x01f03400 0x400>; interrupts = <0 39 4>; diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index cee9d5055fa2..11263982470e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below. interrupts used by the device. - interrupt-names - "irq" and "wakeup" names are recognized by I2C core, other names are - left to individual drivers. + "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, + other names are left to individual drivers. - host-notify device uses SMBus host notify protocol instead of interrupt line. diff --git a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt index bcd3ac8e6e0c..7d64753df949 100644 --- a/Documentation/devicetree/bindings/iio/adc/mcp320x.txt +++ b/Documentation/devicetree/bindings/iio/adc/mcp320x.txt @@ -29,15 +29,29 @@ Required properties: "microchip,mcp3204" "microchip,mcp3208" "microchip,mcp3301" + "microchip,mcp3550-50" + "microchip,mcp3550-60" + "microchip,mcp3551" + "microchip,mcp3553" NOTE: The use of the compatibles with no vendor prefix is deprecated and only listed because old DT use them. + - spi-cpha, spi-cpol (boolean): + Either SPI mode (0,0) or (1,1) must be used, so specify + none or both of spi-cpha, spi-cpol. The MCP3550/1/3 + is more efficient in mode (1,1) as only 3 instead of + 4 bytes need to be read from the ADC, but not all SPI + masters support it. + + - vref-supply: Phandle to the external reference voltage supply. + Examples: spi_controller { mcp3x0x@0 { compatible = "mcp3002"; reg = <0>; spi-max-frequency = <1000000>; + vref-supply = <&vref_reg>; }; }; diff --git a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt index 64dc4843c180..0df9befdaecc 100644 --- a/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt +++ b/Documentation/devicetree/bindings/iio/adc/mt6577_auxadc.txt @@ -12,6 +12,7 @@ for the Thermal Controller which holds a phandle to the AUXADC. Required properties: - compatible: Should be one of: - "mediatek,mt2701-auxadc": For MT2701 family of SoCs + - "mediatek,mt2712-auxadc": For MT2712 family of SoCs - "mediatek,mt7622-auxadc": For MT7622 family of SoCs - "mediatek,mt8173-auxadc": For MT8173 family of SoCs - reg: Address range of the AUXADC unit. diff --git a/Documentation/devicetree/bindings/iio/dac/ds4424.txt b/Documentation/devicetree/bindings/iio/dac/ds4424.txt new file mode 100644 index 000000000000..eaebbf8dab40 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ds4424.txt @@ -0,0 +1,20 @@ +Maxim Integrated DS4422/DS4424 7-bit Sink/Source Current DAC Device Driver + +Datasheet publicly available at: +https://datasheets.maximintegrated.com/en/ds/DS4422-DS4424.pdf + +Required properties: + - compatible: Should be one of + maxim,ds4422 + maxim,ds4424 + - reg: Should contain the DAC I2C address + +Optional properties: + - vcc-supply: Power supply is optional. If not defined, driver will ignore it. + +Example: + ds4224@10 { + compatible = "maxim,ds4424"; + reg = <0x10>; /* When A0, A1 pins are ground */ + vcc-supply = <&vcc_3v3>; + }; diff --git a/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt new file mode 100644 index 000000000000..9cb0e10df704 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/dac/ti-dac082s085.txt @@ -0,0 +1,34 @@ +Texas Instruments 8/10/12-bit 2/4-channel DAC driver + +Required properties: + - compatible: Must be one of: + "ti,dac082s085" + "ti,dac102s085" + "ti,dac122s085" + "ti,dac084s085" + "ti,dac104s085" + "ti,dac124s085" + - reg: Chip select number. + - spi-cpha, spi-cpol: SPI mode (0,1) or (1,0) must be used, so specify + either spi-cpha or spi-cpol (but not both). + - vref-supply: Phandle to the external reference voltage supply. + +For other required and optional properties of SPI slave nodes please refer to +../../spi/spi-bus.txt. + +Example: + vref_2v5_reg: regulator-vref { + compatible = "regulator-fixed"; + regulator-name = "2v5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + dac@0 { + compatible = "ti,dac082s085"; + reg = <0>; + spi-max-frequency = <40000000>; + spi-cpol; + vref-supply = <&vref_2v5_reg>; + }; diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt index 295a9edfa4fd..8d8176459d09 100644 --- a/Documentation/devicetree/bindings/iio/health/max30100.txt +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt @@ -20,9 +20,9 @@ Optional properties: Example: -max30100@057 { +max30100@57 { compatible = "maxim,max30100"; - reg = <57>; + reg = <0x57>; maxim,led-current-microamp = <24000 50000>; interrupt-parent = <&gpio1>; interrupts = <16 2>; diff --git a/Documentation/devicetree/bindings/iio/health/max30102.txt b/Documentation/devicetree/bindings/iio/health/max30102.txt index c695e7cbeefb..8629c18b0e78 100644 --- a/Documentation/devicetree/bindings/iio/health/max30102.txt +++ b/Documentation/devicetree/bindings/iio/health/max30102.txt @@ -20,7 +20,7 @@ Optional properties: Example: -max30100@57 { +max30102@57 { compatible = "maxim,max30102"; reg = <0x57>; maxim,red-led-current-microamp = <7000>; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt index 77d5aba1bd8c..baecc4a85197 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8974.txt @@ -19,7 +19,7 @@ Optional properties: Example: -ak8974@0f { +ak8974@f { compatible = "asahi-kasei,ak8974"; reg = <0x0f>; avdd-supply = <&foo_reg>; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt index e1e7dd3259f6..aa67ceb0d4e0 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/ak8975.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ak8975@0c { +ak8975@c { compatible = "asahi-kasei,ak8975"; reg = <0x0c>; gpios = <&gpj0 7 0>; diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt index 38d74314b7ab..b6c1afa6f02d 100644 --- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt @@ -16,6 +16,10 @@ Optional properties: - ams,tuning-capacitor-pf: Calibration tuning capacitor stepping value 0 - 120pF. This will require using the calibration data from the manufacturer. + - ams,nflwdth: Set the noise and watchdog threshold register on + startup. This will need to set according to the noise from the + MCU board, and possibly the local environment. Refer to the + datasheet for the threshold settings. Example: @@ -27,4 +31,5 @@ as3935@0 { interrupt-parent = <&gpio1>; interrupts = <16 1>; ams,tuning-capacitor-pf = <80>; + ams,nflwdth = <0x44>; }; diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt index 9ec6f5ce54fc..6f626f73417e 100644 --- a/Documentation/devicetree/bindings/iio/st-sensors.txt +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -46,6 +46,8 @@ Accelerometers: - st,h3lis331dl-accel - st,lng2dm-accel - st,lis3l02dq +- st,lis2dw12 +- st,lis3dhh Gyroscopes: - st,l3g4200d-gyro @@ -71,3 +73,5 @@ Pressure sensors: - st,lps25h-press - st,lps331ap-press - st,lps22hb-press +- st,lps33hw +- st,lps35hw diff --git a/Documentation/devicetree/bindings/input/gpio-mouse.txt b/Documentation/devicetree/bindings/input/gpio-mouse.txt new file mode 100644 index 000000000000..519510a11af9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-mouse.txt @@ -0,0 +1,32 @@ +Device-Tree bindings for GPIO attached mice + +This simply uses standard GPIO handles to define a simple mouse connected +to 5-7 GPIO lines. + +Required properties: + - compatible: must be "gpio-mouse" + - scan-interval-ms: The scanning interval in milliseconds + - up-gpios: GPIO line phandle to the line indicating "up" + - down-gpios: GPIO line phandle to the line indicating "down" + - left-gpios: GPIO line phandle to the line indicating "left" + - right-gpios: GPIO line phandle to the line indicating "right" + +Optional properties: + - button-left-gpios: GPIO line handle to the left mouse button + - button-middle-gpios: GPIO line handle to the middle mouse button + - button-right-gpios: GPIO line handle to the right mouse button +Example: + +#include <dt-bindings/gpio/gpio.h> + +gpio-mouse { + compatible = "gpio-mouse"; + scan-interval-ms = <50>; + up-gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + down-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + left-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + right-gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + button-left-gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + button-middle-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + button-right-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt index 4357e498ef04..1458c3179a63 100644 --- a/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt +++ b/Documentation/devicetree/bindings/input/sun4i-lradc-keys.txt @@ -19,7 +19,7 @@ Example: #include <dt-bindings/input/input.h> - lradc: lradc@01c22800 { + lradc: lradc@1c22800 { compatible = "allwinner,sun4i-a10-lradc-keys"; reg = <0x01c22800 0x100>; interrupts = <31>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt index 49fa14ed155c..298e3442f143 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/egalax-ts.txt @@ -10,7 +10,7 @@ Required properties: Example: - egalax_ts@04 { + touchscreen@4 { compatible = "eeti,egalax_ts"; reg = <0x04>; interrupt-parent = <&gpio1>; diff --git a/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt new file mode 100644 index 000000000000..1dcff4a43eaa --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/exc3000.txt @@ -0,0 +1,27 @@ +* EETI EXC3000 Multiple Touch Controller + +Required properties: +- compatible: must be "eeti,exc3000" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt +- touchscreen-size-x: See touchscreen.txt +- touchscreen-size-y: See touchscreen.txt + +Optional properties: +- touchscreen-inverted-x: See touchscreen.txt +- touchscreen-inverted-y: See touchscreen.txt +- touchscreen-swapped-x-y: See touchscreen.txt + +Example: + + touchscreen@2a { + compatible = "eeti,exc3000"; + reg = <0x2a>; + interrupt-parent = <&gpio1>; + interrupts = <9 IRQ_TYPE_LEVEL_LOW>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + touchscreen-inverted-x; + touchscreen-swapped-x-y; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt index c98757a69110..0c369d8ebcab 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt @@ -2,7 +2,8 @@ Device tree bindings for Goodix GT9xx series touchscreen controller Required properties: - - compatible : Should be "goodix,gt911" + - compatible : Should be "goodix,gt1151" + or "goodix,gt911" or "goodix,gt9110" or "goodix,gt912" or "goodix,gt927" diff --git a/Documentation/devicetree/bindings/input/touchscreen/hideep.txt b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt new file mode 100644 index 000000000000..121d9b7c79a2 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hideep.txt @@ -0,0 +1,42 @@ +* HiDeep Finger and Stylus touchscreen controller + +Required properties: +- compatible : must be "hideep,hideep-ts" +- reg : I2C slave address, (e.g. 0x6C). +- interrupt-parent : Interrupt controller to which the chip is connected. +- interrupts : Interrupt to which the chip is connected. + +Optional properties: +- vdd-supply : It is the controller supply for controlling + main voltage(3.3V) through the regulator. +- vid-supply : It is the controller supply for controlling + IO voltage(1.8V) through the regulator. +- reset-gpios : Define for reset gpio pin. + It is to use for reset IC. +- touchscreen-size-x : X axis size of touchscreen +- touchscreen-size-y : Y axis size of touchscreen +- linux,keycodes : Specifies an array of numeric keycode values to + be used for reporting button presses. The array can + contain up to 3 entries. + +Example: + +#include "dt-bindings/input/input.h" + +i2c@00000000 { + + /* ... */ + + touchscreen@6c { + compatible = "hideep,hideep-ts"; + reg = <0x6c>; + interrupt-parent = <&gpx1>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + vdd-supply = <&ldo15_reg>"; + vid-supply = <&ldo18_reg>; + reset-gpios = <&gpx1 5 0>; + touchscreen-size-x = <1080>; + touchscreen-size-y = <1920>; + linux,keycodes = <KEY_HOME>, <KEY_MENU>, <KEY_BACK>; + }; +}; diff --git a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt index e67e58b61706..164915004424 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/imx6ul_tsc.txt @@ -21,7 +21,7 @@ Optional properties: each read. Valid values are 1, 4, 8, 16 and 32. Example: - tsc: tsc@02040000 { + tsc: tsc@2040000 { compatible = "fsl,imx6ul-tsc"; reg = <0x02040000 0x4000>, <0x0219c000 0x4000>; interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt new file mode 100644 index 000000000000..d9b7c2ff611e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/samsung,s6sy761.txt @@ -0,0 +1,34 @@ +* Samsung S6SY761 touchscreen controller + +Required properties: +- compatible : must be "samsung,s6sy761" +- reg : I2C slave address, (e.g. 0x48) +- interrupt-parent : the phandle to the interrupt controller which provides + the interrupt +- interrupts : interrupt specification +- avdd-supply : analogic power supply +- vdd-supply : power supply + +Optional properties: +- touchscreen-size-x : see touchscreen.txt. This property is embedded in the + device. If defined it forces a different x resolution. +- touchscreen-size-y : see touchscreen.txt. This property is embedded in the + device. If defined it forces a different y resolution. + +Example: + +i2c@00000000 { + + /* ... */ + + touchscreen@48 { + compatible = "samsung,s6sy761"; + reg = <0x48>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_NONE>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + touchscreen-size-x = <4096>; + touchscreen-size-y = <4096>; + }; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt index 4ae553eb333d..4903fb72d883 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/allwinner,sunxi-nmi.txt @@ -20,7 +20,7 @@ Required properties: Example: -sc-nmi-intc@01c00030 { +sc-nmi-intc@1c00030 { compatible = "allwinner,sun7i-a20-sc-nmi"; interrupt-controller; #interrupt-cells = <2>; diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt new file mode 100644 index 000000000000..a83f9a5734ca --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt @@ -0,0 +1,36 @@ +Amlogic meson GPIO interrupt controller + +Meson SoCs contains an interrupt controller which is able to watch the SoC +pads and generate an interrupt on edge or level. The controller is essentially +a 256 pads to 8 GIC interrupt multiplexer, with a filter block to select edge +or level and polarity. It does not expose all 256 mux inputs because the +documentation shows that the upper part is not mapped to any pad. The actual +number of interrupt exposed depends on the SoC. + +Required properties: + +- compatible : must have "amlogic,meson8-gpio-intc” and either + “amlogic,meson8-gpio-intc” for meson8 SoCs (S802) or + “amlogic,meson8b-gpio-intc” for meson8b SoCs (S805) or + “amlogic,meson-gxbb-gpio-intc” for GXBB SoCs (S905) or + “amlogic,meson-gxl-gpio-intc” for GXL SoCs (S905X, S912) +- interrupt-parent : a phandle to the GIC the interrupts are routed to. + Usually this is provided at the root level of the device tree as it is + common to most of the SoC. +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 2. +- meson,channel-interrupts: Array with the 8 upstream hwirq numbers. These + are the hwirqs used on the parent interrupt controller. + +Example: + +gpio_interrupt: interrupt-controller@9880 { + compatible = "amlogic,meson-gxbb-gpio-intc", + "amlogic,meson-gpio-intc"; + reg = <0x0 0x9880 0x0 0x10>; + interrupt-controller; + #interrupt-cells = <2>; + meson,channel-interrupts = <64 65 66 67 68 69 70 71>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt index 4c29cdab0ea5..0a57f2f4167d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt @@ -75,6 +75,10 @@ These nodes must have the following properties: - reg: Specifies the base physical address and size of the ITS registers. +Optional: +- socionext,synquacer-pre-its: (u32, u32) tuple describing the untranslated + address and size of the pre-ITS window. + The main GIC node must contain the appropriate #address-cells, #size-cells and ranges properties for the reg property of all ITS nodes. @@ -99,7 +103,7 @@ Examples: compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x200000>; + reg = <0x0 0x2c200000 0 0x20000>; }; }; @@ -124,14 +128,14 @@ Examples: compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x0 0x2c200000 0 0x200000>; + reg = <0x0 0x2c200000 0 0x20000>; }; gic-its@2c400000 { compatible = "arm,gic-v3-its"; msi-controller; #msi-cells = <1>; - reg = <0x0 0x2c400000 0 0x200000>; + reg = <0x0 0x2c400000 0 0x20000>; }; ppi-partitions { diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt index 448273a30a11..36df06c5c567 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,l2-intc.txt @@ -2,7 +2,8 @@ Broadcom Generic Level 2 Interrupt Controller Required properties: -- compatible: should be "brcm,l2-intc" +- compatible: should be "brcm,l2-intc" for latched interrupt controllers + should be "brcm,bcm7271-l2-intc" for level interrupt controllers - reg: specifies the base physical address and size of the registers - interrupt-controller: identifies the node as an interrupt controller - #interrupt-cells: specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt index 49ccabbfa6f3..a4ff93d6b7f3 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,ls-scfg-msi.txt @@ -8,6 +8,7 @@ Required properties: "fsl,ls1043a-msi" "fsl,ls1046a-msi" "fsl,ls1043a-v1.1-msi" + "fsl,ls1012a-msi" - msi-controller: indicates that this is a PCIe MSI controller node - reg: physical base address of the controller and length of memory mapped. - interrupts: an interrupt to the parent interrupt controller. diff --git a/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt new file mode 100644 index 000000000000..caec07cc7149 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/openrisc,ompic.txt @@ -0,0 +1,22 @@ +Open Multi-Processor Interrupt Controller + +Required properties: + +- compatible : This should be "openrisc,ompic" +- reg : Specifies base physical address and size of the register space. The + size is based on the number of cores the controller has been configured + to handle, this should be set to 8 bytes per cpu core. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : This should be set to 0 as this will not be an irq + parent. +- interrupts : Specifies the interrupt line to which the ompic is wired. + +Example: + +ompic: interrupt-controller@98000000 { + compatible = "openrisc,ompic"; + reg = <0x98000000 16>; + interrupt-controller; + #interrupt-cells = <0>; + interrupts = <1>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt index e3f052d8c11a..33c9a10fdc91 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.txt @@ -13,6 +13,9 @@ Required properties: - "renesas,irqc-r8a7793" (R-Car M2-N) - "renesas,irqc-r8a7794" (R-Car E2) - "renesas,intc-ex-r8a7795" (R-Car H3) + - "renesas,intc-ex-r8a7796" (R-Car M3-W) + - "renesas,intc-ex-r8a77970" (R-Car V3M) + - "renesas,intc-ex-r8a77995" (R-Car D3) - #interrupt-cells: has to be <2>: an interrupt index and flags, as defined in interrupts.txt in this directory - clocks: Must contain a reference to the functional clock. diff --git a/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt new file mode 100644 index 000000000000..8b2faefe29ca --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/socionext,synquacer-exiu.txt @@ -0,0 +1,32 @@ +Socionext SynQuacer External Interrupt Unit (EXIU) + +The Socionext Synquacer SoC has an external interrupt unit (EXIU) +that forwards a block of 32 configurable input lines to 32 adjacent +level-high type GICv3 SPIs. + +Required properties: + +- compatible : Should be "socionext,synquacer-exiu". +- reg : Specifies base physical address and size of the + control registers. +- interrupt-controller : Identifies the node as an interrupt controller. +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value must be 3. +- interrupt-parent : phandle of the GIC these interrupts are routed to. +- socionext,spi-base : The SPI number of the first SPI of the 32 adjacent + ones the EXIU forwards its interrups to. + +Notes: + +- Only SPIs can use the EXIU as an interrupt parent. + +Example: + + exiu: interrupt-controller@510c0000 { + compatible = "socionext,synquacer-exiu"; + reg = <0x0 0x510c0000 0x0 0x20>; + interrupt-controller; + interrupt-parent = <&gic>; + #interrupt-cells = <3>; + socionext,spi-base = <112>; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt index 6e7703d4ff5b..edf03f09244b 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/st,stm32-exti.txt @@ -2,7 +2,9 @@ STM32 External Interrupt Controller Required properties: -- compatible: Should be "st,stm32-exti" +- compatible: Should be: + "st,stm32-exti" + "st,stm32h7-exti" - reg: Specifies base physical address and size of the registers - interrupt-controller: Indentifies the node as an interrupt controller - #interrupt-cells: Specifies the number of cells to encode an interrupt diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt index d9bb106bdd16..5f94d7739d8d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,keystone-irq.txt @@ -20,7 +20,7 @@ Please refer to interrupts.txt in this directory for details of the common Interrupt Controllers bindings used by client devices. Example: - kirq0: keystone_irq0@026202a0 { + kirq0: keystone_irq0@26202a0 { compatible = "ti,keystone-irq"; ti,syscon-dev = <&devctrl 0x2a0>; interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>; diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt index b2641ceb2b40..059139abce35 100644 --- a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt +++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt @@ -115,7 +115,7 @@ to non-secure vs secure interrupt line. iommus = <&apps_iommu 4>; }; - gpu@01c00000 { + gpu@1c00000 { ... iommus = <&gpu_iommu 1>, <&gpu_iommu 2>; }; diff --git a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt index 3ed027cfca95..857df929a654 100644 --- a/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt +++ b/Documentation/devicetree/bindings/iommu/renesas,ipmmu-vmsa.txt @@ -53,7 +53,7 @@ Example: R8A7791 IPMMU-MX and VSP1-D0 bus master #iommu-cells = <1>; }; - vsp1@fe928000 { + vsp@fe928000 { ... iommus = <&ipmmu_mx 13>; ... diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt index 12c5ef26ec73..fdc40e354a64 100644 --- a/Documentation/devicetree/bindings/leds/ams,as3645a.txt +++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt @@ -15,11 +15,14 @@ Required properties compatible : Must be "ams,as3645a". reg : The I2C address of the device. Typically 0x30. +#address-cells : 1 +#size-cells : 0 -Required properties of the "flash" child node -============================================= +Required properties of the flash child node (0) +=============================================== +reg: 0 flash-timeout-us: Flash timeout in microseconds. The value must be in the range [100000, 850000] and divisible by 50000. flash-max-microamp: Maximum flash current in microamperes. Has to be @@ -33,20 +36,21 @@ ams,input-max-microamp: Maximum flash controller input current. The and divisible by 50000. -Optional properties of the "flash" child node -============================================= +Optional properties of the flash child node +=========================================== label : The label of the flash LED. -Required properties of the "indicator" child node -================================================= +Required properties of the indicator child node (1) +=================================================== +reg: 1 led-max-microamp: Maximum indicator current. The allowed values are 2500, 5000, 7500 and 10000. -Optional properties of the "indicator" child node -================================================= +Optional properties of the indicator child node +=============================================== label : The label of the indicator LED. @@ -55,16 +59,20 @@ Example ======= as3645a@30 { + #address-cells: 1 + #size-cells: 0 reg = <0x30>; compatible = "ams,as3645a"; - flash { + flash@0 { + reg = <0x0>; flash-timeout-us = <150000>; flash-max-microamp = <320000>; led-max-microamp = <60000>; ams,input-max-microamp = <1750000>; label = "as3645a:flash"; }; - indicator { + indicator@1 { + reg = <0x1>; led-max-microamp = <10000>; label = "as3645a:indicator"; }; diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt index 59b56365f648..cf1ea403ba7a 100644 --- a/Documentation/devicetree/bindings/leds/register-bit-led.txt +++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt @@ -32,7 +32,7 @@ syscon: syscon@10000000 { compatible = "arm,realview-pb1176-syscon", "syscon"; reg = <0x10000000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; @@ -40,7 +40,7 @@ syscon: syscon@10000000 { linux,default-trigger = "heartbeat"; default-state = "on"; }; - led@08.1 { + led@8.1 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x02>; @@ -48,7 +48,7 @@ syscon: syscon@10000000 { linux,default-trigger = "mmc0"; default-state = "off"; }; - led@08.2 { + led@8.2 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x04>; @@ -56,35 +56,35 @@ syscon: syscon@10000000 { linux,default-trigger = "cpu0"; default-state = "off"; }; - led@08.3 { + led@8.3 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x08>; label = "versatile:3"; default-state = "off"; }; - led@08.4 { + led@8.4 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x10>; label = "versatile:4"; default-state = "off"; }; - led@08.5 { + led@8.5 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x20>; label = "versatile:5"; default-state = "off"; }; - led@08.6 { + led@8.6 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x40>; label = "versatile:6"; default-state = "off"; }; - led@08.7 { + led@8.7 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x80>; diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt index b449d025049f..c3b55b3ede8a 100644 --- a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt +++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt @@ -29,7 +29,7 @@ Required properties: Example(K2G): ------------ - msgmgr: msgmgr@02a00000 { + msgmgr: msgmgr@2a00000 { compatible = "ti,k2g-message-manager"; #mbox-cells = <2>; reg-names = "queue_proxy_region", "queue_state_debug_region"; diff --git a/Documentation/devicetree/bindings/marvell.txt b/Documentation/devicetree/bindings/marvell.txt index ea2b16ced49b..7f722316458a 100644 --- a/Documentation/devicetree/bindings/marvell.txt +++ b/Documentation/devicetree/bindings/marvell.txt @@ -446,7 +446,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. that services interrupts for this device. Example Discovery CPU Error node: - cpu-error@0070 { + cpu-error@70 { compatible = "marvell,mv64360-cpu-error"; reg = <0x70 0x10 0x128 0x28>; interrupts = <3>; @@ -466,7 +466,7 @@ prefixed with the string "marvell,", for Marvell Technology Group Ltd. that services interrupts for this device. Example Discovery SRAM Controller node: - sram-ctrl@0380 { + sram-ctrl@380 { compatible = "marvell,mv64360-sram-ctrl"; reg = <0x380 0x80>; interrupts = <13>; diff --git a/Documentation/devicetree/bindings/media/cec-gpio.txt b/Documentation/devicetree/bindings/media/cec-gpio.txt new file mode 100644 index 000000000000..46a0bac8b3b9 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cec-gpio.txt @@ -0,0 +1,32 @@ +* HDMI CEC GPIO driver + +The HDMI CEC GPIO module supports CEC implementations where the CEC line +is hooked up to a pull-up GPIO line and - optionally - the HPD line is +hooked up to another GPIO line. + +Required properties: + - compatible: value must be "cec-gpio". + - cec-gpios: gpio that the CEC line is connected to. The line should be + tagged as open drain. + +If the CEC line is associated with an HDMI receiver/transmitter, then the +following property is also required: + + - hdmi-phandle - phandle to the HDMI controller, see also cec.txt. + +If the CEC line is not associated with an HDMI receiver/transmitter, then +the following property is optional: + + - hpd-gpios: gpio that the HPD line is connected to. + +Example for the Raspberry Pi 3 where the CEC line is connected to +pin 26 aka BCM7 aka CE1 on the GPIO pin header and the HPD line is +connected to pin 11 aka BCM17: + +#include <dt-bindings/gpio/gpio.h> + +cec-gpio { + compatible = "cec-gpio"; + cec-gpios = <&gpio 7 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + hpd-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt index 26ca25b6d264..0d4fdaedc6f1 100644 --- a/Documentation/devicetree/bindings/media/exynos5-gsc.txt +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -3,8 +3,11 @@ G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. Required properties: -- compatible: should be "samsung,exynos5-gsc" (for Exynos 5250, 5420 and - 5422 SoCs) or "samsung,exynos5433-gsc" (Exynos 5433) +- compatible: should be one of + "samsung,exynos5250-gsc" + "samsung,exynos5420-gsc" + "samsung,exynos5433-gsc" + "samsung,exynos5-gsc" (deprecated) - reg: should contain G-Scaler physical address location and length. - interrupts: should contain G-Scaler interrupt number @@ -15,7 +18,7 @@ Optional properties: Example: gsc_0: gsc@0x13e00000 { - compatible = "samsung,exynos5-gsc"; + compatible = "samsung,exynos5250-gsc"; reg = <0x13e00000 0x1000>; interrupts = <0 85 0>; }; diff --git a/Documentation/devicetree/bindings/media/i2c/imx274.txt b/Documentation/devicetree/bindings/media/i2c/imx274.txt new file mode 100644 index 000000000000..80f2e89568e1 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/imx274.txt @@ -0,0 +1,33 @@ +* Sony 1/2.5-Inch 8.51Mp CMOS Digital Image Sensor + +The Sony imx274 is a 1/2.5-inch CMOS active pixel digital image sensor with +an active array size of 3864H x 2202V. It is programmable through I2C +interface. The I2C address is fixed to 0x1a as per sensor data sheet. +Image data is sent through MIPI CSI-2, which is configured as 4 lanes +at 1440 Mbps. + + +Required Properties: +- compatible: value should be "sony,imx274" for imx274 sensor +- reg: I2C bus address of the device + +Optional Properties: +- reset-gpios: Sensor reset GPIO + +The imx274 device node should contain one 'port' child node with +an 'endpoint' subnode. For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + sensor@1a { + compatible = "sony,imx274"; + reg = <0x1a>; + #address-cells = <1>; + #size-cells = <0>; + reset-gpios = <&gpio_sensor 0 0>; + port { + sensor_out: endpoint { + remote-endpoint = <&csiss_in>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt index 855e1faf73e2..33f10a94c381 100644 --- a/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt +++ b/Documentation/devicetree/bindings/media/i2c/nokia,smia.txt @@ -27,6 +27,8 @@ Optional properties - nokia,nvm-size: The size of the NVM, in bytes. If the size is not given, the NVM contents will not be read. - reset-gpios: XSHUTDOWN GPIO +- flash-leds: See ../video-interfaces.txt +- lens-focus: See ../video-interfaces.txt Endpoint node mandatory properties diff --git a/Documentation/devicetree/bindings/media/i2c/tc358743.txt b/Documentation/devicetree/bindings/media/i2c/tc358743.txt index 5218921629ed..49f8bcc2ea4d 100644 --- a/Documentation/devicetree/bindings/media/i2c/tc358743.txt +++ b/Documentation/devicetree/bindings/media/i2c/tc358743.txt @@ -27,7 +27,7 @@ Documentation/devicetree/bindings/media/video-interfaces.txt. Example: - tc358743@0f { + tc358743@f { compatible = "toshiba,tc358743"; reg = <0x0f>; clocks = <&hdmi_osc>; diff --git a/Documentation/devicetree/bindings/media/img-ir-rev1.txt b/Documentation/devicetree/bindings/media/img-ir-rev1.txt index 5434ce61b925..ed9ec52b77e0 100644 --- a/Documentation/devicetree/bindings/media/img-ir-rev1.txt +++ b/Documentation/devicetree/bindings/media/img-ir-rev1.txt @@ -25,7 +25,7 @@ Optional properties: Example: - ir@02006200 { + ir@2006200 { compatible = "img,ir-rev1"; reg = <0x02006200 0x100>; interrupts = <29 4>; diff --git a/Documentation/devicetree/bindings/media/renesas,vsp1.txt b/Documentation/devicetree/bindings/media/renesas,vsp1.txt index 9b695bcbf219..16427017cb45 100644 --- a/Documentation/devicetree/bindings/media/renesas,vsp1.txt +++ b/Documentation/devicetree/bindings/media/renesas,vsp1.txt @@ -22,7 +22,7 @@ Optional properties: Example: R8A7790 (R-Car H2) VSP1-S node - vsp1@fe928000 { + vsp@fe928000 { compatible = "renesas,vsp1"; reg = <0 0xfe928000 0 0x8000>; interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/media/rockchip-rga.txt b/Documentation/devicetree/bindings/media/rockchip-rga.txt new file mode 100644 index 000000000000..fd5276abfad6 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rockchip-rga.txt @@ -0,0 +1,33 @@ +device-tree bindings for rockchip 2D raster graphic acceleration controller (RGA) + +RGA is a standalone 2D raster graphic acceleration unit. It accelerates 2D +graphics operations, such as point/line drawing, image scaling, rotation, +BitBLT, alpha blending and image blur/sharpness. + +Required properties: +- compatible: value should be one of the following + "rockchip,rk3288-rga"; + "rockchip,rk3399-rga"; + +- interrupts: RGA interrupt specifier. + +- clocks: phandle to RGA sclk/hclk/aclk clocks + +- clock-names: should be "aclk", "hclk" and "sclk" + +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: should be "core", "axi" and "ahb" + +Example: +SoC-specific DT entry: + rga: rga@ff680000 { + compatible = "rockchip,rk3399-rga"; + reg = <0xff680000 0x10000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA_CORE>; + clock-names = "aclk", "hclk", "sclk"; + + resets = <&cru SRST_RGA_CORE>, <&cru SRST_A_RGA>, <&cru SRST_H_RGA>; + reset-names = "core, "axi", "ahb"; + }; diff --git a/Documentation/devicetree/bindings/media/stih-cec.txt b/Documentation/devicetree/bindings/media/stih-cec.txt index 8be2a040c6c6..ece0832fdeaf 100644 --- a/Documentation/devicetree/bindings/media/stih-cec.txt +++ b/Documentation/devicetree/bindings/media/stih-cec.txt @@ -13,7 +13,7 @@ Required properties: Example for STIH407: -sti-cec@094a087c { +sti-cec@94a087c { compatible = "st,stih-cec"; reg = <0x94a087c 0x64>; clocks = <&clk_sysin>; diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt index 6af3fc210ecc..c7888d6f6408 100644 --- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt +++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt @@ -50,7 +50,7 @@ Example: /* stih410 SoC b2120 + b2004a + stv0367-pll(NIMB) + stv0367-tda18212 (NIMA) DT example) */ - c8sectpfe@08a20000 { + c8sectpfe@8a20000 { compatible = "st,stih407-c8sectpfe"; reg = <0x08a20000 0x10000>, <0x08a00000 0x4000>; reg-names = "stfe", "stfe-ram"; diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt index 302a0b183cb8..91648c569b1e 100644 --- a/Documentation/devicetree/bindings/media/sunxi-ir.txt +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt @@ -14,7 +14,7 @@ Optional properties: Example: -ir0: ir@01c21800 { +ir0: ir@1c21800 { compatible = "allwinner,sun4i-a10-ir"; clocks = <&apb0_gates 6>, <&ir0_clk>; clock-names = "apb", "ir"; diff --git a/Documentation/devicetree/bindings/media/tango-ir.txt b/Documentation/devicetree/bindings/media/tango-ir.txt new file mode 100644 index 000000000000..a9f00c2bf897 --- /dev/null +++ b/Documentation/devicetree/bindings/media/tango-ir.txt @@ -0,0 +1,21 @@ +Sigma Designs Tango IR NEC/RC-5/RC-6 decoder (SMP86xx and SMP87xx) + +Required properties: + +- compatible: "sigma,smp8642-ir" +- reg: address/size of NEC+RC5 area, address/size of RC6 area +- interrupts: spec for IR IRQ +- clocks: spec for IR clock (typically the crystal oscillator) + +Optional properties: + +- linux,rc-map-name: see Documentation/devicetree/bindings/media/rc.txt + +Example: + + ir@10518 { + compatible = "sigma,smp8642-ir"; + reg = <0x10518 0x18>, <0x105e0 0x1c>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + clocks = <&xtal>; + }; diff --git a/Documentation/devicetree/bindings/media/tegra-cec.txt b/Documentation/devicetree/bindings/media/tegra-cec.txt new file mode 100644 index 000000000000..c503f06f3b84 --- /dev/null +++ b/Documentation/devicetree/bindings/media/tegra-cec.txt @@ -0,0 +1,27 @@ +* Tegra HDMI CEC hardware + +The HDMI CEC module is present in Tegra SoCs and its purpose is to +handle communication between HDMI connected devices over the CEC bus. + +Required properties: + - compatible : value should be one of the following: + "nvidia,tegra114-cec" + "nvidia,tegra124-cec" + "nvidia,tegra210-cec" + - reg : Physical base address of the IP registers and length of memory + mapped region. + - interrupts : HDMI CEC interrupt number to the CPU. + - clocks : from common clock binding: handle to HDMI CEC clock. + - clock-names : from common clock binding: must contain "cec", + corresponding to the entry in the clocks property. + - hdmi-phandle : phandle to the HDMI controller, see also cec.txt. + +Example: + +cec@70015000 { + compatible = "nvidia,tegra124-cec"; + reg = <0x0 0x70015000 0x0 0x00001000>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_CEC>; + clock-names = "cec"; +}; diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt index 852041a7480c..3994b0143dd1 100644 --- a/Documentation/devicetree/bindings/media/video-interfaces.txt +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt @@ -55,6 +55,15 @@ divided into two separate ITU-R BT.656 8-bit busses. In such case bus-width and data-shift properties can be used to assign physical data lines to each endpoint node (logical bus). +Documenting bindings for devices +-------------------------------- + +All required and optional bindings the device supports shall be explicitly +documented in device DT binding documentation. This also includes port and +endpoint nodes for the device, including unit-addresses and reg properties where +relevant. + +Please also see Documentation/devicetree/bindings/graph.txt . Required properties ------------------- @@ -67,6 +76,16 @@ are required in a relevant parent node: identifier, should be 1. - #size-cells : should be zero. + +Optional properties +------------------- + +- flash-leds: An array of phandles, each referring to a flash LED, a sub-node + of the LED driver device node. + +- lens-focus: A phandle to the node of the focus lens controller. + + Optional endpoint properties ---------------------------- @@ -99,7 +118,10 @@ Optional endpoint properties determines the logical lane number, while the value of an entry indicates physical lane, e.g. for 2-lane MIPI CSI-2 bus we could have "data-lanes = <1 2>;", assuming the clock lane is on hardware lane 0. - This property is valid for serial busses only (e.g. MIPI CSI-2). + If the hardware does not support lane reordering, monotonically + incremented values shall be used from 0 or 1 onwards, depending on + whether or not there is also a clock lane. This property is valid for + serial busses only (e.g. MIPI CSI-2). - clock-lanes: an array of physical clock lane indexes. Position of an entry determines the logical lane number, while the value of an entry indicates physical lane, e.g. for a MIPI CSI-2 bus we could have "clock-lanes = <0>;", diff --git a/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt new file mode 100644 index 000000000000..82d923ef413f --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/brcm,dpfe-cpu.txt @@ -0,0 +1,27 @@ +DDR PHY Front End (DPFE) for Broadcom STB +========================================= + +DPFE and the DPFE firmware provide an interface for the host CPU to +communicate with the DCPU, which resides inside the DDR PHY. + +There are three memory regions for interacting with the DCPU. These are +specified in a single reg property. + +Required properties: + - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu" + or "brcm,dpfe-cpu" + - reg: must reference three register ranges + - start address and length of the DCPU register space + - start address and length of the DCPU data memory space + - start address and length of the DCPU instruction memory space + - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem"; + they must be in the same order as the register declarations + +Example: + dpfe_cpu0: dpfe-cpu@f1132000 { + compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu"; + reg = <0xf1132000 0x180 + 0xf1134000 0x1000 + 0xf1138000 0x4000>; + reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem"; + }; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt index 0db60470ebb6..fd823d6091b2 100644 --- a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -7,8 +7,10 @@ of the EMIF IP and memory parts attached to it. Required properties: - compatible : Should be of the form "ti,emif-<ip-rev>" where <ip-rev> - is the IP revision of the specific EMIF instance. - For am437x should be ti,emif-am4372. + is the IP revision of the specific EMIF instance. For newer controllers, + compatible should be one of the following: + "ti,emif-am3352" + "ti,emif-am4372" - phy-type : <u32> indicating the DDR phy type. Following are the allowed values diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index b37bdde5cfda..bdd017686ea5 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -65,45 +65,6 @@ Optional properties: a value that is out of range for a 16 bit register then the chip default will be used. If present exactly five values must be specified. - - wlf,inmode : A list of INn_MODE register values, where n is the number - of input signals. Valid values are 0 (Differential), 1 (Single-ended) and - 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. - If present, values must be specified less than or equal to the number of - input signals. If values less than the number of input signals, elements - that have not been specified are set to 0 by default. Entries are: - <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) - <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) - - wlf,out-mono : A list of boolean values indicating whether each output is - mono or stereo. Position within the list indicates the output affected - (eg. First entry in the list corresponds to output 1). A non-zero value - indicates a mono output. If present, the number of values should be less - than or equal to the number of outputs, if less values are supplied the - additional outputs will be treated as stereo. - - - wlf,dmic-ref : DMIC reference voltage source for each input, can be - selected from either MICVDD or one of the MICBIAS's, defines - (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If - present, the number of values should be less than or equal to the - number of inputs, unspecified inputs will use the chip default. - - - wlf,max-channels-clocked : The maximum number of channels to be clocked on - each AIF, useful for I2S systems with multiple data lines being mastered. - Specify one cell for each AIF to be configured, specify zero for AIFs that - should be handled normally. - If present, number of cells must be less than or equal to the number of - AIFs. If less than the number of AIFs, for cells that have not been - specified the corresponding AIFs will be treated as default setting. - - - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). - See the datasheet for values. - The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, - wm8998, wm1814) - - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if they are being externally supplied. As covered in Documentation/devicetree/bindings/regulator/regulator.txt @@ -112,6 +73,7 @@ Optional properties: Also see child specific device properties: Regulator - ../regulator/arizona-regulator.txt Extcon - ../extcon/extcon-arizona.txt + Sound - ../sound/arizona.txt Example: diff --git a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt index 4fc5b83726d6..ce8cf0ec6279 100644 --- a/Documentation/devicetree/bindings/mfd/aspeed-scu.txt +++ b/Documentation/devicetree/bindings/mfd/aspeed-scu.txt @@ -9,10 +9,16 @@ Required properties: "aspeed,g5-scu", "syscon", "simple-mfd" - reg: contains the offset and length of the SCU memory region +- #clock-cells: should be set to <1> - the system controller is also a + clock provider +- #reset-cells: should be set to <1> - the system controller is also a + reset line provider Example: syscon: syscon@1e6e2000 { compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt new file mode 100644 index 000000000000..82f82e069563 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-cdru.txt @@ -0,0 +1,16 @@ +Broadcom iProc Chip Device Resource Unit (CDRU) + +Various Broadcom iProc SoCs have a set of registers that provide various +chip specific device and resource configurations. This node allows access to +these CDRU registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-cdru", "syscon" for Stingray +- reg: base address and range of the CDRU registers + +Example: + cdru: syscon@6641d000 { + compatible = "brcm,sr-cdru", "syscon"; + reg = <0 0x6641d000 0 0x400>; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt new file mode 100644 index 000000000000..4421e9771b8a --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,iproc-mhb.txt @@ -0,0 +1,18 @@ +Broadcom iProc Multi Host Bridge (MHB) + +Certain Broadcom iProc SoCs have a multi host bridge (MHB) block that controls +the connection and configuration of 1) internal PCIe serdes; 2) PCIe endpoint +interface; 3) access to the Nitro (network processing) engine + +This node allows access to these MHB registers via syscon. + +Required properties: +- compatible: should contain: + "brcm,sr-mhb", "syscon" for Stingray +- reg: base address and range of the MHB registers + +Example: + mhb: syscon@60401000 { + compatible = "brcm,sr-mhb", "syscon"; + reg = <0 0x60401000 0 0x38c>; + }; diff --git a/Documentation/devicetree/bindings/mfd/max77686.txt b/Documentation/devicetree/bindings/mfd/max77686.txt index 741e76688cf2..0f2587fa42cb 100644 --- a/Documentation/devicetree/bindings/mfd/max77686.txt +++ b/Documentation/devicetree/bindings/mfd/max77686.txt @@ -19,7 +19,7 @@ Required properties: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt b/Documentation/devicetree/bindings/mfd/max77693.txt index 6a1ae3a2b77f..e6754974a745 100644 --- a/Documentation/devicetree/bindings/mfd/max77693.txt +++ b/Documentation/devicetree/bindings/mfd/max77693.txt @@ -127,6 +127,12 @@ Required properties for the LED child node: Optional properties for the LED child node: - label : see Documentation/devicetree/bindings/leds/common.txt +Optional nodes: +- max77693-muic : + Node used only by extcon consumers. + Required properties: + - compatible : "maxim,max77693-muic" + Example: #include <dt-bindings/leds/common.h> diff --git a/Documentation/devicetree/bindings/mfd/max77802.txt b/Documentation/devicetree/bindings/mfd/max77802.txt index 51fc1a60caa5..f2f3fe75901c 100644 --- a/Documentation/devicetree/bindings/mfd/max77802.txt +++ b/Documentation/devicetree/bindings/mfd/max77802.txt @@ -18,7 +18,7 @@ Required properties: Example: - max77802: pmic@09 { + max77802: pmic@9 { compatible = "maxim,max77802"; interrupt-parent = <&intc>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 39ba4146769d..ac235fe385fc 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -113,7 +113,6 @@ MC13892 regulators: Examples: ecspi@70010000 { /* ECSPI1 */ - fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ <&gpio4 25 0>; /* GPIO4_25 */ diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt index bcb6abb9d413..336c0495c8a3 100644 --- a/Documentation/devicetree/bindings/mfd/mfd.txt +++ b/Documentation/devicetree/bindings/mfd/mfd.txt @@ -41,7 +41,7 @@ foo@1000 { compatible = "syscon", "simple-mfd"; reg = <0x01000 0x1000>; - led@08.0 { + led@8.0 { compatible = "register-bit-led"; offset = <0x08>; mask = <0x01>; diff --git a/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt new file mode 100644 index 000000000000..21b9a897fca5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/sprd,sc27xx-pmic.txt @@ -0,0 +1,40 @@ +Spreadtrum SC27xx Power Management Integrated Circuit (PMIC) + +The Spreadtrum SC27xx series PMICs contain SC2720, SC2721, SC2723, SC2730 +and SC2731. The Spreadtrum PMIC belonging to SC27xx series integrates all +mobile handset power management, audio codec, battery management and user +interface support function in a single chip. It has 6 major functional +blocks: +- DCDCs to support CPU, memory. +- LDOs to support both internal and external requirement. +- Battery management system, such as charger, fuel gauge. +- Audio codec. +- User interface function, such as indicator, flash LED and so on. +- IC level interface, such as power on/off control, RTC and typec and so on. + +Required properties: +- compatible: Should be one of the following: + "sprd,sc2720" + "sprd,sc2721" + "sprd,sc2723" + "sprd,sc2730" + "sprd,sc2731" +- reg: The address of the device chip select, should be 0. +- spi-max-frequency: Typically set to 26000000. +- interrupts: The interrupt line the device is connected to. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: The number of cells to describe an PMIC IRQ, must be 2. +- #address-cells: Child device offset number of cells, must be 1. +- #size-cells: Child device size number of cells, must be 0. + +Example: +pmic@0 { + compatible = "sprd,sc2731"; + reg = <0>; + spi-max-frequency = <26000000>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + #address-cells = <1>; + #size-cells = <0>; +}; diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt index badff3611a98..86dd8191b04c 100644 --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt @@ -10,7 +10,7 @@ Required properties: - #io-channel-cells: shall be 0, Example: - ths: ths@01c25000 { + ths: ths@1c25000 { compatible = "allwinner,sun8i-a33-ths"; reg = <0x01c25000 0x100>; #thermal-sensor-cells = <0>; @@ -47,7 +47,7 @@ Optional properties: Example: - rtp: rtp@01c25000 { + rtp: rtp@1c25000 { compatible = "allwinner,sun4i-a10-ts"; reg = <0x01c25000 0x100>; interrupts = <29>; diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index 03c5a551da55..dd2c06540485 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -15,7 +15,7 @@ The prcm node may contain several subdevices definitions: Example: - prcm: prcm@01f01400 { + prcm: prcm@1f01400 { compatible = "allwinner,sun6i-a31-prcm"; reg = <0x01f01400 0x200>; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt index 408f768686f1..8b92d4576c42 100644 --- a/Documentation/devicetree/bindings/mfd/syscon.txt +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -18,7 +18,7 @@ Optional property: performed on the device. Examples: -gpr: iomuxc-gpr@020e0000 { +gpr: iomuxc-gpr@20e0000 { compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; reg = <0x020e0000 0x38>; }; diff --git a/Documentation/devicetree/bindings/mips/brcm/soc.txt b/Documentation/devicetree/bindings/mips/brcm/soc.txt index e4e1cd91fb1f..356c29789cf5 100644 --- a/Documentation/devicetree/bindings/mips/brcm/soc.txt +++ b/Documentation/devicetree/bindings/mips/brcm/soc.txt @@ -11,3 +11,156 @@ Required properties: The experimental -viper variants are for running Linux on the 3384's BMIPS4355 cable modem CPU instead of the BMIPS5000 application processor. + +Power management +---------------- + +For power management (particularly, S2/S3/S5 system suspend), the following SoC +components are needed: + += Always-On control block (AON CTRL) + +This hardware provides control registers for the "always-on" (even in low-power +modes) hardware, such as the Power Management State Machine (PMSM). + +Required properties: +- compatible : should be one of + "brcm,bcm7425-aon-ctrl" + "brcm,bcm7429-aon-ctrl" + "brcm,bcm7435-aon-ctrl" and + "brcm,brcmstb-aon-ctrl" +- reg : the register start and length for the AON CTRL block + +Example: + +syscon@410000 { + compatible = "brcm,bcm7425-aon-ctrl", "brcm,brcmstb-aon-ctrl"; + reg = <0x410000 0x400>; +}; + += Memory controllers + +A Broadcom STB SoC typically has a number of independent memory controllers, +each of which may have several associated hardware blocks, which are versioned +independently (control registers, DDR PHYs, etc.). One might consider +describing these controllers as a parent "memory controllers" block, which +contains N sub-nodes (one for each controller in the system), each of which is +associated with a number of hardware register resources (e.g., its PHY. + +== MEMC (MEMory Controller) + +Represents a single memory controller instance. + +Required properties: +- compatible : should contain "brcm,brcmstb-memc" and "simple-bus" +- ranges : should contain the child address in the parent address + space, must be 0 here, and the register start and length of + the entire memory controller (including all sub nodes: DDR PHY, + arbiter, etc.) +- #address-cells : must be 1 +- #size-cells : must be 1 + +Example: + + memory-controller@0 { + compatible = "brcm,brcmstb-memc", "simple-bus"; + ranges = <0x0 0x0 0xa000>; + #address-cells = <1>; + #size-cells = <1>; + + memc-arb@1000 { + ... + }; + + memc-ddr@2000 { + ... + }; + + ddr-phy@6000 { + ... + }; + }; + +Should contain subnodes for any of the following relevant hardware resources: + +== DDR PHY control + +Control registers for this memory controller's DDR PHY. + +Required properties: +- compatible : should contain one of these + "brcm,brcmstb-ddr-phy-v64.5" + "brcm,brcmstb-ddr-phy" + +- reg : the DDR PHY register range and length + +Example: + + ddr-phy@6000 { + compatible = "brcm,brcmstb-ddr-phy-v64.5"; + reg = <0x6000 0xc8>; + }; + +== DDR memory controller sequencer + +Control registers for this memory controller's DDR memory sequencer + +Required properties: +- compatible : should contain one of these + "brcm,bcm7425-memc-ddr" + "brcm,bcm7429-memc-ddr" + "brcm,bcm7435-memc-ddr" and + "brcm,brcmstb-memc-ddr" + +- reg : the DDR sequencer register range and length + +Example: + + memc-ddr@2000 { + compatible = "brcm,bcm7425-memc-ddr", "brcm,brcmstb-memc-ddr"; + reg = <0x2000 0x300>; + }; + +== MEMC Arbiter + +The memory controller arbiter is responsible for memory clients allocation +(bandwidth, priorities etc.) and needs to have its contents restored during +deep sleep states (S3). + +Required properties: + +- compatible : should contain one of these + "brcm,brcmstb-memc-arb-v10.0.0.0" + "brcm,brcmstb-memc-arb" + +- reg : the DDR Arbiter register range and length + +Example: + + memc-arb@1000 { + compatible = "brcm,brcmstb-memc-arb-v10.0.0.0"; + reg = <0x1000 0x248>; + }; + +== Timers + +The Broadcom STB chips contain a timer block with several general purpose +timers that can be used. + +Required properties: + +- compatible : should contain one of: + "brcm,bcm7425-timers" + "brcm,bcm7429-timers" + "brcm,bcm7435-timers and + "brcm,brcmstb-timers" +- reg : the timers register range +- interrupts : the interrupt line for this timer block + +Example: + + timers: timer@4067c0 { + compatible = "brcm,bcm7425-timers", "brcm,brcmstb-timers"; + reg = <0x4067c0 0x40>; + interrupts = <&periph_intc 19>; + }; diff --git a/Documentation/devicetree/bindings/misc/ge-achc.txt b/Documentation/devicetree/bindings/misc/ge-achc.txt new file mode 100644 index 000000000000..77df94d7a32f --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ge-achc.txt @@ -0,0 +1,26 @@ +* GE Healthcare USB Management Controller + +A device which handles data aquisition from compatible USB based peripherals. +SPI is used for device management. + +Note: This device does not expose the peripherals as USB devices. + +Required properties: + +- compatible : Should be "ge,achc" + +Required SPI properties: + +- reg : Should be address of the device chip select within + the controller. + +- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be + 1MHz for the GE ACHC. + +Example: + +spidev0: spi@0 { + compatible = "ge,achc"; + reg = <0>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt new file mode 100644 index 000000000000..8765c605e6bc --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/amlogic,meson-mx-sdio.txt @@ -0,0 +1,54 @@ +* Amlogic Meson6, Meson8 and Meson8b SDIO/MMC controller + +The highspeed MMC host controller on Amlogic SoCs provides an interface +for MMC, SD, SDIO and SDHC types of memory cards. + +Supported maximum speeds are the ones of the eMMC standard 4.41 as well +as the speed of SD standard 2.0. + +The hardware provides an internal "mux" which allows up to three slots +to be controlled. Only one slot can be accessed at a time. + +Required properties: + - compatible : must be one of + - "amlogic,meson8-sdio" + - "amlogic,meson8b-sdio" + along with the generic "amlogic,meson-mx-sdio" + - reg : mmc controller base registers + - interrupts : mmc controller interrupt + - #address-cells : must be 1 + - size-cells : must be 0 + - clocks : phandle to clock providers + - clock-names : must contain "core" and "clkin" + +Required child nodes: +A node for each slot provided by the MMC controller is required. +NOTE: due to a driver limitation currently only one slot (= child node) + is supported! + +Required properties on each child node (= slot): + - compatible : must be "mmc-slot" (see mmc.txt within this directory) + - reg : the slot (or "port") ID + +Optional properties on each child node (= slot): + - bus-width : must be 1 or 4 (8-bit bus is not supported) + - for cd and all other additional generic mmc parameters + please refer to mmc.txt within this directory + +Examples: + mmc@c1108c20 { + compatible = "amlogic,meson8-sdio", "amlogic,meson-mx-sdio"; + reg = <0xc1108c20 0x20>; + interrupts = <0 28 1>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clkc CLKID_SDIO>, <&clkc CLKID_CLK81>; + clock-names = "core", "clkin"; + + slot@1 { + compatible = "mmc-slot"; + reg = <1>; + + bus-width = <4>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt index b878a1e305af..ed1456f5c94d 100644 --- a/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/marvell,xenon-sdhci.txt @@ -16,11 +16,13 @@ Required Properties: - clocks: Array of clocks required for SDHC. - Require at least input clock for Xenon IP core. + Require at least input clock for Xenon IP core. For Armada AP806 and + CP110, the AXI clock is also mandatory. - clock-names: Array of names corresponding to clocks property. The input clock for Xenon IP core should be named as "core". + The input clock for the AXI bus must be named as "axi". - reg: * For "marvell,armada-3700-sdhci", two register areas. @@ -106,8 +108,8 @@ Example: compatible = "marvell,armada-ap806-sdhci"; reg = <0xaa0000 0x1000>; interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH> - clocks = <&emmc_clk>; - clock-names = "core"; + clocks = <&emmc_clk>,<&axi_clk>; + clock-names = "core", "axi"; bus-width = <4>; marvell,xenon-phy-slow-mode; marvell,xenon-tun-count = <11>; @@ -126,8 +128,8 @@ Example: interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH> vqmmc-supply = <&sd_vqmmc_regulator>; vmmc-supply = <&sd_vmmc_regulator>; - clocks = <&sdclk>; - clock-names = "core"; + clocks = <&sdclk>, <&axi_clk>; + clock-names = "core", "axi"; bus-width = <4>; marvell,xenon-tun-count = <9>; }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index b32ade645ad9..fb11ae8b3b72 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -53,6 +53,9 @@ Optional properties: - no-sdio: controller is limited to send sdio cmd during initialization - no-sd: controller is limited to send sd cmd during initialization - no-mmc: controller is limited to send mmc cmd during initialization +- fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type. + The value <n> is the driver type as specified in the eMMC specification + (table 206 in spec version 5.1). *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" @@ -143,7 +146,7 @@ sdhci@ab000000 { Example with sdio function subnode: -mmc3: mmc@01c12000 { +mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt index 4182ea36ca5b..72d2a734ab85 100644 --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -7,10 +7,18 @@ This file documents differences between the core properties in mmc.txt and the properties used by the msdc driver. Required properties: -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc" +- compatible: value should be either of the following. + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135 + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173 + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701 + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712 +- reg: physical base address of the controller and length - interrupts: Should contain MSDC interrupt number -- clocks: MSDC source clock, HCLK -- clock-names: "source", "hclk" +- clocks: Should contain phandle for the clock feeding the MMC controller +- clock-names: Should contain the following: + "source" - source clock (required) + "hclk" - HCLK which used for host (required) + "source_cg" - independent source clock gate (required for MT2712) - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl @@ -30,6 +38,10 @@ Optional properties: - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection If present,HS400 command responses are sampled on rising edges. If not present,HS400 command responses are sampled on falling edges. +- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc + error caused by stop clock(fifo full) + Valid range = [0:0x7]. if not present, default value is 0. + applied to compatible "mediatek,mt2701-mmc". Examples: mmc0: mmc@11230000 { diff --git a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt index de2c53cff4f1..3ee9263adf73 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-fujitsu.txt @@ -15,6 +15,8 @@ Required properties: Optional properties: - vqmmc-supply: phandle to the regulator device tree node, mentioned as the VCCQ/VDD_IO supply in the eMMC/SD specs. +- fujitsu,cmd-dat-delay-select: boolean property indicating that this host + requires the CMD_DAT_DELAY control to be enabled. Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 0576264eab5e..bfdcdc4ccdff 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -18,6 +18,8 @@ Required properties: "core" - SDC MMC clock (MCLK) (required) "bus" - SDCC bus voter clock (optional) "xo" - TCXO clock (optional) + "cal" - reference clock for RCLK delay calibration (optional) + "sleep" - sleep clock for RCLK delay calibration (optional) Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-omap.txt b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt new file mode 100644 index 000000000000..51775a372c06 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-omap.txt @@ -0,0 +1,16 @@ +* TI OMAP SDHCI Controller + +Refer to mmc.txt for standard MMC bindings. + +Required properties: +- compatible: Should be "ti,dra7-sdhci" for DRA7 and DRA72 controllers +- ti,hwmods: Must be "mmc<n>", <n> is controller instance starting 1 + +Example: + mmc1: mmc@4809c000 { + compatible = "ti,dra7-sdhci"; + reg = <0x4809c000 0x400>; + ti,hwmods = "mmc1"; + bus-width = <4>; + vmmc-supply = <&vmmc>; /* phandle to regulator node */ + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt index e35645598315..6b3d40ca395e 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -74,7 +74,7 @@ mmc0: sdhci@fe81e000 { /* Example SD stih407 family configuration */ -mmc1: sdhci@09080000 { +mmc1: sdhci@9080000 { compatible = "st,sdhci-stih407", "st,sdhci"; reg = <0x09080000 0x7ff>; reg-names = "mmc"; @@ -90,7 +90,7 @@ mmc1: sdhci@09080000 { /* Example eMMC stih407 family configuration */ -mmc0: sdhci@09060000 { +mmc0: sdhci@9060000 { compatible = "st,sdhci-stih407", "st,sdhci"; reg = <0x09060000 0x7ff>, <0x9061008 0x20>; reg-names = "mmc", "top-mmc-delay"; diff --git a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt index 63b57e2a10fb..132e0007d7d6 100644 --- a/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/sunxi-mmc.txt @@ -29,7 +29,7 @@ Optional properties: Examples: - Within .dtsi: - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { compatible = "allwinner,sun5i-a13-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ahb_gates 8>, <&mmc0_clk>, <&mmc0_output_clk>, <&mmc0_sample_clk>; @@ -39,7 +39,7 @@ Examples: }; - Within dts: - mmc0: mmc@01c0f000 { + mmc0: mmc@1c0f000 { pinctrl-names = "default", "default"; pinctrl-0 = <&mmc0_pins_a>; pinctrl-1 = <&mmc0_cd_pin_reference_design>; diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 54ef642f23a0..3c6762430fd9 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -10,7 +10,7 @@ described in mmc.txt, can be used. Additionally the following tmio_mmc-specific optional bindings can be used. Required properties: -- compatible: "renesas,sdhi-shmobile" - a generic sh-mobile SDHI unit +- compatible: should contain one or more of the following: "renesas,sdhi-sh73a0" - SDHI IP on SH73A0 SoC "renesas,sdhi-r7s72100" - SDHI IP on R7S72100 SoC "renesas,sdhi-r8a73a4" - SDHI IP on R8A73A4 SoC @@ -26,6 +26,16 @@ Required properties: "renesas,sdhi-r8a7794" - SDHI IP on R8A7794 SoC "renesas,sdhi-r8a7795" - SDHI IP on R8A7795 SoC "renesas,sdhi-r8a7796" - SDHI IP on R8A7796 SoC + "renesas,sdhi-shmobile" - a generic sh-mobile SDHI controller + "renesas,rcar-gen1-sdhi" - a generic R-Car Gen1 SDHI controller + "renesas,rcar-gen2-sdhi" - a generic R-Car Gen2 or RZ/G1 + SDHI controller + "renesas,rcar-gen3-sdhi" - a generic R-Car Gen3 SDHI controller + + + When compatible with the generic version, nodes must list + the SoC-specific version corresponding to the platform + first followed by the generic version. - clocks: Most controllers only have 1 clock source per channel. However, on some variations of this controller, the internal card detection @@ -43,3 +53,61 @@ Optional properties: - pinctrl-names: should be "default", "state_uhs" - pinctrl-0: should contain default/high speed pin ctrl - pinctrl-1: should contain uhs mode pin ctrl + +Example: R8A7790 (R-Car H2) SDHI controller nodes + + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee100000 0 0x328>; + interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 314>; + dmas = <&dmac0 0xcd>, <&dmac0 0xce>, + <&dmac1 0xcd>, <&dmac1 0xce>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 314>; + status = "disabled"; + }; + + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee120000 0 0x328>; + interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 313>; + dmas = <&dmac0 0xc9>, <&dmac0 0xca>, + <&dmac1 0xc9>, <&dmac1 0xca>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <195000000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 313>; + status = "disabled"; + }; + + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee140000 0 0x100>; + interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 312>; + dmas = <&dmac0 0xc1>, <&dmac0 0xc2>, + <&dmac1 0xc1>, <&dmac1 0xc2>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 312>; + status = "disabled"; + }; + + sdhi3: sd@ee160000 { + compatible = "renesas,sdhi-r8a7790", "renesas,rcar-gen2-sdhi"; + reg = <0 0xee160000 0 0x100>; + interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 311>; + dmas = <&dmac0 0xd3>, <&dmac0 0xd4>, + <&dmac1 0xd3>, <&dmac1 0xd4>; + dma-names = "tx", "rx", "tx", "rx"; + max-frequency = <97500000>; + power-domains = <&sysc R8A7790_PD_ALWAYS_ON>; + resets = <&cpg 311>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt index f248056da24c..bb2075df9b38 100644 --- a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt @@ -1,7 +1,9 @@ * Cadence Quad SPI controller Required properties: -- compatible : Should be "cdns,qspi-nor". +- compatible : should be one of the following: + Generic default - "cdns,qspi-nor". + For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". - reg : Contains two entries, each of which is a tuple consisting of a physical address and length. The first entry is the address and length of the controller register set. The second entry is the @@ -14,6 +16,9 @@ Required properties: Optional properties: - cdns,is-decoded-cs : Flag to indicate whether decoder is used or not. +- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch + the read data rather than the QSPI clock. Make sure that QSPI return + clock is populated on the board before using this property. Optional subnodes: Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional diff --git a/Documentation/devicetree/bindings/mtd/denali-nand.txt b/Documentation/devicetree/bindings/mtd/denali-nand.txt index 504291d2e5c2..0ee8edb60efc 100644 --- a/Documentation/devicetree/bindings/mtd/denali-nand.txt +++ b/Documentation/devicetree/bindings/mtd/denali-nand.txt @@ -29,7 +29,7 @@ nand: nand@ff900000 { #address-cells = <1>; #size-cells = <1>; compatible = "altr,socfpga-denali-nand"; - reg = <0xff900000 0x100000>, <0xffb80000 0x10000>; + reg = <0xff900000 0x20>, <0xffb80000 0x1000>; reg-names = "nand_data", "denali_reg"; interrupts = <0 144 4>; }; diff --git a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt index 9ce35af8507c..376fa2f50e6b 100644 --- a/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt +++ b/Documentation/devicetree/bindings/mtd/jedec,spi-nor.txt @@ -13,6 +13,8 @@ Required properties: at25df321a at25df641 at26df081a + en25s64 + mr25h128 mr25h256 mr25h10 mr25h40 @@ -31,6 +33,7 @@ Required properties: s25fl008k s25fl064k sst25vf040b + sst25wf040b m25p40 m25p80 m25p16 diff --git a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt index 840f9405dcf0..56d3668e2c50 100644 --- a/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt +++ b/Documentation/devicetree/bindings/mtd/mtk-quadspi.txt @@ -1,13 +1,16 @@ * Serial NOR flash controller for MTK MT81xx (and similar) Required properties: -- compatible: The possible values are: - "mediatek,mt2701-nor" - "mediatek,mt7623-nor" +- compatible: For mt8173, compatible should be "mediatek,mt8173-nor", + and it's the fallback compatible for other Soc. + For every other SoC, should contain both the SoC-specific compatible + string and "mediatek,mt8173-nor". + The possible values are: + "mediatek,mt2701-nor", "mediatek,mt8173-nor" + "mediatek,mt2712-nor", "mediatek,mt8173-nor" + "mediatek,mt7622-nor", "mediatek,mt8173-nor" + "mediatek,mt7623-nor", "mediatek,mt8173-nor" "mediatek,mt8173-nor" - For mt8173, compatible should be "mediatek,mt8173-nor". - For every other SoC, should contain both the SoC-specific compatible string - and "mediatek,mt8173-nor". - reg: physical base address and length of the controller's register - clocks: the phandle of the clocks needed by the nor controller - clock-names: the names of the clocks diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt index d9b655f11048..d4ee4da58463 100644 --- a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -5,9 +5,13 @@ Required properties: - compatible: Should be set to one of the following: marvell,pxa3xx-nand marvell,armada370-nand + marvell,armada-8k-nand - reg: The register base for the controller - interrupts: The interrupt to map - #address-cells: Set to <1> if the node includes partitions + - marvell,system-controller: Set to retrieve the syscon node that handles + NAND controller related registers (only required + with marvell,armada-8k-nand compatible). Optional properties: diff --git a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt index a37c67bcb43b..5e13a5cdff03 100644 --- a/Documentation/devicetree/bindings/mtd/sunxi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/sunxi-nand.txt @@ -31,7 +31,7 @@ see Documentation/devicetree/bindings/mtd/nand.txt for generic bindings. Examples: -nfc: nand@01c03000 { +nfc: nand@1c03000 { compatible = "allwinner,sun4i-a10-nand"; reg = <0x01c03000 0x1000>; interrupts = <0 37 1>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt index 10640b17c866..e98118aef5f6 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-emac.txt @@ -10,7 +10,7 @@ Required properties: Example: -emac: ethernet@01c0b000 { +emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; reg = <0x01c0b000 0x1000>; interrupts = <55>; diff --git a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt index 4ec56413779d..ab5b8613b0ef 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun4i-mdio.txt @@ -9,7 +9,7 @@ Optional properties: - phy-supply: phandle to a regulator if the PHY needs one Example at the SoC level: -mdio@01c0b080 { +mdio@1c0b080 { compatible = "allwinner,sun4i-a10-mdio"; reg = <0x01c0b080 0x14>; #address-cells = <1>; @@ -18,7 +18,7 @@ mdio@01c0b080 { And at the board level: -mdio@01c0b080 { +mdio@1c0b080 { phy-supply = <®_emac_3v3>; phy0: ethernet-phy@0 { diff --git a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt index ea4d752389a2..8b3f953656e3 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt +++ b/Documentation/devicetree/bindings/net/allwinner,sun7i-a20-gmac.txt @@ -15,7 +15,7 @@ Optional properties: Examples: - gmac: ethernet@01c50000 { + gmac: ethernet@1c50000 { compatible = "allwinner,sun7i-a20-gmac"; reg = <0x01c50000 0x10000>, <0x01c20164 0x4>; diff --git a/Documentation/devicetree/bindings/net/bluetooth.txt b/Documentation/devicetree/bindings/net/bluetooth.txt new file mode 100644 index 000000000000..94797df751b8 --- /dev/null +++ b/Documentation/devicetree/bindings/net/bluetooth.txt @@ -0,0 +1,5 @@ +The following properties are common to the Bluetooth controllers: + +- local-bd-address: array of 6 bytes, specifies the BD address that was + uniquely assigned to the Bluetooth device, formatted with least significant + byte first (little-endian). diff --git a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt index 26c77d985faf..3956af1d30f3 100644 --- a/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt +++ b/Documentation/devicetree/bindings/net/brcm,bcmgenet.txt @@ -109,7 +109,7 @@ ethernet@f0ba0000 { reg = <0xf0ba0000 0xfc4c>; interrupts = <0x0 0x18 0x0>, <0x0 0x19 0x0>; - mdio@0e14 { + mdio@e14 { compatible = "brcm,genet-mdio-v4"; #address-cells = <0x1>; #size-cells = <0x0>; diff --git a/Documentation/devicetree/bindings/net/can/m_can.txt b/Documentation/devicetree/bindings/net/can/m_can.txt index 78138333ff7a..63e90421d029 100644 --- a/Documentation/devicetree/bindings/net/can/m_can.txt +++ b/Documentation/devicetree/bindings/net/can/m_can.txt @@ -45,7 +45,7 @@ Required properties: Example: SoC dtsi: -m_can1: can@020e8000 { +m_can1: can@20e8000 { compatible = "bosch,m_can"; reg = <0x020e8000 0x4000>, <0x02298000 0x4000>; reg-names = "m_can", "message_ram"; diff --git a/Documentation/devicetree/bindings/net/can/sun4i_can.txt b/Documentation/devicetree/bindings/net/can/sun4i_can.txt index 84ed1909df76..f69845e6feaf 100644 --- a/Documentation/devicetree/bindings/net/can/sun4i_can.txt +++ b/Documentation/devicetree/bindings/net/can/sun4i_can.txt @@ -19,7 +19,7 @@ SoC common .dtsi file: allwinner,pull = <0>; }; ... - can0: can@01c2bc00 { + can0: can@1c2bc00 { compatible = "allwinner,sun4i-a10-can"; reg = <0x01c2bc00 0x400>; interrupts = <0 26 4>; @@ -29,7 +29,7 @@ SoC common .dtsi file: Board specific .dts file: - can0: can@01c2bc00 { + can0: can@1c2bc00 { pinctrl-names = "default"; pinctrl-0 = <&can0_pins_a>; status = "okay"; diff --git a/Documentation/devicetree/bindings/net/dsa/lan9303.txt b/Documentation/devicetree/bindings/net/dsa/lan9303.txt index 4448d063ddf6..464d6bf87605 100644 --- a/Documentation/devicetree/bindings/net/dsa/lan9303.txt +++ b/Documentation/devicetree/bindings/net/dsa/lan9303.txt @@ -52,7 +52,7 @@ I2C managed mode: port@1 { /* external port 1 */ reg = <1>; - label = "lan1; + label = "lan1"; }; port@2 { /* external port 2 */ @@ -89,7 +89,7 @@ MDIO managed mode: port@1 { /* external port 1 */ reg = <1>; - label = "lan1; + label = "lan1"; }; port@2 { /* external port 2 */ diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt new file mode 100644 index 000000000000..3d6d5fa0c4d5 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -0,0 +1,207 @@ +* Allwinner sun8i GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: +- compatible: must be one of the following string: + "allwinner,sun8i-a83t-emac" + "allwinner,sun8i-h3-emac" + "allwinner,sun8i-v3s-emac" + "allwinner,sun50i-a64-emac" +- reg: address and length of the register for the device. +- interrupts: interrupt for the device +- interrupt-names: must be "macirq" +- clocks: A phandle to the reference clock for this device +- clock-names: must be "stmmaceth" +- resets: A phandle to the reset control for this device +- reset-names: must be "stmmaceth" +- phy-mode: See ethernet.txt +- phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 +- syscon: A phandle to the syscon of the SoC with one of the following + compatible string: + - allwinner,sun8i-h3-system-controller + - allwinner,sun8i-v3s-system-controller + - allwinner,sun50i-a64-system-controller + - allwinner,sun8i-a83t-system-controller + +Optional properties: +- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) +- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) +Both delay properties need to be a multiple of 100. They control the delay for +external PHY. + +Optional properties for the following compatibles: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": +- allwinner,leds-active-low: EPHY LEDs are active low + +Required child node of emac: +- mdio bus node: should be named mdio with compatible "snps,dwmac-mdio" + +Required properties of the mdio node: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +The device node referenced by "phy" or "phy-handle" must be a child node +of the mdio node. See phy.txt for the generic PHY bindings. + +The following compatibles require that the emac node have a mdio-mux child +node called "mdio-mux": + - "allwinner,sun8i-h3-emac" + - "allwinner,sun8i-v3s-emac": +Required properties for the mdio-mux node: + - compatible = "allwinner,sun8i-h3-mdio-mux" + - mdio-parent-bus: a phandle to EMAC mdio + - one child mdio for the integrated mdio with the compatible + "allwinner,sun8i-h3-mdio-internal" + - one child mdio for the external mdio if present (V3s have none) +Required properties for the mdio-mux children node: + - reg: 1 for internal MDIO bus, 2 for external MDIO bus + +The following compatibles require a PHY node representing the integrated +PHY, under the integrated MDIO bus node if an mdio-mux node is used: + - "allwinner,sun8i-h3-emac", + - "allwinner,sun8i-v3s-emac": + +Additional information regarding generic multiplexer properties can be found +at Documentation/devicetree/bindings/net/mdio-mux.txt + +Required properties of the integrated phy node: +- clocks: a phandle to the reference clock for the EPHY +- resets: a phandle to the reset control for the EPHY +- Must be a child of the integrated mdio + +Example with integrated PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + phy-is-integrated; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + }; + }; +}; + +Example with external PHY: +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + allwinner,leds-active-low; + + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + }; + + mdio-mux { + compatible = "allwinner,sun8i-h3-mdio-mux"; + #address-cells = <1>; + #size-cells = <0>; + + mdio-parent-bus = <&mdio>; + + int_mdio: mdio@1 { + compatible = "allwinner,sun8i-h3-mdio-internal"; + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; + ext_mdio: mdio@2 { + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }: + }; +}; + +Example with SoC without integrated PHY + +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-a83t-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + ext_rgmii_phy: ethernet-phy@1 { + reg = <1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 6f55bdd52f8a..f0dc94409107 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -34,6 +34,19 @@ Optional properties: - fsl,err006687-workaround-present: If present indicates that the system has the hardware workaround for ERR006687 applied and does not need a software workaround. + -interrupt-names: names of the interrupts listed in interrupts property in + the same order. The defaults if not specified are + __Number of interrupts__ __Default__ + 1 "int0" + 2 "int0", "pps" + 3 "int0", "int1", "int2" + 4 "int0", "int1", "int2", "pps" + The order may be changed as long as they correspond to the interrupts + property. Currently, only i.mx7 uses "int1" and "int2". They correspond to + tx/rx queues 1 and 2. "int0" will be used for queue 0 and ENET_MII interrupts. + For imx6sx, "int0" handles all 3 queues and ENET_MII. "pps" is for the pulse + per second interrupt associated with 1588 precision time protocol(PTP). + Optional subnodes: - mdio : specifies the mdio bus in the FEC, used as a container for phy nodes diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt index 7e2dad08a12e..1814fa13f6ab 100644 --- a/Documentation/devicetree/bindings/net/marvell-pp2.txt +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -21,8 +21,9 @@ Required properties: - main controller clock (for both armada-375-pp2 and armada-7k-pp2) - GOP clock (for both armada-375-pp2 and armada-7k-pp2) - MG clock (only for armada-7k-pp2) -- clock-names: names of used clocks, must be "pp_clk", "gop_clk" and - "mg_clk" (the latter only for armada-7k-pp2). + - AXI clock (only for armada-7k-pp2) +- clock-names: names of used clocks, must be "pp_clk", "gop_clk", "mg_clk" + and "axi_clk" (the 2 latter only for armada-7k-pp2). The ethernet ports are represented by subnodes. At least one port is required. @@ -78,8 +79,9 @@ Example for marvell,armada-7k-pp2: cpm_ethernet: ethernet@0 { compatible = "marvell,armada-7k-pp22"; reg = <0x0 0x100000>, <0x129000 0xb000>; - clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; - clock-names = "pp_clk", "gop_clk", "gp_clk"; + clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, + <&cpm_syscon0 1 5>, <&cpm_syscon0 1 18>; + clock-names = "pp_clk", "gop_clk", "gp_clk", "axi_clk"; eth0: eth0 { interrupts = <ICU_GRP_NSR 39 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt index 16723535e1aa..c902261893b9 100644 --- a/Documentation/devicetree/bindings/net/renesas,ravb.txt +++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt @@ -17,6 +17,8 @@ Required properties: - "renesas,etheravb-r8a7795" for the R8A7795 SoC. - "renesas,etheravb-r8a7796" for the R8A7796 SoC. + - "renesas,etheravb-r8a77970" for the R8A77970 SoC. + - "renesas,etheravb-r8a77995" for the R8A77995 SoC. - "renesas,etheravb-rcar-gen3" as a fallback for the above R-Car Gen3 devices. @@ -40,7 +42,7 @@ Optional properties: - interrupt-parent: the phandle for the interrupt controller that services interrupts for this device. - interrupt-names: A list of interrupt names. - For the R8A779[56] SoCs this property is mandatory; + For the R-Car Gen 3 SoCs this property is mandatory; it should include one entry per channel, named "ch%u", where %u is the channel number ranging from 0 to 24. For other SoCs this property is optional; if present diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt index 6af8eed1adeb..9c16ee2965a2 100644 --- a/Documentation/devicetree/bindings/net/rockchip-dwmac.txt +++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.txt @@ -4,6 +4,7 @@ The device node has following properties. Required properties: - compatible: should be "rockchip,<name>-gamc" + "rockchip,rk3128-gmac": found on RK312x SoCs "rockchip,rk3228-gmac": found on RK322x SoCs "rockchip,rk3288-gmac": found on RK3288 SoCs "rockchip,rk3328-gmac": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt index 0115c85a2425..5172799a7f1a 100644 --- a/Documentation/devicetree/bindings/net/sh_eth.txt +++ b/Documentation/devicetree/bindings/net/sh_eth.txt @@ -4,7 +4,8 @@ This file provides information on what the device node for the SH EtherMAC interface contains. Required properties: -- compatible: "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. +- compatible: Must contain one or more of the following: + "renesas,gether-r8a7740" if the device is a part of R8A7740 SoC. "renesas,ether-r8a7743" if the device is a part of R8A7743 SoC. "renesas,ether-r8a7745" if the device is a part of R8A7745 SoC. "renesas,ether-r8a7778" if the device is a part of R8A7778 SoC. @@ -14,6 +15,14 @@ Required properties: "renesas,ether-r8a7793" if the device is a part of R8A7793 SoC. "renesas,ether-r8a7794" if the device is a part of R8A7794 SoC. "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC. + "renesas,rcar-gen1-ether" for a generic R-Car Gen1 device. + "renesas,rcar-gen2-ether" for a generic R-Car Gen2 or RZ/G1 + device. + + When compatible with the generic version, nodes must list + the SoC-specific version corresponding to the platform + first followed by the generic version. + - reg: offset and length of (1) the E-DMAC/feLic register block (required), (2) the TSU register block (optional). - interrupts: interrupt specifier for the sole interrupt. @@ -36,7 +45,8 @@ Optional properties: Example (Lager board): ethernet@ee700000 { - compatible = "renesas,ether-r8a7790"; + compatible = "renesas,ether-r8a7790", + "renesas,rcar-gen2-ether"; reg = <0 0xee700000 0 0x400>; interrupt-parent = <&gic>; interrupts = <0 162 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index c3a7be6615c5..3a28a5d8857d 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -12,7 +12,7 @@ Required properties: Valid interrupt names are: - "macirq" (combined signal for various interrupt events) - "eth_wake_irq" (the interrupt to manage the remote wake-up packet detection) - - "eth_lpi" (the interrupt that occurs when Tx or Rx enters/exits LPI state) + - "eth_lpi" (the interrupt that occurs when Rx exits the LPI state) - phy-mode: See ethernet.txt file in the same directory. - snps,reset-gpio gpio number for phy reset. - snps,reset-active-low boolean flag to indicate if phy reset is active low. diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt index b2bd4704f859..86602f264dce 100644 --- a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -20,7 +20,7 @@ Optional properties: Example: -mmc3: mmc@01c12000 { +mmc3: mmc@1c12000 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt index ef06d061913c..d69543701d5d 100644 --- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt +++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt @@ -5,6 +5,7 @@ Required properties: "allwinner,sun4i-a10-sid" "allwinner,sun7i-a20-sid" "allwinner,sun8i-h3-sid" + "allwinner,sun50i-a64-sid" - reg: Should contain registers location and length @@ -13,13 +14,13 @@ Are child nodes of qfprom, bindings of which as described in bindings/nvmem/nvmem.txt Example for sun4i: - sid@01c23800 { + sid@1c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10> }; Example for sun7i: - sid@01c23800 { + sid@1c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200> }; diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt index fafd85bd67a6..e3298e18de26 100644 --- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt @@ -1,4 +1,4 @@ -= Amlogic eFuse device tree bindings = += Amlogic Meson GX eFuse device tree bindings = Required properties: - compatible: should be "amlogic,meson-gxbb-efuse" diff --git a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt new file mode 100644 index 000000000000..a3c63954a1a4 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt @@ -0,0 +1,22 @@ +Amlogic Meson6/Meson8/Meson8b efuse + +Required Properties: +- compatible: depending on the SoC this should be one of: + - "amlogic,meson6-efuse" + - "amlogic,meson8-efuse" + - "amlogic,meson8b-efuse" +- reg: base address and size of the efuse registers +- clocks: a reference to the efuse core gate clock +- clock-names: must be "core" + +All properties and sub-nodes as well as the consumer bindings +defined in nvmem.txt in this directory are also supported. + + +Example: + efuse: nvmem@0 { + compatible = "amlogic,meson8-efuse"; + reg = <0x0 0x2000>; + clocks = <&clkc CLKID_EFUSE>; + clock-names = "core"; + }; diff --git a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt index 6462e12d8de6..0415265c215a 100644 --- a/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/brcm,ocotp.txt @@ -10,7 +10,7 @@ Required Properties: Example: -otp: otp@0301c800 { +otp: otp@301c800 { compatible = "brcm,ocotp"; reg = <0x0301c800 0x2c>; brcm,ocotp-size = <2048>; diff --git a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt index 70d791b03ea1..f162c72b4e36 100644 --- a/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt +++ b/Documentation/devicetree/bindings/nvmem/imx-ocotp.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ocotp: ocotp@021bc000 { + ocotp: ocotp@21bc000 { compatible = "fsl,imx6q-ocotp", "syscon"; reg = <0x021bc000 0x4000>; clocks = <&clks IMX6QDL_CLK_IIM>; diff --git a/Documentation/devicetree/bindings/nvmem/nvmem.txt b/Documentation/devicetree/bindings/nvmem/nvmem.txt index b52bc11e9597..fd06c09b822b 100644 --- a/Documentation/devicetree/bindings/nvmem/nvmem.txt +++ b/Documentation/devicetree/bindings/nvmem/nvmem.txt @@ -33,7 +33,7 @@ bits: Is pair of bit location and number of bits, which specifies offset For example: /* Provider */ - qfprom: qfprom@00700000 { + qfprom: qfprom@700000 { ... /* Data cells */ diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt index 4ad68b7f5c18..26fe878d5c86 100644 --- a/Documentation/devicetree/bindings/nvmem/qfprom.txt +++ b/Documentation/devicetree/bindings/nvmem/qfprom.txt @@ -12,7 +12,7 @@ bindings/nvmem/nvmem.txt Example: - qfprom: qfprom@00700000 { + qfprom: qfprom@700000 { compatible = "qcom,qfprom"; reg = <0x00700000 0x8000>; ... diff --git a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt index 1ff02afdc55a..60bec4782806 100644 --- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt +++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt @@ -6,6 +6,7 @@ Required properties: - "rockchip,rk3188-efuse" - for RK3188 SoCs. - "rockchip,rk3228-efuse" - for RK3228 SoCs. - "rockchip,rk3288-efuse" - for RK3288 SoCs. + - "rockchip,rk3368-efuse" - for RK3368 SoCs. - "rockchip,rk3399-efuse" - for RK3399 SoCs. - reg: Should contain the registers location and exact eFuse size - clocks: Should be the clock id of eFuse diff --git a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt new file mode 100644 index 000000000000..20bc49b49799 --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt @@ -0,0 +1,20 @@ +Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D +Secure Non-Volatile Storage. + +This DT node should be represented as a sub-node of a "syscon", +"simple-mfd" node. + +Required properties: +- compatible: should be one of the fallowing variants: + "fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S + "fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL + +Example: +snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd"; + reg = <0x020cc000 0x4000>; + + snvs_lpgpr: snvs-lpgpr { + compatible = "fsl,imx6q-snvs-lpgpr"; + }; +}; diff --git a/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt new file mode 100644 index 000000000000..eccf490d5a6d --- /dev/null +++ b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt @@ -0,0 +1,49 @@ += UniPhier eFuse device tree bindings = + +This UniPhier eFuse must be under soc-glue. + +Required properties: +- compatible: should be "socionext,uniphier-efuse" +- reg: should contain the register location and length + += Data cells = +Are child nodes of efuse, bindings of which as described in +bindings/nvmem/nvmem.txt + +Example: + + soc-glue@5f900000 { + compatible = "socionext,uniphier-ld20-soc-glue-debug", + "simple-mfd"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x5f900000 0x2000>; + + efuse@100 { + compatible = "socionext,uniphier-efuse"; + reg = <0x100 0x28>; + }; + + efuse@200 { + compatible = "socionext,uniphier-efuse"; + reg = <0x200 0x68>; + #address-cells = <1>; + #size-cells = <1>; + + /* Data cells */ + usb_mon: usb-mon@54 { + reg = <0x54 0xc>; + }; + }; + }; + += Data consumers = +Are device nodes which consume nvmem data cells. + +Example: + + usb { + ... + nvmem-cells = <&usb_mon>; + nvmem-cell-names = "usb_mon"; + } diff --git a/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt new file mode 100644 index 000000000000..4950c794ecbb --- /dev/null +++ b/Documentation/devicetree/bindings/openrisc/opencores/or1ksim.txt @@ -0,0 +1,39 @@ +OpenRISC Generic SoC +==================== + +Boards and FPGA SoC's which support the OpenRISC standard platform. The +platform essentially follows the conventions of the OpenRISC architecture +specification, however some aspects, such as the boot protocol have been defined +by the Linux port. + +Required properties +------------------- + - compatible: Must include "opencores,or1ksim" + +CPU nodes: +---------- +A "cpus" node is required. Required properties: + - #address-cells: Must be 1. + - #size-cells: Must be 0. +A CPU sub-node is also required for at least CPU 0. Since the topology may +be probed via CPS, it is not necessary to specify secondary CPUs. Required +properties: + - compatible: Must be "opencores,or1200-rtlsvn481". + - reg: CPU number. + - clock-frequency: The CPU clock frequency in Hz. +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + cpu@0 { + compatible = "opencores,or1200-rtlsvn481"; + reg = <0>; + clock-frequency = <20000000>; + }; + }; + + +Boot protocol +------------- +The bootloader may pass the following arguments to the kernel: + - r3: address of a flattened device-tree blob or 0x0. diff --git a/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt new file mode 100644 index 000000000000..515b2f9542e5 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/designware-pcie-ecam.txt @@ -0,0 +1,42 @@ +* Synopsys DesignWare PCIe root complex in ECAM shift mode + +In some cases, firmware may already have configured the Synopsys DesignWare +PCIe controller in RC mode with static ATU window mappings that cover all +config, MMIO and I/O spaces in a [mostly] ECAM compatible fashion. +In this case, there is no need for the OS to perform any low level setup +of clocks, PHYs or device registers, nor is there any reason for the driver +to reconfigure ATU windows for config and/or IO space accesses at runtime. + +In cases where the IP was synthesized with a minimum ATU window size of +64 KB, it cannot be supported by the generic ECAM driver, because it +requires special config space accessors that filter accesses to device #1 +and beyond on the first bus. + +Required properties: +- compatible: "marvell,armada8k-pcie-ecam" or + "socionext,synquacer-pcie-ecam" or + "snps,dw-pcie-ecam" (must be preceded by a more specific match) + +Please refer to the binding document of "pci-host-ecam-generic" in the +file host-generic-pci.txt for a description of the remaining required +and optional properties. + +Example: + + pcie1: pcie@7f000000 { + compatible = "socionext,synquacer-pcie-ecam", "snps,dw-pcie-ecam"; + device_type = "pci"; + reg = <0x0 0x7f000000 0x0 0xf00000>; + bus-range = <0x0 0xe>; + #address-cells = <3>; + #size-cells = <2>; + ranges = <0x1000000 0x00 0x00010000 0x00 0x7ff00000 0x0 0x00010000>, + <0x2000000 0x00 0x70000000 0x00 0x70000000 0x0 0x0f000000>, + <0x3000000 0x3f 0x00000000 0x3f 0x00000000 0x1 0x00000000>; + + #interrupt-cells = <0x1>; + interrupt-map-mask = <0x0 0x0 0x0 0x0>; + interrupt-map = <0x0 0x0 0x0 0x0 &gic 0x0 0x0 0x0 182 0x4>; + msi-map = <0x0 &its 0x0 0x10000>; + dma-coherent; + }; diff --git a/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt new file mode 100644 index 000000000000..c84bc027930b --- /dev/null +++ b/Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt @@ -0,0 +1,68 @@ +HiSilicon STB PCIe host bridge DT description + +The HiSilicon STB PCIe host controller is based on the DesignWare PCIe core. +It shares common functions with the DesignWare PCIe core driver and inherits +common properties defined in +Documentation/devicetree/bindings/pci/designware-pcie.txt. + +Additional properties are described here: + +Required properties +- compatible: Should be one of the following strings: + "hisilicon,hi3798cv200-pcie" +- reg: Should contain sysctl, rc_dbi, config registers location and length. +- reg-names: Must include the following entries: + "control": control registers of PCIe controller; + "rc-dbi": configuration space of PCIe controller; + "config": configuration transaction space of PCIe controller. +- bus-range: PCI bus numbers covered. +- interrupts: MSI interrupt. +- interrupt-names: Must include "msi" entries. +- clocks: List of phandle and clock specifier pairs as listed in clock-names + property. +- clock-name: Must include the following entries: + "aux": auxiliary gate clock; + "pipe": pipe gate clock; + "sys": sys gate clock; + "bus": bus gate clock. +- resets: List of phandle and reset specifier pairs as listed in reset-names + property. +- reset-names: Must include the following entries: + "soft": soft reset; + "sys": sys reset; + "bus": bus reset. + +Optional properties: +- reset-gpios: The gpio to generate PCIe PERST# assert and deassert signal. +- phys: List of phandle and phy mode specifier, should be 0. +- phy-names: Must be "phy". + +Example: + pcie@f9860000 { + compatible = "hisilicon,hi3798cv200-pcie"; + reg = <0xf9860000 0x1000>, + <0xf0000000 0x2000>, + <0xf2000000 0x01000000>; + reg-names = "control", "rc-dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + bus-range = <0 15>; + num-lanes = <1>; + ranges=<0x81000000 0 0 0xf4000000 0 0x00010000 + 0x82000000 0 0xf3000000 0xf3000000 0 0x01000000>; + interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "msi"; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg PCIE_AUX_CLK>, + <&crg PCIE_PIPE_CLK>, + <&crg PCIE_SYS_CLK>, + <&crg PCIE_BUS_CLK>; + clock-names = "aux", "pipe", "sys", "bus"; + resets = <&crg 0x18c 6>, <&crg 0x18c 5>, <&crg 0x18c 4>; + reset-names = "soft", "sys", "bus"; + phys = <&combphy1 PHY_TYPE_PCIE>; + phy-names = "phy"; + }; diff --git a/Documentation/devicetree/bindings/pci/layerscape-pci.txt b/Documentation/devicetree/bindings/pci/layerscape-pci.txt index c0484da0f20d..66df1e81e0b8 100644 --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt @@ -18,6 +18,7 @@ Required properties: "fsl,ls2088a-pcie" "fsl,ls1088a-pcie" "fsl,ls1046a-pcie" + "fsl,ls1012a-pcie" - reg: base addresses and lengths of the PCIe controller register blocks. - interrupts: A list of interrupt outputs of the controller. Must contain an entry for each entry in the interrupt-names property. diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index 982a74ea6df9..145a4f04194f 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -1,10 +1,15 @@ NVIDIA Tegra PCIe controller Required properties: -- compatible: For Tegra20, must contain "nvidia,tegra20-pcie". For Tegra30, - "nvidia,tegra30-pcie". For Tegra124, must contain "nvidia,tegra124-pcie". - Otherwise, must contain "nvidia,<chip>-pcie", plus one of the above, where - <chip> is tegra132 or tegra210. +- compatible: Must be: + - "nvidia,tegra20-pcie": for Tegra20 + - "nvidia,tegra30-pcie": for Tegra30 + - "nvidia,tegra124-pcie": for Tegra124 and Tegra132 + - "nvidia,tegra210-pcie": for Tegra210 + - "nvidia,tegra186-pcie": for Tegra186 +- power-domains: To ungate power partition by BPMP powergate driver. Must + contain BPMP phandle and PCIe power partition ID. This is required only + for Tegra186. - device_type: Must be "pci" - reg: A list of physical base address and length for each set of controller registers. Must contain an entry for each entry in the reg-names property. @@ -124,6 +129,16 @@ Power supplies for Tegra210: - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must supply 1.8 V. +Power supplies for Tegra186: +- Required: + - dvdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - hvdd-pex-pll-supply: High-voltage supply for PLLE (shared with USB3). Must + supply 1.8 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 1.8 V. + - vddio-pexctl-aud-supply: Power supply for PCIe side band signals. Must + supply 1.8 V. + Root ports are defined as subnodes of the PCIe controller node. Required properties: @@ -255,7 +270,7 @@ Tegra30: SoC DTSI: - pcie-controller@00003000 { + pcie-controller@3000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; reg = <0x00003000 0x00000800 /* PADS registers */ @@ -334,7 +349,7 @@ SoC DTSI: Board DTS: - pcie-controller@00003000 { + pcie-controller@3000 { status = "okay"; avdd-pexa-supply = <&ldo1_reg>; @@ -360,7 +375,7 @@ Tegra124: SoC DTSI: - pcie-controller@01003000 { + pcie-controller@1003000 { compatible = "nvidia,tegra124-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -425,7 +440,7 @@ SoC DTSI: Board DTS: - pcie-controller@01003000 { + pcie-controller@1003000 { status = "okay"; avddio-pex-supply = <&vdd_1v05_run>; @@ -456,7 +471,7 @@ Tegra210: SoC DTSI: - pcie-controller@01003000 { + pcie-controller@1003000 { compatible = "nvidia,tegra210-pcie"; device_type = "pci"; reg = <0x0 0x01003000 0x0 0x00000800 /* PADS registers */ @@ -521,7 +536,7 @@ SoC DTSI: Board DTS: - pcie-controller@01003000 { + pcie-controller@1003000 { status = "okay"; avdd-pll-uerefe-supply = <&avdd_1v05_pll>; @@ -546,3 +561,114 @@ Board DTS: status = "okay"; }; }; + +Tegra186: +--------- + +SoC DTSI: + + pcie@10003000 { + compatible = "nvidia,tegra186-pcie"; + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_PCX>; + device_type = "pci"; + reg = <0x0 0x10003000 0x0 0x00000800 /* PADS registers */ + 0x0 0x10003800 0x0 0x00000800 /* AFI registers */ + 0x0 0x40000000 0x0 0x10000000>; /* configuration space */ + reg-names = "pads", "afi", "cs"; + + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* controller interrupt */ + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; /* MSI interrupt */ + interrupt-names = "intr", "msi"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + + bus-range = <0x00 0xff>; + #address-cells = <3>; + #size-cells = <2>; + + ranges = <0x82000000 0 0x10000000 0x0 0x10000000 0 0x00001000 /* port 0 configuration space */ + 0x82000000 0 0x10001000 0x0 0x10001000 0 0x00001000 /* port 1 configuration space */ + 0x82000000 0 0x10004000 0x0 0x10004000 0 0x00001000 /* port 2 configuration space */ + 0x81000000 0 0x0 0x0 0x50000000 0 0x00010000 /* downstream I/O (64 KiB) */ + 0x82000000 0 0x50100000 0x0 0x50100000 0 0x07F00000 /* non-prefetchable memory (127 MiB) */ + 0xc2000000 0 0x58000000 0x0 0x58000000 0 0x28000000>; /* prefetchable memory (640 MiB) */ + + clocks = <&bpmp TEGRA186_CLK_AFI>, + <&bpmp TEGRA186_CLK_PCIE>, + <&bpmp TEGRA186_CLK_PLLE>; + clock-names = "afi", "pex", "pll_e"; + + resets = <&bpmp TEGRA186_RESET_AFI>, + <&bpmp TEGRA186_RESET_PCIE>, + <&bpmp TEGRA186_RESET_PCIEXCLK>; + reset-names = "afi", "pex", "pcie_x"; + + status = "disabled"; + + pci@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x10000000 0 0x1000>; + reg = <0x000800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <2>; + }; + + pci@2,0 { + device_type = "pci"; + assigned-addresses = <0x82001000 0 0x10001000 0 0x1000>; + reg = <0x001000 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + device_type = "pci"; + assigned-addresses = <0x82001800 0 0x10004000 0 0x1000>; + reg = <0x001800 0 0 0 0>; + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + ranges; + + nvidia,num-lanes = <1>; + }; + }; + +Board DTS: + + pcie@10003000 { + status = "okay"; + + dvdd-pex-supply = <&vdd_pex>; + hvdd-pex-pll-supply = <&vdd_1v8>; + hvdd-pex-supply = <&vdd_1v8>; + vddio-pexctl-aud-supply = <&vdd_1v8>; + + pci@1,0 { + nvidia,num-lanes = <4>; + status = "okay"; + }; + + pci@2,0 { + nvidia,num-lanes = <0>; + status = "disabled"; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + status = "disabled"; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt index 3d038638612b..9fe7e12a7bf3 100644 --- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt +++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt @@ -60,17 +60,15 @@ Example SoC configuration: 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; - pci@0,1 { + usb@1,0 { reg = <0x800 0 0 0 0>; - device_type = "pci"; - phys = <&usbphy 0 0>; + phys = <&usb0 0>; phy-names = "usb"; }; - pci@0,2 { + usb@2,0 { reg = <0x1000 0 0 0 0>; - device_type = "pci"; - phys = <&usbphy 0 0>; + phys = <&usb0 0>; phy-names = "usb"; }; }; diff --git a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt index 30b364e504ba..11063293f761 100644 --- a/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt +++ b/Documentation/devicetree/bindings/pci/v3-v360epc-pci.txt @@ -2,14 +2,75 @@ V3 Semiconductor V360 EPC PCI bridge This bridge is found in the ARM Integrator/AP (Application Platform) -Integrator-specific notes: +Required properties: +- compatible: should be one of: + "v3,v360epc-pci" + "arm,integrator-ap-pci", "v3,v360epc-pci" +- reg: should contain two register areas: + first the base address of the V3 host bridge controller, 64KB + second the configuration area register space, 16MB +- interrupts: should contain a reference to the V3 error interrupt + as routed on the system. +- bus-range: see pci.txt +- ranges: this follows the standard PCI bindings in the IEEE Std + 1275-1994 (see pci.txt) with the following restriction: + - The non-prefetchable and prefetchable memory windows must + each be exactly 256MB (0x10000000) in size. + - The prefetchable memory window must be immediately adjacent + to the non-prefetcable memory window +- dma-ranges: three ranges for the inbound memory region. The ranges must + be aligned to a 1MB boundary, and may be 1MB, 2MB, 4MB, 8MB, 16MB, 32MB, + 64MB, 128MB, 256MB, 512MB, 1GB or 2GB in size. The memory should be marked + as pre-fetchable. Two ranges are supported by the hardware. -- syscon: should contain a link to the syscon device node (since +Integrator-specific required properties: +- syscon: should contain a link to the syscon device node, since on the Integrator, some registers in the syscon are required to - operate the V3). + operate the V3 host bridge. -V360 EPC specific notes: +Example: -- reg: should contain the base address of the V3 adapter. -- interrupts: should contain a reference to the V3 error interrupt - as routed on the system. +pci: pciv3@62000000 { + compatible = "arm,integrator-ap-pci", "v3,v360epc-pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0x62000000 0x10000>, <0x61000000 0x01000000>; + interrupt-parent = <&pic>; + interrupts = <17>; /* Bus error IRQ */ + clocks = <&pciclk>; + bus-range = <0x00 0xff>; + ranges = 0x01000000 0 0x00000000 /* I/O space @00000000 */ + 0x60000000 0 0x01000000 /* 16 MiB @ LB 60000000 */ + 0x02000000 0 0x40000000 /* non-prefectable memory @40000000 */ + 0x40000000 0 0x10000000 /* 256 MiB @ LB 40000000 1:1 */ + 0x42000000 0 0x50000000 /* prefetchable memory @50000000 */ + 0x50000000 0 0x10000000>; /* 256 MiB @ LB 50000000 1:1 */ + dma-ranges = <0x02000000 0 0x20000000 /* EBI memory space */ + 0x20000000 0 0x20000000 /* 512 MB @ LB 20000000 1:1 */ + 0x02000000 0 0x80000000 /* Core module alias memory */ + 0x80000000 0 0x40000000>; /* 1GB @ LB 80000000 */ + interrupt-map-mask = <0xf800 0 0 0x7>; + interrupt-map = < + /* IDSEL 9 */ + 0x4800 0 0 1 &pic 13 /* INT A on slot 9 is irq 13 */ + 0x4800 0 0 2 &pic 14 /* INT B on slot 9 is irq 14 */ + 0x4800 0 0 3 &pic 15 /* INT C on slot 9 is irq 15 */ + 0x4800 0 0 4 &pic 16 /* INT D on slot 9 is irq 16 */ + /* IDSEL 10 */ + 0x5000 0 0 1 &pic 14 /* INT A on slot 10 is irq 14 */ + 0x5000 0 0 2 &pic 15 /* INT B on slot 10 is irq 15 */ + 0x5000 0 0 3 &pic 16 /* INT C on slot 10 is irq 16 */ + 0x5000 0 0 4 &pic 13 /* INT D on slot 10 is irq 13 */ + /* IDSEL 11 */ + 0x5800 0 0 1 &pic 15 /* INT A on slot 11 is irq 15 */ + 0x5800 0 0 2 &pic 16 /* INT B on slot 11 is irq 16 */ + 0x5800 0 0 3 &pic 13 /* INT C on slot 11 is irq 13 */ + 0x5800 0 0 4 &pic 14 /* INT D on slot 11 is irq 14 */ + /* IDSEL 12 */ + 0x6000 0 0 1 &pic 16 /* INT A on slot 12 is irq 16 */ + 0x6000 0 0 2 &pic 13 /* INT B on slot 12 is irq 13 */ + 0x6000 0 0 3 &pic 14 /* INT C on slot 12 is irq 14 */ + 0x6000 0 0 4 &pic 15 /* INT D on slot 12 is irq 15 */ + >; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt new file mode 100644 index 000000000000..24a0d06acd1d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/brcm,brcmstb-usb-phy.txt @@ -0,0 +1,43 @@ +Broadcom STB USB PHY + +Required properties: + - compatible: brcm,brcmstb-usb-phy + - reg: two offset and length pairs. + The first pair specifies a manditory set of memory mapped + registers used for general control of the PHY. + The second pair specifies optional registers used by some of + the SoCs that support USB 3.x + - #phy-cells: Shall be 1 as it expects one argument for setting + the type of the PHY. Possible values are: + - PHY_TYPE_USB2 for USB1.1/2.0 PHY + - PHY_TYPE_USB3 for USB3.x PHY + +Optional Properties: +- clocks : clock phandles. +- clock-names: String, clock name. +- brcm,ipp: Boolean, Invert Port Power. + Possible values are: 0 (Don't invert), 1 (Invert) +- brcm,ioc: Boolean, Invert Over Current detection. + Possible values are: 0 (Don't invert), 1 (Invert) +NOTE: one or both of the following two properties must be set +- brcm,has-xhci: Boolean indicating the phy has an XHCI phy. +- brcm,has-eohci: Boolean indicating the phy has an EHCI/OHCI phy. +- dr_mode: String, PHY Device mode. + Possible values are: "host", "peripheral ", "drd" or "typec-pd" + If this property is not defined, the phy will default to "host" mode. + +Example: + +usbphy_0: usb-phy@f0470200 { + reg = <0xf0470200 0xb8>, + <0xf0471940 0x6c0>; + compatible = "brcm,brcmstb-usb-phy"; + #phy-cells = <1>; + dr_mode = "host" + brcm,ioc = <1>; + brcm,ipp = <1>; + brcm,has-xhci; + brcm,has-eohci; + clocks = <&usb20>, <&usb30>; + clock-names = "sw_usb", "sw_usb3"; +}; diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt index 761c4bc24a9b..10efff28b52b 100644 --- a/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-pcie-phy.txt @@ -15,7 +15,7 @@ Required properties For the child node: - #phy-cells: must be 0 Example: - pcie_phy: phy@0301d0a0 { + pcie_phy: phy@301d0a0 { compatible = "brcm,cygnus-pcie-phy"; reg = <0x0301d0a0 0x14>; diff --git a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt index 97977cd29a98..0aced97d8092 100644 --- a/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt +++ b/Documentation/devicetree/bindings/phy/brcm-sata-phy.txt @@ -27,7 +27,16 @@ Sub-nodes optional properties: This property is not applicable for "brcm,iproc-ns2-sata-phy", "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy". -Example: +- brcm,rxaeq-mode: string that indicates the desired RX equalizer + mode, possible values are: + "off" (equivalent to not specifying the property) + "auto" + "manual" (brcm,rxaeq-value is used in that case) + +- brcm,rxaeq-value: when 'rxaeq-mode' is set to "manual", provides the RX + equalizer value that should be used. Allowed range is 0..63. + +Example sata-phy@f0458100 { compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3"; reg = <0xf0458100 0x1e00>, <0xf045804c 0x10>; diff --git a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt index 1d25b04cd05e..6ac98b3b5f57 100644 --- a/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/mxs-usb-phy.txt @@ -23,7 +23,7 @@ Optional properties: the 17.78mA TX reference current. Default: 100 Example: -usbphy1: usbphy@020c9000 { +usbphy1: usbphy@20c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; diff --git a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt index 91da947ae9b6..eeb9e1874ea6 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen2-phy.txt @@ -4,10 +4,13 @@ This file provides information on what the device node for the R-Car generation 2 USB PHY contains. Required properties: -- compatible: "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. +- compatible: "renesas,usb-phy-r8a7743" if the device is a part of R8A7743 SoC. + "renesas,usb-phy-r8a7745" if the device is a part of R8A7745 SoC. + "renesas,usb-phy-r8a7790" if the device is a part of R8A7790 SoC. "renesas,usb-phy-r8a7791" if the device is a part of R8A7791 SoC. "renesas,usb-phy-r8a7794" if the device is a part of R8A7794 SoC. - "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 compatible device. + "renesas,rcar-gen2-usb-phy" for a generic R-Car Gen2 or + RZ/G1 compatible device. When compatible with the generic version, nodes must list the SoC-specific version corresponding to the platform first diff --git a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt index ace9cce2704a..99b651b33110 100644 --- a/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt +++ b/Documentation/devicetree/bindings/phy/rcar-gen3-phy-usb2.txt @@ -8,6 +8,8 @@ Required properties: SoC. "renesas,usb2-phy-r8a7796" if the device is a part of an R8A7796 SoC. + "renesas,usb2-phy-r8a77995" if the device is a part of an + R8A77995 SoC. "renesas,rcar-gen3-usb2-phy" for a generic R-Car Gen3 compatible device. When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt index f9853156e311..64f7109aea1f 100644 --- a/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/sun9i-usb-phy.txt @@ -25,7 +25,7 @@ It is recommended to list all clocks and resets available. The driver will only use those matching the phy_type. Example: - usbphy1: phy@00a01800 { + usbphy1: phy@a01800 { compatible = "allwinner,sun9i-a80-usb-phy"; reg = <0x00a01800 0x4>; clocks = <&usb_phy_clk 2>, <&usb_phy_clk 10>, diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 6f2ec9af0de2..09789fdfa749 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -89,7 +89,7 @@ Optional subnode-properties: Examples: -pio: pinctrl@01c20800 { +pio: pinctrl@1c20800 { compatible = "allwinner,sun5i-a13-pinctrl"; reg = <0x01c20800 0x400>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt index 61466c58faae..d857b67fab72 100644 --- a/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/cortina,gemini-pinctrl.txt @@ -9,8 +9,14 @@ The pin controller node must be a subnode of the system controller node. Required properties: - compatible: "cortina,gemini-pinctrl" -Subnodes of the pin controller contain pin control multiplexing set-up. -Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes. +Subnodes of the pin controller contain pin control multiplexing set-up +and pin configuration of individual pins. + +Please refer to pinctrl-bindings.txt for generic pin multiplexing nodes +and generic pin config nodes. + +Supported configurations: +- skew-delay is supported on the Ethernet pins Example: diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt index 42d74f8a1bcc..a1050b5982ec 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt @@ -58,14 +58,14 @@ Some requirements for using fsl,imx-pinctrl binding: configurations by referring to the phandle of that pin configuration node. Examples: -usdhc@0219c000 { /* uSDHC4 */ +usdhc@219c000 { /* uSDHC4 */ non-removable; vmmc-supply = <®_3p3v>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4_1>; }; -iomuxc@020e0000 { +iomuxc@20e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt index 51b943cc9770..cf9ccdff4455 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pdc-pinctrl.txt @@ -89,7 +89,7 @@ Valid values for pin and group names are: Example: - pinctrl_pdc: pinctrl@02006500 { + pinctrl_pdc: pinctrl@2006500 { #gpio-range-cells = <3>; compatible = "img,tz1090-pdc-pinctrl"; reg = <0x02006500 0x100>; @@ -121,7 +121,7 @@ Example board file extracts: }; }; - ir: ir@02006200 { + ir: ir@2006200 { pinctrl-names = "default"; pinctrl-0 = <&irmod_default>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt index 509faa87ad0e..2dfd9a3fc1e4 100644 --- a/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/img,tz1090-pinctrl.txt @@ -197,7 +197,7 @@ Valid values for pin and group names are: Example: - pinctrl: pinctrl@02005800 { + pinctrl: pinctrl@2005800 { #gpio-range-cells = <3>; compatible = "img,tz1090-pinctrl"; reg = <0x02005800 0xe4>; @@ -221,7 +221,7 @@ Example board file extract: }; }; - uart@02004b00 { + uart@2004b00 { pinctrl-names = "default"; pinctrl-0 = <&uart0_default>; }; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt index f64060908d5a..c7c088d2dd50 100644 --- a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -97,8 +97,8 @@ group spi_quad - pins 15-16 - functions spi, gpio -group uart_2 - - pins 9-10 +group uart2 + - pins 9-10 and 18-19 - functions uart, gpio Available groups and functions for the South bridge: diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt index 4048f43a9d29..02e971c39d81 100644 --- a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -97,7 +97,7 @@ SoC file extract: Board file extract: ------------------- - pcie-controller@01003000 { + pcie-controller@1003000 { ... phys = <&padctl 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 4483cc31e531..ad9bbbba36e9 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -271,6 +271,10 @@ output-high - set the pin to output mode with high level sleep-hardware-state - indicate this is sleep related state which will be programmed into the registers for the sleep state. slew-rate - set the slew rate +skew-delay - this affects the expected clock skew on input pins + and the delay before latching a value to an output + pin. Typically indicates how many double-inverters are + used to delay the signal. For example: diff --git a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt index c934106b10aa..9c451c20dda4 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mcp23s08.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt @@ -13,6 +13,7 @@ Required properties: - "microchip,mcp23s18" for 16 GPIO SPI version - "microchip,mcp23008" for 8 GPIO I2C version or - "microchip,mcp23017" for 16 GPIO I2C version of the chip + - "microchip,mcp23018" for 16 GPIO I2C version NOTE: Do not use the old mcp prefix any more. It is deprecated and will be removed. - #gpio-cells : Should be two. @@ -81,3 +82,61 @@ gpiom1: gpio@0 { reg = <0>; spi-max-frequency = <1000000>; }; + +Pull-up configuration +===================== + +If pins are used as output, they can also be configured with pull-ups. This is +done with pinctrl. + +Please refer file <devicetree/bindings/pinctrl/pinctrl-bindings.txt> +for details of the common pinctrl bindings used by client devices, +including the meaning of the phrase "pin configuration node". + +Optional Pinmux properties: +-------------------------- +Following properties are required if default setting of pins are required +at boot. +- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl[0...n]: Properties to contain the phandle for pinctrl states per + <pinctrl-binding.txt>. + +The pin configurations are defined as child of the pinctrl states node. Each +sub-node have following properties: + +Required properties: +------------------ +- pins: List of pins. Valid values of pins properties are: + gpio0 ... gpio7 for the devices with 8 GPIO pins and + gpio0 ... gpio15 for the devices with 16 GPIO pins. + +Optional properties: +------------------- +The following optional property is defined in the pinmux DT binding document +<pinctrl-bindings.txt>. Absence of this property will leave the configuration +in its default state. + bias-pull-up + +Example with pinctrl to pull-up output pins: +gpio21: gpio@21 { + compatible = "microchip,mcp23017"; + gpio-controller; + #gpio-cells = <0x2>; + reg = <0x21>; + interrupt-parent = <&socgpio>; + interrupts = <0x17 0x8>; + interrupt-names = "mcp23017@21 irq"; + interrupt-controller; + #interrupt-cells = <0x2>; + microchip,irq-mirror; + pinctrl-names = "default"; + pinctrl-0 = <&i2cgpio0irq &gpio21pullups>; + + gpio21pullups: pinmux { + pins = "gpio0", "gpio1", "gpio2", "gpio3", + "gpio4", "gpio5", "gpio6", "gpio7", + "gpio8", "gpio9", "gpio10", "gpio11", + "gpio12", "gpio13", "gpio14", "gpio15"; + bias-pull-up; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt index 37d744750579..231fa1db7c5e 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt65xx.txt @@ -86,7 +86,7 @@ Examples: reg = <0 0x1020C020 0 0x1000>; }; - pinctrl@01c20800 { + pinctrl@1c20800 { compatible = "mediatek,mt8135-pinctrl"; reg = <0 0x1000B000 0 0x1000>; mediatek,pctl-regmap = <&syscfg_pctl_a &syscfg_pctl_b>; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt index 013c675b5b64..48b9be48af18 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-st.txt @@ -89,7 +89,7 @@ Example: interrupt-names = "irqmux"; ranges = <0 0x09610000 0x6000>; - pio0: gpio@09610000 { + pio0: gpio@9610000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt index e312a71b2f94..aaf01e929eea 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8996-pinctrl.txt @@ -175,7 +175,7 @@ to specify in a pin configuration subnode: Example: - tlmm: pinctrl@01010000 { + tlmm: pinctrl@1010000 { compatible = "qcom,msm8996-pinctrl"; reg = <0x01010000 0x300000>; interrupts = <0 208 0>; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 5b12c57e7f02..5c25fcb29fb5 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -15,6 +15,7 @@ PMIC's from Qualcomm. "qcom,pm8921-gpio" "qcom,pm8941-gpio" "qcom,pm8994-gpio" + "qcom,pmi8994-gpio" "qcom,pma8084-gpio" "qcom,pmi8994-gpio" @@ -85,6 +86,7 @@ to specify in a pin configuration subnode: gpio1-gpio44 for pm8921 gpio1-gpio36 for pm8941 gpio1-gpio22 for pm8994 + gpio1-gpio10 for pmi8994 gpio1-gpio22 for pma8084 gpio1-gpio10 for pmi8994 diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt index 43e21474528a..fd3696eb36bf 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rza1-pinctrl.txt @@ -12,8 +12,10 @@ Pin controller node ------------------- Required properties: - - compatible - this shall be "renesas,r7s72100-ports". + - compatible: should be: + - "renesas,r7s72100-ports": for RZ/A1H + - "renesas,r7s72101-ports", "renesas,r7s72100-ports": for RZ/A1M + - "renesas,r7s72102-ports": for RZ/A1L - reg address base and length of the memory area where the pin controller diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt index 33e3d3c47552..58c2a4c229db 100644 --- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt @@ -143,6 +143,24 @@ Required properties: * 16 : Alternate Function 15 * 17 : Analog + To simplify the usage, macro is available to generate "pinmux" field. + This macro is available here: + - include/dt-bindings/pinctrl/stm32-pinfunc.h + + Some examples of using macro: + /* GPIO A9 set as alernate function 2 */ + ... { + pinmux = <STM32_PINMUX('A', 9, AF2)>; + }; + /* GPIO A9 set as GPIO */ + ... { + pinmux = <STM32_PINMUX('A', 9, GPIO)>; + }; + /* GPIO A9 set as analog */ + ... { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>; + }; + Optional properties: - GENERIC_PINCONFIG: is the generic pinconfig options to use. Available options are: @@ -165,13 +183,13 @@ pin-controller { ... usart1_pins_a: usart1@0 { pins1 { - pinmux = <STM32F429_PA9_FUNC_USART1_TX>; + pinmux = <STM32_PINMUX('A', 9, AF7)>; bias-disable; drive-push-pull; slew-rate = <0>; }; pins2 { - pinmux = <STM32F429_PA10_FUNC_USART1_RX>; + pinmux = <STM32_PINMUX('A', 10, AF7)>; bias-disable; }; }; diff --git a/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt new file mode 100644 index 000000000000..1cd050b4054c --- /dev/null +++ b/Documentation/devicetree/bindings/power/amlogic,meson-gx-pwrc.txt @@ -0,0 +1,61 @@ +Amlogic Meson Power Controller +============================== + +The Amlogic Meson SoCs embeds an internal Power domain controller. + +VPU Power Domain +---------------- + +The Video Processing Unit power domain is controlled by this power controller, +but the domain requires some external resources to meet the correct power +sequences. +The bindings must respect the power domain bindings as described in the file +power_domain.txt + +Device Tree Bindings: +--------------------- + +Required properties: +- compatible: should be "amlogic,meson-gx-pwrc-vpu" for the Meson GX SoCs +- #power-domain-cells: should be 0 +- amlogic,hhi-sysctrl: phandle to the HHI sysctrl node +- resets: phandles to the reset lines needed for this power demain sequence + as described in ../reset/reset.txt +- clocks: from common clock binding: handle to VPU and VAPB clocks +- clock-names: from common clock binding: must contain "vpu", "vapb" + corresponding to entry in the clocks property. + +Parent node should have the following properties : +- compatible: "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd" +- reg: base address and size of the AO system control register space. + +Example: +------- + +ao_sysctrl: sys-ctrl@0 { + compatible = "amlogic,meson-gx-ao-sysctrl", "syscon", "simple-mfd"; + reg = <0x0 0x0 0x0 0x100>; + + pwrc_vpu: power-controller-vpu { + compatible = "amlogic,meson-gx-pwrc-vpu"; + #power-domain-cells = <0>; + amlogic,hhi-sysctrl = <&sysctrl>; + resets = <&reset RESET_VIU>, + <&reset RESET_VENC>, + <&reset RESET_VCBUS>, + <&reset RESET_BT656>, + <&reset RESET_DVIN_RESET>, + <&reset RESET_RDMA>, + <&reset RESET_VENCI>, + <&reset RESET_VENCP>, + <&reset RESET_VDAC>, + <&reset RESET_VDI6>, + <&reset RESET_VENCL>, + <&reset RESET_VID_LOCK>; + clocks = <&clkc CLKID_VPU>, + <&clkc CLKID_VAPB>; + clock-names = "vpu", "vapb"; + }; +}; + + diff --git a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt index 6c1498958d48..e371b262d709 100644 --- a/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt +++ b/Documentation/devicetree/bindings/power/fsl,imx-gpc.txt @@ -40,7 +40,7 @@ Optional properties: Example: - gpc: gpc@020dc000 { + gpc: gpc@20dc000 { compatible = "fsl,imx6q-gpc"; reg = <0x020dc000 0x4000>; interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>, @@ -80,7 +80,7 @@ that is a phandle pointing to the power domain the device belongs to. Example of a device that is part of the PU power domain: - vpu: vpu@02040000 { + vpu: vpu@2040000 { reg = <0x02040000 0x3c000>; /* ... */ power-domains = <&pd_pu>; diff --git a/Documentation/devicetree/bindings/power/renesas,apmu.txt b/Documentation/devicetree/bindings/power/renesas,apmu.txt index af21502e939c..f747f95eee58 100644 --- a/Documentation/devicetree/bindings/power/renesas,apmu.txt +++ b/Documentation/devicetree/bindings/power/renesas,apmu.txt @@ -8,6 +8,7 @@ Required properties: - compatible: Should be "renesas,<soctype>-apmu", "renesas,apmu" as fallback. Examples with soctypes are: - "renesas,r8a7743-apmu" (RZ/G1M) + - "renesas,r8a7745-apmu" (RZ/G1E) - "renesas,r8a7790-apmu" (R-Car H2) - "renesas,r8a7791-apmu" (R-Car M2-W) - "renesas,r8a7792-apmu" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt index 98cc8c09d02d..8690f10426a3 100644 --- a/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt +++ b/Documentation/devicetree/bindings/power/renesas,rcar-sysc.txt @@ -17,6 +17,7 @@ Required properties: - "renesas,r8a7794-sysc" (R-Car E2) - "renesas,r8a7795-sysc" (R-Car H3) - "renesas,r8a7796-sysc" (R-Car M3-W) + - "renesas,r8a77970-sysc" (R-Car V3M) - "renesas,r8a77995-sysc" (R-Car D3) - reg: Address start and address range for the device. - #power-domain-cells: Must be 1. diff --git a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt index dc7c9bad63ea..1b81fcd9fb72 100644 --- a/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/imx-snvs-poweroff.txt @@ -10,7 +10,7 @@ Required Properties: -reg: Specifies the physical address of the SNVS_LPCR register Example: - snvs@020cc000 { + snvs@20cc000 { compatible = "fsl,sec-v4.0-mon", "simple-bus"; #address-cells = <1>; #size-cells = <1>; diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt index c82f12e2d85c..c5c03789ed1e 100644 --- a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt +++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt @@ -37,12 +37,12 @@ Example 1: Setup keystone reset so that in case software reset or WDT0 is triggered it issues hard reset for SoC. -pllctrl: pll-controller@02310000 { +pllctrl: pll-controller@2310000 { compatible = "ti,keystone-pllctrl", "syscon"; reg = <0x02310000 0x200>; }; -devctrl: device-state-control@02620000 { +devctrl: device-state-control@2620000 { compatible = "ti,keystone-devctrl", "syscon"; reg = <0x02620000 0x1000>; }; diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt new file mode 100644 index 000000000000..4b2195571a49 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt @@ -0,0 +1,66 @@ +Binding for sbs-manager + +Required properties: +- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. +- reg: integer, i2c address of the device. Should be <0xa>. +Optional properties: +- gpio-controller: Marks the port as GPIO controller. + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. +- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell + is used to specify optional parameters: + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. + +From OS view the device is basically an i2c-mux used to communicate with up to +four smart battery devices at address 0xb. The driver actually implements this +behaviour. So standard i2c-mux nodes can be used to register up to four slave +batteries. Channels will be numerated starting from 1 to 4. + +Example: + +batman@a { + compatible = "lltc,ltc1760", "sbs,sbs-manager"; + reg = <0x0a>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 1 1>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 2 1>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 3 1>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/power/ti-smartreflex.txt b/Documentation/devicetree/bindings/power/ti-smartreflex.txt new file mode 100644 index 000000000000..9780957c9115 --- /dev/null +++ b/Documentation/devicetree/bindings/power/ti-smartreflex.txt @@ -0,0 +1,47 @@ +Texas Instruments SmartReflex binding + +SmartReflex is used to set and adjust the SoC operating points. + + +Required properties: + +compatible: Shall be one of the following: + "ti,omap3-smartreflex-core" + "ti,omap3-smartreflex-iva" + "ti,omap4-smartreflex-core" + "ti,omap4-smartreflex-mpu" + "ti,omap4-smartreflex-iva" + +reg: Shall contain the device instance IO range + +interrupts: Shall contain the device instance interrupt + + +Optional properties: + +ti,hwmods: Shall contain the TI interconnect module name if needed + by the SoC + + +Example: + + smartreflex_iva: smartreflex@4a0db000 { + compatible = "ti,omap4-smartreflex-iva"; + reg = <0x4a0db000 0x80>; + interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_iva"; + }; + + smartreflex_core: smartreflex@4a0dd000 { + compatible = "ti,omap4-smartreflex-core"; + reg = <0x4a0dd000 0x80>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_core"; + }; + + smartreflex_mpu: smartreflex@4a0d9000 { + compatible = "ti,omap4-smartreflex-mpu"; + reg = <0x4a0d9000 0x80>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "smartreflex_mpu"; + }; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt index 0f766333b6eb..37f91fa57654 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/mcu-mpc8349emitx.txt @@ -8,7 +8,7 @@ Required properties: Example: -mcu@0a { +mcu@a { #gpio-cells = <2>; compatible = "fsl,mc9s08qg8-mpc8349emitx", "fsl,mcu-mpc8349emitx"; diff --git a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt index c5171660eaf9..51ff54c8b8ef 100644 --- a/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt +++ b/Documentation/devicetree/bindings/pwm/pwm-sun4i.txt @@ -14,7 +14,7 @@ Required properties: Example: - pwm: pwm@01c20e00 { + pwm: pwm@1c20e00 { compatible = "allwinner,sun7i-a20-pwm"; reg = <0x01c20e00 0xc>; clocks = <&osc24M>; diff --git a/Documentation/devicetree/bindings/regulator/da9211.txt b/Documentation/devicetree/bindings/regulator/da9211.txt index 0f2a6f8fcafd..27717e816e71 100644 --- a/Documentation/devicetree/bindings/regulator/da9211.txt +++ b/Documentation/devicetree/bindings/regulator/da9211.txt @@ -1,8 +1,9 @@ -* Dialog Semiconductor DA9211/DA9212/DA9213/DA9214/DA9215 Voltage Regulator +* Dialog Semiconductor DA9211/DA9212/DA9213/DA9223/DA9214/DA9224/DA9215/DA9225 + Voltage Regulator Required properties: -- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" - or "dlg,da9214" or "dlg,da9215" +- compatible: "dlg,da9211" or "dlg,da9212" or "dlg,da9213" or "dlg,da9223" + or "dlg,da9214" or "dlg,da9224" or "dlg,da9215" or "dlg,da9225" - reg: I2C slave address, usually 0x68. - interrupts: the interrupt outputs of the controller - regulators: A node that houses a sub-node for each regulator within the @@ -16,7 +17,6 @@ Optional properties: - Any optional property defined in regulator.txt Example 1) DA9211 - pmic: da9211@68 { compatible = "dlg,da9211"; reg = <0x68>; @@ -35,7 +35,6 @@ Example 1) DA9211 }; Example 2) DA9212 - pmic: da9212@68 { compatible = "dlg,da9212"; reg = <0x68>; @@ -79,7 +78,25 @@ Example 3) DA9213 }; }; -Example 4) DA9214 +Example 4) DA9223 + pmic: da9223@68 { + compatible = "dlg,da9223"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + }; + }; + +Example 5) DA9214 pmic: da9214@68 { compatible = "dlg,da9214"; reg = <0x68>; @@ -105,7 +122,33 @@ Example 4) DA9214 }; }; -Example 5) DA9215 +Example 6) DA9224 + pmic: da9224@68 { + compatible = "dlg,da9224"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <3000000>; + regulator-max-microamp = <6000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; + +Example 7) DA9215 pmic: da9215@68 { compatible = "dlg,da9215"; reg = <0x68>; @@ -131,3 +174,28 @@ Example 5) DA9215 }; }; +Example 8) DA9225 + pmic: da9225@68 { + compatible = "dlg,da9225"; + reg = <0x68>; + interrupts = <3 27>; + + regulators { + BUCKA { + regulator-name = "VBUCKA"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 27 0>; + }; + BUCKB { + regulator-name = "VBUCKB"; + regulator-min-microvolt = < 300000>; + regulator-max-microvolt = <1570000>; + regulator-min-microamp = <4000000>; + regulator-max-microamp = <7000000>; + enable-gpios = <&gpio 17 0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max77686.txt b/Documentation/devicetree/bindings/regulator/max77686.txt index 0dded64d89d3..e9f7578ca09a 100644 --- a/Documentation/devicetree/bindings/regulator/max77686.txt +++ b/Documentation/devicetree/bindings/regulator/max77686.txt @@ -40,7 +40,7 @@ to get matched with their hardware counterparts as follow: Example: - max77686: pmic@09 { + max77686: pmic@9 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 IRQ_TYPE_NONE>; diff --git a/Documentation/devicetree/bindings/regulator/max77802.txt b/Documentation/devicetree/bindings/regulator/max77802.txt index 879e98d3b9aa..b82943d83677 100644 --- a/Documentation/devicetree/bindings/regulator/max77802.txt +++ b/Documentation/devicetree/bindings/regulator/max77802.txt @@ -71,7 +71,7 @@ has not been disabled for that state using "regulator-off-in-suspend". Example: - max77802@09 { + max77802@9 { compatible = "maxim,max77802"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index 444c47831a40..c6dd3f5e485b 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -21,7 +21,7 @@ Each regulator is defined using the standard binding for regulators. Example 1: PFUZE100 - pmic: pfuze100@08 { + pmic: pfuze100@8 { compatible = "fsl,pfuze100"; reg = <0x08>; @@ -122,7 +122,7 @@ Example 1: PFUZE100 Example 2: PFUZE200 - pmic: pfuze200@08 { + pmic: pfuze200@8 { compatible = "fsl,pfuze200"; reg = <0x08>; @@ -216,7 +216,7 @@ Example 2: PFUZE200 Example 3: PFUZE3000 - pmic: pfuze3000@08 { + pmic: pfuze3000@8 { compatible = "fsl,pfuze3000"; reg = <0x08>; diff --git a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt index 0fa3b0fac129..57d2c65899df 100644 --- a/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/qcom,spmi-regulator.txt @@ -8,6 +8,7 @@ Qualcomm SPMI Regulators "qcom,pm8916-regulators" "qcom,pm8941-regulators" "qcom,pm8994-regulators" + "qcom,pmi8994-regulators" - interrupts: Usage: optional @@ -100,6 +101,15 @@ Qualcomm SPMI Regulators Definition: Reference to regulator supplying the input pin, as described in the data sheet. +- vdd_s1-supply: +- vdd_s2-supply: +- vdd_s3-supply: +- vdd_l1-supply: + Usage: optional (pmi8994 only) + Value type: <phandle> + Definition: Reference to regulator supplying the input pin, as + described in the data sheet. + The regulator node houses sub-nodes for each regulator within the device. Each sub-node is identified using the node's name, with valid values listed for each @@ -122,6 +132,9 @@ pm8994: l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, l26, l27, l28, l29, l30, l31, l32, lvs1, lvs2 +pmi8994: + s1, s2, s3, l1 + The content of each sub-node is defined by the standard binding for regulators - see regulator.txt - with additional custom properties described below: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 7ff3f7903f26..00d3d58a102f 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -10,6 +10,7 @@ on the Qualcomm Hexagon core. "qcom,q6v5-pil", "qcom,msm8916-mss-pil", "qcom,msm8974-mss-pil" + "qcom,msm8996-mss-pil" - reg: Usage: required diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt new file mode 100644 index 000000000000..8562ba1dce69 --- /dev/null +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.txt @@ -0,0 +1,51 @@ +Qualcomm Remote File System Memory binding + +This binding describes the Qualcomm remote filesystem memory, which serves the +purpose of describing the shared memory region used for remote processors to +access block device data using the Remote Filesystem protocol. + +- compatible: + Usage: required + Value type: <stringlist> + Definition: must be: + "qcom,rmtfs-mem" + +- reg: + Usage: required for static allocation + Value type: <prop-encoded-array> + Definition: must specify base address and size of the memory region, + as described in reserved-memory.txt + +- size: + Usage: required for dynamic allocation + Value type: <prop-encoded-array> + Definition: must specify a size of the memory region, as described in + reserved-memory.txt + +- qcom,client-id: + Usage: required + Value type: <u32> + Definition: identifier of the client to use this region for buffers. + +- qcom,vmid: + Usage: optional + Value type: <u32> + Definition: vmid of the remote processor, to set up memory protection. + += EXAMPLE +The following example shows the remote filesystem memory setup for APQ8016, +with the rmtfs region for the Hexagon DSP (id #1) located at 0x86700000. + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + rmtfs@86700000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0 0x86700000 0x0 0xe0000>; + no-map; + + qcom,client-id = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt index c8f775714887..4ca66c96fe97 100644 --- a/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt +++ b/Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt @@ -14,7 +14,7 @@ Required properties: example: -ahb1_rst: reset@01c202c0 { +ahb1_rst: reset@1c202c0 { #reset-cells = <1>; compatible = "allwinner,sun6i-a31-ahb1-reset"; reg = <0x01c202c0 0xc>; diff --git a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt index 13301777e11c..6ed79e60248a 100644 --- a/Documentation/devicetree/bindings/reset/fsl,imx-src.txt +++ b/Documentation/devicetree/bindings/reset/fsl,imx-src.txt @@ -14,7 +14,7 @@ Required properties: example: -src: src@020d8000 { +src: src@20d8000 { compatible = "fsl,imx6q-src"; reg = <0x020d8000 0x4000>; interrupts = <0 91 0x04 0 96 0x04>; @@ -33,10 +33,10 @@ reset.txt example: - ipu1: ipu@02400000 { + ipu1: ipu@2400000 { resets = <&src 2>; }; - ipu2: ipu@02800000 { + ipu2: ipu@2800000 { resets = <&src 4>; }; diff --git a/Documentation/devicetree/bindings/reset/renesas,rst.txt b/Documentation/devicetree/bindings/reset/renesas,rst.txt index e5a03ffe04fb..a8014f3ab8ba 100644 --- a/Documentation/devicetree/bindings/reset/renesas,rst.txt +++ b/Documentation/devicetree/bindings/reset/renesas,rst.txt @@ -26,6 +26,7 @@ Required properties: - "renesas,r8a7794-rst" (R-Car E2) - "renesas,r8a7795-rst" (R-Car H3) - "renesas,r8a7796-rst" (R-Car M3-W) + - "renesas,r8a77970-rst" (R-Car V3M) - "renesas,r8a77995-rst" (R-Car D3) - reg: Address start and address range for the device. diff --git a/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt new file mode 100644 index 000000000000..32d8435a41df --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,axs10x-reset.txt @@ -0,0 +1,33 @@ +Binding for the AXS10x reset controller + +This binding describes the ARC AXS10x boards custom IP-block which allows +to control reset signals of selected peripherals. For example DW GMAC, etc... +This block is controlled via memory-mapped register (AKA CREG) which +represents up-to 32 reset lines. + +As of today only the following lines are used: + - DW GMAC - line 5 + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,axs10x-reset". +- reg: should always contain pair address - length: for creg reset + bits register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset-controller@11220 { + compatible = "snps,axs10x-reset"; + #reset-cells = <1>; + reg = <0x11220 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset 5>; + .... + }; diff --git a/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt new file mode 100644 index 000000000000..830069b1c37c --- /dev/null +++ b/Documentation/devicetree/bindings/reset/snps,hsdk-reset.txt @@ -0,0 +1,28 @@ +Binding for the Synopsys HSDK reset controller + +This binding uses the common reset binding[1]. + +[1] Documentation/devicetree/bindings/reset/reset.txt + +Required properties: +- compatible: should be "snps,hsdk-reset". +- reg: should always contain 2 pairs address - length: first for reset + configuration register and second for corresponding SW reset and status bits + register. +- #reset-cells: from common reset binding; Should always be set to 1. + +Example: + reset: reset@880 { + compatible = "snps,hsdk-reset"; + #reset-cells = <1>; + reg = <0x8A0 0x4>, <0xFF0 0x4>; + }; + +Specifying reset lines connected to IP modules: + ethernet@.... { + .... + resets = <&reset HSDK_V1_ETH_RESET>; + .... + }; + +The index could be found in <dt-bindings/reset/snps,hsdk-reset.h> diff --git a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt index c516d24959f2..86945502ccb5 100644 --- a/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt +++ b/Documentation/devicetree/bindings/reset/ti-syscon-reset.txt @@ -67,7 +67,7 @@ using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 / { soc { - psc: power-sleep-controller@02350000 { + psc: power-sleep-controller@2350000 { compatible = "syscon", "simple-mfd"; reg = <0x02350000 0x1000>; diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt index 68a6f487c409..93efed629900 100644 --- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt +++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt @@ -13,6 +13,7 @@ Required properties: "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-reset" - for LD11 SoC "socionext,uniphier-ld20-reset" - for LD20 SoC + "socionext,uniphier-pxs3-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -44,6 +45,7 @@ Required properties: "socionext,uniphier-ld11-mio-reset" - for LD11 SoC (MIO) "socionext,uniphier-ld11-sd-reset" - for LD11 SoC (SD) "socionext,uniphier-ld20-sd-reset" - for LD20 SoC + "socionext,uniphier-pxs3-sd-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: @@ -74,6 +76,7 @@ Required properties: "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC "socionext,uniphier-ld11-peri-reset" - for LD11 SoC "socionext,uniphier-ld20-peri-reset" - for LD20 SoC + "socionext,uniphier-pxs3-peri-reset" - for PXs3 SoC - #reset-cells: should be 1. Example: diff --git a/Documentation/devicetree/bindings/riscv/cpus.txt b/Documentation/devicetree/bindings/riscv/cpus.txt new file mode 100644 index 000000000000..adf7b7af5dc3 --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/cpus.txt @@ -0,0 +1,162 @@ +=================== +RISC-V CPU Bindings +=================== + +The device tree allows to describe the layout of CPUs in a system through +the "cpus" node, which in turn contains a number of subnodes (ie "cpu") +defining properties for every cpu. + +Bindings for CPU nodes follow the Devicetree Specification, available from: + +https://www.devicetree.org/specifications/ + +with updates for 32-bit and 64-bit RISC-V systems provided in this document. + +=========== +Terminology +=========== + +This document uses some terminology common to the RISC-V community that is not +widely used, the definitions of which are listed here: + +* hart: A hardware execution context, which contains all the state mandated by + the RISC-V ISA: a PC and some registers. This terminology is designed to + disambiguate software's view of execution contexts from any particular + microarchitectural implementation strategy. For example, my Intel laptop is + described as having one socket with two cores, each of which has two hyper + threads. Therefore this system has four harts. + +===================================== +cpus and cpu node bindings definition +===================================== + +The RISC-V architecture, in accordance with the Devicetree Specification, +requires the cpus and cpu nodes to be present and contain the properties +described below. + +- cpus node + + Description: Container of cpu nodes + + The node name must be "cpus". + + A cpus node must define the following properties: + + - #address-cells + Usage: required + Value type: <u32> + Definition: must be set to 1 + - #size-cells + Usage: required + Value type: <u32> + Definition: must be set to 0 + +- cpu node + + Description: Describes a hart context + + PROPERTIES + + - device_type + Usage: required + Value type: <string> + Definition: must be "cpu" + - reg + Usage: required + Value type: <u32> + Definition: The hart ID of this CPU node + - compatible: + Usage: required + Value type: <stringlist> + Definition: must contain "riscv", may contain one of + "sifive,rocket0" + - mmu-type: + Usage: optional + Value type: <string> + Definition: Specifies the CPU's MMU type. Possible values are + "riscv,sv32" + "riscv,sv39" + "riscv,sv48" + - riscv,isa: + Usage: required + Value type: <string> + Definition: Contains the RISC-V ISA string of this hart. These + ISA strings are defined by the RISC-V ISA manual. + +Example: SiFive Freedom U540G Development Kit +--------------------------------------------- + +This system contains two harts: a hart marked as disabled that's used for +low-level system tasks and should be ignored by Linux, and a second hart that +Linux is allowed to run on. + + cpus { + #address-cells = <1>; + #size-cells = <0>; + timebase-frequency = <1000000>; + cpu@0 { + clock-frequency = <1600000000>; + compatible = "sifive,rocket0", "riscv"; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <128>; + i-cache-size = <16384>; + next-level-cache = <&L15 &L0>; + reg = <0>; + riscv,isa = "rv64imac"; + status = "disabled"; + L10: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + cpu@1 { + clock-frequency = <1600000000>; + compatible = "sifive,rocket0", "riscv"; + d-cache-block-size = <64>; + d-cache-sets = <64>; + d-cache-size = <32768>; + d-tlb-sets = <1>; + d-tlb-size = <32>; + device_type = "cpu"; + i-cache-block-size = <64>; + i-cache-sets = <64>; + i-cache-size = <32768>; + i-tlb-sets = <1>; + i-tlb-size = <32>; + mmu-type = "riscv,sv39"; + next-level-cache = <&L15 &L0>; + reg = <1>; + riscv,isa = "rv64imafdc"; + status = "okay"; + tlb-split; + L13: interrupt-controller { + #interrupt-cells = <1>; + compatible = "riscv,cpu-intc"; + interrupt-controller; + }; + }; + }; + +Example: Spike ISA Simulator with 1 Hart +---------------------------------------- + +This device tree matches the Spike ISA golden model as run with `spike -p1`. + + cpus { + cpu@0 { + device_type = "cpu"; + reg = <0x00000000>; + status = "okay"; + compatible = "riscv"; + riscv,isa = "rv64imafdc"; + mmu-type = "riscv,sv48"; + clock-frequency = <0x3b9aca00>; + interrupt-controller { + #interrupt-cells = <0x00000001>; + interrupt-controller; + compatible = "riscv,cpu-intc"; + } + } + } diff --git a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt index e25a456664b9..0014da9145af 100644 --- a/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt +++ b/Documentation/devicetree/bindings/rng/brcm,iproc-rng200.txt @@ -1,7 +1,9 @@ HWRNG support for the iproc-rng200 driver Required properties: -- compatible : "brcm,iproc-rng200" +- compatible : Must be one of: + "brcm,bcm7278-rng200" + "brcm,iproc-rng200" - reg : base address and size of control register block Example: diff --git a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt b/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt deleted file mode 100644 index 916f57601a8f..000000000000 --- a/Documentation/devicetree/bindings/rtc/dallas,ds1339.txt +++ /dev/null @@ -1,18 +0,0 @@ -* Dallas DS1339 I2C Serial Real-Time Clock - -Required properties: -- compatible: Should contain "dallas,ds1339". -- reg: I2C address for chip - -Optional properties: -- trickle-resistor-ohms : Selected resistor for trickle charger - Values usable for ds1339 are 250, 2000, 4000 - Should be given if trickle charger should be enabled -- trickle-diode-disable : Do not use internal trickle charger diode - Should be given if internal trickle charger diode should be disabled -Example: - ds1339: rtc@68 { - compatible = "dallas,ds1339"; - trickle-resistor-ohms = <250>; - reg = <0x68>; - }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt new file mode 100644 index 000000000000..d28d6e7f6ae8 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-ds1307.txt @@ -0,0 +1,44 @@ +Dallas DS1307 and compatible RTC + +Required properties: +- compatible: should be one of: + "dallas,ds1307", + "dallas,ds1308", + "dallas,ds1337", + "dallas,ds1338", + "dallas,ds1339", + "dallas,ds1388", + "dallas,ds1340", + "dallas,ds1341", + "maxim,ds3231", + "st,m41t0", + "st,m41t00", + "microchip,mcp7940x", + "microchip,mcp7941x", + "pericom,pt7c4338", + "epson,rx8025", + "isil,isl12057" +- reg: I2C bus address of the device + +Optional properties: +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clock-output-names: From common clock binding to override the default output + clock name +- wakeup-source: Enables wake up of host system on alarm +- trickle-resistor-ohms : ds1339, ds1340 and ds 1388 only + Selected resistor for trickle charger + Possible values are 250, 2000, 4000 + Should be given if trickle charger should be enabled +- trickle-diode-disable : ds1339, ds1340 and ds 1388 only + Do not use internal trickle charger diode + Should be given if internal trickle charger diode should be disabled + +Example: + rtc1: ds1339@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupt-parent = <&gpio4>; + interrupts = <20 0>; + trickle-resistor-ohms = <250>; + }; diff --git a/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt new file mode 100644 index 000000000000..717d93860af1 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/rtc-m41t80.txt @@ -0,0 +1,31 @@ +ST M41T80 family of RTC and compatible + +Required properties: +- compatible: should be one of: + "st,m41t62", + "st,m41t65", + "st,m41t80", + "st,m41t81", + "st,m41t81s", + "st,m41t82", + "st,m41t83", + "st,m41t84", + "st,m41t85", + "st,m41t87", + "microcrystal,rv4162", +- reg: I2C bus address of the device + +Optional properties: +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clock-output-names: From common clock binding to override the default output + clock name +- wakeup-source: Enables wake up of host system on alarm + +Example: + rtc@68 { + compatible = "st,m41t80"; + reg = <0x68>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x8>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt new file mode 100644 index 000000000000..58885b55da21 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/sirf,prima2-sysrtc.txt @@ -0,0 +1,13 @@ +SiRFSoC Real Time Clock + +Required properties: +- compatible: must be "sirf,prima2-sysrtc" +- reg: address range of rtc register set. +- interrupts: rtc alarm interrupts. + +Example: + rtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; diff --git a/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt new file mode 100644 index 000000000000..3ebeb311335f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/stericsson,coh901331.txt @@ -0,0 +1,17 @@ +ST-Ericsson COH 901 331 Real Time Clock + +Required properties: +- compatible: must be "stericsson,coh901331" +- reg: address range of rtc register set. +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- clocks: phandle to the rtc clock source + +Example: + rtc: rtc@c0017000 { + compatible = "stericsson,coh901331"; + reg = <0xc0017000 0x1000>; + interrupt-parent = <&vicb>; + interrupts = <10>; + clocks = <&rtc_clk>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt index d5e26d313f62..12c083c1140a 100644 --- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt @@ -17,7 +17,7 @@ Required properties for new device trees Example: -rtc: rtc@01f00000 { +rtc: rtc@1f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <0 40 4>, <0 41 4>; diff --git a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt index 6983aad376c3..4a8d79c1cf08 100644 --- a/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sunxi-rtc.txt @@ -10,7 +10,7 @@ Required properties: Example: -rtc: rtc@01c20d00 { +rtc: rtc@1c20d00 { compatible = "allwinner,sun4i-a10-rtc"; reg = <0x01c20d00 0x20>; interrupts = <24>; diff --git a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt index 3eca6de6369d..a65d7b71e81a 100644 --- a/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt +++ b/Documentation/devicetree/bindings/security/tpm/tpm-i2c.txt @@ -8,6 +8,12 @@ Required properties: the firmware event log - linux,sml-size : size of the memory allocated for the firmware event log +Optional properties: + +- powered-while-suspended: present when the TPM is left powered on between + suspend and resume (makes the suspend/resume + callbacks do nothing). + Example (for OpenPower Systems with Nuvoton TPM 2.0 on I2C) ---------------------------------------------------------- diff --git a/Documentation/devicetree/bindings/serial/atmel-usart.txt b/Documentation/devicetree/bindings/serial/atmel-usart.txt index e6e6142e33ac..7c0d6b2f53e4 100644 --- a/Documentation/devicetree/bindings/serial/atmel-usart.txt +++ b/Documentation/devicetree/bindings/serial/atmel-usart.txt @@ -24,6 +24,7 @@ Optional properties: - dma-names: "rx" for RX channel, "tx" for TX channel. - atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO capable USARTs. +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt <chip> compatible description: - at91rm9200: legacy USART support diff --git a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt index 5c52e5eef16d..8b2b0460259a 100644 --- a/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt +++ b/Documentation/devicetree/bindings/serial/brcm,bcm6345-uart.txt @@ -11,6 +11,11 @@ Required properties: - clocks: Clock driving the hardware; used to figure out the baud rate divisor. + +Optional properties: + +- clock-names: Should be "refclk". + Example: uart0: serial@14e00520 { @@ -19,6 +24,7 @@ Example: interrupt-parent = <&periph_intc>; interrupts = <2>; clocks = <&periph_clk>; + clock-names = "refclk"; }; clocks { diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt index 574c3a2c77d5..860a9559839a 100644 --- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -9,6 +9,7 @@ Optional properties: - fsl,irda-mode : Indicate the uart supports irda mode - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works in DCE mode by default. +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt Please check Documentation/devicetree/bindings/serial/serial.txt for the complete list of generic properties. diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index a1252a047f78..59567b51cf09 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -16,6 +16,7 @@ Required properties: Optional properties: - dmas: A list of two dma specifiers, one for each entry in dma-names. - dma-names: should contain "tx" and "rx". +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt Note: Optional properties for DMA support. Write them both or both not. diff --git a/Documentation/devicetree/bindings/serial/mvebu-uart.txt b/Documentation/devicetree/bindings/serial/mvebu-uart.txt index 6087defd9f93..d37fabe17bd1 100644 --- a/Documentation/devicetree/bindings/serial/mvebu-uart.txt +++ b/Documentation/devicetree/bindings/serial/mvebu-uart.txt @@ -8,6 +8,6 @@ Required properties: Example: serial@12000 { compatible = "marvell,armada-3700-uart"; - reg = <0x12000 0x400>; + reg = <0x12000 0x200>; interrupts = <43>; }; diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt index 7a71b5de77d6..43eac675f21f 100644 --- a/Documentation/devicetree/bindings/serial/omap_serial.txt +++ b/Documentation/devicetree/bindings/serial/omap_serial.txt @@ -19,6 +19,7 @@ Optional properties: - dmas : DMA specifier, consisting of a phandle to the DMA controller node and a DMA channel number. - dma-names : "rx" for receive channel, "tx" for transmit channel. +- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt Example: diff --git a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt index 4fc96946f81d..cf504d0380ae 100644 --- a/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt +++ b/Documentation/devicetree/bindings/serial/renesas,sci-serial.txt @@ -41,6 +41,8 @@ Required properties: - "renesas,hscif-r8a7795" for R8A7795 (R-Car H3) HSCIF compatible UART. - "renesas,scif-r8a7796" for R8A7796 (R-Car M3-W) SCIF compatible UART. - "renesas,hscif-r8a7796" for R8A7796 (R-Car M3-W) HSCIF compatible UART. + - "renesas,scif-r8a77970" for R8A77970 (R-Car V3M) SCIF compatible UART. + - "renesas,hscif-r8a77970" for R8A77970 (R-Car V3M) HSCIF compatible UART. - "renesas,scif-r8a77995" for R8A77995 (R-Car D3) SCIF compatible UART. - "renesas,hscif-r8a77995" for R8A77995 (R-Car D3) HSCIF compatible UART. - "renesas,scifa-sh73a0" for SH73A0 (SH-Mobile AG5) SCIFA compatible UART. diff --git a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt index 3657f9f9d17a..d150b04a6229 100644 --- a/Documentation/devicetree/bindings/serial/st,stm32-usart.txt +++ b/Documentation/devicetree/bindings/serial/st,stm32-usart.txt @@ -2,14 +2,10 @@ Required properties: - compatible: can be either: - - "st,stm32-usart", - "st,stm32-uart", - - "st,stm32f7-usart", - "st,stm32f7-uart", - - "st,stm32h7-usart" - "st,stm32h7-uart". - depending on whether the device supports synchronous mode - and is compatible with stm32(f4), stm32f7 or stm32h7. + depending is compatible with stm32(f4), stm32f7 or stm32h7. - reg: The address and length of the peripheral registers space - interrupts: - The interrupt line for the USART instance, @@ -33,7 +29,7 @@ usart4: serial@40004c00 { }; usart2: serial@40004400 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40004400 0x400>; interrupts = <38>; clocks = <&clk_pclk1>; @@ -43,7 +39,7 @@ usart2: serial@40004400 { }; usart1: serial@40011000 { - compatible = "st,stm32-usart", "st,stm32-uart"; + compatible = "st,stm32-uart"; reg = <0x40011000 0x400>; interrupts = <37>; clocks = <&rcc 0 164>; diff --git a/Documentation/devicetree/bindings/soc/fsl/bman.txt b/Documentation/devicetree/bindings/soc/fsl/bman.txt index 47ac834414d8..48eed140765b 100644 --- a/Documentation/devicetree/bindings/soc/fsl/bman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/bman.txt @@ -65,8 +65,8 @@ to the respective BMan instance BMan Private Memory Node BMan requires a contiguous range of physical memory used for the backing store -for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as a -node under the /reserved-memory node +for BMan Free Buffer Proxy Records (FBPR). This memory is reserved/allocated as +a node under the /reserved-memory node. The BMan FBPR memory node must be named "bman-fbpr" @@ -75,7 +75,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,bman-fbpr" + Definition: PPC platforms: Must include "fsl,bman-fbpr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FBPR private memory: - The size must be 2^(size + 1), with size = 11..33. That is 4 KiB to @@ -100,10 +102,10 @@ The example below shows a BMan FBPR dynamic allocation memory node ranges; bman_fbpr: bman-fbpr { - compatible = "fsl,bman-fbpr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-mem-pool"; size = <0 0x1000000>; alignment = <0 0x1000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt index 60984260207b..09b1b05fa677 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/par_io.txt @@ -18,7 +18,7 @@ par_io@1400 { #size-cells = <0>; device_type = "par_io"; num-ports = <7>; - ucc_pin@01 { + ucc_pin@1 { ...... }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt index ec6ee2e864a2..5bde8b98a8c9 100644 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/qe/pincfg.txt @@ -26,7 +26,7 @@ Required properties: interrupts. Example: - ucc_pin@01 { + ucc_pin@1 { pio-map = < /* port pin dir open_drain assignment has_irq */ 0 3 1 0 1 0 /* TxD0 */ diff --git a/Documentation/devicetree/bindings/soc/fsl/qman.txt b/Documentation/devicetree/bindings/soc/fsl/qman.txt index 556ebb8be75d..ee96afd2af72 100644 --- a/Documentation/devicetree/bindings/soc/fsl/qman.txt +++ b/Documentation/devicetree/bindings/soc/fsl/qman.txt @@ -60,6 +60,12 @@ are located at offsets 0xbf8 and 0xbfc Value type: <prop-encoded-array> Definition: Reference input clock. Its frequency is half of the platform clock +- memory-regions + Usage: Required for ARM + Value type: <phandle array> + Definition: List of phandles referencing the QMan private memory + nodes (described below). The qman-fqd node must be + first followed by qman-pfdr node. Only used on ARM Devices connected to a QMan instance via Direct Connect Portals (DCP) must link to the respective QMan instance @@ -74,7 +80,9 @@ QMan Private Memory Nodes QMan requires two contiguous range of physical memory used for the backing store for QMan Frame Queue Descriptor (FQD) and Packed Frame Descriptor Record (PFDR). -This memory is reserved/allocated as a nodes under the /reserved-memory node +This memory is reserved/allocated as a node under the /reserved-memory node. + +For additional details about reserved memory regions see reserved-memory.txt The QMan FQD memory node must be named "qman-fqd" @@ -83,7 +91,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,qman-fqd" + Definition: PPC platforms: Must include "fsl,qman-fqd" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The QMan PFDR memory node must be named "qman-pfdr" @@ -92,7 +102,9 @@ PROPERTIES - compatible Usage: required Value type: <stringlist> - Definition: Must inclide "fsl,qman-pfdr" + Definition: PPC platforms: Must include "fsl,qman-pfdr" + ARM platforms: Must include "shared-dma-pool" + as well as the "no-map" property The following constraints are relevant to the FQD and PFDR private memory: - The size must be 2^(size + 1), with size = 11..29. That is 4 KiB to @@ -117,16 +129,16 @@ The example below shows a QMan FQD and a PFDR dynamic allocation memory nodes ranges; qman_fqd: qman-fqd { - compatible = "fsl,qman-fqd"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x400000>; alignment = <0 0x400000>; + no-map; }; qman_pfdr: qman-pfdr { - compatible = "fsl,qman-pfdr"; - alloc-ranges = <0 0 0x10 0>; + compatible = "shared-dma-pool"; size = <0 0x2000000>; alignment = <0 0x2000000>; + no-map; }; }; diff --git a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt index 107700d00df4..bf80e3f96f8c 100644 --- a/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt +++ b/Documentation/devicetree/bindings/soc/mediatek/pwrap.txt @@ -19,6 +19,7 @@ IP Pairing Required properties in pwrap device node. - compatible: "mediatek,mt2701-pwrap" for MT2701/7623 SoCs + "mediatek,mt7622-pwrap" for MT7622 SoCs "mediatek,mt8135-pwrap" for MT8135 SoCs "mediatek,mt8173-pwrap" for MT8173 SoCs - interrupts: IRQ for pwrap in SOC @@ -36,9 +37,12 @@ Required properties in pwrap device node. - clocks: Must contain an entry for each entry in clock-names. Optional properities: -- pmic: Mediatek PMIC MFD is the child device of pwrap +- pmic: Using either MediaTek PMIC MFD as the child device of pwrap See the following for child node definitions: Documentation/devicetree/bindings/mfd/mt6397.txt + or the regulator-only device as the child device of pwrap, such as MT6380. + See the following definitions for such kinds of devices. + Documentation/devicetree/bindings/regulator/mt6380-regulator.txt Example: pwrap: pwrap@1000f000 { diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt index b277eca861f7..9663cab52246 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt @@ -39,6 +39,14 @@ of these nodes are defined by the individual bindings for the specific function Definition: a list of channels tied to this function, used for matching the function to a set of virtual channels +- qcom,intents: + Usage: optional + Value type: <prop-encoded-array> + Definition: a list of size,amount pairs describing what intents should + be preallocated for this virtual channel. This can be used + to tweak the default intents available for the channel to + meet expectations of the remote. + = EXAMPLE The following example represents the GLINK RPM node on a MSM8996 device, with the function for the "rpm_request" channel defined, which is used for @@ -69,6 +77,8 @@ regualtors and root clocks. compatible = "qcom,rpm-msm8996"; qcom,glink-channels = "rpm_requests"; + qcom,intents = <0x400 5 + 0x800 1>; ... }; }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt index 4ea39e9186a7..042a2e4159bd 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.txt @@ -37,6 +37,11 @@ The following properties are defined to the bluetooth node: Definition: must be: "qcom,wcnss-bt" +- local-bd-address: + Usage: optional + Value type: <u8 array> + Definition: see Documentation/devicetree/bindings/net/bluetooth.txt + == WiFi The following properties are defined to the WiFi node: @@ -91,6 +96,9 @@ smd { bt { compatible = "qcom,wcnss-bt"; + + /* BD address 00:11:22:33:44:55 */ + local-bd-address = [ 55 44 33 22 11 00 ]; }; wlan { diff --git a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt index 66e6265fb0aa..f7b00a7c0f68 100644 --- a/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt +++ b/Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt @@ -51,7 +51,7 @@ of valid identifiers for k2g. Example (K2G): -------------------- - uart0: serial@02530c00 { + uart0: serial@2530c00 { compatible = "ns16550a"; ... power-domains = <&k2g_pds 0x002c>; diff --git a/Documentation/devicetree/bindings/sound/audio-graph-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-card.txt index 6e6720aa33f1..d04ea3b1a1dd 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-card.txt @@ -17,6 +17,7 @@ Below are same as Simple-Card. - bitclock-master - bitclock-inversion - frame-inversion +- mclk-fs - dai-tdm-slot-num - dai-tdm-slot-width - clocks / system-clock-frequency diff --git a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt index 8b8afe9fcb31..441dd6f29df1 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt +++ b/Documentation/devicetree/bindings/sound/audio-graph-scu-card.txt @@ -43,7 +43,7 @@ Example 1. Sampling Rate Conversion label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port>; @@ -79,7 +79,8 @@ Example 2. 2 CPU 1 Codec (Mixing) label = "sound-card"; prefix = "codec"; routing = "codec Playback", "DAI0 Playback", - "codec Playback", "DAI1 Playback"; + "codec Playback", "DAI1 Playback", + "DAI0 Capture", "codec Capture"; convert-rate = <48000>; dais = <&cpu_port0 diff --git a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt index befd125d18bb..860fc0da39c0 100644 --- a/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt +++ b/Documentation/devicetree/bindings/sound/cdns,xtfpga-i2s.txt @@ -9,7 +9,7 @@ Required properties: Examples: - i2s0: xtfpga-i2s@0d080000 { + i2s0: xtfpga-i2s@d080000 { #sound-dai-cells = <0>; compatible = "cdns,xtfpga-i2s"; reg = <0x0d080000 0x40>; diff --git a/Documentation/devicetree/bindings/sound/cs42l56.txt b/Documentation/devicetree/bindings/sound/cs42l56.txt index 4feb0eb27ea4..4ba520a28ae8 100644 --- a/Documentation/devicetree/bindings/sound/cs42l56.txt +++ b/Documentation/devicetree/bindings/sound/cs42l56.txt @@ -55,7 +55,7 @@ Example: codec: codec@4b { compatible = "cirrus,cs42l56"; reg = <0x4b>; - gpio-reset = <&gpio 10 0>; + cirrus,gpio-nreset = <&gpio 10 0>; cirrus,chgfreq-divisor = <0x05>; cirrus.ain1_ref_cfg; cirrus,micbias-lvl = <5>; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt index 65979b205893..f5a14115b459 100644 --- a/Documentation/devicetree/bindings/sound/fsl,asrc.txt +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -41,7 +41,7 @@ Required properties: Example: -asrc: asrc@02034000 { +asrc: asrc@2034000 { compatible = "fsl,imx53-asrc"; reg = <0x02034000 0x4000>; interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sound/fsl,esai.txt b/Documentation/devicetree/bindings/sound/fsl,esai.txt index 21c401e2ccda..cacd18bb9ba6 100644 --- a/Documentation/devicetree/bindings/sound/fsl,esai.txt +++ b/Documentation/devicetree/bindings/sound/fsl,esai.txt @@ -48,7 +48,7 @@ Required properties: Example: -esai: esai@02024000 { +esai: esai@2024000 { compatible = "fsl,imx35-esai"; reg = <0x02024000 0x4000>; interrupts = <0 51 0x04>; diff --git a/Documentation/devicetree/bindings/sound/fsl,spdif.txt b/Documentation/devicetree/bindings/sound/fsl,spdif.txt index 0f97e54c3d43..38cfa7573441 100644 --- a/Documentation/devicetree/bindings/sound/fsl,spdif.txt +++ b/Documentation/devicetree/bindings/sound/fsl,spdif.txt @@ -39,7 +39,7 @@ Required properties: Example: -spdif: spdif@02004000 { +spdif: spdif@2004000 { compatible = "fsl,imx35-spdif"; reg = <0x02004000 0x4000>; interrupts = <0 52 0x04>; diff --git a/Documentation/devicetree/bindings/sound/imx-audmux.txt b/Documentation/devicetree/bindings/sound/imx-audmux.txt index b30a737e209e..2db4dcbee1b9 100644 --- a/Documentation/devicetree/bindings/sound/imx-audmux.txt +++ b/Documentation/devicetree/bindings/sound/imx-audmux.txt @@ -22,7 +22,7 @@ Required properties of optional child nodes: Example: -audmux@021d8000 { +audmux@21d8000 { compatible = "fsl,imx6q-audmux", "fsl,imx31-audmux"; reg = <0x021d8000 0x4000>; }; diff --git a/Documentation/devicetree/bindings/sound/rt5514.txt b/Documentation/devicetree/bindings/sound/rt5514.txt index 929ca6756b02..4f33b0d96afe 100644 --- a/Documentation/devicetree/bindings/sound/rt5514.txt +++ b/Documentation/devicetree/bindings/sound/rt5514.txt @@ -1,22 +1,27 @@ RT5514 audio CODEC -This device supports I2C only. +This device supports both I2C and SPI. Required properties: - compatible : "realtek,rt5514". -- reg : The I2C address of the device. +- reg : the I2C address of the device for I2C, the chip select + number for SPI. Optional properties: - clocks: The phandle of the master clock to the CODEC - clock-names: Should be "mclk" +- interrupt-parent: The phandle for the interrupt controller. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - realtek,dmic-init-delay-ms - Set the DMIC initial delay (ms) to wait it ready. + Set the DMIC initial delay (ms) to wait it ready for I2C. -Pins on the device (for linking into audio routes) for RT5514: +Pins on the device (for linking into audio routes) for I2C: * DMIC1L * DMIC1R diff --git a/Documentation/devicetree/bindings/sound/rt5663.txt b/Documentation/devicetree/bindings/sound/rt5663.txt index ff381718c517..497bcfc58b71 100644 --- a/Documentation/devicetree/bindings/sound/rt5663.txt +++ b/Documentation/devicetree/bindings/sound/rt5663.txt @@ -19,6 +19,22 @@ Optional properties: Based on the different PCB layout, add the manual offset value to compensate the DC offset for each L and R channel, and they are different between headphone and headset. +- "realtek,impedance_sensing_num" + The matrix row number of the impedance sensing table. + If the value is 0, it means the impedance sensing is not supported. +- "realtek,impedance_sensing_table" + The matrix rows of the impedance sensing table are consisted by impedance + minimum, impedance maximun, volume, DC offset w/o and w/ mic of each L and + R channel accordingly. Example is shown as following. + < 0 300 7 0xffd160 0xffd1c0 0xff8a10 0xff8ab0 + 301 65535 4 0xffe470 0xffe470 0xffb8e0 0xffb8e0> + The first and second column are defined for the impedance range. If the + detected impedance value is in the range, then the volume value of the + third column will be set to codec. In our codec design, each volume value + should compensate different DC offset to avoid the pop sound, and it is + also different between headphone and headset. In the example, the + "realtek,impedance_sensing_num" is 2. It means that there are 2 ranges of + impedance in the impedance sensing function. Pins on the device (for linking into audio routes) for RT5663: diff --git a/Documentation/devicetree/bindings/sound/samsung-i2s.txt b/Documentation/devicetree/bindings/sound/samsung-i2s.txt index 09e0e18591ae..bf100cd0d0f7 100644 --- a/Documentation/devicetree/bindings/sound/samsung-i2s.txt +++ b/Documentation/devicetree/bindings/sound/samsung-i2s.txt @@ -63,7 +63,7 @@ Optional SoC Specific Properties: Example: -i2s0: i2s@03830000 { +i2s0: i2s@3830000 { compatible = "samsung,s5pv210-i2s"; reg = <0x03830000 0x100>; dmas = <&pdma0 10 diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 7a73a9d62015..060cb4a3b47e 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -37,7 +37,7 @@ VDDIO 1.8V 2.5V 3.3V Example: -codec: sgtl5000@0a { +codec: sgtl5000@a { compatible = "fsl,sgtl5000"; reg = <0x0a>; clocks = <&clks 150>; diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt index f1c5ae59e7c9..1f9cd7095337 100644 --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt @@ -10,13 +10,21 @@ Required properties: - reg: Base address and size of SAI common register set. - clocks: Must contain phandle and clock specifier pairs for each entry in clock-names. - - clock-names: Must contain "x8k" and "x11k" + - clock-names: Must contain "pclk" "x8k" and "x11k" + "pclk": Clock which feeds the peripheral bus interface. + Mandatory for "st,stm32h7-sai" compatible. + Not used for "st,stm32f4-sai" compatible. "x8k": SAI parent clock for sampling rates multiple of 8kHz. "x11k": SAI parent clock for sampling rates multiple of 11.025kHz. - interrupts: cpu DAI interrupt line shared by SAI sub-blocks Optional properties: - resets: Reference to a reset controller asserting the SAI + - st,sync: specify synchronization mode. + By default SAI sub-block is in asynchronous mode. + This property sets SAI sub-block as slave of another SAI sub-block. + Must contain the phandle and index of the sai sub-block providing + the synchronization. SAI subnodes: Two subnodes corresponding to SAI sub-block instances A et B can be defined. @@ -52,8 +60,8 @@ sai1: sai1@40015800 { #size-cells = <1>; ranges = <0 0x40015800 0x400>; reg = <0x40015800 0x4>; - clocks = <&rcc PLL1_Q>, <&rcc PLL2_P>; - clock-names = "x8k", "x11k"; + clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>; + clock-names = "pclk", "x8k", "x11k"; interrupts = <87>; sai1a: audio-controller@40015804 { diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt index 2d4e10deb6f4..66579bbd3294 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -62,7 +62,7 @@ Required properties for the following compatibles: block in the PRCM. Example: -codec: codec@01c22c00 { +codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun7i-a20-codec"; reg = <0x01c22c00 0x40>; @@ -73,7 +73,7 @@ codec: codec@01c22c00 { dma-names = "rx", "tx"; }; -codec: codec@01c22c00 { +codec: codec@1c22c00 { #sound-dai-cells = <0>; compatible = "allwinner,sun6i-a31-codec"; reg = <0x01c22c00 0x98>; diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt index fc5da6080759..05d7135a8d2f 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -28,7 +28,7 @@ Required properties for the following compatibles: Example: -i2s0: i2s@01c22400 { +i2s0: i2s@1c22400 { #sound-dai-cells = <0>; compatible = "allwinner,sun4i-a10-i2s"; reg = <0x01c22400 0x400>; diff --git a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt index 399b1b4bae22..2ca3d138528e 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-a33-codec.txt @@ -48,7 +48,7 @@ are similar to A33 using simple-card: sound-dai = <&codec>; }; - soc@01c00000 { + soc@1c00000 { [...] audio-codec@1c22e00 { diff --git a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt index 1b6e7c4e50ab..07356758bd91 100644 --- a/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt +++ b/Documentation/devicetree/bindings/sound/sun8i-codec-analog.txt @@ -10,7 +10,7 @@ Required properties if not a sub-node of the PRCM node: - reg: must contain the registers location and length Example: -prcm: prcm@01f01400 { +prcm: prcm@1f01400 { codec_analog: codec-analog { compatible = "allwinner,sun8i-a23-codec-analog"; }; diff --git a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt index 70ee177901d3..0c64a209c2e9 100644 --- a/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt +++ b/Documentation/devicetree/bindings/sound/sunxi,sun4i-spdif.txt @@ -31,7 +31,7 @@ Required properties: Example: -spdif: spdif@01c21000 { +spdif: spdif@1c21000 { compatible = "allwinner,sun4i-a10-spdif"; reg = <0x01c21000 0x40>; interrupts = <13>; diff --git a/Documentation/devicetree/bindings/sound/tfa9879.txt b/Documentation/devicetree/bindings/sound/tfa9879.txt new file mode 100644 index 000000000000..23ba522d9e2b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tfa9879.txt @@ -0,0 +1,23 @@ +NXP TFA9879 class-D audio amplifier + +Required properties: + +- compatible : "nxp,tfa9879" + +- reg : the I2C address of the device + +Example: + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: tfa9879@6c { + #sound-dai-cells = <0>; + compatible = "nxp,tfa9879"; + reg = <0x6c>; + }; +}; + diff --git a/Documentation/devicetree/bindings/sound/wlf,arizona.txt b/Documentation/devicetree/bindings/sound/wlf,arizona.txt new file mode 100644 index 000000000000..e172c62dc2df --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wlf,arizona.txt @@ -0,0 +1,53 @@ +Cirrus Logic Arizona class audio SoCs + +These devices are audio SoCs with extensive digital capabilities and a range +of analogue I/O. + +This document lists sound specific bindings, see the primary binding +document: + ../mfd/arizona.txt + +Optional properties: + + - wlf,inmode : A list of INn_MODE register values, where n is the number + of input signals. Valid values are 0 (Differential), 1 (Single-ended) and + 2 (Digital Microphone). If absent, INn_MODE registers set to 0 by default. + If present, values must be specified less than or equal to the number of + input signals. If values less than the number of input signals, elements + that have not been specified are set to 0 by default. Entries are: + <IN1, IN2, IN3, IN4> (wm5102, wm5110, wm8280, wm8997) + <IN1A, IN2A, IN1B, IN2B> (wm8998, wm1814) + - wlf,out-mono : A list of boolean values indicating whether each output is + mono or stereo. Position within the list indicates the output affected + (eg. First entry in the list corresponds to output 1). A non-zero value + indicates a mono output. If present, the number of values should be less + than or equal to the number of outputs, if less values are supplied the + additional outputs will be treated as stereo. + + - wlf,dmic-ref : DMIC reference voltage source for each input, can be + selected from either MICVDD or one of the MICBIAS's, defines + (ARIZONA_DMIC_xxxx) are provided in <dt-bindings/mfd/arizona.txt>. If + present, the number of values should be less than or equal to the + number of inputs, unspecified inputs will use the chip default. + + - wlf,max-channels-clocked : The maximum number of channels to be clocked on + each AIF, useful for I2S systems with multiple data lines being mastered. + Specify one cell for each AIF to be configured, specify zero for AIFs that + should be handled normally. + If present, number of cells must be less than or equal to the number of + AIFs. If less than the number of AIFs, for cells that have not been + specified the corresponding AIFs will be treated as default setting. + + - wlf,spk-fmt : PDM speaker data format, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,spk-mute : PDM speaker mute setting, must contain 2 cells (OUT5 and OUT6). + See the datasheet for values. + The second cell is ignored for codecs that do not have OUT6 (wm5102, wm8997, + wm8998, wm1814) + + - wlf,out-volume-limit : The volume limit value that should be applied to each + output channel. See the datasheet for exact values. Channels are specified + in the order OUT1L, OUT1R, OUT2L, OUT2R, etc. diff --git a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt index b5a5ca4502f9..09231d7586b2 100644 --- a/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt +++ b/Documentation/devicetree/bindings/sound/zte,zx-spdif.txt @@ -16,7 +16,7 @@ please check: * dma/dma.txt Example: - spdif0: spdif0@0b004000 { + spdif0: spdif0@b004000 { compatible = "zte,zx296702-spdif"; reg = <0x0b004000 0x1000>; clocks = <&lsp0clk ZX296702_SPDIF0_DIV>; diff --git a/Documentation/devicetree/bindings/spi/sh-msiof.txt b/Documentation/devicetree/bindings/spi/sh-msiof.txt index e865855726a2..bdd83959019c 100644 --- a/Documentation/devicetree/bindings/spi/sh-msiof.txt +++ b/Documentation/devicetree/bindings/spi/sh-msiof.txt @@ -1,7 +1,9 @@ Renesas MSIOF spi controller Required properties: -- compatible : "renesas,msiof-r8a7790" (R-Car H2) +- compatible : "renesas,msiof-r8a7743" (RZ/G1M) + "renesas,msiof-r8a7745" (RZ/G1E) + "renesas,msiof-r8a7790" (R-Car H2) "renesas,msiof-r8a7791" (R-Car M2-W) "renesas,msiof-r8a7792" (R-Car V2H) "renesas,msiof-r8a7793" (R-Car M2-N) @@ -10,7 +12,7 @@ Required properties: "renesas,msiof-r8a7796" (R-Car M3-W) "renesas,msiof-sh73a0" (SH-Mobile AG5) "renesas,sh-mobile-msiof" (generic SH-Mobile compatibile device) - "renesas,rcar-gen2-msiof" (generic R-Car Gen2 compatible device) + "renesas,rcar-gen2-msiof" (generic R-Car Gen2 and RZ/G1 compatible device) "renesas,rcar-gen3-msiof" (generic R-Car Gen3 compatible device) "renesas,sh-msiof" (deprecated) diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index f5916c92fe91..1925277bfc1e 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -24,6 +24,16 @@ Required properties: based on a specific SoC configuration. - interrupts: interrupt number mapped to CPU. - clocks: spi clk phandle + For 66AK2G this property should be set per binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +SoC-specific Required Properties: + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the SPI device id + value. This property is as per the binding, Optional: - cs-gpios: gpio chip selects diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt index 13b1fcc8469e..dcc7eaada511 100644 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt @@ -5,6 +5,7 @@ Required properties: "fsl,ls2085a-dspi" or "fsl,ls2080a-dspi" followed by "fsl,ls2085a-dspi" + "fsl,ls1012a-dspi" followed by "fsl,ls1021a-v1.0-dspi" - reg : Offset and length of the register set for the device - interrupts : Should contain SPI controller interrupt - clocks: from common clock binding: handle to dspi clock. diff --git a/Documentation/devicetree/bindings/spi/spi-rspi.txt b/Documentation/devicetree/bindings/spi/spi-rspi.txt index 8f4169f63936..3b02b3a7cfb2 100644 --- a/Documentation/devicetree/bindings/spi/spi-rspi.txt +++ b/Documentation/devicetree/bindings/spi/spi-rspi.txt @@ -5,11 +5,14 @@ Required properties: "renesas,rspi-<soctype>", "renesas,rspi" as fallback. For Renesas Serial Peripheral Interface on RZ/A1H: "renesas,rspi-<soctype>", "renesas,rspi-rz" as fallback. - For Quad Serial Peripheral Interface on R-Car Gen2: + For Quad Serial Peripheral Interface on R-Car Gen2 and + RZ/G1 devices: "renesas,qspi-<soctype>", "renesas,qspi" as fallback. Examples with soctypes are: - "renesas,rspi-sh7757" (SH) - "renesas,rspi-r7s72100" (RZ/A1H) + - "renesas,qspi-r8a7743" (RZ/G1M) + - "renesas,qspi-r8a7745" (RZ/G1E) - "renesas,qspi-r8a7790" (R-Car H2) - "renesas,qspi-r8a7791" (R-Car M2-W) - "renesas,qspi-r8a7792" (R-Car V2H) diff --git a/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt new file mode 100644 index 000000000000..8de589b376ce --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-sprd-adi.txt @@ -0,0 +1,58 @@ +Spreadtrum ADI controller + +ADI is the abbreviation of Anolog-Digital interface, which is used to access +analog chip (such as PMIC) from digital chip. ADI controller follows the SPI +framework for its hardware implementation is alike to SPI bus and its timing +is compatile to SPI timing. + +ADI controller has 50 channels including 2 software read/write channels and +48 hardware channels to access analog chip. For 2 software read/write channels, +users should set ADI registers to access analog chip. For hardware channels, +we can configure them to allow other hardware components to use it independently, +which means we can just link one analog chip address to one hardware channel, +then users can access the mapped analog chip address by this hardware channel +triggered by hardware components instead of ADI software channels. + +Thus we introduce one property named "sprd,hw-channels" to configure hardware +channels, the first value specifies the hardware channel id which is used to +transfer data triggered by hardware automatically, and the second value specifies +the analog chip address where user want to access by hardware components. + +Since we have multi-subsystems will use unique ADI to access analog chip, when +one system is reading/writing data by ADI software channels, that should be under +one hardware spinlock protection to prevent other systems from reading/writing +data by ADI software channels at the same time, or two parallel routine of setting +ADI registers will make ADI controller registers chaos to lead incorrect results. +Then we need one hardware spinlock to synchronize between the multiple subsystems. + +Required properties: +- compatible: Should be "sprd,sc9860-adi". +- reg: Offset and length of ADI-SPI controller register space. +- hwlocks: Reference to a phandle of a hwlock provider node. +- hwlock-names: Reference to hwlock name strings defined in the same order + as the hwlocks, should be "adi". +- #address-cells: Number of cells required to define a chip select address + on the ADI-SPI bus. Should be set to 1. +- #size-cells: Size of cells required to define a chip select address size + on the ADI-SPI bus. Should be set to 0. + +Optional properties: +- sprd,hw-channels: This is an array of channel values up to 49 channels. + The first value specifies the hardware channel id which is used to + transfer data triggered by hardware automatically, and the second + value specifies the analog chip address where user want to access + by hardware components. + +SPI slave nodes must be children of the SPI controller node and can contain +properties described in Documentation/devicetree/bindings/spi/spi-bus.txt. + +Example: + adi_bus: spi@40030000 { + compatible = "sprd,sc9860-adi"; + reg = <0 0x40030000 0 0x10000>; + hwlocks = <&hwlock1 0>; + hwlock-names = "adi"; + #address-cells = <1>; + #size-cells = <0>; + sprd,hw-channels = <30 0x8c20>; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-sun4i.txt b/Documentation/devicetree/bindings/spi/spi-sun4i.txt index 484bbff5337e..c75d604a8290 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun4i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun4i.txt @@ -12,7 +12,7 @@ Required properties: Example: -spi1: spi@01c06000 { +spi1: spi@1c06000 { compatible = "allwinner,sun4i-a10-spi"; reg = <0x01c06000 0x1000>; interrupts = <11>; diff --git a/Documentation/devicetree/bindings/spi/spi-sun6i.txt b/Documentation/devicetree/bindings/spi/spi-sun6i.txt index ab1811354cce..435a8e0731ac 100644 --- a/Documentation/devicetree/bindings/spi/spi-sun6i.txt +++ b/Documentation/devicetree/bindings/spi/spi-sun6i.txt @@ -19,7 +19,7 @@ Optional properties: Example: -spi1: spi@01c69000 { +spi1: spi@1c69000 { compatible = "allwinner,sun6i-a31-spi"; reg = <0x01c69000 0x1000>; interrupts = <0 66 4>; @@ -28,7 +28,7 @@ spi1: spi@01c69000 { resets = <&ahb1_rst 21>; }; -spi0: spi@01c68000 { +spi0: spi@1c68000 { compatible = "allwinner,sun8i-h3-spi"; reg = <0x01c68000 0x1000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; diff --git a/Documentation/devicetree/bindings/sram/samsung-sram.txt b/Documentation/devicetree/bindings/sram/samsung-sram.txt index 6bc474b2b885..61a9bbed303d 100644 --- a/Documentation/devicetree/bindings/sram/samsung-sram.txt +++ b/Documentation/devicetree/bindings/sram/samsung-sram.txt @@ -19,7 +19,7 @@ found in Documentation/devicetree/bindings/sram/sram.txt Example: - sysram@02020000 { + sysram@2020000 { compatible = "mmio-sram"; reg = <0x02020000 0x54000>; #address-cells = <1>; diff --git a/Documentation/devicetree/bindings/sram/sunxi-sram.txt b/Documentation/devicetree/bindings/sram/sunxi-sram.txt index 6bb92a1df753..d087f04a4d7f 100644 --- a/Documentation/devicetree/bindings/sram/sunxi-sram.txt +++ b/Documentation/devicetree/bindings/sram/sunxi-sram.txt @@ -47,7 +47,7 @@ This valid values for this argument are: Example ------- -sram-controller@01c00000 { +sram-controller@1c00000 { compatible = "allwinner,sun4i-a10-sram-controller"; reg = <0x01c00000 0x30>; #address-cells = <1>; @@ -68,7 +68,7 @@ sram-controller@01c00000 { }; }; -emac: ethernet@01c0b000 { +emac: ethernet@1c0b000 { compatible = "allwinner,sun4i-a10-emac"; ... diff --git a/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt new file mode 100644 index 000000000000..9d43553a8d39 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,avs-tmon.txt @@ -0,0 +1,20 @@ +* Broadcom STB thermal management + +Thermal management core, provided by the AVS TMON hardware block. + +Required properties: +- compatible: must be "brcm,avs-tmon" and/or "brcm,avs-tmon-bcm7445" +- reg: address range for the AVS TMON registers +- interrupts: temperature monitor interrupt, for high/low threshold triggers +- interrupt-names: should be "tmon" +- interrupt-parent: the parent interrupt controller + +Example: + + thermal@f04d1500 { + compatible = "brcm,avs-tmon-bcm7445", "brcm,avs-tmon"; + reg = <0xf04d1500 0x28>; + interrupts = <0x6>; + interrupt-names = "tmon"; + interrupt-parent = <&avs_host_l2_intc>; + }; diff --git a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt index d48fc5280d5a..cef716a236f1 100644 --- a/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/hisilicon-thermal.txt @@ -13,6 +13,7 @@ Example : +for Hi6220: tsensor: tsensor@0,f7030700 { compatible = "hisilicon,tsensor"; reg = <0x0 0xf7030700 0x0 0x1000>; @@ -21,3 +22,11 @@ Example : clock-names = "thermal_clk"; #thermal-sensor-cells = <1>; } + +for Hi3660: + tsensor: tsensor@fff30000 { + compatible = "hisilicon,hi3660-tsensor"; + reg = <0x0 0xfff30000 0x0 0x1000>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.txt b/Documentation/devicetree/bindings/thermal/imx-thermal.txt index 3c67bd50aa10..28be51afdb6a 100644 --- a/Documentation/devicetree/bindings/thermal/imx-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/imx-thermal.txt @@ -7,10 +7,17 @@ Required properties: is higher than panic threshold, system will auto reboot by SRC module. - fsl,tempmon : phandle pointer to system controller that contains TEMPMON control registers, e.g. ANATOP on imx6q. +- nvmem-cells: A phandle to the calibration cells provided by ocotp. +- nvmem-cell-names: Should be "calib", "temp_grade". + +Deprecated properties: - fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON calibration data, e.g. OCOTP on imx6q. The details about calibration data can be found in SoC Reference Manual. +Direct access to OCOTP via fsl,tempmon-data is incorrect on some newer chips +because it does not handle OCOTP clock requirements. + Optional properties: - clocks : thermal sensor's clock source. diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt new file mode 100644 index 000000000000..276387dd6815 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra186-bpmp-thermal.txt @@ -0,0 +1,32 @@ +NVIDIA Tegra186 BPMP thermal sensor + +In Tegra186, the BPMP (Boot and Power Management Processor) implements an +interface that is used to read system temperatures, including CPU cluster +and GPU temperatures. This binding describes the thermal sensor that is +exposed by BPMP. + +The BPMP thermal node must be located directly inside the main BPMP node. See +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. + +This node represents a thermal sensor. See thermal.txt for details of the +core thermal binding. + +Required properties: +- compatible: + Array of strings. + One of: + - "nvidia,tegra186-bpmp-thermal". +- #thermal-sensor-cells: Cell for sensor index. + Single-cell integer. + Must be <1>. + +Example: + +bpmp { + ... + + bpmp_thermal: thermal { + compatible = "nvidia,tegra186-bpmp-thermal"; + #thermal-sensor-cells = <1>; + }; +}; diff --git a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt index e3a6234fb1ac..43d744e5305e 100644 --- a/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rockchip-thermal.txt @@ -2,6 +2,7 @@ Required properties: - compatible : should be "rockchip,<name>-tsadc" + "rockchip,rv1108-tsadc": found on RV1108 SoCs "rockchip,rk3228-tsadc": found on RK3228 SoCs "rockchip,rk3288-tsadc": found on RK3288 SoCs "rockchip,rk3328-tsadc": found on RK3328 SoCs diff --git a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt index 8d6e4fd2468e..2c5c1be78360 100644 --- a/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt +++ b/Documentation/devicetree/bindings/timer/allwinner,sun5i-a13-hstimer.txt @@ -14,7 +14,7 @@ Optional properties: Example: -timer@01c60000 { +timer@1c60000 { compatible = "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; interrupts = <0 51 1>, diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt index 6ca6b9e582a0..d740989eb569 100644 --- a/Documentation/devicetree/bindings/timer/renesas,cmt.txt +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -20,16 +20,16 @@ Required Properties: (CMT1 on sh73a0 and r8a7740) This is a fallback for the above renesas,cmt-48-* entries. - - "renesas,cmt0-r8a73a4" for the 32-bit CMT0 device included in r8a73a4. - - "renesas,cmt1-r8a73a4" for the 48-bit CMT1 device included in r8a73a4. - - "renesas,cmt0-r8a7790" for the 32-bit CMT0 device included in r8a7790. - - "renesas,cmt1-r8a7790" for the 48-bit CMT1 device included in r8a7790. - - "renesas,cmt0-r8a7791" for the 32-bit CMT0 device included in r8a7791. - - "renesas,cmt1-r8a7791" for the 48-bit CMT1 device included in r8a7791. - - "renesas,cmt0-r8a7793" for the 32-bit CMT0 device included in r8a7793. - - "renesas,cmt1-r8a7793" for the 48-bit CMT1 device included in r8a7793. - - "renesas,cmt0-r8a7794" for the 32-bit CMT0 device included in r8a7794. - - "renesas,cmt1-r8a7794" for the 48-bit CMT1 device included in r8a7794. + - "renesas,r8a73a4-cmt0" for the 32-bit CMT0 device included in r8a73a4. + - "renesas,r8a73a4-cmt1" for the 48-bit CMT1 device included in r8a73a4. + - "renesas,r8a7790-cmt0" for the 32-bit CMT0 device included in r8a7790. + - "renesas,r8a7790-cmt1" for the 48-bit CMT1 device included in r8a7790. + - "renesas,r8a7791-cmt0" for the 32-bit CMT0 device included in r8a7791. + - "renesas,r8a7791-cmt1" for the 48-bit CMT1 device included in r8a7791. + - "renesas,r8a7793-cmt0" for the 32-bit CMT0 device included in r8a7793. + - "renesas,r8a7793-cmt1" for the 48-bit CMT1 device included in r8a7793. + - "renesas,r8a7794-cmt0" for the 32-bit CMT0 device included in r8a7794. + - "renesas,r8a7794-cmt1" for the 48-bit CMT1 device included in r8a7794. - "renesas,rcar-gen2-cmt0" for 32-bit CMT0 devices included in R-Car Gen2. - "renesas,rcar-gen2-cmt1" for 48-bit CMT1 devices included in R-Car Gen2. @@ -46,7 +46,7 @@ Required Properties: Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes cmt0: timer@ffca0000 { - compatible = "renesas,cmt0-r8a7790", "renesas,rcar-gen2-cmt0"; + compatible = "renesas,r8a7790-cmt0", "renesas,rcar-gen2-cmt0"; reg = <0 0xffca0000 0 0x1004>; interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, <0 142 IRQ_TYPE_LEVEL_HIGH>; @@ -55,7 +55,7 @@ Example: R8A7790 (R-Car H2) CMT0 and CMT1 nodes }; cmt1: timer@e6130000 { - compatible = "renesas,cmt1-r8a7790", "renesas,rcar-gen2-cmt1"; + compatible = "renesas,r8a7790-cmt1", "renesas,rcar-gen2-cmt1"; reg = <0 0xe6130000 0 0x1004>; interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, <0 121 IRQ_TYPE_LEVEL_HIGH>, diff --git a/Documentation/devicetree/bindings/trivial-devices.txt b/Documentation/devicetree/bindings/trivial-devices.txt index aae37352c574..5f3143f97098 100644 --- a/Documentation/devicetree/bindings/trivial-devices.txt +++ b/Documentation/devicetree/bindings/trivial-devices.txt @@ -36,11 +36,9 @@ atmel,at97sc3204t i2c trusted platform module (TPM) capella,cm32181 CM32181: Ambient Light Sensor capella,cm3232 CM3232: Ambient Light Sensor cirrus,cs42l51 Cirrus Logic CS42L51 audio codec -dallas,ds1307 64 x 8, Serial, I2C Real-Time Clock -dallas,ds1338 I2C RTC with 56-Byte NV RAM -dallas,ds1340 I2C RTC with Trickle Charger dallas,ds1374 I2C, 32-Bit Binary Counter Watchdog RTC with Trickle Charger and Reset Input/Output dallas,ds1631 High-Precision Digital Thermometer +dallas,ds1672 Dallas DS1672 Real-time Clock dallas,ds1682 Total-Elapsed-Time Recorder with Alarm dallas,ds1775 Tiny Digital Thermometer and Thermostat dallas,ds3232 Extremely Accurate I²C RTC with Integrated Crystal and SRAM @@ -54,10 +52,9 @@ dlg,da9063 DA9063: system PMIC for quad-core application processors domintech,dmard09 DMARD09: 3-axis Accelerometer domintech,dmard10 DMARD10: 3-axis Accelerometer epson,rx8010 I2C-BUS INTERFACE REAL TIME CLOCK MODULE -epson,rx8025 High-Stability. I2C-Bus INTERFACE REAL TIME CLOCK MODULE epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE +emmicro,em3027 EM Microelectronic EM3027 Real-time Clock fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer -fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 fsl,mma7660 MMA7660FC: 3-Axis Orientation/Motion Detection Sensor fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer fsl,mpl3115 MPL3115: Absolute Digital Pressure Sensor @@ -67,10 +64,13 @@ gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire In infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz) infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz) isil,isl1208 Intersil ISL1208 Low Power RTC with Battery Backed SRAM +isil,isl1218 Intersil ISL1218 Low Power RTC with Battery Backed SRAM +isil,isl12022 Intersil ISL12022 Real-time Clock isil,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor isil,isl29030 Intersil ISL29030 Ambient Light and Proximity Sensor maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs +maxim,max6621 PECI-to-I2C translator for PECI-to-SMBus/I2C protocol conversion maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface mcube,mc3230 mCube 3-axis 8-bit digital accelerometer memsic,mxc6225 MEMSIC 2-axis 8-bit digital accelerometer @@ -155,6 +155,7 @@ nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset nxp,pcf2127 Real-time clock nxp,pcf2129 Real-time clock +nxp,pcf8523 Real-time Clock nxp,pcf8563 Real-time clock/calendar nxp,pcf85063 Tiny Real-Time Clock oki,ml86v7667 OKI ML86V7667 video decoder @@ -174,10 +175,6 @@ sii,s35390a 2-wire CMOS real-time clock silabs,si7020 Relative Humidity and Temperature Sensors skyworks,sky81452 Skyworks SKY81452: Six-Channel White LED Driver with Touch Panel Bias Supply st,24c256 i2c serial eeprom (24cxx) -st,m41t0 Serial real-time clock (RTC) -st,m41t00 Serial real-time clock (RTC) -st,m41t62 Serial real-time clock (RTC) with alarm -st,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,ads7828 8-Channels, 12-bit ADC ti,ads7830 8-Channels, 8-bit ADC diff --git a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt index cb2bd83fa89a..50abb20fe319 100644 --- a/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt +++ b/Documentation/devicetree/bindings/usb/allwinner,sun4i-a10-musb.txt @@ -16,7 +16,7 @@ Required properties: Example: - usb_otg: usb@01c13000 { + usb_otg: usb@1c13000 { compatible = "allwinner,sun4i-a10-musb"; reg = <0x01c13000 0x0400>; clocks = <&ahb_gates 0>; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt index 16920d78e1b8..7a33f22c815a 100644 --- a/Documentation/devicetree/bindings/usb/am33xx-usb.txt +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -181,7 +181,7 @@ usb: usb@47400000 { "tx14", "tx15"; }; - cppi41dma: dma-controller@07402000 { + cppi41dma: dma-controller@7402000 { compatible = "ti,am3359-cppi41"; reg = <0x47400000 0x1000 0x47402000 0x1000 diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt index ad8ea56a9ed3..44e80153b148 100644 --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt @@ -18,7 +18,7 @@ Required properties: - atmel,oc-gpio: If present, specifies a gpio that needs to be activated for the overcurrent detection. -usb0: ohci@00500000 { +usb0: ohci@500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; @@ -39,7 +39,7 @@ Required properties: "ehci_clk" for the peripheral clock "usb_clk" for the UTMI clock -usb1: ehci@00800000 { +usb1: ehci@800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 4>; diff --git a/Documentation/devicetree/bindings/usb/dwc2.txt b/Documentation/devicetree/bindings/usb/dwc2.txt index fcf199b64d3d..e64d903bcbe8 100644 --- a/Documentation/devicetree/bindings/usb/dwc2.txt +++ b/Documentation/devicetree/bindings/usb/dwc2.txt @@ -19,6 +19,8 @@ Required properties: configured in FS mode; - "st,stm32f4x9-hsotg": The DWC2 USB HS controller instance in STM32F4x9 SoCs configured in HS mode; + - "st,stm32f7xx-hsotg": The DWC2 USB HS controller instance in STM32F7xx SoCs + configured in HS mode; - reg : Should contain 1 register range (address and length) - interrupts : Should contain 1 interrupt - clocks: clock provider specifier diff --git a/Documentation/devicetree/bindings/usb/maxim,max3421.txt b/Documentation/devicetree/bindings/usb/maxim,max3421.txt new file mode 100644 index 000000000000..8cdbe0c85188 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/maxim,max3421.txt @@ -0,0 +1,26 @@ +Maxim Integrated SPI-based USB 2.0 host controller MAX3421E + +Required properties: + - compatible: Should be "maxim,max3421" + - spi-max-frequency: maximum frequency for this device must not exceed 26 MHz. + - reg: chip select number to which this device is connected. + - maxim,vbus-en-pin: <GPOUTx ACTIVE_LEVEL> + GPOUTx is the number (1-8) of the GPOUT pin of MAX3421E to drive Vbus. + ACTIVE_LEVEL is 0 or 1. + - interrupts: the interrupt line description for the interrupt controller. + The driver configures MAX3421E for active low level triggered interrupts, + configure your interrupt line accordingly. + +Optional property: + - interrupt-parent: the phandle to the associated interrupt controller. + +Example: + + usb@0 { + compatible = "maxim,max3421"; + reg = <0>; + maxim,vbus-en-pin = <3 1>; + spi-max-frequency = <26000000>; + interrupt-parent = <&PIC>; + interrupts = <42>; + }; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt index 5611a2e4ddf0..30595964876a 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt @@ -26,10 +26,11 @@ Required properties: - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - clock-names : must contain - "sys_ck": for clock of xHCI MAC - "ref_ck": for reference clock of xHCI MAC - "wakeup_deb_p0": for USB wakeup debounce clock of port0 - "wakeup_deb_p1": for USB wakeup debounce clock of port1 + "sys_ck": controller clock used by normal mode, + the following ones are optional: + "ref_ck": reference clock used by low power mode etc, + "mcu_ck": mcu_bus clock for register access, + "dma_ck": dma_bus clock for data transfer by DMA - phys : a list of phandle + phy specifier pairs @@ -38,6 +39,8 @@ Optional properties: mode; - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup control register, it depends on "mediatek,wakeup-src". + - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc; - vbus-supply : reference to the VBUS regulator; - usb3-lpm-capable : supports USB3.0 LPM - pinctrl-names : a pinctrl state named "default" must be defined @@ -55,9 +58,7 @@ usb30: usb@11270000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; + clock-names = "sys_ck", "ref_ck"; phys = <&phy_port0 PHY_TYPE_USB3>, <&phy_port1 PHY_TYPE_USB2>; vusb33-supply = <&mt6397_vusb_reg>; @@ -89,9 +90,8 @@ Required properties: - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - - clock-names : must be - "sys_ck": for clock of xHCI MAC - "ref_ck": for reference clock of xHCI MAC + - clock-names : must contain "sys_ck", and the following ones are optional: + "ref_ck", "mcu_ck" and "dma_ck" Optional properties: - vbus-supply : reference to the VBUS regulator; diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt index 49f54767cd21..b2271d8e6b50 100644 --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt @@ -14,9 +14,9 @@ Required properties: - vusb33-supply : regulator of USB avdd3.3v - clocks : a list of phandle + clock-specifier pairs, one for each entry in clock-names - - clock-names : must contain "sys_ck" and "ref_ck" for clock of controller; - "wakeup_deb_p0" and "wakeup_deb_p1" are optional, they are - depends on "mediatek,enable-wakeup" + - clock-names : must contain "sys_ck" for clock of controller, + the following clocks are optional: + "ref_ck", "mcu_ck" and "dam_ck"; - phys : a list of phandle + phy specifier pairs - dr_mode : should be one of "host", "peripheral" or "otg", refer to usb/generic.txt @@ -30,9 +30,10 @@ Optional properties: when supports dual-role mode. - vbus-supply : reference to the VBUS regulator, needed when supports dual-role mode. - - pinctl-names : a pinctrl state named "default" must be defined, - "id_float" and "id_ground" are optinal which depends on - "mediatek,enable-manual-drd" + - pinctrl-names : a pinctrl state named "default" is optional, and need be + defined if auto drd switch is enabled, that means the property dr_mode + is set as "otg", and meanwhile the property "mediatek,enable-manual-drd" + is not set. - pinctrl-0 : pin control group See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -44,6 +45,8 @@ Optional properties: - mediatek,enable-wakeup : supports ip sleep wakeup used by host mode - mediatek,syscon-wakeup : phandle to syscon used to access USB wakeup control register, it depends on "mediatek,enable-wakeup". + - mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0, + bit1 for u3port1, ... etc; Sub-nodes: The xhci should be added as subnode to mtu3 as shown in the following example @@ -63,9 +66,7 @@ ssusb: usb@11271000 { clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>, <&pericfg CLK_PERI_USB0>, <&pericfg CLK_PERI_USB1>; - clock-names = "sys_ck", "ref_ck", - "wakeup_deb_p0", - "wakeup_deb_p1"; + clock-names = "sys_ck", "ref_ck"; vusb33-supply = <&mt6397_vusb_reg>; vbus-supply = <&usb_p0_vbus>; extcon = <&extcon_usb>; diff --git a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt index 2dc8f67eda39..24a826d5015e 100644 --- a/Documentation/devicetree/bindings/usb/ohci-da8xx.txt +++ b/Documentation/devicetree/bindings/usb/ohci-da8xx.txt @@ -13,7 +13,7 @@ Optional properties: Example: -ohci: usb@0225000 { +ohci: usb@225000 { compatible = "ti,da830-ohci"; reg = <0x225000 0x1000>; interrupts = <59>; diff --git a/Documentation/devicetree/bindings/usb/renesas_usb3.txt b/Documentation/devicetree/bindings/usb/renesas_usb3.txt index e28025883b79..87a45e2f9b7f 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usb3.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usb3.txt @@ -15,6 +15,10 @@ Required properties: - interrupts: Interrupt specifier for the USB3.0 Peripheral - clocks: clock phandle and specifier pair +Optional properties: + - phys: phandle + phy specifier pair + - phy-names: must be "usb" + Example of R-Car H3 ES1.x: usb3_peri0: usb@ee020000 { compatible = "renesas,r8a7795-usb3-peri", diff --git a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt index 9e18e000339e..47394ab788e3 100644 --- a/Documentation/devicetree/bindings/usb/renesas_usbhs.txt +++ b/Documentation/devicetree/bindings/usb/renesas_usbhs.txt @@ -3,6 +3,8 @@ Renesas Electronics USBHS driver Required properties: - compatible: Must contain one or more of the following: + - "renesas,usbhs-r8a7743" for r8a7743 (RZ/G1M) compatible device + - "renesas,usbhs-r8a7745" for r8a7745 (RZ/G1E) compatible device - "renesas,usbhs-r8a7790" for r8a7790 (R-Car H2) compatible device - "renesas,usbhs-r8a7791" for r8a7791 (R-Car M2-W) compatible device - "renesas,usbhs-r8a7792" for r8a7792 (R-Car V2H) compatible device @@ -10,7 +12,8 @@ Required properties: - "renesas,usbhs-r8a7794" for r8a7794 (R-Car E2) compatible device - "renesas,usbhs-r8a7795" for r8a7795 (R-Car H3) compatible device - "renesas,usbhs-r8a7796" for r8a7796 (R-Car M3-W) compatible device - - "renesas,rcar-gen2-usbhs" for R-Car Gen2 compatible device + - "renesas,usbhs-r8a77995" for r8a77995 (R-Car D3) compatible device + - "renesas,rcar-gen2-usbhs" for R-Car Gen2 or RZ/G1 compatible devices - "renesas,rcar-gen3-usbhs" for R-Car Gen3 compatible device When compatible with the generic version, nodes must list the diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt index ce02cebac26a..1b27cebb47f4 100644 --- a/Documentation/devicetree/bindings/usb/usb-device.txt +++ b/Documentation/devicetree/bindings/usb/usb-device.txt @@ -4,24 +4,35 @@ Usually, we only use device tree for hard wired USB device. The reference binding doc is from: http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps + Required properties: -- compatible: usbVID,PID. The textual representation of VID, PID shall - be in lower case hexadecimal with leading zeroes suppressed. The - other compatible strings from the above standard binding could also - be used, but a device adhering to this binding may leave out all except - for usbVID,PID. -- reg: the port number which this device is connecting to, the range - is 1-31. +- compatible: "usbVID,PID", where VID is the vendor id and PID the product id. + The textual representation of VID and PID shall be in lower case hexadecimal + with leading zeroes suppressed. The other compatible strings from the above + standard binding could also be used, but a device adhering to this binding + may leave out all except for "usbVID,PID". +- reg: the number of the USB hub port or the USB host-controller port to which + this device is attached. The range is 1-255. + + +Required properties for hub nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 -Example: -&usb1 { +Required properties for host-controller nodes with device nodes: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + + +Example: +&usb1 { /* host controller */ #address-cells = <1>; #size-cells = <0>; - hub: genesys@1 { + hub@1 { /* hub connected to port 1 */ compatible = "usb5e3,608"; reg = <1>; }; -} +}; diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index a12d6012a40f..3efde12b5d68 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -30,7 +30,7 @@ Example (Sequoia 440EPx): }; Example (Allwinner sun4i A10 SoC): - ehci0: usb@01c14000 { + ehci0: usb@1c14000 { compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; reg = <0x01c14000 0x100>; interrupts = <39>; diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt index 5be01c859b7a..4dc6a8ee3071 100644 --- a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt @@ -2,6 +2,7 @@ USB NOP PHY Required properties: - compatible: should be usb-nop-xceiv +- #phy-cells: Must be 0 Optional properties: - clocks: phandle to the PHY clock. Use as per Documentation/devicetree @@ -33,6 +34,7 @@ Example: reset-gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; vbus-detect-gpio = <&gpio2 13 GPIO_ACTIVE_HIGH>; vbus-regulator = <&vbus_regulator>; + #phy-cells = <0>; }; hsusb1_phy is a NOP USB PHY device that gets its clock from an oscillator diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index e8766b08c93b..09e70c875bc6 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -19,7 +19,7 @@ Optional properties: Example: - ohci0: usb@01c14400 { + ohci0: usb@1c14400 { compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; reg = <0x01c14400 0x100>; interrupts = <64>; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 2d80b60eeabe..ae6e484a8d7c 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -26,6 +26,7 @@ Required properties: Optional properties: - clocks: reference to a clock + - usb2-lpm-disable: indicate if we don't want to enable USB2 HW LPM - usb3-lpm-capable: determines if platform is USB3 LPM capable - quirk-broken-port-ped: set if the controller has broken port disable mechanism diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt index 3957d4edaa74..168ff819e827 100644 --- a/Documentation/devicetree/bindings/usb/usb251xb.txt +++ b/Documentation/devicetree/bindings/usb/usb251xb.txt @@ -1,16 +1,17 @@ Microchip USB 2.0 Hi-Speed Hub Controller -The device node for the configuration of a Microchip USB251xB/xBi USB 2.0 +The device node for the configuration of a Microchip USB251x/xBi USB 2.0 Hi-Speed Controller. Required properties : - compatible : Should be "microchip,usb251xb" or one of the specific types: "microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b", - "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi" - - reset-gpios : Should specify the gpio for hub reset + "microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi", + "microchip,usb2517", "microchip,usb2517i" - reg : I2C address on the selected bus (default is <0x2C>) Optional properties : + - reset-gpios : Should specify the gpio for hub reset - skip-config : Skip Hub configuration, but only send the USB-Attach command - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424) - product-id : Set USB Product ID of the hub (16 bit, default depends on type) @@ -19,29 +20,47 @@ Optional properties : - manufacturer : Set USB Manufacturer string (max 31 characters long) - product : Set USB Product string (max 31 characters long) - serial : Set USB Serial string (max 31 characters long) - - {bus,self}-powered : selects between self- and bus-powered operation (default - is self-powered) - - disable-hi-speed : disable USB Hi-Speed support + - {bus,self}-powered : selects between self- and bus-powered operation + (boolean, default is self-powered) + - disable-hi-speed : disable USB Hi-Speed support (boolean) - {multi,single}-tt : selects between multi- and single-transaction-translator - (default is multi-tt) - - disable-eop : disable End of Packet generation in full-speed mode + (boolean, default is multi-tt) + - disable-eop : disable End of Packet generation in full-speed mode (boolean) - {ganged,individual}-sensing : select over-current sense type in self-powered - mode (default is individual) + mode (boolean, default is individual) - {ganged,individual}-port-switching : select port power switching mode - (default is individual) + (boolean, default is individual) - dynamic-power-switching : enable auto-switching from self- to bus-powered - operation if the local power source is removed or unavailable + operation if the local power source is removed or unavailable (boolean) - oc-delay-us : Delay time (in microseconds) for filtering the over-current sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If an invalid value is given, the default is used instead. - - compound-device : indicate the hub is part of a compound device - - port-mapping-mode : enable port mapping mode + - compound-device : indicate the hub is part of a compound device (boolean) + - port-mapping-mode : enable port mapping mode (boolean) + - led-{usb,speed}-mode : led usb/speed indication mode selection + (boolean, default is speed mode) - string-support : enable string descriptor support (required for manufacturer, product and serial string configuration) - non-removable-ports : Should specify the ports which have a non-removable device connected. - sp-disabled-ports : Specifies the ports which will be self-power disabled - bp-disabled-ports : Specifies the ports which will be bus-power disabled + - sp-max-total-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry including a permanently + attached peripheral (range: 0 - 100000 uA, default 1000 uA) + - bp-max-total-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry including a permanently + attached peripheral (range: 0 - 510000 uA, default 100000 uA) + - sp-max-removable-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry excluding a permanently + attached peripheral (range: 0 - 100000 uA, default 1000 uA) + - bp-max-removable-current-microamp: Specifies max current consumed by the hub + from VBUS when operating in self-powered hub. It includes the hub + silicon along with all associated circuitry excluding a permanently + attached peripheral (range: 0 - 510000 uA, default 100000 uA) - power-on-time-ms : Specifies the time it takes from the time the host initiates the power-on sequence to a port until the port has adequate power. The value is given in ms in a 0 - 510 range (default is 100ms). @@ -56,7 +75,6 @@ Examples: usb2514b@2c { compatible = "microchip,usb2514b"; reg = <0x2c>; - reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; vendor-id = /bits/ 16 <0x0000>; product-id = /bits/ 16 <0x0000>; string-support; diff --git a/Documentation/devicetree/bindings/usb/usb3503.txt b/Documentation/devicetree/bindings/usb/usb3503.txt index c1a0a9191d26..057dd384d473 100644 --- a/Documentation/devicetree/bindings/usb/usb3503.txt +++ b/Documentation/devicetree/bindings/usb/usb3503.txt @@ -26,7 +26,7 @@ Optional properties: clock frequencies table is used) Examples: - usb3503@08 { + usb3503@8 { compatible = "smsc,usb3503"; reg = <0x08>; connect-gpios = <&gpx3 0 1>; diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt index f1e27faf528e..a85a631ec434 100644 --- a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -10,7 +10,7 @@ Required properties: - reg: Should contain registers location and length Examples: -usbmisc@02184800 { +usbmisc@2184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 1ea1fd4232ab..0994bdd82cd3 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -3,8 +3,8 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order. This isn't an exhaustive list, but you should add new prefixes to it before using them to avoid name-space collisions. -abcn Abracon Corporation abilis Abilis Systems +abracon Abracon Corporation actions Actions Semiconductor Co., Ltd. active-semi Active-Semi International Inc ad Avionic Design GmbH @@ -18,6 +18,7 @@ al Annapurna Labs allwinner Allwinner Technology Co., Ltd. alphascale AlphaScale Integrated Circuits Systems, Inc. altr Altera Corp. +amarula Amarula Solutions amazon Amazon.com, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) amd Advanced Micro Devices (AMD), Inc. @@ -83,6 +84,7 @@ davicom DAVICOM Semiconductor, Inc. delta Delta Electronics, Inc. denx Denx Software Engineering devantech Devantech, Ltd. +dh DH electronics GmbH digi Digi International Inc. digilent Diglent, Inc. dioo Dioo Microcircuit Co., Ltd @@ -113,6 +115,7 @@ everspin Everspin Technologies, Inc. exar Exar Corporation excito Excito ezchip EZchip Semiconductor +fairphone Fairphone B.V. faraday Faraday Technology Corporation fcs Fairchild Semiconductor firefly Firefly @@ -137,6 +140,7 @@ gw Gateworks Corporation hannstar HannStar Display Corporation haoyu Haoyu Microelectronic Co. Ltd. hardkernel Hardkernel Co., Ltd +hideep HiDeep Inc. himax Himax Technologies, Inc. hisilicon Hisilicon Limited. hit Hitachi Ltd. @@ -197,6 +201,7 @@ mcube mCube meas Measurement Specialties mediatek MediaTek Inc. megachips MegaChips +mele Shenzhen MeLE Digital Technology Ltd. melexis Melexis N.V. melfas MELFAS Inc. mellanox Mellanox Technologies @@ -229,12 +234,14 @@ netlogic Broadcom Corporation (formerly NetLogic Microsystems) netron-dy Netron DY netxeon Shenzhen Netxeon Technology CO., LTD nexbox Nexbox +nextthing Next Thing Co. newhaven Newhaven Display International ni National Instruments nintendo Nintendo nlt NLT Technologies, Ltd. nokia Nokia nordic Nordic Semiconductor +nutsboard NutsBoard nuvoton Nuvoton Technology Corporation nvd New Vision Display nvidia NVIDIA @@ -245,9 +252,12 @@ olimex OLIMEX Ltd. onion Onion Corporation onnn ON Semiconductor Corp. ontat On Tat Industrial Company +opalkelly Opal Kelly Incorporated opencores OpenCores.org +openrisc OpenRISC.io option Option NV ORCL Oracle Corporation +orisetech Orise Technology ortustech Ortus Technology Co., Ltd. ovti OmniVision Technologies oxsemi Oxford Semiconductor, Ltd. @@ -263,6 +273,7 @@ plathome Plat'Home Co., Ltd. plda PLDA poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) +probox2 PROBOX2 (by W2COMP Co., Ltd.) pulsedlight PulsedLight, Inc qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc @@ -296,6 +307,7 @@ sensirion Sensirion AG sff Small Form Factor Committee sgx SGX Sensortech sharp Sharp Corporation +shimafuji Shimafuji Electric, Inc. si-en Si-En Technology Ltd. sigma Sigma Designs, Inc. sii Seiko Instruments, Inc. @@ -317,6 +329,7 @@ solomon Solomon Systech Limited sony Sony Corporation spansion Spansion Inc. sprd Spreadtrum Communications Inc. +sst Silicon Storage Technology, Inc. st STMicroelectronics starry Starry Electronic Technology (ShenZhen) Co., LTD startek Startek @@ -329,6 +342,7 @@ swir Sierra Wireless syna Synaptics Inc. synology Synology, Inc. tbs TBS Technologies +tbs-biometrics Touchless Biometric Systems AG tcg Trusted Computing Group tcl Toby Churchill Ltd. technexion TechNexion @@ -338,6 +352,7 @@ thine THine Electronics, Inc. ti Texas Instruments tianma Tianma Micro-electronics Co., Ltd. tlm Trusted Logic Mobility +tmt Tecon Microprocessor Technologies, LLC. topeet Topeet toradex Toradex AG toshiba Toshiba Corporation @@ -351,6 +366,7 @@ truly Truly Semiconductors Limited tsd Theobroma Systems Design und Consulting GmbH tyan Tyan Computer Corporation ucrobotics uCRobotics +ubnt Ubiquiti Networks udoo Udoo uniwest United Western Technologies Corp (UniWest) upisemi uPI Semiconductor Corp. diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt index 235de0683bb6..5b38a30e608c 100644 --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt @@ -13,7 +13,7 @@ Required properties: Example: -wdt: watchdog@010000000 { +wdt: watchdog@10000000 { compatible = "mediatek,mt6589-wdt"; reg = <0x10000000 0x18>; }; diff --git a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt index b8f75c51453a..62dd5baad70e 100644 --- a/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt @@ -8,7 +8,7 @@ Required properties: Example: -wdt: watchdog@01c20c90 { +wdt: watchdog@1c20c90 { compatible = "allwinner,sun4i-a10-wdt"; reg = <0x01c20c90 0x10>; }; |