diff options
Diffstat (limited to 'Documentation/devicetree/bindings')
9 files changed, 246 insertions, 296 deletions
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml index 25688571ee7c..4193492ba73e 100644 --- a/Documentation/devicetree/bindings/firmware/qcom,scm.yaml +++ b/Documentation/devicetree/bindings/firmware/qcom,scm.yaml @@ -38,6 +38,7 @@ properties: - qcom,scm-msm8994 - qcom,scm-msm8996 - qcom,scm-msm8998 + - qcom,scm-qdu1000 - qcom,scm-sc7180 - qcom,scm-sc7280 - qcom,scm-sc8280xp @@ -73,6 +74,12 @@ properties: '#reset-cells': const: 1 + interrupts: + description: + The wait-queue interrupt that firmware raises as part of handshake + protocol to handle sleeping SCM calls. + maxItems: 1 + qcom,dload-mode: $ref: /schemas/types.yaml#/definitions/phandle-array items: @@ -82,6 +89,32 @@ properties: description: TCSR hardware block allOf: + # Clocks + - if: + properties: + compatible: + contains: + enum: + - qcom,scm-apq8064 + - qcom,scm-apq8084 + - qcom,scm-mdm9607 + - qcom,scm-msm8226 + - qcom,scm-msm8660 + - qcom,scm-msm8916 + - qcom,scm-msm8953 + - qcom,scm-msm8960 + - qcom,scm-msm8974 + - qcom,scm-msm8976 + - qcom,scm-sm6375 + then: + required: + - clocks + - clock-names + else: + properties: + clock-names: false + clocks: false + - if: properties: compatible: @@ -100,10 +133,6 @@ allOf: clocks: maxItems: 1 - required: - - clocks - - clock-names - - if: properties: compatible: @@ -111,6 +140,7 @@ allOf: enum: - qcom,scm-apq8084 - qcom,scm-mdm9607 + - qcom,scm-msm8226 - qcom,scm-msm8916 - qcom,scm-msm8953 - qcom,scm-msm8974 @@ -127,9 +157,29 @@ allOf: minItems: 3 maxItems: 3 - required: - - clocks - - clock-names + # Interconnects + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,scm-sm8450 + then: + properties: + interconnects: false + + # Interrupts + - if: + not: + properties: + compatible: + contains: + enum: + - qcom,scm-sm8450 + then: + properties: + interrupts: false required: - compatible diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt deleted file mode 100644 index b823b8625243..000000000000 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ /dev/null @@ -1,283 +0,0 @@ -Qualcomm Resource Power Manager (RPM) - -This driver is used to interface with the Resource Power Manager (RPM) found in -various Qualcomm platforms. The RPM allows each component in the system to vote -for state of the system resources, such as clocks, regulators and bus -frequencies. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-apq8064" - "qcom,rpm-msm8660" - "qcom,rpm-msm8960" - "qcom,rpm-ipq8064" - "qcom,rpm-mdm9615" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: base address and size of the RPM's message ram - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: three entries specifying the RPM's: - 1. acknowledgement interrupt - 2. error interrupt - 3. wakeup interrupt - -- interrupt-names: - Usage: required - Value type: <string-array> - Definition: must be the three strings "ack", "err" and "wakeup", in order - -- qcom,ipc: - Usage: required - Value type: <prop-encoded-array> - - Definition: three entries specifying the outgoing ipc bit used for - signaling the RPM: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - - -= SUBNODES - -The RPM exposes resources to its subnodes. The below bindings specify the set -of valid subnodes that can operate on these resources. - -== Regulators - -Regulator nodes are identified by their compatible: - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-pm8058-regulators" - "qcom,rpm-pm8901-regulators" - "qcom,rpm-pm8921-regulators" - "qcom,rpm-pm8018-regulators" - "qcom,rpm-smb208-regulators" - -- vdd_l0_l1_lvs-supply: -- vdd_l2_l11_l12-supply: -- vdd_l3_l4_l5-supply: -- vdd_l6_l7-supply: -- vdd_l8-supply: -- vdd_l9-supply: -- vdd_l10-supply: -- vdd_l13_l16-supply: -- vdd_l14_l15-supply: -- vdd_l17_l18-supply: -- vdd_l19_l20-supply: -- vdd_l21-supply: -- vdd_l22-supply: -- vdd_l23_l24_l25-supply: -- vdd_ncp-supply: -- vdd_s0-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: - Usage: optional (pm8058 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- lvs0_in-supply: -- lvs1_in-supply: -- lvs2_in-supply: -- lvs3_in-supply: -- mvs_in-supply: -- vdd_l0-supply: -- vdd_l1-supply: -- vdd_l2-supply: -- vdd_l3-supply: -- vdd_l4-supply: -- vdd_l5-supply: -- vdd_l6-supply: -- vdd_s0-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: - Usage: optional (pm8901 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_l1_l2_l12_l18-supply: -- vdd_l3_l15_l17-supply: -- vdd_l4_l14-supply: -- vdd_l5_l8_l16-supply: -- vdd_l6_l7-supply: -- vdd_l9_l11-supply: -- vdd_l10_l22-supply: -- vdd_l21_l23_l29-supply: -- vdd_l24-supply: -- vdd_l25-supply: -- vdd_l26-supply: -- vdd_l27-supply: -- vdd_l28-supply: -- vdd_ncp-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vin_5vs-supply: -- vin_lvs1_3_6-supply: -- vin_lvs2-supply: -- vin_lvs4_5_7-supply: - Usage: optional (pm8921 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vin_lvs1-supply: -- vdd_l7-supply: -- vdd_l8-supply: -- vdd_l9_l10_l11_l12-supply: - Usage: optional (pm8018 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -The regulator node houses sub-nodes for each regulator within the device. Each -sub-node is identified using the node's name, with valid values listed for each -of the pmics below. - -pm8058: - l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, - l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, - lvs0, lvs1, ncp - -pm8901: - l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, - mvs - -pm8921: - s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, - l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, - ncp - -pm8018: - s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, lvs1 - -smb208: - s1a, s1b, s2a, s2b - -The content of each sub-node is defined by the standard binding for regulators - -see regulator.txt - with additional custom properties described below: - -=== Switch-mode Power Supply regulator custom properties - -- bias-pull-down: - Usage: optional - Value type: <empty> - Definition: enable pull down of the regulator when inactive - -- qcom,switch-mode-frequency: - Usage: required - Value type: <u32> - Definition: Frequency (Hz) of the switch-mode power supply; - must be one of: - 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, - 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, - 1480000, 1370000, 1280000, 1200000 - -- qcom,force-mode: - Usage: optional (default if no other qcom,force-mode is specified) - Value type: <u32> - Definition: indicates that the regulator should be forced to a - particular mode, valid values are: - QCOM_RPM_FORCE_MODE_NONE - do not force any mode - QCOM_RPM_FORCE_MODE_LPM - force into low power mode - QCOM_RPM_FORCE_MODE_HPM - force into high power mode - QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically - select its own mode based on - realtime current draw, only for: - pm8921 smps and ftsmps - -- qcom,power-mode-hysteretic: - Usage: optional - Value type: <empty> - Definition: select that the power supply should operate in hysteretic - mode, instead of the default pwm mode - -=== Low-dropout regulator custom properties - -- bias-pull-down: - Usage: optional - Value type: <empty> - Definition: enable pull down of the regulator when inactive - -- qcom,force-mode: - Usage: optional - Value type: <u32> - Definition: indicates that the regulator should not be forced to any - particular mode, valid values are: - QCOM_RPM_FORCE_MODE_NONE - do not force any mode - QCOM_RPM_FORCE_MODE_LPM - force into low power mode - QCOM_RPM_FORCE_MODE_HPM - force into high power mode - QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass - mode, i.e. to act as a switch - and not regulate, only for: - pm8921 pldo, nldo and nldo1200 - -=== Negative Charge Pump custom properties - -- qcom,switch-mode-frequency: - Usage: required - Value type: <u32> - Definition: Frequency (Hz) of the switch mode power supply; - must be one of: - 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, - 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, - 1480000, 1370000, 1280000, 1200000 - -= EXAMPLE - - #include <dt-bindings/mfd/qcom-rpm.h> - - rpm@108000 { - compatible = "qcom,rpm-msm8960"; - reg = <0x108000 0x1000>; - qcom,ipc = <&apcs 0x8 2>; - - interrupts = <0 19 0>, <0 21 0>, <0 22 0>; - interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - - s1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - bias-pull-down; - - qcom,switch-mode-frequency = <3200000>; - }; - - pm8921_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - - qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; - }; - }; - }; - diff --git a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml index 633d49884019..afad3135ed67 100644 --- a/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml +++ b/Documentation/devicetree/bindings/power/qcom,rpmpd.yaml @@ -30,6 +30,7 @@ properties: - qcom,qcs404-rpmpd - qcom,qdu1000-rpmhpd - qcom,sa8540p-rpmhpd + - qcom,sa8775p-rpmhpd - qcom,sdm660-rpmpd - qcom,sc7180-rpmhpd - qcom,sc7280-rpmhpd @@ -39,7 +40,6 @@ properties: - qcom,sdm845-rpmhpd - qcom,sdx55-rpmhpd - qcom,sdx65-rpmhpd - - qcom,sm4250-rpmpd - qcom,sm6115-rpmpd - qcom,sm6125-rpmpd - qcom,sm6350-rpmhpd diff --git a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml index 2998f1c8f0db..08eb10c25821 100644 --- a/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml +++ b/Documentation/devicetree/bindings/reserved-memory/qcom,rmtfs-mem.yaml @@ -27,9 +27,11 @@ properties: identifier of the client to use this region for buffers qcom,vmid: - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32-array description: > - vmid of the remote processor, to set up memory protection + Array of vmids of the remote processors, to set up memory protection + minItems: 1 + maxItems: 2 required: - qcom,client-id diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml index 290555426c39..bdf482db32aa 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,apr-services.yaml @@ -39,8 +39,8 @@ properties: qcom,protection-domain: $ref: /schemas/types.yaml#/definitions/string-array description: | - Protection domain service name and path for APR service - possible values are:: + Protection domain service name and path for APR service (if supported). + Possible values are:: "avs/audio", "msm/adsp/audio_pd". "kernel/elf_loader", "msm/modem/wlan_pd". "tms/servreg", "msm/adsp/audio_pd". @@ -49,6 +49,5 @@ properties: required: - reg - - qcom,protection-domain additionalProperties: true diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml new file mode 100644 index 000000000000..ce7e20dd22c9 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,dcc.yaml @@ -0,0 +1,44 @@ +# SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,dcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Data Capture and Compare + +maintainers: + - Souradeep Chowdhury <quic_schowdhu@quicinc.com> + +description: | + DCC (Data Capture and Compare) is a DMA engine which is used to save + configuration data or system memory contents during catastrophic failure + or SW trigger. DCC is used to capture and store data for debugging purpose + +properties: + compatible: + items: + - enum: + - qcom,sm8150-dcc + - qcom,sc7280-dcc + - qcom,sc7180-dcc + - qcom,sdm845-dcc + - const: qcom,dcc + + reg: + items: + - description: DCC base + - description: DCC RAM base + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + dma@10a2000{ + compatible = "qcom,sm8150-dcc", "qcom,dcc"; + reg = <0x010a2000 0x1000>, + <0x010ad000 0x2000>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml new file mode 100644 index 000000000000..aae9cf7b8caf --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml @@ -0,0 +1,36 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,msm8976-ramp-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Ramp Controller + +maintainers: + - AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> + +description: + The Ramp Controller is used to program the sequence ID for pulse + swallowing, enable sequences and link Sequence IDs (SIDs) for the + CPU cores on some Qualcomm SoCs. + +properties: + compatible: + enum: + - qcom,msm8976-ramp-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + cpu-power-controller@b014000 { + compatible = "qcom,msm8976-ramp-controller"; + reg = <0x0b014000 0x68>; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml new file mode 100644 index 000000000000..b00be9e01206 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,rpm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/qcom/qcom,rpm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Resource Power Manager (RPM) + +description: + This driver is used to interface with the Resource Power Manager (RPM) found + in various Qualcomm platforms. The RPM allows each component in the system + to vote for state of the system resources, such as clocks, regulators and bus + frequencies. + +maintainers: + - Bjorn Andersson <andersson@kernel.org> + +properties: + compatible: + enum: + - qcom,rpm-apq8064 + - qcom,rpm-msm8660 + - qcom,rpm-msm8960 + - qcom,rpm-ipq8064 + - qcom,rpm-mdm9615 + + reg: + maxItems: 1 + + interrupts: + maxItems: 3 + + interrupt-names: + items: + - const: ack + - const: err + - const: wakeup + + qcom,ipc: + $ref: /schemas/types.yaml#/definitions/phandle-array + items: + - items: + - description: phandle to a syscon node representing the APCS registers + - description: u32 representing offset to the register within the syscon + - description: u32 representing the ipc bit within the register + description: + Three entries specifying the outgoing ipc bit used for signaling the RPM. + +patternProperties: + "^regulators(-[01])?$": + type: object + $ref: /schemas/regulator/qcom,rpm-regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-names + - qcom,ipc + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mfd/qcom-rpm.h> + + rpm@108000 { + compatible = "qcom,rpm-msm8960"; + reg = <0x108000 0x1000>; + qcom,ipc = <&apcs 0x8 2>; + + interrupts = <GIC_SPI 19 IRQ_TYPE_NONE>, <GIC_SPI 21 IRQ_TYPE_NONE>, <GIC_SPI 22 IRQ_TYPE_NONE>; + interrupt-names = "ack", "err", "wakeup"; + + regulators { + compatible = "qcom,rpm-pm8921-regulators"; + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; + + s1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + + bias-pull-down; + + qcom,switch-mode-frequency = <3200000>; + }; + + pm8921_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + qcom,switch-mode-frequency = <1600000>; + bias-pull-down; + + qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml index 11c0f4dd797c..16fd67c0bd1f 100644 --- a/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml +++ b/Documentation/devicetree/bindings/soc/qcom/qcom,smd-rpm.yaml @@ -80,6 +80,7 @@ if: enum: - qcom,rpm-apq8084 - qcom,rpm-msm8916 + - qcom,rpm-msm8936 - qcom,rpm-msm8974 - qcom,rpm-msm8976 - qcom,rpm-msm8953 |