diff options
Diffstat (limited to 'Documentation/devicetree')
8 files changed, 113 insertions, 15 deletions
diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt index afc04589eadf..27f2bc15298a 100644 --- a/Documentation/devicetree/bindings/eeprom/eeprom.txt +++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt @@ -36,6 +36,8 @@ Optional properties: - read-only: this parameterless property disables writes to the eeprom + - size: total eeprom size in bytes + Example: eeprom@52 { diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt index bd6480b19535..e7106bfc1f13 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt @@ -7,7 +7,9 @@ Required Properties: - compatible : should be "aspeed,ast2400-i2c-bus" or "aspeed,ast2500-i2c-bus" - clocks : root clock of bus, should reference the APB - clock + clock in the second cell +- resets : phandle to reset controller with the reset number in + the second cell - interrupts : interrupt number - interrupt-parent : interrupt controller for bus, should reference a aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic @@ -40,7 +42,8 @@ i2c { #interrupt-cells = <1>; reg = <0x40 0x40>; compatible = "aspeed,ast2400-i2c-bus"; - clocks = <&clk_apb>; + clocks = <&syscon ASPEED_CLK_APB>; + resets = <&syscon ASPEED_RESET_I2C>; bus-frequency = <100000>; interrupts = <0>; interrupt-parent = <&i2c_ic>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt index 5b123e0e4cc2..64e6e656c345 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-davinci.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-davinci.txt @@ -6,6 +6,18 @@ davinci/keystone i2c interface contains. Required properties: - compatible: "ti,davinci-i2c" or "ti,keystone-i2c"; - reg : Offset and length of the register set for the device +- clocks: I2C functional clock phandle. + For 66AK2G this property should be set per binding, + Documentation/devicetree/bindings/clock/ti,sci-clk.txt + +SoC-specific Required Properties: + +The following are mandatory properties for Keystone 2 66AK2G SoCs only: + +- power-domains: Should contain a phandle to a PM domain provider node + and an args specifier containing the I2C device id + value. This property is as per the binding, + Documentation/devicetree/bindings/soc/ti/sci-pm-domain.txt Recommended properties : - interrupts : standard interrupt property. diff --git a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt index 4f8ec947c6bd..38a05562d1d2 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-gpio.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-gpio.txt @@ -2,25 +2,39 @@ Device-Tree bindings for i2c gpio driver Required properties: - compatible = "i2c-gpio"; - - gpios: sda and scl gpio - + - sda-gpios: gpio used for the sda signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. + - scl-gpios: gpio used for the scl signal, this should be flagged as + active high using open drain with (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) + from <dt-bindings/gpio/gpio.h> since the signal is by definition + open drain. Optional properties: - - i2c-gpio,sda-open-drain: sda as open drain - - i2c-gpio,scl-open-drain: scl as open drain - i2c-gpio,scl-output-only: scl as output only - i2c-gpio,delay-us: delay between GPIO operations (may depend on each platform) - i2c-gpio,timeout-ms: timeout to get data +Deprecated properties, do not use in new device tree sources: + - gpios: sda and scl gpio, alternative for {sda,scl}-gpios + - i2c-gpio,sda-open-drain: this means that something outside of our + control has put the GPIO line used for SDA into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + - i2c-gpio,scl-open-drain: this means that something outside of our + control has put the GPIO line used for SCL into open drain mode, and + that something is not the GPIO chip. It is essentially an + inconsistency flag. + Example nodes: +#include <dt-bindings/gpio/gpio.h> + i2c@0 { compatible = "i2c-gpio"; - gpios = <&pioA 23 0 /* sda */ - &pioA 24 0 /* scl */ - >; - i2c-gpio,sda-open-drain; - i2c-gpio,scl-open-drain; + sda-gpios = <&pioA 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&pioA 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; i2c-gpio,delay-us = <2>; /* ~100 kHz */ #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.txt b/Documentation/devicetree/bindings/i2c/i2c-mux.txt index 212e6779dc5c..b38f58a1c878 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.txt @@ -6,10 +6,10 @@ multiplexer/switch will have one child node for each child bus. Optional properties: - #address-cells = <1>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - #size-cells = <0>; - This property is required is the i2c-mux child node does not exist. + This property is required if the i2c-mux child node does not exist. - i2c-mux For i2c multiplexers/switches that have child nodes that are a mixture diff --git a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt index cad39aee9f73..a777477e4547 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-rcar.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-rcar.txt @@ -13,6 +13,7 @@ Required properties: "renesas,i2c-r8a7794" if the device is a part of a R8A7794 SoC. "renesas,i2c-r8a7795" if the device is a part of a R8A7795 SoC. "renesas,i2c-r8a7796" if the device is a part of a R8A7796 SoC. + "renesas,i2c-r8a77970" if the device is a part of a R8A77970 SoC. "renesas,rcar-gen1-i2c" for a generic R-Car Gen1 compatible device. "renesas,rcar-gen2-i2c" for a generic R-Car Gen2 or RZ/G1 compatible device. diff --git a/Documentation/devicetree/bindings/i2c/i2c.txt b/Documentation/devicetree/bindings/i2c/i2c.txt index cee9d5055fa2..11263982470e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c.txt +++ b/Documentation/devicetree/bindings/i2c/i2c.txt @@ -59,8 +59,8 @@ wants to support one of the below features, it should adapt the bindings below. interrupts used by the device. - interrupt-names - "irq" and "wakeup" names are recognized by I2C core, other names are - left to individual drivers. + "irq", "wakeup" and "smbus_alert" names are recognized by I2C core, + other names are left to individual drivers. - host-notify device uses SMBus host notify protocol instead of interrupt line. diff --git a/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt new file mode 100644 index 000000000000..4b2195571a49 --- /dev/null +++ b/Documentation/devicetree/bindings/power/supply/sbs,sbs-manager.txt @@ -0,0 +1,66 @@ +Binding for sbs-manager + +Required properties: +- compatible: "<vendor>,<part-number>", "sbs,sbs-charger" as fallback. The part + number compatible string might be used in order to take care of vendor + specific registers. +- reg: integer, i2c address of the device. Should be <0xa>. +Optional properties: +- gpio-controller: Marks the port as GPIO controller. + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. +- #gpio-cells: Should be <2>. The first cell is the pin number, the second cell + is used to specify optional parameters: + See "gpio-specifier" in .../devicetree/bindings/gpio/gpio.txt. + +From OS view the device is basically an i2c-mux used to communicate with up to +four smart battery devices at address 0xb. The driver actually implements this +behaviour. So standard i2c-mux nodes can be used to register up to four slave +batteries. Channels will be numerated starting from 1 to 4. + +Example: + +batman@a { + compatible = "lltc,ltc1760", "sbs,sbs-manager"; + reg = <0x0a>; + #address-cells = <1>; + #size-cells = <0>; + + gpio-controller; + #gpio-cells = <2>; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 1 1>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 2 1>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + battery@b { + compatible = "ti,bq2060", "sbs,sbs-battery"; + reg = <0x0b>; + sbs,battery-detect-gpios = <&batman 3 1>; + }; + }; +}; |