diff options
Diffstat (limited to 'Documentation/devicetree')
14 files changed, 1386 insertions, 291 deletions
diff --git a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml index 308af58180d1..4d823f3b1f0e 100644 --- a/Documentation/devicetree/bindings/firmware/arm,scmi.yaml +++ b/Documentation/devicetree/bindings/firmware/arm,scmi.yaml @@ -255,7 +255,9 @@ properties: type: object allOf: - $ref: '#/$defs/protocol-node' - - $ref: /schemas/pinctrl/pinctrl.yaml + - anyOf: + - $ref: /schemas/pinctrl/pinctrl.yaml + - $ref: /schemas/firmware/nxp,imx95-scmi-pinctrl.yaml unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml new file mode 100644 index 000000000000..a96fc6cce502 --- /dev/null +++ b/Documentation/devicetree/bindings/firmware/nxp,imx95-scmi-pinctrl.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2024 NXP +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/firmware/nxp,imx95-scmi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: i.MX System Control and Management Interface (SCMI) Pinctrl Protocol + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +allOf: + - $ref: /schemas/pinctrl/pinctrl.yaml + +patternProperties: + 'grp$': + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + + unevaluatedProperties: false + + properties: + fsl,pins: + description: + each entry consists of 6 integers and represents the mux and config + setting for one pin. The first 5 integers <mux_reg conf_reg input_reg + mux_val input_val> are specified using a PIN_FUNC_ID macro, which can + be found in <arch/arm64/boot/dts/freescale/imx95-pinfunc.h>. The last + integer CONFIG is the pad setting value like pull-up on this pin. + Please refer to i.MX95 Reference Manual for detailed CONFIG settings. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + items: + items: + - description: | + "mux_reg" indicates the offset of mux register. + - description: | + "conf_reg" indicates the offset of pad configuration register. + - description: | + "input_reg" indicates the offset of select input register. + - description: | + "mux_val" indicates the mux value to be applied. + - description: | + "input_val" indicates the select input value to be applied. + - description: | + "pad_setting" indicates the pad configuration value to be applied. + + required: + - fsl,pins + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml index 37c0a74c7c01..23ed9a8b6689 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml @@ -35,22 +35,159 @@ additionalProperties: patternProperties: "^function|groups$": - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - EXTRST, FLACK, FLBUSY, FLWP, GPID, GPID0, GPID2, GPID4, GPID6, GPIE0, - GPIE2, GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, - I2C5, I2C6, I2C7, I2C8, I2C9, LPCPD, LPCPME, LPCRST, LPCSMI, MAC1LINK, - MAC2LINK, MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, - NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, - NDTS4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, OSCCLK, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, ROM16, ROM8, ROMCS1, ROMCS2, ROMCS3, ROMCS4, RXD1, RXD2, RXD3, - RXD4, SALT1, SALT2, SALT3, SALT4, SD1, SD2, SGPMCK, SGPMI, SGPMLD, - SGPMO, SGPSCK, SGPSI0, SGPSI1, SGPSLD, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1DEBUG, SPI1PASSTHRU, - SPICS1, TIMER3, TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, - TXD3, TXD4, UART6, USB11D1, USB11H2, USB2D1, USB2H1, USBCKI, VGABIOS_ROM, - VGAHS, VGAVS, VPI18, VPI24, VPI30, VPO12, VPO24, WDTRST1, WDTRST2] + enum: + - ACPI + - ADC0 + - ADC1 + - ADC10 + - ADC11 + - ADC12 + - ADC13 + - ADC14 + - ADC15 + - ADC2 + - ADC3 + - ADC4 + - ADC5 + - ADC6 + - ADC7 + - ADC8 + - ADC9 + - BMCINT + - DDCCLK + - DDCDAT + - EXTRST + - FLACK + - FLBUSY + - FLWP + - GPID + - GPID0 + - GPID2 + - GPID4 + - GPID6 + - GPIE0 + - GPIE2 + - GPIE4 + - GPIE6 + - I2C10 + - I2C11 + - I2C12 + - I2C13 + - I2C14 + - I2C3 + - I2C4 + - I2C5 + - I2C6 + - I2C7 + - I2C8 + - I2C9 + - LPCPD + - LPCPME + - LPCRST + - LPCSMI + - MAC1LINK + - MAC2LINK + - MDIO1 + - MDIO2 + - NCTS1 + - NCTS2 + - NCTS3 + - NCTS4 + - NDCD1 + - NDCD2 + - NDCD3 + - NDCD4 + - NDSR1 + - NDSR2 + - NDSR3 + - NDSR4 + - NDTR1 + - NDTR2 + - NDTR3 + - NDTR4 + - NDTS4 + - NRI1 + - NRI2 + - NRI3 + - NRI4 + - NRTS1 + - NRTS2 + - NRTS3 + - OSCCLK + - PWM0 + - PWM1 + - PWM2 + - PWM3 + - PWM4 + - PWM5 + - PWM6 + - PWM7 + - RGMII1 + - RGMII2 + - RMII1 + - RMII2 + - ROM16 + - ROM8 + - ROMCS1 + - ROMCS2 + - ROMCS3 + - ROMCS4 + - RXD1 + - RXD2 + - RXD3 + - RXD4 + - SALT1 + - SALT2 + - SALT3 + - SALT4 + - SD1 + - SD2 + - SGPMCK + - SGPMI + - SGPMLD + - SGPMO + - SGPSCK + - SGPSI0 + - SGPSI1 + - SGPSLD + - SIOONCTRL + - SIOPBI + - SIOPBO + - SIOPWREQ + - SIOPWRGD + - SIOS3 + - SIOS5 + - SIOSCI + - SPI1 + - SPI1DEBUG + - SPI1PASSTHRU + - SPICS1 + - TIMER3 + - TIMER4 + - TIMER5 + - TIMER6 + - TIMER7 + - TIMER8 + - TXD1 + - TXD2 + - TXD3 + - TXD4 + - UART6 + - USB11D1 + - USB11H2 + - USB2D1 + - USB2H1 + - USBCKI + - VGABIOS_ROM + - VGAHS + - VGAVS + - VPI18 + - VPI24 + - VPI30 + - VPO12 + - VPO24 + - WDTRST1 + - WDTRST2 allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml index 863da5d80826..35bd0e1eadae 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml @@ -35,7 +35,7 @@ properties: description: | A cell of phandles to external controller nodes: 0: compatible with "aspeed,ast2500-gfx", "syscon" - 1: compatible with "aspeed,ast2500-lhc", "syscon" + 1: compatible with "aspeed,ast2500-lpc", "syscon" additionalProperties: $ref: pinmux-node.yaml# @@ -47,24 +47,174 @@ additionalProperties: patternProperties: "^function|groups$": - enum: [ ACPI, ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, - ADC2, ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, DDCCLK, DDCDAT, - ESPI, FWSPICS1, FWSPICS2, GPID0, GPID2, GPID4, GPID6, GPIE0, GPIE2, - GPIE4, GPIE6, I2C10, I2C11, I2C12, I2C13, I2C14, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, LAD0, LAD1, LAD2, LAD3, LCLK, LFRAME, LPCHC, - LPCPD, LPCPLUS, LPCPME, LPCRST, LPCSMI, LSIRQ, MAC1LINK, MAC2LINK, - MDIO1, MDIO2, NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, - NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, - NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PNOR, PWM0, - PWM1, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, RGMII1, RGMII2, RMII1, - RMII2, RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, - SALT14, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, SALT9, SCL1, - SCL2, SD1, SD2, SDA1, SDA2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1CS1, SPI1DEBUG, - SPI1PASSTHRU, SPI2CK, SPI2CS0, SPI2CS1, SPI2MISO, SPI2MOSI, TIMER3, - TIMER4, TIMER5, TIMER6, TIMER7, TIMER8, TXD1, TXD2, TXD3, TXD4, UART6, - USB11BHID, USB2AD, USB2AH, USB2BD, USB2BH, USBCKI, VGABIOSROM, VGAHS, - VGAVS, VPI24, VPO, WDTRST1, WDTRST2] + enum: + - ACPI + - ADC0 + - ADC1 + - ADC10 + - ADC11 + - ADC12 + - ADC13 + - ADC14 + - ADC15 + - ADC2 + - ADC3 + - ADC4 + - ADC5 + - ADC6 + - ADC7 + - ADC8 + - ADC9 + - BMCINT + - DDCCLK + - DDCDAT + - ESPI + - FWSPICS1 + - FWSPICS2 + - GPID0 + - GPID2 + - GPID4 + - GPID6 + - GPIE0 + - GPIE2 + - GPIE4 + - GPIE6 + - I2C10 + - I2C11 + - I2C12 + - I2C13 + - I2C14 + - I2C3 + - I2C4 + - I2C5 + - I2C6 + - I2C7 + - I2C8 + - I2C9 + - LAD0 + - LAD1 + - LAD2 + - LAD3 + - LCLK + - LFRAME + - LPCHC + - LPCPD + - LPCPLUS + - LPCPME + - LPCRST + - LPCSMI + - LSIRQ + - MAC1LINK + - MAC2LINK + - MDIO1 + - MDIO2 + - NCTS1 + - NCTS2 + - NCTS3 + - NCTS4 + - NDCD1 + - NDCD2 + - NDCD3 + - NDCD4 + - NDSR1 + - NDSR2 + - NDSR3 + - NDSR4 + - NDTR1 + - NDTR2 + - NDTR3 + - NDTR4 + - NRI1 + - NRI2 + - NRI3 + - NRI4 + - NRTS1 + - NRTS2 + - NRTS3 + - NRTS4 + - OSCCLK + - PEWAKE + - PNOR + - PWM0 + - PWM1 + - PWM2 + - PWM3 + - PWM4 + - PWM5 + - PWM6 + - PWM7 + - RGMII1 + - RGMII2 + - RMII1 + - RMII2 + - RXD1 + - RXD2 + - RXD3 + - RXD4 + - SALT1 + - SALT10 + - SALT11 + - SALT12 + - SALT13 + - SALT14 + - SALT2 + - SALT3 + - SALT4 + - SALT5 + - SALT6 + - SALT7 + - SALT8 + - SALT9 + - SCL1 + - SCL2 + - SD1 + - SD2 + - SDA1 + - SDA2 + - SGPM + - SGPS1 + - SGPS2 + - SIOONCTRL + - SIOPBI + - SIOPBO + - SIOPWREQ + - SIOPWRGD + - SIOS3 + - SIOS5 + - SIOSCI + - SPI1 + - SPI1CS1 + - SPI1DEBUG + - SPI1PASSTHRU + - SPI2CK + - SPI2CS0 + - SPI2CS1 + - SPI2MISO + - SPI2MOSI + - TIMER3 + - TIMER4 + - TIMER5 + - TIMER6 + - TIMER7 + - TIMER8 + - TXD1 + - TXD2 + - TXD3 + - TXD4 + - UART6 + - USB11BHID + - USB2AD + - USB2AH + - USB2BD + - USB2BH + - USBCKI + - VGABIOSROM + - VGAHS + - VGAVS + - VPI24 + - VPO + - WDTRST1 + - WDTRST2 allOf: - $ref: pinctrl.yaml# diff --git a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml index 612464aef98b..80974c46f3ef 100644 --- a/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml @@ -19,6 +19,11 @@ description: |+ Refer to the bindings described in Documentation/devicetree/bindings/mfd/syscon.yaml + Note: According to the NCSI specification, the reference clock output pin + (RMIIXRCLKO) is not required on the management controller side. To optimize + pin usage, add "NCSI" pin groups that are equivalent to the RMII pin groups, + but without the RMIIXRCLKO pin. + properties: compatible: const: aspeed,ast2600-pinctrl @@ -29,56 +34,469 @@ additionalProperties: properties: function: - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMC, ESPI, ESPIALT, - FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, GPIT0, GPIT1, GPIT2, GPIT3, - GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, GPIU2, GPIU3, GPIU4, GPIU5, - GPIU6, GPIU7, I2C1, I2C10, I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, - I2C2, I2C3, I2C4, I2C5, I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, - I3C6, JTAGM, LHPD, LHSIRQ, LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, - MACLINK1, MACLINK2, MACLINK3, MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, - NCTS1, NCTS2, NCTS3, NCTS4, NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, - NDSR3, NDSR4, NDTR1, NDTR2, NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, - NRTS1, NRTS2, NRTS3, NRTS4, OSCCLK, PEWAKE, PWM0, PWM1, PWM10, PWM11, - PWM12, PWM13, PWM14, PWM15, PWM2, PWM3, PWM4, PWM5, PWM6, PWM7, PWM8, - PWM9, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10, SALT11, SALT12, SALT13, SALT14, - SALT15, SALT16, SALT2, SALT3, SALT4, SALT5, SALT6, SALT7, SALT8, - SALT9, SD1, SD2, SGPM1, SGPM2, SGPS1, SGPS2, SIOONCTRL, SIOPBI, SIOPBO, - SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, SPI1ABR, SPI1CS1, SPI1WP, SPI2, - SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, TACH12, TACH13, TACH14, - TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, TACH7, TACH8, TACH9, THRU0, - THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, TXD4, UART10, UART11, UART12, - UART13, UART6, UART7, UART8, UART9, USBAD, USBADP, USB2AH, USB2AHP, - USB2BD, USB2BH, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, WDTRST3, WDTRST4 ] + enum: + - ADC0 + - ADC1 + - ADC10 + - ADC11 + - ADC12 + - ADC13 + - ADC14 + - ADC15 + - ADC2 + - ADC3 + - ADC4 + - ADC5 + - ADC6 + - ADC7 + - ADC8 + - ADC9 + - BMCINT + - EMMC + - ESPI + - ESPIALT + - FSI1 + - FSI2 + - FWQSPI + - FWSPIABR + - FWSPID + - FWSPIWP + - GPIT0 + - GPIT1 + - GPIT2 + - GPIT3 + - GPIT4 + - GPIT5 + - GPIT6 + - GPIT7 + - GPIU0 + - GPIU1 + - GPIU2 + - GPIU3 + - GPIU4 + - GPIU5 + - GPIU6 + - GPIU7 + - I2C1 + - I2C10 + - I2C11 + - I2C12 + - I2C13 + - I2C14 + - I2C15 + - I2C16 + - I2C2 + - I2C3 + - I2C4 + - I2C5 + - I2C6 + - I2C7 + - I2C8 + - I2C9 + - I3C1 + - I3C2 + - I3C3 + - I3C4 + - I3C5 + - I3C6 + - JTAGM + - LHPD + - LHSIRQ + - LPC + - LPCHC + - LPCPD + - LPCPME + - LPCSMI + - LSIRQ + - MACLINK1 + - MACLINK2 + - MACLINK3 + - MACLINK4 + - MDIO1 + - MDIO2 + - MDIO3 + - MDIO4 + - NCTS1 + - NCTS2 + - NCTS3 + - NCTS4 + - NDCD1 + - NDCD2 + - NDCD3 + - NDCD4 + - NDSR1 + - NDSR2 + - NDSR3 + - NDSR4 + - NDTR1 + - NDTR2 + - NDTR3 + - NDTR4 + - NRI1 + - NRI2 + - NRI3 + - NRI4 + - NRTS1 + - NRTS2 + - NRTS3 + - NRTS4 + - OSCCLK + - PEWAKE + - PWM0 + - PWM1 + - PWM10 + - PWM11 + - PWM12 + - PWM13 + - PWM14 + - PWM15 + - PWM2 + - PWM3 + - PWM4 + - PWM5 + - PWM6 + - PWM7 + - PWM8 + - PWM9 + - RGMII1 + - RGMII2 + - RGMII3 + - RGMII4 + - RMII1 + - RMII2 + - RMII3 + - RMII4 + - RXD1 + - RXD2 + - RXD3 + - RXD4 + - SALT1 + - SALT10 + - SALT11 + - SALT12 + - SALT13 + - SALT14 + - SALT15 + - SALT16 + - SALT2 + - SALT3 + - SALT4 + - SALT5 + - SALT6 + - SALT7 + - SALT8 + - SALT9 + - SD1 + - SD2 + - SGPM1 + - SGPM2 + - SGPS1 + - SGPS2 + - SIOONCTRL + - SIOPBI + - SIOPBO + - SIOPWREQ + - SIOPWRGD + - SIOS3 + - SIOS5 + - SIOSCI + - SPI1 + - SPI1ABR + - SPI1CS1 + - SPI1WP + - SPI2 + - SPI2CS1 + - SPI2CS2 + - TACH0 + - TACH1 + - TACH10 + - TACH11 + - TACH12 + - TACH13 + - TACH14 + - TACH15 + - TACH2 + - TACH3 + - TACH4 + - TACH5 + - TACH6 + - TACH7 + - TACH8 + - TACH9 + - THRU0 + - THRU1 + - THRU2 + - THRU3 + - TXD1 + - TXD2 + - TXD3 + - TXD4 + - UART10 + - UART11 + - UART12 + - UART13 + - UART6 + - UART7 + - UART8 + - UART9 + - USB11BHID + - USB2AD + - USB2AH + - USB2AHP + - USB2BD + - USB2BH + - USBAD + - USBADP + - VB + - VGAHS + - VGAVS + - WDTRST1 + - WDTRST2 + - WDTRST3 + - WDTRST4 groups: - enum: [ ADC0, ADC1, ADC10, ADC11, ADC12, ADC13, ADC14, ADC15, ADC2, - ADC3, ADC4, ADC5, ADC6, ADC7, ADC8, ADC9, BMCINT, EMMCG1, EMMCG4, - EMMCG8, ESPI, ESPIALT, FSI1, FSI2, FWQSPI, FWSPIABR, FWSPID, FWSPIWP, - GPIT0, GPIT1, GPIT2, GPIT3, GPIT4, GPIT5, GPIT6, GPIT7, GPIU0, GPIU1, - GPIU2, GPIU3, GPIU4, GPIU5, GPIU6, GPIU7, HVI3C3, HVI3C4, I2C1, I2C10, - I2C11, I2C12, I2C13, I2C14, I2C15, I2C16, I2C2, I2C3, I2C4, I2C5, - I2C6, I2C7, I2C8, I2C9, I3C3, I3C4, I3C5, I3C6, JTAGM, LHPD, LHSIRQ, - LPC, LPCHC, LPCPD, LPCPME, LPCSMI, LSIRQ, MACLINK1, MACLINK2, MACLINK3, - MACLINK4, MDIO1, MDIO2, MDIO3, MDIO4, NCTS1, NCTS2, NCTS3, NCTS4, - NDCD1, NDCD2, NDCD3, NDCD4, NDSR1, NDSR2, NDSR3, NDSR4, NDTR1, NDTR2, - NDTR3, NDTR4, NRI1, NRI2, NRI3, NRI4, NRTS1, NRTS2, NRTS3, NRTS4, - OSCCLK, PEWAKE, PWM0, PWM1, PWM10G0, PWM10G1, PWM11G0, PWM11G1, PWM12G0, - PWM12G1, PWM13G0, PWM13G1, PWM14G0, PWM14G1, PWM15G0, PWM15G1, PWM2, - PWM3, PWM4, PWM5, PWM6, PWM7, PWM8G0, PWM8G1, PWM9G0, PWM9G1, QSPI1, - QSPI2, RGMII1, RGMII2, RGMII3, RGMII4, RMII1, RMII2, RMII3, RMII4, - RXD1, RXD2, RXD3, RXD4, SALT1, SALT10G0, SALT10G1, SALT11G0, SALT11G1, - SALT12G0, SALT12G1, SALT13G0, SALT13G1, SALT14G0, SALT14G1, SALT15G0, - SALT15G1, SALT16G0, SALT16G1, SALT2, SALT3, SALT4, SALT5, SALT6, - SALT7, SALT8, SALT9G0, SALT9G1, SD1, SD2, SD3, SGPM1, SGPM2, SGPS1, SGPS2, - SIOONCTRL, SIOPBI, SIOPBO, SIOPWREQ, SIOPWRGD, SIOS3, SIOS5, SIOSCI, SPI1, - SPI1ABR, SPI1CS1, SPI1WP, SPI2, SPI2CS1, SPI2CS2, TACH0, TACH1, TACH10, TACH11, - TACH12, TACH13, TACH14, TACH15, TACH2, TACH3, TACH4, TACH5, TACH6, - TACH7, TACH8, TACH9, THRU0, THRU1, THRU2, THRU3, TXD1, TXD2, TXD3, - TXD4, UART10, UART11, UART12G0, UART12G1, UART13G0, UART13G1, UART6, - UART7, UART8, UART9, USBA, USBB, VB, VGAHS, VGAVS, WDTRST1, WDTRST2, - WDTRST3, WDTRST4] + enum: + - ADC0 + - ADC1 + - ADC10 + - ADC11 + - ADC12 + - ADC13 + - ADC14 + - ADC15 + - ADC2 + - ADC3 + - ADC4 + - ADC5 + - ADC6 + - ADC7 + - ADC8 + - ADC9 + - BMCINT + - EMMCG1 + - EMMCG4 + - EMMCG8 + - ESPI + - ESPIALT + - FSI1 + - FSI2 + - FWQSPI + - FWSPIABR + - FWSPID + - FWSPIWP + - GPIT0 + - GPIT1 + - GPIT2 + - GPIT3 + - GPIT4 + - GPIT5 + - GPIT6 + - GPIT7 + - GPIU0 + - GPIU1 + - GPIU2 + - GPIU3 + - GPIU4 + - GPIU5 + - GPIU6 + - GPIU7 + - HVI3C3 + - HVI3C4 + - I2C1 + - I2C10 + - I2C11 + - I2C12 + - I2C13 + - I2C14 + - I2C15 + - I2C16 + - I2C2 + - I2C3 + - I2C4 + - I2C5 + - I2C6 + - I2C7 + - I2C8 + - I2C9 + - I3C1 + - I3C2 + - I3C3 + - I3C4 + - I3C5 + - I3C6 + - JTAGM + - LHPD + - LHSIRQ + - LPC + - LPCHC + - LPCPD + - LPCPME + - LPCSMI + - LSIRQ + - MACLINK1 + - MACLINK2 + - MACLINK3 + - MACLINK4 + - MDIO1 + - MDIO2 + - MDIO3 + - MDIO4 + - NCSI3 + - NCSI4 + - NCTS1 + - NCTS2 + - NCTS3 + - NCTS4 + - NDCD1 + - NDCD2 + - NDCD3 + - NDCD4 + - NDSR1 + - NDSR2 + - NDSR3 + - NDSR4 + - NDTR1 + - NDTR2 + - NDTR3 + - NDTR4 + - NRI1 + - NRI2 + - NRI3 + - NRI4 + - NRTS1 + - NRTS2 + - NRTS3 + - NRTS4 + - OSCCLK + - PEWAKE + - PWM0 + - PWM1 + - PWM10G0 + - PWM10G1 + - PWM11G0 + - PWM11G1 + - PWM12G0 + - PWM12G1 + - PWM13G0 + - PWM13G1 + - PWM14G0 + - PWM14G1 + - PWM15G0 + - PWM15G1 + - PWM2 + - PWM3 + - PWM4 + - PWM5 + - PWM6 + - PWM7 + - PWM8G0 + - PWM8G1 + - PWM9G0 + - PWM9G1 + - QSPI1 + - QSPI2 + - RGMII1 + - RGMII2 + - RGMII3 + - RGMII4 + - RMII1 + - RMII2 + - RMII3 + - RMII4 + - RXD1 + - RXD2 + - RXD3 + - RXD4 + - SALT1 + - SALT10G0 + - SALT10G1 + - SALT11G0 + - SALT11G1 + - SALT12G0 + - SALT12G1 + - SALT13G0 + - SALT13G1 + - SALT14G0 + - SALT14G1 + - SALT15G0 + - SALT15G1 + - SALT16G0 + - SALT16G1 + - SALT2 + - SALT3 + - SALT4 + - SALT5 + - SALT6 + - SALT7 + - SALT8 + - SALT9G0 + - SALT9G1 + - SD1 + - SD2 + - SD3 + - SGPM1 + - SGPM2 + - SGPS1 + - SGPS2 + - SIOONCTRL + - SIOPBI + - SIOPBO + - SIOPWREQ + - SIOPWRGD + - SIOS3 + - SIOS5 + - SIOSCI + - SPI1 + - SPI1ABR + - SPI1CS1 + - SPI1WP + - SPI2 + - SPI2CS1 + - SPI2CS2 + - TACH0 + - TACH1 + - TACH10 + - TACH11 + - TACH12 + - TACH13 + - TACH14 + - TACH15 + - TACH2 + - TACH3 + - TACH4 + - TACH5 + - TACH6 + - TACH7 + - TACH8 + - TACH9 + - THRU0 + - THRU1 + - THRU2 + - THRU3 + - TXD1 + - TXD2 + - TXD3 + - TXD4 + - UART10 + - UART11 + - UART12G0 + - UART12G1 + - UART13G0 + - UART13G1 + - UART6 + - UART7 + - UART8 + - UART9 + - USBA + - USBB + - VB + - VGAHS + - VGAVS + - WDTRST1 + - WDTRST2 + - WDTRST3 + - WDTRST4 pins: true bias-disable: true diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml index 2f2405102996..a438db8884f2 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx93-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx9-pinctrl.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause %YAML 1.2 --- -$id: http://devicetree.org/schemas/pinctrl/fsl,imx93-pinctrl.yaml# +$id: http://devicetree.org/schemas/pinctrl/fsl,imx9-pinctrl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale IMX93 IOMUX Controller +title: Freescale IMX9 IOMUX Controller maintainers: - Peng Fan <peng.fan@nxp.com> @@ -18,7 +18,9 @@ allOf: properties: compatible: - const: fsl,imx93-iomuxc + enum: + - fsl,imx91-iomuxc + - fsl,imx93-iomuxc reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml new file mode 100644 index 000000000000..763a49bd07dc --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/nuvoton,ma35d1-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Nuvoton MA35D1 pin control and GPIO + +maintainers: + - Shan-Chun Hung <schung@nuvoton.com> + - Jacky Huang <ychuang3@nuvoton.com> + +allOf: + - $ref: pinctrl.yaml# + +properties: + compatible: + enum: + - nuvoton,ma35d1-pinctrl + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + nuvoton,sys: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle of the system-management node. + + ranges: true + +patternProperties: + "^gpio@[0-9a-f]+$": + type: object + properties: + gpio-controller: true + + '#gpio-cells': + const: 2 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: + The interrupt outputs to sysirq. + maxItems: 1 + + required: + - gpio-controller + - '#gpio-cells' + - reg + - clocks + - interrupt-controller + - '#interrupt-cells' + - interrupts + + additionalProperties: false + + "-grp$": + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + patternProperties: + "-pins$": + type: object + description: + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and input + schmitt. + $ref: /schemas/pinctrl/pincfg-node.yaml + + properties: + nuvoton,pins: + description: + Each entry consists of 4 parameters and represents the mux and config + setting for one pin. + $ref: /schemas/types.yaml#/definitions/uint32-matrix + minItems: 1 + items: + items: + - minimum: 0 + maximum: 13 + description: + Pin bank. + - minimum: 0 + maximum: 15 + description: + Pin bank index. + - minimum: 0 + maximum: 15 + description: + Mux 0 means GPIO and mux 1 to 15 means the specific device function. + + power-source: + description: | + Valid arguments are described as below: + 0: power supply of 1.8V + 1: power supply of 3.3V + enum: [0, 1] + + drive-strength-microamp: + oneOf: + - enum: [ 2900, 4400, 5800, 7300, 8600, 10100, 11500, 13000 ] + description: 1.8V I/O driving strength + - enum: [ 17100, 25600, 34100, 42800, 48000, 56000, 77000, 82000 ] + description: 3.3V I/O driving strength + + bias-disable: true + + bias-pull-up: true + + bias-pull-down: true + + input-schmitt-disable: true + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - nuvoton,sys + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/clock/nuvoton,ma35d1-clk.h> + + pinctrl@40040000 { + compatible = "nuvoton,ma35d1-pinctrl"; + reg = <0x40040000 0xc00>; + #address-cells = <1>; + #size-cells = <1>; + nuvoton,sys = <&sys>; + ranges = <0x0 0x40040000 0x400>; + + gpio@0 { + reg = <0x0 0x40>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk GPA_GATE>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart-grp { + uart11-pins { + nuvoton,pins = <11 0 2>, + <11 1 2>, + <11 2 2>, + <11 3 2>; + power-source = <1>; + bias-disable; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml index b55d9c316659..814b9598edd1 100644 --- a/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,npcm845-pinctrl.yaml @@ -85,11 +85,12 @@ patternProperties: smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk, - scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1, - spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den, - smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix, - spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4, - hgpio5, hgpio6, hgpio7 ] + scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c, + smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2, + spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio, + wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0, + hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4, + bu4b, bu5, bu5b, bu6, gpo187 ] function: description: @@ -109,11 +110,12 @@ patternProperties: smb2c, smb2b, smb1c, smb1b, smb8, smb9, smb10, smb11, sd1, sd1pwr, pwm4, pwm5, pwm6, pwm7, pwm8, pwm9, pwm10, pwm11, mmc8, mmc, mmcwp, mmccd, mmcrst, clkout, serirq, lpcclk, - scipme, smi, smb6, smb7, spi1, faninx, r1, spi3, spi3cs1, - spi3quad, spi3cs2, spi3cs3, nprd_smi, smb0b, smb0c, smb0den, - smb0d, ddc, rg2mdio, wdog1, wdog2, smb12, smb13, spix, - spixcs1, clkreq, hgpio0, hgpio1, hgpio2, hgpio3, hgpio4, - hgpio5, hgpio6, hgpio7 ] + scipme, smi, smb6, smb6b, smb6c, smb6d, smb7, smb7b, smb7c, + smb7d, spi1, faninx, r1, spi3, spi3cs1, spi3quad, spi3cs2, + spi3cs3, nprd_smi, smb0b, smb0c, smb0den, smb0d, ddc, rg2mdio, + wdog1, wdog2, smb12, smb13, spix, spixcs1, clkreq, hgpio0, + hgpio1, hgpio2, hgpio3, hgpio4, hgpio5, hgpio6, hgpio7, bu4, + bu4b, bu5, bu5b, bu6, gpo187 ] dependencies: groups: [ function ] diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml index c11495524dd2..e02595316c9f 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.yaml @@ -75,11 +75,11 @@ properties: description: Optional list of pin base, nr pins & gpio function $ref: /schemas/types.yaml#/definitions/phandle-array items: - - items: - - description: phandle of a gpio-range node - - description: pin base - - description: number of pins - - description: gpio function + items: + - description: phandle of a gpio-range node + - description: pin base + - description: number of pins + - description: gpio function '#gpio-range-cells': description: No longer needed, may exist in older files for gpio-ranges @@ -144,6 +144,13 @@ patternProperties: - description: drive strength mask pinctrl-single,input-schmitt: + description: Optional schmitt strength configuration + $ref: /schemas/types.yaml#/definitions/uint32-array + items: + - description: schmitt strength current + - description: schmitt strength mask + + pinctrl-single,input-schmitt-enable: description: Optional input schmitt configuration $ref: /schemas/types.yaml#/definitions/uint32-array items: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml index 0bf2d9f093b5..2784d32fdde2 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml @@ -56,6 +56,7 @@ properties: - qcom,pma8084-gpio - qcom,pmc8180-gpio - qcom,pmc8180c-gpio + - qcom,pmc8380-gpio - qcom,pmd8028-gpio - qcom,pmi632-gpio - qcom,pmi8950-gpio @@ -223,6 +224,7 @@ allOf: - qcom,pm8150-gpio - qcom,pm8350-gpio - qcom,pmc8180-gpio + - qcom,pmc8380-gpio - qcom,pmi8994-gpio - qcom,pmm8155au-gpio then: diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml new file mode 100644 index 000000000000..9612e21183fa --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml @@ -0,0 +1,118 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,sm4250-lpass-lpi-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM4250 SoC LPASS LPI TLMM + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: + Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem + (LPASS) Low Power Island (LPI) of Qualcomm SM4250 SoC. + +properties: + compatible: + const: qcom,sm4250-lpass-lpi-pinctrl + + reg: + items: + - description: LPASS LPI TLMM Control and Status registers + - description: LPASS LPI MCC registers + + clocks: + items: + - description: LPASS Audio voting clock + + clock-names: + items: + - const: audio + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-sm4250-lpass-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-sm4250-lpass-state" + additionalProperties: false + +$defs: + qcom-sm4250-lpass-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + pattern: "^gpio([0-9]|1[0-9]|2[0-6])$" + + function: + enum: [ gpio, dmic01_clk, dmic01_data, dmic23_clk, dmic23_data, + dmic4_clk, dmic4_data, ext_mclk0_a, ext_mclk0_b, ext_mclk1_a, + ext_mclk1_b, ext_mclk1_c, i2s1_clk, i2s1_data, i2s1_ws, + i2s2_clk, i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, + qua_mi2s_data, qua_mi2s_sclk, qua_mi2s_ws, slim_clk, slim_data, + swr_rx_clk, swr_rx_data, swr_tx_clk, swr_tx_data, swr_wsa_clk, + swr_wsa_data ] + description: + Specify the alternative function to be configured for the specified + pins. + +allOf: + - $ref: qcom,lpass-lpi-common.yaml# + +required: + - compatible + - reg + - clocks + - clock-names + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/sound/qcom,q6afe.h> + lpi_tlmm: pinctrl@a7c0000 { + compatible = "qcom,sm4250-lpass-lpi-pinctrl"; + reg = <0xa7c0000 0x20000>, + <0xa950000 0x10000>; + clocks = <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>; + clock-names = "audio"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&lpi_tlmm 0 0 19>; + + i2s2-active-state { + clk-pins { + pins = "gpio10"; + function = "i2s2_clk"; + drive-strength = <2>; + slew-rate = <1>; + bias-disable; + }; + + data-pins { + pins = "gpio12"; + function = "i2s2_data"; + drive-strength = <2>; + slew-rate = <1>; + }; + }; + + i2s2-sleep-clk-state { + pins = "gpio10"; + function = "i2s2_clk"; + drive-strength = <2>; + bias-pull-down; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml index 4d5a957fa232..56d90c8e1fa3 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/renesas,rzg2l-pinctrl.yaml @@ -26,6 +26,7 @@ properties: - renesas,r9a07g043-pinctrl # RZ/G2UL{Type-1,Type-2} and RZ/Five - renesas,r9a07g044-pinctrl # RZ/G2{L,LC} - renesas,r9a08g045-pinctrl # RZ/G3S + - renesas,r9a09g057-pinctrl # RZ/V2H(P) - items: - enum: @@ -66,10 +67,14 @@ properties: maxItems: 1 resets: - items: - - description: GPIO_RSTN signal - - description: GPIO_PORT_RESETN signal - - description: GPIO_SPARE_RESETN signal + oneOf: + - items: + - description: GPIO_RSTN signal + - description: GPIO_PORT_RESETN signal + - description: GPIO_SPARE_RESETN signal + - items: + - description: PFC main reset + - description: Reset for the control register related to WDTUDFCA and WDTUDFFCM pins additionalProperties: anyOf: @@ -79,21 +84,6 @@ additionalProperties: - $ref: pincfg-node.yaml# - $ref: pinmux-node.yaml# - - if: - properties: - compatible: - contains: - enum: - - renesas,r9a08g045-pinctrl - then: - properties: - drive-strength: false - output-impedance-ohms: false - slew-rate: false - else: - properties: - drive-strength-microamp: false - description: Pin controller client devices use pin configuration subnodes (children and grandchildren) for desired pin configuration. @@ -126,6 +116,16 @@ additionalProperties: output-high: true output-low: true line-name: true + bias-disable: true + bias-pull-down: true + bias-pull-up: true + renesas,output-impedance: + description: + Output impedance for pins on the RZ/V2H(P) SoC. The value provided by this + property corresponds to register bit values that can be set in the PFC_IOLH_mn + register, which adjusts the drive strength value and is pin-dependent. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] - type: object additionalProperties: @@ -134,6 +134,20 @@ additionalProperties: allOf: - $ref: pinctrl.yaml# + - if: + properties: + compatible: + contains: + const: renesas,r9a09g057-pinctrl + then: + properties: + resets: + maxItems: 2 + else: + properties: + resets: + minItems: 3 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml index f13d315b5d5e..ce66fd15ff9c 100644 --- a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -42,179 +42,187 @@ patternProperties: $ref: pinmux-node.yaml# properties: + pins: + description: + List of pins to select (either this or "groups" must be specified) + items: + pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$' + groups: description: List of groups to select (either this or "pins" must be specified), available groups for this subnode. items: - enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp, - ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp, - gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp, - mdio1_1_grp, mdio2_0_grp, mdio3_0_grp, - qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp, - spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp, - spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp, - spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp, - spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp, - spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp, - spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp, - spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp, - spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp, - spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp, - spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp, - spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp, - spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp, - spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp, - spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp, - spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp, - spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp, - sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, - sdio0_3_grp, sdio0_4_grp, sdio0_5_grp, - sdio0_6_grp, sdio0_7_grp, sdio0_8_grp, - sdio0_9_grp, sdio0_10_grp, sdio0_11_grp, - sdio0_12_grp, sdio0_13_grp, sdio0_14_grp, - sdio0_15_grp, sdio0_16_grp, sdio0_17_grp, - sdio0_18_grp, sdio0_19_grp, sdio0_20_grp, - sdio0_21_grp, sdio0_22_grp, sdio0_23_grp, - sdio0_24_grp, sdio0_25_grp, sdio0_26_grp, - sdio0_27_grp, sdio0_28_grp, sdio0_29_grp, - sdio0_30_grp, sdio0_31_grp, sdio0_32_grp, - sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp, - sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp, - sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp, - sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, - sdio1_3_grp, sdio1_4_grp, sdio1_5_grp, - sdio1_6_grp, sdio1_7_grp, sdio1_8_grp, - sdio1_9_grp, sdio1_10_grp, sdio1_11_grp, - sdio1_12_grp, sdio1_13_grp, sdio1_14_grp, - sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp, - sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp, - sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp, - nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp, - nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp, - can0_1_grp, can0_2_grp, can0_3_grp, - can0_4_grp, can0_5_grp, can0_6_grp, - can0_7_grp, can0_8_grp, can0_9_grp, - can0_10_grp, can0_11_grp, can0_12_grp, - can0_13_grp, can0_14_grp, can0_15_grp, - can0_16_grp, can0_17_grp, can0_18_grp, - can1_0_grp, can1_1_grp, can1_2_grp, - can1_3_grp, can1_4_grp, can1_5_grp, - can1_6_grp, can1_7_grp, can1_8_grp, - can1_9_grp, can1_10_grp, can1_11_grp, - can1_12_grp, can1_13_grp, can1_14_grp, - can1_15_grp, can1_16_grp, can1_17_grp, - can1_18_grp, can1_19_grp, uart0_0_grp, - uart0_1_grp, uart0_2_grp, uart0_3_grp, - uart0_4_grp, uart0_5_grp, uart0_6_grp, - uart0_7_grp, uart0_8_grp, uart0_9_grp, - uart0_10_grp, uart0_11_grp, uart0_12_grp, - uart0_13_grp, uart0_14_grp, uart0_15_grp, - uart0_16_grp, uart0_17_grp, uart0_18_grp, - uart1_0_grp, uart1_1_grp, uart1_2_grp, - uart1_3_grp, uart1_4_grp, uart1_5_grp, - uart1_6_grp, uart1_7_grp, uart1_8_grp, - uart1_9_grp, uart1_10_grp, uart1_11_grp, - uart1_12_grp, uart1_13_grp, uart1_14_grp, - uart1_15_grp, uart1_16_grp, uart1_17_grp, - uart1_18_grp, i2c0_0_grp, i2c0_1_grp, - i2c0_2_grp, i2c0_3_grp, i2c0_4_grp, - i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, - i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, - i2c0_11_grp, i2c0_12_grp, i2c0_13_grp, - i2c0_14_grp, i2c0_15_grp, i2c0_16_grp, - i2c0_17_grp, i2c0_18_grp, i2c1_0_grp, - i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, - i2c1_4_grp, i2c1_5_grp, i2c1_6_grp, - i2c1_7_grp, i2c1_8_grp, i2c1_9_grp, - i2c1_10_grp, i2c1_11_grp, i2c1_12_grp, - i2c1_13_grp, i2c1_14_grp, i2c1_15_grp, - i2c1_16_grp, i2c1_17_grp, i2c1_18_grp, - i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp, - ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp, - ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp, - ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp, - ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp, - ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp, - ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp, - ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp, - ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp, - ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp, - ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp, - ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp, - ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp, - ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp, - ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp, - ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp, - ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp, - ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp, - ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp, - ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp, - ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp, - ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp, - ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp, - ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp, - ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp, - swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp, - swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp, - swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp, - swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp, - swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp, - swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp, - swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp, - swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp, - swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp, - swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp, - swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp, - swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp, - swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp, - swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp, - swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp, - swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp, - swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp, - gpio0_1_grp, gpio0_2_grp, gpio0_3_grp, - gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, - gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, - gpio0_10_grp, gpio0_11_grp, gpio0_12_grp, - gpio0_13_grp, gpio0_14_grp, gpio0_15_grp, - gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, - gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, - gpio0_22_grp, gpio0_23_grp, gpio0_24_grp, - gpio0_25_grp, gpio0_26_grp, gpio0_27_grp, - gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, - gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, - gpio0_34_grp, gpio0_35_grp, gpio0_36_grp, - gpio0_37_grp, gpio0_38_grp, gpio0_39_grp, - gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, - gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, - gpio0_46_grp, gpio0_47_grp, gpio0_48_grp, - gpio0_49_grp, gpio0_50_grp, gpio0_51_grp, - gpio0_52_grp, gpio0_53_grp, gpio0_54_grp, - gpio0_55_grp, gpio0_56_grp, gpio0_57_grp, - gpio0_58_grp, gpio0_59_grp, gpio0_60_grp, - gpio0_61_grp, gpio0_62_grp, gpio0_63_grp, - gpio0_64_grp, gpio0_65_grp, gpio0_66_grp, - gpio0_67_grp, gpio0_68_grp, gpio0_69_grp, - gpio0_70_grp, gpio0_71_grp, gpio0_72_grp, - gpio0_73_grp, gpio0_74_grp, gpio0_75_grp, - gpio0_76_grp, gpio0_77_grp, usb0_0_grp, - usb1_0_grp, pmu0_0_grp, pmu0_1_grp, - pmu0_2_grp, pmu0_3_grp, pmu0_4_grp, - pmu0_5_grp, pmu0_6_grp, pmu0_7_grp, - pmu0_8_grp, pmu0_9_grp, pmu0_10_grp, - pmu0_11_grp, pcie0_0_grp, pcie0_1_grp, - pcie0_2_grp, pcie0_3_grp, pcie0_4_grp, - pcie0_5_grp, pcie0_6_grp, pcie0_7_grp, - csu0_0_grp, csu0_1_grp, csu0_2_grp, - csu0_3_grp, csu0_4_grp, csu0_5_grp, - csu0_6_grp, csu0_7_grp, csu0_8_grp, - csu0_9_grp, csu0_10_grp, csu0_11_grp, - dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp, - dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp, - pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp, - pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp, - trace0_1_grp, trace0_clk_1_grp, trace0_2_grp, - trace0_clk_2_grp, testscan0_0_grp] + anyOf: + - pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$' + - enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp, + ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp, + gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp, + mdio1_1_grp, mdio2_0_grp, mdio3_0_grp, + qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp, + spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp, + spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp, + spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp, + spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp, + spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp, + spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp, + spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp, + spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp, + spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp, + spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp, + spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp, + spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp, + spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp, + spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp, + spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp, + spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp, + sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, + sdio0_3_grp, sdio0_4_grp, sdio0_5_grp, + sdio0_6_grp, sdio0_7_grp, sdio0_8_grp, + sdio0_9_grp, sdio0_10_grp, sdio0_11_grp, + sdio0_12_grp, sdio0_13_grp, sdio0_14_grp, + sdio0_15_grp, sdio0_16_grp, sdio0_17_grp, + sdio0_18_grp, sdio0_19_grp, sdio0_20_grp, + sdio0_21_grp, sdio0_22_grp, sdio0_23_grp, + sdio0_24_grp, sdio0_25_grp, sdio0_26_grp, + sdio0_27_grp, sdio0_28_grp, sdio0_29_grp, + sdio0_30_grp, sdio0_31_grp, sdio0_32_grp, + sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp, + sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp, + sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp, + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, + sdio1_3_grp, sdio1_4_grp, sdio1_5_grp, + sdio1_6_grp, sdio1_7_grp, sdio1_8_grp, + sdio1_9_grp, sdio1_10_grp, sdio1_11_grp, + sdio1_12_grp, sdio1_13_grp, sdio1_14_grp, + sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp, + sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp, + sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp, + nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp, + nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp, + can0_1_grp, can0_2_grp, can0_3_grp, + can0_4_grp, can0_5_grp, can0_6_grp, + can0_7_grp, can0_8_grp, can0_9_grp, + can0_10_grp, can0_11_grp, can0_12_grp, + can0_13_grp, can0_14_grp, can0_15_grp, + can0_16_grp, can0_17_grp, can0_18_grp, + can1_0_grp, can1_1_grp, can1_2_grp, + can1_3_grp, can1_4_grp, can1_5_grp, + can1_6_grp, can1_7_grp, can1_8_grp, + can1_9_grp, can1_10_grp, can1_11_grp, + can1_12_grp, can1_13_grp, can1_14_grp, + can1_15_grp, can1_16_grp, can1_17_grp, + can1_18_grp, can1_19_grp, uart0_0_grp, + uart0_1_grp, uart0_2_grp, uart0_3_grp, + uart0_4_grp, uart0_5_grp, uart0_6_grp, + uart0_7_grp, uart0_8_grp, uart0_9_grp, + uart0_10_grp, uart0_11_grp, uart0_12_grp, + uart0_13_grp, uart0_14_grp, uart0_15_grp, + uart0_16_grp, uart0_17_grp, uart0_18_grp, + uart1_0_grp, uart1_1_grp, uart1_2_grp, + uart1_3_grp, uart1_4_grp, uart1_5_grp, + uart1_6_grp, uart1_7_grp, uart1_8_grp, + uart1_9_grp, uart1_10_grp, uart1_11_grp, + uart1_12_grp, uart1_13_grp, uart1_14_grp, + uart1_15_grp, uart1_16_grp, uart1_17_grp, + uart1_18_grp, i2c0_0_grp, i2c0_1_grp, + i2c0_2_grp, i2c0_3_grp, i2c0_4_grp, + i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, + i2c0_11_grp, i2c0_12_grp, i2c0_13_grp, + i2c0_14_grp, i2c0_15_grp, i2c0_16_grp, + i2c0_17_grp, i2c0_18_grp, i2c1_0_grp, + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, + i2c1_4_grp, i2c1_5_grp, i2c1_6_grp, + i2c1_7_grp, i2c1_8_grp, i2c1_9_grp, + i2c1_10_grp, i2c1_11_grp, i2c1_12_grp, + i2c1_13_grp, i2c1_14_grp, i2c1_15_grp, + i2c1_16_grp, i2c1_17_grp, i2c1_18_grp, + i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp, + ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp, + ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp, + ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp, + ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp, + ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp, + ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp, + ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp, + ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp, + ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp, + ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp, + ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp, + ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp, + ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp, + ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp, + ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp, + ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp, + ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp, + ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp, + ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp, + ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp, + ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp, + ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp, + ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp, + ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp, + swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp, + swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp, + swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp, + swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp, + swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp, + swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp, + swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp, + swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp, + swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp, + swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp, + swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp, + swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp, + swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp, + swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp, + swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp, + swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp, + swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp, + gpio0_1_grp, gpio0_2_grp, gpio0_3_grp, + gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, + gpio0_10_grp, gpio0_11_grp, gpio0_12_grp, + gpio0_13_grp, gpio0_14_grp, gpio0_15_grp, + gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, + gpio0_22_grp, gpio0_23_grp, gpio0_24_grp, + gpio0_25_grp, gpio0_26_grp, gpio0_27_grp, + gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, + gpio0_34_grp, gpio0_35_grp, gpio0_36_grp, + gpio0_37_grp, gpio0_38_grp, gpio0_39_grp, + gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, + gpio0_46_grp, gpio0_47_grp, gpio0_48_grp, + gpio0_49_grp, gpio0_50_grp, gpio0_51_grp, + gpio0_52_grp, gpio0_53_grp, gpio0_54_grp, + gpio0_55_grp, gpio0_56_grp, gpio0_57_grp, + gpio0_58_grp, gpio0_59_grp, gpio0_60_grp, + gpio0_61_grp, gpio0_62_grp, gpio0_63_grp, + gpio0_64_grp, gpio0_65_grp, gpio0_66_grp, + gpio0_67_grp, gpio0_68_grp, gpio0_69_grp, + gpio0_70_grp, gpio0_71_grp, gpio0_72_grp, + gpio0_73_grp, gpio0_74_grp, gpio0_75_grp, + gpio0_76_grp, gpio0_77_grp, usb0_0_grp, + usb1_0_grp, pmu0_0_grp, pmu0_1_grp, + pmu0_2_grp, pmu0_3_grp, pmu0_4_grp, + pmu0_5_grp, pmu0_6_grp, pmu0_7_grp, + pmu0_8_grp, pmu0_9_grp, pmu0_10_grp, + pmu0_11_grp, pcie0_0_grp, pcie0_1_grp, + pcie0_2_grp, pcie0_3_grp, pcie0_4_grp, + pcie0_5_grp, pcie0_6_grp, pcie0_7_grp, + csu0_0_grp, csu0_1_grp, csu0_2_grp, + csu0_3_grp, csu0_4_grp, csu0_5_grp, + csu0_6_grp, csu0_7_grp, csu0_8_grp, + csu0_9_grp, csu0_10_grp, csu0_11_grp, + dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp, + dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp, + pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp, + pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp, + trace0_1_grp, trace0_clk_1_grp, trace0_2_grp, + trace0_clk_2_grp, testscan0_0_grp] maxItems: 78 function: @@ -230,9 +238,12 @@ patternProperties: pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0] required: - - groups - function + oneOf: + - required: [ groups ] + - required: [ pins ] + additionalProperties: false '^conf': diff --git a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml index 34c5c1c08ec1..3ce7dcecd87a 100644 --- a/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml +++ b/Documentation/devicetree/bindings/reset/nuvoton,ma35d1-reset.yaml @@ -18,6 +18,7 @@ properties: compatible: items: - const: nuvoton,ma35d1-reset + - const: syscon reg: maxItems: 1 @@ -37,7 +38,7 @@ examples: - | system-management@40460000 { - compatible = "nuvoton,ma35d1-reset"; + compatible = "nuvoton,ma35d1-reset", "syscon"; reg = <0x40460000 0x200>; #reset-cells = <1>; }; |