diff options
Diffstat (limited to 'Documentation/devicetree')
61 files changed, 994 insertions, 208 deletions
diff --git a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt index e56a1df3a9d3..dd906db34b32 100644 --- a/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt +++ b/Documentation/devicetree/bindings/clock/brcm,bcm2835-cprman.txt @@ -16,7 +16,20 @@ Required properties: - #clock-cells: Should be <1>. The permitted clock-specifier values can be found in include/dt-bindings/clock/bcm2835.h - reg: Specifies base physical address and size of the registers -- clocks: The external oscillator clock phandle +- clocks: phandles to the parent clocks used as input to the module, in + the following order: + + - External oscillator + - DSI0 byte clock + - DSI0 DDR2 clock + - DSI0 DDR clock + - DSI1 byte clock + - DSI1 DDR2 clock + - DSI1 DDR clock + + Only external oscillator is required. The DSI clocks may + not be present, in which case their children will be + unusable. Example: diff --git a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt b/Documentation/devicetree/bindings/clock/exynos4415-clock.txt deleted file mode 100644 index 847d98bae8cf..000000000000 --- a/Documentation/devicetree/bindings/clock/exynos4415-clock.txt +++ /dev/null @@ -1,38 +0,0 @@ -* Samsung Exynos4415 Clock Controller - -The Exynos4415 clock controller generates and supplies clock to various -consumer devices within the Exynos4415 SoC. - -Required properties: - -- compatible: should be one of the following: - - "samsung,exynos4415-cmu" - for the main system clocks controller - (CMU_LEFTBUS, CMU_RIGHTBUS, CMU_TOP, CMU_CPU clock domains). - - "samsung,exynos4415-cmu-dmc" - for the Exynos4415 SoC DRAM Memory - Controller (DMC) domain clock controller. - -- reg: physical base address of the controller and length of memory mapped - region. - -- #clock-cells: should be 1. - -Each clock is assigned an identifier and client nodes can use this identifier -to specify the clock which they consume. - -All available clocks are defined as preprocessor macros in -dt-bindings/clock/exynos4415.h header and can be used in device -tree sources. - -Example 1: An example of a clock controller node is listed below. - - cmu: clock-controller@10030000 { - compatible = "samsung,exynos4415-cmu"; - reg = <0x10030000 0x18000>; - #clock-cells = <1>; - }; - - cmu-dmc: clock-controller@105C0000 { - compatible = "samsung,exynos4415-cmu-dmc"; - reg = <0x105C0000 0x3000>; - #clock-cells = <1>; - }; diff --git a/Documentation/devicetree/bindings/clock/hi3660-clock.txt b/Documentation/devicetree/bindings/clock/hi3660-clock.txt new file mode 100644 index 000000000000..cc9b86c35758 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/hi3660-clock.txt @@ -0,0 +1,42 @@ +* Hisilicon Hi3660 Clock Controller + +The Hi3660 clock controller generates and supplies clock to various +controllers within the Hi3660 SoC. + +Required Properties: + +- compatible: the compatible should be one of the following strings to + indicate the clock controller functionality. + + - "hisilicon,hi3660-crgctrl" + - "hisilicon,hi3660-pctrl" + - "hisilicon,hi3660-pmuctrl" + - "hisilicon,hi3660-sctrl" + - "hisilicon,hi3660-iomcu" + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +Each clock is assigned an identifier and client nodes use this identifier +to specify the clock which they consume. + +All these identifier could be found in <dt-bindings/clock/hi3660-clock.h>. + +Examples: + crg_ctrl: clock-controller@fff35000 { + compatible = "hisilicon,hi3660-crgctrl", "syscon"; + reg = <0x0 0xfff35000 0x0 0x1000>; + #clock-cells = <1>; + }; + + uart0: serial@fdf02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0 0xfdf02000 0x0 0x1000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&crg_ctrl HI3660_CLK_MUX_UART0>, + <&crg_ctrl HI3660_PCLK>; + clock-names = "uartclk", "apb_pclk"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/idt,versaclock5.txt b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt new file mode 100644 index 000000000000..87e9c47a89a3 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/idt,versaclock5.txt @@ -0,0 +1,65 @@ +Binding for IDT VersaClock5 programmable i2c clock generator. + +The IDT VersaClock5 are programmable i2c clock generators providing +from 3 to 12 output clocks. + +==I2C device node== + +Required properties: +- compatible: shall be one of "idt,5p49v5923" , "idt,5p49v5933". +- reg: i2c device address, shall be 0x68 or 0x6a. +- #clock-cells: from common clock binding; shall be set to 1. +- clocks: from common clock binding; list of parent clock handles, + - 5p49v5923: (required) either or both of XTAL or CLKIN + reference clock. + - 5p49v5933: (optional) property not present (internal + Xtal used) or CLKIN reference + clock. +- clock-names: from common clock binding; clock input names, can be + - 5p49v5923: (required) either or both of "xin", "clkin". + - 5p49v5933: (optional) property not present or "clkin". + +==Mapping between clock specifier and physical pins== + +When referencing the provided clock in the DT using phandle and +clock specifier, the following mapping applies: + +5P49V5923: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT2 + +5P49V5933: + 0 -- OUT0_SEL_I2CB + 1 -- OUT1 + 2 -- OUT4 + +==Example== + +/* 25MHz reference crystal */ +ref25: ref25m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; +}; + +i2c-master-node { + + /* IDT 5P49V5923 i2c clock generator */ + vc5: clock-generator@6a { + compatible = "idt,5p49v5923"; + reg = <0x6a>; + #clock-cells = <1>; + + /* Connect XIN input to 25MHz reference */ + clocks = <&ref25m>; + clock-names = "xin"; + }; +}; + +/* Consumer referencing the 5P49V5923 pin OUT1 */ +consumer { + ... + clocks = <&vc5 1>; + ... +} diff --git a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt index 520562a7dc2a..c7b4e3a6b2c6 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-corediv-clock.txt @@ -7,6 +7,7 @@ Required properties: - compatible : must be "marvell,armada-370-corediv-clock", "marvell,armada-375-corediv-clock", "marvell,armada-380-corediv-clock", + "marvell,mv98dx3236-corediv-clock", - reg : must be the register address of Core Divider control register - #clock-cells : from common clock binding; shall be set to 1 diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt index 99c214660bdc..7f28506eaee7 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt @@ -3,6 +3,7 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms Required properties: - compatible : shall be one of the following: "marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP + "marvell,mv98dx3236-cpu-clock" - cpu clocks for 98DX3236 SoC - reg : Address and length of the clock complex register set, followed by address and length of the PMU DFS registers - #clock-cells : should be set to 1. diff --git a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt index 87d3714b956a..a7235e9e1c97 100644 --- a/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt +++ b/Documentation/devicetree/bindings/clock/qcom,rpmcc.txt @@ -11,6 +11,7 @@ Required properties : compatible "qcom,rpmcc" should be also included. "qcom,rpmcc-msm8916", "qcom,rpmcc" + "qcom,rpmcc-msm8974", "qcom,rpmcc" "qcom,rpmcc-apq8064", "qcom,rpmcc" - #clock-cells : shall contain 1 diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt index c46919412953..f4f944d81308 100644 --- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt @@ -42,6 +42,10 @@ Required Properties: Domain bindings in Documentation/devicetree/bindings/power/power_domain.txt. + - #reset-cells: Must be 1 + - The single reset specifier cell must be the module number, as defined + in the datasheet. + Examples -------- @@ -55,6 +59,7 @@ Examples clock-names = "extal", "extalr"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; @@ -69,5 +74,6 @@ Examples dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&cpg>; + resets = <&cpg 310>; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt new file mode 100644 index 000000000000..e71c675ba5da --- /dev/null +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3328-cru.txt @@ -0,0 +1,57 @@ +* Rockchip RK3328 Clock and Reset Unit + +The RK3328 clock controller generates and supplies clock to various +controllers within the SoC and also implements a reset controller for SoC +peripherals. + +Required Properties: + +- compatible: should be "rockchip,rk3328-cru" +- reg: physical base address of the controller and length of memory mapped + region. +- #clock-cells: should be 1. +- #reset-cells: should be 1. + +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files" + If missing pll rates are not changeable, due to the missing pll lock status. + +Each clock is assigned an identifier and client nodes can use this identifier +to specify the clock which they consume. All available clocks are defined as +preprocessor macros in the dt-bindings/clock/rk3328-cru.h headers and can be +used in device tree sources. Similar macros exist for the reset sources in +these files. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xin24m" - crystal input - required, + - "clkin_i2s" - external I2S clock - optional, + - "gmac_clkin" - external GMAC clock - optional + - "phy_50m_out" - output clock of the pll in the mac phy + +Example: Clock controller node: + + cru: clock-controller@ff440000 { + compatible = "rockchip,rk3328-cru"; + reg = <0x0 0xff440000 0x0 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller: + + uart0: serial@ff120000 { + compatible = "snps,dw-apb-uart"; + reg = <0xff120000 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART0>; + }; diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt index 3888dd33fcbd..3bc56fae90ac 100644 --- a/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt +++ b/Documentation/devicetree/bindings/clock/rockchip,rk3399-cru.txt @@ -13,6 +13,12 @@ Required Properties: - #clock-cells: should be 1. - #reset-cells: should be 1. +Optional Properties: + +- rockchip,grf: phandle to the syscon managing the "general register files". + It is used for GRF muxes, if missing any muxes present in the GRF will not + be available. + Each clock is assigned an identifier and client nodes can use this identifier to specify the clock which they consume. All available clocks are defined as preprocessor macros in the dt-bindings/clock/rk3399-cru.h headers and can be diff --git a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt index 8f19d87cbf24..b240121d2ac9 100644 --- a/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt +++ b/Documentation/devicetree/bindings/clock/st,stm32-rcc.txt @@ -10,6 +10,7 @@ Required properties: - compatible: Should be: "st,stm32f42xx-rcc" "st,stm32f469-rcc" + "st,stm32f746-rcc" - reg: should be register base and length as documented in the datasheet - #reset-cells: 1, see below @@ -84,6 +85,25 @@ The secondary index is bound with the following magic numbers: 12 CLK_I2SQ_PDIV (post divisor of pll i2s q divisor) 13 CLK_SAIQ_PDIV (post divisor of pll sai q divisor) + 14 CLK_HSI (Internal ocscillator clock) + 15 CLK_SYSCLK (System Clock) + 16 CLK_HDMI_CEC (HDMI-CEC clock) + 17 CLK_SPDIF (SPDIF-Rx clock) + 18 CLK_USART1 (U(s)arts clocks) + 19 CLK_USART2 + 20 CLK_USART3 + 21 CLK_UART4 + 22 CLK_UART5 + 23 CLK_USART6 + 24 CLK_UART7 + 25 CLK_UART8 + 26 CLK_I2C1 (I2S clocks) + 27 CLK_I2C2 + 28 CLK_I2C3 + 29 CLK_I2C4 + 30 CLK_LPTIMER (LPTimer1 clock) +) + Example: /* Misc clock, FCLK */ diff --git a/Documentation/devicetree/bindings/clock/stericsson,abx500.txt b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt new file mode 100644 index 000000000000..dbaa886b223e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/stericsson,abx500.txt @@ -0,0 +1,20 @@ +Clock bindings for ST-Ericsson ABx500 clocks + +Required properties : +- compatible : shall contain the following: + "stericsson,ab8500-clk" +- #clock-cells should be <1> + +The ABx500 clocks need to be placed as a subnode of an AB8500 +device node, see mfd/ab8500.txt + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/ste-ab8500.h header and can be used in device +tree sources. + +Example: + +clock-controller { + compatible = "stericsson,ab8500-clk"; + #clock-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/sun9i-de.txt b/Documentation/devicetree/bindings/clock/sun9i-de.txt new file mode 100644 index 000000000000..fb18f327b97a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sun9i-de.txt @@ -0,0 +1,28 @@ +Allwinner A80 Display Engine Clock Control Binding +-------------------------------------------------- + +Required properties : +- compatible: must contain one of the following compatibles: + - "allwinner,sun9i-a80-de-clks" + +- reg: Must contain the registers base address and length +- clocks: phandle to the clocks feeding the display engine subsystem. + Three are needed: + - "mod": the display engine module clock + - "dram": the DRAM bus clock for the system + - "bus": the bus clock for the whole display engine subsystem +- clock-names: Must contain the clock names described just above +- resets: phandle to the reset control for the display engine subsystem. +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example: +de_clocks: clock@3000000 { + compatible = "allwinner,sun9i-a80-de-clks"; + reg = <0x03000000 0x30>; + clocks = <&ccu CLK_DE>, <&ccu CLK_SDRAM>, <&ccu CLK_BUS_DE>; + clock-names = "mod", "dram", "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/sun9i-usb.txt b/Documentation/devicetree/bindings/clock/sun9i-usb.txt new file mode 100644 index 000000000000..3564bd4f2a20 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sun9i-usb.txt @@ -0,0 +1,24 @@ +Allwinner A80 USB Clock Control Binding +--------------------------------------- + +Required properties : +- compatible: must contain one of the following compatibles: + - "allwinner,sun9i-a80-usb-clocks" + +- reg: Must contain the registers base address and length +- clocks: phandle to the clocks feeding the USB subsystem. Two are needed: + - "bus": the bus clock for the whole USB subsystem + - "hosc": the high frequency oscillator (usually at 24MHz) +- clock-names: Must contain the clock names described just above +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example: +usb_clocks: clock@a08000 { + compatible = "allwinner,sun9i-a80-usb-clks"; + reg = <0x00a08000 0x8>; + clocks = <&ccu CLK_BUS_USB>, <&osc24M>; + clock-names = "bus", "hosc"; + #clock-cells = <1>; + #reset-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt index 74d44a4273f2..bae5668cf427 100644 --- a/Documentation/devicetree/bindings/clock/sunxi-ccu.txt +++ b/Documentation/devicetree/bindings/clock/sunxi-ccu.txt @@ -7,6 +7,8 @@ Required properties : - "allwinner,sun8i-a23-ccu" - "allwinner,sun8i-a33-ccu" - "allwinner,sun8i-h3-ccu" + - "allwinner,sun8i-v3s-ccu" + - "allwinner,sun9i-a80-ccu" - "allwinner,sun50i-a64-ccu" - reg: Must contain the registers base address and length diff --git a/Documentation/devicetree/bindings/clock/ti,cdce925.txt b/Documentation/devicetree/bindings/clock/ti,cdce925.txt index 4c7669ad681b..0d01f2d5cc36 100644 --- a/Documentation/devicetree/bindings/clock/ti,cdce925.txt +++ b/Documentation/devicetree/bindings/clock/ti,cdce925.txt @@ -1,15 +1,22 @@ -Binding for TO CDCE925 programmable I2C clock synthesizers. +Binding for TI CDCE913/925/937/949 programmable I2C clock synthesizers. Reference This binding uses the common clock binding[1]. [1] Documentation/devicetree/bindings/clock/clock-bindings.txt -[2] http://www.ti.com/product/cdce925 +[2] http://www.ti.com/product/cdce913 +[3] http://www.ti.com/product/cdce925 +[4] http://www.ti.com/product/cdce937 +[5] http://www.ti.com/product/cdce949 The driver provides clock sources for each output Y1 through Y5. Required properties: - - compatible: Shall be "ti,cdce925" + - compatible: Shall be one of the following: + - "ti,cdce913": 1-PLL, 3 Outputs + - "ti,cdce925": 2-PLL, 5 Outputs + - "ti,cdce937": 3-PLL, 7 Outputs + - "ti,cdce949": 4-PLL, 9 Outputs - reg: I2C device address. - clocks: Points to a fixed parent clock that provides the input frequency. - #clock-cells: From common clock bindings: Shall be 1. @@ -18,7 +25,7 @@ Optional properties: - xtal-load-pf: Crystal load-capacitor value to fine-tune performance on a board, or to compensate for external influences. -For both PLL1 and PLL2 an optional child node can be used to specify spread +For all PLL1, PLL2, ... an optional child node can be used to specify spread spectrum clocking parameters for a board. - spread-spectrum: SSC mode as defined in the data sheet. - spread-spectrum-center: Use "centered" mode instead of "max" mode. When diff --git a/Documentation/devicetree/bindings/clock/zx296718-clk.txt b/Documentation/devicetree/bindings/clock/zx296718-clk.txt index 8c18b7b237bf..4ad703808407 100644 --- a/Documentation/devicetree/bindings/clock/zx296718-clk.txt +++ b/Documentation/devicetree/bindings/clock/zx296718-clk.txt @@ -13,6 +13,9 @@ Required properties: "zte,zx296718-lsp1crm": zx296718 device level clock selection and gating + "zte,zx296718-audiocrm": + zx296718 audio clock selection, divider and gating + - reg: Address and length of the register set The clock consumer should specify the desired clock by having the clock diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt index e2768703ac2b..34c7fddcea39 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt +++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt @@ -56,6 +56,18 @@ Required properties for V3D: - interrupts: The interrupt number See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +Required properties for DSI: +- compatible: Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1" +- reg: Physical base address and length of the DSI block's registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- clocks: a) phy: The DSI PLL clock feeding the DSI analog PHY + b) escape: The DSI ESC clock from CPRMAN + c) pixel: The DSI pixel clock from CPRMAN +- clock-output-names: + The 3 clocks output from the DSI analog PHY: dsi[01]_byte, + dsi[01]_ddr2, and dsi[01]_ddr + [1] Documentation/devicetree/bindings/media/video-interfaces.txt Example: @@ -99,6 +111,29 @@ dpi: dpi@7e208000 { }; }; +dsi1: dsi@7e700000 { + compatible = "brcm,bcm2835-dsi1"; + reg = <0x7e700000 0x8c>; + interrupts = <2 12>; + #address-cells = <1>; + #size-cells = <0>; + #clock-cells = <1>; + + clocks = <&clocks BCM2835_PLLD_DSI1>, + <&clocks BCM2835_CLOCK_DSI1E>, + <&clocks BCM2835_CLOCK_DSI1P>; + clock-names = "phy", "escape", "pixel"; + + clock-output-names = "dsi1_byte", "dsi1_ddr2", "dsi1_ddr"; + + pitouchscreen: panel@0 { + compatible = "raspberrypi,touchscreen"; + reg = <0>; + + <...> + }; +}; + vec: vec@7e806000 { compatible = "brcm,bcm2835-vec"; reg = <0x7e806000 0x1000>; diff --git a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt index 6532a59c9b43..00ea670b8c4d 100644 --- a/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt +++ b/Documentation/devicetree/bindings/display/bridge/adi,adv7511.txt @@ -38,10 +38,22 @@ The following input format properties are required except in "rgb 1x" and - adi,input-justification: The input bit justification ("left", "evenly", "right"). +- avdd-supply: A 1.8V supply that powers up the AVDD pin on the chip. +- dvdd-supply: A 1.8V supply that powers up the DVDD pin on the chip. +- pvdd-supply: A 1.8V supply that powers up the PVDD pin on the chip. +- dvdd-3v-supply: A 3.3V supply that powers up the pin called DVDD_3V + on the chip. +- bgvdd-supply: A 1.8V supply that powers up the BGVDD pin. This is + needed only for ADV7511. + The following properties are required for ADV7533: - adi,dsi-lanes: Number of DSI data lanes connected to the DSI host. It should be one of 1, 2, 3 or 4. +- a2vdd-supply: 1.8V supply that powers up the A2VDD pin on the chip. +- v3p3-supply: A 3.3V supply that powers up the V3P3 pin on the chip. +- v1p2-supply: A supply that powers up the V1P2 pin on the chip. It can be + either 1.2V or 1.8V. Optional properties: diff --git a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt index 5e9a84d6e5f1..33bf981fbe33 100644 --- a/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt +++ b/Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt @@ -1,52 +1,33 @@ -DesignWare HDMI bridge bindings - -Required properties: -- compatible: platform specific such as: - * "snps,dw-hdmi-tx" - * "fsl,imx6q-hdmi" - * "fsl,imx6dl-hdmi" - * "rockchip,rk3288-dw-hdmi" -- reg: Physical base address and length of the controller's registers. -- interrupts: The HDMI interrupt number -- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks, - as described in Documentation/devicetree/bindings/clock/clock-bindings.txt, - the clocks are soc specific, the clock-names should be "iahb", "isfr" --port@[X]: SoC specific port nodes with endpoint definitions as defined - in Documentation/devicetree/bindings/media/video-interfaces.txt, - please refer to the SoC specific binding document: - * Documentation/devicetree/bindings/display/imx/hdmi.txt - * Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt - -Optional properties -- reg-io-width: the width of the reg:1,4, default set to 1 if not present -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing, - if the property is omitted, a functionally reduced I2C bus - controller on DW HDMI is probed -- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" - -Example: - hdmi: hdmi@0120000 { - compatible = "fsl,imx6q-hdmi"; - reg = <0x00120000 0x9000>; - interrupts = <0 115 0x04>; - gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; - clock-names = "iahb", "isfr"; - ddc-i2c-bus = <&i2c2>; - - port@0 { - reg = <0>; - - hdmi_mux_0: endpoint { - remote-endpoint = <&ipu1_di0_hdmi>; - }; - }; - - port@1 { - reg = <1>; - - hdmi_mux_1: endpoint { - remote-endpoint = <&ipu1_di1_hdmi>; - }; - }; - }; +Synopsys DesignWare HDMI TX Encoder +=================================== + +This document defines device tree properties for the Synopsys DesignWare HDMI +TX Encoder (DWC HDMI TX). It doesn't constitue a device tree binding +specification by itself but is meant to be referenced by platform-specific +device tree bindings. + +When referenced from platform device tree bindings the properties defined in +this document are defined as follows. The platform device tree bindings are +responsible for defining whether each property is required or optional. + +- reg: Memory mapped base address and length of the DWC HDMI TX registers. + +- reg-io-width: Width of the registers specified by the reg property. The + value is expressed in bytes and must be equal to 1 or 4 if specified. The + register width defaults to 1 if the property is not present. + +- interrupts: Reference to the DWC HDMI TX interrupt. + +- clocks: References to all the clocks specified in the clock-names property + as specified in Documentation/devicetree/bindings/clock/clock-bindings.txt. + +- clock-names: The DWC HDMI TX uses the following clocks. + + - "iahb" is the bus clock for either AHB and APB (mandatory). + - "isfr" is the internal register configuration clock (mandatory). + - "cec" is the HDMI CEC controller main clock (optional). + +- ports: The connectivity of the DWC HDMI TX with the rest of the system is + expressed in using ports as specified in the device graph bindings defined + in Documentation/devicetree/bindings/graph.txt. The numbering of the ports + is platform-specific. diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new file mode 100644 index 000000000000..6ec1a880ac18 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt @@ -0,0 +1,46 @@ +THS8135 Video DAC +----------------- + +This is the binding for Texas Instruments THS8135 Video DAC bridge. + +Required properties: + +- compatible: Must be "ti,ths8135" + +Required nodes: + +This device has two video ports. Their connections are modelled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for RGB input +- Video port 1 for VGA output + +Example +------- + +vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + vga_bridge_in: endpoint { + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + reg = <1>; + + vga_bridge_out: endpoint { + remote-endpoint = <&vga_con_in>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt index 38dc9d60eef8..305a0e72a900 100644 --- a/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt +++ b/Documentation/devicetree/bindings/display/hisilicon/hisi-ade.txt @@ -16,7 +16,7 @@ Required properties: "clk_ade_core" for the ADE core clock. "clk_codec_jpeg" for the media NOC QoS clock, which use the same clock with jpeg codec. - "clk_ade_pix" for the ADE pixel clok. + "clk_ade_pix" for the ADE pixel clock. - assigned-clocks: Should contain "clk_ade_core" and "clk_codec_jpeg" clocks' phandle + clock-specifier pairs. - assigned-clock-rates: clock rates, one for each entry in assigned-clocks. diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt index 1b756cf9afb0..66a8f86e5d12 100644 --- a/Documentation/devicetree/bindings/display/imx/hdmi.txt +++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt @@ -1,29 +1,36 @@ -Device-Tree bindings for HDMI Transmitter +Freescale i.MX6 DWC HDMI TX Encoder +=================================== -HDMI Transmitter -================ +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. -The HDMI Transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP -with accompanying PHY IP. Required properties: - - #address-cells : should be <1> - - #size-cells : should be <0> - - compatible : should be "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". - - gpr : should be <&gpr>. - The phandle points to the iomuxc-gpr region containing the HDMI - multiplexer control register. - - clocks, clock-names : phandles to the HDMI iahb and isrf clocks, as described - in Documentation/devicetree/bindings/clock/clock-bindings.txt and - Documentation/devicetree/bindings/clock/imx6q-clock.txt. - - port@[0-4]: Up to four port nodes with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt, - corresponding to the four inputs to the HDMI multiplexer. - -Optional properties: - - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing - -example: + +- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi". +- reg: See dw_hdmi.txt. +- interrupts: HDMI interrupt number +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports, + numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer. + Each port shall have a single endpoint. +- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI + multiplexer control register. + +Optional properties + +- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master + or the functionally-reduced I2C master contained in the DWC HDMI. When + connected to a system I2C master this property contains a phandle to that + I2C master controller. + + +Example: gpr: iomuxc-gpr@020e0000 { /* ... */ diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt index 67d0a58dbb77..43fac0fe09bb 100644 --- a/Documentation/devicetree/bindings/display/msm/gpu.txt +++ b/Documentation/devicetree/bindings/display/msm/gpu.txt @@ -1,23 +1,19 @@ Qualcomm adreno/snapdragon GPU Required properties: -- compatible: "qcom,adreno-3xx" +- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" + for example: "qcom,adreno-306.0", "qcom,adreno" + Note that you need to list the less specific "qcom,adreno" (since this + is what the device is matched on), in addition to the more specific + with the chip-id. - reg: Physical base address and length of the controller's registers. - interrupts: The interrupt signal from the gpu. - clocks: device clocks See ../clocks/clock-bindings.txt for details. - clock-names: the following clocks are required: - * "core_clk" - * "iface_clk" - * "mem_iface_clk" -- qcom,chipid: gpu chip-id. Note this may become optional for future - devices if we can reliably read the chipid from hw -- qcom,gpu-pwrlevels: list of operating points - - compatible: "qcom,gpu-pwrlevels" - - for each qcom,gpu-pwrlevel: - - qcom,gpu-freq: requested gpu clock speed - - NOTE: downstream android driver defines additional parameters to - configure memory bandwidth scaling per OPP. + * "core" + * "iface" + * "mem_iface" Example: @@ -25,28 +21,18 @@ Example: ... gpu: qcom,kgsl-3d0@4300000 { - compatible = "qcom,adreno-3xx"; + compatible = "qcom,adreno-320.2", "qcom,adreno"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; interrupts = <GIC_SPI 80 0>; interrupt-names = "kgsl_3d0_irq"; clock-names = - "core_clk", - "iface_clk", - "mem_iface_clk"; + "core", + "iface", + "mem_iface"; clocks = <&mmcc GFX3D_CLK>, <&mmcc GFX3D_AHB_CLK>, <&mmcc MMSS_IMEM_AHB_CLK>; - qcom,chipid = <0x03020100>; - qcom,gpu-pwrlevels { - compatible = "qcom,gpu-pwrlevels"; - qcom,gpu-pwrlevel@0 { - qcom,gpu-freq = <450000000>; - }; - qcom,gpu-pwrlevel@1 { - qcom,gpu-freq = <27000000>; - }; - }; }; }; diff --git a/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt new file mode 100644 index 000000000000..eed48c3d4875 --- /dev/null +++ b/Documentation/devicetree/bindings/display/multi-inno,mi0283qt.txt @@ -0,0 +1,27 @@ +Multi-Inno MI0283QT display panel + +Required properties: +- compatible: "multi-inno,mi0283qt". + +The node for this driver must be a child node of a SPI controller, hence +all mandatory properties described in ../spi/spi-bus.txt must be specified. + +Optional properties: +- dc-gpios: D/C pin. The presence/absence of this GPIO determines + the panel interface mode (IM[3:0] pins): + - present: IM=x110 4-wire 8-bit data serial interface + - absent: IM=x101 3-wire 9-bit data serial interface +- reset-gpios: Reset pin +- power-supply: A regulator node for the supply voltage. +- backlight: phandle of the backlight device attached to the panel +- rotation: panel rotation in degrees counter clockwise (0,90,180,270) + +Example: + mi0283qt@0{ + compatible = "multi-inno,mi0283qt"; + reg = <0>; + spi-max-frequency = <32000000>; + rotation = <90>; + dc-gpios = <&gpio 25 0>; + backlight = <&backlight>; + }; diff --git a/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt new file mode 100644 index 000000000000..b258d6a91ec6 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/boe,nv101wxmn51.txt @@ -0,0 +1,7 @@ +BOE OPTOELECTRONICS TECHNOLOGY 10.1" WXGA TFT LCD panel + +Required properties: +- compatible: should be "boe,nv101wxmn51" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt new file mode 100644 index 000000000000..c6d06b5eab51 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/netron-dy,e231732.txt @@ -0,0 +1,7 @@ +Netron-DY E231732 7.0" WSVGA TFT LCD panel + +Required properties: +- compatible: should be "netron-dy,e231732" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/panel/panel.txt b/Documentation/devicetree/bindings/display/panel/panel.txt new file mode 100644 index 000000000000..e2e6867852b8 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/panel.txt @@ -0,0 +1,4 @@ +Common display properties +------------------------- + +- rotation: Display rotation in degrees counter clockwise (0,90,180,270) diff --git a/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt new file mode 100644 index 000000000000..eb9501a82e25 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/tianma,tm070jdhg30.txt @@ -0,0 +1,7 @@ +Tianma Micro-electronics TM070JDHG30 7.0" WXGA TFT LCD panel + +Required properties: +- compatible: should be "tianma,tm070jdhg30" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt index 668091f27674..046076c6b277 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_hdmi-rockchip.txt @@ -1,24 +1,39 @@ -Rockchip specific extensions to the Synopsys Designware HDMI -================================ +Rockchip DWC HDMI TX Encoder +============================ + +The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP +with a companion PHY IP. + +These DT bindings follow the Synopsys DWC HDMI TX bindings defined in +Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the +following device-specific properties. + Required properties: -- compatible: "rockchip,rk3288-dw-hdmi"; -- reg: Physical base address and length of the controller's registers. -- clocks: phandle to hdmi iahb and isfr clocks. -- clock-names: should be "iahb" "isfr" -- rockchip,grf: this soc should set GRF regs to mux vopl/vopb. + +- compatible: Shall contain "rockchip,rk3288-dw-hdmi". +- reg: See dw_hdmi.txt. +- reg-io-width: See dw_hdmi.txt. Shall be 4. - interrupts: HDMI interrupt number -- ports: contain a port node with endpoint definitions as defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. For - vopb,set the reg = <0> and set the reg = <1> for vopl. -- reg-io-width: the width of the reg:1,4, the value should be 4 on - rk3288 platform +- clocks: See dw_hdmi.txt. +- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt. +- ports: See dw_hdmi.txt. The DWC HDMI shall have a single port numbered 0 + corresponding to the video input of the controller. The port shall have two + endpoints, numbered 0 and 1, connected respectively to the vopb and vopl. +- rockchip,grf: Shall reference the GRF to mux vopl/vopb. Optional properties -- ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing -- clocks, clock-names: phandle to the HDMI CEC clock, name should be "cec" + +- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master + or the functionally-reduced I2C master contained in the DWC HDMI. When + connected to a system I2C master this property contains a phandle to that + I2C master controller. +- clock-names: See dw_hdmi.txt. The "cec" clock is optional. +- clock-names: May contain "cec" as defined in dw_hdmi.txt. + Example: + hdmi: hdmi@ff980000 { compatible = "rockchip,rk3288-dw-hdmi"; reg = <0xff980000 0x20000>; diff --git a/Documentation/devicetree/bindings/display/ssd1307fb.txt b/Documentation/devicetree/bindings/display/ssd1307fb.txt index eb31ed47a283..209d931ef16c 100644 --- a/Documentation/devicetree/bindings/display/ssd1307fb.txt +++ b/Documentation/devicetree/bindings/display/ssd1307fb.txt @@ -8,14 +8,15 @@ Required properties: 0x3c or 0x3d - pwm: Should contain the pwm to use according to the OF device tree PWM specification [0]. Only required for the ssd1307. - - reset-gpios: Should contain the GPIO used to reset the OLED display - solomon,height: Height in pixel of the screen driven by the controller - solomon,width: Width in pixel of the screen driven by the controller - solomon,page-offset: Offset of pages (band of 8 pixels) that the screen is mapped to. Optional properties: - - reset-active-low: Is the reset gpio is active on physical low? + - reset-gpios: The GPIO used to reset the OLED display, if available. See + Documentation/devicetree/bindings/gpio/gpio.txt for details. + - vbat-supply: The supply for VBAT - solomon,segment-no-remap: Display needs normal (non-inverted) data column to segment mapping - solomon,com-seq: Display uses sequential COM pin configuration diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt index 740e5bd2e4f7..9c356284232b 100644 --- a/Documentation/devicetree/bindings/display/zte,vou.txt +++ b/Documentation/devicetree/bindings/display/zte,vou.txt @@ -49,6 +49,15 @@ Required properties: "osc_clk" "xclk" +* TV Encoder output device + +Required properties: + - compatible: should be "zte,zx296718-tvenc" + - reg: Physical base address and length of the TVENC device IO region + - zte,tvenc-power-control: the phandle to SYSCTRL block followed by two + integer cells. The first cell is the offset of SYSCTRL register used + to control TV Encoder DAC power, and the second cell is the bit mask. + Example: vou: vou@1440000 { @@ -81,4 +90,10 @@ vou: vou@1440000 { <&topcrm HDMI_XCLK>; clock-names = "osc_cec", "osc_clk", "xclk"; }; + + tvenc: tvenc@2000 { + compatible = "zte,zx296718-tvenc"; + reg = <0x2000 0x1000>; + zte,tvenc-power-control = <&sysctrl 0x170 0x10>; + }; }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt index cf53d5fba20a..aa097045a10e 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt @@ -19,7 +19,14 @@ Optional Properties: - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all children in idle state. This is necessary for example, if there are several multiplexers on the bus and the devices behind them use same I2C addresses. - + - interrupt-parent: Phandle for the interrupt controller that services + interrupts for this device. + - interrupts: Interrupt mapping for IRQ. + - interrupt-controller: Marks the device node as an interrupt controller. + - #interrupt-cells : Should be two. + - first cell is the pin number + - second cell is used to specify flags. + See also Documentation/devicetree/bindings/interrupt-controller/interrupts.txt Example: @@ -29,6 +36,11 @@ Example: #size-cells = <0>; reg = <0x74>; + interrupt-parent = <&ipic>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; + i2c@2 { #address-cells = <1>; #size-cells = <0>; diff --git a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt index 7716acc55dec..ae9c2a735f39 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-sh_mobile.txt @@ -10,6 +10,7 @@ Required properties: - "renesas,iic-r8a7793" (R-Car M2-N) - "renesas,iic-r8a7794" (R-Car E2) - "renesas,iic-r8a7795" (R-Car H3) + - "renesas,iic-r8a7796" (R-Car M3-W) - "renesas,iic-sh73a0" (SH-Mobile AG5) - "renesas,rcar-gen2-iic" (generic R-Car Gen2 compatible device) - "renesas,rcar-gen3-iic" (generic R-Car Gen3 compatible device) diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt new file mode 100644 index 000000000000..78eaf7b718ed --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt @@ -0,0 +1,33 @@ +* I2C controller embedded in STMicroelectronics STM32 I2C platform + +Required properties : +- compatible : Must be "st,stm32f4-i2c" +- reg : Offset and length of the register set for the device +- interrupts : Must contain the interrupt id for I2C event and then the + interrupt id for I2C error. +- resets: Must contain the phandle to the reset controller. +- clocks: Must contain the input clock of the I2C instance. +- A pinctrl state named "default" must be defined to set pins in mode of + operation for I2C transfer +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties : +- clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, + the default 100 kHz frequency will be used. As only Normal and Fast modes + are supported, possible values are 100000 and 400000. + +Example : + + i2c@40005400 { + compatible = "st,stm32f4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x40005400 0x400>; + interrupts = <31>, + <32>; + resets = <&rcc 277>; + clocks = <&rcc 0 149>; + pinctrl-0 = <&i2c1_sda_pin>, <&i2c1_scl_pin>; + pinctrl-names = "default"; + }; diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt new file mode 100644 index 000000000000..ab240e10debc --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra186-bpmp-i2c.txt @@ -0,0 +1,42 @@ +NVIDIA Tegra186 BPMP I2C controller + +In Tegra186, the BPMP (Boot and Power Management Processor) owns certain HW +devices, such as the I2C controller for the power management I2C bus. Software +running on other CPUs must perform IPC to the BPMP in order to execute +transactions on that I2C bus. This binding describes an I2C bus that is +accessed in such a fashion. + +The BPMP I2C node must be located directly inside the main BPMP node. See +../firmware/nvidia,tegra186-bpmp.txt for details of the BPMP binding. + +This node represents an I2C controller. See ../i2c/i2c.txt for details of the +core I2C binding. + +Required properties: +- compatible: + Array of strings. + One of: + - "nvidia,tegra186-bpmp-i2c". +- #address-cells: Address cells for I2C device address. + Single-cell integer. + Must be <1>. +- #size-cells: + Single-cell integer. + Must be <0>. +- nvidia,bpmp-bus-id: + Single-cell integer. + Indicates the I2C bus number this DT node represent, as defined by the + BPMP firmware. + +Example: + +bpmp { + ... + + i2c { + compatible = "nvidia,tegra186-bpmp-i2c"; + #address-cells = <1>; + #size-cells = <0>; + nvidia,bpmp-bus-id = <5>; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt index 485bc59fcc48..3c91ad430eea 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-rpm.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-rpm.txt @@ -234,7 +234,7 @@ see regulator.txt - with additional custom properties described below: - qcom,switch-mode-frequency: Usage: required Value type: <u32> - Definition: Frequency (Hz) of the swith mode power supply; + Definition: Frequency (Hz) of the switch mode power supply; must be one of: 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt index 7aa840c8768d..ae4234ca4ee4 100644 --- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt +++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt @@ -1,7 +1,7 @@ * Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA) Required properties: -- compatible: could be one of the followings +- compatible: could be one of the following: "marvell,armada-370-neta" "marvell,armada-xp-neta" "marvell,armada-3700-neta" diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt index 9f5ca4457b5f..63725498bd20 100644 --- a/Documentation/devicetree/bindings/opp/opp.txt +++ b/Documentation/devicetree/bindings/opp/opp.txt @@ -136,7 +136,7 @@ Optional properties: larger OPP table, based on what version of the hardware we are running on. We still can't have multiple nodes with the same opp-hz value in OPP table. - It's an user defined array containing a hierarchy of hardware version numbers, + It's a user defined array containing a hierarchy of hardware version numbers, supported by the OPP. For example: a platform with hierarchy of three levels of versions (A, B and C), this field should be like <X Y Z>, where X corresponds to Version hierarchy A, Y corresponds to version hierarchy B and Z @@ -188,14 +188,14 @@ Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together. opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>; + opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp@1100000000 { opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <980000 1000000 1010000>; + opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; @@ -267,14 +267,14 @@ independently. opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>; + opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp@1100000000 { opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <980000 1000000 1010000>; + opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; @@ -343,14 +343,14 @@ DVFS state together. opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>; + opp-microvolt = <975000 970000 985000>; opp-microamp = <70000>; clock-latency-ns = <300000>; opp-suspend; }; opp@1100000000 { opp-hz = /bits/ 64 <1100000000>; - opp-microvolt = <980000 1000000 1010000>; + opp-microvolt = <1000000 980000 1010000>; opp-microamp = <80000>; clock-latency-ns = <310000>; }; @@ -369,7 +369,7 @@ DVFS state together. opp@1300000000 { opp-hz = /bits/ 64 <1300000000>; - opp-microvolt = <1045000 1050000 1055000>; + opp-microvolt = <1050000 1045000 1055000>; opp-microamp = <95000>; clock-latency-ns = <400000>; opp-suspend; @@ -382,7 +382,7 @@ DVFS state together. }; opp@1500000000 { opp-hz = /bits/ 64 <1500000000>; - opp-microvolt = <1010000 1100000 1110000>; + opp-microvolt = <1100000 1010000 1110000>; opp-microamp = <95000>; clock-latency-ns = <400000>; turbo-mode; @@ -424,9 +424,9 @@ Example 4: Handling multiple regulators opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>, /* Supply 0 */ - <960000 965000 975000>, /* Supply 1 */ - <960000 965000 975000>; /* Supply 2 */ + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ opp-microamp = <70000>, /* Supply 0 */ <70000>, /* Supply 1 */ <70000>; /* Supply 2 */ @@ -437,9 +437,9 @@ Example 4: Handling multiple regulators opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt = <970000 975000 985000>, /* Supply 0 */ - <960000 965000 975000>, /* Supply 1 */ - <960000 965000 975000>; /* Supply 2 */ + opp-microvolt = <975000 970000 985000>, /* Supply 0 */ + <965000 960000 975000>, /* Supply 1 */ + <965000 960000 975000>; /* Supply 2 */ opp-microamp = <70000>, /* Supply 0 */ <0>, /* Supply 1 doesn't need this */ <70000>; /* Supply 2 */ @@ -474,7 +474,7 @@ Example 5: opp-supported-hw */ opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF> opp-hz = /bits/ 64 <600000000>; - opp-microvolt = <900000 915000 925000>; + opp-microvolt = <915000 900000 925000>; ... }; @@ -487,7 +487,7 @@ Example 5: opp-supported-hw */ opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0> opp-hz = /bits/ 64 <800000000>; - opp-microvolt = <900000 915000 925000>; + opp-microvolt = <915000 900000 925000>; ... }; }; @@ -512,18 +512,18 @@ Example 6: opp-microvolt-<name>, opp-microamp-<name>: opp@1000000000 { opp-hz = /bits/ 64 <1000000000>; - opp-microvolt-slow = <900000 915000 925000>; - opp-microvolt-fast = <970000 975000 985000>; + opp-microvolt-slow = <915000 900000 925000>; + opp-microvolt-fast = <975000 970000 985000>; opp-microamp-slow = <70000>; opp-microamp-fast = <71000>; }; opp@1200000000 { opp-hz = /bits/ 64 <1200000000>; - opp-microvolt-slow = <900000 915000 925000>, /* Supply vcc0 */ - <910000 925000 935000>; /* Supply vcc1 */ - opp-microvolt-fast = <970000 975000 985000>, /* Supply vcc0 */ - <960000 965000 975000>; /* Supply vcc1 */ + opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */ + <925000 910000 935000>; /* Supply vcc1 */ + opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */ + <965000 960000 975000>; /* Supply vcc1 */ opp-microamp = <70000>; /* Will be used for both slow/fast */ }; }; diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index 7c85dca4221a..2fd688c8dbdb 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -6,7 +6,7 @@ the first two functions being GPIO in and out. The configuration on the pins includes drive strength and pull-up. Required properties: -- compatible: Should be one of the followings (depending on you SoC): +- compatible: Should be one of the following (depending on your SoC): "allwinner,sun4i-a10-pinctrl" "allwinner,sun5i-a10s-pinctrl" "allwinner,sun5i-a13-pinctrl" diff --git a/Documentation/devicetree/bindings/power/pd-samsung.txt b/Documentation/devicetree/bindings/power/pd-samsung.txt index 7eb9674e9687..549f7dee9b9d 100644 --- a/Documentation/devicetree/bindings/power/pd-samsung.txt +++ b/Documentation/devicetree/bindings/power/pd-samsung.txt @@ -23,7 +23,7 @@ Optional Properties: - clock-names: The following clocks can be specified: - oscclk: Oscillator clock. - clkN: Input clocks to the devices in this power domain. These clocks - will be reparented to oscclk before swithing power domain off. + will be reparented to oscclk before switching power domain off. Their original parent will be brought back after turning on the domain. Maximum of 4 clocks (N = 0 to 3) are supported. - asbN: Clocks required by asynchronous bridges (ASB) present in diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt index e00c2e9f484d..c61bdf8cd41b 100644 --- a/Documentation/devicetree/bindings/pwm/imx-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt @@ -6,8 +6,8 @@ Required properties: - "fsl,imx1-pwm" for PWM compatible with the one integrated on i.MX1 - "fsl,imx27-pwm" for PWM compatible with the one integrated on i.MX27 - reg: physical base address and length of the controller's registers -- #pwm-cells: should be 2. See pwm.txt in this directory for a description of - the cells format. +- #pwm-cells: 2 for i.MX1 and 3 for i.MX27 and newer SoCs. See pwm.txt + in this directory for a description of the cells format. - clocks : Clock specifiers for both ipg and per clocks. - clock-names : Clock names should include both "ipg" and "per" See the clock consumer binding, @@ -17,7 +17,7 @@ See the clock consumer binding, Example: pwm1: pwm@53fb4000 { - #pwm-cells = <2>; + #pwm-cells = <3>; compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; reg = <0x53fb4000 0x4000>; clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>, diff --git a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt index 2eb9d4ee7dc0..c3c9a1226f9a 100644 --- a/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/armada-380-rtc.txt @@ -1,9 +1,11 @@ -* Real Time Clock of the Armada 38x SoCs +* Real Time Clock of the Armada 38x/7K/8K SoCs -RTC controller for the Armada 38x SoCs +RTC controller for the Armada 38x, 7K and 8K SoCs Required properties: -- compatible : Should be "marvell,armada-380-rtc" +- compatible : Should be one of the following: + "marvell,armada-380-rtc" for Armada 38x SoC + "marvell,armada-8k-rtc" for Aramda 7K/8K SoCs - reg: a list of base address and size pairs, one for each entry in reg-names - reg names: should contain: diff --git a/Documentation/devicetree/bindings/rtc/cortina,gemini.txt b/Documentation/devicetree/bindings/rtc/cortina,gemini.txt new file mode 100644 index 000000000000..4ce4e794ddbb --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/cortina,gemini.txt @@ -0,0 +1,14 @@ +* Cortina Systems Gemini RTC + +Gemini SoC real-time clock. + +Required properties: +- compatible : Should be "cortina,gemini-rtc" + +Examples: + +rtc@45000000 { + compatible = "cortina,gemini-rtc"; + reg = <0x45000000 0x100>; + interrupts = <17 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt index c9d80d7da141..323cf26374cb 100644 --- a/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/imxdi-rtc.txt @@ -8,10 +8,13 @@ Required properties: region. - interrupts: rtc alarm interrupt +Optional properties: +- interrupts: dryice security violation interrupt + Example: rtc@80056000 { compatible = "fsl,imx53-rtc", "fsl,imx25-rtc"; reg = <0x80056000 2000>; - interrupts = <29>; + interrupts = <29 56>; }; diff --git a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt index 1ad4c1c2b3b3..85be53a42180 100644 --- a/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt +++ b/Documentation/devicetree/bindings/rtc/maxim,ds3231.txt @@ -1,7 +1,8 @@ * Maxim DS3231 Real Time Clock Required properties: -see: Documentation/devicetree/bindings/i2c/trivial-admin-guide/devices.rst +- compatible: Should contain "maxim,ds3231". +- reg: I2C address for chip. Optional property: - #clock-cells: Should be 1. diff --git a/Documentation/devicetree/bindings/rtc/pcf8563.txt b/Documentation/devicetree/bindings/rtc/pcf8563.txt index 086c998c5561..36984acbb383 100644 --- a/Documentation/devicetree/bindings/rtc/pcf8563.txt +++ b/Documentation/devicetree/bindings/rtc/pcf8563.txt @@ -3,7 +3,8 @@ Philips PCF8563/Epson RTC8564 Real Time Clock Required properties: -see: Documentation/devicetree/bindings/i2c/trivial-admin-guide/devices.rst +- compatible: Should contain "nxp,pcf8563". +- reg: I2C address for chip. Optional property: - #clock-cells: Should be 0. diff --git a/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt new file mode 100644 index 000000000000..e2837b951237 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/st,stm32-rtc.txt @@ -0,0 +1,27 @@ +STM32 Real Time Clock + +Required properties: +- compatible: "st,stm32-rtc". +- reg: address range of rtc register set. +- clocks: reference to the clock entry ck_rtc. +- interrupt-parent: phandle for the interrupt controller. +- interrupts: rtc alarm interrupt. +- st,syscfg: phandle for pwrcfg, mandatory to disable/enable backup domain + (RTC registers) write protection. + +Optional properties (to override default ck_rtc parent clock): +- assigned-clocks: reference to the ck_rtc clock entry. +- assigned-clock-parents: phandle of the new parent clock of ck_rtc. + +Example: + + rtc: rtc@40002800 { + compatible = "st,stm32-rtc"; + reg = <0x40002800 0x400>; + clocks = <&rcc 1 CLK_RTC>; + assigned-clocks = <&rcc 1 CLK_RTC>; + assigned-clock-parents = <&rcc 1 CLK_LSE>; + interrupt-parent = <&exti>; + interrupts = <17 1>; + st,syscfg = <&pwrcfg>; + }; diff --git a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt index f007e428a1ab..945934918b71 100644 --- a/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt +++ b/Documentation/devicetree/bindings/rtc/sun6i-rtc.txt @@ -8,10 +8,20 @@ Required properties: memory mapped region. - interrupts : IRQ lines for the RTC alarm 0 and alarm 1, in that order. +Required properties for new device trees +- clocks : phandle to the 32kHz external oscillator +- clock-output-names : name of the LOSC clock created +- #clock-cells : must be equals to 1. The RTC provides two clocks: the + LOSC and its external output, with index 0 and 1 + respectively. + Example: rtc: rtc@01f00000 { compatible = "allwinner,sun6i-a31-rtc"; reg = <0x01f00000 0x54>; interrupts = <0 40 4>, <0 41 4>; + clock-output-names = "osc32k"; + clocks = <&ext_osc32k>; + #clock-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt index c6e62cb30712..a0685c209218 100644 --- a/Documentation/devicetree/bindings/soc/rockchip/grf.txt +++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt @@ -10,7 +10,7 @@ From RK3368 SoCs, the GRF is divided into two sections, Required Properties: -- compatible: GRF should be one of the followings +- compatible: GRF should be one of the following: - "rockchip,rk3036-grf", "syscon": for rk3036 - "rockchip,rk3066-grf", "syscon": for rk3066 - "rockchip,rk3188-grf", "syscon": for rk3188 @@ -18,7 +18,7 @@ Required Properties: - "rockchip,rk3288-grf", "syscon": for rk3288 - "rockchip,rk3368-grf", "syscon": for rk3368 - "rockchip,rk3399-grf", "syscon": for rk3399 -- compatible: PMUGRF should be one of the followings +- compatible: PMUGRF should be one of the following: - "rockchip,rk3368-pmugrf", "syscon": for rk3368 - "rockchip,rk3399-pmugrf", "syscon": for rk3399 - compatible: SGRF should be one of the following diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt index 4ea29aa9af59..a6600f6dea64 100644 --- a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -5,7 +5,7 @@ audio data transfer between devices in the system. Required properties: -- compatible: should be one of the followings +- compatible: should be one of the following: - "rockchip,rk3066-i2s": for rk3066 - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 @@ -17,7 +17,7 @@ Required properties: Documentation/devicetree/bindings/dma/dma.txt - dma-names: should include "tx" and "rx". - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain followings: +- clock-names: should contain the following: - "i2s_hclk": clock for I2S BUS - "i2s_clk" : clock for I2S controller - rockchip,playback-channels: max playback channels, if not set, 8 channels default. diff --git a/Documentation/devicetree/bindings/sound/rt5665.txt b/Documentation/devicetree/bindings/sound/rt5665.txt index 419c89219681..419c89219681 100755..100644 --- a/Documentation/devicetree/bindings/sound/rt5665.txt +++ b/Documentation/devicetree/bindings/sound/rt5665.txt diff --git a/Documentation/devicetree/bindings/sound/sun4i-codec.txt b/Documentation/devicetree/bindings/sound/sun4i-codec.txt index 3033bd8aab0f..3863531d1e6d 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-codec.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-codec.txt @@ -14,7 +14,7 @@ Required properties: - dma-names: should include "tx" and "rx". - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain followings: +- clock-names: should contain the following: - "apb": the parent APB clock for this controller - "codec": the parent module clock diff --git a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt index f4adc58f82ba..ee21da865771 100644 --- a/Documentation/devicetree/bindings/sound/sun4i-i2s.txt +++ b/Documentation/devicetree/bindings/sound/sun4i-i2s.txt @@ -5,7 +5,7 @@ audio data transfer between devices in the system. Required properties: -- compatible: should be one of the followings +- compatible: should be one of the following: - "allwinner,sun4i-a10-i2s" - "allwinner,sun6i-a31-i2s" - reg: physical base address of the controller and length of memory mapped @@ -15,7 +15,7 @@ Required properties: Documentation/devicetree/bindings/dma/dma.txt - dma-names: should include "tx" and "rx". - clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. -- clock-names: should contain followings: +- clock-names: should contain the following: - "apb" : clock for the I2S bus interface - "mod" : module clock for the I2S controller - #sound-dai-cells : Must be equal to 0 diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt index 66223d561972..20ca4ef9d776 100644 --- a/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.txt @@ -17,6 +17,12 @@ Required properties: calibration data, as specified by the SoC reference manual. The first cell of each pair is the value to be written to TTCFGR, and the second is the value to be written to TSCFGR. +- #thermal-sensor-cells : Must be 1. The sensor specifier is the monitoring + site ID, and represents the "n" in TRITSRn and TRATSRn. + +Optional property: +- little-endian : If present, the TMU registers are little endian. If absent, + the default is big endian. Example: @@ -60,4 +66,5 @@ tmu@f0000 { 0x00030000 0x00000012 0x00030001 0x0000001d>; + #thermal-sensor-cells = <1>; }; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt new file mode 100644 index 000000000000..07a9713ae6a7 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.txt @@ -0,0 +1,56 @@ +* DT bindings for Renesas R-Car Gen3 Thermal Sensor driver + +On R-Car Gen3 SoCs, the thermal sensor controllers (TSC) control the thermal +sensors (THS) which are the analog circuits for measuring temperature (Tj) +inside the LSI. + +Required properties: +- compatible : "renesas,<soctype>-thermal", + Examples with soctypes are: + - "renesas,r8a7795-thermal" (R-Car H3) + - "renesas,r8a7796-thermal" (R-Car M3-W) +- reg : Address ranges of the thermal registers. Each sensor + needs one address range. Sorting must be done in + increasing order according to datasheet, i.e. + TSC1, TSC2, ... +- clocks : Must contain a reference to the functional clock. +- #thermal-sensor-cells : must be <1>. + +Optional properties: + +- interrupts : interrupts routed to the TSC (3 for H3 and M3-W) +- power-domain : Must contain a reference to the power domain. This + property is mandatory if the thermal sensor instance + is part of a controllable power domain. + +Example: + + tsc: thermal@e6198000 { + compatible = "renesas,r8a7795-thermal"; + reg = <0 0xe6198000 0 0x68>, + <0 0xe61a0000 0 0x5c>, + <0 0xe61a8000 0 0x5c>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + #thermal-sensor-cells = <1>; + status = "okay"; + }; + + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <90000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt new file mode 100644 index 000000000000..3dc1c6bf0478 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/zx2967-thermal.txt @@ -0,0 +1,116 @@ +* ZTE zx2967 family Thermal + +Required Properties: +- compatible: should be one of the following. + * zte,zx296718-thermal +- reg: physical base address of the controller and length of memory mapped + region. +- clocks : Pairs of phandle and specifier referencing the controller's clocks. +- clock-names: "topcrm" for the topcrm clock. + "apb" for the apb clock. +- #thermal-sensor-cells: must be 0. + +Please note: slope coefficient defined in thermal-zones section need to be +multiplied by 1000. + +Example for tempsensor: + + tempsensor: tempsensor@148a000 { + compatible = "zte,zx296718-thermal"; + reg = <0x0148a000 0x20>; + clocks = <&topcrm TEMPSENSOR_GATE>, <&audiocrm AUDIO_TS_PCLK>; + clock-names = "topcrm", "apb"; + #thermal-sensor-cells = <0>; + }; + +Example for cooling device: + + cooling_dev: cooling_dev { + cluster0_cooling_dev: cluster0-cooling-dev { + #cooling-cells = <2>; + cpumask = <0xf>; + capacitance = <1500>; + }; + + cluster1_cooling_dev: cluster1-cooling-dev { + #cooling-cells = <2>; + cpumask = <0x30>; + capacitance = <2000>; + }; + }; + +Example for thermal zones: + + thermal-zones { + zx296718_thermal: zx296718_thermal { + polling-delay-passive = <500>; + polling-delay = <1000>; + sustainable-power = <6500>; + + thermal-sensors = <&tempsensor 0>; + /* + * slope need to be multiplied by 1000. + */ + coefficients = <1951 (-922)>; + + trips { + trip0: switch_on_temperature { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + trip1: desired_temperature { + temperature = <100000>; + hysteresis = <2000>; + type = "passive"; + }; + + crit: critical_temperature { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&trip0>; + cooling-device = <&gpu 2 5>; + }; + + map1 { + trip = <&trip0>; + cooling-device = <&cluster0_cooling_dev 1 2>; + }; + + map2 { + trip = <&trip1>; + cooling-device = <&cluster0_cooling_dev 1 2>; + }; + + map3 { + trip = <&crit>; + cooling-device = <&cluster0_cooling_dev 1 2>; + }; + + map4 { + trip = <&trip0>; + cooling-device = <&cluster1_cooling_dev 1 2>; + contribution = <9000>; + }; + + map5 { + trip = <&trip1>; + cooling-device = <&cluster1_cooling_dev 1 2>; + contribution = <4096>; + }; + + map6 { + trip = <&crit>; + cooling-device = <&cluster1_cooling_dev 1 2>; + contribution = <4096>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 71d315f65aba..ec0bfb9bbebd 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -195,6 +195,7 @@ mpl MPL AG mqmaker mqmaker Inc. msi Micro-Star International Co. Ltd. mti Imagination Technologies Ltd. (formerly MIPS Technologies Inc.) +multi-inno Multi-Inno Technology Co.,Ltd mundoreader Mundo Reader S.L. murata Murata Manufacturing Co., Ltd. mxicy Macronix International Co., Ltd. @@ -204,6 +205,7 @@ nec NEC LCD Technologies, Ltd. neonode Neonode Inc. netgear NETGEAR netlogic Broadcom Corporation (formerly NetLogic Microsystems) +netron-dy Netron DY netxeon Shenzhen Netxeon Technology CO., LTD nexbox Nexbox newhaven Newhaven Display International @@ -305,6 +307,7 @@ technologic Technologic Systems terasic Terasic Inc. thine THine Electronics, Inc. ti Texas Instruments +tianma Tianma Micro-electronics Co., Ltd. tlm Trusted Logic Mobility topeet Topeet toradex Toradex AG diff --git a/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt b/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt new file mode 100644 index 000000000000..bc4b865d178b --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cortina,gemin-watchdog.txt @@ -0,0 +1,17 @@ +Cortina Systems Gemini SoC Watchdog + +Required properties: +- compatible : must be "cortina,gemini-watchdog" +- reg : shall contain base register location and length +- interrupts : shall contain the interrupt for the watchdog + +Optional properties: +- timeout-sec : the default watchdog timeout in seconds. + +Example: + +watchdog@41000000 { + compatible = "cortina,gemini-watchdog"; + reg = <0x41000000 0x1000>; + interrupts = <3 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt index 8f3d96af81d7..1f6e101e299a 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.txt @@ -6,10 +6,11 @@ occurred. Required properties: - compatible : should be one among the following - (a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs - (b) "samsung,exynos5250-wdt" for Exynos5250 - (c) "samsung,exynos5420-wdt" for Exynos5420 - (c) "samsung,exynos7-wdt" for Exynos7 + - "samsung,s3c2410-wdt" for S3C2410 + - "samsung,s3c6410-wdt" for S3C6410, S5PV210 and Exynos4 + - "samsung,exynos5250-wdt" for Exynos5250 + - "samsung,exynos5420-wdt" for Exynos5420 + - "samsung,exynos7-wdt" for Exynos7 - reg : base physical address of the controller and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt new file mode 100644 index 000000000000..06ce67766756 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/zte,zx2967-wdt.txt @@ -0,0 +1,32 @@ +ZTE zx2967 Watchdog timer + +Required properties: + +- compatible : should be one of the following. + * zte,zx296718-wdt +- reg : Specifies base physical address and size of the registers. +- clocks : Pairs of phandle and specifier referencing the controller's clocks. +- resets : Reference to the reset controller controlling the watchdog + controller. + +Optional properties: + +- timeout-sec : Contains the watchdog timeout in seconds. +- zte,wdt-reset-sysctrl : Directs how to reset system by the watchdog. + if we don't want to restart system when watchdog been triggered, + it's not required, vice versa. + It should include following fields. + * phandle of aon-sysctrl. + * offset of register that be written, should be 0xb0. + * configure value that be written to aon-sysctrl. + * bit mask, corresponding bits will be affected. + +Example: + +wdt: watchdog@1465000 { + compatible = "zte,zx296718-wdt"; + reg = <0x1465000 0x1000>; + clocks = <&topcrm WDT_WCLK>; + resets = <&toprst 35>; + zte,wdt-reset-sysctrl = <&aon_sysctrl 0xb0 1 0x115>; +}; |