diff options
Diffstat (limited to 'Documentation/dvb/bt8xx.txt')
| -rw-r--r-- | Documentation/dvb/bt8xx.txt | 64 |
1 files changed, 52 insertions, 12 deletions
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt index cb63b7a93c82..df6c05453cb5 100644 --- a/Documentation/dvb/bt8xx.txt +++ b/Documentation/dvb/bt8xx.txt @@ -1,5 +1,5 @@ -How to get the Nebula, PCTV and Twinhan DST cards working -========================================================= +How to get the Nebula, PCTV, FusionHDTV Lite and Twinhan DST cards working +========================================================================== This class of cards has a bt878a as the PCI interface, and require the bttv driver. @@ -26,27 +26,31 @@ Furthermore you need to enable In general you need to load the bttv driver, which will handle the gpio and i2c communication for us, plus the common dvb-bt8xx device driver. -The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and -TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver. +The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110), TwinHan (dst), +FusionHDTV DVB-T Lite (mt352) and FusionHDTV5 Lite (lgdt330x) are loaded +automatically by the dvb-bt8xx device driver. -3a) Nebula / Pinnacle PCTV --------------------------- +3a) Nebula / Pinnacle PCTV / FusionHDTV Lite +--------------------------------------------- $ modprobe bttv (normally bttv is being loaded automatically by kmod) - $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading) + $ modprobe dvb-bt8xx + +(or just place dvb-bt8xx in /etc/modules for automatic loading) 3b) TwinHan and Clones -------------------------- - $ modprobe bttv i2c_hw=1 card=0x71 + $ modprobe bttv card=0x71 $ modprobe dvb-bt8xx $ modprobe dst The value 0x71 will override the PCI type detection for dvb-bt8xx, -which is necessary for TwinHan cards. +which is necessary for TwinHan cards. Omission of this parameter might result +in a system lockup. -If you're having an older card (blue color circuit) and card=0x71 locks +If you're having an older card (blue color PCB) and card=0x71 locks up your machine, try using 0x68, too. If that does not work, ask on the mailing list. @@ -64,11 +68,47 @@ verbose=0 means complete disabling of messages dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card. 0x20 means it has a Conditional Access slot. -The autodected values are determined bythe cards 'response -string' which you can see in your logs e.g. +The autodetected values are determined by the cards 'response string' +which you can see in your logs e.g. dst_get_device_id: Recognise [DSTMCI] +If you need to sent in bug reports on the dst, please do send in a complete +log with the verbose=4 module parameter. For general usage, the default setting +of verbose=1 is ideal. + + +4) Multiple cards +-------------------------- + +If you happen to be running multiple cards, it would be advisable to load +the bttv module with the card id. This would help to solve any module loading +problems that you might face. + +For example, if you have a Twinhan and Clones card along with a FusionHDTV5 Lite + + $ modprobe bttv card=0x71 card=0x87 + +Here the order of the card id is important and should be the same as that of the +physical order of the cards. Here card=0x71 represents the Twinhan and clones +and card=0x87 represents Fusion HDTV5 Lite. These arguments can also be +specified in decimal, rather than hex: + + $ modprobe bttv card=113 card=135 + +Some examples of card-id's + +Pinnacle Sat 0x5e (94) +Nebula Digi TV 0x68 (104) +PC HDTV 0x70 (112) +Twinhan 0x71 (113) +FusionHDTV DVB-T Lite 0x80 (128) +FusionHDTV5 Lite 0x87 (135) + +For a full list of card-id's, see the V4L Documentation within the kernel +source: linux/Documentation/video4linux/CARDLIST.bttv + +If you have problems with this please do ask on the mailing list. -- Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham |