diff options
Diffstat (limited to 'Documentation/gpu/drm-kms.rst')
| -rw-r--r-- | Documentation/gpu/drm-kms.rst | 270 |
1 files changed, 53 insertions, 217 deletions
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 8dfa4b214b96..fa948b4e029b 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -2,9 +2,6 @@ Kernel Mode Setting (KMS) ========================= -Mode Setting -============ - Drivers must initialize the mode setting core by calling :c:func:`drm_mode_config_init()` on the DRM device. The function initializes the :c:type:`struct drm_device <drm_device>` @@ -18,60 +15,50 @@ be setup by initializing the following fields. - struct drm_mode_config_funcs \*funcs; Mode setting functions. -Display Modes Function Reference --------------------------------- +KMS Data Structures +=================== -.. kernel-doc:: include/drm/drm_modes.h +.. kernel-doc:: include/drm/drm_crtc.h :internal: -.. kernel-doc:: drivers/gpu/drm/drm_modes.c +KMS API Functions +================= + +.. kernel-doc:: drivers/gpu/drm/drm_crtc.c :export: Atomic Mode Setting Function Reference --------------------------------------- +====================================== .. kernel-doc:: drivers/gpu/drm/drm_atomic.c :export: -.. kernel-doc:: drivers/gpu/drm/drm_atomic.c +.. kernel-doc:: include/drm/drm_atomic.h :internal: Frame Buffer Abstraction ------------------------- - -Frame buffers are abstract memory objects that provide a source of -pixels to scanout to a CRTC. Applications explicitly request the -creation of frame buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls -and receive an opaque handle that can be passed to the KMS CRTC control, -plane configuration and page flip functions. - -Frame buffers rely on the underneath memory manager for low-level memory -operations. When creating a frame buffer applications pass a memory -handle (or a list of memory handles for multi-planar formats) through -the ``drm_mode_fb_cmd2`` argument. For drivers using GEM as their -userspace buffer management interface this would be a GEM handle. -Drivers are however free to use their own backing storage object -handles, e.g. vmwgfx directly exposes special TTM handles to userspace -and so expects TTM handles in the create ioctl and not GEM handles. - -The lifetime of a drm framebuffer is controlled with a reference count, -drivers can grab additional references with -:c:func:`drm_framebuffer_reference()`and drop them again with -:c:func:`drm_framebuffer_unreference()`. For driver-private -framebuffers for which the last reference is never dropped (e.g. for the -fbdev framebuffer when the struct :c:type:`struct drm_framebuffer -<drm_framebuffer>` is embedded into the fbdev helper struct) -drivers can manually clean up a framebuffer at module unload time with -:c:func:`drm_framebuffer_unregister_private()`. +======================== + +.. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c + :doc: overview + +Frame Buffer Functions Reference +-------------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_framebuffer.c + :export: + +.. kernel-doc:: include/drm/drm_framebuffer.h + :internal: DRM Format Handling -------------------- +=================== .. kernel-doc:: drivers/gpu/drm/drm_fourcc.c :export: Dumb Buffer Objects -------------------- +=================== The KMS API doesn't standardize backing storage object creation and leaves it to driver-specific ioctls. Furthermore actually creating a @@ -114,14 +101,29 @@ Note that dumb objects may not be used for gpu acceleration, as has been attempted on some ARM embedded platforms. Such drivers really must have a hardware-specific ioctl to allocate suitable buffer objects. -Output Polling --------------- +Display Modes Function Reference +================================ + +.. kernel-doc:: include/drm/drm_modes.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_modes.c + :export: + +Connector Abstraction +===================== + +.. kernel-doc:: drivers/gpu/drm/drm_connector.c + :doc: overview -void (\*output_poll_changed)(struct drm_device \*dev); -This operation notifies the driver that the status of one or more -connectors has changed. Drivers that use the fb helper can just call the -:c:func:`drm_fb_helper_hotplug_event()` function to handle this -operation. +Connector Functions Reference +----------------------------- + +.. kernel-doc:: include/drm/drm_connector.h + :internal: + +.. kernel-doc:: drivers/gpu/drm/drm_connector.c + :export: KMS Initialization and Cleanup ============================== @@ -236,166 +238,6 @@ encoders unattached at initialization time. Applications (or the fbdev compatibility layer when implemented) are responsible for attaching the encoders they want to use to a CRTC. -Connectors (:c:type:`struct drm_connector <drm_connector>`) ------------------------------------------------------------ - -A connector is the final destination for pixel data on a device, and -usually connects directly to an external display device like a monitor -or laptop panel. A connector can only be attached to one encoder at a -time. The connector is also the structure where information about the -attached display is kept, so it contains fields for display data, EDID -data, DPMS & connection status, and information about modes supported on -the attached displays. - -Connector Initialization -~~~~~~~~~~~~~~~~~~~~~~~~ - -Finally a KMS driver must create, initialize, register and attach at -least one :c:type:`struct drm_connector <drm_connector>` -instance. The instance is created as other KMS objects and initialized -by setting the following fields. - -interlace_allowed - Whether the connector can handle interlaced modes. - -doublescan_allowed - Whether the connector can handle doublescan. - -display_info - Display information is filled from EDID information when a display - is detected. For non hot-pluggable displays such as flat panels in - embedded systems, the driver should initialize the - display_info.width_mm and display_info.height_mm fields with the - physical size of the display. - -polled - Connector polling mode, a combination of - - DRM_CONNECTOR_POLL_HPD - The connector generates hotplug events and doesn't need to be - periodically polled. The CONNECT and DISCONNECT flags must not - be set together with the HPD flag. - - DRM_CONNECTOR_POLL_CONNECT - Periodically poll the connector for connection. - - DRM_CONNECTOR_POLL_DISCONNECT - Periodically poll the connector for disconnection. - - Set to 0 for connectors that don't support connection status - discovery. - -The connector is then registered with a call to -:c:func:`drm_connector_init()` with a pointer to the connector -functions and a connector type, and exposed through sysfs with a call to -:c:func:`drm_connector_register()`. - -Supported connector types are - -- DRM_MODE_CONNECTOR_VGA -- DRM_MODE_CONNECTOR_DVII -- DRM_MODE_CONNECTOR_DVID -- DRM_MODE_CONNECTOR_DVIA -- DRM_MODE_CONNECTOR_Composite -- DRM_MODE_CONNECTOR_SVIDEO -- DRM_MODE_CONNECTOR_LVDS -- DRM_MODE_CONNECTOR_Component -- DRM_MODE_CONNECTOR_9PinDIN -- DRM_MODE_CONNECTOR_DisplayPort -- DRM_MODE_CONNECTOR_HDMIA -- DRM_MODE_CONNECTOR_HDMIB -- DRM_MODE_CONNECTOR_TV -- DRM_MODE_CONNECTOR_eDP -- DRM_MODE_CONNECTOR_VIRTUAL - -Connectors must be attached to an encoder to be used. For devices that -map connectors to encoders 1:1, the connector should be attached at -initialization time with a call to -:c:func:`drm_mode_connector_attach_encoder()`. The driver must -also set the :c:type:`struct drm_connector <drm_connector>` -encoder field to point to the attached encoder. - -Finally, drivers must initialize the connectors state change detection -with a call to :c:func:`drm_kms_helper_poll_init()`. If at least -one connector is pollable but can't generate hotplug interrupts -(indicated by the DRM_CONNECTOR_POLL_CONNECT and -DRM_CONNECTOR_POLL_DISCONNECT connector flags), a delayed work will -automatically be queued to periodically poll for changes. Connectors -that can generate hotplug interrupts must be marked with the -DRM_CONNECTOR_POLL_HPD flag instead, and their interrupt handler must -call :c:func:`drm_helper_hpd_irq_event()`. The function will -queue a delayed work to check the state of all connectors, but no -periodic polling will be done. - -Connector Operations -~~~~~~~~~~~~~~~~~~~~ - - **Note** - - Unless otherwise state, all operations are mandatory. - -DPMS -'''' - -void (\*dpms)(struct drm_connector \*connector, int mode); -The DPMS operation sets the power state of a connector. The mode -argument is one of - -- DRM_MODE_DPMS_ON - -- DRM_MODE_DPMS_STANDBY - -- DRM_MODE_DPMS_SUSPEND - -- DRM_MODE_DPMS_OFF - -In all but DPMS_ON mode the encoder to which the connector is attached -should put the display in low-power mode by driving its signals -appropriately. If more than one connector is attached to the encoder -care should be taken not to change the power state of other displays as -a side effect. Low-power mode should be propagated to the encoders and -CRTCs when all related connectors are put in low-power mode. - -Modes -''''' - -int (\*fill_modes)(struct drm_connector \*connector, uint32_t -max_width, uint32_t max_height); -Fill the mode list with all supported modes for the connector. If the -``max_width`` and ``max_height`` arguments are non-zero, the -implementation must ignore all modes wider than ``max_width`` or higher -than ``max_height``. - -The connector must also fill in this operation its display_info -width_mm and height_mm fields with the connected display physical size -in millimeters. The fields should be set to 0 if the value isn't known -or is not applicable (for instance for projector devices). - -Connection Status -''''''''''''''''' - -The connection status is updated through polling or hotplug events when -supported (see ?). The status value is reported to userspace through -ioctls and must not be used inside the driver, as it only gets -initialized by a call to :c:func:`drm_mode_getconnector()` from -userspace. - -enum drm_connector_status (\*detect)(struct drm_connector -\*connector, bool force); -Check to see if anything is attached to the connector. The ``force`` -parameter is set to false whilst polling or to true when checking the -connector due to user request. ``force`` can be used by the driver to -avoid expensive, destructive operations during automated probing. - -Return connector_status_connected if something is connected to the -connector, connector_status_disconnected if nothing is connected and -connector_status_unknown if the connection state isn't known. - -Drivers should only return connector_status_connected if the -connection status has really been probed as connected. Connectors that -can't detect the connection status, or failed connection status probes, -should return connector_status_unknown. - Cleanup ------- @@ -463,20 +305,8 @@ created for fetching EDID data and performing monitor detection. Once the process is complete, the new connector is registered with sysfs to make its properties available to applications. -KMS API Functions ------------------ - -.. kernel-doc:: drivers/gpu/drm/drm_crtc.c - :export: - -KMS Data Structures -------------------- - -.. kernel-doc:: include/drm/drm_crtc.h - :internal: - KMS Locking ------------ +=========== .. kernel-doc:: drivers/gpu/drm/drm_modeset_lock.c :doc: kms locking @@ -575,6 +405,12 @@ connector and plane objects by calling the pointer to the target object, a pointer to the previously created property and an initial instance value. +Blending and Z-Position properties +---------------------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_blend.c + :export: + Existing KMS Properties ----------------------- |