diff options
Diffstat (limited to 'Documentation/hwmon/sg2042-mcu.rst')
-rw-r--r-- | Documentation/hwmon/sg2042-mcu.rst | 78 |
1 files changed, 78 insertions, 0 deletions
diff --git a/Documentation/hwmon/sg2042-mcu.rst b/Documentation/hwmon/sg2042-mcu.rst new file mode 100644 index 000000000000..077e79841d2e --- /dev/null +++ b/Documentation/hwmon/sg2042-mcu.rst @@ -0,0 +1,78 @@ +.. SPDX-License-Identifier: GPL-2.0 + +Kernel driver sg2042-mcu +======================== + +Supported chips: + + * Onboard MCU for sg2042 + + Addresses scanned: - + + Prefix: 'sg2042-mcu' + +Authors: + + - Inochi Amaoto <inochiama@outlook.com> + +Description +----------- + +This driver supprts hardware monitoring for onboard MCU with +i2c interface. + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate +the devices explicitly. +Please see Documentation/i2c/instantiating-devices.rst for details. + +Sysfs Attributes +---------------- + +The following table shows the standard entries support by the driver: + +================= ===================================================== +Name Description +================= ===================================================== +temp1_input Measured temperature of SoC +temp1_crit Critical high temperature +temp1_crit_hyst hysteresis temperature restore from Critical +temp2_input Measured temperature of the base board +================= ===================================================== + +The following table shows the extra entries support by the driver +(the MCU device is in i2c subsystem): + +================= ======= ============================================= +Name Perm Description +================= ======= ============================================= +reset_count RO Reset count of the SoC +uptime RO Seconds after the MCU is powered +reset_reason RO Reset reason for the last reset +repower_policy RW Execution policy when triggering repower +================= ======= ============================================= + +``repower_policy`` + The repower is triggered when the temperature of the SoC falls below + the hysteresis temperature after triggering a shutdown due to + reaching the critical temperature. + The valid values for this entry are "repower" and "keep". "keep" will + leave the SoC down when the triggering repower, and "repower" will + boot the SoC. + +Debugfs Interfaces +------------------ + +If debugfs is available, this driver exposes some hardware specific +data in ``/sys/kernel/debug/sg2042-mcu/*/``. + +================= ======= ============================================= +Name Format Description +================= ======= ============================================= +firmware_version 0x%02x firmware version of the MCU +pcb_version 0x%02x version number of the base board +board_type 0x%02x identifiers for the base board +mcu_type %d type of the MCU: 0 is STM32, 1 is GD32 +================= ======= ============================================= |