diff options
Diffstat (limited to '')
| -rw-r--r-- | Documentation/i2c/busses/i2c-ali15x3 | 16 |
1 files changed, 8 insertions, 8 deletions
diff --git a/Documentation/i2c/busses/i2c-ali15x3 b/Documentation/i2c/busses/i2c-ali15x3 index ff28d381bebe..600da90b8f12 100644 --- a/Documentation/i2c/busses/i2c-ali15x3 +++ b/Documentation/i2c/busses/i2c-ali15x3 @@ -6,8 +6,8 @@ Supported adapters: http://www.ali.com.tw/eng/support/datasheet_request.php Authors: - Frodo Looijaard <frodol@dds.nl>, - Philip Edelbrock <phil@netroedge.com>, + Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, Mark D. Studebaker <mdsxyz123@yahoo.com> Module Parameters @@ -40,10 +40,10 @@ M1541 and M1543C South Bridges. The M1543C is a South bridge for desktop systems. The M1541 is a South bridge for portable systems. They are part of the following ALI chipsets: - - * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and + + * "Aladdin Pro 2" includes the M1621 Slot 1 North bridge with AGP and 100MHz CPU Front Side bus - * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz + * "Aladdin V" includes the M1541 Socket 7 North bridge with AGP and 100MHz CPU Front Side bus Some Aladdin V motherboards: Asus P5A @@ -77,7 +77,7 @@ output of lspci will show something similar to the following: ** then run lspci. ** If you see the 1533 and 5229 devices but NOT the 7101 device, ** then you must enable ACPI, the PMU, SMB, or something similar -** in the BIOS. +** in the BIOS. ** The driver won't work if it can't find the M7101 device. The SMB controller is part of the M7101 device, which is an ACPI-compliant @@ -87,8 +87,8 @@ The whole M7101 device has to be enabled for the SMB to work. You can't just enable the SMB alone. The SMB and the ACPI have separate I/O spaces. We make sure that the SMB is enabled. We leave the ACPI alone. -Features --------- +Features +-------- This driver controls the SMB Host only. The SMB Slave controller on the M15X3 is not enabled. This driver does not use |